MIBs Depot

PDN-DSL-ATM-BOND-MIB

Registered at
1.3.6.1.4.1.1795.2.24.2.6.33
Last updated
2005-08-03 00:00
Organization
Paradyne Networks, Inc. MIB Working Group
Revisions
2005-08-03 00:00, 2005-08-01 00:00, 2005-07-26 00:00, 2005-06-07 00:00
Namespace
zhone
Source file
PDN-DSL-ATM-BOND-MIB
Digest
sha256:c104695ffe4937a4af5ee6dc5a6c78cc38b669cc62cbd4308b7b5b49f336bd74

Description

This MIB module defines a collection of objects for managing the bonding of multiple digital subscriber lines (DSL) to transport ATM streams. At the time this modules was defined, neither the IETF nor the ATM Forum had any indication of plans to produce MIB modules to support the bonding of multiple digital subscriber lines to transport ATM streams. As a result, these objects may be a `temporary' solution should a standards body produces a module to support this type of bonding. The following documents are informational references with respect to this MIB module: [G.998.1] ITU-T G.998.1, `ATM-based Multi-Pair Bonding', January 2005. [RFC 2494] Fowler, D., `Definitions of Managed Objects for the DS0 and DS0 Bundle Interface type', January 1999. [T1E1.4] ANSI T1E1.4/2003-334R6, American National Standards Institute (ANSI), `Draft proposed American National Standard, ATM-based multi-pair bonding', October 2004. [TR-090] Abbi, R., DSL Forum Technical Report Technical Report TR-090, `Protocol Independent Object Model for Managing Next Generation ADSL Technologies', December 2004. ================================================================= == == == Copyright (C) 2005 Paradyne Networks, Inc. == == == =================================================================

Contact

Paradyne Networks, Inc. 8545 126th Avenue North Largo, FL 33733 www.paradyne.com General Comments to: mibwg_team@paradyne.com Editor(s) Clay Sikes

Imports

FromSymbols
IF-MIBInterfaceIndex
PDN-HEADER-MIBpdn-interfaces
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, RowStatus, TEXTUAL-CONVENTION, TestAndIncr, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
PDN-DSL-ATM-BOND-MIB
PDN-HEADER-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
PdnDslAtmBondAsmRxStatusTC
TEXTUAL-CONVENTION
The status of Autonomous Status Message (ASM) received on a link in the past one second. The bonding entity is required to send ASM status messages at no less a frequency than once per second per link.
current
PdnDslAtmBondGroupBearerNumberTC
TEXTUAL-CONVENTION
Bearer number for the line to bond.
current
PdnDslAtmBondGroupDataRateTC
TEXTUAL-CONVENTION
A data rate, in bits/s, for a bonding group. The value, -1 represents infinity, and indicates that the parameter is to be ignored.
current
PdnDslAtmBondGroupDiffDelayTolTC
TEXTUAL-CONVENTION
The maximum differential delay tolerance, in milliseconds, among member links in a bonding group.
current
PdnDslAtmBondGroupFailReasonTC
TEXTUAL-CONVENTION
The reason the operational status for a bonding group is not `operational'.
current
PdnDslAtmBondGroupIdentityTC
TEXTUAL-CONVENTION
An identifier to uniquely identify a bonding group.
current
PdnDslAtmBondGroupIndexTC
TEXTUAL-CONVENTION
An identifier for a bonding group table entry. This syntax was chosen to correspond to the TestAndIncr TC for pdnDslAtmBondNextGroupIndex.
current
PdnDslAtmBondGroupStatusTC
TEXTUAL-CONVENTION
The status of a group. A group is considered `unavailable' when it does not satisfy the parameters provisioned for the group.
current
PdnDslAtmBondLinkStatusAsmTC
TEXTUAL-CONVENTION
The status of a link within a bonding group relative to its capability or current state with respect to the transportation of bonded traffic. +------------------------------------------------------+ | | | Rx Link Status | | 1. Not provisioned. | | The link is indicated as not provisioned, and | | will never be part of a bonded group. | | 2. Should not be used. | | The transmitter should not use this link for | | bonding, but this link is provisioned as a | | candidate link member (i.e. a temporary | | outage). | | 3. Acceptable to carry bonded traffic. | | This status is used to request that the | | transmitter consider this provisioned link | | for bonding. | | 4. Selected to carry bonded traffic. | | Bonded traffic is expected on this link. | | | +------------------------------------------------------+ | | | Tx Link Status | | 1. Not provisioned. | | The link is indicated as not provisioned, and | | will never be part of a bonded group. | | 2. Should not be used. | | The receiver should not consider this link | | for bonding, but this link is provisioned as | | a candidate link member. | | 3. Acceptable to carry bonded traffic. | | This status is used to indicate that the | | receiver should consider it for carrying | | bonded traffic. | | 4. Selected to carry bonded traffic. | | The transmitter is using or will use this | | link to carry bonded traffic. | | | +------------------------------------------------------+
current

Objects

NameOIDSyntaxAccessStatus
pdnDslAtmBondNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.6.33.0
pdnDslAtmBondObjects
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.6.33.1
pdnDslAtmBondNextGroupIndex
OBJECT-TYPE
This object is used to establish the next unused group index (pdnDslAtmBondGroupIndex). This object is used to assist the manager in selecting a value for pdnDslAtmBondGroupIndex. Because this object is of syntax TestAndIncr (see the SNMPv2-TC document, RFC 2579) it can also be used to avoid race conditions with multiple managers trying to create rows in the table. If the result of the SET for pdnDslAtmBondNextGroupIndex is not success, this means the value has been changed from index (i.e. another manager used the value), so a new value is required. The algorithm is: done = false while done == false index = GET (pdnDslAtmBondNextGroupIndex.0) SET (pdnDslAtmBondNextGroupIndex.0=index) if (set failed) done = false else SET(pdnDslAtmBondGroupRowStatus.index=createAndGo) if (set failed) done = false else done = true other error handling This description was modeled from RFC2494, DS0BUNDLE-MIB.
1.3.6.1.4.1.1795.2.24.2.6.33.1.1TestAndIncrread-writecurrent
pdnDslAtmBondNbrOfGroups
OBJECT-TYPE
The number of bonding groups configured on this system.
1.3.6.1.4.1.1795.2.24.2.6.33.1.2Unsigned32 (0..2147483647)read-onlycurrent
pdnDslAtmBondGroupTable
OBJECT-TYPE
The DSL ATM Bond Group Table. Contains configuration and operational information relative to a particular bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.1.3not-accessiblecurrent
pdnDslAtmBondGroupEntry
OBJECT-TYPE
An entry in the DSL ATM Bond Group Table. Each entry represents a particular bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1not-accessiblecurrent
pdnDslAtmBondGroupIndex
OBJECT-TYPE
A unique identifier for a bonding group. This is not the same value as an ifIndex for the group. The pdnDslAtmBondGroupIfIndex object contains the bonding group's ifIndex.
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.1PdnDslAtmBondGroupIndexTCnot-accessiblecurrent
pdnDslAtmBondGroupRowStatus
OBJECT-TYPE
This object allows create, change, and delete operations on the table. The delete operation can only occur when the pdnDslAtmBondGroupNbrRefs is 0 meaning that there are no DSL interfaces and bearers that are bonded to this group.
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.2RowStatusread-createcurrent
pdnDslAtmBondGroupNbrRefs
OBJECT-TYPE
The number of DSL interface / bearer combinations that are members of this group. This is the number of entries in the pdnDslAtmBondMappingTable that have their pdnDslAtmBondMappingGroupIndex assigned to this value of pdnDslAtmBondGroupIndex.
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.3Unsigned32 (0..2147483647)read-onlycurrent
pdnDslAtmBondGroupIfIndex
OBJECT-TYPE
Identifies the interface number assigned to this bonding group and is used to identify corresponding rows in the interfaces MIB.
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.4InterfaceIndexread-onlycurrent
pdnDslAtmBondGroupID
OBJECT-TYPE
An identifier to uniquely identify the bonding group. This ID one of the fields of the Autonomous Status Message and may be useful in some debugging situations.
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.5PdnDslAtmBondGroupIdentityTCread-createcurrent
pdnDslAtmBondGroupAlarmConfProfileName
OBJECT-TYPE
Identifies the Alarm Profile this group is associated with which is an entry in the pdnDslAtmBondAlarmConfProfileTable. If this object is not a zero-length string, it should default to the default profile whose name is `DEFVAL'.
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.6SnmpAdminString (SIZE(0 | 1..32))read-createcurrent
pdnDslAtmBondGroupAtucMaxNetDataRate
OBJECT-TYPE
The maximum net data rate this bonding group is allowed to achieve in the downstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.7PdnDslAtmBondGroupDataRateTCread-createcurrent
pdnDslAtmBondGroupAturMaxNetDataRate
OBJECT-TYPE
The maximum net data rate this bonding group is allowed to achieve in the upstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.8PdnDslAtmBondGroupDataRateTCread-createcurrent
pdnDslAtmBondGroupAtucMinNetDataRate
OBJECT-TYPE
The minimum net data rate this bonding group is allowed to achieve in the downstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.9PdnDslAtmBondGroupDataRateTCread-createcurrent
pdnDslAtmBondGroupAturMinNetDataRate
OBJECT-TYPE
The minimum net data rate this bonding group is allowed to achieve in the upstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.10PdnDslAtmBondGroupDataRateTCread-createcurrent
pdnDslAtmBondGroupAtucDiffDelay
OBJECT-TYPE
The maximum differential delay tolerance among member links in this bonding group in the downstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.11PdnDslAtmBondGroupDiffDelayTolTCread-createcurrent
pdnDslAtmBondGroupAturDiffDelay
OBJECT-TYPE
The maximum differential delay tolerance among member links in this bonding group in the upstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.12PdnDslAtmBondGroupDiffDelayTolTCread-createcurrent
pdnDslAtmBondGroupStatusNotifyEnabled
OBJECT-TYPE
Specifies whether or not the pdnDslAtmBondGroupStatusChange notification will be generated. When set to true(1), the notification will be generated when the pdnDslAtmBondPerfGroupStatus changes. When set to false(2), the notification will not be generated with the pdnDslAtmBondPerfGroupStatus changes.
1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.13TruthValueread-createcurrent
pdnDslAtmBondMappingTable
OBJECT-TYPE
The DSL ATM Bond Mapping Table. This table is used to map a DSL port and a bearer number to a bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.1.4not-accessiblecurrent
pdnDslAtmBondMappingEntry
OBJECT-TYPE
An entry in the DSL ATM Bond Mapping Table. Each entry represents a DSL interface and a a bearer number.
1.3.6.1.4.1.1795.2.24.2.6.33.1.4.1not-accessiblecurrent
pdnDslAtmBondDslIfIndex
OBJECT-TYPE
Identifies the DSL interface of a link that is to be bonded to the group.
1.3.6.1.4.1.1795.2.24.2.6.33.1.4.1.1InterfaceIndexnot-accessiblecurrent
pdnDslAtmBondBearerNbr
OBJECT-TYPE
Identifies the bearer number of a link for the DSL line to be bonded to the group.
1.3.6.1.4.1.1795.2.24.2.6.33.1.4.1.2PdnDslAtmBondGroupBearerNumberTCnot-accessiblecurrent
pdnDslAtmBondMappingRowStatus
OBJECT-TYPE
This object allows create, change, and delete operations on the table.
1.3.6.1.4.1.1795.2.24.2.6.33.1.4.1.3RowStatusread-createcurrent
pdnDslAtmBondMappingGroupIndex
OBJECT-TYPE
The pdnDslAtmBondGroupIndex which identifies the group to which the DSL line and bearer number, which form a link, are to be bound to.
1.3.6.1.4.1.1795.2.24.2.6.33.1.4.1.4PdnDslAtmBondGroupIndexTCread-createcurrent
pdnDslAtmBondGroupIndexMappingTable
OBJECT-TYPE
The DSL ATM Bond Group Index Mapping Table. This table identifies the mapping from the bonding group's ifIndex to the bonding group's index.
1.3.6.1.4.1.1795.2.24.2.6.33.1.5not-accessiblecurrent
pdnDslAtmBondGroupIndexMappingEntry
OBJECT-TYPE
An entry in the DSL ATM Bond Group Index Mapping Table. Each entry represents an ifIndex for a bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.1.5.1not-accessiblecurrent
pdnDslAtmBondGroupIndexMappingIndex
OBJECT-TYPE
The pdnDslAtmBondGroupIndex this group ifIndex entry maps to.
1.3.6.1.4.1.1795.2.24.2.6.33.1.5.1.1PdnDslAtmBondGroupIndexTCread-onlycurrent
pdnDslAtmBondGroupInvMappingTable
OBJECT-TYPE
The DSL ATM Bond Group Inverse Mapping Table. This table identifies the mapping from a bonding group's index and a DSL interface to a bearer. This object provides a a mechanism to list bonding groups from a group's index.
1.3.6.1.4.1.1795.2.24.2.6.33.1.6not-accessiblecurrent
pdnDslAtmBondGroupInvMappingEntry
OBJECT-TYPE
An entry in the DSL ATM Bond Inverse Mapping Table. Each entry represents a particular bonding group and a particular DSL interface.
1.3.6.1.4.1.1795.2.24.2.6.33.1.6.1not-accessiblecurrent
pdnDslAtmBondInvMappingBearerNbr
OBJECT-TYPE
The bearer on a particular DSL interface that is a member of the bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.1.6.1.1PdnDslAtmBondGroupBearerNumberTCread-onlycurrent
pdnDslAtmBondPerfTable
OBJECT-TYPE
The DSL ATM Bond Current Table. This table contains the status and performance information for bonding groups.
1.3.6.1.4.1.1795.2.24.2.6.33.1.7not-accessiblecurrent
pdnDslAtmBondPerfEntry
OBJECT-TYPE
An entry in the DSL ATM Bond Performance Table. Each entry represents a particular bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1not-accessiblecurrent
pdnDslAtmBondPerfCurrAtucNetDataRate
OBJECT-TYPE
The current net data rate the bonding group has achieved for the downstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.1PdnDslAtmBondGroupDataRateTCread-onlycurrent
pdnDslAtmBondPerfCurrAturNetDataRate
OBJECT-TYPE
The current net data rate the bonding group has achieved for the upstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.2PdnDslAtmBondGroupDataRateTCread-onlycurrent
pdnDslAtmBondPerfPrevAtucNetDataRate
OBJECT-TYPE
The previous net data rate the bonding group had achieved for the downstream direction. This value is set at initialization to prevent a notification from being sent.
1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.3PdnDslAtmBondGroupDataRateTCread-onlycurrent
pdnDslAtmBondPerfPrevAturNetDataRate
OBJECT-TYPE
The previous net data rate the bonding group had achieved for the upstream direction. This value is set at initialization to prevent a notification from being sent.
1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.4PdnDslAtmBondGroupDataRateTCread-onlycurrent
pdnDslAtmBondPerfGroupStatus
OBJECT-TYPE
The status of the bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.5PdnDslAtmBondGroupStatusTCread-onlycurrent
pdnDslAtmBondPerfFailReason
OBJECT-TYPE
The reason the operational status of the bonding group is not `operational'.
1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.6PdnDslAtmBondGroupFailReasonTCread-onlycurrent
pdnDslAtmBondPerfFailCount
OBJECT-TYPE
A count of the number of times the group was declared `unavailable` since last restart.
1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.7Counter32read-onlycurrent
pdnDslAtmBondPerfRunTime
OBJECT-TYPE
The total accumulated time the bonding group was in the `normal' operational status since last restart.
1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.8Counter32read-onlycurrent
pdnDslAtmBondPerfUAS
OBJECT-TYPE
The total accumulated time the bonding group was unavailable since last restart.
1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.9Counter32read-onlycurrent
pdnDslAtmBondPerfAtucRxCellLoss
OBJECT-TYPE
The total number of cells that are lost at the aggregation output in the upstream direction from the bonding group since last restart.
1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.10Counter32read-onlycurrent
pdnDslAtmBondPerfAturRxCellLoss
OBJECT-TYPE
The total number of cells that are lost at the aggregation output in the downstream direction from a bonding group since last restart.
1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.11Counter32read-onlycurrent
pdnDslAtmBond15MinIntervalTable
OBJECT-TYPE
The DSL ATM Bond 15-Minute Interval Table. This table contains the status and performance information for bonding groups collected in 15-minute intervals.
1.3.6.1.4.1.1795.2.24.2.6.33.1.8not-accessiblecurrent
pdnDslAtmBond15MinIntervalEntry
OBJECT-TYPE
An entry in the DSL ATM Bond 15-Minute Interval Table. Each entry represents a particular bonding group and a particular 15-minute interval.
1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1not-accessiblecurrent
pdnDslAtmBond15MinIntervalNumber
OBJECT-TYPE
Performance Data Interval number. Interval 1 is the most recent previous 15-minute interval; interval 96 is 24 hours ago. Intervals 2..96 are optional.
1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.1Unsigned32 (1..96)not-accessiblecurrent
pdnDslAtmBond15MinIntervalStartDateAndTime
OBJECT-TYPE
Provides a date-time indication of when the interval started.
1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.2DateAndTimeread-onlycurrent
pdnDslAtmBond15MinIntervalFailCount
OBJECT-TYPE
A count of the number of times the group was declared `unavailable` during the interval.
1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.3Counter32read-onlycurrent
pdnDslAtmBond15MinIntervalRunTime
OBJECT-TYPE
The accumulated time the bonding group was in the `normal' operational status during the interval.
1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.4Counter32read-onlycurrent
pdnDslAtmBond15MinIntervalUAS
OBJECT-TYPE
The accumulated time the bonding group was unavailable during the interval,
1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.5Counter32read-onlycurrent
pdnDslAtmBond15MinIntervalAtucRxCellLoss
OBJECT-TYPE
The number of cells that are lost at the aggregation output in the upstream direction from the bonding group during the interval.
1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.6Counter32read-onlycurrent
pdnDslAtmBond15MinIntervalAturRxCellLoss
OBJECT-TYPE
The number of cells that are lost at the aggregation output in the downstream direction from the bonding group during the interval.
1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.7Counter32read-onlycurrent
pdnDslAtmBond1DayIntervalTable
OBJECT-TYPE
The DSL ATM Bond 1-Day Interval Table. This table contains the status and performance information for bonding groups collected in 1-Day intervals.
1.3.6.1.4.1.1795.2.24.2.6.33.1.9not-accessiblecurrent
pdnDslAtmBond1DayIntervalEntry
OBJECT-TYPE
An entry in the DSL ATM Bond 1-Day Interval Table. Each entry represents a particular bonding group and a particular 1-day interval.
1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1not-accessiblecurrent
pdnDslAtmBond1DayIntervalNumber
OBJECT-TYPE
Performance Data Interval number. Interval 1 is the most recent previous 1-day interval; interval 30 is 30 days ago. Intervals 2..30 are optional.
1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.1Unsigned32 (1..30)not-accessiblecurrent
pdnDslAtmBond1DayIntervalStartDateAndTime
OBJECT-TYPE
Provides a date-time indication of when the interval started.
1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.2DateAndTimeread-onlycurrent
pdnDslAtmBond1DayIntervalFailCount
OBJECT-TYPE
A count of the number of times the group was declared `unavailable` during the interval.
1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.3Counter32read-onlycurrent
pdnDslAtmBond1DayIntervalRunTime
OBJECT-TYPE
The accumulated time the bonding group was in the `normal' operational status during the interval.
1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.4Counter32read-onlycurrent
pdnDslAtmBond1DayIntervalUAS
OBJECT-TYPE
The accumulated time the bonding group was unavailable during the interval,
1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.5Counter32read-onlycurrent
pdnDslAtmBond1DayIntervalAtucRxCellLoss
OBJECT-TYPE
The number of cells that are lost at the aggregation output in the upstream direction from a bonding group during the interval.
1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.6Counter32read-onlycurrent
pdnDslAtmBond1DayIntervalAturRxCellLoss
OBJECT-TYPE
The number of cells that are lost at the aggregation output in the downstream direction from the bonding group during the interval.
1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.7Counter32read-onlycurrent
pdnDslAtmBondLinkTable
OBJECT-TYPE
The DSL ATM Bond Link Table. This table contains the current status information for a link in a bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.1.10not-accessiblecurrent
pdnDslAtmBondLinkEntry
OBJECT-TYPE
An entry in the DSL ATM Bond Link Table. each entry represents a DSL interface on a particular bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1not-accessiblecurrent
pdnDslAtmBondLinkAtucRxLinkStatus
OBJECT-TYPE
The status of the Rx link in a bonded group in the upstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.1PdnDslAtmBondLinkStatusAsmTCread-onlycurrent
pdnDslAtmBondLinkAturRxLinkStatus
OBJECT-TYPE
The status of the Rx link in a bonded group in the downstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.2PdnDslAtmBondLinkStatusAsmTCread-onlycurrent
pdnDslAtmBondLinkAtucTxLinkStatus
OBJECT-TYPE
The status of the Tx link in a bonded group in the downstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.3PdnDslAtmBondLinkStatusAsmTCread-onlycurrent
pdnDslAtmBondLinkAturTxLinkStatus
OBJECT-TYPE
The status of the Rx link in a bonded group in the upstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.4PdnDslAtmBondLinkStatusAsmTCread-onlycurrent
pdnDslAtmBondLinkAtucAsmRxStatus
OBJECT-TYPE
The status of ASMs received for the link in a bonded in the upstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.5PdnDslAtmBondAsmRxStatusTCread-onlycurrent
pdnDslAtmBondLinkAturAsmRxStatus
OBJECT-TYPE
The status of ASMs received for the link in a bonded in the downstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.6PdnDslAtmBondAsmRxStatusTCread-onlycurrent
pdnDslAtmBondAlarmConfProfileTable
OBJECT-TYPE
The DSL ATM Bond Alarm Configuration Profile Table. This table contains the alarm configuration profiles for DSL ATM Bonding.
1.3.6.1.4.1.1795.2.24.2.6.33.1.11not-accessiblecurrent
pdnDslAtmBondAlarmConfProfileEntry
OBJECT-TYPE
An entry in the DSL ATM Bond Alarm Configuration Profile Table. Each entry represents a single alarm configuration profile. Profiles may be created/deleted using the RowStatus mechanism not including the default profile. A default profile with an index of `DEFVAL' will always exist and its parameters will be set to implementation-specific values.
1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1not-accessiblecurrent
pdnDslAtmBondAlarmConfProfileName
OBJECT-TYPE
This object is the index for the table and identifies a unique row in the table. A default profile with an index of `DEFVAL' will always exist and its parameters will be set to implementation-specific values.
1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.1SnmpAdminString (SIZE(1..32))not-accessiblecurrent
pdnDslAtmBondAlarmConfRowStatus
OBJECT-TYPE
This object allows profiles to be created to deleted. The delete operation can only occur when the pdnDslAtmBondAlarmConfNbrRefs is 0 meaning that there are no entries in the pdnDslAtmBondGroupTable that reference this group.
1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.2RowStatusread-createcurrent
pdnDslAtmBondAlarmConfNbrRefs
OBJECT-TYPE
The number of entries in the pdnDslAtmBondGroupTable that reference this profile.
1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.3Unsigned32 (0..2147483647)read-onlycurrent
pdnDslAtmBondAlarmConfAtucThreshRateUp
OBJECT-TYPE
Configured change in rate, in bps, causing a pdnDslAtmBondAtucRateChange notification. The notification is produced when current rate >= previous rate plus the value of this object. A value of `0' will disable the trap.
1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.4Integer32 (0..2147483647)read-createcurrent
pdnDslAtmBondAlarmConfAturThreshRateUp
OBJECT-TYPE
Configured change in rate, in bps, causing a pdnDslAtmBondAturRateChange notification. The notification is produced when current rate >= previous rate plus the value of this object. A value of `0' will disable the trap.
1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.5Integer32 (0..2147483647)read-createcurrent
pdnDslAtmBondAlarmConfAtucThreshRateDown
OBJECT-TYPE
Configured change in rate, in bps, causing a pdnDslAtmBondAtucRateChange notification. The notification is produced when current rate <= previous rate minus the value of this object. A value of `0' will disable the trap.
1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.6Integer32 (0..2147483647)read-createcurrent
pdnDslAtmBondAlarmConfAturThreshRateDown
OBJECT-TYPE
Configured change in rate, in bps, causing a pdnDslAtmBondAturRateChange notification. The notification is produced when current rate <= previous rate minus the value of this object. A value of `0' will disable the trap.
1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.7Integer32 (0..2147483647)read-createcurrent
pdnDslAtmBondAFNs
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.6.33.2
pdnDslAtmBondConformance
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.6.33.3
pdnDslAtmBondCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.6.33.3.1
pdnDslAtmBondGroups
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.6.33.3.2
pdnDslAtmBondObjGroups
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1
pdnDslAtmBondAfnGroups
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.2
pdnDslAtmBondNtfyGroups
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.3

Notifications

NameOIDStatus
pdnDslAtmBondAtucRateChange
NOTIFICATION-TYPE
The downstream transmit rate has changed.
1.3.6.1.4.1.1795.2.24.2.6.33.0.1current
pdnDslAtmBondAturRateChange
NOTIFICATION-TYPE
The upstream transmit rate has changed.
1.3.6.1.4.1.1795.2.24.2.6.33.0.2current
pdnDslAtmBondGroupStatusChange
NOTIFICATION-TYPE
The operational status of the group has changed.
1.3.6.1.4.1.1795.2.24.2.6.33.0.3current

Conformance

NameOIDStatus
pdnDslAtmBondMIBCompliance
MODULE-COMPLIANCE
The compliance statement for the entities which implement the pdnDslAtmBondMIB.
1.3.6.1.4.1.1795.2.24.2.6.33.3.1.1current
pdnDslAtmBondGroup
OBJECT-GROUP
General configuration/definition of a bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.1current
pdnDslAtmBondMaxRateGroup
OBJECT-GROUP
Configuration of the maximum net data rate a bonding group is allowed to achieve.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.2current
pdnDslAtmBondMinRateGroup
OBJECT-GROUP
Configuration of the minimum net data rate a bonding group is allowed to achieve.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.3current
pdnDslAtmBondDiffDelayGroup
OBJECT-GROUP
Configuration of maximum differential delay among member links in a bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.4current
pdnDslAtmBondGroupStatusNotifyEnabledGroup
OBJECT-GROUP
Configuration of notifications for changes to the status of a bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.5current
pdnDslAtmBondMappingGroup
OBJECT-GROUP
Map a DSL interface and a bearer to a bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.6current
pdnDslAtmBondIndexMappingGroup
OBJECT-GROUP
Map from a bonding group's ifIndex to the bonding group's index.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.7current
pdnDslAtmBondInvMappingGroup
OBJECT-GROUP
Map from a bonding group and a DSL interface to a bearer.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.8current
pdnDslAtmBondPerfAggDataRateGroup
OBJECT-GROUP
Status of the net data rate the bonding group has currently or had previously achieved.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.9current
pdnDslAtmBondPerfBondGroupStatusGroup
OBJECT-GROUP
Current status of the bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.10current
pdnDslAtmBondDateAndTimeGroup
OBJECT-GROUP
Date-time stamp of when an interval started.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.11current
pdnDslAtmBondRunTimeGroup
OBJECT-GROUP
The tracking of time a bonding group is `operational'.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.12current
pdnDslAtmBondRxCellLossGroup
OBJECT-GROUP
The tracking the total number of cells that are lost at the aggregation output from a bonding group.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.13current
pdnDslAtmBondPerfFailReasonGroup
OBJECT-GROUP
The reason the operational status of the bonding group is not `operational'.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.14current
pdnDslAtmBondFailCountGroup
OBJECT-GROUP
The number of times a bonding group was declared `unavailable'.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.15current
pdnDslAtmBondUASGroup
OBJECT-GROUP
The time a bonding group was unavailable.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.16current
pdnDslAtmBondTrafficCapGroup
OBJECT-GROUP
Current status of the link in a bonded group with respect to carrying bonded traffic.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.17current
pdnDslATmBondAsmRxStatusGroup
OBJECT-GROUP
Status of the reception of ASMs for a link in a bonded group.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.18current
pdnDslAtmBondAlarmConfProfileGroup
OBJECT-GROUP
Provides the ability to create or delete alarm profiles.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.19current
pdnDslAtmBondAlarmConfAtucThreshRateGroup
OBJECT-GROUP
Provides the ability to configure thresholds for rate changes in the downstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.20current
pdnDslAtmBondAlarmConfAturThreshRateGroup
OBJECT-GROUP
Provides the ability to configure thresholds for rate changes in the upstream direction.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.21current
pdnDslAtmBondNotificationsGroup
NOTIFICATION-GROUP
The collection of notifications for the MIB module.
1.3.6.1.4.1.1795.2.24.2.6.33.3.2.3.1current