PDN-FILTER-MIB
- Registered at
- 1.3.6.1.4.1.1795.2.24.2.23.11.3.6.1.4.1.1795.2.24.2.23.2
- Namespace
- zhone
- Source file
PDN-FILTER-MIB- Digest
sha256:dfa6d5d22d4f8ab3b7dd61846e563d66e9d248dccb94cc55813c69f9a6cbdc7f
Imports
| From | Symbols |
|---|---|
| IF-MIB | ifIndex |
| PDN-HEADER-MIB | pdn-filter |
| PDN-TC | VnidRange |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB IF-MIB PDN-FILTER-MIB PDN-HEADER-MIB PDN-TC SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| sysDevFilterMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.23.1 | |||
| sysDevFilter OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.23.1.1 | |||
| sysDevSNInjectionType OBJECT-TYPE The value of this object corresponds to the remote injection type | 1.3.6.1.4.1.1795.2.24.2.23.1.1.1 | INTEGER {ipFilter(1)} | not-accessible | mandatory |
| sysDevSNInjectionVnid OBJECT-TYPE This object corresponds to the vnid id (bound to an interface) on which filter injection is not supported or has failed | 1.3.6.1.4.1.1795.2.24.2.23.1.1.2 | VnidRange | not-accessible | mandatory |
| sysDevFilterConfigTable OBJECT-TYPE This table allows the user to configure filtering information. Every filter is comprised of a number of rules(see SysDevRuleTable). When a filter is bound to an interface, all the rules of that particular filter apply to that particular interface. Also the same filter maybe bound to several interfaces. This table only allows us to configure information about a particular filter. this table is indexed by sysDevFilterName. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.3 | not-accessible | mandatory | |
| sysDevFilterConfigTableEntry OBJECT-TYPE Describes a specific entry of the filter configuration table. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.3.1 | not-accessible | mandatory | |
| sysDevFilterIndex OBJECT-TYPE The value of this object is an index of the filter. This object is used by sysDevFilterConfigTable to identify the row in the table. When creating new row of this table the value of this object may be obtained by retreiving the value of sysDevFilterIndexNext. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.3.1.1 | INTEGER | read-only | mandatory |
| sysDevFilterName OBJECT-TYPE The value of this object corresponds directly to the name of the filter. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.3.1.2 | DisplayString (SIZE(1..12)) | read-write | mandatory |
| sysDevFilterType OBJECT-TYPE The value of this object corresponds directly to the type of the filter. Ethernet is layer 2 filter, Ip are layer 3 filters (include layer 4 protocol filtering). | 1.3.6.1.4.1.1795.2.24.2.23.1.1.3.1.3 | INTEGER {layer1(1), layer2(2), layer3(3), layer4(4), layer5(5), layer6(6), layer7(7), unknown(8)} | read-write | mandatory |
| sysDevDefFilterAction OBJECT-TYPE The value of this object corresponds to the default action taken on a particular IP packet based on the filter rule. forward - the packet is forwarded discard - the packet is discarded. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.3.1.4 | INTEGER {forward(1), discard(2)} | read-write | mandatory |
| sysDevFilterNumOfDynamicRules OBJECT-TYPE This object corresponds to the number of dynamic rules configured for this filter. Default is zero. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.3.1.5 | INTEGER | read-only | mandatory |
| sysDevFilterNumOfStaticRules OBJECT-TYPE This object corresponds to the number of static rules configured for this filter. Default is zero | 1.3.6.1.4.1.1795.2.24.2.23.1.1.3.1.6 | INTEGER | read-only | mandatory |
| sysDevFilterRefCount OBJECT-TYPE This object corresponds to the number of references for this filter by the various interfaces of the system For Example if filter 'abc' is bound to two of the DSL interfaces as inbound filter then the reference count for this filter is 2. Filters can be deleted from the system (by a user) only if the reference count equals 0. (the filter is not bound to any interfaces). The default is 0. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.3.1.7 | INTEGER | read-only | mandatory |
| sysDevFilterRowStatus OBJECT-TYPE The object is used to add or delete a row from this table. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.3.1.8 | RowStatus | read-write | mandatory |
| sysDevL2FilterRuleConfigTable OBJECT-TYPE This table allows the user to configure the rules of each IP filter. When a filter is bound to an interface, all the rules of that particular filter apply to that particular interface. Also, the same filter may be found to several interfaces. This table is indexed by sysDevL2FilterRuleIndex. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.4 | not-accessible | mandatory | |
| sysDevL2FilterRuleConfigTableEntry OBJECT-TYPE Describes a specific entry of the filter rule configuration table. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.4.1 | not-accessible | mandatory | |
| sysDevL2FilterRuleIndex OBJECT-TYPE The value of this object is an index of the filter rule table. This object is used by sysDevFilterConfigTable to identify the row in the table. When creating new row of this table the value of this object may be obtained by retreiving the value of sysDevL2FilterRuleIndexNext. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.4.1.1 | INTEGER | read-only | mandatory |
| sysDevL2FilterRuleName OBJECT-TYPE The value of this object corresponds directly to the name of the rule. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.4.1.2 | DisplayString (SIZE(1..12)) | read-write | mandatory |
| sysDevL2FilterRuleEtherFrameType OBJECT-TYPE This value descirbes if Ethernet frame types defined that can be transmitted. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.4.1.3 | INTEGER {dix(1), snap(2)} | read-write | mandatory |
| sysDevL2FilterRuleEtherType OBJECT-TYPE This value descirbes if Ethernet types defined in RFC1700 are specified as range or one single type. It is possible to create rule using a range of types and therefore next object is added to create start of the range.This object is the first in range and the value of it has to be smaller or equal to a hex Ethernet type value entered in sysDevL2FilterRuleEtherTypeRangeEnds. If this object specifies that the value used is a single type than sysDevL2FilterRuleEtherTypeRangeEnds will not be considered valid. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.4.1.4 | INTEGER {range(1), singleType(2)} | read-write | mandatory |
| sysDevL2FilterRuleEtherTypeRangeStarts OBJECT-TYPE This value corresponds to Ethernet types defined in RFC1700. It is possible to create rule using a range of types and therefore next object is added to create range. This object is the first in range and the value of it has to be smaller or equal to a hex Ethernet type value entered next. If the value of sysDevL2FilterRuleEtherType is singleType(2) then only this value is considered. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.4.1.5 | INTEGER | read-write | mandatory |
| sysDevL2FilterRuleEtherTypeRangeEnds OBJECT-TYPE This value corresponds to Ethernet types defined in RFC1700. It is possible to create rule using a range of types and therefore this object is added to create range. This object is the second value in the range. The value of it has to be larger or equal to a hex Ethernet type value entered previously. This object is not considered valid if the value of sysDevL2FilterRuleEtherType is singleType(2). | 1.3.6.1.4.1.1795.2.24.2.23.1.1.4.1.6 | INTEGER | read-write | mandatory |
| sysDevL2FilterRuleAction OBJECT-TYPE The value of this object specify the action to be done if the rule is matched to a packet. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.4.1.7 | INTEGER {forward(1), discard(2)} | read-write | mandatory |
| sysDevL2FilterRuleRowStatus OBJECT-TYPE The object is used to add or delete a row from this table. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.4.1.8 | RowStatus | read-write | mandatory |
| sysDevFilterBindingTable OBJECT-TYPE This table allows us to bind filters to a particular interface. As such this table is indexed by ifIndex, and by sysDevFilterBindingIndex. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.5 | not-accessible | mandatory | |
| sysDevFilterBindingTableEntry OBJECT-TYPE Describes a specific entry of the filter binding table. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.5.1 | not-accessible | mandatory | |
| sysDevFilterBindingIndex OBJECT-TYPE The value of this object corresponds directly to the filter index from sysDevFilterConfigTable. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.5.1.1 | INTEGER | read-only | mandatory |
| sysDevFilterBindingDirection OBJECT-TYPE The value of this object corresponds directly to the type of the filter which needs to be bound to a particular interface. inboundFilter - This indicates that the filter is applied to the packets coming in to the interface. outboundFilter - this indicates that the filter is applied to packets going out the interface. inboundOutboundFilter - this indicates that the filter is applied packets going out the interface and to packets coming in to the interface. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.5.1.2 | INTEGER {inboundFilter(1), outboundFilter(2), inboundOutboundFilter(3)} | read-only | mandatory |
| sysDevFilterBindingAdminStatus OBJECT-TYPE The value of this is used to configure admin status of filter binding. If admin status is up(1) that means that the binding is active. If the status is down(2) it means that this binding is inactive for specified interface. If the filter is bound to more than one interface the binings on the other interfaces will have to be configured separately. To read this object use sysDevFilterBindingOperStatus. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.5.1.3 | INTEGER {up(1), down(2)} | read-write | mandatory |
| sysDevFilterBindingOperStatus OBJECT-TYPE The value of this is used to read oper status of filter binding. If oper status is up(1) that means that the binding is active. If the status is down(2) it means that this binding is inactive for specified interface. To configure this object use sysDevFilterBindingAdminStatus. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.5.1.4 | INTEGER {up(1), down(2)} | read-write | mandatory |
| sysDevFilterBindingRowStatus OBJECT-TYPE This object is used to add or delete a row from this table. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.5.1.5 | RowStatus | read-write | mandatory |
| sysDevFilterIndexNext OBJECT-TYPE This object contains an appropriate value to be used for sysDevFilterConfigTable. The value of 0 indicates that no unassigned entries are available. To obtain sysDevFilterIndex value for the new entry the manager issues a management protocol retrieval operation to obtain a current value of this object. After each retrieval, the agent must modify the value to the next unassigned index to prevent assignment of the same value to multiple management systems. A management systems should repeat the read to obtain a new value should an attempt to create the new row using previously returned index fail. As this is a scalar object if the mib walk is done on this object it would return the next unused value. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.6 | INTEGER | read-only | mandatory |
| sysDevL2FilterRuleIndexNext OBJECT-TYPE This object contains an appropriate value to be used for sysDevL2FilterRuleConfigTable. The value of 0 indicates that no unassigned entries are available. To obtain sysDevL2FilterRuleIndex value for the new entry the manager issues a management protocol retrieval operation to obtain a current value of this object. After each retrieval, the agent must modify the value to the next unassigned index to prevent assignment of the same value to multiple management systems. A management systems should repeat the read to obtain a new value should an attempt to create the new row using previously returned index fail. As this is a scalar object if the mib walk is done on this object it would return the next unused value. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.7 | INTEGER | read-only | mandatory |
| sysDevFilterToRuleBindingTable OBJECT-TYPE This table allows us to bind filters to a particular rules. As such this table is indexed by sysDevFilterToRuleBindingIndex, and by sysDevL2FilterIndex. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.8 | not-accessible | mandatory | |
| sysDevFilterToRuleBindingTableEntry OBJECT-TYPE Describes a specific entry of the filter binding table. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.8.1 | not-accessible | mandatory | |
| sysDevFilterToRuleBindingIndex OBJECT-TYPE The value of this object corresponds directly to the rule index from sysDevL2FilterRuleTable. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.8.1.1 | INTEGER | read-only | mandatory |
| sysDevFilterToRulePriority OBJECT-TYPE Internally the table will be sorted based on this object- in the increasing order of priority. The highest priority being 1. The table cannot be created without rules being specified. The table lookups will be done on the sorted table. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.8.1.2 | INTEGER | read-write | mandatory |
| sysDevFilterToRuleBindingRowStatus OBJECT-TYPE This object is used to add or delete a row from this table. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.8.1.3 | RowStatus | read-write | mandatory |
| sysDevL3FilterRuleConfigTable OBJECT-TYPE This table allows the user to configure the rules for layer three filter. When a filter is bound to an interface, all the rules of that particular filter apply to the specified interface. Also, the same filter may be bound to several interfaces. This table is indexed by sysDevL3FilterRuleIndex. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.9 | not-accessible | mandatory | |
| sysDevL3FilterRuleConfigTableEntry OBJECT-TYPE Describes a specific entry of the filter rule configuration table. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.9.1 | not-accessible | mandatory | |
| sysDevL3FilterRuleIndex OBJECT-TYPE The value of this object is an index of the filter rule table. This object is used by sysDevFilterConfigTable to identify the row in the table. When creating new row of this table the value of this object may be obtained by retreiving the value of sysDevL3FilterRuleIndexNext. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.9.1.1 | INTEGER | read-only | mandatory |
| sysDevL3FilterRuleName OBJECT-TYPE The value of this object corresponds directly to the name of the rule. It is highly recommended that the RuleName be unique user friendly name. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.9.1.2 | DisplayString | read-write | mandatory |
| sysDevL3FilterRuleSrcAddress OBJECT-TYPE The value of this object corresponds directly to a source IP Address. This object could be set if IP packets need to be filtered based on where it is coming from. Setting this object to 0.0.0.0 disables source IP address comparison. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.9.1.3 | IpAddress | read-write | mandatory |
| sysDevL3FilterRuleSrcAddrMask OBJECT-TYPE The value of this object corresponds directly to an source IP Address Mask. The value of this object is bitwise anded with the source address within the IP packet. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.9.1.4 | IpAddress | read-write | mandatory |
| sysDevL3FilterRuleSrcAddrAction OBJECT-TYPE This object specifies action taken with the source address filtering. If the selection allows any SrcAddr (effectively ignoring this filed) than 'none' (3) is valid choice for this object. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.9.1.5 | INTEGER {forward(1), discard(2), none(3)} | read-write | mandatory |
| sysDevL3FilterRuleSrcPortNum OBJECT-TYPE The UDP or TCP port number of the source on which this filter is applied. This object is used as a start of range if the source comparison type is in-range or out-range. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.9.1.6 | INTEGER | read-write | mandatory |
| sysDevL3FilterRuleMaxSrcPortNum OBJECT-TYPE The maximum UDP or TCP port number of the source on which this filter is applied. This object is valid only if the source comparison type is in-range or out-range | 1.3.6.1.4.1.1795.2.24.2.23.1.1.9.1.7 | INTEGER | read-write | mandatory |
| sysDevL3FilterRuleSrcCompType OBJECT-TYPE The value of this object corresponds to the type of comparison which is to be made for source based filtering for the particular rule of the filter. none - no comparison is to be made. eq - equal to neq - not equal to gt - greater than lt - less than inRange - the source port number of the TCP or UDP packet is within a specified range. outRange - the source port number of the TCP or UDP packet lies outside a specified range. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.9.1.8 | INTEGER {none(1), eq(2), neq(3), gt(4), lt(5), inRange(6), outRange(7)} | read-write | mandatory |
| sysDevL3FilterRuleDestAddress OBJECT-TYPE The value of this object corresponds directly to an destination IP Address. This object could be set if IP packets need to be filtered based on where it is going to. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.9.1.9 | IpAddress | read-write | mandatory |
| sysDevL3FilterRuleDestAddrMask OBJECT-TYPE The value of this object corresponds directly to an destination IP Address Mask. The value of this object is bitwise anded with the destination address within the IP packet. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.9.1.10 | IpAddress | read-write | mandatory |
| sysDevL3FilterRuleDestAddrAction OBJECT-TYPE This object specifies action taken for destination address filtering. If the selection allows any DestAddr (effectively ignoring this filed) than 'none' (3) is valid choice for this object. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.9.1.11 | INTEGER {forward(1), discard(2), none(3)} | read-write | mandatory |
| sysDevL3FilterRuleDestPortNum OBJECT-TYPE The UDP or TCP port number of the destination on which this filter is applied. This object is used as a start of range if the source comparison type is in-range or out-range. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.9.1.12 | INTEGER | read-write | mandatory |
| sysDevL3FilterRuleMaxDestPortNum OBJECT-TYPE The maximum UDP or TCP port number of the destination on which this filter is applied. This object is valid only if the destination comparison type is in-range or out-range | 1.3.6.1.4.1.1795.2.24.2.23.1.1.9.1.13 | INTEGER | read-write | mandatory |
| sysDevL3FilterRuleDestCompType OBJECT-TYPE The value of this object corresponds to the type of comparison which is to be made for destination based filtering for the particular rule of the filter. none - no comparison is to be made. eq - equal to neq - not equal to gt - greater than lt - less than inRange - the source port number of the TCP or UDP packet is within a specified range. outRange - the source port number of the TCP or UDP packet lies outside a specified range. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.9.1.14 | INTEGER {none(1), eq(2), neq(3), gt(4), lt(5), inRange(6), outRange(7)} | read-write | mandatory |
| sysDevL3FilterRuleProtocolTypeUdp OBJECT-TYPE The value of this object corresponds to the action taken on a particular UDP packet based on the source/ destination port comparison rule. If the selection allows any Udp packet (effectively ignoring this filed) than 'none' (3) is valid choice for this object. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.9.1.15 | INTEGER {forward(1), discard(2), none(3)} | read-write | mandatory |
| sysDevL3FilterRuleProtocolTypeTcp OBJECT-TYPE The value of this object corresponds to the action taken on a particular TCP packet bases on the source/ destination port comparison rule. If the selection allows any Tcp packet (effectively ignoring this filed) than 'none' (3) is valid choice for this object. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.9.1.16 | INTEGER {forward(1), discard(2), none(3)} | read-write | mandatory |
| sysDevL3FilterRuleProtocolTypeIcmp OBJECT-TYPE The value of this object corresponds to the action taken on a particular ICMP packet bases on the protocol type comparison rule. If the selection allows any Icmp packet (effectively ignoring this filed) than 'none' (3) is valid choice for this object. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.9.1.17 | INTEGER {forward(1), discard(2), none(3)} | read-write | mandatory |
| sysDevL3FilterRuleRowStatus OBJECT-TYPE The object is used to add or delete a row from this table. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.9.1.18 | RowStatus | read-write | mandatory |
| sysDevL3FilterRuleIndexNext OBJECT-TYPE This object contains an appropriate value to be used for sysDevL3FilterRuleConfigTable. The value of 0 indicates that no unassigned entries are available. To obtain sysDevL3FilterRuleIndex value for the new entry the manager issues a management protocol retrieval operation to obtain a current value of this object. After each retrieval, the agent must modify the value to the next unassigned index to prevent assignment of the same value to multiple management systems. A management systems should repeat the read to obtain a new value should an attempt to create the new row using previously returned index fail. As this is a scalar object if the mib walk is done on this object it would return the next unused value. | 1.3.6.1.4.1.1795.2.24.2.23.1.1.10 | INTEGER | read-only | mandatory |
| sysDevIpFilter OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.23.1.2 | |||
| sysDevIpFilterConfigTable OBJECT-TYPE This table allows the user to configure filtering information. Every filter is comprised of a number of rules(see SysDevRuleTable). When a filter is bound to an interface, all the rules of that particular filter apply to that particular interface. Also the same filter maybe bound to several interfaces. This table only allows us to configure information about a particular filter. this table is indexed by sysDevIpFilterName. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.1 | not-accessible | mandatory | |
| sysDevIpFilterConfigTableEntry OBJECT-TYPE Describes a specific entry of the filter configuration table. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.1.1 | not-accessible | mandatory | |
| sysDevIpFilterName OBJECT-TYPE The value of this object corresponds directly to the name of the filter. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.1.1.1 | DisplayString (SIZE(1..12)) | read-only | mandatory |
| sysDevIpDefFilterAction OBJECT-TYPE The value of this object corresponds to the default action taken on a particular IP packet based on the filter rule. forward - the packet is forwarded discard - the packet is discarded. delete - the rule of a particular filter or the filter as a whole is deleted. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.1.1.2 | INTEGER {forward(1), discard(2), delete(3)} | read-write | mandatory |
| sysDevIpFilterNumOfDynamicRules OBJECT-TYPE This object corresponds to the number of dynamic rules configured for this filter | 1.3.6.1.4.1.1795.2.24.2.23.1.2.1.1.3 | INTEGER | read-only | mandatory |
| sysDevIpFilterNumOfStaticRules OBJECT-TYPE This object corresponds to the number of static rules configured for this filter | 1.3.6.1.4.1.1795.2.24.2.23.1.2.1.1.4 | INTEGER | read-only | mandatory |
| sysDevIpFilterRefCount OBJECT-TYPE This object corresponds to the number of references for this filter by the various interfaces of the system For Example if filter 'abc' is bound to two of the DSL interfaces as input filters. then the reference count for this filter is 2. if a filter 'def' is bound to the 10BaseT interface as both an input and an output filter. The reference count for this filter would be 2. Filters can be deleted from the system (by a user) only if the reference count equals 0 | 1.3.6.1.4.1.1795.2.24.2.23.1.2.1.1.5 | INTEGER | read-only | mandatory |
| sysDevIpFilterTcpAckFilterAction OBJECT-TYPE The value of this object corresponds to the default action taken on the first TCP ACK packet of the TCP connection. This object is not supported for MCC. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.1.1.6 | INTEGER {forward(1), discard(2), noOp(3)} | read-write | mandatory |
| sysDevIpFilterDhcpFilterAction OBJECT-TYPE The value of this object corresponds to the default action taken on the DHCP transaction messages. This object is not supported for mcc. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.1.1.7 | INTEGER {forward(1), discard(2), noOp(3)} | read-write | mandatory |
| sysDevIpFilterRowStatus OBJECT-TYPE The object is used to add or delete a row from this table. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.1.1.8 | RowStatus | read-write | mandatory |
| sysDevIpFilterRuleConfigTable OBJECT-TYPE This table allows the user to configure the rules of each IP filter. When a filter is bound to an interface, all the rules of that particular filter apply to that particular interface. Also, the same filter may be found to several interfaces. This table is indexed by sysDevIpFilterName and sysDevIpFilterRuleNumber. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.2 | not-accessible | deprecated | |
| sysDevIpFilterRuleConfigTableEntry OBJECT-TYPE Describes a specific entry of the filter rule configuration table. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.2.1 | not-accessible | deprecated | |
| sysDevIpRuleFilterName OBJECT-TYPE The value of this object corresponds directly to the name of the filter. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.2.1.1 | DisplayString (SIZE(1..12)) | read-only | deprecated |
| sysDevIpFilterRuleNumber OBJECT-TYPE The value of this object corresponds directly to a rule within a particular filter. If the value of this object is 0, then the sets apply to the filter as a whole. For example one may want to delete the whole filter. for a get only the name of the filter is returned. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.2.1.2 | INTEGER (1..33) | read-only | deprecated |
| sysDevIpFilterRuleSrcAddress OBJECT-TYPE The value of this object corresponds directly to an source IP Address. This object could be set if IP packets need to be filtered based on where it is coming from. Setting this object to 0.0.0.0 disables source IP address comparison. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.2.1.3 | IpAddress | read-write | deprecated |
| sysDevIpFilterRuleSrcAddrMask OBJECT-TYPE The value of this object corresponds directly to an source IP Address Mask. The value of this object is bitwise anded with the source address within the IP packet and then compared with the sysDevIPFilterSrcAddress. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.2.1.4 | IpAddress | read-write | deprecated |
| sysDevIpFilterRuleSrcAddrCompEnable OBJECT-TYPE This object enables or disables the source address comparison. It is not supported for MCC. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.2.1.5 | INTEGER {enable(1), disable(2), noOp(3)} | read-write | deprecated |
| sysDevIpFilterRuleSrcPortNum OBJECT-TYPE The UDP or TCP port number of the source on which this filter is applied. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.2.1.6 | INTEGER (0..65535) | read-write | deprecated |
| sysDevIpFilterRuleMaxSrcPortNum OBJECT-TYPE The maximum UDP or TCP port number of the source on which this filter is applied. This object is valid only if the source comparison type is in-range or out-range | 1.3.6.1.4.1.1795.2.24.2.23.1.2.2.1.7 | INTEGER (0..65535) | read-write | deprecated |
| sysDevIpFilterRuleSrcCompType OBJECT-TYPE The value of this object corresponds to the type of comparison which is to be made for source based filtering for the particular rule of the filter. none - no comparison is to be made. eq - equal to neq - not equal to gt - greater than lt - less than inRange - the source port number of the TCP or UDP packet is within a specified range. outRange - the source port number of the TCP or UDP packet lies outside a specified range. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.2.1.8 | INTEGER {none(1), eq(2), neq(3), gt(4), lt(5), inRange(6), outRange(7)} | read-write | deprecated |
| sysDevIpFilterRuleDestAddress OBJECT-TYPE The value of this object corresponds directly to an destination IP Address. This object could be set if IP packets need to be filtered based on where it is going to. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.2.1.9 | IpAddress | read-write | deprecated |
| sysDevIpFilterRuleDestAddrMask OBJECT-TYPE The value of this object corresponds directly to an destination IP Address Mask. The value of this object is bitwise anded with the destination address within the IP packet and then compared with the sysDevIPFilterRuleDestAddress | 1.3.6.1.4.1.1795.2.24.2.23.1.2.2.1.10 | IpAddress | read-write | deprecated |
| sysDevIpFilterRuleDestAddrCompEnable OBJECT-TYPE This object enables or disables the destination address comparison. It is not supported for MCC. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.2.1.11 | INTEGER {enable(1), disable(2), noOp(3)} | read-write | deprecated |
| sysDevIpFilterRuleDestPortNum OBJECT-TYPE The UDP or TCP port number of the destination on which this filter is applied | 1.3.6.1.4.1.1795.2.24.2.23.1.2.2.1.12 | INTEGER (0..65535) | read-write | deprecated |
| sysDevIpFilterRuleMaxDestPortNum OBJECT-TYPE The maximum UDP or TCP port number of the destination on which this filter is applied. This object is valid only if the destination comparison type is in-range or out-range | 1.3.6.1.4.1.1795.2.24.2.23.1.2.2.1.13 | INTEGER (0..65535) | read-write | deprecated |
| sysDevIpFilterRuleDestCompType OBJECT-TYPE The value of this object corresponds to the type of comparison which is to be made for destination based filtering for the particular rule of the filter. none - no comparison is to be made. eq - equal to neq - not equal to gt - greater than lt - less than inRange - the source port number of the TCP or UDP packet is within a specified range. outRange - the source port number of the TCP or UDP packet lies outside a specified range. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.2.1.14 | INTEGER {none(1), eq(2), neq(3), gt(4), lt(5), inRange(6), outRange(7)} | read-write | deprecated |
| sysDevIpFilterRuleType OBJECT-TYPE The value of this object corresponds to the type of type of rule configured static - This indicates that the rule was configured by an NMS either by SNMP, console or using telnet dynamic - this indicates that the rule was configured by the the system for end-users who have obtaimed an IP address using the DHCP protocol. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.2.1.15 | INTEGER {static(1), dynamic(2)} | read-only | deprecated |
| sysDevIpFilterRuleProtocolTypeUdp OBJECT-TYPE The value of this object corresponds to the action taken on a particular UDP packet based on the source/ destination port comparison rule. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.2.1.16 | INTEGER {forward(1), discard(2)} | read-write | deprecated |
| sysDevIpFilterRuleProtocolTypeTcp OBJECT-TYPE The value of this object corresponds to the action taken on a particular TCP packet bases on the source/ destination port comparison rule. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.2.1.17 | INTEGER {forward(1), discard(2)} | read-write | deprecated |
| sysDevIpFilterRuleProtocolTypeIcmp OBJECT-TYPE The value of this object corresponds to the action taken on a particular ICMP packet bases on the protocol type comparison rule. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.2.1.18 | INTEGER {forward(1), discard(2)} | read-write | deprecated |
| sysDevIpFilterRuleRowStatus OBJECT-TYPE The object is used to add or delete a row from this table. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.2.1.19 | RowStatus | read-write | deprecated |
| sysDevMaxNumOfInputIpFilters OBJECT-TYPE The value of this object corresponds directly to the max number of input IP filters supported by each device. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.3 | INTEGER | read-only | mandatory |
| sysDevMaxNumOfOutputIpFilters OBJECT-TYPE The value of this object corresponds directly to the max number of Output IP filters supported by each device. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.4 | INTEGER | read-only | mandatory |
| sysDevIpFilterBindingTable OBJECT-TYPE This table allows us to bind filters to a particular interface. As such this table is doubly indexed by ifIndex and sysDevIpBindingFilterName. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.5 | not-accessible | mandatory | |
| sysDevIpFilterBindingTableEntry OBJECT-TYPE Describes a specific entry of the filter binding table. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.5.1 | not-accessible | mandatory | |
| sysDevIpBindingFilterName OBJECT-TYPE The value of this object corresponds directly to the name of the filter. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.5.1.1 | DisplayString (SIZE(1..12)) | read-only | mandatory |
| sysDevIpBindingFilterType OBJECT-TYPE The value of this object corresponds directly to the type of the filter which needs to be bound to a particular interface. inputFilter - This indicates that the filter is applied to the packets coming in to the interface. outputFilter - this indicates that the filter is applied to packets going out the interface. inputOutputFilter - this indicates that the filter is applied packets going out the interface and to packets coming in to the interface. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.5.1.2 | INTEGER {inputFilter(1), outputFilter(2), inputOutputFilter(3)} | read-write | mandatory |
| sysDevIpBindingFilterRowStatus OBJECT-TYPE This object is used to add or delete a row from this table. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.5.1.3 | RowStatus | read-write | mandatory |
| sysDevIpFilterSNBindingTable OBJECT-TYPE This table allows us to bind filters to a particular interface on portcards. This table is indexed by ifIndex, sysDevIpSNBindingVnidId and sysDevIpSNBindingFilterName. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.6 | not-accessible | mandatory | |
| sysDevIpFilterSNBindingTableEntry OBJECT-TYPE Describes a specific entry of the SNfilter binding table. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.6.1 | not-accessible | mandatory | |
| sysDevIpSNBindingVnidId OBJECT-TYPE The VNID Id number of the virtual network to which this filter is bound. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.6.1.1 | VnidRange | read-only | mandatory |
| sysDevIpSNBindingFilterName OBJECT-TYPE The value of this object corresponds directly to the name of the filter. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.6.1.2 | DisplayString (SIZE(1..12)) | read-only | mandatory |
| sysDevIpSNBindingFilterType OBJECT-TYPE The value of this object corresponds directly to the type of the filter which needs to be bound to a particular interface. inputFilter - This indicates that the filter is applied to the packets coming in to the interface. outputFilter - this indicates that the filter is applied to packets going out the interface. inputOutputFilter - this indicates that the filter is applied packets going out the interface and to packets coming in to the interface. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.6.1.3 | INTEGER {inputFilter(1), outputFilter(2), inputOutputFilter(3)} | read-write | mandatory |
| sysDevIpSNBindingFilterRowStatus OBJECT-TYPE This object is used to add or delete a row from this table. | 1.3.6.1.4.1.1795.2.24.2.23.1.2.6.1.4 | RowStatus | read-write | mandatory |
| sysDevIpInputPacketsFiltered OBJECT-TYPE The number of IP packets that have been filtered on all the incoming interfaces due to not matching programmed filter entries on interfaces that are activated for IP filtering.This is supported on MCC only | 1.3.6.1.4.1.1795.2.24.2.23.1.2.7 | Counter | read-only | mandatory |
| sysDevIpOutputPacketsFiltered OBJECT-TYPE The number of IP packets that have been filtered on all the outgoing interfaces due to not matching programmed filter entries on interfaces that are activated for IP filtering.This is supported on MCC only | 1.3.6.1.4.1.1795.2.24.2.23.1.2.8 | Counter | read-only | mandatory |
| sysDevFilterMIBTraps OBJECT-IDENTITY | 1.3.6.1.4.1.1795.2.24.2.23.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| sysDevSNInjectionFailureTrap NOTIFICATION-TYPE This trap signifies that the injection of filters to SN failed It is of warning class | 1.3.6.1.4.1.1795.2.24.2.23.2.0.22 | |
| sysDevSNInjectionIncompatibleTrap NOTIFICATION-TYPE This trap signifies that the injection of filters is not supported by the SN. It is of warning class | 1.3.6.1.4.1.1795.2.24.2.23.2.0.23 |