MIBs Depot

PDN-CP-IWF-MIB

Registered at
1.3.6.1.4.1.1795.2.24.2.50.1
Last updated
2004-12-02 17:00
Organization
Paradyne Networks MIB Working Group Other information about group editing the MIB
Revisions
2004-12-02 17:00, 2004-10-07 11:00, 2004-08-30 11:00, 2004-07-15 00:00, 2004-03-22 00:00
Namespace
zhone
Source file
PDN-CP-IWF-MIB
Digest
sha256:7d660cba4908d7c7f55365d8ea1432bdba5f32f0f6d99f7c44eecab5aa84f071

Description

This module defines a portion of the management information base (MIB) for managing multiple Loop Emulation Service (LES) Customer Premises Interworking Functions (CP-IWF). The mib recommended by the ATM forum (af-vmoa-0145.000) lacks the ability to manage multiple CP-IWFs as required by the Paradyne DSLAM products. This enterprise mib is meant to be used in connection with RFC 2863 which defines the ifTable.

Contact

Paradyne Networks, Inc. 8545 126th Avenue North Largo, FL 33773 www.paradyne.com General Comments to: mibwg_team@paradyne.com Editor Jesus Pinto

Imports

FromSymbols
IF-MIBInterfaceIndex, ifIndex
PDN-HEADER-MIBpdnCpIwf
PDN-TCSwitchState
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
PDN-CP-IWF-MIB
PDN-HEADER-MIB
PDN-TC
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
ControlProtocol
TEXTUAL-CONVENTION
This textual convention defines the control protocol capabilities of the CpIwf. Each bit position in the bitmap corresponds to an specific protocol. If the bit is 1, that protocol is supported. Bit 0 : cas (channel associated signaling) Bit 1 : eoc (embedded operation channel) Bit 2 : ccs/elcp (common signaling channel/ emulated loop control protocol) Bit 3 : Not used (Future) Bit 4 : Not used (Future) Bit 5 : Not used (Future) Bit 6 : Not used (Future) Bit 7 : Not used (Future)
current
CpIwfRegion
TEXTUAL-CONVENTION
Different regions define an specific group of parameters
current
GatewayProtocol
TEXTUAL-CONVENTION
Gateway protocols supported by CPIWF running on this agent
current
HookState
TEXTUAL-CONVENTION
This textual convention defines the different hook status for POTS ports.
current
PdnPotsTestTypes
TEXTUAL-CONVENTION
This textual convention defines the possible test types for POTS ports.
current
PotsSignaling
TEXTUAL-CONVENTION
This textual convention defines the possible signaling types for POTS ports.
current
VoiceEncoding
TEXTUAL-CONVENTION
This textual convention defines the voice encoding capabilities of the POTS port.
current

Objects

NameOIDSyntaxAccessStatus
pdnCpIwfNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.50.1.0
pdnCpIwfMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.50.1.1
pdnCpIwfConfigObjects
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.50.1.1.1
pdnCpIwfTotalNumber
OBJECT-TYPE
Indicates the total number of CpIwfs correctly configured in this system.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.1Integer32 (1..2147483647)read-onlycurrent
pdnCpIwfIndexNext
OBJECT-TYPE
This object contains an appropriate value to be used for pdnCpIwfIndex when creating entries in the pdnCpIwfTable. The value 0 indicates that no unassigned entries are available. To obtain the pdnCpIwfIndexNext value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.2Integer32 (0..2147483647)read-onlycurrent
pdnCpIwfRegion
OBJECT-TYPE
This object permits the selection of a regional set of parameters that apply to the entire device.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.3CpIwfRegionread-writecurrent
pdnCpIwfTable
OBJECT-TYPE
The Cp-Iwf Configuration table.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.4not-accessiblecurrent
pdnCpIwfEntry
OBJECT-TYPE
An entry in the Cp-Iwf configuration table.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.4.1not-accessiblecurrent
pdnCpIwfIndex
OBJECT-TYPE
This object is an arbitrary index assigned by the agent. When a client wishes to add an entry to this pdnCpIwfTable, first it must do a get to the pdnCpIwfIndexNext and use the returned value as the table's index for the new entry.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.4.1.1Integer32 (1..2147483647)not-accessiblecurrent
pdnCpIwfIfIndex
OBJECT-TYPE
This object displays the interface index from the ifTable assigned by the SNMP agent upon creation of this CPIWF.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.4.1.2InterfaceIndexread-onlycurrent
pdnCpIwfRowStatus
OBJECT-TYPE
rowStatus object that allows creation and deletion of CpIwfs.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.4.1.3RowStatusread-createcurrent
pdnCpIwfNumPotsAssigned
OBJECT-TYPE
This object maintains the number of pots ports currently assigned to this CpIwf. It is not required that a new created CpIwf has Pots ports assigned to it. Moreover, the default value for this object can be implementation specific, for example: - assign all 24 POTS ports to the CpIwf port upon creation. - assign a minimum number of POTS to the CpIwf port.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.4.1.4Integer32 (0..24)read-onlycurrent
pdnCpIwfGatewayProtocol
OBJECT-TYPE
This is the Gateway protocol configured for this CPIWF.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.4.1.5GatewayProtocolread-createcurrent
pdnCpIwfAtmBLESCapability
OBJECT-TYPE
This object indicates whether this CP-IWF supports the ATM Forum BLES standard with CCS and ELCP and EOC.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.4.1.6ControlProtocolread-onlycurrent
pdnCpIwfSscsPredefinedProfile
OBJECT-TYPE
This object allows selection of predefined profiles for use by voice/voiceband data connections using UUI codepoints 0-15 with type 1 packets. The ATM Forum predefined profiles are specified in Annex A: ATM Forum Predefined Profiles (see reference below). Implementations are not required to support every profile. Thus, an SNMP set on this object to an unsupported profile must result in an SNMP Response with error status of badValue(3). Examples of profiles and its attributes values: <<Profile 9>> (PCM-64, 44 Octet packets, without silence): ------------------------------------------------------------------------------- UUI | Packet | Encoding | Description | | Packet | Seq.No Codepoint | Length | Format | of | M | Time | Interval Range | (octets) | Reference | Algorithm | | (ms) | (ms) ------------------------------------------------------------------------------- 0-15 44 Fig B-1/I.366.2 PCM, G.711-64, 1 5.5 5.5 Generic <<Profile 10>> (PCM-64 and ADPCM-32, 44 Octet packets, without silence): ------------------------------------------------------------------------------- UUI | Packet | Encoding | Description | | Packet | Seq.No Codepoint | Length | Format | of | M | Time | Interval Range | (octets) | Reference | Algorithm | | (ms) | (ms) ------------------------------------------------------------------------------- 0-7 44 Fig B-1/I.366.2 PCM, G.711-64, 1 5.5 5.5 Generic 7-15 44 Fig E-2/I.366.2 ADPCM, G.726-32 1 5.5 5.5
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.4.1.7Integer32read-writecurrent
pdnCpIwfJitterBufferLength
OBJECT-TYPE
This object allows the configuration of the jitter buffer length.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.4.1.8Integer32 (10..120)read-writecurrent
pdnCpIwfMappingTable
OBJECT-TYPE
A table mapping the 'ifIndex' values of 'pdnCpIwfIfIndex' to the 'pdnCpIwfIndex' values of the corresponding CpIwf.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.5not-accessiblecurrent
pdnCpIwfMappingEntry
OBJECT-TYPE
Each row describes the mapping of one ifIndex to a pdnCpIwfIndex.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.5.1not-accessiblecurrent
pdnCpIwfMappingIndex
OBJECT-TYPE
The index assigned to the Cp-Iwf's interface upon creation.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.5.1.1Integer32 (1..2147483647)read-onlycurrent
pdnPotsPortTable
OBJECT-TYPE
The Pots port Configuration table.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6not-accessiblecurrent
pdnPotsPortEntry
OBJECT-TYPE
An entry in the Pots Port configuration table.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1not-accessiblecurrent
pdnPotsPortIfIndex
OBJECT-TYPE
ifIndex value from ifTable for this POTS port.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.1InterfaceIndexnot-accessiblecurrent
pdnPotsPortCpIwfIndex
OBJECT-TYPE
The value of this object corresponds to a valid pdnCpIwfIndex in the pdnCpIwfTable or '0' which has the meaning of 'not-assigned'. The value 0 is expected to be used during changes on the assignment of Pots ports, that is, a Pots port initially assigned to a CpIwf port needs to be un-assigned first and then assigned to the new CpIwf Port.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.2Integer32 (0..2147483647)read-writecurrent
pdnPotsPortHookStatus
OBJECT-TYPE
Current hook status of this POTS port.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.3HookStateread-onlycurrent
pdnPotsPortSignalingMethod
OBJECT-TYPE
Signaling method selected for this POTS port.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.4PotsSignalingread-writecurrent
pdnPotsPortTxGain
OBJECT-TYPE
This is the gain in the analog-to-digital direction (towards the uplink).
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.5Integer32 (-24..23)read-writecurrent
pdnPotsPortRxGain
OBJECT-TYPE
This is the gain in the digital-to-analog direction (towards the loop).
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.6Integer32 (-24..23)read-writecurrent
pdnPotsPortCustInfo
OBJECT-TYPE
This object represents textual information about an user, typically user name and directory number.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.7DisplayStringread-writecurrent
pdnPotsPortG729VoiceCodec
OBJECT-TYPE
This object is used to enable or disable G.729 codec on this POTS port.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.8SwitchStateread-writecurrent
pdnPotsPortPreferedVoiceCodec
OBJECT-TYPE
This object is the preferable voice encoding configured for this port.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.9VoiceEncodingread-writecurrent
pdnPotsPortPreferredPacketPeriod
OBJECT-TYPE
The value of this object contains the preferred packetization period in milliseconds.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.10Integer32 (0..2147483647)read-writecurrent
pdnPotsPortSilenceSuppression
OBJECT-TYPE
This object allows users to enable or disable silence suppression. If the value of the object is 'enabled (1)' silence suppression will be performed for a call placed on this port if agreed via negotiation with the far end.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.11SwitchStateread-writecurrent
pdnPotsPortActualVoiceCodec
OBJECT-TYPE
This object is the actual voice encoding being used on this port as determined by the device in real-time. This object may differ from the configurable 'pdnPotsPortPreferedVoiceCodec' object.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.12VoiceEncodingread-onlycurrent
pdnPotsPortCallElapsedTime
OBJECT-TYPE
This value is the number of seconds that have elapsed since the start of the current call. If no active call is in progress on this port, this object should be zero.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.13Integer32 (0..65535)read-onlycurrent
pdnPotsPortModemDetected
OBJECT-TYPE
This object displays the status of the modem/fax connected on this port. If the value of this object is 'enabled (1)' the modem or fax answer tone has been detected. Otherwise this object will return 'disabled (2)'.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.14TruthValueread-onlycurrent
pdnPotsPortEchoCanceller
OBJECT-TYPE
This object displays the current status of the echo canceller.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.15INTEGER {enabled(1), disabled(2)}read-onlycurrent
pdnPotsPortLocalEndName
OBJECT-TYPE
This object contains a descriptive text identifying the local endpoint's name.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.16DisplayString (SIZE(0..64))read-writecurrent
pdnPotsPortActiveSoftswitch
OBJECT-TYPE
This object displays the active selection for the Softswitch (e.g., Call Agent, Proxy Agent, etc.) for this Pots port. The possible values for this object are: primary --> Primary Softswitch is selected secondary --> Secondary Softswitch is selected none --> no softswitch is currently selected. The configuration of the primary/secondary softswitches are found in objects outside this document (e.g., pdnCpIwfIpMgcpPriAgentName, etc...) If the SNMP agent can not determine an active softswitch for this Pots port (e.g, lost communication with the Call Agent), the value of this object will be set to 'none (3)'.
1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.17INTEGER {primary(1), secondary(2), none(3)}read-onlycurrent
pdnCpIwfTestObjects
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.50.1.1.2
pdnPotsTestTable
OBJECT-TYPE
The Paradyne Pots Port Interface Test Table.
1.3.6.1.4.1.1795.2.24.2.50.1.1.2.1not-accessiblecurrent
pdnPotsTestEntry
OBJECT-TYPE
An entry in the Paradyne POTS Interface Test Table. Only 1 test can be run at a time per POTS interface index (ifIndex).
1.3.6.1.4.1.1795.2.24.2.50.1.1.2.1.1not-accessiblecurrent
pdnPotsTestType
OBJECT-TYPE
This object is used to specify the test type in this interface. If no test is active on this port, the agent should return the value of 'noTest (1)'
1.3.6.1.4.1.1795.2.24.2.50.1.1.2.1.1.1PdnPotsTestTypesread-writecurrent
pdnPotsTestCmd
OBJECT-TYPE
This object can be set to initiate and/or terminate the test running on this interface. If no test is 'active' on this interface, the agent should return the value of 'noOp(1)'. Only if a test is 'active' on this interface, the agent should process a 'keepAlive (4)' command. Otherwise, this command should be rejected.
1.3.6.1.4.1.1795.2.24.2.50.1.1.2.1.1.2INTEGER {noOp(1), start(2), stop(3), keepAlive(4)}read-writecurrent
pdnPotsTestStatus
OBJECT-TYPE
This object displays the current status of this entry. If no test is running on this interface, the agent should return the value 'inactive (2)'.
1.3.6.1.4.1.1795.2.24.2.50.1.1.2.1.1.3INTEGER {active(1), inactive(2)}read-onlycurrent
pdnCpIwfStatsObjects
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.50.1.1.3
pdnCpIwfAal2StatsTable
OBJECT-TYPE
This table is used to maintain AAL2-Customer Part Sublayer (CPS) statistics per VCC associated to each CpIwf port. An entry in this table represents the AAL2 statistics maintained for this circuit.
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1not-accessiblecurrent
pdnCpIwfAal2StatsEntry
OBJECT-TYPE
Contained AAL2 stats for a VCC defined on this cpIwf.
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1.1not-accessiblecurrent
pdnCpIwfAal2CpsRxPkts
OBJECT-TYPE
Number of CPS Received.
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1.1.1Counter32read-onlycurrent
pdnCpIwfAal2CpsTxPkts
OBJECT-TYPE
Number of CPS Transmitted.
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1.1.2Counter32read-onlycurrent
pdnCpIwfAal2CpsParityErrors
OBJECT-TYPE
Number of errors encountered as specified in Table 6/I.363.2 (errnum=0)
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1.1.3Counter32read-onlycurrent
pdnCpIwfAal2CpsSeqNumErrors
OBJECT-TYPE
Number of errors encountered as specified in Table 6/I.363.2 (errnum=1)
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1.1.4Counter32read-onlycurrent
pdnCpIwfAal2CpsOsfMismatchErrors
OBJECT-TYPE
Number of errors encountered as specified in Table 6/I.363.2 (errnum=2)
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1.1.5Counter32read-onlycurrent
pdnCpIwfAal2CpsOsfErrors
OBJECT-TYPE
Number of errors encountered as specified in Table 6/I.363.2 (errnum=3)
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1.1.6Counter32read-onlycurrent
pdnCpIwfAal2CpsHecErrors
OBJECT-TYPE
Number of errors encountered as specified in Table 6/I.363.2 (errnum=4)
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1.1.7Counter32read-onlycurrent
pdnCpIwfAal2CpsOversizeSduErrors
OBJECT-TYPE
Number of errors encountered as specified in Table 6/I.363.2 (errnum=5)
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1.1.8Counter32read-onlycurrent
pdnCpIwfAal2CpsReassemblyErrors
OBJECT-TYPE
Number of errors encountered as specified in Table 6/I.363.2 (errnum=6)
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1.1.9Counter32read-onlycurrent
pdnCpIwfAal2CpsHecOverlapErrors
OBJECT-TYPE
Number of errors encountered as specified in Table 6/I.363.2 (errnum=7)
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1.1.10Counter32read-onlycurrent
pdnCpIwfAal2CpsUuiErrors
OBJECT-TYPE
Number of errors encountered as specified in Table 6/I.363.2 (errnum=8)
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1.1.11Counter32read-onlycurrent
pdnCpIwfAal2CpsCidErrors
OBJECT-TYPE
Number of errors encountered as specified in Table 6/I.363.2 (errnum=9)
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1.1.12Counter32read-onlycurrent
pdnPotsPortStatsTable
OBJECT-TYPE
This table is used to maintain statistics per Pots port.
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2not-accessiblecurrent
pdnPotsPortStatsEntry
OBJECT-TYPE
Contained statistics per Pots Port.
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1not-accessiblecurrent
pdnPotsPortTotalCalls
OBJECT-TYPE
Total Number of successfull calls performed on this POTS port.
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.1Counter32read-onlycurrent
pdnPotsPortTotalCallsFailure
OBJECT-TYPE
Total number of calls that failed on this POTS port.
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.2Counter32read-onlycurrent
pdnPotsPortTotalCallsDropped
OBJECT-TYPE
Total number of calls (in/out) that were dropped on this POTS port.
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.3Counter32read-onlycurrent
pdnPotsPortInCallsReceived
OBJECT-TYPE
Total number of incoming calls received on this POTS port.
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.4Counter32read-onlycurrent
pdnPotsPortInCallsAnswered
OBJECT-TYPE
Total number of incoming calls answered on this POTS port.
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.5Counter32read-onlycurrent
pdnPotsPortInCallsConnected
OBJECT-TYPE
Total number of incoming calls connected on this POTS port.
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.6Counter32read-onlycurrent
pdnPotsPortInCallsFailure
OBJECT-TYPE
Total number of incoming calls that failed on this POTS port.
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.7Counter32read-onlycurrent
pdnPotsPortOutCallsAttempted
OBJECT-TYPE
Total number of outgoing calls that were attempted on this POTS port.
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.8Counter32read-onlycurrent
pdnPotsPortOutCallsAnswered
OBJECT-TYPE
Total number of outgoing calls that were answered on this POTS port.
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.9Counter32read-onlycurrent
pdnPotsPortOutCallsConnected
OBJECT-TYPE
Total number of outgoing calls that were connected on this POTS port.
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.10Counter32read-onlycurrent
pdnPotsPortOutCallsFailure
OBJECT-TYPE
Total number of outgoing calls that failed on this POTS port.
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.11Counter32read-onlycurrent
pdnPotsPortPacketsSent
OBJECT-TYPE
Total number of packets transmitted by this POTS port.
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.12Counter32read-onlycurrent
pdnPotsPortPacketsReceived
OBJECT-TYPE
Total number of packets received by this POTS port.
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.13Counter32read-onlycurrent
pdnPotsPortPacketsLost
OBJECT-TYPE
Total number of packets lost by this POTS port.
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.14Counter32read-onlycurrent
pdnPotsPortBytesSent
OBJECT-TYPE
Total number of bytes transmitted by this POTS port.
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.15Counter32read-onlycurrent
pdnPotsPortBytesReceived
OBJECT-TYPE
Total number of bytes received by this POTS port.
1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.16Counter32read-onlycurrent
pdnCpIwfMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.50.1.2
pdnCpIwfMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.50.1.2.1
pdnCpIwfMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.1795.2.24.2.50.1.2.2

Conformance

NameOIDStatus
pdnCpIwfMIBCompliance
MODULE-COMPLIANCE
The compliance statement for SNMP entities that support LES as specified in af-vmoa-0145.000 of the ATM Forum. This compliance has been deprecated and replaced by V2 below.
1.3.6.1.4.1.1795.2.24.2.50.1.2.1.1deprecated
pdnCpIwfMIBComplianceV2
MODULE-COMPLIANCE
The compliance statement for SNMP entities that support LES as specified in af-vmoa-0145.000 of the ATM Forum. This compliance statement superseeds the pdnCpIwfMIBCompliance. This compliance has been deprecated and replaced by V3 below.
1.3.6.1.4.1.1795.2.24.2.50.1.2.1.2deprecated
pdnCpIwfMIBComplianceV3
MODULE-COMPLIANCE
The compliance statement for SNMP entities that support LES as specified in af-vmoa-0145.000 of the ATM Forum. This compliance statement superseeds the pdnCpIwfMIBComplianceV2.
1.3.6.1.4.1.1795.2.24.2.50.1.2.1.3current
pdnCpIwfGeneralConfigGroup
OBJECT-GROUP
General Configuration of CpIwf ports
1.3.6.1.4.1.1795.2.24.2.50.1.2.2.1deprecated
pdnCpIwfPotsPortConfigGroup
OBJECT-GROUP
Configuration group for Pots ports This group is now deprecated by pdnCpIwfPotsPortConfigGroupV2.
1.3.6.1.4.1.1795.2.24.2.50.1.2.2.2deprecated
pdnCpIwfAal2StatsGroup
OBJECT-GROUP
Aal2 stats per CpIwf
1.3.6.1.4.1.1795.2.24.2.50.1.2.2.3current
pdnCpIwfPotsPortStatsGroup
OBJECT-GROUP
Pots Ports stats group
1.3.6.1.4.1.1795.2.24.2.50.1.2.2.4deprecated
pdnCpIwfGeneralConfigGroupV2
OBJECT-GROUP
Configuration of general parameters related to the CpIwf. This group superseeds the pdnCpIwfGeneralConfigGroup which was splitted in two groups.
1.3.6.1.4.1.1795.2.24.2.50.1.2.2.5current
pdnCpIwfIADConfigGroupV2
OBJECT-GROUP
Configuration of each CpIwf interfaces in the device. This group superseeds the pdnCpIwfGeneralConfigGroup which was splitted in two groups. This group is now deprecated by pdnCpIwfPotsPortConfigGroupV3.
1.3.6.1.4.1.1795.2.24.2.50.1.2.2.6current
pdnCpIwfPotsPortStatsGroupV2
OBJECT-GROUP
Pots Ports stats group
1.3.6.1.4.1.1795.2.24.2.50.1.2.2.7current
pdnCpIwfPotsPortConfigGroupV2
OBJECT-GROUP
Configuration group for Pots ports
1.3.6.1.4.1.1795.2.24.2.50.1.2.2.8current
pdnCpIwfPotsPortTestGroupV2
OBJECT-GROUP
Pots Ports test group
1.3.6.1.4.1.1795.2.24.2.50.1.2.2.9current
pdnCpIwfIADConfigGroupV3
OBJECT-GROUP
Configuration of each CpIwf interfaces in the device. This group superseeds the pdnCpIwfGeneralConfigGroupV2.
1.3.6.1.4.1.1795.2.24.2.50.1.2.2.10current
pdnCpIwfPotsPortPacketStatsGroup
OBJECT-GROUP
Pots Ports packet statistics group
1.3.6.1.4.1.1795.2.24.2.50.1.2.2.11current