PDN-HDSL2-SHDSL-LINE-MIB
- Registered at
- 1.3.6.1.4.1.1795.2.24.2.6.23
- Last updated
- 2005-01-28 00:00
- Organization
- Paradyne Networks MIB Working Group Other information about group editing the MIB
- Revisions
- 2005-01-28 00:00, 2004-04-27 00:00, 2004-04-21 00:00, 2004-01-16 15:00, 2003-11-06 15:00, 2003-10-23 15:00
- Namespace
- zhone
- Source file
PDN-HDSL2-SHDSL-LINE-MIB- Digest
sha256:038bb55cbca3bda2788e0b4c4af5ddcc78c097fecc4e78f62d39fb8d349fddef
Description
The primary purpose of this MIB is to allow support of G.shdsl.bis based on the ITU Temporary Document, DC-R15, April 2003, until such a time as the `standard' MIB, HDSL2-SHDSL-LINE-MIB, RFC 3276, May 2002 is updated to support G.shdsl.bis. In addition to providing support for G.shdsl.bis, this MIB may support SHDSL objects that are unique to the enterprise. Decisions as far as how this MIB is supported with respect to the `standard' MIB will be made in an individual basis by those involved with specific projects; those decisions are not dictated here. The following documents should be referenced with respect to this MIB: [G.991.2] ITU-T G991.2 `Single-pair high-speed digital subscriber line (SHDSL) transceivers,' December 2003. [DC-R15] ITU Study Group 15 Temporary Document `G.shdsl.bis: Draft Text`, April 2003. [RFC 3276] Ray, B., Abbi, R. `HDSL2-SHDSL-LINE-MIB', May 2002. ===================================================================== == == == Copyright (C) 2004 Paradyne Corporation. == == == =====================================================================
Contact
Paradyne Networks, Inc. 8545 126th Avenue North Largo, FL 33733 www.paradyne.com General Comments to: mibwg_team@paradyne.com Editor Clay Sikes
Imports
| From | Symbols |
|---|---|
| HDSL2-SHDSL-LINE-MIB | Hdsl2Shdsl1DayIntervalCount, Hdsl2ShdslPerfCurrDayCount, Hdsl2ShdslPerfTimeElapsed, hdsl2ShdslEndpointSide, hdsl2ShdslEndpointThreshCRCanomalies, hdsl2ShdslEndpointThreshES, hdsl2ShdslEndpointThreshLOSWS, hdsl2ShdslEndpointThreshLoopAttenuation, hdsl2ShdslEndpointThreshSES, hdsl2ShdslEndpointThreshSNRMargin, hdsl2ShdslEndpointThreshUAS, hdsl2ShdslInvIndex, hdsl2ShdslSpanConfProfileName |
| IF-MIB | ifIndex |
| PDN-HEADER-MIB | pdn-interfaces |
| PerfHist-TC-MIB | PerfCurrentCount, PerfIntervalCount |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
HDSL2-SHDSL-LINE-MIB IANAifType-MIB IF-MIB PDN-HDSL2-SHDSL-LINE-MIB PDN-HEADER-MIB PerfHist-TC-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| PdnHdsl2ShdslWirePair TEXTUAL-CONVENTION This is the referenced pair of wires in a DSL Segment. HDSL2 only supports a single pair (wirePair1), while SHDSL supports an optional second pair (wirePair2), third pair (wirePair3), and a forth pair (wirePair4). | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| pdnHdsl2ShdslLineNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.6.23.0 | |||
| pdnHdsl2ShdslLineObjects OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.6.23.1 | |||
| pdnHdsl2ShdslSpanStatusExtTable OBJECT-TYPE This table extends the hdsl2ShdslSpanStatusTable defined in the HDSL2-SHDSL-LINE-MIB (the `standard' MIB) which provides overall information of DSL spans. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.1 | not-accessible | current | |
| pdnHdsl2ShdslSpanStatusExtEntry OBJECT-TYPE An entry extends the hdsl2ShdslSpanStatusEntry defined in [RFC 3276]. Each entry corresponds to a DSL line. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.1.1 | not-accessible | current | |
| pdnHdsl2ShdslStatusMaxAttainableLineRate OBJECT-TYPE Contains the maximum attainable line rate, in bps, in this DSL span. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.1.1.1 | Unsigned32 | read-only | current |
| pdnHdsl2ShdslStatusActualLineRate OBJECT-TYPE Contains the actual line rate, in bps, in this DSL span. This is based upon measurements made during line probing. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.1.1.2 | Unsigned32 | read-only | current |
| pdnHdsl2ShdslEndpointConfTable OBJECT-TYPE This table supports configuration parameters for segment endpoints in a HDSL2/SHDSL line. As this table is indexed by ifIndex, it MUST be maintained in a persistent manner. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.2 | not-accessible | current | |
| pdnHdsl2ShdslEndpointConfEntry OBJECT-TYPE Each entry represents a single segment endpoint in a HDSL2/SHDSL line. It is indexed by the ifIndex of the HDSL2/SHDSL line, the UnitId of the associated unit, the side of the unit, and the wire-pair of the associated modem. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.2.1 | not-accessible | current | |
| pdnHdsl2ShdslEndpointWirePair OBJECT-TYPE The wire-pair of the modem associated with this segment endpoint as per the PdnHdsl2ShdslWirePair textual convention. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.2.1.1 | PdnHdsl2ShdslWirePair | not-accessible | current |
| pdnHdsl2ShdslEndpointAlarmConfProfile OBJECT-TYPE This object configures the alarm threshold values to be used for this segment endpoint. The values are obtained from the alarm configuration profile referenced by this object. The value of this object is the index of the referenced profile in the hdsl2ShdslEndpointAlarmConfProfileTable, or NULL (a zero- length SnmpAdminString). If the value is a zero-length SnmpAdminString, the endpoint uses the default Alarm Configuration Profile for the associated span as per the hdsl2ShdslSpanConfAlarmProfile object in the hdsl2ShdslSpanConfTable. The default value of this object is a zero-length SnmpAdminString. Any attempt to set this object to a value that is not the value of the index for an active entry in the profile table, hdsl2ShdslEndpointAlarmConfProfileTable, MUST be rejected. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.2.1.2 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| pdnHdsl2ShdslEndpointCurrTable OBJECT-TYPE This table contains current status and performance information for segment endpoints in HDSL2/SHDSL Lines. As with other tables in this MIB indexed by ifIndex, entries in this table MUST be maintained in a persistent manner. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.3 | not-accessible | current | |
| pdnHdsl2ShdslEndpointCurrEntry OBJECT-TYPE Each entry contains status and performance information relating to a single segment endpoint. It is indexed by the ifIndex of the HDSL2/SHDSL line, the UnitId of the associated unit, the side of the unit, and the wire-pair of the associated modem. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1 | not-accessible | current | |
| pdnHdsl2ShdslEndpointCurrAtn OBJECT-TYPE The current loop attenuation for this endpoint as reported in a Network or Customer Side Performance Status message. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.1 | Integer32 (-127..128) | read-only | current |
| pdnHdsl2ShdslEndpointCurrSnrMgn OBJECT-TYPE The current SNR margin for this endpoint as reported in a Status Response/SNR message. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.2 | Integer32 (-127..128) | read-only | current |
| pdnHdsl2ShdslEndpointCurrStatus OBJECT-TYPE Contains the current state of the endpoint. This is a bitmap of possible conditions. The various bit positions are: noDefect There no defects on the line. powerBackoff Indicates enhanced Power Backoff. deviceFault Indicates a vendor-dependent diagnostic or self-test fault has been detected. dcContinuityFault Indicates vendor-dependent conditions that interfere with span powering such as short and open circuits. snrMarginAlarm Indicates that the SNR margin has dropped below the alarm threshold. loopAttenuationAlarm Indicates that the loop attenuation exceeds the alarm threshold. loswFailureAlarm Indicates a forward LOSW alarm. configInitFailure Endpoint failure during initialization due to paired endpoint not able to support requested configuration. protocolInitFailure Endpoint failure during initialization due to incompatible protocol used by the paired endpoint. noNeighborPresent Endpoint failure during initialization due to no activation sequence detected from paired endpoint. loopbackActive A loopback is currently active at this Segment Endpoint. This is intended to supplement ifOperStatus. Note that there is a 1-1 relationship between the status bits defined in this object and the notification thresholds defined elsewhere in this MIB. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.3 | Bits {noDefect(0), powerBackoff(1), deviceFault(2), dcContinuityFault(3), snrMarginAlarm(4), loopAttenuationAlarm(5), loswFailureAlarm(6), configInitFailure(7), protocolInitFailure(8), noNeighborPresent(9), loopbackActive(10)} | read-only | current |
| pdnHdsl2ShdslEndpointES OBJECT-TYPE Count of Errored Seconds (ES) on this endpoint since the xU was last restarted. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.4 | Counter32 | read-only | current |
| pdnHdsl2ShdslEndpointSES OBJECT-TYPE Count of Severely Errored Seconds (SES) on this endpoint since the xU was last restarted. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.5 | Counter32 | read-only | current |
| pdnHdsl2ShdslEndpointCRCanomalies OBJECT-TYPE Count of CRC anomalies on this endpoint since the xU was last restarted. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.6 | Counter32 | read-only | current |
| pdnHdsl2ShdslEndpointLOSWS OBJECT-TYPE Count of Loss of Sync Word (LOSW) Seconds on this endpoint since the xU was last restarted. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.7 | Counter32 | read-only | current |
| pdnHdsl2ShdslEndpointUAS OBJECT-TYPE Count of Unavailable Seconds (UAS) on this endpoint since the xU was last restarted. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.8 | Counter32 | read-only | current |
| pdnHdsl2ShdslEndpointCurr15MinTimeElapsed OBJECT-TYPE Total elapsed seconds in the current 15-minute interval. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.9 | Hdsl2ShdslPerfTimeElapsed | read-only | current |
| pdnHdsl2ShdslEndpointCurr15MinES OBJECT-TYPE Count of Errored Seconds (ES) in the current 15-minute interval. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.10 | PerfCurrentCount | read-only | current |
| pdnHdsl2ShdslEndpointCurr15MinSES OBJECT-TYPE Count of Severely Errored Seconds (SES) in the current 15-minute interval. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.11 | PerfCurrentCount | read-only | current |
| pdnHdsl2ShdslEndpointCurr15MinCRCanomalies OBJECT-TYPE Count of CRC anomalies in the current 15-minute interval. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.12 | PerfCurrentCount | read-only | current |
| pdnHdsl2ShdslEndpointCurr15MinLOSWS OBJECT-TYPE Count of Loss of Sync Word (LOSW) Seconds in the current 15-minute interval. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.13 | PerfCurrentCount | read-only | current |
| pdnHdsl2ShdslEndpointCurr15MinUAS OBJECT-TYPE Count of Unavailable Seconds (UAS) in the current 15-minute interval. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.14 | PerfCurrentCount | read-only | current |
| pdnHdsl2ShdslEndpointCurr1DayTimeElapsed OBJECT-TYPE Number of seconds that have elapsed since the beginning of the current 1-day interval. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.15 | Hdsl2ShdslPerfTimeElapsed | read-only | current |
| pdnHdsl2ShdslEndpointCurr1DayES OBJECT-TYPE Count of Errored Seconds (ES) during the current day as measured by pdnHdsl2ShdslEndpointCurr1DayTimeElapsed. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.16 | Hdsl2ShdslPerfCurrDayCount | read-only | current |
| pdnHdsl2ShdslEndpointCurr1DaySES OBJECT-TYPE Count of Severely Errored Seconds (SES) during the current day as measured by pdnHdsl2ShdslEndpointCurr1DayTimeElapsed. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.17 | Hdsl2ShdslPerfCurrDayCount | read-only | current |
| pdnHdsl2ShdslEndpointCurr1DayCRCanomalies OBJECT-TYPE Count of CRC anomalies during the current day as measured by pdnHdsl2ShdslEndpointCurr1DayTimeElapsed. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.18 | Hdsl2ShdslPerfCurrDayCount | read-only | current |
| pdnHdsl2ShdslEndpointCurr1DayLOSWS OBJECT-TYPE Count of Loss of Sync Word (LOSW) Seconds during the current day as measured by pdnHdsl2ShdslEndpointCurr1DayTimeElapsed. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.19 | Hdsl2ShdslPerfCurrDayCount | read-only | current |
| pdnHdsl2ShdslEndpointCurr1DayUAS OBJECT-TYPE Count of Unavailable Seconds (UAS) during the current day as measured by pdnHdsl2ShdslEndpointCurr1DayTimeElapsed. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.3.1.20 | Hdsl2ShdslPerfCurrDayCount | read-only | current |
| pdnHdsl2Shdsl15MinIntervalTable OBJECT-TYPE This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. This table contains live data from equipment. As such, it is NOT persistent. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.4 | not-accessible | current | |
| pdnHdsl2Shdsl15MinIntervalEntry OBJECT-TYPE An entry in the pdnHdsl2Shdsl15MinIntervalTable. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1 | not-accessible | current | |
| pdnHdsl2Shdsl15MinIntervalNumber OBJECT-TYPE Performance Data Interval number. 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.1 | Unsigned32 (1..96) | not-accessible | current |
| pdnHdsl2Shdsl15MinIntervalES OBJECT-TYPE Count of Errored Seconds (ES) during the interval. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.2 | PerfIntervalCount | read-only | current |
| pdnHdsl2Shdsl15MinIntervalSES OBJECT-TYPE Count of Severely Errored Seconds (SES) during the interval. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.3 | PerfIntervalCount | read-only | current |
| pdnHdsl2Shdsl15MinIntervalCRCanomalies OBJECT-TYPE Count of CRC anomalies during the interval. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.4 | PerfIntervalCount | read-only | current |
| pdnHdsl2Shdsl15MinIntervalLOSWS OBJECT-TYPE Count of Loss of Sync Word (LOSW) Seconds during the interval. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.5 | PerfIntervalCount | read-only | current |
| pdnHdsl2Shdsl15MinIntervalUAS OBJECT-TYPE Count of Unavailable Seconds (UAS) during the interval. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.4.1.6 | PerfIntervalCount | read-only | current |
| pdnHdsl2Shdsl1DayIntervalTable OBJECT-TYPE This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. This table contains live data from equipment. As such, it is NOT persistent. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.5 | not-accessible | current | |
| pdnHdsl2Shdsl1DayIntervalEntry OBJECT-TYPE An entry in the pdnHdsl2Shdsl1DayIntervalTable. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1 | not-accessible | current | |
| pdnHdsl2Shdsl1DayIntervalNumber OBJECT-TYPE History Data Interval number. Interval 1 is the the most recent previous day; interval 30 is 30 days ago. Intervals 2..30 are optional. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.1 | Unsigned32 (1..30) | not-accessible | current |
| pdnHdsl2Shdsl1DayIntervalMoniSecs OBJECT-TYPE The amount of time in the 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring data could not be collected for any reason. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.2 | Hdsl2ShdslPerfTimeElapsed | read-only | current |
| pdnHdsl2Shdsl1DayIntervalES OBJECT-TYPE Count of Errored Seconds (ES) during the 1-day interval as measured by pdnHdsl2Shdsl1DayIntervalMoniSecs. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.3 | Hdsl2Shdsl1DayIntervalCount | read-only | current |
| pdnHdsl2Shdsl1DayIntervalSES OBJECT-TYPE Count of Severely Errored Seconds (SES) during the 1-day interval as measured by pdnHdsl2Shdsl1DayIntervalMoniSecs. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.4 | Hdsl2Shdsl1DayIntervalCount | read-only | current |
| pdnHdsl2Shdsl1DayIntervalCRCanomalies OBJECT-TYPE Count of CRC anomalies during the 1-day interval as measured by pdnHdsl2Shdsl1DayIntervalMoniSecs. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.5 | Hdsl2Shdsl1DayIntervalCount | read-only | current |
| pdnHdsl2Shdsl1DayIntervalLOSWS OBJECT-TYPE Count of Loss of Sync Word (LOSW) Seconds during the 1-day interval as measured by pdnHdsl2Shdsl1DayIntervalMoniSecs. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.6 | Hdsl2Shdsl1DayIntervalCount | read-only | current |
| pdnHdsl2Shdsl1DayIntervalUAS OBJECT-TYPE Count of Unavailable Seconds (UAS) during the 1-day interval as measured by pdnHdsl2Shdsl1DayIntervalMoniSecs. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.5.1.7 | Hdsl2Shdsl1DayIntervalCount | read-only | current |
| pdnHdsl2ShdslSpanConfProfileExtTable OBJECT-TYPE This table extends the hdsl2ShdslSpanConfProfileTable defined in the HDSL2-SHDSL-LINE-MIB (the `standard' MIB) which supports definitions of span configuration profiles for DSL lines. IMPORTANT NOTE: This table is a 'pseudo-augments' of the hdsl2ShdslSpanConfProfileTable. Refer to the April 21, 2004 revision description for a discussion on why the table is indexed as opposed to augments. This table shares the same table table index as the hdsl2ShdslSpanConfProfileTable. However, this table does not have a row status object. Therefore, rows are created or deleted in this table by creating or deleting rows in the hdsl2ShdslSpanConfProfileTable. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.6 | not-accessible | current | |
| pdnHdsl2ShdslSpanConfProfileExtEntry OBJECT-TYPE An entry extends the hdsl2ShdslSpanConfProfileEntry defined in [RFC 3276]. Each entry corresponds to a profile for a span. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.6.1 | not-accessible | current | |
| pdnHdsl2ShdslSpanConfWireInterface OBJECT-TYPE This object configures number of wires that are operational for this span. The following values are defined for this object: twoWire(1) - 2-wire mode fourWire(2) - 4-wire mode sixWire(3) - 6-wire mode eightWire(4) - 8-wire mode | 1.3.6.1.4.1.1795.2.24.2.6.23.1.6.1.1 | INTEGER {twoWire(1), fourWire(2), sixWire(3), eightWire(4)} | read-create | current |
| pdnHdsl2ShdslSpanConfMinLineRate OBJECT-TYPE This object configures the minimum transmission rate, in multiples of 64 kbits per second, for the associated DSL Line in bits-per-second (bps). If the minimum line rate equals the maximum line rate (pdnHdsl2ShdslSpanConfMaxLineRate), the line rate is considered `fixed'. If the minimum line rate is less than the maximum line rate, the line is considered `rate-adaptive'. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.6.1.2 | Unsigned32 | read-create | current |
| pdnHdsl2ShdslSpanConfMaxLineRate OBJECT-TYPE This object configures the maximum transmission rate, in multiples of 64 kbits per second, for the associated DSL Line in bits-per-second (bps). If the minimum line rate (pdnHdsl2Shdsl- SpanConfMinLineRate) equals the maximum line rate, the line rate is considered `fixed'. if the minimum line rate is less than the maximum line rate, the line rate is considered `rate-adaptive'. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.6.1.3 | Unsigned32 | read-create | current |
| pdnHdsl2ShdslIfTable OBJECT-TYPE This table provides objects related to a particular interface and each entry corresponds to an ifIndex. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.7 | not-accessible | current | |
| pdnHdsl2ShdslIfEntry OBJECT-TYPE An entry in the pdnHdsl2ShdslIfTableTable. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.7.1 | not-accessible | current | |
| pdnHdsl2ShdslIfTableEquipMode OBJECT-TYPE This object allows the mode of the equipment to be set. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.7.1.1 | INTEGER {coMode(1), cpeMode(2)} | read-write | current |
| pdnHdsl2ShdslExtendedRateMode OBJECT-TYPE This object is used to select a mode of operation that supports extended rates. Some hardware implementations require different configurations base on whether or not higher speed rates are desired. For example, an implementation may require different code be loaded in a digital signal processor or an implementation may dictate that fewer subscriber ports are supported for a higher data rate. The payload5696(2) corresponds to the 5696 kbits per second rate specified in G.991.2, Annex F. | 1.3.6.1.4.1.1795.2.24.2.6.23.1.8 | INTEGER {disabled(1), payload5696(2)} | read-write | current |
| pdnHdsl2ShdslLineAFNs OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.6.23.2 | |||
| pdnHdsl2ShdslLineConformance OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.6.23.3 | |||
| pdnHdsl2ShdslLineCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.6.23.3.1 | |||
| pdnHdsl2ShdslLineGroups OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.6.23.3.2 | |||
| pdnHdsl2ShdslLineObjGroups OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1 | |||
| pdnHdsl2ShdslLineAfnGroups OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.6.23.3.2.2 | |||
| pdnHdsl2ShdslLineNtfyGroups OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.6.23.3.2.3 |
Notifications
| Name | OID | Status |
|---|---|---|
| pdnHdsl2ShdslLoopAttenCrossing NOTIFICATION-TYPE This notification indicates that the loop attenuation threshold (as per the hdsl2ShdslEndpointThreshLoopAttenuation value) has been reached/exceeded for the DSL segment endpoint. | 1.3.6.1.4.1.1795.2.24.2.6.23.0.1 | current |
| pdnHdsl2ShdslSNRMarginCrossing NOTIFICATION-TYPE This notification indicates that the SNR margin threshold (as per the hdsl2ShdslEndpointThreshSNRMargin value) has been reached/exceeded for the DSL segment endpoint. | 1.3.6.1.4.1.1795.2.24.2.6.23.0.2 | current |
| pdnHdsl2ShdslPerfESThresh NOTIFICATION-TYPE This notification indicates that the errored seconds threshold (as per the hdsl2ShdslEndpointThreshES value) has been reached/ exceeded for the DSL segment endpoint. | 1.3.6.1.4.1.1795.2.24.2.6.23.0.3 | current |
| pdnHdsl2ShdslPerfSESThresh NOTIFICATION-TYPE This notification indicates that the severely errored seconds threshold (as per the hdsl2ShdslEndpointThreshSES value) has been reached/exceeded for the DSL Segment Endpoint. | 1.3.6.1.4.1.1795.2.24.2.6.23.0.4 | current |
| pdnHdsl2ShdslPerfCRCanomaliesThresh NOTIFICATION-TYPE This notification indicates that the CRC anomalies threshold (as per the hdsl2ShdslEndpointThreshCRCanomalies value) has been reached/exceeded for the DSL Segment Endpoint. | 1.3.6.1.4.1.1795.2.24.2.6.23.0.5 | current |
| pdnHdsl2ShdslPerfLOSWSThresh NOTIFICATION-TYPE This notification indicates that the LOSW seconds threshold (as per the hdsl2ShdslEndpointThreshLOSWS value) has been reached/exceeded for the DSL segment endpoint. | 1.3.6.1.4.1.1795.2.24.2.6.23.0.6 | current |
| pdnHdsl2ShdslPerfUASThresh NOTIFICATION-TYPE This notification indicates that the unavailable seconds threshold (as per the hdsl2ShdslEndpointThreshUAS value) has been reached/exceeded for the HDSL2/SHDSL segment endpoint. | 1.3.6.1.4.1.1795.2.24.2.6.23.0.7 | current |
| pdnHdsl2ShdslpowerBackoff NOTIFICATION-TYPE This notification indicates that the bit setting for powerBackoff in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed. | 1.3.6.1.4.1.1795.2.24.2.6.23.0.8 | current |
| pdnHdsl2ShdsldeviceFault NOTIFICATION-TYPE This notification indicates that the bit setting for deviceFault in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed. | 1.3.6.1.4.1.1795.2.24.2.6.23.0.9 | current |
| pdnHdsl2ShdsldcContinuityFault NOTIFICATION-TYPE This notification indicates that the bit setting for dcContinuityFault in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed. | 1.3.6.1.4.1.1795.2.24.2.6.23.0.10 | current |
| pdnHdsl2ShdslconfigInitFailure NOTIFICATION-TYPE This notification indicates that the bit setting for configInitFailure in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed. | 1.3.6.1.4.1.1795.2.24.2.6.23.0.11 | current |
| pdnHdsl2ShdslprotocolInitFailure NOTIFICATION-TYPE This notification indicates that the bit setting for protocolInitFailure in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed. | 1.3.6.1.4.1.1795.2.24.2.6.23.0.12 | current |
| pdnHdsl2ShdslnoNeighborPresent NOTIFICATION-TYPE This notification indicates that the bit setting for noNeighborPresent in the pdnHdsl2ShdslEndpointCurrStatus object for this endpoint has changed. | 1.3.6.1.4.1.1795.2.24.2.6.23.0.13 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| pdnHdsl2ShdslLineMIBCompliance MODULE-COMPLIANCE The compliance statement for pdnHdsl2ShdslLineMIB entities which implement the pdnHdsl2ShdslLineMIB. | 1.3.6.1.4.1.1795.2.24.2.6.23.3.1.1 | current |
| pdnHdsl2ShdslSpanShdslStatusGroup OBJECT-GROUP This group supports objects for retrieving SHDSL-specific span related status. | 1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.1 | current |
| pdnHdsl2ShdslEndpointConfGroup OBJECT-GROUP This group supports objects for configuring parameters for segment endpoints in SHDSL lines. | 1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.2 | current |
| pdnHdsl2ShdslEndpointCurrGroup OBJECT-GROUP This group supports objects which provide current status and performance measurements relating to segment endpoints in DSL lines. | 1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.3 | current |
| pdnHdsl2Shdsl15MinIntervalGroup OBJECT-GROUP This group supports objects which maintain historic performance measurements relating to segment endpoints in DSL lines. | 1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.4 | current |
| pdnHdsl2Shdsl1DayIntervalGroup OBJECT-GROUP This group supports objects which maintain historic performance measurements relating to segment endpoints in DSL line in 1-day intervals. | 1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.5 | current |
| pdnHdsl2ShdslSpanConfProfileGroup OBJECT-GROUP This group supports objects that constitute configuration profiles for configuring span related parameters in DSL lines. | 1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.6 | current |
| pdnHdsl2ShdslIfTableGroup OBJECT-GROUP This group supports objects on a per-interface basis. | 1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.7 | current |
| pdnHdsl2ShdslExtendedRateModeGroup OBJECT-GROUP This group supports objects to select the extended base data rate mode. | 1.3.6.1.4.1.1795.2.24.2.6.23.3.2.1.8 | current |
| pdnHdsl2ShdslNotificationGroup NOTIFICATION-GROUP This group supports notifications of significant conditions associated with DSL lines. | 1.3.6.1.4.1.1795.2.24.2.6.23.3.2.3.1 | current |