PTPBASE-MIB
- Registered at
- 1.3.6.1.2.1.241
- Last updated
- 2017-05-30 00:00
- Organization
- TICTOC Working Group
- Revisions
- 2017-05-30 00:00
- Namespace
- standard
- Source file
PTPBASE-MIB- Digest
sha256:5415eff9db31e45cfc18be05ad4df1fe6a61877c867bdabede60776809006223
Description
The MIB module for PTP version 2 Copyright (c) 2017 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). Overview of PTP version 2 (IEEE Std. 1588-2008) [IEEE-1588-2008] defines a protocol enabling precise synchronization of clocks in measurement and control systems implemented with packet-based networks, the Precision Time Protocol version 2 (PTPv2). This MIB module does not address PTPv1, the earlier version defined in IEEE Std. 1588-2002. The protocol is applicable to network elements communicating using IP. The protocol enables heterogeneous systems that include clocks of various inherent precision, resolution, and stability to synchronize to a grandmaster clock. The protocol supports system-wide synchronization accuracy in the sub-microsecond range with minimal network and local clock computing resources. [IEEE-1588-2008] uses UDP/IP or Ethernet and can be adapted to other mappings. It includes formal mechanisms for message extensions, higher sampling rates, correction for asymmetry, a clock type to reduce error accumulation in large topologies, and specifications on how to incorporate the resulting additional data into the synchronization protocol. [IEEE-1588-2008] also defines conformance and management capability. MIB description This MIB module supports the Precision Time Protocol version 2 (PTPv2, hereafter designated as PTP) features of network element system devices, when using the default PTP profile described in [IEEE-1588-2008] when running over the IP network layer. It is envisioned that this MIB module will complement other managed objects to be defined to monitor and measure the performance of the PTP devices and telecom clocks supporting specific PTP profiles. Some other PTP profiles have their own MIB modules defined as part of the profile, and this MIB module is not intended to replace those MIB modules. Technical terms used in this module are defined in [IEEE-1588-2008]. The MIB module refers to sections of [IEEE-1588-2008]. Abbreviations: E2E End-to-End EUI Extended Unique Identifier GPS Global Positioning System IANA Internet Assigned Numbers Authority IP Internet Protocol NTP Network Time Protocol (see [RFC5905]) P2P Peer-to-Peer PTP Precision Time Protocol TAI International Atomic Time UDP User Datagram Protocol UTC Coordinated Universal Time References: [IEEE-1588-2008] IEEE Standard for A Precision Clock Synchronization Protocol for Networked Measurement and Control Systems, IEEE Std. 1588-2008, July 2008. The below table specifies the object formats of the various textual conventions used. Data type mapping Textual Convention SYNTAX ------------------- --------------------- ------------------ 5.3.2 TimeInterval PtpClockTimeInterval OCTET STRING(SIZE(1..255)) 5.3.3 Timestamp PtpClockTimestamp OCTET STRING(SIZE(6)) 5.3.4 ClockIdentity PtpClockIdentity OCTET STRING(SIZE(8)) 5.3.5 PortIdentity PtpClockPortNumber INTEGER(1..65535) 5.3.7 ClockQuality PtpClockQualityClassType
Contact
WG Email: tictoc@ietf.org Vinay Shankarkumar Cisco Systems Email: vinays@cisco.com Laurent Montini Cisco Systems Email: lmontini@cisco.com Tim Frost Calnex Solutions Ltd. Email: tim.frost@calnexsol.com Greg Dowd Microsemi Inc. Email: greg.dowd@microsemi.com
Imports
| From | Symbols |
|---|---|
| IF-MIB | InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Counter64, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso, mib-2 |
| SNMPv2-TC | AutonomousType, DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB IF-MIB PTPBASE-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| PtpClockDomainType TEXTUAL-CONVENTION The Domain is identified by an integer, the domainNumber, in the range of 0 to 255. An integer value that is used to assign each PTP device to a particular domain. | current | |||
| PtpClockIdentity TEXTUAL-CONVENTION The clock identity is an 8-octet array and will be presented in the form of a character array. Network byte order is assumed. The value of the PtpClockIdentity should be taken from the IEEE EUI-64 individual assigned numbers as indicated in Section 7.5.2.2.2 of [IEEE-1588-2008]. It can also be a non-EUI-64 address as defined in Section 7.5.2.2.3 of [IEEE-1588-2008]. The clock identifier can be constructed from existing EUI-48 assignments. | current | |||
| PtpClockInstanceType TEXTUAL-CONVENTION The instance of the clock of a given clock type in a given domain. | current | |||
| PtpClockIntervalBase2 TEXTUAL-CONVENTION The interval included in message types Announce, Sync, Delay_Req, and Pdelay_Req as indicated in Section 7.7.2.1 of [IEEE-1588-2008]. | current | |||
| PtpClockMechanismType TEXTUAL-CONVENTION The clock type based on whether end-to-end or peer-to-peer mechanisms are used. The mechanism used to calculate the Mean Path Delay as indicated in Table 9 of [IEEE-1588-2008]. | current | |||
| PtpClockPortNumber TEXTUAL-CONVENTION An index identifying a specific PTP port on a PTP node. | current | |||
| PtpClockPortState TEXTUAL-CONVENTION This is the value of the current state of the protocol engine associated with this port. | current | |||
| PtpClockPortTransportTypeAddress TEXTUAL-CONVENTION The clock port transport protocol address used for this communication between the clock nodes. This is a string corresponding to the address type as specified by the transport type used. The transport types can be defined elsewhere, in addition to the ones defined in this document. This can be an address of type IP version 4, IP version 6, Ethernet, DeviceNET, ControlNET, or IEC61158. The OCTET STRING representation of the OID of ptpbaseWellKnownTransportTypes will be used in the values contained in the OCTET STRING. | current | |||
| PtpClockProfileType TEXTUAL-CONVENTION Clock Profile used. A profile is the set of allowed PTP features applicable to a device. | current | |||
| PtpClockQualityAccuracyType TEXTUAL-CONVENTION The ClockQuality as specified in Section 5.3.7, Section 7.6.2.5, and Table 6 of [IEEE-1588-2008]. The following values are not represented in the enumerated values. 0x01-0x1F Reserved 0x32-0x7F Reserved It is important to note that Section 7.1.1 of RFC 2578 allows for gaps and for enumerated values to start at zero when indicated by the protocol. | current | |||
| PtpClockQualityClassType TEXTUAL-CONVENTION The ClockQuality as specified in Section 5.3.7, Section 7.6.2.4, and Table 5 of [IEEE-1588-2008]. | current | |||
| PtpClockRoleType TEXTUAL-CONVENTION The Clock Role. The protocol generates a master-slave relationship among the clocks in the system. Clock Role Value ------------------------- Master clock 1 Slave clock 2 | current | |||
| PtpClockStateType TEXTUAL-CONVENTION The clock state returned by a PTP engine. Clock State Value ------------------------ Freerun state 1 Holdover state 2 Acquiring state 3 Freq_locked state 4 Phase_aligned state 5 | current | |||
| PtpClockTimeInterval TEXTUAL-CONVENTION This textual convention corresponds to the TimeInterval structure indicated in Section 5.3.2 of [IEEE-1588-2008]. It will be presented in the form of a character array. Network byte order is assumed. | current | |||
| PtpClockTimeSourceType TEXTUAL-CONVENTION The ClockQuality as specified in Sections 5.3.7, Section 7.6.2.6, and Table 7 of [IEEE-1588-2008]. The following values are not represented in the enumerated values. 0xF0-0xFE For use by alternate PTP profiles 0xFF Reserved It is important to note that Section 7.1.1 of RFC 2578 allows for gaps and for enumerated values to start at zero when indicated by the protocol. | current | |||
| PtpClockTxModeType TEXTUAL-CONVENTION Transmission mode. Unicast: Using unicast communication channel. Multicast: Using Multicast communication channel. multicast-mix: Using multicast-unicast communication channel | current | |||
| PtpClockType TEXTUAL-CONVENTION The clock types as defined in the MIB module description. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ptpbaseMIBNotifs OBJECT-IDENTITY | 1.3.6.1.2.1.241.0 | |||
| ptpbaseMIBObjects OBJECT-IDENTITY | 1.3.6.1.2.1.241.1 | |||
| ptpbaseMIBSystemInfo OBJECT-IDENTITY | 1.3.6.1.2.1.241.1.1 | |||
| ptpbaseSystemTable OBJECT-TYPE Table of count information about the PTP system for all domains. | 1.3.6.1.2.1.241.1.1.1 | not-accessible | current | |
| ptpbaseSystemEntry OBJECT-TYPE A table entry that contains count information about a single domain. New row entries are added when the PTP clock for this domain is configured, while the unconfiguration of the PTP clock removes them. | 1.3.6.1.2.1.241.1.1.1.1 | not-accessible | current | |
| ptpDomainIndex OBJECT-TYPE This object specifies the domain number used to create a logical group of PTP devices. The Clock Domain is a logical group of clocks and devices that synchronize with each other using the PTP protocol. 0 Default domain 1 Alternate domain 1 2 Alternate domain 2 3 Alternate domain 3 4 - 127 User-defined domains 128 - 255 Reserved | 1.3.6.1.2.1.241.1.1.1.1.1 | PtpClockDomainType | not-accessible | current |
| ptpInstanceIndex OBJECT-TYPE This object specifies the instance of the clock for this domain. | 1.3.6.1.2.1.241.1.1.1.1.2 | PtpClockInstanceType | not-accessible | current |
| ptpDomainClockPortsTotal OBJECT-TYPE This object specifies the total number of clock ports configured within a domain in the system. | 1.3.6.1.2.1.241.1.1.1.1.3 | Gauge32 | read-only | current |
| ptpbaseSystemDomainTable OBJECT-TYPE Table of information about the PTP system for all clock modes -- ordinary, boundary, or transparent. | 1.3.6.1.2.1.241.1.1.2 | not-accessible | current | |
| ptpbaseSystemDomainEntry OBJECT-TYPE A table entry that contains information about a single clock mode for the PTP system. A row entry gets added when PTP clocks are configured on the node. | 1.3.6.1.2.1.241.1.1.2.1 | not-accessible | current | |
| ptpbaseSystemDomainClockTypeIndex OBJECT-TYPE This object specifies the clock type as defined in the textual convention description. | 1.3.6.1.2.1.241.1.1.2.1.1 | PtpClockType | not-accessible | current |
| ptpbaseSystemDomainTotals OBJECT-TYPE This object specifies the total number of PTP domains for this particular clock type configured in this node. | 1.3.6.1.2.1.241.1.1.2.1.2 | Unsigned32 | read-only | current |
| ptpbaseSystemProfile OBJECT-TYPE This object specifies the PTP profile implemented on the system. | 1.3.6.1.2.1.241.1.1.3 | PtpClockProfileType | read-only | current |
| ptpbaseMIBClockInfo OBJECT-IDENTITY | 1.3.6.1.2.1.241.1.2 | |||
| ptpbaseClockCurrentDSTable OBJECT-TYPE Table of information about the PTP clock currentDS for all domains. | 1.3.6.1.2.1.241.1.2.1 | not-accessible | current | |
| ptpbaseClockCurrentDSEntry OBJECT-TYPE A table entry that contains information about a single PTP clock currentDS for a domain. | 1.3.6.1.2.1.241.1.2.1.1 | not-accessible | current | |
| ptpbaseClockCurrentDSDomainIndex OBJECT-TYPE This object specifies the domain number used to create a logical group of PTP devices. | 1.3.6.1.2.1.241.1.2.1.1.1 | PtpClockDomainType | not-accessible | current |
| ptpbaseClockCurrentDSClockTypeIndex OBJECT-TYPE This object specifies the clock type as defined in the textual convention description. | 1.3.6.1.2.1.241.1.2.1.1.2 | PtpClockType | not-accessible | current |
| ptpbaseClockCurrentDSInstanceIndex OBJECT-TYPE This object specifies the instance of the clock for this clock type in the given domain. | 1.3.6.1.2.1.241.1.2.1.1.3 | PtpClockInstanceType | not-accessible | current |
| ptpbaseClockCurrentDSStepsRemoved OBJECT-TYPE The current clock dataset stepsRemoved value. This object specifies the distance measured by the number of boundary clocks between the local clock and the foreign master as indicated in the stepsRemoved field of Announce messages. | 1.3.6.1.2.1.241.1.2.1.1.4 | Unsigned32 | read-only | current |
| ptpbaseClockCurrentDSOffsetFromMaster OBJECT-TYPE This object specifies the current clock dataset ClockOffset value. The value of the computation of the offset in time between a slave and a master clock. | 1.3.6.1.2.1.241.1.2.1.1.5 | PtpClockTimeInterval | read-only | current |
| ptpbaseClockCurrentDSMeanPathDelay OBJECT-TYPE This object specifies the current clock dataset MeanPathDelay value. The mean path delay between a pair of ports as measured by the delay request-response mechanism. | 1.3.6.1.2.1.241.1.2.1.1.6 | PtpClockTimeInterval | read-only | current |
| ptpbaseClockParentDSTable OBJECT-TYPE Table of information about the PTP clock parentDS for all domains. | 1.3.6.1.2.1.241.1.2.2 | not-accessible | current | |
| ptpbaseClockParentDSEntry OBJECT-TYPE A table entry that contains information about a single PTP clock parentDS for a domain. | 1.3.6.1.2.1.241.1.2.2.1 | not-accessible | current | |
| ptpbaseClockParentDSDomainIndex OBJECT-TYPE This object specifies the domain number used to create a logical group of PTP devices. | 1.3.6.1.2.1.241.1.2.2.1.1 | PtpClockDomainType | not-accessible | current |
| ptpbaseClockParentDSClockTypeIndex OBJECT-TYPE This object specifies the clock type as defined in the textual convention description. | 1.3.6.1.2.1.241.1.2.2.1.2 | PtpClockType | not-accessible | current |
| ptpbaseClockParentDSInstanceIndex OBJECT-TYPE This object specifies the instance of the clock for this clock type in the given domain. | 1.3.6.1.2.1.241.1.2.2.1.3 | PtpClockInstanceType | not-accessible | current |
| ptpbaseClockParentDSParentPortIdentity OBJECT-TYPE This object specifies the value of portIdentity of the port on the master that issues the Sync messages used in synchronizing this clock. | 1.3.6.1.2.1.241.1.2.2.1.4 | OCTET STRING (SIZE(1..256)) | read-only | current |
| ptpbaseClockParentDSParentStats OBJECT-TYPE This object specifies the parentDS ParentStats value. This value indicates whether the values of ParentDSOffset and ParentDSClockPhChRate have been measured and are valid. A TRUE value shall indicate valid data. | 1.3.6.1.2.1.241.1.2.2.1.5 | TruthValue | read-only | current |
| ptpbaseClockParentDSOffset OBJECT-TYPE This object specifies the parentDS ParentOffsetScaledLogVariance value. This value is the variance of the parent clock's phase as measured by the local clock. | 1.3.6.1.2.1.241.1.2.2.1.6 | PtpClockIntervalBase2 (-128..127) | read-only | current |
| ptpbaseClockParentDSClockPhChRate OBJECT-TYPE This object specifies the clock's parentDS ParentClockPhaseChangeRate value. This value is an estimate of the parent clock's phase change rate as measured by the slave clock. | 1.3.6.1.2.1.241.1.2.2.1.7 | Integer32 | read-only | current |
| ptpbaseClockParentDSGMClockIdentity OBJECT-TYPE This object specifies the parentDS grandmaster clock identity. | 1.3.6.1.2.1.241.1.2.2.1.8 | PtpClockIdentity | read-only | current |
| ptpbaseClockParentDSGMClockPriority1 OBJECT-TYPE This object specifies the parentDS grandmaster clock priority1. | 1.3.6.1.2.1.241.1.2.2.1.9 | Unsigned32 | read-only | current |
| ptpbaseClockParentDSGMClockPriority2 OBJECT-TYPE This object specifies the parentDS grandmaster clock priority2. | 1.3.6.1.2.1.241.1.2.2.1.10 | Unsigned32 | read-only | current |
| ptpbaseClockParentDSGMClockQualityClass OBJECT-TYPE This object specifies the parentDS grandmaster clock quality class. | 1.3.6.1.2.1.241.1.2.2.1.11 | PtpClockQualityClassType | read-only | current |
| ptpbaseClockParentDSGMClockQualityAccuracy OBJECT-TYPE This object specifies the parentDS grandmaster clock quality accuracy. | 1.3.6.1.2.1.241.1.2.2.1.12 | PtpClockQualityAccuracyType | read-only | current |
| ptpbaseClockParentDSGMClockQualityOffset OBJECT-TYPE This object specifies the parentDS grandmaster clock quality offset. | 1.3.6.1.2.1.241.1.2.2.1.13 | Unsigned32 | read-only | current |
| ptpbaseClockDefaultDSTable OBJECT-TYPE Table of information about the PTP clock defaultDS for all domains. | 1.3.6.1.2.1.241.1.2.3 | not-accessible | current | |
| ptpbaseClockDefaultDSEntry OBJECT-TYPE A table entry that contains information about a single PTP clock defaultDS for a domain. | 1.3.6.1.2.1.241.1.2.3.1 | not-accessible | current | |
| ptpbaseClockDefaultDSDomainIndex OBJECT-TYPE This object specifies the domain number used to create a logical group of PTP devices. | 1.3.6.1.2.1.241.1.2.3.1.1 | PtpClockDomainType | not-accessible | current |
| ptpbaseClockDefaultDSClockTypeIndex OBJECT-TYPE This object specifies the clock type as defined in the textual convention description. | 1.3.6.1.2.1.241.1.2.3.1.2 | PtpClockType | not-accessible | current |
| ptpbaseClockDefaultDSInstanceIndex OBJECT-TYPE This object specifies the instance of the clock for this clock type in the given domain. | 1.3.6.1.2.1.241.1.2.3.1.3 | PtpClockInstanceType | not-accessible | current |
| ptpbaseClockDefaultDSTwoStepFlag OBJECT-TYPE This object specifies whether the two-step process is used. | 1.3.6.1.2.1.241.1.2.3.1.4 | TruthValue | read-only | current |
| ptpbaseClockDefaultDSClockIdentity OBJECT-TYPE This object specifies the defaultDS clockIdentity member. | 1.3.6.1.2.1.241.1.2.3.1.5 | PtpClockIdentity | read-only | current |
| ptpbaseClockDefaultDSPriority1 OBJECT-TYPE This object specifies the defaultDS priority1 member. | 1.3.6.1.2.1.241.1.2.3.1.6 | Unsigned32 | read-only | current |
| ptpbaseClockDefaultDSPriority2 OBJECT-TYPE This object specifies the defaultDS priority2 member. | 1.3.6.1.2.1.241.1.2.3.1.7 | Unsigned32 | read-only | current |
| ptpbaseClockDefaultDSSlaveOnly OBJECT-TYPE This object specifies whether the SlaveOnly flag is set. | 1.3.6.1.2.1.241.1.2.3.1.8 | TruthValue | read-only | current |
| ptpbaseClockDefaultDSQualityClass OBJECT-TYPE This object specifies the defaultDS Quality Class. | 1.3.6.1.2.1.241.1.2.3.1.9 | PtpClockQualityClassType | read-only | current |
| ptpbaseClockDefaultDSQualityAccuracy OBJECT-TYPE This object specifies the defaultDS Quality Accuracy. | 1.3.6.1.2.1.241.1.2.3.1.10 | PtpClockQualityAccuracyType | read-only | current |
| ptpbaseClockDefaultDSQualityOffset OBJECT-TYPE This object specifies the defaultDS Quality offset. | 1.3.6.1.2.1.241.1.2.3.1.11 | Integer32 | read-only | current |
| ptpbaseClockRunningTable OBJECT-TYPE Table of information about the PTP clock running datasets for all domains. | 1.3.6.1.2.1.241.1.2.4 | not-accessible | current | |
| ptpbaseClockRunningEntry OBJECT-TYPE A table entry that contains information about a single PTP clock running dataset for a domain. | 1.3.6.1.2.1.241.1.2.4.1 | not-accessible | current | |
| ptpbaseClockRunningDomainIndex OBJECT-TYPE This object specifies the domain number used to create a logical group of PTP devices. | 1.3.6.1.2.1.241.1.2.4.1.1 | PtpClockDomainType | not-accessible | current |
| ptpbaseClockRunningClockTypeIndex OBJECT-TYPE This object specifies the clock type as defined in the textual convention description. | 1.3.6.1.2.1.241.1.2.4.1.2 | PtpClockType | not-accessible | current |
| ptpbaseClockRunningInstanceIndex OBJECT-TYPE This object specifies the instance of the clock for this clock type in the given domain. | 1.3.6.1.2.1.241.1.2.4.1.3 | PtpClockInstanceType | not-accessible | current |
| ptpbaseClockRunningState OBJECT-TYPE This object specifies the clock state returned by a PTP engine. | 1.3.6.1.2.1.241.1.2.4.1.4 | PtpClockStateType | read-only | current |
| ptpbaseClockRunningPacketsSent OBJECT-TYPE This object specifies the total number of all unicast and multicast packets that have been sent out for this clock in this domain for this type. These counters are discontinuous. | 1.3.6.1.2.1.241.1.2.4.1.5 | Counter64 | read-only | current |
| ptpbaseClockRunningPacketsReceived OBJECT-TYPE This object specifies the total number of all unicast and multicast packets that have been received for this clock in this domain for this type. These counters are discontinuous. | 1.3.6.1.2.1.241.1.2.4.1.6 | Counter64 | read-only | current |
| ptpbaseClockTimePropertiesDSTable OBJECT-TYPE Table of information about the PTP clock timePropertiesDS for all domains. | 1.3.6.1.2.1.241.1.2.5 | not-accessible | current | |
| ptpbaseClockTimePropertiesDSEntry OBJECT-TYPE A table entry that contains information about a single PTP clock timePropertiesDS for a domain. | 1.3.6.1.2.1.241.1.2.5.1 | not-accessible | current | |
| ptpbaseClockTimePropertiesDSDomainIndex OBJECT-TYPE This object specifies the domain number used to create a logical group of PTP devices. | 1.3.6.1.2.1.241.1.2.5.1.1 | PtpClockDomainType | not-accessible | current |
| ptpbaseClockTimePropertiesDSClockTypeIndex OBJECT-TYPE This object specifies the clock type as defined in the textual convention description. | 1.3.6.1.2.1.241.1.2.5.1.2 | PtpClockType | not-accessible | current |
| ptpbaseClockTimePropertiesDSInstanceIndex OBJECT-TYPE This object specifies the instance of the clock for this clock type in the given domain. | 1.3.6.1.2.1.241.1.2.5.1.3 | PtpClockInstanceType | not-accessible | current |
| ptpbaseClockTimePropertiesDSCurrentUTCOffsetValid OBJECT-TYPE This object specifies the timePropertiesDS value of whether the current UTC offset is valid. | 1.3.6.1.2.1.241.1.2.5.1.4 | TruthValue | read-only | current |
| ptpbaseClockTimePropertiesDSCurrentUTCOffset OBJECT-TYPE This object specifies the timePropertiesDS value of the current UTC offset. In PTP systems whose epoch is the PTP epoch, the value of timePropertiesDS.currentUtcOffset is the offset between TAI and UTC; otherwise, the value has no meaning. The value shall be in units of seconds. | 1.3.6.1.2.1.241.1.2.5.1.5 | Integer32 | read-only | current |
| ptpbaseClockTimePropertiesDSLeap59 OBJECT-TYPE This object specifies the Leap59 value in the clock currentDS. | 1.3.6.1.2.1.241.1.2.5.1.6 | TruthValue | read-only | current |
| ptpbaseClockTimePropertiesDSLeap61 OBJECT-TYPE This object specifies the Leap61 value in the clock currentDS. | 1.3.6.1.2.1.241.1.2.5.1.7 | TruthValue | read-only | current |
| ptpbaseClockTimePropertiesDSTimeTraceable OBJECT-TYPE This object specifies the Time Traceable value in the clock currentDS. | 1.3.6.1.2.1.241.1.2.5.1.8 | TruthValue | read-only | current |
| ptpbaseClockTimePropertiesDSFreqTraceable OBJECT-TYPE This object specifies the Frequency Traceable value in the clock currentDS. | 1.3.6.1.2.1.241.1.2.5.1.9 | TruthValue | read-only | current |
| ptpbaseClockTimePropertiesDSPTPTimescale OBJECT-TYPE This object specifies the PTP Timescale value in the clock currentDS. | 1.3.6.1.2.1.241.1.2.5.1.10 | TruthValue | read-only | current |
| ptpbaseClockTimePropertiesDSSource OBJECT-TYPE This object specifies the Timesource value in the clock currentDS. | 1.3.6.1.2.1.241.1.2.5.1.11 | PtpClockTimeSourceType | read-only | current |
| ptpbaseClockTransDefaultDSTable OBJECT-TYPE Table of information about the PTP transparentClockDefaultDS for all domains. | 1.3.6.1.2.1.241.1.2.6 | not-accessible | current | |
| ptpbaseClockTransDefaultDSEntry OBJECT-TYPE A table entry that contains information about a single PTP transparent clock defaultDS for a domain. | 1.3.6.1.2.1.241.1.2.6.1 | not-accessible | current | |
| ptpbaseClockTransDefaultDSDomainIndex OBJECT-TYPE This object specifies the domain number used to create a logical group of PTP devices. | 1.3.6.1.2.1.241.1.2.6.1.1 | PtpClockDomainType | not-accessible | current |
| ptpbaseClockTransDefaultDSInstanceIndex OBJECT-TYPE This object specifies the instance of the clock for this clock type in the given domain. | 1.3.6.1.2.1.241.1.2.6.1.2 | PtpClockInstanceType | not-accessible | current |
| ptpbaseClockTransDefaultDSClockIdentity OBJECT-TYPE This object specifies the value of the clockIdentity attribute of the local clock. | 1.3.6.1.2.1.241.1.2.6.1.3 | PtpClockIdentity | read-only | current |
| ptpbaseClockTransDefaultDSNumOfPorts OBJECT-TYPE This object specifies the number of PTP ports of the device. These counters are discontinuous. | 1.3.6.1.2.1.241.1.2.6.1.4 | Counter32 | read-only | current |
| ptpbaseClockTransDefaultDSDelay OBJECT-TYPE This object, if the transparent clock is an end-to-end transparent clock, has the value of e2e; if the transparent clock is a peer-to-peer transparent clock, the value is p2p. | 1.3.6.1.2.1.241.1.2.6.1.5 | PtpClockMechanismType | read-only | current |
| ptpbaseClockTransDefaultDSPrimaryDomain OBJECT-TYPE This object specifies the value of the primary syntonization domain. The initialization value is 0. | 1.3.6.1.2.1.241.1.2.6.1.6 | PtpClockDomainType | read-only | current |
| ptpbaseClockPortTable OBJECT-TYPE Table of information about the clock ports for a particular domain. | 1.3.6.1.2.1.241.1.2.7 | not-accessible | current | |
| ptpbaseClockPortEntry OBJECT-TYPE A table entry that contains information about a single clock port. | 1.3.6.1.2.1.241.1.2.7.1 | not-accessible | current | |
| ptpbaseClockPortDomainIndex OBJECT-TYPE This object specifies the domain number used to create a logical group of PTP devices. | 1.3.6.1.2.1.241.1.2.7.1.1 | PtpClockDomainType | not-accessible | current |
| ptpbaseClockPortClockTypeIndex OBJECT-TYPE This object specifies the clock type as defined in the textual convention description. | 1.3.6.1.2.1.241.1.2.7.1.2 | PtpClockType | not-accessible | current |
| ptpbaseClockPortClockInstanceIndex OBJECT-TYPE This object specifies the instance of the clock for this clock type in the given domain. | 1.3.6.1.2.1.241.1.2.7.1.3 | PtpClockInstanceType | not-accessible | current |
| ptpbaseClockPortTablePortNumberIndex OBJECT-TYPE This object specifies the PTP portNumber for this port. | 1.3.6.1.2.1.241.1.2.7.1.4 | PtpClockPortNumber | not-accessible | current |
| ptpbaseClockPortName OBJECT-TYPE This object specifies the PTP clock port name configured on the node. | 1.3.6.1.2.1.241.1.2.7.1.5 | DisplayString (SIZE(1..64)) | read-only | current |
| ptpbaseClockPortRole OBJECT-TYPE This object describes the current role (slave/master) of the port. | 1.3.6.1.2.1.241.1.2.7.1.6 | PtpClockRoleType | read-only | current |
| ptpbaseClockPortSyncTwoStep OBJECT-TYPE This object specifies that two-step clock operation between the PTP master and slave device is enabled. | 1.3.6.1.2.1.241.1.2.7.1.7 | TruthValue | read-only | current |
| ptpbaseClockPortCurrentPeerAddressType OBJECT-TYPE This object specifies the current peer's network address type used for PTP communication. | 1.3.6.1.2.1.241.1.2.7.1.8 | AutonomousType | read-only | current |
| ptpbaseClockPortCurrentPeerAddress OBJECT-TYPE This object specifies the current peer's network address used for PTP communication. | 1.3.6.1.2.1.241.1.2.7.1.9 | PtpClockPortTransportTypeAddress | read-only | current |
| ptpbaseClockPortNumOfAssociatedPorts OBJECT-TYPE This object specifies the following: For a master port - the number of PTP slave sessions (peers) associated with this PTP port. For a slave port - the number of masters available to this slave port (might or might not be peered). | 1.3.6.1.2.1.241.1.2.7.1.10 | Gauge32 | read-only | current |
| ptpbaseClockPortDSTable OBJECT-TYPE Table of information about the clock's portDS for a particular domain. | 1.3.6.1.2.1.241.1.2.8 | not-accessible | current | |
| ptpbaseClockPortDSEntry OBJECT-TYPE A table entry that contains portDS information for a single clock port. | 1.3.6.1.2.1.241.1.2.8.1 | not-accessible | current | |
| ptpbaseClockPortDSDomainIndex OBJECT-TYPE This object specifies the domain number used to create a logical group of PTP devices. | 1.3.6.1.2.1.241.1.2.8.1.1 | PtpClockDomainType | not-accessible | current |
| ptpbaseClockPortDSClockTypeIndex OBJECT-TYPE This object specifies the clock type as defined in the textual convention description. | 1.3.6.1.2.1.241.1.2.8.1.2 | PtpClockType | not-accessible | current |
| ptpbaseClockPortDSClockInstanceIndex OBJECT-TYPE This object specifies the instance of the clock for this clock type in the given domain. | 1.3.6.1.2.1.241.1.2.8.1.3 | PtpClockInstanceType | not-accessible | current |
| ptpbaseClockPortDSPortNumberIndex OBJECT-TYPE This object specifies the PTP portNumber associated with this PTP port. | 1.3.6.1.2.1.241.1.2.8.1.4 | PtpClockPortNumber | not-accessible | current |
| ptpbaseClockPortDSName OBJECT-TYPE This object specifies the PTP clock portDS name. | 1.3.6.1.2.1.241.1.2.8.1.5 | DisplayString (SIZE(1..64)) | read-only | current |
| ptpbaseClockPortDSPortIdentity OBJECT-TYPE This object specifies the PTP clock port Identity. | 1.3.6.1.2.1.241.1.2.8.1.6 | OCTET STRING (SIZE(1..256)) | read-only | current |
| ptpbaseClockPortDSlogAnnouncementInterval OBJECT-TYPE This object specifies the Announce message transmission interval associated with this clock port. | 1.3.6.1.2.1.241.1.2.8.1.7 | PtpClockIntervalBase2 | read-only | current |
| ptpbaseClockPortDSAnnounceRctTimeout OBJECT-TYPE This object specifies the Announce receipt timeout associated with this clock port. | 1.3.6.1.2.1.241.1.2.8.1.8 | Integer32 | read-only | current |
| ptpbaseClockPortDSlogSyncInterval OBJECT-TYPE This object specifies the Sync message transmission interval. | 1.3.6.1.2.1.241.1.2.8.1.9 | PtpClockIntervalBase2 | read-only | current |
| ptpbaseClockPortDSMinDelayReqInterval OBJECT-TYPE This object specifies the Delay_Req message transmission interval. | 1.3.6.1.2.1.241.1.2.8.1.10 | Integer32 | read-only | current |
| ptpbaseClockPortDSPeerDelayReqInterval OBJECT-TYPE This object specifies the Pdelay_Req message transmission interval. | 1.3.6.1.2.1.241.1.2.8.1.11 | Integer32 | read-only | current |
| ptpbaseClockPortDSDelayMech OBJECT-TYPE This object specifies the delay mechanism used. If the clock is an end-to-end clock, the value is e2e; if the clock is a peer to-peer clock, the value is p2p. | 1.3.6.1.2.1.241.1.2.8.1.12 | PtpClockMechanismType | read-only | current |
| ptpbaseClockPortDSPeerMeanPathDelay OBJECT-TYPE This object specifies the peer meanPathDelay. | 1.3.6.1.2.1.241.1.2.8.1.13 | PtpClockTimeInterval | read-only | current |
| ptpbaseClockPortDSGrantDuration OBJECT-TYPE This object specifies the grant duration allocated by the master. | 1.3.6.1.2.1.241.1.2.8.1.14 | Unsigned32 | read-only | current |
| ptpbaseClockPortDSPTPVersion OBJECT-TYPE This object specifies the PTP version being used. | 1.3.6.1.2.1.241.1.2.8.1.15 | Unsigned32 | read-only | current |
| ptpbaseClockPortRunningTable OBJECT-TYPE Table of information about the clock ports running datasets for a particular domain. | 1.3.6.1.2.1.241.1.2.9 | not-accessible | current | |
| ptpbaseClockPortRunningEntry OBJECT-TYPE A table entry that contains running dataset information about a single clock port. | 1.3.6.1.2.1.241.1.2.9.1 | not-accessible | current | |
| ptpbaseClockPortRunningDomainIndex OBJECT-TYPE This object specifies the domain number used to create a logical group of PTP devices. | 1.3.6.1.2.1.241.1.2.9.1.1 | PtpClockDomainType | not-accessible | current |
| ptpbaseClockPortRunningClockTypeIndex OBJECT-TYPE This object specifies the clock type as defined in the textual convention description. | 1.3.6.1.2.1.241.1.2.9.1.2 | PtpClockType | not-accessible | current |
| ptpbaseClockPortRunningClockInstanceIndex OBJECT-TYPE This object specifies the instance of the clock for this clock type in the given domain. | 1.3.6.1.2.1.241.1.2.9.1.3 | PtpClockInstanceType | not-accessible | current |
| ptpbaseClockPortRunningPortNumberIndex OBJECT-TYPE This object specifies the PTP portNumber associated with this clock port. | 1.3.6.1.2.1.241.1.2.9.1.4 | PtpClockPortNumber | not-accessible | current |
| ptpbaseClockPortRunningName OBJECT-TYPE This object specifies the PTP clock port name. | 1.3.6.1.2.1.241.1.2.9.1.5 | DisplayString (SIZE(1..64)) | read-only | current |
| ptpbaseClockPortRunningState OBJECT-TYPE This object specifies the port state returned by PTP engine: initializing faulty disabled listening preMaster master passive uncalibrated slave | 1.3.6.1.2.1.241.1.2.9.1.6 | PtpClockPortState | read-only | current |
| ptpbaseClockPortRunningRole OBJECT-TYPE This object specifies the Clock Role. | 1.3.6.1.2.1.241.1.2.9.1.7 | PtpClockRoleType | read-only | current |
| ptpbaseClockPortRunningInterfaceIndex OBJECT-TYPE This object specifies the interface on the node being used by the PTP clock for PTP communication. | 1.3.6.1.2.1.241.1.2.9.1.8 | InterfaceIndexOrZero | read-only | current |
| ptpbaseClockPortRunningTransport OBJECT-TYPE This object specifies the transport protocol being used for PTP communication (the mapping used). | 1.3.6.1.2.1.241.1.2.9.1.9 | AutonomousType | read-only | current |
| ptpbaseClockPortRunningEncapsulationType OBJECT-TYPE This object specifies the type of encapsulation if the interface is adding extra layers (e.g., VLAN or Pseudowire encapsulation) for the PTP messages. | 1.3.6.1.2.1.241.1.2.9.1.10 | AutonomousType | read-only | current |
| ptpbaseClockPortRunningTxMode OBJECT-TYPE This object specifies the clock transmission mode as: unicast: Using unicast communication channel multicast: Using multicast communication channel multicast-mix: Using multicast-unicast communication channel | 1.3.6.1.2.1.241.1.2.9.1.11 | PtpClockTxModeType | read-only | current |
| ptpbaseClockPortRunningRxMode OBJECT-TYPE This object specifies the clock receive mode as: unicast: Using unicast communication channel multicast: Using multicast communication channel multicast-mix: Using multicast-unicast communication channel | 1.3.6.1.2.1.241.1.2.9.1.12 | PtpClockTxModeType | read-only | current |
| ptpbaseClockPortRunningPacketsReceived OBJECT-TYPE This object specifies the packets received on the clock port (cumulative). These counters are discontinuous. | 1.3.6.1.2.1.241.1.2.9.1.13 | Counter64 | read-only | current |
| ptpbaseClockPortRunningPacketsSent OBJECT-TYPE This object specifies the packets sent on the clock port (cumulative). These counters are discontinuous. | 1.3.6.1.2.1.241.1.2.9.1.14 | Counter64 | read-only | current |
| ptpbaseClockPortTransDSTable OBJECT-TYPE Table of information about the transparentClockPortDS for a particular domain. | 1.3.6.1.2.1.241.1.2.10 | not-accessible | current | |
| ptpbaseClockPortTransDSEntry OBJECT-TYPE A table entry that contains clock port transparent dataset information about a single clock port. | 1.3.6.1.2.1.241.1.2.10.1 | not-accessible | current | |
| ptpbaseClockPortTransDSDomainIndex OBJECT-TYPE This object specifies the domain number used to create a logical group of PTP devices. | 1.3.6.1.2.1.241.1.2.10.1.1 | PtpClockDomainType | not-accessible | current |
| ptpbaseClockPortTransDSInstanceIndex OBJECT-TYPE This object specifies the instance of the clock for this clock type in the given domain. | 1.3.6.1.2.1.241.1.2.10.1.2 | PtpClockInstanceType | not-accessible | current |
| ptpbaseClockPortTransDSPortNumberIndex OBJECT-TYPE This object specifies the PTP portNumber associated with this port. | 1.3.6.1.2.1.241.1.2.10.1.3 | PtpClockPortNumber | not-accessible | current |
| ptpbaseClockPortTransDSPortIdentity OBJECT-TYPE This object specifies the value of the PortIdentity attribute of the local port. | 1.3.6.1.2.1.241.1.2.10.1.4 | PtpClockIdentity | read-only | current |
| ptpbaseClockPortTransDSlogMinPdelayReqInt OBJECT-TYPE This object specifies the value of the logarithm to the base 2 of the minPdelayReqInterval. | 1.3.6.1.2.1.241.1.2.10.1.5 | PtpClockIntervalBase2 | read-only | current |
| ptpbaseClockPortTransDSFaultyFlag OBJECT-TYPE This object specifies the value TRUE if the port is faulty and FALSE if the port is operating normally. | 1.3.6.1.2.1.241.1.2.10.1.6 | TruthValue | read-only | current |
| ptpbaseClockPortTransDSPeerMeanPathDelay OBJECT-TYPE This object specifies, if the delayMechanism used is p2p, the value of the estimate of the current one-way propagation delay, i.e., <meanPathDelay> on the link attached to this port, computed using the peer delay mechanism. If the value of the delayMechanism used is e2e, then the value will be zero. | 1.3.6.1.2.1.241.1.2.10.1.7 | PtpClockTimeInterval | read-only | current |
| ptpbaseClockPortAssociateTable OBJECT-TYPE Table of information about a given port's associated ports. For a master port: multiple slave ports that have established sessions with the current master port. For a slave port: the list of masters available for a given slave port. Session information (packets, errors) to be displayed based on availability and scenario. | 1.3.6.1.2.1.241.1.2.11 | not-accessible | current | |
| ptpbaseClockPortAssociateEntry OBJECT-TYPE A table entry that contains information about a single associated port for the given clock port. | 1.3.6.1.2.1.241.1.2.11.1 | not-accessible | current | |
| ptpClockPortCurrentDomainIndex OBJECT-TYPE This object specifies the given port's domain number. | 1.3.6.1.2.1.241.1.2.11.1.1 | PtpClockDomainType | not-accessible | current |
| ptpClockPortCurrentClockTypeIndex OBJECT-TYPE This object specifies the given port's clock type. | 1.3.6.1.2.1.241.1.2.11.1.2 | PtpClockType | not-accessible | current |
| ptpClockPortCurrentClockInstanceIndex OBJECT-TYPE This object specifies the instance of the clock for this clock type in the given domain. | 1.3.6.1.2.1.241.1.2.11.1.3 | PtpClockInstanceType | not-accessible | current |
| ptpClockPortCurrentPortNumberIndex OBJECT-TYPE This object specifies the PTP portNumber for the given port. | 1.3.6.1.2.1.241.1.2.11.1.4 | PtpClockPortNumber | not-accessible | current |
| ptpbaseClockPortAssociatePortIndex OBJECT-TYPE This object specifies the associated port's serial number in the current port's context. | 1.3.6.1.2.1.241.1.2.11.1.5 | Unsigned32 (1..65535) | not-accessible | current |
| ptpbaseClockPortAssociateAddressType OBJECT-TYPE This object specifies the peer port's network address type used for PTP communication. The OCTET STRING representation of the OID of ptpbaseWellKnownTransportTypes will be used in the values contained in the OCTET STRING. | 1.3.6.1.2.1.241.1.2.11.1.6 | AutonomousType | read-only | current |
| ptpbaseClockPortAssociateAddress OBJECT-TYPE This object specifies the peer port's network address used for PTP communication. | 1.3.6.1.2.1.241.1.2.11.1.7 | PtpClockPortTransportTypeAddress | read-only | current |
| ptpbaseClockPortAssociatePacketsSent OBJECT-TYPE The number of packets sent to this peer port from the current port. These counters are discontinuous. | 1.3.6.1.2.1.241.1.2.11.1.8 | Counter64 | read-only | current |
| ptpbaseClockPortAssociatePacketsReceived OBJECT-TYPE The number of packets received from this peer port by the current port. These counters are discontinuous. | 1.3.6.1.2.1.241.1.2.11.1.9 | Counter64 | read-only | current |
| ptpbaseClockPortAssociateInErrors OBJECT-TYPE This object specifies the input errors associated with the peer port. These counters are discontinuous. | 1.3.6.1.2.1.241.1.2.11.1.10 | Counter64 | read-only | current |
| ptpbaseClockPortAssociateOutErrors OBJECT-TYPE This object specifies the output errors associated with the peer port. These counters are discontinuous. | 1.3.6.1.2.1.241.1.2.11.1.11 | Counter64 | read-only | current |
| ptpbaseWellKnownTransportTypes OBJECT-IDENTITY | 1.3.6.1.2.1.241.1.2.12 | |||
| ptpbaseTransportTypeIPversion4 OBJECT-IDENTITY IP version 4 | 1.3.6.1.2.1.241.1.2.12.1 | current | ||
| ptpbaseTransportTypeIPversion6 OBJECT-IDENTITY IP version 6 | 1.3.6.1.2.1.241.1.2.12.2 | current | ||
| ptpbaseTransportTypeEthernet OBJECT-IDENTITY Ethernet | 1.3.6.1.2.1.241.1.2.12.3 | current | ||
| ptpbaseTransportTypeDeviceNET OBJECT-IDENTITY Device NET | 1.3.6.1.2.1.241.1.2.12.4 | current | ||
| ptpbaseTransportTypeControlNET OBJECT-IDENTITY Control NET | 1.3.6.1.2.1.241.1.2.12.5 | current | ||
| ptpbaseTransportTypeIEC61158 OBJECT-IDENTITY IEC61158 | 1.3.6.1.2.1.241.1.2.12.6 | current | ||
| ptpbaseWellKnownEncapsulationTypes OBJECT-IDENTITY | 1.3.6.1.2.1.241.1.2.13 | |||
| ptpbaseEncapsulationTypeEthernet OBJECT-IDENTITY Ethernet Encapsulation type. | 1.3.6.1.2.1.241.1.2.13.1 | current | ||
| ptpbaseEncapsulationTypeVLAN OBJECT-IDENTITY VLAN Encapsulation type. | 1.3.6.1.2.1.241.1.2.13.2 | current | ||
| ptpbaseEncapsulationTypeUDPIPLSP OBJECT-IDENTITY UDP/IP over MPLS Encapsulation type. | 1.3.6.1.2.1.241.1.2.13.3 | current | ||
| ptpbaseEncapsulationTypePWUDPIPLSP OBJECT-IDENTITY UDP/IP Pseudowire over MPLS Encapsulation type. | 1.3.6.1.2.1.241.1.2.13.4 | current | ||
| ptpbaseEncapsulationTypePWEthernetLSP OBJECT-IDENTITY Ethernet Pseudowire over MPLS Encapsulation type. | 1.3.6.1.2.1.241.1.2.13.5 | current | ||
| ptpbaseMIBConformance OBJECT-IDENTITY | 1.3.6.1.2.1.241.2 | |||
| ptpbaseMIBCompliances OBJECT-IDENTITY | 1.3.6.1.2.1.241.2.1 | |||
| ptpbaseMIBGroups OBJECT-IDENTITY | 1.3.6.1.2.1.241.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| ptpbaseMIBCompliancesSystemInfo MODULE-COMPLIANCE Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide system-level information of clock devices. Such devices can only be monitored using this MIB module. The module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. | 1.3.6.1.2.1.241.2.1.1 | current |
| ptpbaseMIBCompliancesClockInfo MODULE-COMPLIANCE Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide clock-related information. Such devices can only be monitored using this MIB module. The module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. | 1.3.6.1.2.1.241.2.1.2 | current |
| ptpbaseMIBCompliancesClockPortInfo MODULE-COMPLIANCE Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide clock-port-related information. Such devices can only be monitored using this MIB module. The module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. | 1.3.6.1.2.1.241.2.1.3 | current |
| ptpbaseMIBCompliancesTransparentClockInfo MODULE-COMPLIANCE Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide transparent-clock-related information. Such devices can only be monitored using this MIB module. The module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. | 1.3.6.1.2.1.241.2.1.4 | current |
| ptpbaseMIBSystemInfoGroup OBJECT-GROUP Group that aggregates objects describing system-wide information | 1.3.6.1.2.1.241.2.2.1 | current |
| ptpbaseMIBClockCurrentDSGroup OBJECT-GROUP Group that aggregates objects describing PTP currentDS information | 1.3.6.1.2.1.241.2.2.2 | current |
| ptpbaseMIBClockParentDSGroup OBJECT-GROUP Group that aggregates objects describing PTP parentDS information | 1.3.6.1.2.1.241.2.2.3 | current |
| ptpbaseMIBClockDefaultDSGroup OBJECT-GROUP Group that aggregates objects describing PTP defaultDS information | 1.3.6.1.2.1.241.2.2.4 | current |
| ptpbaseMIBClockRunningGroup OBJECT-GROUP Group that aggregates objects describing PTP running state information | 1.3.6.1.2.1.241.2.2.5 | current |
| ptpbaseMIBClockTimepropertiesGroup OBJECT-GROUP Group that aggregates objects describing PTP Time Properties information | 1.3.6.1.2.1.241.2.2.6 | current |
| ptpbaseMIBClockTranparentDSGroup OBJECT-GROUP Group that aggregates objects describing PTP transparentClockDefaultDS information | 1.3.6.1.2.1.241.2.2.7 | current |
| ptpbaseMIBClockPortGroup OBJECT-GROUP Group that aggregates objects describing information for a given PTP Port | 1.3.6.1.2.1.241.2.2.8 | current |
| ptpbaseMIBClockPortDSGroup OBJECT-GROUP Group that aggregates objects describing PTP portDS information | 1.3.6.1.2.1.241.2.2.9 | current |
| ptpbaseMIBClockPortRunningGroup OBJECT-GROUP Group that aggregates objects describing PTP running interface information | 1.3.6.1.2.1.241.2.2.10 | current |
| ptpbaseMIBClockPortTransDSGroup OBJECT-GROUP Group that aggregates objects describing PTP transparentClockPortDS information | 1.3.6.1.2.1.241.2.2.11 | current |
| ptpbaseMIBClockPortAssociateGroup OBJECT-GROUP Group that aggregates objects describing information on peer PTP ports for a given PTP clock port | 1.3.6.1.2.1.241.2.2.12 | current |