PEPVPN-SPEEDFUSION
- Registered at
- 1.3.6.1.4.1.23695.200.1.10
- Last updated
- 2013-05-14 00:00
- Organization
- PEPLINK
- Namespace
- peplink
- Source file
PEPVPN-SPEEDFUSION- Digest
sha256:1f32f15a8371aa0e17abe9320b2365ea8819a09afbc428e591b504ec7345bc09
Description
MIB module for PepVPN.
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter64, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
PEPVPN-SPEEDFUSION SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| peplink OBJECT-IDENTITY | 1.3.6.1.4.1.23695 | |||
| productMib OBJECT-IDENTITY | 1.3.6.1.4.1.23695.200 | |||
| generalMib OBJECT-IDENTITY | 1.3.6.1.4.1.23695.200.1 | |||
| pepvpnMib OBJECT-IDENTITY | 1.3.6.1.4.1.23695.200.1.10 | |||
| pepVpnInfo OBJECT-IDENTITY | 1.3.6.1.4.1.23695.200.1.10.1.1 | |||
| pepVpnStatusTable OBJECT-TYPE PepVpn status table | 1.3.6.1.4.1.23695.200.1.10.1.1.2 | not-accessible | current | |
| pepVpnStatusEntry OBJECT-TYPE An entry in the pepVpnStatusTable | 1.3.6.1.4.1.23695.200.1.10.1.1.2.1 | not-accessible | current | |
| pepVpnStatusId OBJECT-TYPE PepVpn ID. | 1.3.6.1.4.1.23695.200.1.10.1.1.2.1.1 | INTEGER | read-only | current |
| pepVpnStatusProfileName OBJECT-TYPE PepVpn profile name. | 1.3.6.1.4.1.23695.200.1.10.1.1.2.1.2 | OCTET STRING (SIZE(1..32)) | read-only | current |
| pepVpnStatusConnectionState OBJECT-TYPE PepVpn connection state. | 1.3.6.1.4.1.23695.200.1.10.1.1.2.1.3 | INTEGER {start(0), authen(1), tunnel(2), route(3), connected(4)} | read-only | current |
| pepVpnStatusEncryption OBJECT-TYPE PepVpn encryption. | 1.3.6.1.4.1.23695.200.1.10.1.1.2.1.4 | INTEGER {na(0), off(1), aes256(2)} | read-only | current |
| pepVpnStatusL2Bridging OBJECT-TYPE PepVpn L2 bridging status. | 1.3.6.1.4.1.23695.200.1.10.1.1.2.1.5 | INTEGER {disable(0), enable(1)} | read-only | current |
| pepVpnStatusL2Vlan OBJECT-TYPE PepVpn L2 VLAN ID. Remark: If the value equals 0, means VLAN ID not applicable in this PepVpn. | 1.3.6.1.4.1.23695.200.1.10.1.1.2.1.6 | INTEGER (1..4094) | read-only | current |
| pepVpnRemotePeerId OBJECT-TYPE PepVpn remote peer ID. | 1.3.6.1.4.1.23695.200.1.10.1.1.2.1.7 | INTEGER | read-only | current |
| pepVpnRemotePeer OBJECT-TYPE PepVpn remote peer. | 1.3.6.1.4.1.23695.200.1.10.1.1.2.1.8 | OCTET STRING | read-only | current |
| pepVpnStatusWanTable OBJECT-TYPE PepVpn status network WAN table | 1.3.6.1.4.1.23695.200.1.10.1.1.3 | not-accessible | current | |
| pepVpnStatusWanEntry OBJECT-TYPE An entry in the pepVpnStatusWanTable | 1.3.6.1.4.1.23695.200.1.10.1.1.3.1 | not-accessible | current | |
| pepVpnStatusWanId OBJECT-TYPE WAN id. | 1.3.6.1.4.1.23695.200.1.10.1.1.3.1.1 | INTEGER | read-only | current |
| pepVpnStatusWanName OBJECT-TYPE WAN name. | 1.3.6.1.4.1.23695.200.1.10.1.1.3.1.2 | OCTET STRING (SIZE(1..32)) | read-only | current |
| pepVpnStatusWanTxBytes OBJECT-TYPE WAN transmitted bytes. | 1.3.6.1.4.1.23695.200.1.10.1.1.3.1.3 | Counter64 | read-only | current |
| pepVpnStatusWanRxBytes OBJECT-TYPE WAN received bytes. | 1.3.6.1.4.1.23695.200.1.10.1.1.3.1.4 | Counter64 | read-only | current |
| pepVpnStatusWanDropPackets OBJECT-TYPE WAN drop packets. | 1.3.6.1.4.1.23695.200.1.10.1.1.3.1.5 | INTEGER | read-only | current |
| pepVpnStatusWanLatency OBJECT-TYPE WAN latency(units: ms). | 1.3.6.1.4.1.23695.200.1.10.1.1.3.1.6 | INTEGER | read-only | current |
| pepVpnStatusRemoteNetworkTable OBJECT-TYPE PepVpn status remote network table | 1.3.6.1.4.1.23695.200.1.10.1.1.4 | not-accessible | current | |
| pepVpnStatusRemoteNetworkEntry OBJECT-TYPE An entry in the pepVpnStatusRemoteNetworkTable | 1.3.6.1.4.1.23695.200.1.10.1.1.4.1 | not-accessible | current | |
| pepVpnStatusRemoteNetowrkId OBJECT-TYPE PepVpn remote network id. | 1.3.6.1.4.1.23695.200.1.10.1.1.4.1.1 | INTEGER | read-only | current |
| pepVpnStatusRemoteNetwork OBJECT-TYPE PepVpn remote network IP. | 1.3.6.1.4.1.23695.200.1.10.1.1.4.1.2 | IpAddress | read-only | current |
| pepVpnStatusRemoteSubnet OBJECT-TYPE PepVpn remote network subnet. | 1.3.6.1.4.1.23695.200.1.10.1.1.4.1.3 | IpAddress | read-only | current |