PKT-STORM-CTRL-MIB
- Registered at
- 1.3.6.1.4.1.171.12.25
- Last updated
- 1908-09-03 00:00
- Organization
- Namespace
- dlink
- Source file
PKT-STORM-CTRL-MIB- Digest
sha256:912bfa4284faf4d9cf1c6e3565e5f91df1a4c37610327d6230238c6898f92844
Description
The Structure of packet storm control management for the proprietary enterprise.
Imports
| From | Symbols |
|---|---|
| DLINK-ID-REC-MIB | dlink-common-mgmt |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
DLINK-ID-REC-MIB PKT-STORM-CTRL-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| PortList type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| swPktStormCtrl OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.25.1 | |||
| swPktStormTrapCtrl OBJECT-TYPE This object controls when a storm control notification will be generated. If the object is set to none (1): No notifications will be generated. stormOccurred(2): stormCleared(3):A notification will be generated when a storm event is detected or cleared respectively. both (4): A notification will be generated both when a storm event is detected and cleared. NOTE:The default value of this object is none(1). | 1.3.6.1.4.1.171.12.25.1.2 | INTEGER {none(1), stormOccurred(2), stormCleared(3), both(4)} | read-write | current |
| swPktStormInfo OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.25.2 | |||
| swPktStormMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.25.3 | |||
| swPktStormCtrlTable OBJECT-TYPE A table that contains information about packet storm control. A S/W mechanism is provided to monitor the traffic rate in addition to the H/W storm control mechanism. If the traffic rate is too high, this port will be shut down. | 1.3.6.1.4.1.171.12.25.3.1 | not-accessible | current | |
| swPktStormCtrlEntry OBJECT-TYPE A list of information for each port of the device. | 1.3.6.1.4.1.171.12.25.3.1.1 | not-accessible | current | |
| swPktStormCtrlPortIndex OBJECT-TYPE This object indicates the device's port number.(1..Max port number in the device).It is used to specify a range of ports to be configured. | 1.3.6.1.4.1.171.12.25.3.1.1.1 | INTEGER (0..65535) | read-only | current |
| swPktStormCtrlthreshold OBJECT-TYPE This object is the upper threshold at which the specified storm control will turn on. | 1.3.6.1.4.1.171.12.25.3.1.1.2 | Integer32 | read-write | current |
| swPktStormCtrlBroadcastStatus OBJECT-TYPE This object indicates whether the broadcast storm control is enabled or disabled. | 1.3.6.1.4.1.171.12.25.3.1.1.3 | INTEGER {disabled(1), enabled(2)} | read-write | current |
| swPktStormCtrlMulticastStatus OBJECT-TYPE This object indicates whether the multicast storm control is enabled or disabled. | 1.3.6.1.4.1.171.12.25.3.1.1.4 | INTEGER {disabled(1), enabled(2)} | read-write | current |
| swPktStormCtrlUnicastStatus OBJECT-TYPE This object indicates whether the unicast (Destination Loopback Fail) storm control is enabled or disabled. | 1.3.6.1.4.1.171.12.25.3.1.1.5 | INTEGER {disabled(1), enabled(2)} | read-write | current |
| swPktStormCtrlActionStatus OBJECT-TYPE There are two actions to take for storm control, shutdown and drop. The former is implemented in S/W, and the latter is implemented in H/W. If a user chooses shutdown, they will need to configure both the back_off and the time_interval. | 1.3.6.1.4.1.171.12.25.3.1.1.6 | INTEGER {shutdown(1), drop(2)} | read-write | current |
| swPktStormCtrlCountDown OBJECT-TYPE If a packet storm has been encountered continuously on a given port for a long period of time (indicated by the value of this object), the port will be shut down forever until it's recovered manually.The range of the countdown time is 5 to 30 minutes. A user can configure the countdown to 0 to disable the function of shutdown forever. If this value is set from 1 to 4, a 'bad value' return code will be indicated | 1.3.6.1.4.1.171.12.25.3.1.1.7 | INTEGER (0..30) | read-write | current |
| swPktStormCtrlTimeinterval OBJECT-TYPE This object is the sampling interval of received packet counts. The possible value will be from 5 to 30 seconds. | 1.3.6.1.4.1.171.12.25.3.1.1.8 | INTEGER (5..30) | read-write | current |
| swPktStormNotify OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.25.5 | |||
| swPktStormNotifyPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.25.5.0 |
Notifications
| Name | OID | Status |
|---|---|---|
| swPktStormOccurred NOTIFICATION-TYPE This trap is sent when a packet storm is detected by a packet storm mechanism and a shutdown action is taken. | 1.3.6.1.4.1.171.12.25.5.0.1 | current |
| swPktStormCleared NOTIFICATION-TYPE The trap is sent when the packet storm is cleared by the packet storm mechanism. | 1.3.6.1.4.1.171.12.25.5.0.2 | current |