PDU-MIB
- Registered at
- 1.3.6.1.4.1.13742.4
- Last updated
- 2016-02-22 00:00
- Organization
- Raritan
- Revisions
- 2016-02-22 00:00, 2016-02-03 00:00, 2015-11-02 00:00, 2015-10-26 00:00, 2015-10-16 00:00, 2015-10-02 00:00, 2015-06-19 00:00, 2015-03-11 00:00, 2014-04-03 00:00, 2012-03-22 00:00, 2012-03-15 00:00, 2012-03-14 00:00, 2011-11-30 00:00, 2011-11-07 00:00, 2011-10-06 00:00, 2011-05-17 00:00, 2011-05-11 00:00, 2011-04-18 00:00, 2011-02-14 00:00, 2011-01-24 00:00, 2010-11-30 00:00, 2010-11-04 00:00, 2010-07-21 00:00, 2010-07-19 00:00, 2010-07-15 00:00, 2010-07-13 00:00, 2010-06-29 00:00, 2010-06-07 00:00, 2010-05-27 00:00, 2010-05-20 00:00, 2010-05-17 00:00, 2009-06-09 00:00, 2009-04-20 00:00, 2009-02-13 00:00, 2009-02-12 00:00, 2008-12-01 00:00, 2008-10-24 00:00, 2008-09-25 00:00, 2008-09-05 00:00, 2008-06-05 00:00, 2007-11-28 00:00, 2007-06-20 00:00
- Namespace
- raritan
- Source file
PDU-MIB- Digest
sha256:66971f1f2725621ab09f086906c81a3163e17061f7b6c25e040016469bfbe1e2
Description
This mib describes the SNMP functions of the Dominion PX Power Distribution Unit by Raritan Computer.
Contact
Author: Raritan Americas, Inc. postal: Raritan Americas, Inc. 400 Cottontail Lane Somerset, NJ 08873 email: tech@raritan.com phone: +1 732 764 8886
Imports
| From | Symbols |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, enterprises, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
INET-ADDRESS-MIB PDU-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| DegreesCelsius TEXTUAL-CONVENTION Data type for reporting thresholds associated with temperature sensors. If the underlying hardware sensor indicates 1 degree Celsius, then the SNMP agent will report a value of 1 degree Celsius. No scaling is performed for this type. | current | |||
| EnabledDisabledEnumeration TEXTUAL-CONVENTION The status of a PowerCIM | current | |||
| EventDirectionEnumeration TEXTUAL-CONVENTION The event direction | current | |||
| EventTypeEnumeration TEXTUAL-CONVENTION The event type | current | |||
| Hertz TEXTUAL-CONVENTION Data type for reporting sensor readings and thresholds associated with frequency sensors. If the underlying hardware sensor indicates 1 Hertz, then the SNMP agent will report a value of 1 Hertz. No scaling is performed for this type. | current | |||
| MilliAmps TEXTUAL-CONVENTION Data type for reporting sensor readings and thresholds associated with current sensors. If the underlying hardware sensor indicates 1 amp, then the SNMP agent will report a value of 1000 milliamps. The value is scaled in this manner as a way to deal with floating point types that SNMP does not currently support. | current | |||
| MilliVolts TEXTUAL-CONVENTION Data type for reporting sensor readings and thresholds associated with voltage sensors. If the underlying hardware sensor indicates 1 volts, then the SNMP agent will report a value of 1000 millivolts. The value is scaled in this manner as a way to deal with floating point types that SNMP does not currently support. | current | |||
| Percentage TEXTUAL-CONVENTION Data type for reporting values in percentage. | current | |||
| PowerCIMStatusEnumeration TEXTUAL-CONVENTION The status of a PowerCIM | current | |||
| PowerFactorPercentage TEXTUAL-CONVENTION Data type for reporting sensor readings and thresholds associated with power factor sensors. The power factor of an AC power system is defined as the ratio of the real or active power to the apparent power and is a number between 0 and 1. A PowerFactorPercentage value is calculated by taking this ratio and multiplying by 100. The power factor is used to indicate how efficiently a particular load is utilizing energy. | current | |||
| RelativeHumidity TEXTUAL-CONVENTION Data type for reporting sensor readings and thresholds associated with humidity sensors. Relative humidity is expressed as percentage and is defined as the ratio of the partial pressure of water vapor in a gaseous mixture of air and water vapor to the saturated vapor pressure of water at a given temperature. | current | |||
| SensorClassEnumeration TEXTUAL-CONVENTION The class of sensor in the event | current | |||
| SensorStateEnumeration TEXTUAL-CONVENTION The states a sensor can be in.This enumeration is deprecated starting with PX 1.3.5 | deprecated | |||
| SensorTypeEnumeration TEXTUAL-CONVENTION The types a sensor can be. This enumeration is deprecated starting with PX 1.3.5 | deprecated | |||
| SensorUnitsEnumeration TEXTUAL-CONVENTION The types a sensor can be. | current | |||
| StateOfSensorEnumeration TEXTUAL-CONVENTION The states a sensor can be in. | current | |||
| TenthDegreesCelsius TEXTUAL-CONVENTION Data type for reporting sensor readings associated with temperature sensors. If the underlying hardware sensor indicates 1 degree Celsius, then the SNMP agent will report a value of 10 tenth degrees Celsius. The value is scaled in this manner as a way to deal with floating point types that SNMP does not currently support. | current | |||
| TypeOfSensorEnumeration TEXTUAL-CONVENTION The types a sensor can be. | current | |||
| VoltAmps TEXTUAL-CONVENTION Data type for reporting sensor readings and thresholds associated with apparent power sensors. If the underlying hardware sensor indicates 1 volt-amp, then the SNMP agent will report a value of 1 volt-amp. No scaling is performed for this type. | current | |||
| WattHours TEXTUAL-CONVENTION Data type for reporting the active energy | current | |||
| Watts TEXTUAL-CONVENTION Data type for reporting sensor readings and thresholds associated with active power sensors. If the underlying hardware sensor indicates 1 watt, then the SNMP agent will report a value of 1 watt. No scaling is performed for this type. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| pdu OBJECT-IDENTITY | 1.3.6.1.4.1.13742.4 | |||
| traps OBJECT-IDENTITY | 1.3.6.1.4.1.13742.4.0 | |||
| board OBJECT-IDENTITY | 1.3.6.1.4.1.13742.4.1 | |||
| info OBJECT-IDENTITY | 1.3.6.1.4.1.13742.4.1.1 | |||
| firmwareVersion OBJECT-TYPE The current firmware version in the following format: major.minor.dot.buildnumber. Example: 1.3.5.7416 | 1.3.6.1.4.1.13742.4.1.1.1 | DisplayString | read-only | current |
| serialNumber OBJECT-TYPE The serial number. | 1.3.6.1.4.1.13742.4.1.1.2 | DisplayString | read-only | current |
| ipAddress OBJECT-TYPE The current IP address. A value of 0.0.0.0 indicates an error or an unset option. | 1.3.6.1.4.1.13742.4.1.1.3 | IpAddress | read-only | current |
| netmask OBJECT-TYPE The current Netmask. A value of 0.0.0.0 indicates an error or an unset option. | 1.3.6.1.4.1.13742.4.1.1.4 | IpAddress | read-only | current |
| gateway OBJECT-TYPE The current Gateway. A value of 0.0.0.0 indicates an error or an unset option. | 1.3.6.1.4.1.13742.4.1.1.5 | IpAddress | read-only | current |
| mac OBJECT-TYPE The current MAC address. | 1.3.6.1.4.1.13742.4.1.1.6 | MacAddress | read-only | current |
| hardwareRev OBJECT-TYPE The hardware revision number. | 1.3.6.1.4.1.13742.4.1.1.7 | Integer32 (0..255) | read-only | current |
| userName OBJECT-TYPE The login of a user. | 1.3.6.1.4.1.13742.4.1.1.10 | DisplayString | accessible-for-notify | current |
| objectName OBJECT-TYPE The model type of the device | 1.3.6.1.4.1.13742.4.1.1.12 | DisplayString | accessible-for-notify | current |
| objectInstance OBJECT-TYPE The device name. | 1.3.6.1.4.1.13742.4.1.1.13 | DisplayString | accessible-for-notify | current |
| targetUser OBJECT-TYPE The user record being operated on | 1.3.6.1.4.1.13742.4.1.1.14 | DisplayString | accessible-for-notify | current |
| groupName OBJECT-TYPE The group record being operated on | 1.3.6.1.4.1.13742.4.1.1.15 | DisplayString | accessible-for-notify | current |
| imageVersion OBJECT-TYPE The version of the Upgrade image | 1.3.6.1.4.1.13742.4.1.1.18 | DisplayString | accessible-for-notify | current |
| sensorDescr OBJECT-TYPE Sensor description indicating which sensor experienced a threshold event. When applicable, the description will indicate the sensor number. | 1.3.6.1.4.1.13742.4.1.1.19 | DisplayString | accessible-for-notify | current |
| thresholdDescr OBJECT-TYPE Threshold description indicating which configured threshold has been triggered (or cleared). | 1.3.6.1.4.1.13742.4.1.1.20 | DisplayString | accessible-for-notify | current |
| thresholdSeverity OBJECT-TYPE String (Warning, Critical, etc...) indicating the severity of the threshold which has been triggered (or cleared). | 1.3.6.1.4.1.13742.4.1.1.21 | DisplayString | accessible-for-notify | current |
| thresholdEventType OBJECT-TYPE String (triggered, cleared) indicating if the threshold event indicates that a configured threshold has been triggered or cleared. | 1.3.6.1.4.1.13742.4.1.1.22 | DisplayString | accessible-for-notify | current |
| status OBJECT-TYPE The success status of an operation | 1.3.6.1.4.1.13742.4.1.1.23 | DisplayString | accessible-for-notify | current |
| slaveIpAddress OBJECT-TYPE In an outlet grouping configuration, this is the IP address of slave PDU. A value of 0.0.0.0 indicates an error or an unset option. | 1.3.6.1.4.1.13742.4.1.1.24 | IpAddress | read-only | current |
| inputCurrentRating OBJECT-TYPE The input current Rating | 1.3.6.1.4.1.13742.4.1.1.25 | MilliAmps | read-only | current |
| ratedVoltage OBJECT-TYPE PDU Rated Voltage | 1.3.6.1.4.1.13742.4.1.1.26 | DisplayString | read-only | current |
| ratedPower OBJECT-TYPE PDU Rated Power | 1.3.6.1.4.1.13742.4.1.1.27 | DisplayString | read-only | current |
| outletSwitching OBJECT-TYPE Outlet switching: enabled/disabled; for non-switched PDUs, this value can be read, but cannot be written | 1.3.6.1.4.1.13742.4.1.1.28 | DisplayString | read-write | current |
| dataLogging OBJECT-TYPE Data Retrieval: enabled/disabled | 1.3.6.1.4.1.13742.4.1.1.29 | DisplayString | read-write | current |
| dataLoggingInterval OBJECT-TYPE Data Logging periodicity in seconds. This is the periodicity of the data in the buffer. This value must be a multiple of 3 between 3 and 600. For example, 60 is valid, but 64 is not valid This is being deprecated in favor of measurementsPerLogEntry. The mapping is as follows. dataLoggingInterval measurementsPerLogEntry 3n n Example: dataLoggingInterval is 60, so every 60 seconds (or 20th sample) data will be placed in the data log measurementsPerLogEntry is 20, so the data log sill store the minimum, average and maximum of every 20 samples | 1.3.6.1.4.1.13742.4.1.1.30 | Integer32 | read-write | deprecated |
| dataCollectionInterval OBJECT-TYPE Data Collection periodicity. This is the periodicity of the data collected by the PX. This value is fixed at 3 seconds. | 1.3.6.1.4.1.13742.4.1.1.31 | Integer32 | read-only | current |
| outletEnergySupport OBJECT-TYPE Outlet Energy Support: Yes/No If the value is No, then outletWattHours and dataLogOutletWattHours will be zero | 1.3.6.1.4.1.13742.4.1.1.32 | DisplayString | read-only | current |
| currentUnbalanceSupport OBJECT-TYPE current Unbalance calculations Supported: Yes/No If the value is No, then currentUnbalance will be zero Default is No | 1.3.6.1.4.1.13742.4.1.1.33 | DisplayString | read-write | current |
| externalSensorsZCoordinateUnits OBJECT-TYPE External Sensor Z Coordinate units: Freeform or Rack Units (U) Default is U | 1.3.6.1.4.1.13742.4.1.1.34 | DisplayString | read-write | current |
| inlineMeter OBJECT-TYPE Is this unit an inline meter? Yes/No If Yes, then the folowing pairings hold: Inlet 1 <-> Outlet 1 Inlet 2 <-> Outlet 2 Inlet 3 <-> Outlet 3 Inlet 4 <-> Outlet 4 Use the inletTable to obtain inlet data Use the inletPoleTable to obtain the line data for an inlet. | 1.3.6.1.4.1.13742.4.1.1.35 | DisplayString | read-only | current |
| oldSensorState OBJECT-TYPE The old sensor state used in Sensor State Transition traps. | 1.3.6.1.4.1.13742.4.1.1.36 | StateOfSensorEnumeration | accessible-for-notify | current |
| externalSensorNumber OBJECT-TYPE A unique value for each sensor. Its value ranges between 1 and the value of externalSensorCount. | 1.3.6.1.4.1.13742.4.1.1.37 | Integer32 (1..256) | accessible-for-notify | current |
| sensorIdentificationString OBJECT-TYPE String that uniquely identifies the external sensor. Format is: SensorType,ChannelNumber,SensorSubtype,SerialNumber Example external temperature sensor: Temperature,,,AEI8160083 Example external smoke detection sensor: onOff,2,contact,AEJ8160085 Example outlet Current: rmsCurrent,,, | 1.3.6.1.4.1.13742.4.1.1.38 | DisplayString | accessible-for-notify | current |
| lastUpgradeStatus OBJECT-TYPE A bit string which indicates which the status of the last upgrade. A value of 1 for a bit position indicates that the corresponding upgrade failed. If all bits are zero, then the upgrade succeeded; otherwise check lastUpgradeErrorDescription for further information. | 1.3.6.1.4.1.13742.4.1.1.39 | Bits {mainController(0), psoc1(1), psoc2(2), psoc3(3), psoc4(4), psoc5(5), psoc6(6)} | read-only | current |
| lastUpgradeTimestamp OBJECT-TYPE The time when the last upgrade completed | 1.3.6.1.4.1.13742.4.1.1.40 | DateAndTime | read-only | current |
| lastUpgradeErrorDescription OBJECT-TYPE String that describes the upgrade errror. This is an empty string if the upgrade succeeded. Format is Failed PSOCs: 1[O:1,2,3-7];3[O:6-9,10-12] This indicates that upgrade of psocs 1 and 3 failed and psoc1 affects outlets 1,2, 3-7 and psoc2 affects outlets 6-9,10-12 | 1.3.6.1.4.1.13742.4.1.1.41 | DisplayString | read-only | current |
| powerCIMStatus OBJECT-TYPE The status of the Power CIM: on or off | 1.3.6.1.4.1.13742.4.1.1.42 | PowerCIMStatusEnumeration | read-write | current |
| measurementsPerLogEntry OBJECT-TYPE The number of measurements used for each entry in the log. 1<= Value <= 200 Default is 20 This is related to dataLoggingInterval as shown below dataLoggingInterval measurementsPerLogEntry 3n n Example: dataLoggingInterval is 60, so every 60 seconds (or 20th sample) data will be placed in the data log measurementsPerLogEntry is 20, so the data log sill store the minimum, average and maximum of every 20 samples | 1.3.6.1.4.1.13742.4.1.1.43 | Integer32 | read-write | current |
| psocNumber OBJECT-TYPE The psoc (Outlet Controller) number | 1.3.6.1.4.1.13742.4.1.1.44 | Integer32 | accessible-for-notify | current |
| altitude OBJECT-TYPE The altitude (height above sea level) of the PDU in meters. 0 <= Value <= 3000; default value is 0 meters | 1.3.6.1.4.1.13742.4.1.1.45 | Integer32 (0..3000) | read-write | current |
| configureAlerts OBJECT-TYPE This is an operation. It has write-only semantics. GET operation will return the empty string. For SET operations, it configures alerts The format is a comma separated list of the following parameters. sensorClass, eventType, eventDirection, policyName For sensorclass: use the SensorClass eumeration For eventType: use the EventType enumeration For eventDirection: use the EventDirection enumeration For Policy Name: use the name of the policy; the Policy Name is case sensitive Note: setting this variable will overwrite the existing policy Example: if the External Temperature upper non-critical threshold is either asserted and deasserted, then execute the policy named multiple destinations the string would be 0,1,2,multiple destinations | 1.3.6.1.4.1.13742.4.1.1.46 | DisplayString | read-write | current |
| fipsMode OBJECT-TYPE The fips mode: either enabled or disabled. The mode can be set (changed) only if both of the following conditions hold a) the user is admin b) snmpv3 is being used. Changing this mode will result in a reboot of the PX When the PX is in FIPS mode, the follwing conditions hold. a) FIPS approved algorithms must be used b) snmp v1 & v2c are not supported b) snmp v3 must be used with AES and SHA c) https must be used; http is not supported d) Radius authentication is not supported e) Ldaps must be used; ldap is not supported f) ipmi v2.0 must be used | 1.3.6.1.4.1.13742.4.1.1.47 | EnabledDisabledEnumeration | read-write | current |
| synchronizeWithNTPServer OBJECT-TYPE Will time be obtained using NTP? Deafault is disabled, i.e. time will not be obtained from NTP servers. | 1.3.6.1.4.1.13742.4.1.1.48 | EnabledDisabledEnumeration | read-write | current |
| useDHCPProvidedNTPServer OBJECT-TYPE Will the NTP server addresses be provided by DHCP/BOOTP? This is used only if synchronizeWithNTPServer is enabled Default is enabled, i.e. DHCP provided NTP servers will be used | 1.3.6.1.4.1.13742.4.1.1.49 | EnabledDisabledEnumeration | read-write | current |
| primaryNTPServerAddressType OBJECT-TYPE Represents the type of the corresponding instance of primaryNTPServerAddress object. | 1.3.6.1.4.1.13742.4.1.1.50 | InetAddressType | read-write | current |
| primaryNTPServerAddress OBJECT-TYPE The address of the primary ntp server. | 1.3.6.1.4.1.13742.4.1.1.51 | InetAddress | read-write | current |
| secondaryNTPServerAddressType OBJECT-TYPE Represents the type of the corresponding instance of secondaryNTPServerAddress object. Default is ipv4 | 1.3.6.1.4.1.13742.4.1.1.52 | InetAddressType | read-write | current |
| secondaryNTPServerAddress OBJECT-TYPE The address of the secondary ntp server. | 1.3.6.1.4.1.13742.4.1.1.53 | InetAddress | read-write | current |
| daylightSavingsTime OBJECT-TYPE Is daylight savings time enabled? Default is disabled | 1.3.6.1.4.1.13742.4.1.1.55 | EnabledDisabledEnumeration | read-write | current |
| thresholdValue OBJECT-TYPE The value of the threshold that has been triggered (or cleared). It is used in the thresholdAlarm trap for external numeric sensors only. | 1.3.6.1.4.1.13742.4.1.1.56 | DisplayString | accessible-for-notify | current |
| sensorValue OBJECT-TYPE The sensor reading that triggered (or cleared) the threshold. It is used in the thresholdAlarm trap for external numeric sensors only. | 1.3.6.1.4.1.13742.4.1.1.57 | DisplayString | accessible-for-notify | current |
| ipmiOverLAN OBJECT-TYPE IPMI over LAN Mode: either enabled or disabled. It is strongly recommended that SNMPv3 be used to change the mode; SNMPv2c may also be used, but is not recommended. If SNMPv3 is used, then the change can be made only by users belonging to the Admin group. Changing the mode will result in a reboot of the PX. | 1.3.6.1.4.1.13742.4.1.1.58 | EnabledDisabledEnumeration | read-write | current |
| outlets OBJECT-IDENTITY | 1.3.6.1.4.1.13742.4.1.2 | |||
| outletCount OBJECT-TYPE The number of outlets (regardless of their current state) present on this pdu. | 1.3.6.1.4.1.13742.4.1.2.1 | Integer32 | read-only | current |
| outletTable OBJECT-TYPE A list of outlet entries. The number of entries is given by the value of outletCount. | 1.3.6.1.4.1.13742.4.1.2.2 | not-accessible | current | |
| outletEntry OBJECT-TYPE An outlet entry containing objects at the for a particular outlet. | 1.3.6.1.4.1.13742.4.1.2.2.1 | not-accessible | current | |
| outletIndex OBJECT-TYPE A unique value for each outlet. Its value ranges between 1 and the value of outletCount. | 1.3.6.1.4.1.13742.4.1.2.2.1.1 | Integer32 (1..256) | not-accessible | current |
| outletLabel OBJECT-TYPE A textual string containing information about the outlet. | 1.3.6.1.4.1.13742.4.1.2.2.1.2 | DisplayString | read-write | current |
| outletOperationalState OBJECT-TYPE A value for each outlet which describes the operational state of the outlet. It is also used to set the operational state of the outlet | 1.3.6.1.4.1.13742.4.1.2.2.1.3 | INTEGER {error(-1), off(0), on(1), cycling(2)} | read-write | current |
| outletCurrent OBJECT-TYPE A unique value for the current sensor attached to the outlet. This value is reported in milliamps (1/1000th of an amp) | 1.3.6.1.4.1.13742.4.1.2.2.1.4 | MilliAmps | read-only | current |
| outletMaxCurrent OBJECT-TYPE A unique value for the max. current sensor attached to the outlet. This value is reported in milliamps (1/1000th of an amp) | 1.3.6.1.4.1.13742.4.1.2.2.1.5 | MilliAmps | read-only | current |
| outletVoltage OBJECT-TYPE A unique value for the voltage sensor attached to the outlet.This value is reported in millivolts (1/1000th of a volt) | 1.3.6.1.4.1.13742.4.1.2.2.1.6 | MilliVolts | read-only | current |
| outletActivePower OBJECT-TYPE A unique value for the active power sensor attached to the outlet. This value is reported in Watts. | 1.3.6.1.4.1.13742.4.1.2.2.1.7 | Watts | read-only | current |
| outletApparentPower OBJECT-TYPE A unique value for the apparent power sensor attached to the outlet. This value is reported in Volt-Amps | 1.3.6.1.4.1.13742.4.1.2.2.1.8 | VoltAmps | read-only | current |
| outletPowerFactor OBJECT-TYPE A unique value for the power factor of the outlet. The reading represents a percentage in the range of 0% to 100%. | 1.3.6.1.4.1.13742.4.1.2.2.1.9 | PowerFactorPercentage | read-only | current |
| outletCurrentUpperWarning OBJECT-TYPE The value of the upper warning (non-critical) current threshold for the outlet. This value is reported in milliamps (1/1000th of an amp) | 1.3.6.1.4.1.13742.4.1.2.2.1.20 | MilliAmps | read-write | current |
| outletCurrentUpperCritical OBJECT-TYPE The value of the upper critical current threshold for the outlet. This value is reported in milliamps (1/1000th of an amp) | 1.3.6.1.4.1.13742.4.1.2.2.1.21 | MilliAmps | read-write | current |
| outletCurrentLowerWarning OBJECT-TYPE The value of the lower warning (non-critical) current threshold for the outlet. This value is reported in milliamps (1/1000th of an amp) | 1.3.6.1.4.1.13742.4.1.2.2.1.22 | MilliAmps | read-write | current |
| outletCurrentLowerCritical OBJECT-TYPE The value of the lower critical current threshold for the outlet. This value is reported in milliamps (1/1000th of an amp) | 1.3.6.1.4.1.13742.4.1.2.2.1.23 | MilliAmps | read-write | current |
| outletCurrentHysteresis OBJECT-TYPE The hysteresis used for deassertions. This value is reported in milliamps (1/1000th of an amp) | 1.3.6.1.4.1.13742.4.1.2.2.1.24 | Unsigned32 | read-write | current |
| outletCurrentRating OBJECT-TYPE The current rating of the outlet. This value is reported in milliamps (1/1000th of an amp) | 1.3.6.1.4.1.13742.4.1.2.2.1.30 | MilliAmps | read-only | current |
| outletWattHours OBJECT-TYPE The value of the cumulative active energy for this outlet. This value is reported in WattHours | 1.3.6.1.4.1.13742.4.1.2.2.1.31 | WattHours | read-only | current |
| unit OBJECT-IDENTITY | 1.3.6.1.4.1.13742.4.1.3 | |||
| unitReadings OBJECT-IDENTITY | 1.3.6.1.4.1.13742.4.1.3.1 | |||
| unitCurrent OBJECT-TYPE The value for the unit's current sensor in millamps.This object is deprecated in favour of lineCurrent corresponding to lineCurrentLabel = L1 | 1.3.6.1.4.1.13742.4.1.3.1.1 | MilliAmps | read-only | deprecated |
| unitVoltage OBJECT-TYPE The value for the unit's voltage sensor in millivolts.This object is deprecated in favour of lineVoltage corresponding to lineVoltageLabel = L1 | 1.3.6.1.4.1.13742.4.1.3.1.2 | MilliVolts | read-only | deprecated |
| unitActivePower OBJECT-TYPE The value for the unit's active power in watts.This object is deprecated in favour of inletTable.inletActivePower | 1.3.6.1.4.1.13742.4.1.3.1.3 | Watts | read-only | deprecated |
| unitApparentPower OBJECT-TYPE The value for the unit's apparent power in volt-amps. This object is deprecated in favour of inletTable.inletApparentPower | 1.3.6.1.4.1.13742.4.1.3.1.4 | VoltAmps | read-only | deprecated |
| unitCpuTemp OBJECT-TYPE The value for the unit's CPU temperature sensor in tenth degrees celsius. | 1.3.6.1.4.1.13742.4.1.3.1.5 | TenthDegreesCelsius | read-only | current |
| unitVoltageLowerWarning OBJECT-TYPE The value of the lower warning (non-critical) unit level voltage threshold.This object is deprecated in favour of unitOrLineVoltageLowerWarning | 1.3.6.1.4.1.13742.4.1.3.1.60 | MilliVolts | read-write | deprecated |
| unitVoltageLowerCritical OBJECT-TYPE The value of the lower critical unit level voltage threshold.This object is deprecated in favour of unitOrLineVoltageLowerCritical | 1.3.6.1.4.1.13742.4.1.3.1.61 | MilliVolts | read-write | deprecated |
| unitVoltageUpperWarning OBJECT-TYPE The value of the upper warning (non-critical) unit level voltage threshold.This object is deprecated in favour of unitOrLineVoltageUpperWarning | 1.3.6.1.4.1.13742.4.1.3.1.62 | MilliVolts | read-write | deprecated |
| unitVoltageUpperCritical OBJECT-TYPE The value of the upper critical unit level voltage threshold.This object is deprecated in favour of unitOrLineVoltageUpperCritical | 1.3.6.1.4.1.13742.4.1.3.1.63 | MilliVolts | read-write | deprecated |
| unitCurrentUpperWarning OBJECT-TYPE The value of the upper warning (non-critical) unit level current threshold.This object is deprecated in favour of unitOrLineCurrentUpperWarning | 1.3.6.1.4.1.13742.4.1.3.1.70 | MilliAmps | read-write | deprecated |
| unitCurrentUpperCritical OBJECT-TYPE The value of the upper critical unit level current threshold. NOTE: This particular threshold is NOT settable. This object is deprecated in favour of unitOrLineCurrentUpperCritica | 1.3.6.1.4.1.13742.4.1.3.1.71 | MilliAmps | read-only | deprecated |
| unitTempLowerWarning OBJECT-TYPE The value of the lower warning (non-critical) unit level temperature threshold. | 1.3.6.1.4.1.13742.4.1.3.1.80 | DegreesCelsius | read-write | current |
| unitTempLowerCritical OBJECT-TYPE The value of the lower critical unit level temperature threshold. | 1.3.6.1.4.1.13742.4.1.3.1.81 | DegreesCelsius | read-write | current |
| unitTempUpperWarning OBJECT-TYPE The value of the upper warning (non-critical) unit level temperature threshold. | 1.3.6.1.4.1.13742.4.1.3.1.82 | DegreesCelsius | read-write | current |
| unitTempUpperCritical OBJECT-TYPE The value of the upper critical unit level temperature threshold. | 1.3.6.1.4.1.13742.4.1.3.1.83 | DegreesCelsius | read-write | current |
| currentUnbalance OBJECT-TYPE A string displaying the current unbalance in percent. It will have the value NA if the PX is not a 3-phase unit (inletPoleCount = 1),or the feature is disabled (currentUnbalanceSupport = 'No'), or the average of the line currents is zero (inletPoleCurrent = 0 for 1 <= inlePoleIndex <= 3) | 1.3.6.1.4.1.13742.4.1.3.1.84 | DisplayString | read-only | current |
| currentUnbalanceUpperWarning OBJECT-TYPE The value of the upper warning (non-critical) current unbalance threshold. | 1.3.6.1.4.1.13742.4.1.3.1.85 | Percentage | read-write | current |
| currentUnbalanceUpperCritical OBJECT-TYPE The value of the upper critical current Unbalance threshold. | 1.3.6.1.4.1.13742.4.1.3.1.86 | Percentage | read-write | current |
| unitOrLineVoltageLowerWarning OBJECT-TYPE The value of the lower warning (non-critical) unit level voltage threshold. | 1.3.6.1.4.1.13742.4.1.3.1.90 | MilliVolts | read-write | current |
| unitOrLineVoltageLowerCritical OBJECT-TYPE The value of the lower critical unit level voltage threshold. | 1.3.6.1.4.1.13742.4.1.3.1.91 | MilliVolts | read-write | current |
| unitOrLineVoltageUpperWarning OBJECT-TYPE The value of the upper warning (non-critical) unit level voltage | 1.3.6.1.4.1.13742.4.1.3.1.92 | MilliVolts | read-write | current |
| unitOrLineVoltageUpperCritical OBJECT-TYPE The value of the upper critical unit level voltage threshold. | 1.3.6.1.4.1.13742.4.1.3.1.93 | MilliVolts | read-write | current |
| unitOrLineCurrentUpperWarning OBJECT-TYPE The value of the upper warning (non-critical) unit level current threshold | 1.3.6.1.4.1.13742.4.1.3.1.94 | MilliAmps | read-write | current |
| unitOrLineCurrentUpperCritical OBJECT-TYPE The value of the upper critical unit level current threshold. | 1.3.6.1.4.1.13742.4.1.3.1.95 | MilliAmps | read-write | current |
| neutralCurrentUpperWarning OBJECT-TYPE This object has an invalid value if inletPoleCount is not equal to 4. If inletPoleCount = 4, then it is the value of the upper warning (non-critical) threshold for the neutral current | 1.3.6.1.4.1.13742.4.1.3.1.96 | MilliAmps | read-write | current |
| neutralCurrentUpperCritical OBJECT-TYPE This object has an invalid value if inletPoleCount is not equal to 4. If inletPoleCount = 4, then it is the value of the upper critical threshold for the neutral current. | 1.3.6.1.4.1.13742.4.1.3.1.97 | MilliAmps | read-write | current |
| unitOrLineCurrentHysteresis OBJECT-TYPE The hysteresis used for deassertions. This value is reported in milliamps (1/1000th of an amp) | 1.3.6.1.4.1.13742.4.1.3.1.98 | Unsigned32 | read-write | current |
| unitOrLineVoltageHysteresis OBJECT-TYPE The hysteresis used for deassertions. This value is reported in millivolts (1/1000th of a volt) | 1.3.6.1.4.1.13742.4.1.3.1.99 | Unsigned32 | read-write | current |
| unitTempHysteresis OBJECT-TYPE The hysteresis used for deassertions | 1.3.6.1.4.1.13742.4.1.3.1.100 | Unsigned32 | read-write | current |
| currentUnbalanceHysteresis OBJECT-TYPE The hysteresis used for deassertions | 1.3.6.1.4.1.13742.4.1.3.1.101 | Unsigned32 | read-write | current |
| lineCurrents OBJECT-IDENTITY | 1.3.6.1.4.1.13742.4.1.4 | |||
| lineCurrentCount OBJECT-TYPE The number of line currents (1 for single phase, 3 for 3 phase Delta-wired, 4 for 3 phase WYE wired).This object is deprecated in favour of inletPoleTable | 1.3.6.1.4.1.13742.4.1.4.1 | Integer32 | read-only | deprecated |
| lineCurrentTable OBJECT-TYPE A list of line input entries. The number of entries is given by the value of lineInputCount. This object is deprecated in favour of inletPoleTable | 1.3.6.1.4.1.13742.4.1.4.2 | not-accessible | deprecated | |
| lineCurrentEntry OBJECT-TYPE An entry containing values and threshold settings for a particular line input.This object is deprecated in favour of inletPoleTable | 1.3.6.1.4.1.13742.4.1.4.2.1 | not-accessible | deprecated | |
| lineCurrentIndex OBJECT-TYPE A unique value for each line input. Its value ranges between 1 and lineInputCount. This object is deprecated in favour of inletPoleTable | 1.3.6.1.4.1.13742.4.1.4.2.1.1 | Integer32 (1..256) | not-accessible | deprecated |
| lineCurrentLabel OBJECT-TYPE A string identifying the Line For Single Phase: L1 For 3phase Delta wired outlets: L1, L2, L3 For 3phase WYE Wired Outlets: L1, L2, L3, N This object is deprecated in favour of inletPoleTable | 1.3.6.1.4.1.13742.4.1.4.2.1.2 | DisplayString | read-only | deprecated |
| lineCurrent OBJECT-TYPE The value of the current reported in MilliAmps. This object is deprecated in favour of inletPoleTable | 1.3.6.1.4.1.13742.4.1.4.2.1.3 | MilliAmps | read-only | deprecated |
| circuitBreaker OBJECT-IDENTITY | 1.3.6.1.4.1.13742.4.1.5 | |||
| circuitBreakerCount OBJECT-TYPE The number of circuit breakers. | 1.3.6.1.4.1.13742.4.1.5.1 | Integer32 | read-only | current |
| circuitBreakerTable OBJECT-TYPE A list of line input entries. The number of entries is given by the value of lineInputCount. | 1.3.6.1.4.1.13742.4.1.5.2 | not-accessible | current | |
| circuitBreakerEntry OBJECT-TYPE An entry containing values and threshold settings for a particular line input. | 1.3.6.1.4.1.13742.4.1.5.2.1 | not-accessible | current | |
| circuitBreakerIndex OBJECT-TYPE A unique value for each circuit breaker. Its value ranges between 1 and circuitBreakerCount. | 1.3.6.1.4.1.13742.4.1.5.2.1.1 | Integer32 (1..256) | not-accessible | current |
| circuitBreakerLabel OBJECT-TYPE A string identifying the circuit breaker | 1.3.6.1.4.1.13742.4.1.5.2.1.2 | DisplayString | read-only | current |
| circuitBreakerState OBJECT-TYPE The value for the circuit breaker state . | 1.3.6.1.4.1.13742.4.1.5.2.1.3 | INTEGER {ok(0), tripped(1)} | read-only | current |
| circuitBreakerCurrentRating OBJECT-TYPE The value of the circuit breaker current rating in MilliAmps. | 1.3.6.1.4.1.13742.4.1.5.2.1.4 | MilliAmps | read-only | current |
| circuitBreakerCurrent OBJECT-TYPE The value of the current reported in MilliAmps. | 1.3.6.1.4.1.13742.4.1.5.2.1.5 | MilliAmps | read-only | current |
| circuitBreakerCurrentUpperWarning OBJECT-TYPE The value of the upper warning (non-critical) threshold. | 1.3.6.1.4.1.13742.4.1.5.2.1.7 | MilliAmps | read-write | current |
| circuitBreakerCurrentUpperCritical OBJECT-TYPE The value of the upper critical threshold. | 1.3.6.1.4.1.13742.4.1.5.2.1.9 | MilliAmps | read-write | current |
| circuitBreakerCurrentHysteresis OBJECT-TYPE The hysteresis used for deassertions reported in milliamps (1/1000th of an amp) | 1.3.6.1.4.1.13742.4.1.5.2.1.10 | Unsigned32 | read-write | current |
| lineVoltages OBJECT-IDENTITY | 1.3.6.1.4.1.13742.4.1.6 | |||
| lineVoltageCount OBJECT-TYPE The number of line voltages (1 for single phase, 3 for 3 phase. This object is deprecated in favour of inletPoleTable | 1.3.6.1.4.1.13742.4.1.6.1 | Integer32 | read-only | deprecated |
| lineVoltageTable OBJECT-TYPE A list of line input entries. The number of entries is given by the value of lineInputCount. This object is deprecated in favour of linletPoleTable | 1.3.6.1.4.1.13742.4.1.6.2 | not-accessible | deprecated | |
| lineVoltageEntry OBJECT-TYPE An entry containing values and threshold settings for a particular line input. This object is deprecated in favour of inletPoleTable | 1.3.6.1.4.1.13742.4.1.6.2.1 | not-accessible | deprecated | |
| lineVoltageIndex OBJECT-TYPE A unique value for each line input. Its value ranges between 1 and lineInputCount. This object is deprecated in favour of inletPoleTable | 1.3.6.1.4.1.13742.4.1.6.2.1.1 | Integer32 (1..256) | not-accessible | deprecated |
| lineVoltageLabel OBJECT-TYPE A string identifying the Line For Single Phase: L1 For 3phase Delta-wired: L1-L2, L2-L3, L3-L1 For 3phase Wye-wired: L1-N, L2-N, L3-N This object is deprecated in favour of inletPoleTable | 1.3.6.1.4.1.13742.4.1.6.2.1.2 | DisplayString | read-only | deprecated |
| lineVoltage OBJECT-TYPE The value of the voltage reported in MilliVolts. This object is deprecated in favour of inletPoleTable | 1.3.6.1.4.1.13742.4.1.6.2.1.3 | MilliVolts | read-only | deprecated |
| dataLog OBJECT-IDENTITY | 1.3.6.1.4.1.13742.4.1.7 | |||
| dataLogCount OBJECT-TYPE The number of entries in the dataLog table which is a circular buffer. | 1.3.6.1.4.1.13742.4.1.7.1 | Integer32 | read-only | current |
| dataLogLatestIndex OBJECT-TYPE The index of the latest (most recent) entry in dataLogTable . | 1.3.6.1.4.1.13742.4.1.7.2 | Integer32 (1..256) | read-only | current |
| dataLogTable OBJECT-TYPE A list of data log entries. The number of entries is given by the value of dataLogCount. | 1.3.6.1.4.1.13742.4.1.7.3 | not-accessible | current | |
| dataLogEntry OBJECT-TYPE An entry in the dataLog buffer containing the unit data collected at the instant specified by dataLogTimeStamp | 1.3.6.1.4.1.13742.4.1.7.3.1 | not-accessible | current | |
| dataLogIndex OBJECT-TYPE A unique value for each data sample. Its value ranges between 1 and dataLogCount . | 1.3.6.1.4.1.13742.4.1.7.3.1.1 | Integer32 (1..256) | not-accessible | current |
| dataLogTimeStamp OBJECT-TYPE The time when the data was collected. It is measured in seconds relative to January 1, 1970 (midnight UTC/GMT), i.e a value of 0 indicates January 1, 1970 (midnight UTC/GMT) | 1.3.6.1.4.1.13742.4.1.7.3.1.2 | Unsigned32 | read-only | current |
| dataLogActivePower OBJECT-TYPE The value for the pdu's active power sensor in watts. This has been deprecated in favor of dataLogAvgActivePower, dataLogMaxActivePower,dataLogMinActivePower | 1.3.6.1.4.1.13742.4.1.7.3.1.3 | Watts | read-only | deprecated |
| dataLogApparentPower OBJECT-TYPE The value for the pdu's apparent power sensor in volt-amps. This has been deprecated in favor of dataLogAvgApparentPower, dataLogMaxApparentPower,dataLogMinApparentPower | 1.3.6.1.4.1.13742.4.1.7.3.1.4 | VoltAmps | read-only | deprecated |
| dataLogAvgActivePower OBJECT-TYPE The average active power for this measurement period | 1.3.6.1.4.1.13742.4.1.7.3.1.5 | Watts | read-only | current |
| dataLogMaxActivePower OBJECT-TYPE The maximum active power for this measurement period | 1.3.6.1.4.1.13742.4.1.7.3.1.6 | Watts | read-only | current |
| dataLogMinActivePower OBJECT-TYPE The minimum active power for this measurement period | 1.3.6.1.4.1.13742.4.1.7.3.1.7 | Watts | read-only | current |
| dataLogAvgApparentPower OBJECT-TYPE The average apparent power for this measurement period | 1.3.6.1.4.1.13742.4.1.7.3.1.8 | VoltAmps | read-only | current |
| dataLogMaxApparentPower OBJECT-TYPE The maximum apparent power for this measurement period | 1.3.6.1.4.1.13742.4.1.7.3.1.9 | VoltAmps | read-only | current |
| dataLogMinApparentPower OBJECT-TYPE The minimum apparent power for this measurement period | 1.3.6.1.4.1.13742.4.1.7.3.1.10 | VoltAmps | read-only | current |
| dataLogOutlet OBJECT-IDENTITY | 1.3.6.1.4.1.13742.4.1.10 | |||
| dataLogOutletTable OBJECT-TYPE A list of outlet entries. The number of entries is given by the value of outletCount. | 1.3.6.1.4.1.13742.4.1.10.1 | not-accessible | current | |
| dataLogOutletEntry OBJECT-TYPE An entry in the data log containing outlet level data for a particular outlet. | 1.3.6.1.4.1.13742.4.1.10.1.1 | not-accessible | current | |
| dataLogOutletIndex OBJECT-TYPE A unique value for each outlet. Its value ranges between 1 and the value of outletCount. | 1.3.6.1.4.1.13742.4.1.10.1.1.1 | Integer32 (1..256) | not-accessible | current |
| dataLogOutletCurrent OBJECT-TYPE A unique value for the current sensor attached to the outlet. This value is reported in milliamps (1/1000th of an amp) This has been deprecated in favor of dataLogAvgOutletCurrent , dataLogMaxOutletCurrent ,dataLogMinOutletCurrent | 1.3.6.1.4.1.13742.4.1.10.1.1.2 | MilliAmps | read-only | deprecated |
| dataLogOutletVoltage OBJECT-TYPE A unique value for the voltage sensor attached to the outlet.This value is reported in millivolts (1/1000th of a volt) This has been deprecated in favor of dataLogAvgOutletVoltage , dataLogMaxOutletVoltage ,dataLogMinOutletVoltage | 1.3.6.1.4.1.13742.4.1.10.1.1.3 | MilliVolts | read-only | deprecated |
| dataLogOutletPowerFactor OBJECT-TYPE A unique value for the power factor of the outlet. The reading represents a percentage in the range of 0% to 100%. This has been deprecated in favor of dataLogAvgOutletPowerFactor, dataLogMaxOutletPowerFactor,dataLogMinOutletPowerFactor | 1.3.6.1.4.1.13742.4.1.10.1.1.4 | PowerFactorPercentage | read-only | deprecated |
| dataLogOutletOnTime OBJECT-TYPE The amount of time since this outlet was last switched on. This value is reported in seconds. | 1.3.6.1.4.1.13742.4.1.10.1.1.5 | Unsigned32 | read-only | current |
| dataLogOutletWattHours OBJECT-TYPE The cumulative Active Energy for this outlet. This value is reported in WattHours This has been deprecated in favor of dataLogAvgOutletWattHours , dataLogMaxOutletWattHours ,dataLogMinOutletWattHours | 1.3.6.1.4.1.13742.4.1.10.1.1.6 | WattHours | read-only | deprecated |
| dataLogAvgOutletCurrent OBJECT-TYPE The Average value for the measurement period: A unique value for the current sensor attached to the outlet. This value is reported in milliamps (1/1000th of an amp) | 1.3.6.1.4.1.13742.4.1.10.1.1.7 | MilliAmps | read-only | current |
| dataLogMaxOutletCurrent OBJECT-TYPE The Maximum value for the measurement period: A unique value for the current sensor attached to the outlet. This value is reported in milliamps (1/1000th of an amp) | 1.3.6.1.4.1.13742.4.1.10.1.1.8 | MilliAmps | read-only | current |
| dataLogMinOutletCurrent OBJECT-TYPE The Minimum value for the measurement period: A unique value for the current sensor attached to the outlet. This value is reported in milliamps (1/1000th of an amp) | 1.3.6.1.4.1.13742.4.1.10.1.1.9 | MilliAmps | read-only | current |
| dataLogAvgOutletVoltage OBJECT-TYPE The Average value for the measurement period: A unique value for the voltage sensor attached to the outlet.This value is reported in millivolts (1/1000th of a volt) | 1.3.6.1.4.1.13742.4.1.10.1.1.10 | MilliVolts | read-only | current |
| dataLogMaxOutletVoltage OBJECT-TYPE The Maximum value for the measurement period: A unique value for the voltage sensor attached to the outlet.This value is reported in millivolts (1/1000th of a volt) | 1.3.6.1.4.1.13742.4.1.10.1.1.11 | MilliVolts | read-only | current |
| dataLogMinOutletVoltage OBJECT-TYPE The Minimum value for the measurement period: A unique value for the voltage sensor attached to the outlet.This value is reported in millivolts (1/1000th of a volt) | 1.3.6.1.4.1.13742.4.1.10.1.1.12 | MilliVolts | read-only | current |
| dataLogAvgOutletPowerFactor OBJECT-TYPE The Average value for the measurement period: A unique value for the power factor of the outlet. The reading represents a percentage in the range of 0% to 100% | 1.3.6.1.4.1.13742.4.1.10.1.1.13 | PowerFactorPercentage | read-only | current |
| dataLogMaxOutletPowerFactor OBJECT-TYPE The Maximum value for the measurement period: A unique value for the power factor of the outlet. The reading represents a percentage in the range of 0% to 100% | 1.3.6.1.4.1.13742.4.1.10.1.1.14 | PowerFactorPercentage | read-only | current |
| dataLogMinOutletPowerFactor OBJECT-TYPE The Minimum value for the measurement period: A unique value for the power factor of the outlet. The reading represents a percentage in the range of 0% to 100% | 1.3.6.1.4.1.13742.4.1.10.1.1.15 | PowerFactorPercentage | read-only | current |
| dataLogAvgOutletWattHours OBJECT-TYPE The Average value for the measurement period: The cumulative Active Energy for this outlet. This value is reported in WattHours | 1.3.6.1.4.1.13742.4.1.10.1.1.16 | WattHours | read-only | current |
| dataLogMaxOutletWattHours OBJECT-TYPE The Maximum value for the measurement period: The cumulative Active Energy for this outlet. This value is reported in WattHours | 1.3.6.1.4.1.13742.4.1.10.1.1.17 | WattHours | read-only | current |
| dataLogMinOutletWattHours OBJECT-TYPE The Minimum value for the measurement period: The cumulative Active Energy for this outlet. This value is reported in WattHours | 1.3.6.1.4.1.13742.4.1.10.1.1.18 | WattHours | read-only | current |
| dataLogInlet OBJECT-IDENTITY | 1.3.6.1.4.1.13742.4.1.12 | |||
| dataLogInletTable OBJECT-TYPE A list of inlet entries. The number of entries is given by the value of inletCount. | 1.3.6.1.4.1.13742.4.1.12.2 | not-accessible | current | |
| dataLogInletEntry OBJECT-TYPE An inlet entry containing objects at the for a particular outlet. | 1.3.6.1.4.1.13742.4.1.12.2.1 | not-accessible | current | |
| dataLogInletIndex OBJECT-TYPE A unique value for each inlet. Its value ranges between 1 and the value of inletCount. | 1.3.6.1.4.1.13742.4.1.12.2.1.1 | Integer32 (1..256) | not-accessible | current |
| dataLogInletCurrentUnbalance OBJECT-TYPE A string displaying the current unbalance in percent. It will have the value NA if the feature is disabled, the PX is not a 3-phase unit,or the average of the line currents is zero This has been deprecated in favor of dataLogAvgInletCurrentUnbalance, dataLogMaxInletCurrentUnbalance, dataLogMinInletCurrentUnbalance | 1.3.6.1.4.1.13742.4.1.12.2.1.10 | DisplayString | read-only | deprecated |
| dataLogInletActivePower OBJECT-TYPE The active power for the inlet This value is reported in Watts. This has been deprecated in favor of dataLogAvgInletActivePower, dataLogMaxInletActivePower, dataLogMinInletActivePower | 1.3.6.1.4.1.13742.4.1.12.2.1.11 | Watts | read-only | deprecated |
| dataLogInletApparentPower OBJECT-TYPE The apparent power for the inlet. This value is reported in Volt-Amps This has been deprecated in favor of dataLogAvgInletApparentPower, dataLogMaxInletApparentPower, dataLogMinInletApparentPower | 1.3.6.1.4.1.13742.4.1.12.2.1.12 | VoltAmps | read-only | deprecated |
| dataLogInletActiveEnergy OBJECT-TYPE The value of the cumulative active energy for this inlet. This value is reported in WattHours This has been deprecated in favor of dataLogAvgInletActiveEnergy, dataLogMaxInletActiveEnergy, dataLogMinInletActiveEnergy | 1.3.6.1.4.1.13742.4.1.12.2.1.13 | WattHours | read-only | deprecated |
| dataLogAvgInletCurrentUnbalance OBJECT-TYPE The average value of the current unbalance for this measurement period A string displaying the current unbalance in percent. It will have the value NA if the feature is disabled, the PX is not a 3-phase unit,or the average of the line currents is zero | 1.3.6.1.4.1.13742.4.1.12.2.1.14 | DisplayString | read-only | current |
| dataLogMaxInletCurrentUnbalance OBJECT-TYPE The Maximum value for the measurement period: A string displaying the current unbalance in percent. It will have the value NA if the feature is disabled, the PX is not a 3-phase unit,or the average of the line currents is zero | 1.3.6.1.4.1.13742.4.1.12.2.1.15 | DisplayString | read-only | current |
| dataLogMinInletCurrentUnbalance OBJECT-TYPE The Minimum value for the measurement period: A string displaying the current unbalance in percent. It will have the value NA if the feature is disabled, the PX is not a 3-phase unit,or the average of the line currents is zero | 1.3.6.1.4.1.13742.4.1.12.2.1.16 | DisplayString | read-only | current |
| dataLogAvgInletActivePower OBJECT-TYPE The Average value for the measurement period: The active power for the inlet This value is reported in Watts. | 1.3.6.1.4.1.13742.4.1.12.2.1.17 | Watts | read-only | current |
| dataLogMaxInletActivePower OBJECT-TYPE The Maximum value for the measurement period: The active power for the inlet This value is reported in Watts. | 1.3.6.1.4.1.13742.4.1.12.2.1.18 | Watts | read-only | current |
| dataLogMinInletActivePower OBJECT-TYPE The Minimum value for the measurement period: The active power for the inlet This value is reported in Watts. | 1.3.6.1.4.1.13742.4.1.12.2.1.19 | Watts | read-only | current |
| dataLogAvgInletApparentPower OBJECT-TYPE The Average value for the measurement period: The apparent power for the inlet. This value is reported in Volt-Amps | 1.3.6.1.4.1.13742.4.1.12.2.1.20 | VoltAmps | read-only | current |
| dataLogMaxInletApparentPower OBJECT-TYPE The Maximum value for the measurement period: The apparent power for the inlet. This value is reported in Volt-Amps | 1.3.6.1.4.1.13742.4.1.12.2.1.21 | VoltAmps | read-only | current |
| dataLogMinInletApparentPower OBJECT-TYPE The Minimum value for the measurement period: The apparent power for the inlet. This value is reported in Volt-Amps | 1.3.6.1.4.1.13742.4.1.12.2.1.22 | VoltAmps | read-only | current |
| dataLogAvgInletActiveEnergy OBJECT-TYPE The Average value for the measurement period: The value of the cumulative active energy for this inlet. This value is reported in WattHours | 1.3.6.1.4.1.13742.4.1.12.2.1.23 | WattHours | read-only | current |
| dataLogMaxInletActiveEnergy OBJECT-TYPE The Maximum value for the measurement period: The value of the cumulative active energy for this inlet. This value is reported in WattHours | 1.3.6.1.4.1.13742.4.1.12.2.1.24 | WattHours | read-only | current |
| dataLogMinInletActiveEnergy OBJECT-TYPE The Minimum value for the measurement period: The value of the cumulative active energy for this inlet. This value is reported in WattHours | 1.3.6.1.4.1.13742.4.1.12.2.1.25 | WattHours | read-only | current |
| dataLogInletPole OBJECT-IDENTITY | 1.3.6.1.4.1.13742.4.1.13 | |||
| dataLogInletPoleTable OBJECT-TYPE A list of line input entries. The number of entries is given by the value of dataLoginletTable(dataLogInletIndex).inletPoleCount. | 1.3.6.1.4.1.13742.4.1.13.1 | not-accessible | current | |
| dataLogInletPoleEntry OBJECT-TYPE An entry in the data log containing input line values for a particular input line. | 1.3.6.1.4.1.13742.4.1.13.1.1 | not-accessible | current | |
| dataLogInletPoleIndex OBJECT-TYPE A unique value for each line input. Its value ranges between 1 and lineCurrentCount. | 1.3.6.1.4.1.13742.4.1.13.1.1.1 | Integer32 (1..256) | not-accessible | current |
| dataLogInletPoleCurrent OBJECT-TYPE The value of the current reported in MilliAmps. For Single Phase: Input Line Current For 3phase Delta-wired: Current for L1, L2, L3 For 3phase WYE-wired: Current for L1, L2, L3, N This has been deprecated in favor of dataLogAvgInletPoleCurrent, dataLogMaxInletPoleCurrent, dataLogMinInletPoleCurrent | 1.3.6.1.4.1.13742.4.1.13.1.1.2 | MilliAmps | read-only | deprecated |
| dataLogInletPoleVoltage OBJECT-TYPE The value of the voltage reported in MilliVolts. For Single Phase: Input Line Voltage For 3phase Delta-wired: Voltages for L1-L2, L2-L3, L3-L1 For 3phase WYE-wired: Voltages for L1-N, L2-N, L3-N This has been deprecated in favor of dataLogAvgInletPoleVoltage, dataLogMaxInletPoleVoltage, dataLogMinInletPoleVoltage | 1.3.6.1.4.1.13742.4.1.13.1.1.3 | MilliVolts | read-only | deprecated |
| dataLogAvgInletPoleCurrent OBJECT-TYPE The Average value for the measurement period: The value of the current reported in MilliAmps. For Single Phase: Input Line Current For 3phase Delta-wired: Current for L1, L2, L3 For 3phase WYE-wired: Current for L1, L2, L3, N | 1.3.6.1.4.1.13742.4.1.13.1.1.4 | MilliAmps | read-only | current |
| dataLogMaxInletPoleCurrent OBJECT-TYPE The Maximum value for the measurement period: The value of the current reported in MilliAmps. For Single Phase: Input Line Current For 3phase Delta-wired: Current for L1, L2, L3 For 3phase WYE-wired: Current for L1, L2, L3, N | 1.3.6.1.4.1.13742.4.1.13.1.1.5 | MilliAmps | read-only | current |
| dataLogMinInletPoleCurrent OBJECT-TYPE The Minimum value for the measurement period: The value of the current reported in MilliAmps. For Single Phase: Input Line Current For 3phase Delta-wired: Current for L1, L2, L3 For 3phase WYE-wired: Current for L1, L2, L3, N | 1.3.6.1.4.1.13742.4.1.13.1.1.6 | MilliAmps | read-only | current |
| dataLogAvgInletPoleVoltage OBJECT-TYPE The Average value for the measurement period: The value of the voltage reported in MilliVolts. For Single Phase: Input Line Voltage For 3phase Delta-wired: Voltages for L1-L2, L2-L3, L3-L1 For 3phase WYE-wired: Voltages for L1-N, L2-N, L3-N | 1.3.6.1.4.1.13742.4.1.13.1.1.7 | MilliVolts | read-only | current |
| dataLogMaxInletPoleVoltage OBJECT-TYPE The Maximum value for the measurement period: The value of the voltage reported in MilliVolts. For Single Phase: Input Line Voltage For 3phase Delta-wired: Voltages for L1-L2, L2-L3, L3-L1 For 3phase WYE-wired: Voltages for L1-N, L2-N, L3-N | 1.3.6.1.4.1.13742.4.1.13.1.1.8 | MilliVolts | read-only | current |
| dataLogMinInletPoleVoltage OBJECT-TYPE The Minimum value for the measurement period: The value of the voltage reported in MilliVolts. For Single Phase: Input Line Voltage For 3phase Delta-wired: Voltages for L1-L2, L2-L3, L3-L1 For 3phase WYE-wired: Voltages for L1-N, L2-N, L3-N | 1.3.6.1.4.1.13742.4.1.13.1.1.9 | MilliVolts | read-only | current |
| dataLogAvgInletPoleActivePower OBJECT-TYPE This object has a valid value only for inline meters. If inlineMeter = 'No', then the value is invalid; In all other cases, it is the the Average value of the active power for the measurement period. The value is reported in Watts. | 1.3.6.1.4.1.13742.4.1.13.1.1.10 | Watts | read-only | current |
| dataLogMaxInletPoleActivePower OBJECT-TYPE This object has a valid value only for inline meters. If inlineMeter = 'No', then the value is invalid; In all other cases, it is the the Maximum value of the active power for the measurement period. The value is reported in Watts. | 1.3.6.1.4.1.13742.4.1.13.1.1.11 | Watts | read-only | current |
| dataLogMinInletPoleActivePower OBJECT-TYPE This object has a valid value only for inline meters. If inlineMeter = 'No', then the value is invalid; In all other cases, it is the the Minimum value of the active power for the measurement period. The value is reported in Watts. | 1.3.6.1.4.1.13742.4.1.13.1.1.12 | Watts | read-only | current |
| dataLogAvgInletPoleApparentPower OBJECT-TYPE This object has a valid value only for inline meters. If inlineMeter = 'No', then the value is invalid; In all other cases, it is the the Average value of the apparent power for the measurement period. The value is reported in Volt-Amps | 1.3.6.1.4.1.13742.4.1.13.1.1.13 | VoltAmps | read-only | current |
| dataLogMaxInletPoleApparentPower OBJECT-TYPE This object has a valid value only for inline meters. If inlineMeter = 'No', then the value is invalid; In all other cases, it is the the Maximum value of the apparent power for the measurement period. The value is reported in Volt-Amps | 1.3.6.1.4.1.13742.4.1.13.1.1.14 | VoltAmps | read-only | current |
| dataLogMinInletPoleApparentPower OBJECT-TYPE This object has a valid value only for inline meters. If inlineMeter = 'No', then the value is invalid; In all other cases, it is the the Minimum value of the apparent power for the measurement period. The value is reported in Volt-Amps | 1.3.6.1.4.1.13742.4.1.13.1.1.15 | VoltAmps | read-only | current |
| dataLogAvgInletPoleActiveEnergy OBJECT-TYPE This object has a valid value only for inline meters. If inlineMeter = 'No', then the value is invalid; In all other cases, it is the the Average value of the active energy for the measurement period. The value is reported in WattHours | 1.3.6.1.4.1.13742.4.1.13.1.1.16 | WattHours | read-only | current |
| dataLogMaxInletPoleActiveEnergy OBJECT-TYPE This object has a valid value only for inline meters. If inlineMeter = 'No', then the value is invalid; In all other cases, it is the the Maximum value of the active energy for the measurement period. The value is reported in WattHours | 1.3.6.1.4.1.13742.4.1.13.1.1.17 | WattHours | read-only | current |
| dataLogMinInletPoleActiveEnergy OBJECT-TYPE This object has a valid value only for inline meters. If inlineMeter = 'No', then the value is invalid; In all other cases, it is the the Minimum value of the active energy for the measurement period. The value is reported in WattHours | 1.3.6.1.4.1.13742.4.1.13.1.1.18 | WattHours | read-only | current |
| dataLogInputLine OBJECT-IDENTITY | 1.3.6.1.4.1.13742.4.1.14 | |||
| dataLogInputLineTable OBJECT-TYPE A list of line input entries. The number of entries is given by the value of lineCurrentCount. This object is deprecated in favour of dataLogInletLineTable | 1.3.6.1.4.1.13742.4.1.14.1 | not-accessible | deprecated | |
| dataLogInputLineEntry OBJECT-TYPE An entry in the data log containing input line values for a particular input line. This object is deprecated in favour of dataLogInletLineTable | 1.3.6.1.4.1.13742.4.1.14.1.1 | not-accessible | deprecated | |
| dataLogInputLineIndex OBJECT-TYPE A unique value for each line input. Its value ranges between 1 and inletTable(inletIndex).inletPoleCount. This object is deprecated in favour of dataLogInletLineTable | 1.3.6.1.4.1.13742.4.1.14.1.1.1 | Integer32 (1..256) | not-accessible | deprecated |
| dataLogInputLineCurrent OBJECT-TYPE The value of the current reported in MilliAmps. For Single Phase: Input Line Current For 3phase Delta-wired: Current for L1, L2, L3 For 3phase WYE-wired: Current for L1, L2, L3, N This object is deprecated in favour of dataLogInletLineTable | 1.3.6.1.4.1.13742.4.1.14.1.1.2 | MilliAmps | read-only | deprecated |
| dataLogInputLineVoltage OBJECT-TYPE The value of the voltage reported in MilliVolts. For Single Phase: Input Line Voltage For 3phase Delta-wired: Voltages for L1-L2, L2-L3, L3-L1 For 3phase WYE-wired: Voltages for L1-N, L2-N, L3-N This object is deprecated in favour of dataLogInletLineTable | 1.3.6.1.4.1.13742.4.1.14.1.1.3 | MilliVolts | read-only | deprecated |
| dataLogCircuitBreaker OBJECT-IDENTITY | 1.3.6.1.4.1.13742.4.1.15 | |||
| dataLogCircuitBreakerTable OBJECT-TYPE A list of circuit breaker entries. The number of entries is given by the value of circuitBreakerCount. | 1.3.6.1.4.1.13742.4.1.15.1 | not-accessible | current | |
| dataLogCircuitBreakerEntry OBJECT-TYPE An entry in the data log containing circuit breaker values | 1.3.6.1.4.1.13742.4.1.15.1.1 | not-accessible | current | |
| dataLogCircuitBreakerIndex OBJECT-TYPE A unique value for each circuit breaker. Its value ranges between 1 and circuitBreakerCount. | 1.3.6.1.4.1.13742.4.1.15.1.1.1 | Integer32 (1..256) | not-accessible | current |
| dataLogCircuitBreakerCurrent OBJECT-TYPE The value of the current reported in MilliAmps. This has been deprecated in favor of dataLogAvgCircuitBreakerCurrent, dataLogMaxOutletCircuitBreakerCurrent, dataLogMinCircuitBreakerCurrent | 1.3.6.1.4.1.13742.4.1.15.1.1.2 | MilliAmps | read-only | deprecated |
| dataLogAvgCircuitBreakerCurrent OBJECT-TYPE The Average value for the measurement period: The value of the current reported in MilliAmps. | 1.3.6.1.4.1.13742.4.1.15.1.1.3 | MilliAmps | read-only | current |
| dataLogMaxCircuitBreakerCurrent OBJECT-TYPE The Maximum value for the measurement period: The value of the current reported in MilliAmps. | 1.3.6.1.4.1.13742.4.1.15.1.1.4 | MilliAmps | read-only | current |
| dataLogMinCircuitBreakerCurrent OBJECT-TYPE The Minimum value for the measurement period: The value of the current reported in MilliAmps. | 1.3.6.1.4.1.13742.4.1.15.1.1.5 | MilliAmps | read-only | current |
| dataLogExternalSensor OBJECT-IDENTITY | 1.3.6.1.4.1.13742.4.1.16 | |||
| dataLogExternalSensorTable OBJECT-TYPE A list of external sensor entries. The number of entries is given by the value of externalSensorCount. | 1.3.6.1.4.1.13742.4.1.16.1 | not-accessible | current | |
| dataLogExternalSensorEntry OBJECT-TYPE An entry in the data log containing external sensor values | 1.3.6.1.4.1.13742.4.1.16.1.1 | not-accessible | current | |
| dataLogExternalSensorIndex OBJECT-TYPE A unique value for each external sensor. Its value ranges between 1 and externalSensorCount. | 1.3.6.1.4.1.13742.4.1.16.1.1.1 | Integer32 (1..256) | not-accessible | current |
| dataLogExternalSensorChanged OBJECT-TYPE Indicates whether there has been a change in the sensor type/subtype/channel number for this sensorID. This can occur if sensorIDs have been reassigned as a result of a GUI operation or a SET operation on reorderexternalSensorTableEntries. Format: SerialNumber=xxxxxxxx; SensorType=dd; SensorSubType=d; ChannelNumber=d SensorSubType and ChannelNumber are present only if NewSensorType=onOff If there was no change from the previous sample, then this string is empty. Examples: Sensor changed to Temperature: SerialNumber=AEI8160083; SensorType=10; Sensor changed to onOff/SmokeDetection: SerialNumber=AEI8160083; SensorType=14; SensorSubType= 18; ChannelNumber=1 Sensor Channel Number changed: SerialNumber=AEI8160083; SensorType=14; SensorSubType= 18; ChannelNumber=2 Sensor SubType changed: SerialNumber=AEI8160083; SensorType=14; SensorSubType= 19; ChannelNumber=2 | 1.3.6.1.4.1.13742.4.1.16.1.1.2 | DisplayString | read-only | current |
| dataLogExternalSensorState OBJECT-TYPE The sensor state. | 1.3.6.1.4.1.13742.4.1.16.1.1.3 | StateOfSensorEnumeration | read-only | current |
| dataLogAvgExternalSensorValue OBJECT-TYPE The Average of the sensor values Does not apply (gets will return 0) to onOff, trip, vibration, waterDetection, smokeDetection sensors. This value is not valid if dataLogExternalSensorState is unavailable(-1). | 1.3.6.1.4.1.13742.4.1.16.1.1.4 | Integer32 | read-only | current |
| dataLogMaxExternalSensorValue OBJECT-TYPE The Maximum of the sensor values Does not apply (gets will return 0) to onOff, trip, vibration, waterDetection, smokeDetection sensors This value is not valid if dataLogExternalSensorState is unavailable(-1). | 1.3.6.1.4.1.13742.4.1.16.1.1.5 | Integer32 | read-only | current |
| dataLogMinExternalSensorValue OBJECT-TYPE The Minimum of the sensor values. Does not apply (gets will return 0) to onOff, trip, vibration, waterDetection, smokeDetection sensors This value is not valid if dataLogExternalSensorState is unavailable(-1). | 1.3.6.1.4.1.13742.4.1.16.1.1.6 | Integer32 | read-only | current |
| inlets OBJECT-IDENTITY | 1.3.6.1.4.1.13742.4.1.20 | |||
| inletCount OBJECT-TYPE The number of inlets present on this pdu. | 1.3.6.1.4.1.13742.4.1.20.1 | Integer32 | read-only | current |
| inletTable OBJECT-TYPE A list of inlet entries. The number of entries is given by the value of inletCount. | 1.3.6.1.4.1.13742.4.1.20.2 | not-accessible | current | |
| inletEntry OBJECT-TYPE An inlet entry containing objects for each inlet | 1.3.6.1.4.1.13742.4.1.20.2.1 | not-accessible | current | |
| inletIndex OBJECT-TYPE A unique value for each inlet. Its value ranges between 1 and the value of inletCount. | 1.3.6.1.4.1.13742.4.1.20.2.1.1 | Integer32 (1..256) | not-accessible | current |
| inletPoleCount OBJECT-TYPE The number of poles for an inlet (1 for single phase, 3 for 3 phase Delta-wired, 4 for 3 phase WYE wired). | 1.3.6.1.4.1.13742.4.1.20.2.1.3 | Integer32 | read-only | current |
| inletCurrentRating OBJECT-TYPE The input current Rating | 1.3.6.1.4.1.13742.4.1.20.2.1.4 | MilliAmps | read-only | current |
| inletCurrent OBJECT-TYPE A unique value for the current sensor attached to the inlet. This value is reported in milliamps (1/1000th of an amp). This OID does not apply to 3 phase systems; a value of 0 will be reported for same. | 1.3.6.1.4.1.13742.4.1.20.2.1.7 | MilliAmps | read-only | current |
| inletVoltage OBJECT-TYPE A unique value for the voltage sensor attached to the intlet.This value is reported in millivolts (1/1000th of a volt). This OID does not apply to 3 phase systems; a value of 0 will be reported for same. | 1.3.6.1.4.1.13742.4.1.20.2.1.8 | MilliVolts | read-only | current |
| inletActivePower OBJECT-TYPE The active power for the inlet This value is reported in Watts. | 1.3.6.1.4.1.13742.4.1.20.2.1.9 | Watts | read-only | current |
| inletApparentPower OBJECT-TYPE The apparent power for the inlet. This value is reported in Volt-Amps | 1.3.6.1.4.1.13742.4.1.20.2.1.10 | VoltAmps | read-only | current |
| inletPowerFactor OBJECT-TYPE A unique value for the power factor of the inlet. The reading represents a percentage in the range of 0% to 100%. | 1.3.6.1.4.1.13742.4.1.20.2.1.11 | PowerFactorPercentage | read-only | current |
| inletActiveEnergy OBJECT-TYPE This object has an invalid value if outletEnergySupport = 'No'; In all other cases, it is the value of the cumulative active energy for this inlet. This value is reported in WattHours | 1.3.6.1.4.1.13742.4.1.20.2.1.12 | WattHours | read-only | current |
| inletCurrentUnbalance OBJECT-TYPE A string displaying the current unbalance in percent. It will have the value NA if the feature is disabled, the PX is not a 3-phase unit,or the average of the line currents is zero | 1.3.6.1.4.1.13742.4.1.20.2.1.15 | DisplayString | read-only | current |
| inletCurrentUpperWarning OBJECT-TYPE The value of the upper warning (non-critical) current threshold for the inlet. This value is reported in milliamps (1/1000th of an amp) | 1.3.6.1.4.1.13742.4.1.20.2.1.20 | MilliAmps | read-write | current |
| inletCurrentUpperCritical OBJECT-TYPE The value of the upper critical current threshold for the inlet. This value is reported in milliamps (1/1000th of an amp) | 1.3.6.1.4.1.13742.4.1.20.2.1.21 | MilliAmps | read-write | current |
| inletCurrentLowerWarning OBJECT-TYPE The value of the lower warning (non-critical) current threshold for the inlet. This value is reported in milliamps (1/1000th of an amp). This OID is valid for inline meter PDU's. only | 1.3.6.1.4.1.13742.4.1.20.2.1.22 | MilliAmps | read-write | current |
| inletCurrentLowerCritical OBJECT-TYPE The value of the lower critical current threshold for the inlet. This value is reported in milliamps (1/1000th of an amp). This OID is valid for inline meter PDU's only. | 1.3.6.1.4.1.13742.4.1.20.2.1.23 | MilliAmps | read-write | current |
| inletVoltageUpperWarning OBJECT-TYPE The value of the upper warning (non-critical) current threshold for the inlet. This value is reported in millivolts (1/1000th of a volt) | 1.3.6.1.4.1.13742.4.1.20.2.1.24 | MilliVolts | read-write | current |
| inletVoltageUpperCritical OBJECT-TYPE The value of the upper critical current threshold for the inlet. This value is reported in millivolts (1/1000th of a volt) | 1.3.6.1.4.1.13742.4.1.20.2.1.25 | MilliVolts | read-write | current |
| inletVoltageLowerWarning OBJECT-TYPE The value of the lower warning (non-critical) current threshold for the inlet. This value is reported in millivolts (1/1000th of a volt) | 1.3.6.1.4.1.13742.4.1.20.2.1.26 | MilliVolts | read-write | current |
| inletVoltageLowerCritical OBJECT-TYPE The value of the lower critical current threshold for the inlet. This value is reported in millivolts (1/1000th of a volt) | 1.3.6.1.4.1.13742.4.1.20.2.1.27 | MilliVolts | read-write | current |
| inletCurrentUnbalanceUpperCritical OBJECT-TYPE The value of the upper critical current Unbalance threshold. | 1.3.6.1.4.1.13742.4.1.20.2.1.28 | Percentage | read-write | current |
| inletCurrentUnbalanceUpperWarning OBJECT-TYPE The value of the upper warning current Unbalance threshold. | 1.3.6.1.4.1.13742.4.1.20.2.1.29 | Percentage | read-write | current |
| inletCurrentHysteresis OBJECT-TYPE The hysteresis used for deassertions. This value is reported in milliamps (1/1000th of an amp) | 1.3.6.1.4.1.13742.4.1.20.2.1.30 | Unsigned32 | read-write | current |
| inletVoltageHysteresis OBJECT-TYPE The hysteresis used for deassertions. This value is reported in millivolts (1/1000th of a volt) | 1.3.6.1.4.1.13742.4.1.20.2.1.31 | Unsigned32 | read-write | current |
| inletCurrentUnbalanceHysteresis OBJECT-TYPE The hysteresis used for deassertions. This value is reported in percent | 1.3.6.1.4.1.13742.4.1.20.2.1.32 | Unsigned32 | read-write | current |
| inletPole OBJECT-IDENTITY | 1.3.6.1.4.1.13742.4.1.21 | |||
| inletPoleTable OBJECT-TYPE A list of line input entries. The number of entries is given by the value of inletTable(inletIndex).inletPoleCount. | 1.3.6.1.4.1.13742.4.1.21.2 | not-accessible | current | |
| inletPoleEntry OBJECT-TYPE An entry in the data log containing input line values for a particular input line. | 1.3.6.1.4.1.13742.4.1.21.2.1 | not-accessible | current | |
| inletPoleIndex OBJECT-TYPE A unique value for each line input. Its value ranges between 1 and of inletTable(inletIndex).inletPoleCount. | 1.3.6.1.4.1.13742.4.1.21.2.1.1 | Integer32 (1..256) | not-accessible | current |
| inletPoleLabel OBJECT-TYPE A string identifying the Line For Single Phase: L1 For 3phase Delta wired outlets: L1, L2, L3 For 3phase WYE Wired Outlets: L1, L2, L3 | 1.3.6.1.4.1.13742.4.1.21.2.1.2 | DisplayString | read-only | current |
| inletPoleCurrent OBJECT-TYPE The value of the line current reported in MilliAmps. inletPoleIndex = 1; For Single Phase, Input Line Current; For 3-phase, L1 Current inletPoleIndex = 2; For 3-phase, L2 Current inletPoleIndex = 3; For 3-phase, L3 Current | 1.3.6.1.4.1.13742.4.1.21.2.1.3 | MilliAmps | read-only | current |
| inletPoleVoltage OBJECT-TYPE The value of the line-line voltage reported in MilliVolts. inletPoleIndex = 1; Single Phase Input Line Voltage 3-phase, L1-L2 Voltage or L1-N voltage inletPoleIndex = 2; 3-phase L2-L3 Voltage or L2-N voltage inletPoleaIndex = 3; 3-phase L3-L1 Voltage or L3-N voltage | 1.3.6.1.4.1.13742.4.1.21.2.1.4 | MilliVolts | read-only | current |
| inletPoleMaxCurrent OBJECT-TYPE This object has an invalid value for a single-phase PDU. If inletPoleCount = 1, then the value is invalid; In all other cases, it is the value of the max. current sensor attached to the inlet Pole. This value is reported in milliamps (1/1000th of an amp) | 1.3.6.1.4.1.13742.4.1.21.2.1.5 | MilliAmps | read-only | current |
| inletPoleActivePower OBJECT-TYPE This object has a valid value only for inline meters. If inlineMeter = 'No', then the value is invalid; In all other cases, it is the active power for the line/pole. The value is reported in Watts. | 1.3.6.1.4.1.13742.4.1.21.2.1.7 | Watts | read-only | current |
| inletPoleApparentPower OBJECT-TYPE This object has a valid value only for inline meters. If inlineMeter = 'No', then the value is invalid; In all other cases, it is the apparent power for the line/pole. The value is reported in Volt-Amps | 1.3.6.1.4.1.13742.4.1.21.2.1.8 | VoltAmps | read-only | current |
| inletPolePowerFactor OBJECT-TYPE This object has a valid value only for inline meters. If inlineMeter = 'No', then the value is invalid; In all other cases, it is the power factor for the line/pole The reading represents a percentage in the range of 0% to 100%. | 1.3.6.1.4.1.13742.4.1.21.2.1.9 | PowerFactorPercentage | read-only | current |
| inletPoleActiveEnergy OBJECT-TYPE This object has a valid value only for inline meters. If inlineMeter = 'No', then the value is invalid; In all other cases, it is the cumulative active energy for the line/pole. The value is reported in WattHours | 1.3.6.1.4.1.13742.4.1.21.2.1.11 | WattHours | read-only | current |
| environmental OBJECT-IDENTITY | 1.3.6.1.4.1.13742.4.2 | |||
| tempSensorCount OBJECT-TYPE The number of external temperature sensors (regardless of their current state) present on this pdu. This is deprecated in favor of externalSensors | 1.3.6.1.4.1.13742.4.2.1 | Integer32 | read-only | deprecated |
| tempSensorTable OBJECT-TYPE A list of temperature sensor entries. The number of entries is given by the value of tempSensorCount. This is deprecated in favor of externalSensors | 1.3.6.1.4.1.13742.4.2.2 | not-accessible | deprecated | |
| tempSensorEntry OBJECT-TYPE An entry containing sensor reading and threshold settings for a particular temperature sensor. This is deprecated in favor of externalSensors | 1.3.6.1.4.1.13742.4.2.2.1 | not-accessible | deprecated | |
| tempSensorIndex OBJECT-TYPE A unique value for each temperature sensor. Its value ranges between 1 and tempSensorCount. This is deprecated in favor of externalSensors | 1.3.6.1.4.1.13742.4.2.2.1.1 | Integer32 (1..256) | not-accessible | deprecated |
| tempSensorLabel OBJECT-TYPE A settable human-readable label for the external temperature sensor. One possible use for this label is to convey sensor location. This is deprecated in favor of externalSensors | 1.3.6.1.4.1.13742.4.2.2.1.2 | DisplayString | read-write | deprecated |
| temperature OBJECT-TYPE The value of the external temperature sensor reported in tenth degrees celsius. This is deprecated in favor of externalSensors | 1.3.6.1.4.1.13742.4.2.2.1.3 | TenthDegreesCelsius | read-only | deprecated |
| tempLowerWarning OBJECT-TYPE The value of the lower warning (non-critical) threshold. This is deprecated in favor of externalSensors | 1.3.6.1.4.1.13742.4.2.2.1.4 | DegreesCelsius | read-write | deprecated |
| tempUpperWarning OBJECT-TYPE The value of the upper warning (non-critical) threshold. This is deprecated in favor of externalSensors | 1.3.6.1.4.1.13742.4.2.2.1.5 | DegreesCelsius | read-write | deprecated |
| tempLowerCritical OBJECT-TYPE The value of the lower critical threshold. This is deprecated in favor of externalSensors | 1.3.6.1.4.1.13742.4.2.2.1.6 | DegreesCelsius | read-write | deprecated |
| tempUpperCritical OBJECT-TYPE The value of the upper critical threshold. This is deprecated in favor of externalSensors | 1.3.6.1.4.1.13742.4.2.2.1.7 | DegreesCelsius | read-write | deprecated |
| tempXCoordinate OBJECT-TYPE The value of X coordinate in freeform with number of characters <= 24 This is deprecated in favor of externalSensors | 1.3.6.1.4.1.13742.4.2.2.1.8 | DisplayString | read-write | deprecated |
| tempYCoordinate OBJECT-TYPE The value of Y coordinate in freeform with number of characters <= 24 This is deprecated in favor of externalSensors | 1.3.6.1.4.1.13742.4.2.2.1.9 | DisplayString | read-write | deprecated |
| tempZCoordinate OBJECT-TYPE The value of Z coordinate in one of two formats: either freeform with number of characters <= 24 or in Z units so that 0 =< integer value <= 60 This is deprecated in favor of externalSensors | 1.3.6.1.4.1.13742.4.2.2.1.10 | DisplayString | read-write | deprecated |
| humiditySensorCount OBJECT-TYPE The number of external humidity sensors (regardless of their current state) present on this pdu. This is deprecated in favor of externalSensors | 1.3.6.1.4.1.13742.4.2.3 | Integer32 | read-only | deprecated |
| humiditySensorTable OBJECT-TYPE A list of humidity sensor entries. The number of entries is given by the value of humiditySensorCount. This is deprecated in favor of externalSensors | 1.3.6.1.4.1.13742.4.2.4 | not-accessible | deprecated | |
| humiditySensorEntry OBJECT-TYPE An entry containing sensor reading and threshold settings for a particular humidity sensor. This is deprecated in favor of externalSensors | 1.3.6.1.4.1.13742.4.2.4.1 | not-accessible | deprecated | |
| humiditySensorIndex OBJECT-TYPE A unique value for each humidity sensor. Its value ranges between 1 and humiditySensorCount. This is deprecated in favor of externalSensors | 1.3.6.1.4.1.13742.4.2.4.1.1 | Integer32 (1..256) | not-accessible | deprecated |
| humiditySensorLabel OBJECT-TYPE A settable human-readable label for the external humidity sensor. One possible use for this label is to convey sensor location. This is deprecated in favor of externalSensors | 1.3.6.1.4.1.13742.4.2.4.1.2 | DisplayString | read-write | deprecated |
| humidity OBJECT-TYPE The value of the external humidity sensor reported as relative humidity (a percentage). This is deprecated in favor of externalSensors | 1.3.6.1.4.1.13742.4.2.4.1.3 | RelativeHumidity | read-only | deprecated |
| humidityLowerWarning OBJECT-TYPE The value of the lower warning (non-critical) threshold. This is deprecated in favor of externalSensors | 1.3.6.1.4.1.13742.4.2.4.1.4 | RelativeHumidity | read-write | deprecated |
| humidityUpperWarning OBJECT-TYPE The value of the upper warning (non-critical) threshold. This is deprecated in favor of externalSensors | 1.3.6.1.4.1.13742.4.2.4.1.5 | RelativeHumidity | read-write | deprecated |
| humidityLowerCritical OBJECT-TYPE The value of the lower critical threshold. This is deprecated in favor of externalSensors | 1.3.6.1.4.1.13742.4.2.4.1.6 | RelativeHumidity | read-write | deprecated |
| humidityUpperCritical OBJECT-TYPE The value of the upper critical threshold. This is deprecated in favor of externalSensors | 1.3.6.1.4.1.13742.4.2.4.1.7 | RelativeHumidity | read-write | deprecated |
| humidityXCoordinate OBJECT-TYPE The value of X coordinate in freeform with number of characters <= 24 This is deprecated in favor of externalSensors | 1.3.6.1.4.1.13742.4.2.4.1.8 | DisplayString | read-write | deprecated |
| humidityYCoordinate OBJECT-TYPE The value of Y coordinate in freeform with number of characters <= 24 This is deprecated in favor of externalSensors | 1.3.6.1.4.1.13742.4.2.4.1.9 | DisplayString | read-write | deprecated |
| humidityZCoordinate OBJECT-TYPE The value of Z coordinate in one of two formats: either freeform with number of characters <= 24 or in Z units so that 0 =< integer value <= 60 This is deprecated in favor of externalSensors | 1.3.6.1.4.1.13742.4.2.4.1.10 | DisplayString | read-write | deprecated |
| externalSensors OBJECT-IDENTITY | 1.3.6.1.4.1.13742.4.3 | |||
| externalSensorCount OBJECT-TYPE The number of external sensors | 1.3.6.1.4.1.13742.4.3.1 | Integer32 (0..255) | read-only | current |
| reorderexternalSensorTableEntries OBJECT-TYPE This is an operation. It has write-only semantics. GET operation will return the empty string. For SET operations, it specifies the new order of the externalSensorTable entries. a) The list must contain entries for each managed sensor, even if the sensor is not being moved. b) The list must not have more than 16 entries. c) 1 <= Valid sensorID <= 16 d) The length of the list is the value of the largest sensorID in the original (before the move) list of managed sensors. e) Each sensorID must appear only once in the list. f) If there are missing numbers in the original list of sensorIDs, then each missing number must be indicated by a comma. EXAMPLE 1: Managed sensors have IDs 1,2,3,4,5 Move 1 to 13; 2 to 8; 3 to 9; 4 is not moved; 5 moves to 2 Existing Position New Position 1 --> 13 2 --> 8 3 --> 9 4 --> 4 5 --> 2 Since the largest sensorID before the move is 5, the length of the list is 5 Comma separated list is 13,8,9,4,2 EXAMPLE 2: Managed sensors have IDs 2,5,6,7,11 Sensor IDs 1,3,4,8,9,10 do not appear in the list. These positions must be indicated by commas. Move 2 to 13; 5 to 8; 6 to 9; 7 to 16; 11 does not move Existing Position New Position 2 --> 13 5 --> 8 6 --> 9 7 --> 16 11 --> 11 Since the largest sensorID before the move is 11, the length of the list is 11 Comma separated list is ,13,,,8,9,16,,,,11 | 1.3.6.1.4.1.13742.4.3.2 | DisplayString | read-write | current |
| externalSensorTable OBJECT-TYPE A list of externalSensor entries. The number of entries is given by the value of externalSensorCount for the pdu. | 1.3.6.1.4.1.13742.4.3.3 | not-accessible | current | |
| externalSensorEntry OBJECT-TYPE An externalSensor entry containing objects at the for a particular PDU. | 1.3.6.1.4.1.13742.4.3.3.1 | not-accessible | current | |
| sensorID OBJECT-TYPE A unique value for each sesnor. Its value ranges between 1 and the value of externalSensorCount. | 1.3.6.1.4.1.13742.4.3.3.1.1 | Integer32 (1..256) | not-accessible | current |
| externalSensorType OBJECT-TYPE The type of sensor | 1.3.6.1.4.1.13742.4.3.3.1.2 | TypeOfSensorEnumeration | read-only | current |
| externalSensorSerialNumber OBJECT-TYPE The sensor serial number | 1.3.6.1.4.1.13742.4.3.3.1.3 | DisplayString | read-only | current |
| externalSensorName OBJECT-TYPE The user given name | 1.3.6.1.4.1.13742.4.3.3.1.4 | DisplayString | read-write | current |
| externalSensorChannelNumber OBJECT-TYPE The channel number, applies only to contact sensors; -1 for other sensors | 1.3.6.1.4.1.13742.4.3.3.1.5 | Integer32 | read-only | current |
| externalSensorXCoordinate OBJECT-TYPE The X coordinate | 1.3.6.1.4.1.13742.4.3.3.1.6 | DisplayString | read-write | current |
| externalSensorYCoordinate OBJECT-TYPE The Y coordinate | 1.3.6.1.4.1.13742.4.3.3.1.7 | DisplayString | read-write | current |
| externalSensorZCoordinate OBJECT-TYPE The Z coordinate | 1.3.6.1.4.1.13742.4.3.3.1.8 | DisplayString | read-write | current |
| externalBinarySensorSubtype OBJECT-TYPE The subtype of the binary sensor This OID is valid for discrete sensors only. | 1.3.6.1.4.1.13742.4.3.3.1.9 | TypeOfSensorEnumeration | read-only | current |
| externalSensorUnits OBJECT-TYPE The base units. Does not apply (gets will return 0) to onOff, trip, vibration, waterDetection, smokeDetection sensors | 1.3.6.1.4.1.13742.4.3.3.1.16 | SensorUnitsEnumeration | read-only | current |
| externalSensorDecimalDigits OBJECT-TYPE The number of digits displayed to the right of the decimal point. Does not apply (gets will return 0) to onOff, trip, vibration, waterDetection, smokeDetection sensors | 1.3.6.1.4.1.13742.4.3.3.1.17 | Unsigned32 | read-only | current |
| externalSensorLowerCriticalThreshold OBJECT-TYPE The lower critical threshold The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and externalSensorDecimalDigits is 2, then actual value is .01 Does not apply (gets will return 0) to onOff, trip, vibration, waterDetection, smokeDetection sensors | 1.3.6.1.4.1.13742.4.3.3.1.31 | Integer32 | read-write | current |
| externalSensorLowerWarningThreshold OBJECT-TYPE The lower non-critical (warning) threshold The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and externalSensorDecimalDigits is 2, then actual value is .01 Does not apply (gets will return 0) to onOff, trip, vibration, waterDetection, smokeDetection sensors | 1.3.6.1.4.1.13742.4.3.3.1.32 | Integer32 | read-write | current |
| externalSensorUpperCriticalThreshold OBJECT-TYPE The upper critical threshold The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and externalSensorDecimalDigits is 2, then actual value is .01 Does not apply (gets will return 0) to onOff, trip, vibration, waterDetection, smokeDetection sensors | 1.3.6.1.4.1.13742.4.3.3.1.33 | Integer32 | read-write | current |
| externalSensorUpperWarningThreshold OBJECT-TYPE The upper non-critical (warning) threshold The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and externalSensorDecimalDigits is 2, then actual value is .01 Does not apply (gets will return 0) to onOff, trip, vibration, waterDetection, smokeDetection sensors | 1.3.6.1.4.1.13742.4.3.3.1.34 | Integer32 | read-write | current |
| externalSensorHysteresis OBJECT-TYPE The hysteresis used for deassertions The value of this OID variable should be scaled by externalSensorDecimalDigits. For example, if the value is 1 and externalSensorDecimalDigits is 2, then actual value is 0.01. This parameter does not apply to onOff, trip, vibration, waterDetection, smokeDetection sensors. | 1.3.6.1.4.1.13742.4.3.3.1.35 | Unsigned32 | read-write | current |
| externalSensorState OBJECT-TYPE The sensor state | 1.3.6.1.4.1.13742.4.3.3.1.40 | StateOfSensorEnumeration | read-only | current |
| externalSensorValue OBJECT-TYPE The sensor reading Does not apply (gets will return 0) to onOff, trip, vibration, waterDetection, smokeDetection sensors | 1.3.6.1.4.1.13742.4.3.3.1.41 | Integer32 | read-only | current |
| conformance OBJECT-IDENTITY | 1.3.6.1.4.1.13742.4.9 | |||
| compliances OBJECT-IDENTITY | 1.3.6.1.4.1.13742.4.9.1 | |||
| groups OBJECT-IDENTITY | 1.3.6.1.4.1.13742.4.9.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| rebootStarted NOTIFICATION-TYPE The reboot process has started | 1.3.6.1.4.1.13742.4.0.1 | current |
| rebootCompleted NOTIFICATION-TYPE The reboot process is complete | 1.3.6.1.4.1.13742.4.0.2 | current |
| userLogin NOTIFICATION-TYPE A user logged in | 1.3.6.1.4.1.13742.4.0.3 | current |
| userLogout NOTIFICATION-TYPE A user logged out | 1.3.6.1.4.1.13742.4.0.4 | current |
| userAuthenticationFailure NOTIFICATION-TYPE A user authentication attempt failed | 1.3.6.1.4.1.13742.4.0.5 | current |
| userSessionTimeout NOTIFICATION-TYPE A user timed out from the device | 1.3.6.1.4.1.13742.4.0.8 | current |
| userAdded NOTIFICATION-TYPE A user was added to the system | 1.3.6.1.4.1.13742.4.0.11 | current |
| userModified NOTIFICATION-TYPE A user account was modified | 1.3.6.1.4.1.13742.4.0.12 | current |
| userDeleted NOTIFICATION-TYPE A user was deleted from the system | 1.3.6.1.4.1.13742.4.0.13 | current |
| groupAdded NOTIFICATION-TYPE A group was added to the system | 1.3.6.1.4.1.13742.4.0.14 | current |
| groupModified NOTIFICATION-TYPE A group was modified | 1.3.6.1.4.1.13742.4.0.15 | current |
| groupDeleted NOTIFICATION-TYPE A group was deleted from the system | 1.3.6.1.4.1.13742.4.0.16 | current |
| deviceUpdateStarted NOTIFICATION-TYPE The device update has started | 1.3.6.1.4.1.13742.4.0.20 | current |
| userBlocked NOTIFICATION-TYPE A blocked user tried to log in | 1.3.6.1.4.1.13742.4.0.22 | current |
| powerControl NOTIFICATION-TYPE An outlet has been switched | 1.3.6.1.4.1.13742.4.0.23 | current |
| userPasswordChanged NOTIFICATION-TYPE A user password was changed | 1.3.6.1.4.1.13742.4.0.24 | current |
| passwordSettingsChanged NOTIFICATION-TYPE Strong password settings changed | 1.3.6.1.4.1.13742.4.0.28 | current |
| firmwareFileDiscarded NOTIFICATION-TYPE A firmware file discarded | 1.3.6.1.4.1.13742.4.0.36 | current |
| firmwareValidationFailed NOTIFICATION-TYPE A firmware validation failed | 1.3.6.1.4.1.13742.4.0.38 | current |
| securityViolation NOTIFICATION-TYPE Security violation. | 1.3.6.1.4.1.13742.4.0.39 | current |
| logFileCleared NOTIFICATION-TYPE The log file has been cleared. | 1.3.6.1.4.1.13742.4.0.41 | current |
| thresholdAlarm NOTIFICATION-TYPE Configured sensor theshold event. The 'thresholdEventType' variable will indicate whether or not the threshold triggered or cleared. thresholdValue and sensorValue have valid values only for external temperature and humidity sensors. | 1.3.6.1.4.1.13742.4.0.45 | current |
| outletGroupingConnectivityLost NOTIFICATION-TYPE Master PDU lost contact with the slave PDU in an outlet grouping configuration. | 1.3.6.1.4.1.13742.4.0.50 | current |
| circuitBreakerTripped NOTIFICATION-TYPE Circuit Breaker Tripped. | 1.3.6.1.4.1.13742.4.0.51 | current |
| circuitBreakerRecovered NOTIFICATION-TYPE Circuit Breaker Recovered. | 1.3.6.1.4.1.13742.4.0.52 | current |
| bulkConfigurationSaved NOTIFICATION-TYPE Bulk Configuration saved. | 1.3.6.1.4.1.13742.4.0.53 | current |
| bulkConfigurationCopied NOTIFICATION-TYPE Bulk Configuration saved. | 1.3.6.1.4.1.13742.4.0.54 | current |
| environmentalSensorsConnectivityLost NOTIFICATION-TYPE lost connectivity to environmental Sensors | 1.3.6.1.4.1.13742.4.0.55 | current |
| externalOnOffSensorStateChange NOTIFICATION-TYPE External OnOff Sensor State Change. | 1.3.6.1.4.1.13742.4.0.56 | current |
| environmentalSensorsConnectivityRestored NOTIFICATION-TYPE connectivity to environmental Sensor was restored | 1.3.6.1.4.1.13742.4.0.57 | current |
| voltageMeasurementError NOTIFICATION-TYPE voltage measurement error, a Psoc (Outlet Controller) reported zero voltage and non-zero current. Voltage, power and energy measurements may be in error | 1.3.6.1.4.1.13742.4.0.58 | current |
| fipsModeEnabled NOTIFICATION-TYPE FIPS Mode Enabled | 1.3.6.1.4.1.13742.4.0.59 | current |
| fipsModeDisabled NOTIFICATION-TYPE FIPS Mode Disabled | 1.3.6.1.4.1.13742.4.0.60 | current |
| managingenvironmentalSensor NOTIFICATION-TYPE begin managing environmental Sensor | 1.3.6.1.4.1.13742.4.0.61 | current |
| unmanagingenvironmentalSensor NOTIFICATION-TYPE cease managing environmental Sensor | 1.3.6.1.4.1.13742.4.0.62 | current |
| ipmiOverLANEnabled NOTIFICATION-TYPE IPMI Over LAN Mode has been Enabled | 1.3.6.1.4.1.13742.4.0.63 | current |
| ipmiOverLANDisabled NOTIFICATION-TYPE IPMI Over LAN Mode has been Disabled | 1.3.6.1.4.1.13742.4.0.64 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| compliance MODULE-COMPLIANCE The requirements for conformance to the PDU-MIB. This is deprecated and the new compliance ComplianceRev1 has been added | 1.3.6.1.4.1.13742.4.9.1.1 | deprecated |
| complianceRev1 MODULE-COMPLIANCE The requirements for conformance to the PDU-MIB. This is deprecated and the new compliance ComplianceRev2 has been added | 1.3.6.1.4.1.13742.4.9.1.2 | deprecated |
| complianceRev2 MODULE-COMPLIANCE The requirements for conformance to the PDU-MIB. This is deprecated and the new compliance ComplianceRev3 has been added | 1.3.6.1.4.1.13742.4.9.1.3 | deprecated |
| complianceRev3 MODULE-COMPLIANCE The requirements for conformance to the PDU-MIB.This is deprecated and the new compliance ComplianceRev4 has been added | 1.3.6.1.4.1.13742.4.9.1.4 | deprecated |
| complianceRev4 MODULE-COMPLIANCE The requirements for conformance to the PDU-MIB. This is deprecated and the new compliance ComplianceRev5 has been added | 1.3.6.1.4.1.13742.4.9.1.5 | deprecated |
| complianceRev5 MODULE-COMPLIANCE The requirements for conformance to the PDU-MIB. | 1.3.6.1.4.1.13742.4.9.1.6 | current |
| infoGroup OBJECT-GROUP A collection of objects providing basic information about the pdu. | 1.3.6.1.4.1.13742.4.9.2.1 | deprecated |
| outletsGroup OBJECT-GROUP A collection of objects providing basic information about the outlets, including sensor readings. | 1.3.6.1.4.1.13742.4.9.2.2 | current |
| unitSensorsGroup OBJECT-GROUP A collection of objects providing unit level sensor readings.This group is deprecated in favor of unitSensorsGroupRev | 1.3.6.1.4.1.13742.4.9.2.4 | deprecated |
| externalTemperatureGroup OBJECT-GROUP A collection of objects providing external temperature sensor readings and threshold settings. This group is deprecated in favor of the externalSensorsGroup | 1.3.6.1.4.1.13742.4.9.2.6 | deprecated |
| externalHumidityGroup OBJECT-GROUP A collection of objects providing external humidity sensor readings and threshold settings. This group is deprecated in favor of the externalSensorsGroup | 1.3.6.1.4.1.13742.4.9.2.7 | deprecated |
| trapsGroup NOTIFICATION-GROUP A collection of traps. | 1.3.6.1.4.1.13742.4.9.2.9 | current |
| lineCurrentGroup OBJECT-GROUP A collection of objects describing the line inputs. This group is deprecated in favor of inletPoleGroup | 1.3.6.1.4.1.13742.4.9.2.10 | deprecated |
| circuitBreakerGroup OBJECT-GROUP A collection of objects describing the circuit breakers. | 1.3.6.1.4.1.13742.4.9.2.11 | current |
| lineVoltageGroup OBJECT-GROUP A collection of objects describing the line voltages. This group is deprecated in favor of inletPoleGroup | 1.3.6.1.4.1.13742.4.9.2.12 | deprecated |
| unitSensorsGroupRev OBJECT-GROUP A collection of objects providing unit level sensor readings.This group is deprecated in favor of unitSensorsGroupRev2 | 1.3.6.1.4.1.13742.4.9.2.13 | deprecated |
| dataLogGroup OBJECT-GROUP A collection of objects describing the pdu data. This group is being deprecated in favor of dataLogGroupRev | 1.3.6.1.4.1.13742.4.9.2.14 | deprecated |
| inletPoleGroup OBJECT-GROUP A collection of objects describing the inlet poles. | 1.3.6.1.4.1.13742.4.9.2.15 | current |
| inletsGroup OBJECT-GROUP A collection of objects providing basic information about the inlets, including sensor readings. | 1.3.6.1.4.1.13742.4.9.2.16 | current |
| dataLogGroupRev OBJECT-GROUP A collection of objects describing the pdu data. This group is being deprecated in favor of dataLogGroupRev2 | 1.3.6.1.4.1.13742.4.9.2.17 | deprecated |
| unitSensorsGroupRev2 OBJECT-GROUP A collection of objects providing unit level sensor readings. | 1.3.6.1.4.1.13742.4.9.2.18 | current |
| externalSensorsGroup OBJECT-GROUP A collection of objects providing external sensor readings and configuration settings. | 1.3.6.1.4.1.13742.4.9.2.20 | current |
| dataLogGroupRev2 OBJECT-GROUP A collection of objects describing the pdu data. | 1.3.6.1.4.1.13742.4.9.2.21 | current |
| infoGroupRev2 OBJECT-GROUP A collection of objects providing basic information about the pdu. | 1.3.6.1.4.1.13742.4.9.2.22 | current |