PDN-LINK-FAULT-MGMT-MIB
- Registered at
- 1.3.6.1.4.1.1795.2.24.2.40.1
- Last updated
- 2003-04-03 19:00
- Organization
- Paradyne Corporation MIB Working Group
- Revisions
- 2003-04-23 18:00
- Namespace
- zhone
- Source file
PDN-LINK-FAULT-MGMT-MIB- Digest
sha256:ad0dcce025415cbf6eec61ccb37b3a649933be7f17c3ff4f5de36167e03c7710
Description
This management information module supports the objects to be used for fault management configuration on primary and secondary links.
Contact
Paradyne Networks Inc. Postal: 8545, 126th Ave. N. Largo, FL 33779 US Editor: Jesus Pinto Email: mibwg_team@eng.paradyne.com
Imports
| From | Symbols |
|---|---|
| IF-MIB | ifIndex |
| PDN-HEADER-MIB | pdnLinkFaultMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB IF-MIB PDN-HEADER-MIB PDN-LINK-FAULT-MGMT-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| pdnLinkFaultMgmtMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.40.1.1 | |||
| pdnLinkFaultMgmtApsSelection OBJECT-TYPE This object is used to enable or disable the Automatic Protection Switching (Aps) feature on this device. This object can not be enabled if the -Switchover due to link failures- is enabled. | 1.3.6.1.4.1.1795.2.24.2.40.1.1.1 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| pdnLinkFaultMgmtSwitchoverSelection OBJECT-TYPE This object is used to enable or disable the Switchover Due to link failures feature on on this device. This object can not be enabled if the APS feature is enabled. | 1.3.6.1.4.1.1795.2.24.2.40.1.1.2 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| pdnLinkFailureConfigTable OBJECT-TYPE This table contains one row per link being monitored for link failures. | 1.3.6.1.4.1.1795.2.24.2.40.1.1.3 | not-accessible | current | |
| pdnLinkFailureConfigEntry OBJECT-TYPE Configuration information about a particular interface being monitored for link failured. | 1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1 | not-accessible | current | |
| pdnLinkFailureLOSPeriodBeforeSwitching OBJECT-TYPE This object allows users to configure the amount of time a LOS condition shall exist on this uplink before initiating a switchover. Switchover due to LOS condition on this uplink will not be valid if any of the APS (Automatic Protection Switching) is enabled. | 1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1.1 | Integer32 (0..300) | read-write | current |
| pdnLinkFailureLOFPeriodBeforeSwitching OBJECT-TYPE This object allows users to configure the amount of time a LOF condition shall exist on this uplink before initiating a switchover. Switchover due to LOF condition on this uplink will not be valid if any of the APS (Automatic Protection Switching) is enabled. | 1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1.2 | Integer32 (0..300) | read-write | current |
| pdnLinkFailureAISLPeriodBeforeSwitching OBJECT-TYPE This object allows users to configure the amount of time a AIS-L condition shall exist on this uplink before initiating a switchover. Switchover due to AIS-L condition on this uplink will not be valid if any of the APS (Automatic Protection Switching) is enabled. | 1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1.3 | Integer32 (0..300) | read-write | current |
| pdnLinkFailureSdPeriodBeforeSwitching OBJECT-TYPE This object allows users to configure the amount of time a Signal Degraded (Sd) condition shall exist on this uplink before initiating a switchover. Switchover due to Sd condition on this uplink will not be valid if any of the APS (Automatic Protection Switching) is enabled. | 1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1.4 | Integer32 (0..300) | read-write | current |
| pdnLinkFailureSfPeriodBeforeSwitching OBJECT-TYPE This object allows users to configure the amount of time a Signal Failure Bit (Sf) condition shall exist on this uplink before initiating a switchover. Switchover due to Sf condition on this uplink will not be valid if any of the APS (Automatic Protection Switching) is enabled. | 1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1.5 | Integer32 (0..300) | read-write | current |
| pdnLinkFailureSdBerThreshold OBJECT-TYPE This object allows users to configure the threshold for the Signal Degrade Bit Error Rate (Sd). The negated value of this number is used as the exponent of 10 for computing the threshold value for the Bit Error Rate (BER). For example, a value of 5 indicates a BER threshold of 10^-5. | 1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1.6 | Integer32 (5..9) | read-write | current |
| pdnLinkFailureSfBerThreshold OBJECT-TYPE This object allows users to configure the threshold for the Signal Failure Bit Error Rate (Sf). The negated value of this number is used as the exponent of 10 for computing the threshold value for the Bit Error Rate (BER). For example, a value of 5 indicates a BER threshold of 10^-5. | 1.3.6.1.4.1.1795.2.24.2.40.1.1.3.1.7 | Integer32 (3..5) | read-write | current |
| pdnDualLinkSelection OBJECT-TYPE This object is used to enable or disable the ability to split traffic among dual links. | 1.3.6.1.4.1.1795.2.24.2.40.1.1.4 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| pdnLinkFaultMgmtMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.40.1.2 | |||
| pdnLinkFaultMgmtCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.40.1.2.1 | |||
| pdnLinkFaultMgmtGroups OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.40.1.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| pdnLinkFaultMgmtCompliance MODULE-COMPLIANCE The compliance statement for SNMP entities capable of configuring link fault conditions. | 1.3.6.1.4.1.1795.2.24.2.40.1.2.1.1 | current |
| pdnLinkFaultMgmtGeneralGroup OBJECT-GROUP A collection of configuration objects applicable to link fault mgmt implementation. | 1.3.6.1.4.1.1795.2.24.2.40.1.2.2.1 | current |
| pdnLinkSwitchoverGroup OBJECT-GROUP A collection of configuration objects applicable to all redundancy implementations. | 1.3.6.1.4.1.1795.2.24.2.40.1.2.2.2 | current |