RAISECOM-FANMONITOR-MIB
- Registered at
- 1.3.6.1.4.1.8886.1.1.5
- Last updated
- 2010-12-27 00:00
- Organization
- Raisecom, Inc.
- Revisions
- 2010-12-30 00:00
- Namespace
- raisecom
- Source file
RAISECOM-FANMONITOR-MIB- Digest
sha256:8018493457a125628523069b032b526ba3527aa5679ae26ca02ffe46844deebc
Description
Configuration of fanMonitor object.
Contact
Raise Systems Postal: Beijing, China Tel: 86-010-82884499 E-mail: support@raisecom.com
Imports
| From | Symbols |
|---|---|
| RAISECOM-SYSTEM-MIB | raisecomSystem |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
RAISECOM-BASE-MIB RAISECOM-FANMONITOR-MIB RAISECOM-SYSTEM-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC SWITCH-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| raisecomFanMonitorNotification OBJECT-IDENTITY | 1.3.6.1.4.1.8886.1.1.5.1 | |||
| raisecomFanMonitorMibObjects OBJECT-IDENTITY | 1.3.6.1.4.1.8886.1.1.5.2 | |||
| raisecomFanMonitorGlobalGroup OBJECT-IDENTITY | 1.3.6.1.4.1.8886.1.1.5.2.1 | |||
| raisecomFanMonitorMode OBJECT-TYPE An integer value that specify the current monitor mode. ENFORCE(1) means that the fan speed need to set manully; AUTO(2) means that the fan speed will ajusted autoly according to the temperature | 1.3.6.1.4.1.8886.1.1.5.2.1.1 | INTEGER {enforce(1), auto(2)} | read-write | current |
| raisecomFanMonitorSpdLevel OBJECT-TYPE Specify the speed level of fan in enforce mode. | 1.3.6.1.4.1.8886.1.1.5.2.1.2 | Unsigned32 (1..4) | read-write | current |
| raisecomFanMonitorNumber OBJECT-TYPE Specify the number of fan being monitorred. | 1.3.6.1.4.1.8886.1.1.5.2.1.3 | Unsigned32 | read-only | current |
| raisecomFanMonitorLevlNumber OBJECT-TYPE Specify the total number of fan speed levels. | 1.3.6.1.4.1.8886.1.1.5.2.1.4 | Unsigned32 | read-only | current |
| raisecomFanCardState OBJECT-TYPE Specify the current state of fan cards. all_down(1) means that all fan cards are down; all_up(2) means that all fan cards are up; card1_up(3) means that fan card 1 is up, the others are down; card2_up(4) means that fan card 2 is up, the others are down. | 1.3.6.1.4.1.8886.1.1.5.2.1.5 | INTEGER {all-down(1), all-up(2), card1-up(3), card2-up(4)} | read-only | current |
| raisecomFanCardSerialNumber OBJECT-TYPE specify the identical serial number of current fan card,this string number will be set when device leaving factory | 1.3.6.1.4.1.8886.1.1.5.2.1.6 | OCTET STRING | read-only | current |
| raisecomFanMonitorTrapSendEnable OBJECT-TYPE Specifies the status of sending trap | 1.3.6.1.4.1.8886.1.1.5.2.1.7 | INTEGER {disable(0), enable(1)} | read-write | current |
| raisecomFanMonitorStateTable OBJECT-TYPE Fan monitor state table. | 1.3.6.1.4.1.8886.1.1.5.2.2 | not-accessible | current | |
| raisecomFanMonitorStateEntry OBJECT-TYPE Fan monitor state entry. | 1.3.6.1.4.1.8886.1.1.5.2.2.1 | not-accessible | current | |
| raisecomFanIndex OBJECT-TYPE Specify the sequence number of fan. | 1.3.6.1.4.1.8886.1.1.5.2.2.1.1 | Unsigned32 | not-accessible | current |
| raisecomFanSpeedValue OBJECT-TYPE Specify the actural speed of the current fan. | 1.3.6.1.4.1.8886.1.1.5.2.2.1.2 | Unsigned32 | read-only | current |
| raisecomFanWorkState OBJECT-TYPE Specify the current state of fan normal(1) means the current fan operate normally; abnormal(2) means the current fan operate abnormally | 1.3.6.1.4.1.8886.1.1.5.2.2.1.3 | INTEGER {normal(1), abnormal(2)} | read-only | current |
| raisecomFanSpeedCurrentLevel OBJECT-TYPE Specify the temperature scale border that match the speed levle, based on this scale border,the current fan speed will ajusted autoly according to the current temperature | 1.3.6.1.4.1.8886.1.1.5.2.2.1.4 | Unsigned32 (1..4) | read-only | current |
| raisecomFanSpeedLevelTable OBJECT-TYPE fan speed level information table. | 1.3.6.1.4.1.8886.1.1.5.2.3 | not-accessible | current | |
| raisecomFanSpeedLevelEntry OBJECT-TYPE fan speed level information entry. | 1.3.6.1.4.1.8886.1.1.5.2.3.1 | not-accessible | current | |
| raisecomFanSpeedLevelIndex OBJECT-TYPE Specify the fan speed level index. | 1.3.6.1.4.1.8886.1.1.5.2.3.1.1 | Unsigned32 | not-accessible | current |
| raisecomFanSpeedDueValue OBJECT-TYPE Specify the speed value that match the fan levle index. this value can ben get from a new or normal fan ,not an used fan ,because the used fan may be aged | 1.3.6.1.4.1.8886.1.1.5.2.3.1.2 | Unsigned32 | read-only | current |
| raisecomFanSpeedTemperatureScale OBJECT-TYPE Specify the temperature scale border that match the speed levle, based on this scale border,the current fan speed will ajusted autoly according to the current temperature | 1.3.6.1.4.1.8886.1.1.5.2.3.1.3 | Unsigned32 (45..75) | read-write | current |
Notifications
| Name | OID | Status |
|---|---|---|
| raisecomFanSpeedNormal NOTIFICATION-TYPE The trap notification occur when fan state translating from abnormal to normal. | 1.3.6.1.4.1.8886.1.1.5.1.1 | current |
| raisecomFanSpeedAbnormal NOTIFICATION-TYPE The trap notification occur when fan state translatingfrom normal to abnormal. | 1.3.6.1.4.1.8886.1.1.5.1.2 | current |
| raisecomFanCardUp NOTIFICATION-TYPE The trap notification occur when fan card state translating from down to up. | 1.3.6.1.4.1.8886.1.1.5.1.3 | current |
| raisecomFanCardDown NOTIFICATION-TYPE The trap notification occur when fan card state translating from up to down. | 1.3.6.1.4.1.8886.1.1.5.1.4 | current |