MIBs Depot

RADWIN-MIB-WINLINK1000

Registered at
1.3.6.1.4.1.4458
Namespace
radwin
Source file
RADWIN-MIB-WINLINK1000
Digest
sha256:290117d3ad6d687fb4646c55e8605853650630cb3e382072c43357f07f5dbf56

Imports

FromSymbols
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Gauge32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, enterprises, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
RADWIN-MIB-WINLINK1000
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
radwin
OBJECT-IDENTITY
1.3.6.1.4.1.4458
radwinProducts
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20
winlink1000Family
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.2
odu
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.2.1
oduIntegratedAntenna
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.2.1.1
oduExternalAntenna
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.2.1.2
radwin2000Family
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.3
odu2000
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.3.1
odu2KIntegratedAntenna
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.3.1.1
odu2KExternalAntenna
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.3.1.2
gpsSynchronizerFamily
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.4
oduGSU
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.4.1
oduGSUExternalAntenna
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.4.1.2
hssSyncUnits
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.4.2
hssISU
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.4.2.1
hssGSU
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.4.2.2
radwin5000HBSFamily
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.5
oduHBS
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.5.1
oduHBSIntegratedAntenna
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.5.1.1
oduHBSExternalAntenna
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.5.1.2
radwin5000HSUFamily
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.6
oduHSU
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.6.1
oduHSUIntegratedAntenna
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.6.1.1
oduHSUExternalAntenna
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.6.1.2
radwin6000Family
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.10
odu6000
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.10.1
odu6K
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.10.1.1
gateway6000
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.10.2
gateway6K
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.10.2.1
radwinWiFiAPFamily
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.20
odu600
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.20.1
oduWiFiAP
OBJECT-IDENTITY
1.3.6.1.4.1.4458.20.20.1.1
winlink1000
OBJECT-IDENTITY
1.3.6.1.4.1.4458.1000
winlink1000Odu
OBJECT-IDENTITY
1.3.6.1.4.1.4458.1000.1
winlink1000OduAdmin
OBJECT-IDENTITY
1.3.6.1.4.1.4458.1000.1.1
winlink1000OduAdmProductType
OBJECT-TYPE
ODU configuration description.
1.3.6.1.4.1.4458.1000.1.1.1DisplayStringread-onlymandatory
winlink1000OduAdmHwRev
OBJECT-TYPE
ODU Hardware Version.
1.3.6.1.4.1.4458.1000.1.1.2DisplayStringread-onlymandatory
winlink1000OduAdmSwRev
OBJECT-TYPE
ODU Software Version.
1.3.6.1.4.1.4458.1000.1.1.3DisplayStringread-onlymandatory
winlink1000OduAdmLinkName
OBJECT-TYPE
Link Name. A change is effective immediately.
1.3.6.1.4.1.4458.1000.1.1.4DisplayStringread-writemandatory
winlink1000OduAdmResetCmd
OBJECT-TYPE
Reset Command. A set command with a value of 3 will cause a device reset. HBS only: A set command with a value of 4 will cause a device reset for the entire sector. The read value is always 0.
1.3.6.1.4.1.4458.1000.1.1.5INTEGERread-writemandatory
winlink1000OduAdmAddres
OBJECT-TYPE
ODU IP address. A change is effective after reset. The parameter is kept for backward compatibility. Using the alternative parameter: winlink1000OduAdmIpParamsCnfg is recommended.
1.3.6.1.4.1.4458.1000.1.1.6IpAddressread-writemandatory
winlink1000OduAdmMask
OBJECT-TYPE
ODU Subnet Mask. A change is effective after reset. The parameter is kept for backward compatibility. Using the alternative parameter: winlink1000OduAdmIpParamsCnfg is recommended.
1.3.6.1.4.1.4458.1000.1.1.7IpAddressread-writemandatory
winlink1000OduAdmGateway
OBJECT-TYPE
ODU default gateway. A change is effective after reset. The parameter is kept for backward compatibility. Using the alternative parameter: winlink1000OduAdmIpParamsCnfg is recommended.
1.3.6.1.4.1.4458.1000.1.1.8IpAddressread-writemandatory
winlink1000OduAdmBroadcast
OBJECT-TYPE
This parameter is reserved for the Manager application provided with the product.
1.3.6.1.4.1.4458.1000.1.1.10INTEGERread-writemandatory
winlink1000OduAdmHostsTable
OBJECT-TYPE
Trap destinations table. Each trap destination is defined by an IP address and a UDP port. Up to 10 addresses can be configured.
1.3.6.1.4.1.4458.1000.1.1.12not-accessiblemandatory
winlink1000OduAdmHostsEntry
OBJECT-TYPE
Trap destinations table entry.
1.3.6.1.4.1.4458.1000.1.1.12.1not-accessiblemandatory
winlink1000OduAdmHostsIndex
OBJECT-TYPE
Trap destinations table index.
1.3.6.1.4.1.4458.1000.1.1.12.1.1INTEGERread-onlymandatory
winlink1000OduAdmHostsIp
OBJECT-TYPE
Trap destination IP address. A change is effective immediately.
1.3.6.1.4.1.4458.1000.1.1.12.1.2IpAddressread-writemandatory
winlink1000OduAdmHostsPort
OBJECT-TYPE
UDP port of the trap destination. A change is effective immediately.
1.3.6.1.4.1.4458.1000.1.1.12.1.3INTEGER (1..65535)read-writemandatory
winlink1000OduAdmHostsSecurityModel
OBJECT-TYPE
Security model used for this trap generation.
1.3.6.1.4.1.4458.1000.1.1.12.1.4INTEGER {snmpv1(1), snmpv3(3)}read-writemandatory
winlink1000OduAdmHostsUserName
OBJECT-TYPE
User name used to generate the snmpv3 trap.
1.3.6.1.4.1.4458.1000.1.1.12.1.5DisplayStringread-writemandatory
winlink1000OduAdmHostsPassword
OBJECT-TYPE
Password used to generate the snmpv3 trap.
1.3.6.1.4.1.4458.1000.1.1.12.1.6DisplayStringread-writemandatory
winlink1000OduAdmHostsIPv6
OBJECT-TYPE
Trap destination IPv6 address. A change is effective immediately.
1.3.6.1.4.1.4458.1000.1.1.12.1.7DisplayStringread-writemandatory
winlink1000OduBuzzerAdminState
OBJECT-TYPE
This parameter controls the activation of the buzzer while the unit is in install mode. A change is effective immediately. The valid values are: disabled (0), enabledAuto (1), enabledConstantly(2), advancedAuto (3).
1.3.6.1.4.1.4458.1000.1.1.13INTEGERread-writemandatory
winlink1000OduProductId
OBJECT-TYPE
This parameter is reserved for the Manager application provided with the product.
1.3.6.1.4.1.4458.1000.1.1.14DisplayStringread-onlymandatory
winlink1000OduReadCommunity
OBJECT-TYPE
Read Community String. This parameter always returns ***** when retrieving its value. It is used by the Manager application to change the Read Community String. The SNMP agent accepts only encrypted values.
1.3.6.1.4.1.4458.1000.1.1.15DisplayStringread-writemandatory
winlink1000OduReadWriteCommunity
OBJECT-TYPE
Read/Write Community String. This parameter always returns ***** when retrieving its value. It is used by the Manager application to change the Read/Write Community String. The SNMP agent accepts only encrypted values.
1.3.6.1.4.1.4458.1000.1.1.16DisplayStringread-writemandatory
winlink1000OduTrapCommunity
OBJECT-TYPE
Trap Community String. This parameter is used by the Manager application to change the Trap Community String. The SNMP agent accepts only encrypted values.
1.3.6.1.4.1.4458.1000.1.1.17DisplayStringread-writemandatory
winlink1000OduAdmSnmpAgentVersion
OBJECT-TYPE
Major version of the SNMP agent.
1.3.6.1.4.1.4458.1000.1.1.18INTEGERread-onlymandatory
winlink1000OduAdmRemoteSiteName
OBJECT-TYPE
Remote site name. Returns the same value as sysLocation parameter of the remote site.
1.3.6.1.4.1.4458.1000.1.1.19DisplayStringread-onlymandatory
winlink1000OduAdmSnmpAgentMinorVersion
OBJECT-TYPE
Minor version of the SNMP agent.
1.3.6.1.4.1.4458.1000.1.1.20INTEGERread-onlymandatory
winlink1000OduAdmLinkPassword
OBJECT-TYPE
Link Password. This parameter always returns ***** when retrieving its value. It is used by the Manager application to change the Link Password. The SNMP agent accepts only encrypted values.
1.3.6.1.4.1.4458.1000.1.1.21DisplayStringread-writemandatory
winlink1000OduAdmSiteLinkPassword
OBJECT-TYPE
Site Link Password. This parameter always returns ***** when retrieving its value. It is used by the Manager application to change the Link Password of the site. The SNMP agent accepts only encrypted values.
1.3.6.1.4.1.4458.1000.1.1.22DisplayStringread-writemandatory
winlink1000OduAdmDefaultPassword
OBJECT-TYPE
This parameter indicates if the current Link Password is the default password.
1.3.6.1.4.1.4458.1000.1.1.23INTEGER {default(1), nonDefault(2)}read-onlymandatory
winlink1000OduAdmConnectionType
OBJECT-TYPE
This parameter indicates if the Manager application is connected to the local ODU or to the remote ODU over the air. A value of 'unknown' indicates community string mismatch.
1.3.6.1.4.1.4458.1000.1.1.24INTEGER {directConnection(1), indirectConnection(2), unknown(3)}read-onlymandatory
winlink1000OduAdmBackToFactorySettingsCmd
OBJECT-TYPE
Back to factory settings Command. A change is effective after reset. The read value is always 0.
1.3.6.1.4.1.4458.1000.1.1.25INTEGER {withIP(1), withoutIP(2)}read-writemandatory
winlink1000OduAdmIpParamsCnfg
OBJECT-TYPE
ODU IP address Configuration. The format is: |||
1.3.6.1.4.1.4458.1000.1.1.26DisplayStringread-writemandatory
winlink1000OduAdmVlanID
OBJECT-TYPE
VLAN ID. Valid values are 1 to 4094. Initial value is 0 meaning VLAN unaware.
1.3.6.1.4.1.4458.1000.1.1.27INTEGER (0..4094)read-writemandatory
winlink1000OduAdmVlanPriority
OBJECT-TYPE
VLAN Priority. 0 is lowest priority, 7 is highest priority.
1.3.6.1.4.1.4458.1000.1.1.28INTEGER (0..7)read-writemandatory
winlink1000OduAdmSN
OBJECT-TYPE
ODU Serial Number
1.3.6.1.4.1.4458.1000.1.1.29DisplayStringread-onlymandatory
winlink1000OduAdmProductName
OBJECT-TYPE
This is the product name as it exists at EC
1.3.6.1.4.1.4458.1000.1.1.30DisplayStringread-onlymandatory
winlink1000OduAdmActivationKey
OBJECT-TYPE
Activates a general key.
1.3.6.1.4.1.4458.1000.1.1.31DisplayStringread-writemandatory
winlink1000OduAdmRmtPermittedOduType
OBJECT-TYPE
Mobile Application: permitted partner OduType.
1.3.6.1.4.1.4458.1000.1.1.32DisplayStringread-writemandatory
winlink1000OduAdmCpuID
OBJECT-TYPE
CPU ID
1.3.6.1.4.1.4458.1000.1.1.33INTEGER (0..64)read-onlymandatory
winlink1000OduAdmOvrdCmd
OBJECT-TYPE
Ability to perform special command in the ODU.
1.3.6.1.4.1.4458.1000.1.1.34DisplayStringread-writemandatory
winlink1000OduAdmLinkMode
OBJECT-TYPE
Unit PMP operation mode.
1.3.6.1.4.1.4458.1000.1.1.35INTEGER {pmpHbs(1), pmpHsu(2), pmpHsuHyb(3), pmpHbsHyb(4)}read-writemandatory
winlink1000OduAdmActualConnectMode
OBJECT-TYPE
Unit connected as part to ptp or ptmp.
1.3.6.1.4.1.4458.1000.1.1.36INTEGER {none(1), ptp(2), ptmp(3)}read-onlymandatory
winlink1000OduAdmAES256Support
OBJECT-TYPE
AES-256 security support indication.
1.3.6.1.4.1.4458.1000.1.1.37INTEGER {notSupported(1), supported(2)}read-onlymandatory
winlink1000OduAdmAES256State
OBJECT-TYPE
Enable/Disable AES-256 security mode over the air link.
1.3.6.1.4.1.4458.1000.1.1.38INTEGER {disabled(1), enabled(2)}read-writemandatory
winlink1000OduAdmAES256Status
OBJECT-TYPE
AES256 operating status
1.3.6.1.4.1.4458.1000.1.1.39INTEGER {notOperating(1), partiallyOperating(2), operating(3)}read-onlymandatory
winlink1000OduAdmBatterySavingShutdownTime
OBJECT-TYPE
Battery Saving Shutdown Time in minutes, 0 till battery run out, -1 if not supported.
1.3.6.1.4.1.4458.1000.1.1.40INTEGER (0..1000)read-writemandatory
winlink1000OduAdmWiFiPowerMode
OBJECT-TYPE
WIFI unit power mode.
1.3.6.1.4.1.4458.1000.1.1.41INTEGER {undefined(1), powerON(2), powerOFF(3), alwaysON(4)}read-writemandatory
winlink1000OduAdmShutdownTimer
OBJECT-TYPE
Shutdown Timer in seconds.
1.3.6.1.4.1.4458.1000.1.1.42INTEGER (0..2147483647)read-onlymandatory
winlink1000OduAdmGPSState
OBJECT-TYPE
GPS state
1.3.6.1.4.1.4458.1000.1.1.43INTEGER {undefined(1), notSynchronized(2), fixed(3), shortCircuit(4), faulty(5), synchronized(6), synchronizedGlonass(7)}read-onlymandatory
winlink1000OduAdmTemperatureC
OBJECT-TYPE
The temperature (Celsius) inside the Board.
1.3.6.1.4.1.4458.1000.1.1.44INTEGERread-onlymandatory
winlink1000OduAdmIPStackMode
OBJECT-TYPE
The IP stack mode.
1.3.6.1.4.1.4458.1000.1.1.45INTEGER {v4(1), v6(2), v4andv6(3)}read-writemandatory
winlink1000OduAdmIPv6ParamsCnfg
OBJECT-TYPE
ODU IPv6 address Configuration. The format is: |||
1.3.6.1.4.1.4458.1000.1.1.46DisplayStringread-writemandatory
winlink1000OduAdmIPv6Address
OBJECT-TYPE
ODU IPv6 address.
1.3.6.1.4.1.4458.1000.1.1.47DisplayStringread-onlymandatory
winlink1000OduAdmIPv6Prefix
OBJECT-TYPE
ODU IPv6 subnet mask.
1.3.6.1.4.1.4458.1000.1.1.48INTEGERread-onlymandatory
winlink1000OduAdmIPv6DefaultGateWay
OBJECT-TYPE
ODU IPv6 default gateway.
1.3.6.1.4.1.4458.1000.1.1.49DisplayStringread-onlymandatory
winlink1000OduAdmPowerConsumption
OBJECT-TYPE
Power Consumption (mWatt)
1.3.6.1.4.1.4458.1000.1.1.50INTEGERread-onlymandatory
winlink1000OduAdmWifi
OBJECT-IDENTITY
1.3.6.1.4.1.4458.1000.1.1.51
winlink1000OduAdmWifiChannel
OBJECT-TYPE
Wifi Channel
1.3.6.1.4.1.4458.1000.1.1.51.1INTEGER (1..11)read-writemandatory
winlink1000OduAdmWifiTxPower
OBJECT-TYPE
Wifi TX Power
1.3.6.1.4.1.4458.1000.1.1.51.2INTEGER (11..15)read-writemandatory
winlink1000OduAdmWifiSSID
OBJECT-TYPE
Wifi SSID
1.3.6.1.4.1.4458.1000.1.1.51.3DisplayStringread-onlymandatory
winlink1000OduAdmWifiSecurityType
OBJECT-TYPE
Wifi Security type
1.3.6.1.4.1.4458.1000.1.1.51.4INTEGER {open(1), wep(2), wpa2(3)}read-onlymandatory
winlink1000OduAdmWifiPassword
OBJECT-TYPE
Wifi Password
1.3.6.1.4.1.4458.1000.1.1.51.5DisplayStringread-writemandatory
winlink1000OduAdmWifiNetwork
OBJECT-TYPE
Wifi Network
1.3.6.1.4.1.4458.1000.1.1.51.6IpAddressread-writemandatory
winlink1000OduAdmWifiRssi
OBJECT-TYPE
Wifi RSSI
1.3.6.1.4.1.4458.1000.1.1.51.7INTEGERread-onlymandatory
winlink1000OduAdmWifiStationMAC
OBJECT-TYPE
Wifi Station MAC
1.3.6.1.4.1.4458.1000.1.1.51.8DisplayStringread-onlymandatory
winlink1000OduAdmWifiRestart
OBJECT-TYPE
A set command with a value of 1 will cause a Wifi restart. The read value is always 0.
1.3.6.1.4.1.4458.1000.1.1.51.9INTEGER (1)read-writemandatory
winlink1000OduAdmWifiApStatus
OBJECT-TYPE
Wifi AP Status
1.3.6.1.4.1.4458.1000.1.1.51.10INTEGER {off(1), on(2), connected(3)}read-onlymandatory
winlink1000OduAdmBsaOperationMode
OBJECT-TYPE
BSA Operation Mode
1.3.6.1.4.1.4458.1000.1.1.52INTEGER {inactive(1), hbsTracking(2), hsuAlignment(3)}read-onlymandatory
winlink1000OduAdmMngConnection
OBJECT-TYPE
Management Connection
1.3.6.1.4.1.4458.1000.1.1.53DisplayStringread-writemandatory
winlink1000OduAdm1588TCSupport
OBJECT-TYPE
Indicates that 1588TC license activated
1.3.6.1.4.1.4458.1000.1.1.54INTEGER {notSupported(1), supported(2)}read-onlymandatory
winlink1000OduAdmSyncESupport
OBJECT-TYPE
ndicates that SyncE license activated
1.3.6.1.4.1.4458.1000.1.1.55INTEGER {notSupported(1), supported(2)}read-onlymandatory
winlink1000OduAdmRadioRev
OBJECT-TYPE
Radio Revision
1.3.6.1.4.1.4458.1000.1.1.56DisplayStringread-onlymandatory
winlink1000OduAdmProductRev
OBJECT-TYPE
Product Revision
1.3.6.1.4.1.4458.1000.1.1.57DisplayStringread-onlymandatory
winlink1000OduAdmPMPSUSupport
OBJECT-TYPE
Indicates that PMP SU license is activated
1.3.6.1.4.1.4458.1000.1.1.58INTEGER {notSupported(1), supported(2)}read-onlymandatory
winlink1000OduAdmManagerDownloadURL
OBJECT-TYPE
This is the URL from which management tool can be downloaded
1.3.6.1.4.1.4458.1000.1.1.59DisplayStringread-writemandatory
winlink1000OduAdmAntennaDescription
OBJECT-TYPE
The is a description of the antenna connected to the ODU
1.3.6.1.4.1.4458.1000.1.1.60DisplayStringread-onlymandatory
winlink1000OduAdmSwCapabilities
OBJECT-TYPE
This is used to describe which Software Capabilities the current ODU supports
1.3.6.1.4.1.4458.1000.1.1.61DisplayStringread-onlymandatory
winlink1000OduService
OBJECT-IDENTITY
1.3.6.1.4.1.4458.1000.1.2
winlink1000OduSrvMode
OBJECT-TYPE
System mode. The only values that can be set are installMode and slaveMode; normalMode reserved to the Manager application provided with the product. A change is effective after link re-synchronization.
1.3.6.1.4.1.4458.1000.1.2.1INTEGER {installMode(1), normalMode(2), slaveMode(3), tempInstallMode(4), inactiveMode(5)}read-writemandatory
winlink1000OduSrvBridging
OBJECT-TYPE
Bridging Mode. Valid values are: disabled (0), enabled (1).
1.3.6.1.4.1.4458.1000.1.2.3INTEGERread-onlymandatory
winlink1000OduServiceRingTopology
OBJECT-IDENTITY
1.3.6.1.4.1.4458.1000.1.2.4
winlink1000OduSrvRingLinkMode
OBJECT-TYPE
Mode of the link regarding ring topology.
1.3.6.1.4.1.4458.1000.1.2.4.1INTEGER {independentLink(1), nonRpl(2), rpl(3)}read-writemandatory
winlink1000OduSrvRingTopologySupported
OBJECT-TYPE
Ring Topology, options are: supported, not supported
1.3.6.1.4.1.4458.1000.1.2.4.2INTEGER {notSupported(1), supported(2)}read-onlymandatory
winlink1000OduSrvRingVlanIdTable
OBJECT-TYPE
Ring VLAN IDs table.
1.3.6.1.4.1.4458.1000.1.2.4.3not-accessiblemandatory
winlink1000OduSrvRingVlanIdEntry
OBJECT-TYPE
VLAN ID of the internal ring messages. Valid values are 1 to 4094. Initial value is 0 meaning VLAN unaware.
1.3.6.1.4.1.4458.1000.1.2.4.3.1not-accessiblemandatory
winlink1000OduSrvRingVlanIdIndex
OBJECT-TYPE
Index of VLAN ID of the internal ring messages.
1.3.6.1.4.1.4458.1000.1.2.4.3.1.1INTEGER (0..3)read-onlymandatory
winlink1000OduSrvRingVlanId
OBJECT-TYPE
VLAN ID of the internal ring messages. Valid values are 1 to 4094. Initial value is 0 meaning VLAN unaware.
1.3.6.1.4.1.4458.1000.1.2.4.3.1.2INTEGER (0..4094)read-writemandatory
winlink1000OduSrvRingEthStatus
OBJECT-TYPE
Represents the Ethernet service blocking state of a Rings link
1.3.6.1.4.1.4458.1000.1.2.4.4INTEGER {unblocked(1), blocked(2), notApplicable(3)}read-onlymandatory
winlink1000OduSrvRingMaxAllowedTimeFromLastRpm
OBJECT-TYPE
Defines the minimal time (in ms) required for determination of ring failure.
1.3.6.1.4.1.4458.1000.1.2.4.5INTEGERread-writemandatory
winlink1000OduSrvRingWTR
OBJECT-TYPE
Defines the minimal time (in ms) required for ring recovery.
1.3.6.1.4.1.4458.1000.1.2.4.6INTEGERread-writemandatory
winlink1000OduServiceQoS
OBJECT-IDENTITY
1.3.6.1.4.1.4458.1000.1.2.5
winlink1000OduSrvQoSMode
OBJECT-TYPE
Mode of QoS feature.
1.3.6.1.4.1.4458.1000.1.2.5.1INTEGER {notSupported(1), notActive(2), classVlan(3), classDiffserv(4)}read-writemandatory
winlink1000OduSrvQoSConfTable
OBJECT-TYPE
QoS configuration table.
1.3.6.1.4.1.4458.1000.1.2.5.2not-accessiblemandatory
winlink1000OduSrvQoSConfEntry
OBJECT-TYPE
QoS configuration table.
1.3.6.1.4.1.4458.1000.1.2.5.2.1not-accessiblemandatory
winlink1000OduSrvQoSConfIndex
OBJECT-TYPE
Index of QoS Configuration.
1.3.6.1.4.1.4458.1000.1.2.5.2.1.1INTEGER (0..3)read-onlymandatory
winlink1000OduSrvConfVlanQGroups
OBJECT-TYPE
Frames classification according to VLAN Priority IDs.
1.3.6.1.4.1.4458.1000.1.2.5.2.1.2INTEGER (0..7)read-onlymandatory
winlink1000OduSrvConfDiffservQGroups
OBJECT-TYPE
Frames classification according to Diffserv.
1.3.6.1.4.1.4458.1000.1.2.5.2.1.3INTEGER (0..48)read-onlymandatory
winlink1000OduSrvConfQueMir
OBJECT-TYPE
Desired Private MIR.
1.3.6.1.4.1.4458.1000.1.2.5.2.1.4INTEGERread-writemandatory
winlink1000OduSrvConfQueWeight
OBJECT-TYPE
QoS queueu's weights in percent.
1.3.6.1.4.1.4458.1000.1.2.5.2.1.5INTEGER (0..100)read-writemandatory
winlink1000OduSrvQoSVlanQGroupsSetStr
OBJECT-TYPE
Frames classification according to VLAN IDs string for set.
1.3.6.1.4.1.4458.1000.1.2.5.3DisplayStringread-writemandatory
winlink1000OduSrvQoSDiffservQGroupsSetStr
OBJECT-TYPE
Frames classification according to Diffserv IDs string for set.
1.3.6.1.4.1.4458.1000.1.2.5.4DisplayStringread-writemandatory
winlink1000OduSrvQoSMaxRTQuePercent
OBJECT-TYPE
Maximal percent for RT & NRT queues.
1.3.6.1.4.1.4458.1000.1.2.5.5INTEGER (0..100)read-onlymandatory
winlink1000OduServiceVlan
OBJECT-IDENTITY
1.3.6.1.4.1.4458.1000.1.2.6
winlink1000OduSrvVlanSupport
OBJECT-TYPE
ODU Ethernet port VLAN support and configuration availability indication. 1 - ODU VLAN Functionality Not Supported 2 - ODU VLAN Functionality Supported 3 - ODU VLAN Functionality Supported and Available
1.3.6.1.4.1.4458.1000.1.2.6.1INTEGER {notSupported(1), supported(2), available(3)}read-onlymandatory
winlink1000OduSrvVlanIngressMode
OBJECT-TYPE
ODU Ethernet port ingress VLAN mode.
1.3.6.1.4.1.4458.1000.1.2.6.2INTEGER {transparent(1), untagAll(2), filter(3)}read-writemandatory
winlink1000OduSrvVlanEgressMode
OBJECT-TYPE
ODU Ethernet port egress VLAN mode.
1.3.6.1.4.1.4458.1000.1.2.6.3INTEGER {transparent(1), tag(2), provider(3)}read-writemandatory
winlink1000OduSrvEgressTag
OBJECT-TYPE
ODU ethernet port egress VLAN tag. Right most digit is Vlan priority (0-7), other digits compose Vlan Id (2-4094)
1.3.6.1.4.1.4458.1000.1.2.6.4INTEGER (0..40947)read-writemandatory
winlink1000OduSrvEgressProviderTag
OBJECT-TYPE
ODU ethernet port egress Provider VLAN tag. Right most digit is Vlan priority (0-7), other digits compose Vlan Id (2-4094)
1.3.6.1.4.1.4458.1000.1.2.6.5INTEGER (0..40947)read-writemandatory
winlink1000OduSrvVlanIngressAllowedVIDs
OBJECT-TYPE
ODU ethernet port VLAN IDs that will not be filtered on ingress. w|w|w|w|w|w|w|w| ( where w = {0-4094} and w != 1 )
1.3.6.1.4.1.4458.1000.1.2.6.6DisplayStringread-writemandatory
winlink1000OduSrvVlanDisable
OBJECT-TYPE
Disable VLAN functionality. The following values can be set: 3 - Disable ODU & IDU VLAN Configurations.
1.3.6.1.4.1.4458.1000.1.2.6.7INTEGERread-writemandatory
winlink1000OduServiceVlanProviderListTPIDstr
OBJECT-TYPE
Holds the possible Provider TPIDs.
1.3.6.1.4.1.4458.1000.1.2.6.8DisplayStringread-onlymandatory
winlink1000OduEthernet
OBJECT-IDENTITY
1.3.6.1.4.1.4458.1000.1.3
winlink1000OduEthernetRemainingRate
OBJECT-TYPE
Current Ethernet bandwidth in bps.
1.3.6.1.4.1.4458.1000.1.3.1INTEGERread-onlymandatory
winlink1000OduEthernetIfTable
OBJECT-TYPE
ODU Ethernet Interface table.
1.3.6.1.4.1.4458.1000.1.3.2not-accessiblemandatory
winlink1000OduEthernetIfEntry
OBJECT-TYPE
ODU Ethernet Interface table entry.
1.3.6.1.4.1.4458.1000.1.3.2.1not-accessiblemandatory
winlink1000OduEthernetIfIndex
OBJECT-TYPE
ODU Ethernet Interface Index.
1.3.6.1.4.1.4458.1000.1.3.2.1.1INTEGERread-onlymandatory
winlink1000OduEthernetIfAddress
OBJECT-TYPE
ODU MAC address.
1.3.6.1.4.1.4458.1000.1.3.2.1.5DisplayStringread-onlymandatory
winlink1000OduEthernetIfAdminStatus
OBJECT-TYPE
Required state of the interface.
1.3.6.1.4.1.4458.1000.1.3.2.1.6INTEGER {portAutoSense(1), portAutoSense100Mbps(5), forceHalfDuplex10Mbps(10), forceFullDuplex10Mbps(11), forceHalfDuplex100Mbps(15), forceFullDuplex100Mbps(16), forceFullDuplex1000Mbps(21), disablePoePort(254), disablePort(255)}read-writemandatory
winlink1000OduEthernetIfOperStatus
OBJECT-TYPE
Current operational state of the interface.
1.3.6.1.4.1.4458.1000.1.3.2.1.7INTEGER {notConnected(1), connectedHalfDuplex10Mbps(10), connectedFullDuplex10Mbps(11), connectedHalfDuplex100Mbps(15), connectedFullDuplex100Mbps(16), connectedHalfDuplex1000Mbps(20), connectedFullDuplex1000Mbps(21), unknown(65535)}read-onlymandatory
winlink1000OduEthernetIfFailAction
OBJECT-TYPE
Failure action of the interface.
1.3.6.1.4.1.4458.1000.1.3.2.1.8INTEGER {faNoAction(1), faForceHalfDuplex10Mbps(10), faForceFullDuplex10Mbps(11), faDisablePort(255)}read-writemandatory
winlink1000OduEthernetIf1588v2PTPEventRXRate
OBJECT-TYPE
For debug use
1.3.6.1.4.1.4458.1000.1.3.2.1.9INTEGERread-onlymandatory
winlink1000OduEthernetIf1588v2PTPEventTXRate
OBJECT-TYPE
For debug use
1.3.6.1.4.1.4458.1000.1.3.2.1.10INTEGERread-onlymandatory
winlink1000OduEthernetNumOfPorts
OBJECT-TYPE
Number of ODU network interfaces.
1.3.6.1.4.1.4458.1000.1.3.3INTEGERread-onlymandatory
winlink1000OduEthernetGbeSupported
OBJECT-TYPE
Supported Giga bit Ethernet in ODU.
1.3.6.1.4.1.4458.1000.1.3.4INTEGER {notSupported(1), supported(2)}read-onlymandatory
winlink1000OduEthernetSfpProperties
OBJECT-TYPE
Sfp port properties.
1.3.6.1.4.1.4458.1000.1.3.5DisplayStringread-onlymandatory
winlink1000OduBridge
OBJECT-IDENTITY
1.3.6.1.4.1.4458.1000.1.4
winlink1000OduBridgeBase
OBJECT-IDENTITY
1.3.6.1.4.1.4458.1000.1.4.1
winlink1000OduBridgeBasePortTable
OBJECT-TYPE
ODU Bridge Ports table.
1.3.6.1.4.1.4458.1000.1.4.1.4not-accessiblemandatory
winlink1000OduBridgeBasePortEntry
OBJECT-TYPE
ODU Bridge Ports table entry.
1.3.6.1.4.1.4458.1000.1.4.1.4.1not-accessiblemandatory
winlink1000OduBridgeBasePortIndex
OBJECT-TYPE
ODU Bridge Port Number.
1.3.6.1.4.1.4458.1000.1.4.1.4.1.1INTEGERread-onlymandatory
winlink1000OduBridgeBaseIfIndex
OBJECT-TYPE
IfIndex corresponding to ODU Bridge port.
1.3.6.1.4.1.4458.1000.1.4.1.4.1.2INTEGERread-onlymandatory
winlink1000OduBridgeTp
OBJECT-IDENTITY
1.3.6.1.4.1.4458.1000.1.4.4
winlink1000OduBridgeTpPortTable
OBJECT-TYPE
ODU Transparent Bridge Ports table.
1.3.6.1.4.1.4458.1000.1.4.4.3not-accessiblemandatory
winlink1000OduBridgeTpPortEntry
OBJECT-TYPE
ODU Transparent Bridge Ports table entry.
1.3.6.1.4.1.4458.1000.1.4.4.3.1not-accessiblemandatory
winlink1000OduBridgeTpPortIndex
OBJECT-TYPE
ODU Transparent Bridge Port Number.
1.3.6.1.4.1.4458.1000.1.4.4.3.1.1INTEGERread-onlymandatory
winlink1000OduBridgeTpPortInFrames
OBJECT-TYPE
Number of frames received by this port.
1.3.6.1.4.1.4458.1000.1.4.4.3.1.3Counterread-onlymandatory
winlink1000OduBridgeTpPortOutFrames
OBJECT-TYPE
Number of frames transmitted by this port.
1.3.6.1.4.1.4458.1000.1.4.4.3.1.4Counterread-onlymandatory
winlink1000OduBridgeTpPortInBytes
OBJECT-TYPE
Number of bytes received by this port.
1.3.6.1.4.1.4458.1000.1.4.4.3.1.101Counterread-onlymandatory
winlink1000OduBridgeTpPortOutBytes
OBJECT-TYPE
Number of bytes transmitted by this port.
1.3.6.1.4.1.4458.1000.1.4.4.3.1.102Counterread-onlymandatory
winlink1000OduBridgeTpMode
OBJECT-TYPE
ODU bridge mode. A change is effective after reset. Valid values: hubMode (0), bridgeMode (1).
1.3.6.1.4.1.4458.1000.1.4.4.101INTEGERread-writemandatory
winlink1000OduBridgeConfigMode
OBJECT-TYPE
ODU bridge configuration mode
1.3.6.1.4.1.4458.1000.1.4.4.102INTEGER {enable(1), disable(2)}read-onlymandatory
winlink1000OduAir
OBJECT-IDENTITY
1.3.6.1.4.1.4458.1000.1.5
winlink1000OduAirFreq
OBJECT-TYPE
Installation Center Frequency. Valid values are product dependent. A change is effective after link re-synchronization.
1.3.6.1.4.1.4458.1000.1.5.1INTEGERread-writemandatory
winlink1000OduAirDesiredRate
OBJECT-TYPE
Deprecated parameter, actual behavior is read-only. Required Air Rate. For Channel Bandwidth of 20, 10, 5 MHz divide the value by 1, 2, 4 respectively.
1.3.6.1.4.1.4458.1000.1.5.2INTEGERread-writedeprecated
winlink1000OduAirSSID
OBJECT-TYPE
Reserved for the Manager application provided with the product. The Sector ID in Point-To-Multi-Point systems.
1.3.6.1.4.1.4458.1000.1.5.3DisplayStringread-writemandatory
winlink1000OduAirTxPower
OBJECT-TYPE
Required Transmit power in dBm . This is a nominal value while the actual transmit power includes additional attenuation. The min and max values are product specific. A change is effective immediately.
1.3.6.1.4.1.4458.1000.1.5.4INTEGERread-writemandatory
winlink1000OduAirSesState
OBJECT-TYPE
Current Link State. The value is active (3) during normal operation.
1.3.6.1.4.1.4458.1000.1.5.5INTEGER {sessionDown(1), basicRate(2), active(3), installation(4), scanning(5), probing(6), transmitting(7), activeWithDefaultEncryptionKey(8), installationWithDefaultEncryptionKey(9), bitFailed(10), activeWithVersionsMismatch(11), installationWithVersionsMismatch(12), inactive(13), iduIncompatible(14), spectrumAnalysis(15)}read-onlymandatory
winlink1000OduAirMstrSlv
OBJECT-TYPE
This parameter indicates if the device was automatically selected into the radio link master or slave. The value is undefined if there is no link. The value is relevant only for point to point systems.
1.3.6.1.4.1.4458.1000.1.5.6INTEGERread-onlymandatory
winlink1000OduAirResync
OBJECT-TYPE
Setting this parameter to 1 will cause the link to restart the synchronization process.
1.3.6.1.4.1.4458.1000.1.5.8INTEGERread-writemandatory
winlink1000OduAirPerf
OBJECT-IDENTITY
1.3.6.1.4.1.4458.1000.1.5.9
winlink1000OduAirRxPower
OBJECT-TYPE
Received Signal Strength in dBm. Relevant only for point to point systems.
1.3.6.1.4.1.4458.1000.1.5.9.1INTEGERread-onlymandatory
winlink1000OduAirTotalFrames
OBJECT-TYPE
Total number of radio frames.
1.3.6.1.4.1.4458.1000.1.5.9.2Counterread-onlymandatory
winlink1000OduAirBadFrames
OBJECT-TYPE
Total number of received radio frames with CRC error. The value is relevant only for point to point systems .
1.3.6.1.4.1.4458.1000.1.5.9.3Counterread-onlymandatory
winlink1000OduAirCurrentRate
OBJECT-TYPE
Deprecated parameter. Actual rate of the air interface in Mbps. For Channel Bandwidth of 20, 10, 5 MHz divide the value by 1, 2, 4 respectively.
1.3.6.1.4.1.4458.1000.1.5.9.4INTEGERread-onlydeprecated
winlink1000OduAirCurrentRateIdx
OBJECT-TYPE
Index of current air rate.
1.3.6.1.4.1.4458.1000.1.5.9.5INTEGERread-onlymandatory
winlink1000OduAirChainsRxPower
OBJECT-TYPE
Received Signal Strength of Cpe chains in dBm. Chain 1 RSS: (1 Byte) Chain 2 RSS: (1 Byte) Chain 3 RSS: (1 Byte)
1.3.6.1.4.1.4458.1000.1.5.9.6OCTET STRINGread-onlymandatory
winlink1000OduAirCurrentRateCBW
OBJECT-TYPE
CBW of current air rate.
1.3.6.1.4.1.4458.1000.1.5.9.7INTEGERread-onlymandatory
winlink1000OduAirCurrentRateGI
OBJECT-TYPE
GI of current air rate.
1.3.6.1.4.1.4458.1000.1.5.9.8INTEGERread-onlymandatory
winlink1000OduAirTxPower36
OBJECT-TYPE
Deprecated parameter. Actual behavior is read-only.
1.3.6.1.4.1.4458.1000.1.5.10INTEGERread-writedeprecated
winlink1000OduAirTxPower48
OBJECT-TYPE
Deprecated parameter. Actual behavior is read-only.
1.3.6.1.4.1.4458.1000.1.5.11INTEGERread-writedeprecated
winlink1000OduAirCurrentTxPower
OBJECT-TYPE
Current Transmit Power in dBm. This is a nominal value while the actual transmit power includes additional attenuation.
1.3.6.1.4.1.4458.1000.1.5.12INTEGERread-onlymandatory
winlink1000OduAirMinFrequency
OBJECT-TYPE
Minimum center frequency in MHz.
1.3.6.1.4.1.4458.1000.1.5.13INTEGERread-onlymandatory
winlink1000OduAirMaxFrequency
OBJECT-TYPE
Maximum center frequency in MHz.
1.3.6.1.4.1.4458.1000.1.5.14INTEGERread-onlymandatory
winlink1000OduAirFreqResolution
OBJECT-TYPE
Center Frequency resolution. Measured in MHz if value < 100, otherwise in KHz.
1.3.6.1.4.1.4458.1000.1.5.15INTEGERread-onlymandatory
winlink1000OduAirCurrentFreq
OBJECT-TYPE
Current Center Frequency. Measured in MHz if center frequency resolution value < 100, otherwise in KHz.
1.3.6.1.4.1.4458.1000.1.5.16INTEGERread-onlymandatory
winlink1000OduAirNumberOfChannels
OBJECT-TYPE
Number of channels that can be used.
1.3.6.1.4.1.4458.1000.1.5.17INTEGERread-onlymandatory
winlink1000OduAirChannelsTable
OBJECT-TYPE
Table of channels used by automatic channels selection (ACS).
1.3.6.1.4.1.4458.1000.1.5.18not-accessiblemandatory
winlink1000OduAirChannelsEntry
OBJECT-TYPE
ACS channels table entry.
1.3.6.1.4.1.4458.1000.1.5.18.1not-accessiblemandatory
winlink1000OduAirChannelsIndex
OBJECT-TYPE
Channel Index.
1.3.6.1.4.1.4458.1000.1.5.18.1.1INTEGERread-onlymandatory
winlink1000OduAirChannelsFrequency
OBJECT-TYPE
Channel frequency in MHz.
1.3.6.1.4.1.4458.1000.1.5.18.1.2INTEGERread-onlymandatory
winlink1000OduAirChannelsOperState
OBJECT-TYPE
Channel state. Can be set by the user. Automatic Channel Selection uses channels that are AirChannelsOperState enabled and AirChannelsAvail enabled. A change is effective after link re-synchronization. Valid values: disabled (0), enabled (1). Rewriteable only in Point-To-Point products.
1.3.6.1.4.1.4458.1000.1.5.18.1.3INTEGERread-writemandatory
winlink1000OduAirChannelsAvail
OBJECT-TYPE
Channel state. Product specific and cannot be changed by the user. Automatic Channel Selection uses channels that are AirChannelsOperState enabled and AirChannelsAvail enabled. Valid values: disabled (0), enabled (1).
1.3.6.1.4.1.4458.1000.1.5.18.1.4INTEGERread-onlymandatory
winlink1000OduAirChannelsDefaultFreq
OBJECT-TYPE
Default channel's availability for all CBWs. The valid values are: forbidden (0), available (1).
1.3.6.1.4.1.4458.1000.1.5.18.1.5INTEGERread-onlymandatory
winlink1000OduAirDfsState
OBJECT-TYPE
Radar detection state. Valid values: disabled (0), enabled (1).
1.3.6.1.4.1.4458.1000.1.5.19INTEGERread-onlymandatory
winlink1000OduAirAutoChannelSelectionState
OBJECT-TYPE
Deprecated parameter. Indicating Automatic Channel Selection availability at current channel bandwidth. Valid values: disabled (0), enabled (1).
1.3.6.1.4.1.4458.1000.1.5.20INTEGERread-onlydeprecated
winlink1000OduAirEnableTxPower
OBJECT-TYPE
Indicating Transmit power configuration enabled or disabled.
1.3.6.1.4.1.4458.1000.1.5.21INTEGER {enabled(1), disabled(2)}read-onlymandatory
winlink1000OduAirMinTxPower
OBJECT-TYPE
Minimum Transmit power in dBm.
1.3.6.1.4.1.4458.1000.1.5.22INTEGERread-onlymandatory
winlink1000OduAirMaxTxPowerTable
OBJECT-TYPE
Table of Maximum transmit power per air rate, in dBm.
1.3.6.1.4.1.4458.1000.1.5.23not-accessiblemandatory
winlink1000OduAirMaxTxPowerEntry
OBJECT-TYPE
Maximum Transmit power table entry.
1.3.6.1.4.1.4458.1000.1.5.23.1not-accessiblemandatory
winlink1000OduAirMaxTxPowerIndex
OBJECT-TYPE
Air interface rate index.
1.3.6.1.4.1.4458.1000.1.5.23.1.1INTEGERread-onlymandatory
winlink1000OduAirMaxTxPower
OBJECT-TYPE
Maximum Transmit power in dBm.
1.3.6.1.4.1.4458.1000.1.5.23.1.2INTEGERread-onlymandatory
winlink1000OduAirChannelBandwidth
OBJECT-TYPE
Channel bandwidth in KHz. A change is effective after reset.
1.3.6.1.4.1.4458.1000.1.5.24INTEGERread-writemandatory
winlink1000OduAirChannelBWTable
OBJECT-TYPE
Channel Bandwidths table.
1.3.6.1.4.1.4458.1000.1.5.25not-accessiblemandatory
winlink1000OduAirChannelBWEntry
OBJECT-TYPE
Channel Bandwidth table entry.
1.3.6.1.4.1.4458.1000.1.5.25.1not-accessiblemandatory
winlink1000OduAirChannelBWIndex
OBJECT-TYPE
Channel Bandwidth index.
1.3.6.1.4.1.4458.1000.1.5.25.1.1INTEGER {channelBW5MHz(1), channelBW10MHz(2), channelBW20MHz(3), channelBW40MHz(4), channelBW80MHz(5), channelBW7MHz(6), channelBW14MHz(7)}read-onlymandatory
winlink1000OduAirChannelBWAvail
OBJECT-TYPE
Channel Bandwidth availability, product specific. Options are: Not supported, supported with manual channel selection, supported with Automatic Channel Selection.
1.3.6.1.4.1.4458.1000.1.5.25.1.2INTEGER {notSupported(1), supportedManual(2), supportedWithACS(3)}read-onlymandatory
winlink1000OduAirChannelsAdminState
OBJECT-TYPE
Channels' availability per CBW.
1.3.6.1.4.1.4458.1000.1.5.25.1.3DisplayStringread-onlymandatory
winlink1000OduAirChannelBWHSSATDDConflictPerCBW
OBJECT-TYPE
Indication for possible Link drop per CBW due to conflict between HSS and ATDD.
1.3.6.1.4.1.4458.1000.1.5.25.1.4INTEGER {noConflict(1), conflictSingle(2), conflictDual(3)}read-onlymandatory
winlink1000OduAirChannelBWMinRatioForSupporting
OBJECT-TYPE
Minimal TX ratio that may be used by the HSM and still enable proper operation of the aforementioned CBW.
1.3.6.1.4.1.4458.1000.1.5.25.1.5INTEGERread-onlymandatory
winlink1000OduAirChannelBWMaxRatioForSupporting
OBJECT-TYPE
Maximal TX ratio that may be used by the HSM and still enable proper operation of the aforementioned CBW.
1.3.6.1.4.1.4458.1000.1.5.25.1.6INTEGERread-onlymandatory
winlink1000OduAirRFD
OBJECT-TYPE
Current radio frame duration in microseconds.
1.3.6.1.4.1.4458.1000.1.5.26INTEGERread-onlymandatory
winlink1000OduAirRatesTable
OBJECT-TYPE
Air Rate indexes table for current channel bandwidth.
1.3.6.1.4.1.4458.1000.1.5.27not-accessiblemandatory
winlink1000OduAirRatesEntry
OBJECT-TYPE
Air Rate indexes table entry.
1.3.6.1.4.1.4458.1000.1.5.27.1not-accessiblemandatory
winlink1000OduAirRatesIndex
OBJECT-TYPE
Air Rate index.
1.3.6.1.4.1.4458.1000.1.5.27.1.1INTEGERread-onlymandatory
winlink1000OduAirRatesAvail
OBJECT-TYPE
Air Rate availability, depending on air interface conditions.
1.3.6.1.4.1.4458.1000.1.5.27.1.2INTEGER {rateNotAvailable(1), rateAvailable(2)}read-onlymandatory
winlink1000OduAirDesiredRateIdx
OBJECT-TYPE
Required Air Rate index. 0 reserved for Adaptive Rate. A change is effective immediately after Set operation to the master side while the link is up.
1.3.6.1.4.1.4458.1000.1.5.28INTEGERread-writemandatory
winlink1000OduAirLinkDistance
OBJECT-TYPE
Link distance in meters. A value of -1 indicates an illegal value and is also used when a link is not established.
1.3.6.1.4.1.4458.1000.1.5.29INTEGERread-onlymandatory
winlink1000OduAirLinkWorkingMode
OBJECT-TYPE
Link working mode as a result of comparing versions of both sides of the link. Possible modes are: Unknown - no link, Normal - versions on both sides are identical with full compatibility, with restricted compatibility, or versions on both sides are different with software upgrade or versions incompatibility.
1.3.6.1.4.1.4458.1000.1.5.30INTEGER {unknown(1), normal(2), fullCompatibilityRemoteUpgradeAvailable(3), fullCompatibilityLocalUpgradeAvailable(4), restrictedCompatibilityRemoteUpgradeRecomended(5), restrictedCompatibilityLocalUpgradeRecomended(6), softwareUpgradeRemoteUpgradeRequired(7), softwareUpgradeLocalUpgradeRequired(8), versionsIncompatibilityRemoteUpgradeRequired(9), versionsIncompatibilityLocalUpgradeRequired(10)}read-onlymandatory
winlink1000OduAirMajorLinkIfVersion
OBJECT-TYPE
Major link interface version
1.3.6.1.4.1.4458.1000.1.5.31INTEGERread-onlymandatory
winlink1000OduAirMinorLinkIfVersion
OBJECT-TYPE
Minor link interface version
1.3.6.1.4.1.4458.1000.1.5.32INTEGERread-onlymandatory
winlink1000OduAirHss
OBJECT-IDENTITY
1.3.6.1.4.1.4458.1000.1.5.40
winlink1000OduAirHssDesiredOpState
OBJECT-TYPE
Required Hub Site Synchronization operating state. For HssSyncUnits : For hssISU :[2,7] ,For hssGSU :[2,6] For HBS: [2,3,4,5]
1.3.6.1.4.1.4458.1000.1.5.40.1INTEGER {notSupported(1), independentUnit(2), hubSyncMaster(3), hubSyncClientContinueTx(4), hubSyncClientDisableTx(5), gpsSync(6), independentSyncUnit-ISU(7)}read-writemandatory
winlink1000OduAirHssCurrentOpState
OBJECT-TYPE
Current Hub Site Synchronization operating state.
1.3.6.1.4.1.4458.1000.1.5.40.2INTEGER {notSupported(1), independentUnit(2), hubSyncMaster(3), hubSyncClientContinueTx(4), hubSyncClientDisableTx(5), gpsSync(6), independentSyncUnit-ISU(7)}read-onlymandatory
winlink1000OduAirHssSyncStatus
OBJECT-TYPE
Hub Site Synchronization sync status.
1.3.6.1.4.1.4458.1000.1.5.40.3INTEGER {notApplicable(1), notSynchronized(2), synchronized(3)}read-onlymandatory
winlink1000OduAirHssExtPulseStatus
OBJECT-TYPE
Hub Site Synchronization external pulse detection status. In GSS mode: if generating then 1PSP is auto generated by the GSS Unit. if generatingAndDetecting then 1PSP is generated by GPS satellites signal.
1.3.6.1.4.1.4458.1000.1.5.40.4INTEGER {notDetected(1), generating(2), generatingAndDetected(3), generatingAndImproperDetected(4), detected(5), improperDetected(6), multipleSourcesDetected(7)}read-onlymandatory
winlink1000OduAirHssExtPulseType
OBJECT-TYPE
Hub Site Synchronization external pulse type.
1.3.6.1.4.1.4458.1000.1.5.40.5INTEGER {notApplicable(1), typeA(2), typeB(3), typeC(4), typeD(5), typeE(6), typeF(7)}read-onlymandatory
winlink1000OduAirHssDesiredExtPulseType
OBJECT-TYPE
Hub Site Synchronization required external pulse type. Valid values for read write: {typeA(2),typeB(3),typeC(4),typeD(5),typeE(6),typeF(7)}. Valid value for read only: {notApplicable(1)}.
1.3.6.1.4.1.4458.1000.1.5.40.6INTEGER {notApplicable(1), typeA(2), typeB(3), typeC(4), typeD(5), typeE(6), typeF(7)}read-writemandatory
winlink1000OduAirHssRfpTable
OBJECT-TYPE
ODU Radio Frame Patterns (RFP) Table.
1.3.6.1.4.1.4458.1000.1.5.40.7not-accessiblemandatory
winlink1000OduAirHssRfpEntry
OBJECT-TYPE
ODU RFP Table entry.
1.3.6.1.4.1.4458.1000.1.5.40.7.1not-accessiblemandatory
winlink1000OduAirHssRfpIndex
OBJECT-TYPE
ODU RFP Table index. The index represent the Radio Frame Pattern: typeA(2), typeB(3), typeC(4), typeD(5),typeE(6),typeF(7).
1.3.6.1.4.1.4458.1000.1.5.40.7.1.1INTEGER (2..7)read-onlymandatory
winlink1000OduAirHssRfpEthChannelBW5MHz
OBJECT-TYPE
Represents the compatibility of Ethernet service under Channel BW of 5MHz in the specific Radio Frame Pattern.
1.3.6.1.4.1.4458.1000.1.5.40.7.1.2INTEGER {bestFit(1), nonOptimal(2), notAvailable(3)}read-onlymandatory
winlink1000OduAirHssRfpTdmChannelBW5MHz
OBJECT-TYPE
Represents the compatibility of TDM service under Channel BW of 5MHz in the specific Radio Frame Pattern.
1.3.6.1.4.1.4458.1000.1.5.40.7.1.3INTEGER {bestFit(1), nonOptimal(2), notAvailable(3)}read-onlymandatory
winlink1000OduAirHssRfpEthChannelBW10MHz
OBJECT-TYPE
Represents the compatibility of Ethernet service under Channel BW of 10MHz in the specific Radio Frame Pattern.
1.3.6.1.4.1.4458.1000.1.5.40.7.1.4INTEGER {bestFit(1), nonOptimal(2), notAvailable(3)}read-onlymandatory
winlink1000OduAirHssRfpTdmChannelBW10MHz
OBJECT-TYPE
Represents the compatibility of TDM service under Channel BW of 10MHz in the specific Radio Frame Pattern.
1.3.6.1.4.1.4458.1000.1.5.40.7.1.5INTEGER {bestFit(1), nonOptimal(2), notAvailable(3)}read-onlymandatory
winlink1000OduAirHssRfpEthChannelBW20MHz
OBJECT-TYPE
Represents the compatibility of Ethernet service under Channel BW of 20MHz in the specific Radio Frame Pattern.
1.3.6.1.4.1.4458.1000.1.5.40.7.1.6INTEGER {bestFit(1), nonOptimal(2), notAvailable(3)}read-onlymandatory
winlink1000OduAirHssRfpTdmChannelBW20MHz
OBJECT-TYPE
Represents the compatibility of TDM service under Channel BW of 20MHz in the specific Radio Frame Pattern.
1.3.6.1.4.1.4458.1000.1.5.40.7.1.7INTEGER {bestFit(1), nonOptimal(2), notAvailable(3)}read-onlymandatory
winlink1000OduAirHssRfpEthChannelBW40MHz
OBJECT-TYPE
Represents the compatibility of Ethernet service under Channel BW of 40MHz in the specific Radio Frame Pattern.
1.3.6.1.4.1.4458.1000.1.5.40.7.1.8INTEGER {bestFit(1), nonOptimal(2), notAvailable(3)}read-onlymandatory
winlink1000OduAirHssRfpTdmChannelBW40MHz
OBJECT-TYPE
Represents the compatibility of TDM service under Channel BW of 40MHz in the specific Radio Frame Pattern.
1.3.6.1.4.1.4458.1000.1.5.40.7.1.9INTEGER {bestFit(1), nonOptimal(2), notAvailable(3)}read-onlymandatory
winlink1000OduAirHssRfpEthChannelBW80MHz
OBJECT-TYPE
Represents the compatibility of Ethernet service under Channel BW of 80MHz in the specific Radio Frame Pattern.
1.3.6.1.4.1.4458.1000.1.5.40.7.1.10INTEGER {bestFit(1), nonOptimal(2), notAvailable(3)}read-onlymandatory
winlink1000OduAirHssRfpEthChannelBW7MHz
OBJECT-TYPE
Represents the compatibility of Ethernet service under Channel BW of 7MHz in the specific Radio Frame Pattern.
1.3.6.1.4.1.4458.1000.1.5.40.7.1.11INTEGER {bestFit(1), nonOptimal(2), notAvailable(3)}read-onlymandatory
winlink1000OduAirHssRfpEthChannelBW14MHz
OBJECT-TYPE
Represents the compatibility of Ethernet service under Channel BW of 14MHz in the specific Radio Frame Pattern.
1.3.6.1.4.1.4458.1000.1.5.40.7.1.12INTEGER {bestFit(1), nonOptimal(2), notAvailable(3)}read-onlymandatory
winlink1000OduAirHssRfpStr
OBJECT-TYPE
Hub Site Synchronization supported patterns
1.3.6.1.4.1.4458.1000.1.5.40.8DisplayStringread-onlymandatory
winlink1000OduAirHssHsmID
OBJECT-TYPE
A unique ID which is common to the HSM and all its collocated ODUs
1.3.6.1.4.1.4458.1000.1.5.40.9INTEGERread-onlymandatory
winlink1000OduAirHssTime
OBJECT-TYPE
Hub Site Synchronization GPS time
1.3.6.1.4.1.4458.1000.1.5.40.10DisplayStringread-onlymandatory
winlink1000OduAirHssLatitude
OBJECT-TYPE
Hub Site Synchronization GPS Latitude
1.3.6.1.4.1.4458.1000.1.5.40.11DisplayStringread-onlymandatory
winlink1000OduAirHssNSIndicator
OBJECT-TYPE
Hub Site Synchronization GPS N/S Indicator
1.3.6.1.4.1.4458.1000.1.5.40.12DisplayStringread-onlymandatory
winlink1000OduAirHssLongitude
OBJECT-TYPE
Hub Site Synchronization GPS Longitude
1.3.6.1.4.1.4458.1000.1.5.40.13DisplayStringread-onlymandatory
winlink1000OduAirHssEWIndicator
OBJECT-TYPE
Hub Site Synchronization GPS E/W Indicator
1.3.6.1.4.1.4458.1000.1.5.40.14DisplayStringread-onlymandatory
winlink1000OduAirHssNumSatellites
OBJECT-TYPE
Hub Site Synchronization GPS Number of satellites
1.3.6.1.4.1.4458.1000.1.5.40.15DisplayStringread-onlymandatory
winlink1000OduAirHssAltitude
OBJECT-TYPE
Hub Site Synchronization GPS Altitude
1.3.6.1.4.1.4458.1000.1.5.40.16DisplayStringread-onlymandatory
winlink1000OduAirHssRfpPhase
OBJECT-TYPE
Hub Site Synchronization GPS RFP phase
1.3.6.1.4.1.4458.1000.1.5.40.17INTEGER {rfpNormalPhase(1), rfpShiftedPhase(2)}read-writemandatory
winlink1000OduAirHssInterSiteSynchronizationMode
OBJECT-TYPE
Inter-Site Synchronization Mode - independent / synchronized
1.3.6.1.4.1.4458.1000.1.5.40.18INTEGER {independent(1), synchronized(2)}read-writemandatory
winlink1000OduAirHssInterSiteSynchronizationAvailability
OBJECT-TYPE
Inter-Site Synchronization Availability
1.3.6.1.4.1.4458.1000.1.5.40.19INTEGER {notAvailable(1), available(2)}read-onlymandatory
winlink1000OduAirHssSatellitesSatSyncRequired
OBJECT-TYPE
Satellites Synchronization Is Required
1.3.6.1.4.1.4458.1000.1.5.40.20INTEGER {notRequired(1), required(2)}read-writemandatory
winlink1000OduAirHssDomainID
OBJECT-TYPE
EHSS domain. Indentify set of CUs with same HSS synchronization
1.3.6.1.4.1.4458.1000.1.5.40.21DisplayStringread-writemandatory
winlink1000OduAirHssSupportedSynchronizationProtocol
OBJECT-TYPE
Supported Synchronization Protocols
1.3.6.1.4.1.4458.1000.1.5.40.22INTEGER {serialOnly(1), ethOnly(2), both(3), ghssAndEth(4), ghssEthSerial(5)}read-onlymandatory
winlink1000OduAirHssDesiredSynchronizationProtocol
OBJECT-TYPE
Desired Synchronization Protocols
1.3.6.1.4.1.4458.1000.1.5.40.23INTEGER {serialOnly(1), ethOnly(2), both(3), ghssOnly(4)}read-writemandatory
winlink1000OduAirHssDiscover
OBJECT-TYPE
Initiate Discovery process of ODUs on the network.
1.3.6.1.4.1.4458.1000.1.5.40.24INTEGER {startAll(1), startAllMstr(2), startMyDmn(3), startMyMstr(4)}read-writemandatory
winlink1000OduAirHssNumberOfDiscoveredODUs
OBJECT-TYPE
Number OF Discovered ODUs in network.
1.3.6.1.4.1.4458.1000.1.5.40.25INTEGER (0..1000)read-onlymandatory
winlink1000OduAirHssDiscoverTable
OBJECT-TYPE
HSS Discover Table.
1.3.6.1.4.1.4458.1000.1.5.40.26not-accessiblemandatory
winlink1000OduAirHssDiscoverEntry
OBJECT-TYPE
ODU Discover Table entry.
1.3.6.1.4.1.4458.1000.1.5.40.26.1not-accessiblemandatory
winlink1000OduAirHssDiscoverIndex
OBJECT-TYPE
HSS Discover Table Index.
1.3.6.1.4.1.4458.1000.1.5.40.26.1.1INTEGER (1..256)read-onlymandatory
winlink1000OduAirHssDiscoverODUDescription
OBJECT-TYPE
Hold ODU HSS status in compress format: Domain,IP,HSS Role,Hss support, Enabled HSS protocol,Sync Status, Location, IPv6.
1.3.6.1.4.1.4458.1000.1.5.40.26.1.2DisplayStringread-onlymandatory
winlink1000OduAirHssMasterSlaveCompatibility
OBJECT-TYPE
EHSM version compatibility. Relevant to Ethernet HSS Clients only.
1.3.6.1.4.1.4458.1000.1.5.40.27INTEGER {compatible(1), notCompatible(2)}read-onlymandatory
winlink1000OduAirHssNumberOfAssociatedCU
OBJECT-TYPE
Number of associated Ethernet HSS Clients. Relevant to Ethernet HSS Masters only
1.3.6.1.4.1.4458.1000.1.5.40.28INTEGER (0..256)read-onlymandatory
winlink1000OduAirHssAssociatedCUTable
OBJECT-TYPE
Associated Ethernet HSS Clients Table. Releant for Ethernet HSS Masters only.
1.3.6.1.4.1.4458.1000.1.5.40.29not-accessiblemandatory
winlink1000OduAirHssAssociatedCUTableEntry
OBJECT-TYPE
Associated Ethernet HSS Clients Table Entry. Releant for Ethernet HSS Masters only.
1.3.6.1.4.1.4458.1000.1.5.40.29.1not-accessiblemandatory
winlink1000OduAirHssAssociatedCUIndex
OBJECT-TYPE
Associated Ethernet HSS Clients Table Index. Releant for Ethernet HSS Masters only.
1.3.6.1.4.1.4458.1000.1.5.40.29.1.1INTEGER (1..256)read-onlymandatory
winlink1000OduAirHssAssociatedCUDescription
OBJECT-TYPE
Holds Associated Ethernet HSS Clients Description in compress format: IP,Delay,Compatibility,Ethernet Speed, Ethernet Rx rate, IPv6
1.3.6.1.4.1.4458.1000.1.5.40.29.1.2DisplayStringread-onlymandatory
winlink1000OduAirHssSyncStatusEth
OBJECT-TYPE
Ethernet HSS Client Synchronization Level
1.3.6.1.4.1.4458.1000.1.5.40.30INTEGER {notApplicable(1), notSynchronized(2), goodSynchronizationLevel(3), mediumSynchronizationLevel(4), badSynchronizationLevel(5), startSynchronization(6)}read-onlymandatory
winlink1000OduAirHssEthVLANTag
OBJECT-TYPE
Ethernet HSS VLan Tag: The least significate decimal digit is the VLan Priority(0-6) and the rest of the digits represents VLan ID (2-4094)
1.3.6.1.4.1.4458.1000.1.5.40.31INTEGER (1..40947)read-writemandatory
winlink1000OduAirHssHSMIPAddress
OBJECT-TYPE
HSMs IP address. Relevant for HSC synchronized over Ethernet.
1.3.6.1.4.1.4458.1000.1.5.40.32IpAddressread-onlymandatory
winlink1000OduAirHssDelayToHSM
OBJECT-TYPE
Delay in microseconds to HSM. Relevant for HSC synchronized over Ethernet.
1.3.6.1.4.1.4458.1000.1.5.40.33INTEGER (0..1000000)read-onlymandatory
winlink1000OduAirHssSyncAcquisitionSeconds
OBJECT-TYPE
Accumulated quantity of seconds in clock acquisition while connected to current HSM
1.3.6.1.4.1.4458.1000.1.5.40.34INTEGERread-writemandatory
winlink1000OduAirHssHSMIPv6Address
OBJECT-TYPE
HSMs IPv6 address. Relevant for HSC synchronized over Ethernet.
1.3.6.1.4.1.4458.1000.1.5.40.35DisplayStringread-onlymandatory
winlink1000OduAirLockRemote
OBJECT-TYPE
This parameter enables locking the link with a specific ODU. The following values can be set: Unlock (default) - The ODU is not locked on a specific remote ODU. Unlock can only be performed when the link is not connected. Lock - The ODU is locked on a specific remote ODU. Lock can only be performed when the link is active.
1.3.6.1.4.1.4458.1000.1.5.41INTEGER {unlock(1), lock(2)}read-writemandatory
winlink1000OduAirAntennaGain
OBJECT-TYPE
Current Antenna Gain in 0.1 dBi resolution. User defined value for external antenna. Legal range: MinAntennaGain - Alarm.
1.3.6.1.4.1.4458.1000.1.5.42INTEGERread-writemandatory

Notifications

NameOIDStatus
externalAlarmInPort1Alarm
NOTIFICATION-TYPE
The trap is sent every time an alarm occurs in the External Alarm Input of port #1. Contains a single parameter, which is its description: 1 - Description: External Alarm 1 - - Alarm.
1.3.6.1.4.1.4458.1000.0.105
externalAlarmInPort2Alarm
NOTIFICATION-TYPE
The trap is sent every time an alarm occurs in the External Alarm Input of port #2. Contains a single parameter, which is its description: 1 - Description: External Alarm 2 - - Alarm.
1.3.6.1.4.1.4458.1000.0.106
bitFailedAlarm
NOTIFICATION-TYPE
The trap is sent if there is no way to recover from the situation. Contains two parameters: 1 - Description: ODU power up built in test failed. Error code is: %n 2 - %n number
1.3.6.1.4.1.4458.1000.0.107
wrongConfigurationLoadedAlarm
NOTIFICATION-TYPE
The trap is sent if there is a way to recover from the situation. Contains two parameters: 1 - Description: Wrong configuration loaded. Error code is: %n 2 - %n number
1.3.6.1.4.1.4458.1000.0.108
lanPort1DisconnectedAlarm
NOTIFICATION-TYPE
Indicates the LAN port 1 status changed to disconnected. Contains a single parameter, which is its description: 1 - Description: LAN port 1 status changed to disconnected.
1.3.6.1.4.1.4458.1000.0.109
lanPort2DisconnectedAlarm
NOTIFICATION-TYPE
Indicates the LAN port 2 status changed to disconnected. Contains a single parameter, which is its description: 1 - Description: LAN port 2 status changed to disconnected.
1.3.6.1.4.1.4458.1000.0.110
mngPortDisconnectedAlarm
NOTIFICATION-TYPE
Indicates the LAN1 port status changed to disconnected. Contains a single parameter, which is its description: 1 - Description: LAN1 port status changed to disconnected.
1.3.6.1.4.1.4458.1000.0.111
externalAlarmInPort3Alarm
NOTIFICATION-TYPE
The trap is sent every time an alarm occurs in the External Alarm Input of port #3. Contains a single parameter, which is its description: 1 - Description: External Alarm 3 - - Alarm.
1.3.6.1.4.1.4458.1000.0.112
externalAlarmInPort4Alarm
NOTIFICATION-TYPE
The trap is sent every time an alarm occurs in the External Alarm Input of port #4. Contains a single parameter, which is its description: 1 - Description: External Alarm 4 - - Alarm.
1.3.6.1.4.1.4458.1000.0.113
swVersionsMismatchFullCompatibilityAlarm
NOTIFICATION-TYPE
The trap is sent if SW versions mismatch with full link functionality. Contains a single parameter, which is its description: 1 - Description: Software versions mismatch - full link functionality
1.3.6.1.4.1.4458.1000.0.114
swVersionsMismatchRestrictedCompatibilityAlarm
NOTIFICATION-TYPE
The trap is sent if SW versions mismatch with restricted link functionality. Contains a single parameter, which is its description: 1 - Description: Software versions mismatch - restricted link functionality
1.3.6.1.4.1.4458.1000.0.115
swVersionsMismatchSoftwareUpgradeRequired
NOTIFICATION-TYPE
The trap is sent if SW versions mismatch and SW upgrade is required. Contains a single parameter, which is its description: 1 - Description: Software versions mismatch - Software upgrade required
1.3.6.1.4.1.4458.1000.0.116
swVersionsIncompatible
NOTIFICATION-TYPE
The trap is sent if SW versions are incompatible. Contains a single parameter, which is its description: 1 - Description: SW Versions incompatible
1.3.6.1.4.1.4458.1000.0.117
hssMultipleSourcesDetectedAlarm
NOTIFICATION-TYPE
Indicates that multiple sync pulse sources were detected. Contains a single parameter, which is its description: 1 - Description: HSS multiple sync sources were detected.
1.3.6.1.4.1.4458.1000.0.118
hssSyncToProperSourceStoppedAlarm
NOTIFICATION-TYPE
Indicates that synchronization to a proper sync pulse source was stopped. Contains a single parameter, which is its description: 1 - Description: HSS sync pulse - Down. The reason is: %s. %s - Is the reason for the sync down.
1.3.6.1.4.1.4458.1000.0.119
hssSyncPulseDetectedAlarm
NOTIFICATION-TYPE
Indicates that HSS additional sync pulse was detected. Contains a single parameter, which is its description: 1 - Description: HSS additional sync pulse was detected.
1.3.6.1.4.1.4458.1000.0.120
tdmBackupAlarm
NOTIFICATION-TYPE
Indicates that the TDM backup link was activated. Contains a single parameter, which is its description: 1 - Description: TDM backup alarm - backup link was activated.
1.3.6.1.4.1.4458.1000.0.121
linkLockUnauthorizedRemoteODU
NOTIFICATION-TYPE
Indicates that the remote ODU is unauthorized. Contains a single parameter, which is its description: 1 - Description: Unauthorized remote ODU connection rejected.
1.3.6.1.4.1.4458.1000.0.122
linkLockUnauthorizedODU
NOTIFICATION-TYPE
Indicates that the ODU is unauthorized. Contains a single parameter, which is its description: 1 - Description: Unauthorized ODU connection rejected.
1.3.6.1.4.1.4458.1000.0.123
hotStandbyAlarm
NOTIFICATION-TYPE
Indicates that the hot standby secondary link was activated. Contains a single parameter, which is its description: 1 - Description: Secondary Link Is Active.
1.3.6.1.4.1.4458.1000.0.124
sfpInsertion
NOTIFICATION-TYPE
Indicates that a device was inserted to SFP Port
1.3.6.1.4.1.4458.1000.0.126
sfpPort1DisconnectedAlarm
NOTIFICATION-TYPE
Indicates the SFP port 1 status changed to disconnected. Contains a single parameter which is its description: 1 - Description: SFP port 1 status changed to disconnected.
1.3.6.1.4.1.4458.1000.0.127
ringRplStateActiveAlarm
NOTIFICATION-TYPE
RPL state changed to Active.
1.3.6.1.4.1.4458.1000.0.128
desiredRatioCanNotBeAppliedAlarm
NOTIFICATION-TYPE
Indicates Desired UL/DL RAtio Can Not Be Applied.
1.3.6.1.4.1.4458.1000.0.129
cbwMismatch
NOTIFICATION-TYPE
Indicates that a Channel Bandwidth mismatch was detected. Contains two parameters: 1 - Description: Channel Bandwidth Mismatch: one side is %n0 MHz and the other is %n1 MHz. %n0 is the local Channel Bandwidth value in MHz. %n1 is the remoet Channel Bandwidth value in MHz.
1.3.6.1.4.1.4458.1000.0.130
gpsNotSynchronized
NOTIFICATION-TYPE
Indicates that the GPS is not synchronized with satellites. Pulses are self generated.
1.3.6.1.4.1.4458.1000.0.131
pdTooHighDueCbwLimitations
NOTIFICATION-TYPE
Indicates that link cannot be established because link range is too large for channel bandwidth.
1.3.6.1.4.1.4458.1000.0.132
hbsEncryptionAlarm
NOTIFICATION-TYPE
Indicates an encryption key mismatch. Contains a single parameter, which is its description, including the HSU's name
1.3.6.1.4.1.4458.1000.0.133
hbsEhServiceClosedToHsu
NOTIFICATION-TYPE
Indicates an encryption key mismatch. Contains a single parameter, which is its description, including the HSU's name
1.3.6.1.4.1.4458.1000.0.134
hbsUnsynchronizedHsuAlarm
NOTIFICATION-TYPE
Indicates a registered HSU lost synchronization.
1.3.6.1.4.1.4458.1000.0.135
hbsInactiveHbsAlarm
NOTIFICATION-TYPE
Indicates HBS is InActive.
1.3.6.1.4.1.4458.1000.0.136
incompatibleHsu
NOTIFICATION-TYPE
Indicates that the HSU is not compatible to HBS. Contains a single parameter, which is its description: 1 - Description: Incompatible ODUs.
1.3.6.1.4.1.4458.1000.0.137
hsuUnsupportedBeacon
NOTIFICATION-TYPE
Indicates an unsupported beacon has arrived at HSU
1.3.6.1.4.1.4458.1000.0.138
lanPortDisconnectedAlarm
NOTIFICATION-TYPE
Indicates the LAN port status changed to disconnected. Contains a single parameter, which is its description: 1 - Description: LAN port status changed to disconnected.
1.3.6.1.4.1.4458.1000.0.139
poePortDisconnectedAlarm
NOTIFICATION-TYPE
Indicates the LAN2 port status changed to disconnected. Contains a single parameter, which is its description: 1 - Description: LAN2 port status changed to disconnected.
1.3.6.1.4.1.4458.1000.0.140
poePowerConsumptionAlarm
NOTIFICATION-TYPE
Indicates the POE Power Consumption is above allowed maximum. Contains a single parameter, which is its description: 1 - Description: POE consumption above allowed maximum. port closed.
1.3.6.1.4.1.4458.1000.0.141
hobupFaultyStateAlarm
NOTIFICATION-TYPE
This Alarm will indicate that the Hot Backup module is in faulty state. 1 - Description: Hot Backup fault detected: %s unit. %s - Primary Or Secondary Unit
1.3.6.1.4.1.4458.1000.0.149
gpsOverCurrentAlarm
NOTIFICATION-TYPE
Indicates the GPS Antenna current consumption is above allowed maximum. Contains a single parameter, which is its description: 1 - Description: GPS Antenna current consumption above allowed maximum. GPS closed.
1.3.6.1.4.1.4458.1000.0.150
gpsCommunicationFailiureAlarm
NOTIFICATION-TYPE
Indicates the GPS data isn't received. Contains a single parameter, which is its description: 1 - Description: GPS Communication failiure.
1.3.6.1.4.1.4458.1000.0.151
temperatureThresholdAlarm
NOTIFICATION-TYPE
Indicates the board temperature is above allowed maximum. Contains a single parameter, which is its description: 1 - Description: GPS Antenna current consumption above allowed maximum. GPS closed.
1.3.6.1.4.1.4458.1000.0.152
localRouterDiscoveryStatus
NOTIFICATION-TYPE
This Alarm will indicate that we have no connection with local train router. 1 - Description: MacLearningUpdate detected disconnection with local train router %s %s - local train IP
1.3.6.1.4.1.4458.1000.0.153
trackRouterDiscoveryStatus
NOTIFICATION-TYPE
This Alarm will indicate that we have no connection with Track side router. 1 - Description: MacLearningUpdate detected disconnection with Track side router %s %s - Default gateway IP
1.3.6.1.4.1.4458.1000.0.154
lastUserSnmpAccessOverHourAgo
NOTIFICATION-TYPE
This trap will indicate that the last access of the accessing user was more than an hour ago. 1 - Description: User %s performed SNMP access after more than an hour. %s - user name
1.3.6.1.4.1.4458.1000.0.155
btsTargetUnreachable
NOTIFICATION-TYPE
This Alarm will indicate that we have no connection with Bts desired target. 1 - Description: TNC detected disconnection with the BTS target %s %s - Default gateway IP
1.3.6.1.4.1.4458.1000.0.156
tdmServiceClear
NOTIFICATION-TYPE
Indicates that TDM Service fault is cleared. Contains a single parameter, which is its description: 1 - Description: TDM Service - Normal.
1.3.6.1.4.1.4458.1000.0.200
ethServiceOpened
NOTIFICATION-TYPE
Indicates that Ethernet Service has been opened. Contains a single parameter, which is its description: 1 - Description: Ethernet Service has been opened.
1.3.6.1.4.1.4458.1000.0.201
encryptionClear
NOTIFICATION-TYPE
Indicates that encryption is OK. Contains a single parameter, which is its description: 1 - Description: Encryption Status - Normal.
1.3.6.1.4.1.4458.1000.0.203
changeLinkPasswordClear
NOTIFICATION-TYPE
Indicates that the Link Password was changed successfully. Contains a single parameter, which is its description: 1 - Description: Link Password has been changed at/on: %s. %s - Is the Local Site name or Remote Site name or both sides of the Link.
1.3.6.1.4.1.4458.1000.0.204
externalAlarmInPort1Clear
NOTIFICATION-TYPE
This Trap is sent every time an External Alarm Input fault of port # 1 is cleared. Contains a single parameter, which is its description: 1 - Description: External Alarm 1 - - Alarm Cleared.
1.3.6.1.4.1.4458.1000.0.205
externalAlarmInPort2Clear
NOTIFICATION-TYPE
This Trap is sent every time an External Alarm Input fault of port # 2 is cleared. Contains a single parameter, which is its description: 1 - Description: External Alarm 2 - - Alarm Cleared.
1.3.6.1.4.1.4458.1000.0.206
lanPort1Clear
NOTIFICATION-TYPE
Indicates the LAN port 1 status changed to connected. Contains two parameters: 1 - Description: LAN port 1 status changed to connected - %s 2 - %s Is the Eth. mode (speed & duplex)
1.3.6.1.4.1.4458.1000.0.209
lanPort2Clear
NOTIFICATION-TYPE
Indicates the LAN port 2 status changed to connected. Contains two parameters: 1 - Description: LAN port 2 status changed to connected - %s. 2 - %s Is the Eth. mode (speed & duplex).
1.3.6.1.4.1.4458.1000.0.210
mngPortClear
NOTIFICATION-TYPE
Indicates the LAN1 port status changed to connected. Contains two parameters: 1 - Description: LAN1 port status changed to connected - %s 2 - %s Is the Eth. mode (speed & duplex)
1.3.6.1.4.1.4458.1000.0.211
externalAlarmInPort3Clear
NOTIFICATION-TYPE
This Trap is sent every time an External Alarm Input fault of port # 3 is cleared. Contains a single parameter, which is its description: 1 - Description: External Alarm 3 - - Alarm Cleared.
1.3.6.1.4.1.4458.1000.0.212
externalAlarmInPort4Clear
NOTIFICATION-TYPE
This Trap is sent every time an External Alarm Input fault of port # 4 is cleared. Contains a single parameter, which is its description: 1 - Description: External Alarm 4 - - Alarm Cleared.
1.3.6.1.4.1.4458.1000.0.213
swVersionsMatchFullCompatibilityClear
NOTIFICATION-TYPE
The trap is sent if SW versions match. Contains a single parameter, which is its description: 1 - Description: Software Versions compatible
1.3.6.1.4.1.4458.1000.0.214
swVersionsMatchRestrictedCompatibilityClear
NOTIFICATION-TYPE
The trap is sent if SW versions match and link functionality is not restricted. Contains a single parameter, which is its description: 1 - Description: Software Versions compatible
1.3.6.1.4.1.4458.1000.0.215
swVersionsMatchSoftwareUpgradeRequiredClear
NOTIFICATION-TYPE
The trap is sent if SW versions match and SW upgrade is successful. Contains a single parameter, which is its description: 1 - Description: Software Versions compatible
1.3.6.1.4.1.4458.1000.0.216
swVersionsCompatibleClear
NOTIFICATION-TYPE
The trap is sent if SW versions compatible Contains a single parameter, which is its description: 1 - Description: Software Versions compatible
1.3.6.1.4.1.4458.1000.0.217
hssMultipleSourcesDisappearedClear
NOTIFICATION-TYPE
Indicates that multiple sync pulse sources disappeared. Contains a single parameter, which is its description: 1 - Description: HSS multiple sync pulse sources disappeared.
1.3.6.1.4.1.4458.1000.0.218
hssSyncToProperSourceAchievedClear
NOTIFICATION-TYPE
Indicates that synchronization to a proper Sync source was achieved. Contains a single parameter, which is its description: 1 - Description: HSS sync pulse - Up.
1.3.6.1.4.1.4458.1000.0.219
hssSyncPulseDisappearedClear
NOTIFICATION-TYPE
Indicates that HSS additional sync pulse disappeared. Contains a single parameter, which is its description: 1 - Description: HSS additional sync pulse was disappeared.
1.3.6.1.4.1.4458.1000.0.220
tdmBackupClear
NOTIFICATION-TYPE
Indicates that the TDM main link was activated. Contains a single parameter, which is its description: 1 - Description: TDM main link was activated.
1.3.6.1.4.1.4458.1000.0.221
linkLockAuthorizedRemoteODU
NOTIFICATION-TYPE
Indicates that the remote ODU is authorized. Contains a single parameter, which is its description: 1 - Description: Authorized remote ODU connection accepted.
1.3.6.1.4.1.4458.1000.0.222
linkLockAuthorizedODU
NOTIFICATION-TYPE
Indicates that the ODU is authorized. Contains a single parameter, which is its description: 1 - Description: Authorized ODU connection permitted.
1.3.6.1.4.1.4458.1000.0.223
linkAuthenticationDisabled
NOTIFICATION-TYPE
Indicates that the Link Lock is disabled. Contains a single parameter, which is its description: 1 - Description: Link Authentication has been disabled.
1.3.6.1.4.1.4458.1000.0.224
hotStandbyClear
NOTIFICATION-TYPE
Indicates that the Primary Link Was Activated. Contains a single parameter, which is its description: 1 - Description: Primary Link Is Active.
1.3.6.1.4.1.4458.1000.0.225
sfpExtraction
NOTIFICATION-TYPE
Indicates that a device was extracted from SFP Port
1.3.6.1.4.1.4458.1000.0.226
sfpPort1Clear
NOTIFICATION-TYPE
Indicates the SFP port 1 status changed to connected. Contains two parameters: 1 - Description: SFP port 1 status changed to connected - %s 2 - %s Is the Eth. mode (speed & duplex)
1.3.6.1.4.1.4458.1000.0.227
compatibleIdus
NOTIFICATION-TYPE
Indicates that the ODU has identified compatible Idus on both sides of the link.
1.3.6.1.4.1.4458.1000.0.228
desiredRatioCanNotBeAppliedClear
NOTIFICATION-TYPE
Indicates Current UL/DL Ratio Is Equal To Desired Ratio.
1.3.6.1.4.1.4458.1000.0.229
cbwMatch
NOTIFICATION-TYPE
Indicates that a Channel Bandwidth match was detected. Contains a single parameter, which is its description: 1 - Channel Bandwidth value in MHz.
1.3.6.1.4.1.4458.1000.0.230
switchCbwAndChannel
NOTIFICATION-TYPE
Indicates that the system is switching Channel Bandwidth and channel frequency. Contains two parameters: 1 - Switching to Channel Bandwith %n0 MHz and to channel %n1 GHz.
1.3.6.1.4.1.4458.1000.0.231
ringRplStateIdle
NOTIFICATION-TYPE
RPL state changed to Idle.
1.3.6.1.4.1.4458.1000.0.232
ringEthServiceStatus
NOTIFICATION-TYPE
Indicates Ethernet service's state - blocked \ unblocked. Contains a single parameter: 1 - Description: Ethernet's state (blocked \ unblocked)
1.3.6.1.4.1.4458.1000.0.233
ringFirstRpmReceived
NOTIFICATION-TYPE
Ring application: in non-RPL link indicates first from a specific RPL was received. Contains a single parameter: 1 - Description: RPM's VLAN ID
1.3.6.1.4.1.4458.1000.0.234
ringEthernetSrviceUnblockedTO
NOTIFICATION-TYPE
Ring application: in non-RPL link Ethernet service is unblocked due to RPM timeout.
1.3.6.1.4.1.4458.1000.0.235
gpsSynchronized
NOTIFICATION-TYPE
Indicates that the GPS is synchronized with satellites.
1.3.6.1.4.1.4458.1000.0.236
hbsEncryptionClear
NOTIFICATION-TYPE
Indicates that encryption is OK. Contains a single parameter, which is its description, including the HSU's name
1.3.6.1.4.1.4458.1000.0.237
hbsEhServiceOpenedToHsu
NOTIFICATION-TYPE
Indicates that encryption is OK. Contains a single parameter, which is its description, including the HSU's name
1.3.6.1.4.1.4458.1000.0.238
hbsSynchronizedHsuAlarm
NOTIFICATION-TYPE
Indicates a registered HSU is synchronized.
1.3.6.1.4.1.4458.1000.0.239
hbsActiveHbs
NOTIFICATION-TYPE
Indicates when HBS has been activated.
1.3.6.1.4.1.4458.1000.0.240
switchCBW
NOTIFICATION-TYPE
Switching Channel Bandwidth.
1.3.6.1.4.1.4458.1000.0.241
changeRatio
NOTIFICATION-TYPE
HBS Tx ratio has changed.
1.3.6.1.4.1.4458.1000.0.242
lanPortClear
NOTIFICATION-TYPE
Indicates the LAN port status changed to connected. Contains two parameters: 1 - Description: LAN port status changed to connected - %s 2 - %s Is the Eth. mode (speed & duplex)
1.3.6.1.4.1.4458.1000.0.243
poePortClear
NOTIFICATION-TYPE
Indicates the LAN2 port status changed to connected. Contains two parameters: 1 - Description: LAN2 port status changed to connected - %s 2 - %s Is the Eth. mode (speed & duplex)
1.3.6.1.4.1.4458.1000.0.244
poePowerConsumptionClear
NOTIFICATION-TYPE
Indicates the POE power consumption is valid. Contains two parameters: 1 - Description: POE consumption within limits. port is opened. 2 - %s Is the Eth. mode (speed & duplex)
1.3.6.1.4.1.4458.1000.0.245
incompatibleHbsHsu
NOTIFICATION-TYPE
Incompatible HBS/HSU software versions - no service.
1.3.6.1.4.1.4458.1000.0.246
mobilityLinkOff
NOTIFICATION-TYPE
Mobility - Link cannot be established due to: 1 - The HBS does not support Mobility 2 - Lack of resources in the HBS for HSU level
1.3.6.1.4.1.4458.1000.0.247
enterLocalConnection
NOTIFICATION-TYPE
Entering Local Connection (Broadcast) Mode.
1.3.6.1.4.1.4458.1000.0.248
hobupActiveStateFaultyClear
NOTIFICATION-TYPE
this clear alarm will indicate that the Hot Backup unit is in active state. Contains a single parameter, which is its description: 1 - Description: Hot Backup %s unit activated. %s - Primary Or Secondary Unit
1.3.6.1.4.1.4458.1000.0.249
hobupStandbyState
NOTIFICATION-TYPE
This info fault will indicate that the Hot backup module has entered standby/peer_detection state Contains a single parameter, which is its description: 1 - Description: Hot Backup in Standby state: %s unit. %s - Primary Or Secondary Unit
1.3.6.1.4.1.4458.1000.0.250
gpsOverCurrentClear
NOTIFICATION-TYPE
Indicates the GPS Antenna current consumption is valid.
1.3.6.1.4.1.4458.1000.0.251
temperatureThresholdClear
NOTIFICATION-TYPE
Indicates the board temperature is valid.
1.3.6.1.4.1.4458.1000.0.252
localRouterDiscoverySucceed
NOTIFICATION-TYPE
Indicated the we succeeded to discover train router in ip %s MAC address %s %s Train IP %s Train MAC Address
1.3.6.1.4.1.4458.1000.0.253
trackRouterDiscoverySucceed
NOTIFICATION-TYPE
Indicated the we succeeded to discover track router in ip %s MAC address %s %s Train IP %s Train MAC Address
1.3.6.1.4.1.4458.1000.0.254
qosVersion2StrictMismatch
NOTIFICATION-TYPE
CPE doesn't support strict QOS configuration.
1.3.6.1.4.1.4458.1000.0.255
qosVersion2TtlMismatch
NOTIFICATION-TYPE
CPE doesn't support TTL configuration.
1.3.6.1.4.1.4458.1000.0.256
btsTargetIsReachable
NOTIFICATION-TYPE
Indicated the we succeeded to establish connection with the Bts desired target (%s) %s Target IP
1.3.6.1.4.1.4458.1000.0.257
tcNotSupportedByHSU
NOTIFICATION-TYPE
CPE doesn't support TC functionality.
1.3.6.1.4.1.4458.1000.0.258
syncEPortHOStateChange
NOTIFICATION-TYPE
Enter/leave HO state of SyncE port.
1.3.6.1.4.1.4458.1000.0.259
syncEPortFailureStateChange
NOTIFICATION-TYPE
Enter/leave Failure state of SyncE port.
1.3.6.1.4.1.4458.1000.0.260
btsCpeUpdateServiceFailed
NOTIFICATION-TYPE
Update service Failed
1.3.6.1.4.1.4458.1000.0.261
btsCpeUpdateServiceSucceed
NOTIFICATION-TYPE
Update service Succeed
1.3.6.1.4.1.4458.1000.0.262
radiusServerNoREsponse
NOTIFICATION-TYPE
No response from radius server
1.3.6.1.4.1.4458.1000.0.263
noRadiusServerRespond
NOTIFICATION-TYPE
Alarm indicates that no Radius server is connected
1.3.6.1.4.1.4458.1000.0.264
radiusServerRespondedSuccessfully
NOTIFICATION-TYPE
indicates that Radius server responded seccessfully.
1.3.6.1.4.1.4458.1000.0.265
bsaAlignmentStarted
NOTIFICATION-TYPE
Indicate the beginning of Alignment Process
1.3.6.1.4.1.4458.1000.0.266
bsaAlignmentFinished
NOTIFICATION-TYPE
Indicate the completion of Alignment Process
1.3.6.1.4.1.4458.1000.0.267
bsaAlignmentTriggered
NOTIFICATION-TYPE
Indicate the triggering of Alignment Process due to exceeding thresholds
1.3.6.1.4.1.4458.1000.0.268