MIBs Depot

PRIVATE-FEL2Mod-SW24-MIB

Registered at
1.3.6.1.4.1.5205.2.19
Last updated
2006-07-03 00:00
Organization
xxx Tech Corp.
Namespace
signamax
Source file
PRIVATE-FEL2Mod-SW24-MIB
Digest
sha256:2a857df2b58e38e2a285b31196d4edd92b32d6cf5148681ff7f06a3e99a999ac

Description

The MIB module is for xxx Tech.

Contact

xxx

Imports

FromSymbols
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
PRIVATE-FEL2Mod-SW24-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
switch
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2
feL2ModSW24ProductID
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19
feL2ModSW24Produces
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1
feL2ModSW24System
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.1
feL2ModSW24CommonSys
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.1.1
feL2ModSW24Reboot
OBJECT-TYPE
Reboot the system. Get this OID always return zero. 0 - do nothing 1 - Reboot without saving start 2 - Reboot with saving start
1.3.6.1.4.1.5205.2.19.1.1.1.1INTEGER (0 | 1 | 2)read-writecurrent
feL2ModSW24BiosVsersion
OBJECT-TYPE
Get the BIOS version of the system.
1.3.6.1.4.1.5205.2.19.1.1.1.2DisplayStringread-onlycurrent
feL2ModSW24FirmwareVersion
OBJECT-TYPE
Get the firmware version of the system.
1.3.6.1.4.1.5205.2.19.1.1.1.3DisplayStringread-onlycurrent
feL2ModSW24HardwareVersion
OBJECT-TYPE
Get the hardware version of the system.
1.3.6.1.4.1.5205.2.19.1.1.1.4DisplayStringread-onlycurrent
feL2ModSW24MechanicalVersion
OBJECT-TYPE
Get the mechanical version of the system.
1.3.6.1.4.1.5205.2.19.1.1.1.5DisplayStringread-onlycurrent
feL2ModSW24SerialNumber
OBJECT-TYPE
Get the Serial number of the system.
1.3.6.1.4.1.5205.2.19.1.1.1.6DisplayStringread-onlycurrent
feL2ModSW24HostMacAddress
OBJECT-TYPE
Get the MAC address of the system.
1.3.6.1.4.1.5205.2.19.1.1.1.7DisplayStringread-onlycurrent
feL2ModSW24DevicePort
OBJECT-TYPE
Get the quantity of ports that this system owns now.
1.3.6.1.4.1.5205.2.19.1.1.1.8DisplayStringread-onlycurrent
feL2ModSW24RamSize
OBJECT-TYPE
Get the RAM size of the system.
1.3.6.1.4.1.5205.2.19.1.1.1.9DisplayStringread-onlycurrent
feL2ModSW24FlashSize
OBJECT-TYPE
Get the flash size of the system.
1.3.6.1.4.1.5205.2.19.1.1.1.10DisplayStringread-onlycurrent
feL2ModSW24IP
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.1.2
feL2ModSW24DhcpSetting
OBJECT-TYPE
Get/Set DHCP status of the system. 0 - DHCP disable 1 - DHCP enable
1.3.6.1.4.1.5205.2.19.1.1.2.1INTEGER (0 | 1)read-writecurrent
feL2ModSW24IPAddress
OBJECT-TYPE
Get/Set the IP address of the system. You can't set this OID if DHCP status is enabled.
1.3.6.1.4.1.5205.2.19.1.1.2.2IpAddressread-writecurrent
feL2ModSW24NetMask
OBJECT-TYPE
Get/Set the subnet mask of the system. You can't set this OID if DHCP status is enabled.
1.3.6.1.4.1.5205.2.19.1.1.2.3IpAddressread-writecurrent
feL2ModSW24DefaultGateway
OBJECT-TYPE
Get/Set the default gateway of the system. You can't set this OID if DHCP status is enabled.
1.3.6.1.4.1.5205.2.19.1.1.2.4IpAddressread-writecurrent
feL2ModSW24DnsSetting
OBJECT-TYPE
Get/Set the source of DNS server. You can't set this OID if DHCP status is disabled. 0 - manual, the DNS server is from manual setting 1 - auto, the DNS server is assigned by DHCP server.
1.3.6.1.4.1.5205.2.19.1.1.2.5INTEGER (0 | 1)read-writecurrent
feL2ModSW24DnsServer
OBJECT-TYPE
Get/Set the DNS server of the system.
1.3.6.1.4.1.5205.2.19.1.1.2.6IpAddressread-writecurrent
feL2ModSW24Time
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.1.3
feL2ModSW24SystemCurrentTime
OBJECT-TYPE
Get the current time of the system.
1.3.6.1.4.1.5205.2.19.1.1.3.1DisplayStringread-onlycurrent
feL2ModSW24ManualTimeSetting
OBJECT-TYPE
Get/Set the system time of the device. The input format is 'Year/Month/Day/Hour/Minute/Second'. ex: 2004/1/1/12/34/25 means 2004/1/1 - 12:24:25 . The value range: Year : 2000 - 2036, Mouth : 1 - 12, Day : 1 - 31, Hour : 0 - 23, Minute : 0 - 59, Sec : 0 - 59.
1.3.6.1.4.1.5205.2.19.1.1.3.2DisplayStringread-writecurrent
feL2ModSW24NTPServer
OBJECT-TYPE
Get/Set the NTP Time Server. You can use the IP address or domain name.
1.3.6.1.4.1.5205.2.19.1.1.3.3DisplayStringread-writecurrent
feL2ModSW24NTPTimeZone
OBJECT-TYPE
Get/Set the NTP Time Zone. The value range is between -12 and 13 -12 - GMT -12:00, -11 - GMT -11:00, -10 - GMT -10:00, -9 - GMT -09:00, -8 - GMT -08:00, -7 - GMT -07:00, -6 - GMT -06:00, -5 - GMT -05:00, -4 - GMT -04:00, -3 - GMT -03:00, -2 - GMT -02:00, -1 - GMT -01:00, 0 - GMT +00:00, 1 - GMT +01:00, 2 - GMT +02:00, 3 - GMT +03:00, 4 - GMT +04:00, 5 - GMT +05:00, 6 - GMT +06:00, 7 - GMT +07:00, 8 - GMT +08:00, 9 - GMT +09:00, 10 - GMT +10:00, 11 - GMT +11:00, 12 - GMT +12:00, 13 - GMT +13:00.
1.3.6.1.4.1.5205.2.19.1.1.3.4INTEGER (-12..13)read-writecurrent
feL2ModSW24NTPTimeSync
OBJECT-TYPE
Sync time from NTP Server. Get this OID always return zero. Set the Time Server and Time Zone before doing time sync. Notice that time server must be correct! The value range (0|1): 1 - sync. 0 - do nothing.
1.3.6.1.4.1.5205.2.19.1.1.3.5INTEGER (0 | 1)read-writecurrent
feL2ModSW24DaylightSavingTime
OBJECT-TYPE
Get/Set the daylight saving time. The value range is between -5 and 5. (Unit: hour)
1.3.6.1.4.1.5205.2.19.1.1.3.6INTEGER (-5..5)read-writecurrent
feL2ModSW24DaylightStartTime
OBJECT-TYPE
Get/Set the Start time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. example: month/day/hour 10/01/00 month: 01~12, day: 01~31, hour: 00~23 .
1.3.6.1.4.1.5205.2.19.1.1.3.7DisplayStringread-writecurrent
feL2ModSW24DaylightEndTime
OBJECT-TYPE
Get/Set the End time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. example: month/day/hour 04/01/00 month: 01~12, day: 01~31, hour: 00~23 .
1.3.6.1.4.1.5205.2.19.1.1.3.8DisplayStringread-writecurrent
feL2ModSW24Account
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.1.4
feL2ModSW24AccountNumber
OBJECT-TYPE
Get the current account number(s) of the system.
1.3.6.1.4.1.5205.2.19.1.1.4.1INTEGER (1..5)read-onlycurrent
feL2ModSW24AccountTable
OBJECT-TYPE
This is a list of FEL2ModSW24AccountEntry. The numbers of entries are given by the value of feL2ModSW24AccountNumber.
1.3.6.1.4.1.5205.2.19.1.1.4.2not-accessiblecurrent
feL2ModSW24AccountEntry
OBJECT-TYPE
This is the Entry(s) for account information.
1.3.6.1.4.1.5205.2.19.1.1.4.2.1not-accessiblecurrent
feL2ModSW24AccountIndex
OBJECT-TYPE
This is the index of the account entry.
1.3.6.1.4.1.5205.2.19.1.1.4.2.1.1INTEGER (1..5)read-onlycurrent
feL2ModSW24AccountAuthorization
OBJECT-TYPE
This is the authorization of the account entry.
1.3.6.1.4.1.5205.2.19.1.1.4.2.1.2DisplayStringread-onlycurrent
feL2ModSW24AccountName
OBJECT-TYPE
This is the username of the account entry.
1.3.6.1.4.1.5205.2.19.1.1.4.2.1.3DisplayStringread-writecurrent
feL2ModSW24AccountPassword
OBJECT-TYPE
This is the password of the account entry. The return value is always '********'.
1.3.6.1.4.1.5205.2.19.1.1.4.2.1.4DisplayStringread-writecurrent
feL2ModSW24AccountAddName
OBJECT-TYPE
This is the account name for adding operation.
1.3.6.1.4.1.5205.2.19.1.1.4.3DisplayStringread-writecurrent
feL2ModSW24AccountAddPassword
OBJECT-TYPE
This is the account password for adding operation. The return value is always '********'.
1.3.6.1.4.1.5205.2.19.1.1.4.4DisplayStringread-writecurrent
feL2ModSW24DoAccountAdd
OBJECT-TYPE
Add account name. OID feL2ModSW24AccountAddName and feL2ModSW24AccountAddPassword must be filled first. Get this OID always return zero. 1 - add account. 0 - do nothing.
1.3.6.1.4.1.5205.2.19.1.1.4.5INTEGER (0 | 1)read-writecurrent
feL2ModSW24AccountDel
OBJECT-TYPE
Delete account. The value is valid feL2ModSW24AccountIndex(Can't delete administrator).
1.3.6.1.4.1.5205.2.19.1.1.4.6INTEGER (2..5)read-writecurrent
feL2ModSW24Snmp
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.2
feL2ModSW24GetCommunity
OBJECT-TYPE
Get/Set the get-community of the SNMP.
1.3.6.1.4.1.5205.2.19.1.2.1DisplayStringread-writecurrent
feL2ModSW24SetCommunity
OBJECT-TYPE
Get/Set the set-community of the SNMP.
1.3.6.1.4.1.5205.2.19.1.2.2DisplayStringread-writecurrent
feL2ModSW24TrapHostNumber
OBJECT-TYPE
Get the number of trap hosts.
1.3.6.1.4.1.5205.2.19.1.2.3INTEGER (1..6)read-onlycurrent
feL2ModSW24TrapHostTable
OBJECT-TYPE
A list of trap host entry. The numbers of entries are given by the value of feL2ModSW24TrapHostNumber.
1.3.6.1.4.1.5205.2.19.1.2.4not-accessiblecurrent
feL2ModSW24TrapHostEntry
OBJECT-TYPE
This is the entry information for trap host.
1.3.6.1.4.1.5205.2.19.1.2.4.1not-accessiblecurrent
feL2ModSW24TrapHostIndex
OBJECT-TYPE
The index of the trap host entry.
1.3.6.1.4.1.5205.2.19.1.2.4.1.1INTEGER (1..6)read-onlycurrent
feL2ModSW24TrapHostIP
OBJECT-TYPE
This is the IP of the trap host.
1.3.6.1.4.1.5205.2.19.1.2.4.1.2IpAddressread-writecurrent
feL2ModSW24TrapHostPort
OBJECT-TYPE
This is the receiving-port number of the trap host.
1.3.6.1.4.1.5205.2.19.1.2.4.1.3INTEGER (1..65535)read-writecurrent
feL2ModSW24TrapHostCommunity
OBJECT-TYPE
The community name for the trap PDU.
1.3.6.1.4.1.5205.2.19.1.2.4.1.4DisplayStringread-writecurrent
feL2ModSW24Alarm
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.3
feL2ModSW24Event
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.3.1
feL2ModSW24EventNumber
OBJECT-TYPE
Get the total number of alarm events.
1.3.6.1.4.1.5205.2.19.1.3.1.1INTEGER (1..2147483647)read-onlycurrent
feL2ModSW24EventTable
OBJECT-TYPE
A list of alarm event entry. The numbers of entries are given by the value of feL2ModSW24EventNumber.
1.3.6.1.4.1.5205.2.19.1.3.1.2not-accessiblecurrent
feL2ModSW24EventEntry
OBJECT-TYPE
This is the entry information for alarm event.
1.3.6.1.4.1.5205.2.19.1.3.1.2.1not-accessiblecurrent
feL2ModSW24EventIndex
OBJECT-TYPE
This is the index of the alarm event entry.
1.3.6.1.4.1.5205.2.19.1.3.1.2.1.1INTEGER (1..2147483647)read-onlycurrent
feL2ModSW24EventName
OBJECT-TYPE
This is the alarm event name.
1.3.6.1.4.1.5205.2.19.1.3.1.2.1.2DisplayStringread-onlycurrent
feL2ModSW24EventSendEmail
OBJECT-TYPE
Send email when alarm event is triggered.
1.3.6.1.4.1.5205.2.19.1.3.1.2.1.3INTEGER (0 | 1)read-writecurrent
feL2ModSW24EventSendSMS
OBJECT-TYPE
Send SMS when alarm event is triggered.
1.3.6.1.4.1.5205.2.19.1.3.1.2.1.4INTEGER (0 | 1)read-writecurrent
feL2ModSW24EventSendTrap
OBJECT-TYPE
Send trap when alarm event is triggered.
1.3.6.1.4.1.5205.2.19.1.3.1.2.1.5INTEGER (0 | 1)read-writecurrent
feL2ModSW24Email
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.3.2
feL2ModSW24EmailServer
OBJECT-TYPE
This is the SMTP server for alarm event.
1.3.6.1.4.1.5205.2.19.1.3.2.1DisplayStringread-writecurrent
feL2ModSW24EmailUsername
OBJECT-TYPE
This is the Username of SMTP server.
1.3.6.1.4.1.5205.2.19.1.3.2.2DisplayStringread-writecurrent
feL2ModSW24EmailPassword
OBJECT-TYPE
This is the User Password of SMTP server.
1.3.6.1.4.1.5205.2.19.1.3.2.3DisplayStringread-writecurrent
feL2ModSW24EmailUserNumber
OBJECT-TYPE
The number of the email users that you want to send the alarm notification.
1.3.6.1.4.1.5205.2.19.1.3.2.4INTEGER (1..6)read-onlycurrent
feL2ModSW24EmailUserTable
OBJECT-TYPE
This is a list of email user entry. The numbers of entries are given by the value of feL2ModSW24EmailUserNumber.
1.3.6.1.4.1.5205.2.19.1.3.2.5not-accessiblecurrent
feL2ModSW24EmailUserEntry
OBJECT-TYPE
This is the Entry information for email user entry.
1.3.6.1.4.1.5205.2.19.1.3.2.5.1not-accessiblecurrent
feL2ModSW24EmailUserIndex
OBJECT-TYPE
This is the index of the email user entry.
1.3.6.1.4.1.5205.2.19.1.3.2.5.1.1INTEGER (1..6)read-onlycurrent
feL2ModSW24EmailUserAddress
OBJECT-TYPE
This is the email address of the email user entry.
1.3.6.1.4.1.5205.2.19.1.3.2.5.1.2DisplayStringread-writecurrent
feL2ModSW24SMS
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.3.3
feL2ModSW24SMSServer
OBJECT-TYPE
This is the SMS server for alarm event.
1.3.6.1.4.1.5205.2.19.1.3.3.1DisplayStringread-writecurrent
feL2ModSW24SMSUsername
OBJECT-TYPE
This is the Username of SMS server.
1.3.6.1.4.1.5205.2.19.1.3.3.2DisplayStringread-writecurrent
feL2ModSW24SMSPassword
OBJECT-TYPE
This is the Password of SMS server.
1.3.6.1.4.1.5205.2.19.1.3.3.3DisplayStringread-writecurrent
feL2ModSW24SMSUserNumber
OBJECT-TYPE
The number of the SMS users that you want to send the alarm notification.
1.3.6.1.4.1.5205.2.19.1.3.3.4INTEGER (1..6)read-onlycurrent
feL2ModSW24SMSUserTable
OBJECT-TYPE
This is a list of SMS user entry. The numbers of entries are given by the value of feL2ModSW24SMSUserNumber.
1.3.6.1.4.1.5205.2.19.1.3.3.5not-accessiblecurrent
feL2ModSW24SMSUserEntry
OBJECT-TYPE
This is the Entry information for SMS user entry.
1.3.6.1.4.1.5205.2.19.1.3.3.5.1not-accessiblecurrent
feL2ModSW24SMSUserIndex
OBJECT-TYPE
This is the index of the SMS user entry.
1.3.6.1.4.1.5205.2.19.1.3.3.5.1.1INTEGER (1..6)read-onlycurrent
feL2ModSW24SMSUserMobilePhone
OBJECT-TYPE
The SMS phone number of the SMS user entry.
1.3.6.1.4.1.5205.2.19.1.3.3.5.1.2DisplayStringread-writecurrent
feL2ModSW24Tftp
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.4
feL2ModSW24TftpServer
OBJECT-TYPE
Get/Set the tftp server.
1.3.6.1.4.1.5205.2.19.1.4.1IpAddressread-writecurrent
feL2ModSW24Configuration
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.5
feL2ModSW24SaveRestore
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.5.1
feL2ModSW24SaveStart
OBJECT-TYPE
Save current configuration into flash memory (Save as Start Configuration). Get this OID always return zero. 1 - save. 0 - do nothing.
1.3.6.1.4.1.5205.2.19.1.5.1.1INTEGER (0 | 1)read-writecurrent
feL2ModSW24SaveUser
OBJECT-TYPE
Save current configuration into flash memory (Save as User Configuration). Get this OID always return zero. 1 - save. 0 - do nothing.
1.3.6.1.4.1.5205.2.19.1.5.1.2INTEGER (0 | 1)read-writecurrent
feL2ModSW24RestoreDefault
OBJECT-TYPE
Restore factory default configuration. Get this OID always return zero. 2 - restore default included default ip address. 1 - restore default without changing current ip address. 0 - do nothing.
1.3.6.1.4.1.5205.2.19.1.5.1.3INTEGER (0 | 1 | 2)read-writecurrent
feL2ModSW24RestoreUser
OBJECT-TYPE
Restore user configuration. Get this OID always return zero. 1 - restore. 0 - do nothing.
1.3.6.1.4.1.5205.2.19.1.5.1.4INTEGER (0 | 1)read-writecurrent
feL2ModSW24ConfigFile
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.5.2
feL2ModSW24ExportConfigName
OBJECT-TYPE
Get/Set the export file path and name.
1.3.6.1.4.1.5205.2.19.1.5.2.1DisplayStringread-writecurrent
feL2ModSW24DoExportConfig
OBJECT-TYPE
Do export-config. Get this oid always return zero. 1 - export start section. 2 - export user-conf section.
1.3.6.1.4.1.5205.2.19.1.5.2.2INTEGER (1 | 2)read-writecurrent
feL2ModSW24ImportConfigName
OBJECT-TYPE
Get/Set the import file path and name.
1.3.6.1.4.1.5205.2.19.1.5.2.3DisplayStringread-writecurrent
feL2ModSW24DoImportConfig
OBJECT-TYPE
Do import-config. Get this OID always return zero. 1 - import start section. 2 - import user-conf section.
1.3.6.1.4.1.5205.2.19.1.5.2.4INTEGER (1 | 2)read-writecurrent
feL2ModSW24Diagnostic
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.6
feL2ModSW24EEPROMTest
OBJECT-TYPE
EEPROM access test.
1.3.6.1.4.1.5205.2.19.1.6.1DisplayStringread-onlycurrent
feL2ModSW24UartTest
OBJECT-TYPE
UART access test.
1.3.6.1.4.1.5205.2.19.1.6.2DisplayStringread-onlycurrent
feL2ModSW24DramTest
OBJECT-TYPE
DRAM access test.
1.3.6.1.4.1.5205.2.19.1.6.3DisplayStringread-onlycurrent
feL2ModSW24FlashTest
OBJECT-TYPE
Flash memory access test.
1.3.6.1.4.1.5205.2.19.1.6.4DisplayStringread-onlycurrent
feL2ModSW24InternalLoopbackTest
OBJECT-TYPE
Internal loopback test.
1.3.6.1.4.1.5205.2.19.1.6.5DisplayStringread-onlycurrent
feL2ModSW24ExternalLoopbackTest
OBJECT-TYPE
External loopback test.
1.3.6.1.4.1.5205.2.19.1.6.6DisplayStringread-onlycurrent
feL2ModSW24PingTest
OBJECT-TYPE
Set the host address that you want to ping and the system will return the test result.
1.3.6.1.4.1.5205.2.19.1.6.7DisplayStringread-writecurrent
feL2ModSW24Log
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.7
feL2ModSW24ClearLog
OBJECT-TYPE
Clear system log. Get this OID always return zero. 1 - clear log. 0 - do nothing.
1.3.6.1.4.1.5205.2.19.1.7.1INTEGER (0 | 1)read-writecurrent
feL2ModSW24UploadLog
OBJECT-TYPE
Upload current system log. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return zero. 1 - upload log 0 - do nothing.
1.3.6.1.4.1.5205.2.19.1.7.2INTEGER (0 | 1)read-writecurrent
feL2ModSW24AutoUploadLogState
OBJECT-TYPE
Enable auto-upload log function. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return zero. 1 - Enable auto-upload 0 - do nothing.
1.3.6.1.4.1.5205.2.19.1.7.3INTEGER (0 | 1)read-writecurrent
feL2ModSW24LogNumber
OBJECT-TYPE
Get the number of current system log.
1.3.6.1.4.1.5205.2.19.1.7.4INTEGER (0..120)read-onlycurrent
feL2ModSW24LogTable
OBJECT-TYPE
This is a list of log entry. The numbers of entries are given by the value of feL2ModSW24LogNumber.
1.3.6.1.4.1.5205.2.19.1.7.5not-accessiblecurrent
feL2ModSW24LogEntry
OBJECT-TYPE
This is the Entry information for system log.
1.3.6.1.4.1.5205.2.19.1.7.5.1not-accessiblecurrent
feL2ModSW24LogIndex
OBJECT-TYPE
This is the index of the log entry.
1.3.6.1.4.1.5205.2.19.1.7.5.1.1INTEGER (1..120)read-onlycurrent
feL2ModSW24LogEvent
OBJECT-TYPE
This is the detail information of the log entry.
1.3.6.1.4.1.5205.2.19.1.7.5.1.2DisplayStringread-onlycurrent
feL2ModSW24Firmware
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.8
feL2ModSW24FirmwareFileName
OBJECT-TYPE
Get/Set the path and filename for firmware upgrading.
1.3.6.1.4.1.5205.2.19.1.8.1DisplayStringread-writecurrent
feL2ModSW24DoFirmwareUpgrade
OBJECT-TYPE
Do firmware upgrade. Get this OID always return zero. 1 - do firmware upgrade. 0 - do nothing.
1.3.6.1.4.1.5205.2.19.1.8.2INTEGER (0 | 1)read-writecurrent
feL2ModSW24Port
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.9
feL2ModSW24PortStatus
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.9.1
feL2ModSW24PortStatusNumber
OBJECT-TYPE
Get the number of port.
1.3.6.1.4.1.5205.2.19.1.9.1.1INTEGER (1..2147483647)read-onlycurrent
feL2ModSW24PortStatusTable
OBJECT-TYPE
This is a list of port status entry. The numbers of entries are given by the value of feL2ModSW24PortStatusNumber.
1.3.6.1.4.1.5205.2.19.1.9.1.2not-accessiblecurrent
feL2ModSW24PortStatusEntry
OBJECT-TYPE
This is the entry(s) for port status information.
1.3.6.1.4.1.5205.2.19.1.9.1.2.1not-accessiblecurrent
feL2ModSW24PortStatusIndex
OBJECT-TYPE
This is the index of the port status entry.
1.3.6.1.4.1.5205.2.19.1.9.1.2.1.1INTEGER (1..2147483647)read-onlycurrent
feL2ModSW24PortStatusMedia
OBJECT-TYPE
The port media type of the port status entry.
1.3.6.1.4.1.5205.2.19.1.9.1.2.1.2DisplayStringread-onlycurrent
feL2ModSW24PortStatusPortState
OBJECT-TYPE
This is the port state of the port status entry.
1.3.6.1.4.1.5205.2.19.1.9.1.2.1.4DisplayStringread-onlycurrent
feL2ModSW24PortStatusAutoNego
OBJECT-TYPE
This is the auto negotiation of the port status entry.
1.3.6.1.4.1.5205.2.19.1.9.1.2.1.5DisplayStringread-onlycurrent
feL2ModSW24PortStatusSpdDpx
OBJECT-TYPE
This is the speed/duplex of the port status entry.
1.3.6.1.4.1.5205.2.19.1.9.1.2.1.6DisplayStringread-onlycurrent
feL2ModSW24PortStatusFlwCtrl
OBJECT-TYPE
This is the flow control of the port status entry.
1.3.6.1.4.1.5205.2.19.1.9.1.2.1.7DisplayStringread-onlycurrent
feL2ModSW24PortStatuDescription
OBJECT-TYPE
The description of port.
1.3.6.1.4.1.5205.2.19.1.9.1.2.1.8DisplayStringread-onlycurrent
feL2ModSW24PortConf
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.9.2
feL2ModSW24PortConfNumber
OBJECT-TYPE
Get the number of port configuration.
1.3.6.1.4.1.5205.2.19.1.9.2.1INTEGER (1..2147483647)read-onlycurrent
feL2ModSW24PortConfTable
OBJECT-TYPE
This is a list of port configuration entry. The numbers of entries are given by the value of feL2ModSW24PortConfNumber.
1.3.6.1.4.1.5205.2.19.1.9.2.2not-accessiblecurrent
feL2ModSW24PortConfEntry
OBJECT-TYPE
This is the Entry(s) for port configuration information.
1.3.6.1.4.1.5205.2.19.1.9.2.2.1not-accessiblecurrent
feL2ModSW24PortConfIndex
OBJECT-TYPE
This is the index of the port configuration entry.
1.3.6.1.4.1.5205.2.19.1.9.2.2.1.1INTEGER (1..2147483647)read-onlycurrent
feL2ModSW24PortConfPortState
OBJECT-TYPE
This is the port state of the port configuration entry. 0 - disabled. 1 - enabled.
1.3.6.1.4.1.5205.2.19.1.9.2.2.1.2INTEGER (0 | 1)read-writecurrent
feL2ModSW24PortConfSpdDpx
OBJECT-TYPE
This is the speed/duplex of the port configuration entry. 0 - auto. 1 - 10M/Half. 2 - 10M/Full. 3 - 100M/Half. 4 - 100M/Full. 5 - 1G/Full.
1.3.6.1.4.1.5205.2.19.1.9.2.2.1.3INTEGER (0..5)read-writecurrent
feL2ModSW24PortConfFlwCtrl
OBJECT-TYPE
This is the flow control of the port configuration entry. 0 - disabled. 1 - enabled.
1.3.6.1.4.1.5205.2.19.1.9.2.2.1.4INTEGER (0 | 1)read-writecurrent
feL2ModSW24PortConfDescription
OBJECT-TYPE
The description of port.
1.3.6.1.4.1.5205.2.19.1.9.2.2.1.5DisplayStringread-writecurrent
feL2ModSW24Mirror
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.10
feL2ModSW24MirrorMode
OBJECT-TYPE
Get/Set the Mirror mode. 0 - disabled. 1 - rx enable.
1.3.6.1.4.1.5205.2.19.1.10.1INTEGER (0 | 1)read-writecurrent
feL2ModSW24MirroringPort
OBJECT-TYPE
Get/Set the mirroring port. The port range is from 1 to 24.
1.3.6.1.4.1.5205.2.19.1.10.2INTEGER (1..2147483647)read-writecurrent
feL2ModSW24MirroredPorts
OBJECT-TYPE
Get/Set the monitored ports. The port range is from 1 to 24, and the syntax is 1,5-7.
1.3.6.1.4.1.5205.2.19.1.10.3DisplayStringread-writecurrent
feL2ModSW24MaxPktLen
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.11
feL2ModSW24MaxPktLen1
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.11.1
feL2ModSW24MaxPktLenPortNumber
OBJECT-TYPE
Get the number of Max. packet length.
1.3.6.1.4.1.5205.2.19.1.11.1.1INTEGER (1..2147483647)read-onlycurrent
feL2ModSW24MaxPktLenConfTable
OBJECT-TYPE
This is a list of Max. packet length entry. The numbers of entries are given by the value of feL2ModSW24MaxPktLenPortNumber.
1.3.6.1.4.1.5205.2.19.1.11.1.2not-accessiblecurrent
feL2ModSW24MaxPktLenConfEntry
OBJECT-TYPE
Entry(s) for Max. packet length information.
1.3.6.1.4.1.5205.2.19.1.11.1.2.1not-accessiblecurrent
feL2ModSW24MaxPktLenConfIndex
OBJECT-TYPE
This is the index of the Max. packet length entry.
1.3.6.1.4.1.5205.2.19.1.11.1.2.1.1INTEGER (1..2147483647)read-onlycurrent
feL2ModSW24MaxPktLenConfSetting
OBJECT-TYPE
Get/Set the Max. packet length. The Max. packet length is 1518,1532,or 9216.
1.3.6.1.4.1.5205.2.19.1.11.1.2.1.2INTEGER (1518 | 1532 | 9216)read-writecurrent
feL2ModSW24Bandwidth
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.12
feL2ModSW24Bandwidth1
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.12.1
feL2ModSW24BandwidthPortNumber
OBJECT-TYPE
Get the number of bandwidth management configuration.
1.3.6.1.4.1.5205.2.19.1.12.1.1INTEGER (1..2147483647)read-onlycurrent
feL2ModSW24BandwidthConfTable
OBJECT-TYPE
A list of bandwidth management configuration entry. The numbers of entries are given by the value of feL2ModSW24BandwidthPortNumber.
1.3.6.1.4.1.5205.2.19.1.12.1.2not-accessiblecurrent
feL2ModSW24BandwidthConfEntry
OBJECT-TYPE
This is the Entry(s) for bandwidth management configuration information.
1.3.6.1.4.1.5205.2.19.1.12.1.2.1not-accessiblecurrent
feL2ModSW24BandwidthConfIndex
OBJECT-TYPE
This is the index of the bandwidth management configuration entry.
1.3.6.1.4.1.5205.2.19.1.12.1.2.1.1INTEGER (1..2147483647)read-onlycurrent
feL2ModSW24BandwidthConfIngressState
OBJECT-TYPE
The ingress state of the bandwidth management configures entry. 0 - disabled. 1 - enabled.
1.3.6.1.4.1.5205.2.19.1.12.1.2.1.2INTEGER (0 | 1)read-writecurrent
feL2ModSW24BandwidthConfIngressBW
OBJECT-TYPE
Get/Set the ingress rate of the bandwidth management configuration. The ingress rate is from 0 to 1000.
1.3.6.1.4.1.5205.2.19.1.12.1.2.1.3INTEGER (0..1000)read-writecurrent
feL2ModSW24BandwidthConfStormState
OBJECT-TYPE
The storm state of the bandwidth management configuration entry. 0 - disabled. 1 - enabled.
1.3.6.1.4.1.5205.2.19.1.12.1.2.1.4INTEGER (0 | 1)read-writecurrent
feL2ModSW24BandwidthConfStormBW
OBJECT-TYPE
Get/Set the storm rate of the bandwidth management configuration. The storm rate is from 0 to 1000.
1.3.6.1.4.1.5205.2.19.1.12.1.2.1.5INTEGER (0..1000)read-writecurrent
feL2ModSW24BandwidthConfEgressState
OBJECT-TYPE
The egress state of the bandwidth management configuration entry. 0 - disabled. 1 - enabled.
1.3.6.1.4.1.5205.2.19.1.12.1.2.1.6INTEGER (0 | 1)read-writecurrent
feL2ModSW24BandwidthConfEgressBW
OBJECT-TYPE
Get/Set the egress rate of the bandwidth management configuration. The egress rate is from 0 to 1000.
1.3.6.1.4.1.5205.2.19.1.12.1.2.1.7INTEGER (0..1000)read-writecurrent
feL2ModSW24LoopDetectedConf
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.13
feL2ModSW24LoopDetectedNumber
OBJECT-TYPE
Get the number of loop detected entry.
1.3.6.1.4.1.5205.2.19.1.13.1INTEGER (1..2147483647)read-onlycurrent
feL2ModSW24LoopDetectedTable
OBJECT-TYPE
A list of loop detected entry. The numbers of entries are given by the value of feL2ModSW24LoopDetectedNumber.
1.3.6.1.4.1.5205.2.19.1.13.2not-accessiblecurrent
feL2ModSW24LoopDetectedEntry
OBJECT-TYPE
Entry(s) for loop detected information.
1.3.6.1.4.1.5205.2.19.1.13.2.1not-accessiblecurrent
feL2ModSW24LoopDetectedfIndex
OBJECT-TYPE
The index of the loop detected entry.
1.3.6.1.4.1.5205.2.19.1.13.2.1.1INTEGER (1..2147483647)read-onlycurrent
feL2ModSW24LoopDetectedStateEbl
OBJECT-TYPE
The state of the loop detected entry. 0 - disabled. 1 - enabled.
1.3.6.1.4.1.5205.2.19.1.13.2.1.2INTEGER (0 | 1)read-writecurrent
feL2ModSW24LoopDetectedCurrentStatus
OBJECT-TYPE
The current status of the loop detected port. 0 - unlocked 1 - locked due to the loop condition
1.3.6.1.4.1.5205.2.19.1.13.2.1.3INTEGER (0 | 1)read-onlycurrent
feL2ModSW24LoopDetectedResumed
OBJECT-TYPE
Unlock the port which is locked due to loop condition. Get this OID always return zero. 1 - unlock the port, 0 - do nothing.
1.3.6.1.4.1.5205.2.19.1.13.2.1.4INTEGER (0 | 1)read-writecurrent
feL2ModSW24LoopDetectedAction
OBJECT-TYPE
Set the corresponding action while loop is detected. 1 - lock the loop port, 0 - do nothing.
1.3.6.1.4.1.5205.2.19.1.13.3INTEGER (0 | 1)read-writecurrent
feL2ModSW24SFPInfo
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.14
feL2ModSW24SFPInfoNumber
OBJECT-TYPE
Get the number of sfp info entry.
1.3.6.1.4.1.5205.2.19.1.14.1INTEGER (1..2147483647)read-onlycurrent
feL2ModSW24SFPInfoTable
OBJECT-TYPE
A list of sfp info entry. The numbers of entries are given by the value of feL2ModSW24SFPInfoNumber.
1.3.6.1.4.1.5205.2.19.1.14.2not-accessiblecurrent
feL2ModSW24SFPInfoEntry
OBJECT-TYPE
Entry(s) for SFP information.
1.3.6.1.4.1.5205.2.19.1.14.2.1not-accessiblecurrent
feL2ModSW24SFPInfoIndex
OBJECT-TYPE
The index of the sfp info entry.
1.3.6.1.4.1.5205.2.19.1.14.2.1.1INTEGER (1..2147483647)read-onlycurrent
feL2ModSW24SFPConnectorType
OBJECT-TYPE
Get connector type of the sfp.
1.3.6.1.4.1.5205.2.19.1.14.2.1.2DisplayStringread-onlycurrent
feL2ModSW24SFPFiberType
OBJECT-TYPE
Get fiber type of the sfp.
1.3.6.1.4.1.5205.2.19.1.14.2.1.3DisplayStringread-onlycurrent
feL2ModSW24SFPWavelength
OBJECT-TYPE
Get tx central wavelength of the sfp.
1.3.6.1.4.1.5205.2.19.1.14.2.1.4DisplayStringread-onlycurrent
feL2ModSW24SFPBaudRate
OBJECT-TYPE
Get baud rate of the sfp.
1.3.6.1.4.1.5205.2.19.1.14.2.1.5DisplayStringread-onlycurrent
feL2ModSW24SFPVendorOUI
OBJECT-TYPE
Get vendor OUI of the sfp.
1.3.6.1.4.1.5205.2.19.1.14.2.1.6DisplayStringread-onlycurrent
feL2ModSW24SFPVendorName
OBJECT-TYPE
Get vendor name of the sfp.
1.3.6.1.4.1.5205.2.19.1.14.2.1.7DisplayStringread-onlycurrent
feL2ModSW24SFPVendorPN
OBJECT-TYPE
Get vendor part number of the sfp.
1.3.6.1.4.1.5205.2.19.1.14.2.1.8DisplayStringread-onlycurrent
feL2ModSW24SFPVendorRev
OBJECT-TYPE
Get vendor revision number of the sfp.
1.3.6.1.4.1.5205.2.19.1.14.2.1.9DisplayStringread-onlycurrent
feL2ModSW24SFPVendorSN
OBJECT-TYPE
Get vendor serial number of the sfp.
1.3.6.1.4.1.5205.2.19.1.14.2.1.10DisplayStringread-onlycurrent
feL2ModSW24SFPDateCode
OBJECT-TYPE
Get data code of the sfp.
1.3.6.1.4.1.5205.2.19.1.14.2.1.11DisplayStringread-onlycurrent
feL2ModSW24SFPTemperature
OBJECT-TYPE
Get current temperature of the sfp.
1.3.6.1.4.1.5205.2.19.1.14.2.1.12DisplayStringread-onlycurrent
feL2ModSW24SFPVcc
OBJECT-TYPE
Get current internal supply voltage of the sfp.
1.3.6.1.4.1.5205.2.19.1.14.2.1.13DisplayStringread-onlycurrent
feL2ModSW24SFPTxBias
OBJECT-TYPE
Get current TX Bias of the sfp.
1.3.6.1.4.1.5205.2.19.1.14.2.1.14DisplayStringread-onlycurrent
feL2ModSW24SFPTxPWR
OBJECT-TYPE
Get current TX output power of the sfp.
1.3.6.1.4.1.5205.2.19.1.14.2.1.15DisplayStringread-onlycurrent
feL2ModSW24SFPRxPWR
OBJECT-TYPE
Get current Received Power of the sfp.
1.3.6.1.4.1.5205.2.19.1.14.2.1.16DisplayStringread-onlycurrent
feL2ModSW24TrapEntry
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.20
feL2ModSW24TrapVariable
OBJECT-IDENTITY
1.3.6.1.4.1.5205.2.19.1.21
username
OBJECT-TYPE
System account name.
1.3.6.1.4.1.5205.2.19.1.21.1DisplayStringread-onlycurrent
groupId
OBJECT-TYPE
The Trunk group ID of LACP.
1.3.6.1.4.1.5205.2.19.1.21.2INTEGER (1..8)read-onlycurrent
actorkey
OBJECT-TYPE
This is the actor key information for LACP.
1.3.6.1.4.1.5205.2.19.1.21.3INTEGER (1..2147483647)read-onlycurrent
partnerkey
OBJECT-TYPE
This is the partner key information for LACP.
1.3.6.1.4.1.5205.2.19.1.21.4INTEGER (1..2147483647)read-onlycurrent

Notifications

NameOIDStatus
feL2ModSW24ModuleInserted
NOTIFICATION-TYPE
Send the trap when a module is inserted to the system. The OID value means the port number.
1.3.6.1.4.1.5205.2.19.1.20.1current
feL2ModSW24ModuleRemoved
NOTIFICATION-TYPE
Send the trap when a module is removed from the system. The OID value means the port number.
1.3.6.1.4.1.5205.2.19.1.20.2current
feL2ModSW24LoopDetected
NOTIFICATION-TYPE
Send the trap when loop condition has been detected. The OID value means the port number.
1.3.6.1.4.1.5205.2.19.1.20.5current
feL2ModSW24StpStateDisabled
NOTIFICATION-TYPE
Send the trap when the operational state of STP is from enabled to disabled.
1.3.6.1.4.1.5205.2.19.1.20.100current
feL2ModSW24StpStateEnabled
NOTIFICATION-TYPE
Send the trap when the operational state of STP is from disabled to enabled.
1.3.6.1.4.1.5205.2.19.1.20.101current
feL2ModSW24StpTopologyChanged
NOTIFICATION-TYPE
Send the trap when RSTP determines a port should enter the FORWARDING state (a topology change occurs). The OID value is the ifIndex of the port that produces the topology change
1.3.6.1.4.1.5205.2.19.1.20.102current
feL2ModSW24LacpStateDisabled
NOTIFICATION-TYPE
Send the trap when the operational state of LACP is from enabled to disabled. The OID value means the disabled Group ID.
1.3.6.1.4.1.5205.2.19.1.20.120current
feL2ModSW24LacpStateEnabled
NOTIFICATION-TYPE
Send the trap when the operational state of LACP is from disabled to enabled. The OID value means the disabled Group ID.
1.3.6.1.4.1.5205.2.19.1.20.121current
feL2ModSW24LacpPortAdded
NOTIFICATION-TYPE
Send the trap when the state of port is in 'trunk ready'.
1.3.6.1.4.1.5205.2.19.1.20.123current
feL2ModSW24LacpPortTrunkFailure
NOTIFICATION-TYPE
Send the trap when one port is not able to be aggregated due to duplex-mode of the port.
1.3.6.1.4.1.5205.2.19.1.20.124current
feL2ModSW24GvrpStateDisabled
NOTIFICATION-TYPE
Send the trap when the operational state of GVRP is from enabled to disabled.
1.3.6.1.4.1.5205.2.19.1.20.140current
feL2ModSW24GvrpStateEnabled
NOTIFICATION-TYPE
Send the trap when the operational state of LACP is from disabled to enabled.
1.3.6.1.4.1.5205.2.19.1.20.141current
feL2ModSW24VlanStateDisabled
NOTIFICATION-TYPE
Send the trap when the operational state of vlan is from enabled to disabled. The OID value means the enabled Group ID.
1.3.6.1.4.1.5205.2.19.1.20.150current
feL2ModSW24VlanPortBaseEnabled
NOTIFICATION-TYPE
Send the trap when the operational state of vlan is changed to port-based vlan.
1.3.6.1.4.1.5205.2.19.1.20.151current
feL2ModSW24VlanTagBaseEnabled
NOTIFICATION-TYPE
Send the trap when the operational state of vlan is changed to tag-based vlan.
1.3.6.1.4.1.5205.2.19.1.20.152current
feL2ModSW24VlanMetroModeEnabled
NOTIFICATION-TYPE
Send the trap when the operational state of vlan is changed to Metro-mode vlan. The OID value means the uplink port with this metro-mode vlan.
1.3.6.1.4.1.5205.2.19.1.20.153current
feL2ModSW24VlanDoubleTagEnabled
NOTIFICATION-TYPE
Send the trap when the operational state of vlan is changed to Double-tag vlan.
1.3.6.1.4.1.5205.2.19.1.20.154current
feL2ModSW24UserLogin
NOTIFICATION-TYPE
Send the trap when one user logins the system.
1.3.6.1.4.1.5205.2.19.1.20.200current
feL2ModSW24UserLogout
NOTIFICATION-TYPE
Send the trap when one user logouts the system.
1.3.6.1.4.1.5205.2.19.1.20.201current