MIBs Depot

PCUBE-SE-MIB

Registered at
1.3.6.1.4.1.5655.2.3
1.3.6.1.4.1.5655.4.0
1.3.6.1.4.1.5655.4.1
Last updated
2006-11-07 00:00
Organization
Cisco Systems, Inc.
Revisions
2006-11-07 00:00, 2006-05-10 00:00, 2006-02-12 00:00, 2005-08-16 00:00, 2004-12-12 00:00, 2004-07-01 00:00, 2003-07-02 00:00, 2003-01-05 00:00
Namespace
pcube
Source file
PCUBE-SE-MIB
Digest
sha256:1fa98006462a38c888b692f2ff87ff84848353c020497acd901317d581b2243a

Description

Main SNMP MIB for Cisco's SCE OS products such as SCE2000 and SE100. This MIB provides configuration and runtime status for chassis, control modules, and line modules on the SCOS systems.

Contact

Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-sce@cisco.com

Imports

FromSymbols
PCUBE-SMIpcubeModules, pcubeWorkgroup
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

PCUBE-SE-MIB
PCUBE-SMI
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
LinkModeType
TEXTUAL-CONVENTION
The various modes of a link.
current

Objects

NameOIDSyntaxAccessStatus
pcubeSeConformance
OBJECT-IDENTITY
1.3.6.1.4.1.5655.2.3.1
pcubeSeGroups
OBJECT-IDENTITY
1.3.6.1.4.1.5655.2.3.1.1
pcubeSeCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.5655.2.3.1.2
pcubeSeEvents
OBJECT-IDENTITY
1.3.6.1.4.1.5655.4.0
pcubeSeEventGenericString1
OBJECT-TYPE
Temporary string used for traps. Always returns an empty string.
1.3.6.1.4.1.5655.4.0.23SnmpAdminStringread-onlycurrent
pcubeSeEventGenericString2
OBJECT-TYPE
Temporary string used for traps. Always returns an empty string.
1.3.6.1.4.1.5655.4.0.24SnmpAdminStringread-onlycurrent
pullRequestNumber
OBJECT-TYPE
Used only for traps to signify the number of pull requests issued so far for the anonymous subscriber given in the pullRequestRetryFailedTrap containing notification. A direct get will always returns 0.
1.3.6.1.4.1.5655.4.0.46Integer32 (1..65535)read-onlycurrent
pcubeSEObjs
OBJECT-IDENTITY
1.3.6.1.4.1.5655.4.1
systemGrp
OBJECT-IDENTITY
1.3.6.1.4.1.5655.4.1.1
sysOperationalStatus
OBJECT-TYPE
Indicates the operational status of the system.
1.3.6.1.4.1.5655.4.1.1.1INTEGER {other(1), boot(2), operational(3), warning(4), failure(5)}read-onlycurrent
sysFailureRecovery
OBJECT-TYPE
Indicates if the system should enter a Failure mode after abnormal boot.
1.3.6.1.4.1.5655.4.1.1.2INTEGER {other(1), operational(2), nonOperational(3)}read-onlycurrent
sysVersion
OBJECT-TYPE
The system version.
1.3.6.1.4.1.5655.4.1.1.3SnmpAdminStringread-onlycurrent
pchassisGrp
OBJECT-IDENTITY
1.3.6.1.4.1.5655.4.1.2
pchassisSysType
OBJECT-TYPE
The chassis system type.
1.3.6.1.4.1.5655.4.1.2.1INTEGER {other(1), sce1000(2), se100(3), sce2000(4)}read-onlycurrent
pchassisPowerSupplyAlarm
OBJECT-TYPE
Indicates if the power supply to the chassis is normal. If the status is not 'ok' it means that one or more power supplies are not functional.
1.3.6.1.4.1.5655.4.1.2.2INTEGER {other(1), off(2), on(3)}read-onlycurrent
pchassisFansAlarm
OBJECT-TYPE
Indicates if all the fans on the chassis are functional.
1.3.6.1.4.1.5655.4.1.2.3INTEGER {other(1), off(2), on(3)}read-onlycurrent
pchassisTempAlarm
OBJECT-TYPE
The chassis temperature alarm status.
1.3.6.1.4.1.5655.4.1.2.4INTEGER {other(1), off(2), on(3)}read-onlycurrent
pchassisVoltageAlarm
OBJECT-TYPE
The chassis internal voltage alarm status. If the alarm is 'on' it indicates that the voltage level of one or more HW units is not in the normal range.
1.3.6.1.4.1.5655.4.1.2.5INTEGER {other(1), off(2), on(3)}read-onlycurrent
pchassisNumSlots
OBJECT-TYPE
Indicates the number of slots in the chassis available for plug-in modules. This number counts slots that are already occupied as well as empty slots.
1.3.6.1.4.1.5655.4.1.2.6Integer32 (0..255)read-onlycurrent
pchassisSlotConfig
OBJECT-TYPE
An indication of which slots in the chassis have modules inserted. This is an integer value with bits set to indicate configured modules. It can be interpreted as a sum of f(x) as x goes from 1 to the number of slots, where f(x) = 0 for no module inserted and f(x) = exp(2, x-1) for a module inserted.
1.3.6.1.4.1.5655.4.1.2.7Integer32 (0..65535)read-onlycurrent
pchassisPsuType
OBJECT-TYPE
Indicates the type of the power supplies.
1.3.6.1.4.1.5655.4.1.2.8INTEGER {other(1), ac(2), dc(3)}read-onlycurrent
pchassisLineFeedAlarm
OBJECT-TYPE
Indicates if the line feed to the chassis is normal. If the status is not 'ok' it means that one or more line feeds are not connected or have no power.
1.3.6.1.4.1.5655.4.1.2.10INTEGER {other(1), off(2), on(3)}read-onlycurrent
pmoduleGrp
OBJECT-IDENTITY
1.3.6.1.4.1.5655.4.1.3
pmoduleTable
OBJECT-TYPE
A list of module entries. The number of entries is the number of modules in the chassis.
1.3.6.1.4.1.5655.4.1.3.1not-accessiblecurrent
pmoduleEntry
OBJECT-TYPE
Entry containing information about one module in the chassis.
1.3.6.1.4.1.5655.4.1.3.1.1not-accessiblecurrent
pmoduleIndex
OBJECT-TYPE
A unique value for each module within the chassis.
1.3.6.1.4.1.5655.4.1.3.1.1.1Integer32 (1..255)read-onlycurrent
pmoduleType
OBJECT-TYPE
The type of module.
1.3.6.1.4.1.5655.4.1.3.1.1.2INTEGER {other(1), gbe2Module(2), fe2Module(3), gbe4Module(4), fe4Module(5), oc124Module(6), fe8Module(7)}read-onlycurrent
pmoduleNumTrafficProcessors
OBJECT-TYPE
The number of traffic processors supported by this module.
1.3.6.1.4.1.5655.4.1.3.1.1.3Integer32 (0..255)read-onlycurrent
pmoduleSlotNum
OBJECT-TYPE
This value is determined by the chassis slot number where this module is located. Valid entries are 1 to the value of chassisNumSlots.
1.3.6.1.4.1.5655.4.1.3.1.1.4Integer32 (1..255)read-onlycurrent
pmoduleHwVersion
OBJECT-TYPE
The hardware version of the module.
1.3.6.1.4.1.5655.4.1.3.1.1.5SnmpAdminStringread-onlycurrent
pmoduleNumPorts
OBJECT-TYPE
The number of ports supported by this module.
1.3.6.1.4.1.5655.4.1.3.1.1.6Integer32 (0..255)read-onlycurrent
pmoduleConnectionMode
OBJECT-TYPE
Indicates the connection mode of a module.
1.3.6.1.4.1.5655.4.1.3.1.1.8INTEGER {other(1), inline(2), receiveOnly(3), inlineCascade(4), receiveOnlyCascade(5)}read-onlycurrent
pmoduleSerialNumber
OBJECT-TYPE
Indicates the serial number of the module.
1.3.6.1.4.1.5655.4.1.3.1.1.9SnmpAdminStringread-onlycurrent
pmoduleUpStreamAttackFilteringTime
OBJECT-TYPE
Indicates the accumulated time which attack up-stream traffic was filtered.
1.3.6.1.4.1.5655.4.1.3.1.1.10TimeTicksread-onlycurrent
pmoduleUpStreamLastAttackFilteringTime
OBJECT-TYPE
Indicates the time since the previous attack was filtered in the up-stream traffic.
1.3.6.1.4.1.5655.4.1.3.1.1.11TimeTicksread-onlycurrent
pmoduleDownStreamAttackFilteringTime
OBJECT-TYPE
Indicates the accumulated time which attack down-stream traffic was filtered.
1.3.6.1.4.1.5655.4.1.3.1.1.12TimeTicksread-onlycurrent
pmoduleDownStreamLastAttackFilteringTime
OBJECT-TYPE
Indicates the time since the previous attack was filtered in the down-stream traffic.
1.3.6.1.4.1.5655.4.1.3.1.1.13TimeTicksread-onlycurrent
pmoduleAttackObjectsClearTime
OBJECT-TYPE
Indicates the time since the attack objects were cleared. Writing a 0 to this object causes the counters to be cleared.
1.3.6.1.4.1.5655.4.1.3.1.1.14TimeTicksread-writecurrent
pmoduleAdminStatus
OBJECT-TYPE
Indicates configuration of a module in respect to whether the module should handle traffic.
1.3.6.1.4.1.5655.4.1.3.1.1.15INTEGER {other(1), primary(2), secondary(3)}read-onlycurrent
pmoduleOperStatus
OBJECT-TYPE
Indicates current module's role in respect to whether the module handles traffic.
1.3.6.1.4.1.5655.4.1.3.1.1.16INTEGER {other(1), active(2), standby(3)}read-onlycurrent
linkGrp
OBJECT-IDENTITY
1.3.6.1.4.1.5655.4.1.4
linkTable
OBJECT-TYPE
The Link table provides information regarding the configuration and status of the links that pass through the SE and carry inband traffic. The number of entries in this table is determined by the number of modules in the chassis and the number of links on each module.
1.3.6.1.4.1.5655.4.1.4.1not-accessiblecurrent
linkEntry
OBJECT-TYPE
Entry containing information about the Link.
1.3.6.1.4.1.5655.4.1.4.1.1not-accessiblecurrent
linkModuleIndex
OBJECT-TYPE
An index value that uniquely identifies the module where this link is located.
1.3.6.1.4.1.5655.4.1.4.1.1.1Integer32 (1..255)read-onlycurrent
linkIndex
OBJECT-TYPE
An index value that uniquely identifies this link within a module. Valid entries are 1 to the value of moduleNumLinks for this module.
1.3.6.1.4.1.5655.4.1.4.1.1.2Integer32 (1..255)read-onlycurrent
linkAdminModeOnActive
OBJECT-TYPE
The desired mode of the link when the module's operating status is Active and the module is not in boot or failure. The possible modes are bypass, forwarding and sniffing. In bypass mode the traffic is forwarded from one port to the other using an internal splitter. In forwarding mode the traffic is forwarded through the internal hardware and software modules of the SE. In sniffing mode the traffic is passed in the same manner as in bypass mode, however a copy of the traffic is made and analyzed internally in the box.
1.3.6.1.4.1.5655.4.1.4.1.1.3LinkModeTyperead-onlycurrent
linkAdminModeOnFailure
OBJECT-TYPE
The desired mode of the link when the system's operational status is Failure. The possible modes are Bypass and Cutoff. In Bypass mode the traffic is forwarded from one port to the other using an internal splitter. In Cutoff mode the traffic is dropped by the SE.
1.3.6.1.4.1.5655.4.1.4.1.1.4LinkModeTyperead-onlycurrent
linkOperMode
OBJECT-TYPE
The operational mode of the link. In Bypass mode the traffic is forwarded from one port to the other using an internal splitter. In Forwarding mode the traffic is forwarded through the internal software and hardware modules of the SCE. In Sniffing mode the traffic is forwarded in the same manner as in Bypass mode, however the traffic is passed through the internal software and hardware modules of the SCE for analyzing. in Cutoff mode the traffic is dropped by the SCE platform.
1.3.6.1.4.1.5655.4.1.4.1.1.5LinkModeTyperead-onlycurrent
linkStatusReflectionEnable
OBJECT-TYPE
Indicates if failure of the physical link on one i/f should trigger the failure of the link on the other i/f.
1.3.6.1.4.1.5655.4.1.4.1.1.6INTEGER {enabled(1), disabled(2)}read-onlycurrent
linkSubscriberSidePortIndex
OBJECT-TYPE
An index value that uniquely identifies this link with its related port that is connected to the subscriber side.
1.3.6.1.4.1.5655.4.1.4.1.1.7Integer32 (1..255)read-onlycurrent
linkNetworkSidePortIndex
OBJECT-TYPE
An index value that uniquely identifies this link with its related port that is connected to the network side.
1.3.6.1.4.1.5655.4.1.4.1.1.8Integer32 (1..255)read-onlycurrent
diskGrp
OBJECT-IDENTITY
1.3.6.1.4.1.5655.4.1.5
diskNumUsedBytes
OBJECT-TYPE
The number of used bytes.
1.3.6.1.4.1.5655.4.1.5.1Unsigned32 (0..4294967295)read-onlycurrent
diskNumFreeBytes
OBJECT-TYPE
The number of free bytes.
1.3.6.1.4.1.5655.4.1.5.2Unsigned32 (0..4294967295)read-onlycurrent
rdrFormatterGrp
OBJECT-IDENTITY
1.3.6.1.4.1.5655.4.1.6
rdrFormatterEnable
OBJECT-TYPE
Indicates whether the RDR-formatter is enabled or disabled. When the RDR-formatter is enabled, it sends the reports it gets from the traffic processors to the Data Collector as defined in the rdrFormatterDestTable.
1.3.6.1.4.1.5655.4.1.6.1INTEGER {enabled(1), disabled(2)}read-onlycurrent
rdrFormatterDestTable
OBJECT-TYPE
The RDR-formatter destinations table (0 to 3 entries). This table lists the addresses of Data Collectors. If the RDR-formatter is enabled, the destination with the highest priority that a TCP connection to it can be established would receive the reports generated by the traffic processors.
1.3.6.1.4.1.5655.4.1.6.2not-accessiblecurrent
rdrFormatterDestEntry
OBJECT-TYPE
A destination table entry.
1.3.6.1.4.1.5655.4.1.6.2.1not-accessiblecurrent
rdrFormatterDestIPAddr
OBJECT-TYPE
The IP address of a Data Collector.
1.3.6.1.4.1.5655.4.1.6.2.1.1IpAddressread-onlycurrent
rdrFormatterDestPort
OBJECT-TYPE
The TCP port on which the Data Collector listens.
1.3.6.1.4.1.5655.4.1.6.2.1.2Integer32 (1..65535)read-onlycurrent
rdrFormatterDestPriority
OBJECT-TYPE
The priority given to the Data Collector. The active Data Collector is the Data Collector with the highest priority and a TCP connection that is up.
1.3.6.1.4.1.5655.4.1.6.2.1.3Integer32 (1..100)read-onlycurrent
rdrFormatterDestStatus
OBJECT-TYPE
In 'redundancy(2)' and in 'simpleLoadBalancing(3)' rdrFormatterForwardingMode there can be only one 'active' destination, which is where the reports are currently being sent to. In 'multicast(4)' modes all destinations will receive the active(2) status.
1.3.6.1.4.1.5655.4.1.6.2.1.4INTEGER {other(1), active(2), standby(3)}read-onlycurrent
rdrFormatterDestConnectionStatus
OBJECT-TYPE
Indicates the status of TCP connection to this destination.
1.3.6.1.4.1.5655.4.1.6.2.1.5INTEGER {other(1), up(2), down(3)}read-onlycurrent
rdrFormatterDestNumReportsSent
OBJECT-TYPE
Indicates the number of reports sent by the RDR-formatter to this destination.
1.3.6.1.4.1.5655.4.1.6.2.1.6Unsigned32 (0..4294967295)read-onlycurrent
rdrFormatterDestNumReportsDiscarded
OBJECT-TYPE
Indicates the number of reports dropped by the RDR-formatter on this destination.
1.3.6.1.4.1.5655.4.1.6.2.1.7Unsigned32 (0..4294967295)read-onlycurrent
rdrFormatterDestReportRate
OBJECT-TYPE
Indicates the rate of the reports (in reports per second) currently sent to this destination.
1.3.6.1.4.1.5655.4.1.6.2.1.8Unsigned32 (0..4294967295)read-onlycurrent
rdrFormatterDestReportRatePeak
OBJECT-TYPE
Indicates the maximum report rate sent to this destination.
1.3.6.1.4.1.5655.4.1.6.2.1.9Unsigned32 (0..4294967295)read-onlycurrent
rdrFormatterDestReportRatePeakTime
OBJECT-TYPE
Indicates the time since the rdrFormatterDestReportRatePeak value occurred.
1.3.6.1.4.1.5655.4.1.6.2.1.10TimeTicksread-onlycurrent
rdrFormatterNumReportsSent
OBJECT-TYPE
Indicates the number of reports sent by the RDR-formatter.
1.3.6.1.4.1.5655.4.1.6.3Unsigned32 (0..4294967295)read-onlycurrent
rdrFormatterNumReportsDiscarded
OBJECT-TYPE
Indicates the number of reports dropped by the RDR-formatter.
1.3.6.1.4.1.5655.4.1.6.4Unsigned32 (0..4294967295)read-onlycurrent
rdrFormatterClearCountersTime
OBJECT-TYPE
The time since RDR-formatter counters were last cleared. Writing a 0 to this object causes the RDR-formatter counters to be cleared.
1.3.6.1.4.1.5655.4.1.6.5TimeTicksread-writecurrent
rdrFormatterReportRate
OBJECT-TYPE
Indicates the rate of the reports (in reports per second) currently sent to all of the destinations.
1.3.6.1.4.1.5655.4.1.6.6Unsigned32 (0..4294967295)read-onlycurrent
rdrFormatterReportRatePeak
OBJECT-TYPE
Indicates the maximum report rate sent to all of the destinations.
1.3.6.1.4.1.5655.4.1.6.7Unsigned32 (0..4294967295)read-onlycurrent
rdrFormatterReportRatePeakTime
OBJECT-TYPE
Indicates the time since the rdrFormatterReportRatePeak value occurred.
1.3.6.1.4.1.5655.4.1.6.8TimeTicksread-onlycurrent
rdrFormatterProtocol
OBJECT-TYPE
Indicates the RDR protocol currently in use.
1.3.6.1.4.1.5655.4.1.6.9INTEGER {other(1), rdrv1(2), rdrv2(3)}read-onlycurrent
rdrFormatterForwardingMode
OBJECT-TYPE
Indicates the mode of how the RDR formatter sends the reports to its destinations.
1.3.6.1.4.1.5655.4.1.6.10INTEGER {other(1), redundancy(2), simpleLoadBalancing(3), multicast(4)}read-onlycurrent
rdrFormatterCategoryTable
OBJECT-TYPE
The RDR-formatter Category table. Describes the different categories of RDRs and RDR destination groups.
1.3.6.1.4.1.5655.4.1.6.11not-accessiblecurrent
rdrFormatterCategoryEntry
OBJECT-TYPE
A category table entry.
1.3.6.1.4.1.5655.4.1.6.11.1not-accessiblecurrent
rdrFormatterCategoryIndex
OBJECT-TYPE
The category number.
1.3.6.1.4.1.5655.4.1.6.11.1.1Integer32 (1..4)read-onlycurrent
rdrFormatterCategoryName
OBJECT-TYPE
The name given to this category.
1.3.6.1.4.1.5655.4.1.6.11.1.2SnmpAdminStringread-onlycurrent
rdrFormatterCategoryNumReportsSent
OBJECT-TYPE
Indicates the number of reports sent by the RDR-formatter to this category.
1.3.6.1.4.1.5655.4.1.6.11.1.3Unsigned32 (0..4294967295)read-onlycurrent
rdrFormatterCategoryNumReportsDiscarded
OBJECT-TYPE
Indicates the number of reports dropped by the RDR-formatter on this category.
1.3.6.1.4.1.5655.4.1.6.11.1.4Unsigned32 (0..4294967295)read-onlycurrent
rdrFormatterCategoryReportRate
OBJECT-TYPE
Indicates the rate of the reports (in reports per second) currently sent to this category.
1.3.6.1.4.1.5655.4.1.6.11.1.5Unsigned32 (0..4294967295)read-onlycurrent
rdrFormatterCategoryReportRatePeak
OBJECT-TYPE
Indicates the maximum report rate sent to this category.
1.3.6.1.4.1.5655.4.1.6.11.1.6Unsigned32 (0..4294967295)read-onlycurrent
rdrFormatterCategoryReportRatePeakTime
OBJECT-TYPE
Indicates the time since the rdrFormatterCategoryReportRatePeak value occurred.
1.3.6.1.4.1.5655.4.1.6.11.1.7TimeTicksread-onlycurrent
rdrFormatterCategoryNumReportsQueued
OBJECT-TYPE
Indicates the amount of pending reports in this category.
1.3.6.1.4.1.5655.4.1.6.11.1.8Unsigned32 (0..4294967295)read-onlycurrent
rdrFormatterCategoryDestTable
OBJECT-TYPE
The RDR-formatter Category destinations table. This table lists the addresses of Data Collectors. If the RDR-formatter is enabled, the destination with the highest priority that a TCP connection to it can be established would receive the reports generated by the traffic processors.
1.3.6.1.4.1.5655.4.1.6.12not-accessiblecurrent
rdrFormatterCategoryDestEntry
OBJECT-TYPE
A destination table entry.
1.3.6.1.4.1.5655.4.1.6.12.1not-accessiblecurrent
rdrFormatterCategoryDestPriority
OBJECT-TYPE
The priority given to the Data Collector for this category. The active Data Collector is the Data Collector with the highest priority and a TCP connection that is up.
1.3.6.1.4.1.5655.4.1.6.12.1.1Integer32 (1..100)read-onlycurrent
rdrFormatterCategoryDestStatus
OBJECT-TYPE
In modes 'redundancy(2)' and in 'simpleLoadBalancing(3)' there can be only one 'active' destination, which is the destination to which reports are being sent. In 'multicast(4)' modes all destination will receive the 'active(2)' status.
1.3.6.1.4.1.5655.4.1.6.12.1.2INTEGER {other(1), active(2), standby(3)}read-onlycurrent
loggerGrp
OBJECT-IDENTITY
1.3.6.1.4.1.5655.4.1.7
loggerUserLogEnable
OBJECT-TYPE
Indicates whether the logging of user information is enabled or disabled.
1.3.6.1.4.1.5655.4.1.7.1INTEGER {enabled(1), disabled(2)}read-onlycurrent
loggerUserLogNumInfo
OBJECT-TYPE
Indicates the number of Info messages logged into the user log file since last reboot or last time the counter was cleared.
1.3.6.1.4.1.5655.4.1.7.2Unsigned32 (0..4294967295)read-onlycurrent
loggerUserLogNumWarning
OBJECT-TYPE
Indicates the number of Warning messages logged into the user log file since last reboot or last time the counter was cleared.
1.3.6.1.4.1.5655.4.1.7.3Unsigned32 (0..4294967295)read-onlycurrent
loggerUserLogNumError
OBJECT-TYPE
Indicates the number of Error messages logged into the user log file since last reboot or last time the counter was cleared.
1.3.6.1.4.1.5655.4.1.7.4Unsigned32 (0..4294967295)read-onlycurrent
loggerUserLogNumFatal
OBJECT-TYPE
Indicates the number of Fatal messages logged into the User-Log since last reboot or last time the counter was cleared.
1.3.6.1.4.1.5655.4.1.7.5Unsigned32 (0..4294967295)read-onlycurrent
loggerUserLogClearCountersTime
OBJECT-TYPE
The time since user log counters were last cleared. Writing a 0 to this object causes the user log counters to be cleared.
1.3.6.1.4.1.5655.4.1.7.6TimeTicksread-writecurrent
subscribersGrp
OBJECT-IDENTITY
1.3.6.1.4.1.5655.4.1.8
subscribersInfoTable
OBJECT-TYPE
The subscribers information table consists of data regarding subscribers management operations performed.
1.3.6.1.4.1.5655.4.1.8.1not-accessiblecurrent
subscribersInfoEntry
OBJECT-TYPE
A SubscribersInfoEntry entry.
1.3.6.1.4.1.5655.4.1.8.1.1not-accessiblecurrent
subscribersNumIntroduced
OBJECT-TYPE
Indicates the current number of subscribers introduced to the SCE. These subscribers may or may not have IP address or VLAN mappings. Subscribers who do not have mappings of any kind cannot be associated with traffic, thus will be served by the SCE according to the default settings.
1.3.6.1.4.1.5655.4.1.8.1.1.1Unsigned32 (0..4294967295)read-onlycurrent
subscribersNumFree
OBJECT-TYPE
Indicates the number of subscribers that may be introduced in addition to the subscribers that are already introduced to the SCE (subscribersNumIntroduced).
1.3.6.1.4.1.5655.4.1.8.1.1.2Unsigned32 (0..4294967295)read-onlycurrent
subscribersNumIpAddrMappings
OBJECT-TYPE
Indicates the current number of 'IP address to subscriber' mappings.
1.3.6.1.4.1.5655.4.1.8.1.1.3Unsigned32 (0..4294967295)read-onlycurrent
subscribersNumIpAddrMappingsFree
OBJECT-TYPE
Indicates the number of free 'IP address to subscriber' mappings that may be used for defining new mappings.
1.3.6.1.4.1.5655.4.1.8.1.1.4Unsigned32 (0..4294967295)read-onlycurrent
subscribersNumIpRangeMappings
OBJECT-TYPE
Indicates the current number of 'IP-range to subscriber' mappings.
1.3.6.1.4.1.5655.4.1.8.1.1.5Unsigned32 (0..4294967295)read-onlycurrent
subscribersNumIpRangeMappingsFree
OBJECT-TYPE
Indicates the number of free 'IP-range to subscriber' mappings that may be used for defining new mappings.
1.3.6.1.4.1.5655.4.1.8.1.1.6Unsigned32 (0..4294967295)read-onlycurrent
subscribersNumVlanMappings
OBJECT-TYPE
Indicates the current number of VLAN to subscribers mappings.
1.3.6.1.4.1.5655.4.1.8.1.1.7Unsigned32 (0..4294967295)read-onlycurrent
subscribersNumVlanMappingsFree
OBJECT-TYPE
Indicates the number of free 'VLAN to subscriber' mappings that may be used for defining new mappings.
1.3.6.1.4.1.5655.4.1.8.1.1.8Unsigned32 (0..4294967295)read-onlycurrent
subscribersNumActive
OBJECT-TYPE
Indicates the current number of active subscribers, these subscribers necessarily have an IP address or VLAN mappings that define the traffic that should be associated and served according to the subscriber service agreement.
1.3.6.1.4.1.5655.4.1.8.1.1.9Unsigned32 (0..4294967295)read-onlycurrent
subscribersNumActivePeak
OBJECT-TYPE
Indicates the peak value of subscribersNumActive since the last time it was cleared or the system started.
1.3.6.1.4.1.5655.4.1.8.1.1.10Unsigned32 (0..4294967295)read-onlycurrent
subscribersNumActivePeakTime
OBJECT-TYPE
Indicates the time since the subscribersNumActivePeak value occurred.
1.3.6.1.4.1.5655.4.1.8.1.1.11TimeTicksread-onlycurrent
subscribersNumUpdates
OBJECT-TYPE
Indicates the accumulated number of subscribers database updates received by the SCE.
1.3.6.1.4.1.5655.4.1.8.1.1.12Unsigned32 (0..4294967295)read-onlycurrent
subscribersCountersClearTime
OBJECT-TYPE
Indicates the time since the subscribers counters were cleared. Writing a 0 to this object causes the counters to be cleared.
1.3.6.1.4.1.5655.4.1.8.1.1.13TimeTicksread-writecurrent
subscribersNumTpIpRanges
OBJECT-TYPE
Indicates the current number of 'Traffic Processor IP ranges' used.
1.3.6.1.4.1.5655.4.1.8.1.1.14Unsigned32 (0..4294967295)read-onlycurrent
subscribersNumTpIpRangesFree
OBJECT-TYPE
Indicates the number of free 'Traffic Processor IP ranges'.
1.3.6.1.4.1.5655.4.1.8.1.1.15Unsigned32 (0..4294967295)read-onlycurrent
subscribersNumAnonymous
OBJECT-TYPE
Indicates the current number of anonymous subscribers.
1.3.6.1.4.1.5655.4.1.8.1.1.16Unsigned32 (0..4294967295)read-onlycurrent
subscribersNumWithSessions
OBJECT-TYPE
Indicates the current number of subscribers with open sessions.
1.3.6.1.4.1.5655.4.1.8.1.1.17Unsigned32 (0..4294967295)read-onlycurrent
subscribersPropertiesTable
OBJECT-TYPE
The subscribers properties table provides the list of properties available for each subscriber.
1.3.6.1.4.1.5655.4.1.8.2not-accessiblecurrent
subscribersPropertiesEntry
OBJECT-TYPE
A subscribersPropertiesTable entry.
1.3.6.1.4.1.5655.4.1.8.2.1not-accessiblecurrent
spIndex
OBJECT-TYPE
An index value that uniquely identify the property.
1.3.6.1.4.1.5655.4.1.8.2.1.1Integer32 (0..1000000)read-onlycurrent
spName
OBJECT-TYPE
Subscriber property name.
1.3.6.1.4.1.5655.4.1.8.2.1.2SnmpAdminString (SIZE(1..128))read-onlycurrent
spType
OBJECT-TYPE
Subscriber application property type in respect to: variable type (integer, boolean, string etc), number of elements (scalar or array) and restrictions if any exist.
1.3.6.1.4.1.5655.4.1.8.2.1.3SnmpAdminStringread-onlycurrent
subscribersPropertiesValueTable
OBJECT-TYPE
The subscribers properties value table is used to provide subscriber properties values for subscribers introduced into the SCE. An entry must be created by setting the entry's spvRowStatus object with createAndGo (4) before setting any other of the entry's objects. To specify the subscriber's property set the spvSubName and spvPropertyName objects. The spvPropertyName must be one of the properties from the subscribersPropertiesTable. To remove an entry set the spvRowStatus object with destroy (6). To poll the subscriber property the manager need to poll the spvPropertyStringValue, the spvPropertyUintValue or the spvPropertyCounter64Value objects. The table is cleared when the application is unloaded.
1.3.6.1.4.1.5655.4.1.8.3not-accessiblecurrent
subscribersPropertiesValueEntry
OBJECT-TYPE
A subscribersPropertiesValueTable entry.
1.3.6.1.4.1.5655.4.1.8.3.1not-accessiblecurrent
spvIndex
OBJECT-TYPE
A index to the table.
1.3.6.1.4.1.5655.4.1.8.3.1.1Integer32 (1..4096)not-accessiblecurrent
spvSubName
OBJECT-TYPE
A name that uniquely identifies the subscriber.
1.3.6.1.4.1.5655.4.1.8.3.1.2SnmpAdminString (SIZE(1..40))read-createcurrent
spvPropertyName
OBJECT-TYPE
A name that uniquely identifies the subscriber property. Array type properties may be accessed each element at a time in C like format, e.g. x[1], or y[1][2].
1.3.6.1.4.1.5655.4.1.8.3.1.3SnmpAdminString (SIZE(1..128))read-createcurrent
spvRowStatus
OBJECT-TYPE
This object controls creation of a table entry. Only setting the createAndGo (4) and destroy (6) will change the status of the entry.
1.3.6.1.4.1.5655.4.1.8.3.1.4RowStatusread-createcurrent
spvPropertyStringValue
OBJECT-TYPE
The value of the subscriber property in string format.
1.3.6.1.4.1.5655.4.1.8.3.1.5SnmpAdminString (SIZE(0..128))read-onlycurrent
spvPropertyUintValue
OBJECT-TYPE
The value of the subscriber property in unsigned integer. If the property can't be casted to unsigned integer this object returns zero.
1.3.6.1.4.1.5655.4.1.8.3.1.6Unsigned32 (0..4294967295)read-onlycurrent
spvPropertyCounter64Value
OBJECT-TYPE
The value of the subscriber property in Counter64. If the property can't be casted to Counter64 this object returns zero.
1.3.6.1.4.1.5655.4.1.8.3.1.7Counter64read-onlycurrent
trafficProcessorGrp
OBJECT-IDENTITY
1.3.6.1.4.1.5655.4.1.9
tpInfoTable
OBJECT-TYPE
The Traffic Processor Info table consists of data regarding traffic handled by the traffic processors by classification of packets and flows.
1.3.6.1.4.1.5655.4.1.9.1not-accessiblecurrent
tpInfoEntry
OBJECT-TYPE
A tpInfoTable entry.
1.3.6.1.4.1.5655.4.1.9.1.1not-accessiblecurrent
tpModuleIndex
OBJECT-TYPE
An index value that uniquely identifies the module where this traffic processor is located.
1.3.6.1.4.1.5655.4.1.9.1.1.1Integer32 (1..255)read-onlycurrent
tpIndex
OBJECT-TYPE
An index value that uniquely identifies this traffic processor within a module. The value is determined by the location of the traffic processor on the module. Valid entries are 1 to the value of moduleNumTrafficProcessors for this module.
1.3.6.1.4.1.5655.4.1.9.1.1.2Integer32 (1..255)read-onlycurrent
tpTotalNumHandledPackets
OBJECT-TYPE
Indicates the accumulated number of packets handled by this traffic processor since last reboot or last time this counter was cleared.
1.3.6.1.4.1.5655.4.1.9.1.1.3Unsigned32 (0..4294967295)read-onlycurrent
tpTotalNumHandledFlows
OBJECT-TYPE
Indicates the accumulated number of flows handled by this traffic Processor since last reboot or last time this counter was cleared.
1.3.6.1.4.1.5655.4.1.9.1.1.4Unsigned32 (0..4294967295)read-onlycurrent
tpNumActiveFlows
OBJECT-TYPE
Indicates the number of flows currently being handled by this traffic processor.
1.3.6.1.4.1.5655.4.1.9.1.1.5Unsigned32 (0..4294967295)read-onlycurrent
tpNumActiveFlowsPeak
OBJECT-TYPE
Indicates the peak value of tpNumActiveFlows since the last time it was cleared or the system started.
1.3.6.1.4.1.5655.4.1.9.1.1.6Unsigned32 (0..4294967295)read-onlycurrent
tpNumActiveFlowsPeakTime
OBJECT-TYPE
Indicates the time since the tpNumActiveFlowsPeak value occurred.
1.3.6.1.4.1.5655.4.1.9.1.1.7TimeTicksread-onlycurrent
tpNumTcpActiveFlows
OBJECT-TYPE
Indicates the number of TCP flows currently being handled by this traffic processor.
1.3.6.1.4.1.5655.4.1.9.1.1.8Unsigned32 (0..4294967295)read-onlycurrent
tpNumTcpActiveFlowsPeak
OBJECT-TYPE
Indicates the peak value of tpNumTcpActiveFlows since the last time it was cleared or the system started.
1.3.6.1.4.1.5655.4.1.9.1.1.9Unsigned32 (0..4294967295)read-onlycurrent
tpNumTcpActiveFlowsPeakTime
OBJECT-TYPE
Indicates the time since the tpNumTcpActiveFlowsPeak value occurred.
1.3.6.1.4.1.5655.4.1.9.1.1.10TimeTicksread-onlycurrent
tpNumUdpActiveFlows
OBJECT-TYPE
Indicates the number of UDP flows currently being handled by this traffic processor.
1.3.6.1.4.1.5655.4.1.9.1.1.11Unsigned32 (0..4294967295)read-onlycurrent
tpNumUdpActiveFlowsPeak
OBJECT-TYPE
Indicates the peak value of tpNumUdpActiveFlows since the last time it was cleared or the system started.
1.3.6.1.4.1.5655.4.1.9.1.1.12Unsigned32 (0..4294967295)read-onlycurrent
tpNumUdpActiveFlowsPeakTime
OBJECT-TYPE
Indicates the time since the tpNumUdpActiveFlowsPeak value occurred.
1.3.6.1.4.1.5655.4.1.9.1.1.13TimeTicksread-onlycurrent
tpNumNonTcpUdpActiveFlows
OBJECT-TYPE
Indicates the number of non TCP/UDP flows currently being handled by this traffic processor.
1.3.6.1.4.1.5655.4.1.9.1.1.14Unsigned32 (0..4294967295)read-onlycurrent
tpNumNonTcpUdpActiveFlowsPeak
OBJECT-TYPE
Indicates the peak value of tpNumNonTcpUdpActiveFlows since the last time it was cleared or the system started.
1.3.6.1.4.1.5655.4.1.9.1.1.15Unsigned32 (0..4294967295)read-onlycurrent
tpNumNonTcpUdpActiveFlowsPeakTime
OBJECT-TYPE
Indicates the time since the tpNumNonTcpUdpActiveFlowsPeak value occurred.
1.3.6.1.4.1.5655.4.1.9.1.1.16TimeTicksread-onlycurrent
tpTotalNumBlockedPackets
OBJECT-TYPE
Indicates the accumulated number of packets discarded by this traffic processor according to application blocking rules.
1.3.6.1.4.1.5655.4.1.9.1.1.17Unsigned32 (0..4294967295)read-onlycurrent
tpTotalNumBlockedFlows
OBJECT-TYPE
Indicates the accumulated number of flows discarded by this traffic processor according to application blocking rules.
1.3.6.1.4.1.5655.4.1.9.1.1.18Unsigned32 (0..4294967295)read-onlycurrent
tpTotalNumDiscardedPacketsDueToBwLimit
OBJECT-TYPE
Indicates the accumulated number of packets discarded by this traffic processor due to subscriber bandwidth limitations.
1.3.6.1.4.1.5655.4.1.9.1.1.19Unsigned32 (0..4294967295)read-onlycurrent
tpTotalNumWredDiscardedPackets
OBJECT-TYPE
Indicates the accumulated number of packets discarded by this traffic processor due to congestion in the queues.
1.3.6.1.4.1.5655.4.1.9.1.1.20Unsigned32 (0..4294967295)read-onlycurrent
tpTotalNumFragments
OBJECT-TYPE
Indicates the accumulated number of fragmented packets handled by this traffic processor.
1.3.6.1.4.1.5655.4.1.9.1.1.21Unsigned32 (0..4294967295)read-onlycurrent
tpTotalNumNonIpPackets
OBJECT-TYPE
Indicates the accumulated number of non IP packets handled by this traffic processor.
1.3.6.1.4.1.5655.4.1.9.1.1.22Unsigned32 (0..4294967295)read-onlycurrent
tpTotalNumIpCrcErrPackets
OBJECT-TYPE
Indicates the accumulated number of packets with IP CRC error handled by this traffic processor.
1.3.6.1.4.1.5655.4.1.9.1.1.23Unsigned32 (0..4294967295)read-onlycurrent
tpTotalNumIpLengthErrPackets
OBJECT-TYPE
Indicates the accumulated number of packets with IP length error handled by this traffic processor.
1.3.6.1.4.1.5655.4.1.9.1.1.24Unsigned32 (0..4294967295)read-onlycurrent
tpTotalNumIpBroadcastPackets
OBJECT-TYPE
Indicates the accumulated number of IP broadcast packets handled by this traffic processor.
1.3.6.1.4.1.5655.4.1.9.1.1.25Unsigned32 (0..4294967295)read-onlycurrent
tpTotalNumTtlErrPackets
OBJECT-TYPE
Indicates the accumulated number of packets with TTL error handled by this traffic processor.
1.3.6.1.4.1.5655.4.1.9.1.1.26Unsigned32 (0..4294967295)read-onlycurrent
tpTotalNumTcpUdpCrcErrPackets
OBJECT-TYPE
Indicates the accumulated number of TCP/UDP packets with CRC error handled by this traffic processor.
1.3.6.1.4.1.5655.4.1.9.1.1.27Unsigned32 (0..4294967295)read-onlycurrent
tpClearCountersTime
OBJECT-TYPE
Indicates the time since the traffic processor statistics counters were last cleared. Writing a 0 to this object causes the traffic processor counters to be cleared.
1.3.6.1.4.1.5655.4.1.9.1.1.28TimeTicksread-writecurrent
tpHandledPacketsRate
OBJECT-TYPE
Indicates the rate in packets per second of the packets handled by this traffic processor.
1.3.6.1.4.1.5655.4.1.9.1.1.29Unsigned32 (0..4294967295)read-onlycurrent
tpHandledPacketsRatePeak
OBJECT-TYPE
Indicates the peak value of tpHandledPacketsRate since the last time it was cleared or the system started.
1.3.6.1.4.1.5655.4.1.9.1.1.30Unsigned32 (0..4294967295)read-onlycurrent
tpHandledPacketsRatePeakTime
OBJECT-TYPE
Indicates the time since the tpHandledPacketsRatePeak value occurred.
1.3.6.1.4.1.5655.4.1.9.1.1.31TimeTicksread-onlycurrent
tpHandledFlowsRate
OBJECT-TYPE
Indicates the rate in flows opening per second of the flows handled by this traffic processor.
1.3.6.1.4.1.5655.4.1.9.1.1.32Unsigned32 (0..4294967295)read-onlycurrent
tpHandledFlowsRatePeak
OBJECT-TYPE
Indicates the peak value of tpHandledFlowsRate since the last time it was cleared or the system started.
1.3.6.1.4.1.5655.4.1.9.1.1.33Unsigned32 (0..4294967295)read-onlycurrent
tpHandledFlowsRatePeakTime
OBJECT-TYPE
Indicates the time since the tpHandledFlowsRatePeakTime value occurred.
1.3.6.1.4.1.5655.4.1.9.1.1.34TimeTicksread-onlycurrent
tpCpuUtilization
OBJECT-TYPE
Indicates the percentage of CPU utilization, updated once every 2 minutes.
1.3.6.1.4.1.5655.4.1.9.1.1.35Integer32 (0..100)read-onlycurrent
tpCpuUtilizationPeak
OBJECT-TYPE
Indicates the peak value of tpCpuUtilization since the last time it was cleared or the system started.
1.3.6.1.4.1.5655.4.1.9.1.1.36Integer32 (0..100)read-onlycurrent
tpCpuUtilizationPeakTime
OBJECT-TYPE
Indicates the time since the tpCpuUtilizationPeak value occurred.
1.3.6.1.4.1.5655.4.1.9.1.1.37TimeTicksread-onlycurrent
tpFlowsCapacityUtilization
OBJECT-TYPE
Indicates the percentage of flows capacity utilization.
1.3.6.1.4.1.5655.4.1.9.1.1.38Integer32 (0..100)read-onlycurrent
tpFlowsCapacityUtilizationPeak
OBJECT-TYPE
Indicates the peak value of tpFlowsCapacityUtilization since the last time it was cleared or the system started.
1.3.6.1.4.1.5655.4.1.9.1.1.39Integer32 (0..100)read-onlycurrent
tpFlowsCapacityUtilizationPeakTime
OBJECT-TYPE
Indicates the time since the tpFlowsCapacityUtilizationPeak value occurred.
1.3.6.1.4.1.5655.4.1.9.1.1.40TimeTicksread-onlycurrent
tpServiceLoss
OBJECT-TYPE
Indicates the relative amount of service loss in this traffic Processor, in units of 0.001%, since last reboot or last time this counter was cleared.
1.3.6.1.4.1.5655.4.1.9.1.1.41Integer32 (0..100000)read-onlycurrent
pportGrp
OBJECT-IDENTITY
1.3.6.1.4.1.5655.4.1.10
pportTable
OBJECT-TYPE
A list of port entries. The number of entries is determined by the number of modules in the chassis and the number of ports on each module.
1.3.6.1.4.1.5655.4.1.10.1not-accessiblecurrent
pportEntry
OBJECT-TYPE
Entry containing information for a particular port on a module.
1.3.6.1.4.1.5655.4.1.10.1.1not-accessiblecurrent
pportModuleIndex
OBJECT-TYPE
An index value that uniquely identifies the module where this port is located.
1.3.6.1.4.1.5655.4.1.10.1.1.1Integer32 (1..255)read-onlycurrent
pportIndex
OBJECT-TYPE
An index value that uniquely identifies this port within a module. The value is determined by the location of the port on the module. Valid entries are 1 to the value of moduleNumPorts for this module.
1.3.6.1.4.1.5655.4.1.10.1.1.2Integer32 (1..255)read-onlycurrent
pportType
OBJECT-TYPE
The type of physical layer medium dependent interface on the port.
1.3.6.1.4.1.5655.4.1.10.1.1.3INTEGER {other(1), e100BaseTX(11), e1000BaseT(15), e1000BaseSX(28)}read-onlycurrent
pportNumTxQueues
OBJECT-TYPE
The number of transmit queues supported by this port.
1.3.6.1.4.1.5655.4.1.10.1.1.4Integer32 (0..255)read-onlycurrent
pportIfIndex
OBJECT-TYPE
The value of the instance of the ifIndex object, defined in MIB-II, for this port.
1.3.6.1.4.1.5655.4.1.10.1.1.5Integer32 (0..255)read-onlycurrent
pportAdminSpeed
OBJECT-TYPE
The desired speed of the port. The current operational speed of the port can be determined from ifSpeed.
1.3.6.1.4.1.5655.4.1.10.1.1.6INTEGER {autoNegotiation(1), s10000000(10000000), s100000000(100000000), s1000000000(1000000000)}read-onlycurrent
pportAdminDuplex
OBJECT-TYPE
The desired duplex of the port.
1.3.6.1.4.1.5655.4.1.10.1.1.7INTEGER {half(1), full(2), auto(4)}read-onlycurrent
pportOperDuplex
OBJECT-TYPE
Indicates whether the port is operating in half-duplex or full-duplex.
1.3.6.1.4.1.5655.4.1.10.1.1.8INTEGER {half(1), full(2)}read-onlycurrent
pportLinkIndex
OBJECT-TYPE
Indicates the linkIndex of the link that this port belongs to. Value of 0 indicates that this port is not associated with any link. Value of -1 indicates that this port is associated to multiple links.
1.3.6.1.4.1.5655.4.1.10.1.1.9Integer32 (-1..255)read-onlycurrent
pportOperStatus
OBJECT-TYPE
Indicates the status of the port and if the port is down indicates the reason.
1.3.6.1.4.1.5655.4.1.10.1.1.10INTEGER {other(1), up(2), reflectionForcingDown(3), redundancyForcingDown(4), otherDown(5)}read-onlycurrent
txQueuesGrp
OBJECT-IDENTITY
1.3.6.1.4.1.5655.4.1.11
txQueuesTable
OBJECT-TYPE
This table consists of information on the SCE's transmit queues.
1.3.6.1.4.1.5655.4.1.11.1not-accessiblecurrent
txQueuesEntry
OBJECT-TYPE
A txQueuesTable entry.
1.3.6.1.4.1.5655.4.1.11.1.1not-accessiblecurrent
txQueuesModuleIndex
OBJECT-TYPE
An index value that uniquely identifies the module where this queue is located.
1.3.6.1.4.1.5655.4.1.11.1.1.1Integer32 (1..255)read-onlycurrent
txQueuesPortIndex
OBJECT-TYPE
An index value that uniquely identifies the port where this queue is located.
1.3.6.1.4.1.5655.4.1.11.1.1.2Integer32 (1..255)read-onlycurrent
txQueuesQueueIndex
OBJECT-TYPE
An index value that uniquely identifies this queue within a port. The value is determined by the location of the queue on the port. Valid entries are 1 to the value of portNumTxQueues for this module.
1.3.6.1.4.1.5655.4.1.11.1.1.3Integer32 (1..255)read-onlycurrent
txQueuesDescription
OBJECT-TYPE
Description of the transmit queue.
1.3.6.1.4.1.5655.4.1.11.1.1.4SnmpAdminStringread-onlycurrent
txQueuesBandwidth
OBJECT-TYPE
The bandwidth in L1 kbps configured for this queue.
1.3.6.1.4.1.5655.4.1.11.1.1.5Integer32 (1..1000000)read-onlycurrent
txQueuesUtilization
OBJECT-TYPE
The percentage of bandwidth utilization relative to the configured rate.
1.3.6.1.4.1.5655.4.1.11.1.1.6Integer32 (0..100)read-onlycurrent
txQueuesUtilizationPeak
OBJECT-TYPE
Indicates the peak value of txQueuesUtilization since the last time it was cleared or the system started.
1.3.6.1.4.1.5655.4.1.11.1.1.7Integer32 (0..100)read-onlycurrent
txQueuesUtilizationPeakTime
OBJECT-TYPE
Indicates the time since the txQueuesUtilizationPeak value occurred.
1.3.6.1.4.1.5655.4.1.11.1.1.8TimeTicksread-onlycurrent
txQueuesClearCountersTime
OBJECT-TYPE
Indicates the time since the TX queues statistics counters were last cleared. Writing a 0 to this object causes the TX queues counters to be cleared.
1.3.6.1.4.1.5655.4.1.11.1.1.9TimeTicksread-writecurrent
txQueuesDroppedBytes
OBJECT-TYPE
Amount of dropped L3 bytes. This is valid only if the system is configured to count dropped bytes per TX queue.
1.3.6.1.4.1.5655.4.1.11.1.1.10Counter64read-onlycurrent
globalControllersGrp
OBJECT-IDENTITY
1.3.6.1.4.1.5655.4.1.12
globalControllersTable
OBJECT-TYPE
This table consists of information on the SCE's Global Controllers. note: the globalControllersIndex and the SCE CLI configuration index have a offset of one i.e. 1 in the MIB refers to 0 in the CLI.
1.3.6.1.4.1.5655.4.1.12.1not-accessiblecurrent
globalControllersEntry
OBJECT-TYPE
A globalControllersTable entry.
1.3.6.1.4.1.5655.4.1.12.1.1not-accessiblecurrent
globalControllersModuleIndex
OBJECT-TYPE
An index value that uniquely identifies the module where this controller is located.
1.3.6.1.4.1.5655.4.1.12.1.1.1Integer32 (1..255)read-onlycurrent
globalControllersPortIndex
OBJECT-TYPE
An index value that uniquely identifies the port where this controller is located.
1.3.6.1.4.1.5655.4.1.12.1.1.2Integer32 (1..255)read-onlycurrent
globalControllersIndex
OBJECT-TYPE
An index value that uniquely identifies this controller within a port.
1.3.6.1.4.1.5655.4.1.12.1.1.3Integer32 (1..2147483647)read-onlycurrent
globalControllersDescription
OBJECT-TYPE
Description of the controller.
1.3.6.1.4.1.5655.4.1.12.1.1.4SnmpAdminStringread-onlycurrent
globalControllersBandwidth
OBJECT-TYPE
The L1 bandwidth configured for this controller.
1.3.6.1.4.1.5655.4.1.12.1.1.5Integer32 (1..1000000)read-onlycurrent
globalControllersUtilization
OBJECT-TYPE
The percentage of bandwidth utilization relative to the configured rate.
1.3.6.1.4.1.5655.4.1.12.1.1.6Integer32 (0..100)read-onlycurrent
globalControllersUtilizationPeak
OBJECT-TYPE
Indicates the peak value of globalControllersUtilization since the last time it was cleared or the system started.
1.3.6.1.4.1.5655.4.1.12.1.1.7Integer32 (0..100)read-onlycurrent
globalControllersUtilizationPeakTime
OBJECT-TYPE
Indicates the time since the globalControllersUtilizationPeak value occurred.
1.3.6.1.4.1.5655.4.1.12.1.1.8TimeTicksread-onlycurrent
globalControllersClearCountersTime
OBJECT-TYPE
Indicates the time since the controllers statistics counters were last cleared. Writing a 0 to this object causes the controllers counters to be cleared.
1.3.6.1.4.1.5655.4.1.12.1.1.9TimeTicksread-writecurrent
globalControllersDroppedBytes
OBJECT-TYPE
Amount of L3 dropped bytes. This is valid only if the system is configured to count dropped bytes per global controller.
1.3.6.1.4.1.5655.4.1.12.1.1.10Counter64read-onlycurrent
applicationGrp
OBJECT-IDENTITY
1.3.6.1.4.1.5655.4.1.13
appInfoTable
OBJECT-TYPE
This table consists of information on the SCE's application.
1.3.6.1.4.1.5655.4.1.13.1not-accessiblecurrent
appInfoEntry
OBJECT-TYPE
A appInfoTable entry.
1.3.6.1.4.1.5655.4.1.13.1.1not-accessiblecurrent
appName
OBJECT-TYPE
The application name.
1.3.6.1.4.1.5655.4.1.13.1.1.1SnmpAdminStringread-onlycurrent
appDescription
OBJECT-TYPE
The application description.
1.3.6.1.4.1.5655.4.1.13.1.1.2SnmpAdminStringread-onlycurrent
appVersion
OBJECT-TYPE
The application version.
1.3.6.1.4.1.5655.4.1.13.1.1.3SnmpAdminStringread-onlycurrent
appPropertiesTable
OBJECT-TYPE
The application properties table provides the list of properties available for the application. The table is cleared when the application is unloaded.
1.3.6.1.4.1.5655.4.1.13.2not-accessiblecurrent
appPropertiesEntry
OBJECT-TYPE
A appPropertiesTable entry.
1.3.6.1.4.1.5655.4.1.13.2.1not-accessiblecurrent
apIndex
OBJECT-TYPE
An index value that uniquely identify the property.
1.3.6.1.4.1.5655.4.1.13.2.1.1Integer32 (0..1000000)read-onlycurrent
apName
OBJECT-TYPE
Application property name. Property can be either scalar or array type.
1.3.6.1.4.1.5655.4.1.13.2.1.2SnmpAdminString (SIZE(1..128))read-onlycurrent
apType
OBJECT-TYPE
Application property type.
1.3.6.1.4.1.5655.4.1.13.2.1.3SnmpAdminStringread-onlycurrent
appPropertiesValueTable
OBJECT-TYPE
The applications properties value table is used to provide specific values for the applications properties. An entry must be created by setting the entry's apvRowStatus object with createAndGo (4) before setting the name of the property requested. To specify the property set the apvPropertyName objects. The apvPropertyName must be one of the properties from the appPropertiesTable. To remove an entry set the apvRowStatus object with destroy (6). To poll the application property, poll the apvPropertyStringValue, apvPropertyUintValue, or apvPropertyCounter64Value object. The table is cleared when the application is unloaded.
1.3.6.1.4.1.5655.4.1.13.3not-accessiblecurrent
appPropertiesValueEntry
OBJECT-TYPE
A appPropertiesValueTable entry.
1.3.6.1.4.1.5655.4.1.13.3.1not-accessiblecurrent
apvIndex
OBJECT-TYPE
Index to the table.
1.3.6.1.4.1.5655.4.1.13.3.1.1Integer32 (1..1024)not-accessiblecurrent
apvPropertyName
OBJECT-TYPE
A name that uniquely identifies the application property. Array type properties may be accessed each element at a time in C like format, e.g. x[1], or y[1][2].
1.3.6.1.4.1.5655.4.1.13.3.1.2SnmpAdminString (SIZE(1..128))read-createcurrent
apvRowStatus
OBJECT-TYPE
This object controls creation of a table entry.
1.3.6.1.4.1.5655.4.1.13.3.1.3RowStatusread-createcurrent
apvPropertyStringValue
OBJECT-TYPE
The value of the application property in display string format.
1.3.6.1.4.1.5655.4.1.13.3.1.4SnmpAdminString (SIZE(0..128))read-onlycurrent
apvPropertyUintValue
OBJECT-TYPE
The value of the application property in unsigned integer. If the property can't be casted to unsigned integer this object returns zero.
1.3.6.1.4.1.5655.4.1.13.3.1.5Unsigned32 (0..4294967295)read-onlycurrent
apvPropertyCounter64Value
OBJECT-TYPE
The value of the application property in Counter64 format. If the property can't be casted to Counter64, getting this object returns zero.
1.3.6.1.4.1.5655.4.1.13.3.1.6Counter64read-onlycurrent
trafficCountersGrp
OBJECT-IDENTITY
1.3.6.1.4.1.5655.4.1.14
trafficCountersTable
OBJECT-TYPE
The Traffic counters table provides information regarding the value of different the traffic counters.
1.3.6.1.4.1.5655.4.1.14.1not-accessiblecurrent
trafficCountersEntry
OBJECT-TYPE
Entry containing information about a traffic counter.
1.3.6.1.4.1.5655.4.1.14.1.1not-accessiblecurrent
trafficCounterIndex
OBJECT-TYPE
An index value that uniquely identifies the counter.
1.3.6.1.4.1.5655.4.1.14.1.1.1Integer32 (1..255)read-onlycurrent
trafficCounterValue
OBJECT-TYPE
A 64 bit counter value.
1.3.6.1.4.1.5655.4.1.14.1.1.2Counter64read-onlycurrent
trafficCounterName
OBJECT-TYPE
The name given to this counter.
1.3.6.1.4.1.5655.4.1.14.1.1.3SnmpAdminStringread-onlycurrent
trafficCounterType
OBJECT-TYPE
Defines whether there the traffic counters counts by 'packets(3)' or by 'bytes(2)'.
1.3.6.1.4.1.5655.4.1.14.1.1.4INTEGER {other(1), bytes(2), packets(3)}read-onlycurrent
attackGrp
OBJECT-IDENTITY
1.3.6.1.4.1.5655.4.1.15
attackTypeTable
OBJECT-TYPE
The Attack type table provides information regarding detected attacks, aggregated by attack type.
1.3.6.1.4.1.5655.4.1.15.1not-accessiblecurrent
attackTypeEntry
OBJECT-TYPE
Entry containing aggregated information about attacks of a given type.
1.3.6.1.4.1.5655.4.1.15.1.1not-accessiblecurrent
attackTypeIndex
OBJECT-TYPE
An index value that uniquely identifies the attack type.
1.3.6.1.4.1.5655.4.1.15.1.1.1Integer32 (1..255)read-onlycurrent
attackTypeName
OBJECT-TYPE
The name of this attack type.
1.3.6.1.4.1.5655.4.1.15.1.1.2SnmpAdminStringread-onlycurrent
attackTypeCurrentNumAttacks
OBJECT-TYPE
The current amount of attacks detected of this type.
1.3.6.1.4.1.5655.4.1.15.1.1.3Unsigned32 (0..4294967295)read-onlycurrent
attackTypeTotalNumAttacks
OBJECT-TYPE
The total amount of attacks detected of this type since last clear.
1.3.6.1.4.1.5655.4.1.15.1.1.4Unsigned32 (0..4294967295)read-onlycurrent
attackTypeTotalNumFlows
OBJECT-TYPE
The total amount of flows in attacks detected of this type since last clear.
1.3.6.1.4.1.5655.4.1.15.1.1.5Counter64read-onlycurrent
attackTypeTotalNumSeconds
OBJECT-TYPE
The total duration of attacks detected of this type since last clear.
1.3.6.1.4.1.5655.4.1.15.1.1.6Unsigned32 (0..4294967295)read-onlycurrent
vasTrafficForwardingGrp
OBJECT-IDENTITY
1.3.6.1.4.1.5655.4.1.16
vasServerTable
OBJECT-TYPE
The VAS server Table provides information on each VAS server operational status.
1.3.6.1.4.1.5655.4.1.16.1not-accessiblecurrent
vasServerEntry
OBJECT-TYPE
Entry containing information about VAS server status.
1.3.6.1.4.1.5655.4.1.16.1.1not-accessiblecurrent
vasServerIndex
OBJECT-TYPE
An index value that uniquely identifies a VAS server.
1.3.6.1.4.1.5655.4.1.16.1.1.1Integer32 (1..255)read-onlycurrent
vasServerId
OBJECT-TYPE
The ID of the VAS server.
1.3.6.1.4.1.5655.4.1.16.1.1.2Integer32 (0..255)read-onlycurrent
vasServerAdminStatus
OBJECT-TYPE
Indicates only the administrative status of the VAS sever, in order to activate a server it should be also configured with a VLAN and a group.
1.3.6.1.4.1.5655.4.1.16.1.1.3INTEGER {other(1), up(2), down(3)}read-onlycurrent
vasServerOperStatus
OBJECT-TYPE
Indicates the operational status of the VAS sever.
1.3.6.1.4.1.5655.4.1.16.1.1.4INTEGER {other(1), up(2), down(3)}read-onlycurrent
mplsVpnAutoLearnGrp
OBJECT-IDENTITY
1.3.6.1.4.1.5655.4.1.17
mplsVpnSoftwareCountersTable
OBJECT-TYPE
The MPLS VPN software counters table provides information on various system software counters related to MPLS VPN auto learn.
1.3.6.1.4.1.5655.4.1.17.1not-accessiblecurrent
mplsVpnSoftwareCountersEntry
OBJECT-TYPE
Entry containing information about MPLS VPN auto learn SW counters.
1.3.6.1.4.1.5655.4.1.17.1.1not-accessiblecurrent
mplsVpnMaxHWMappings
OBJECT-TYPE
The maximum number of MPLS VPN mappings supported by HW (including all kinds of mappings).
1.3.6.1.4.1.5655.4.1.17.1.1.1Integer32 (0..1000000)read-onlycurrent
mplsVpnCurrentHWMappings
OBJECT-TYPE
The current number of HW MPLS VPN mappings in use.
1.3.6.1.4.1.5655.4.1.17.1.1.2Integer32 (0..1000000)read-onlycurrent

Notifications

NameOIDStatus
operationalStatusOperationalTrap
NOTIFICATION-TYPE
OperationalStatusOperational notification signifies that the agent entity has detected the sysOperationalStatus object in this MIB has changed to 'operational(3)'.
1.3.6.1.4.1.5655.4.0.1current
operationalStatusWarningTrap
NOTIFICATION-TYPE
OperationalStatusWarning notification signifies that the agent entity has detected the sysOperationalStatus object in this MIB has changed to 'warning(4)'.
1.3.6.1.4.1.5655.4.0.2current
operationalStatusFailureTrap
NOTIFICATION-TYPE
OperationalStatusFailure notification signifies that the agent entity has detected the sysOperationalStatus object in this MIB has changed to 'failure(5)'.
1.3.6.1.4.1.5655.4.0.3current
systemResetTrap
NOTIFICATION-TYPE
A systemReset notification signifies that the agent entity is about to reset itself either per user's request or due to a fatal event.
1.3.6.1.4.1.5655.4.0.4current
chassisTempAlarmOnTrap
NOTIFICATION-TYPE
A chassisTempAlarmOn notification signifies that the agent entity has detected the chassisTempAlarm object in this MIB has changed to the 'on(3)' state (temperature is too high).
1.3.6.1.4.1.5655.4.0.5current
chassisTempAlarmOffTrap
NOTIFICATION-TYPE
A chassisTempAlarmOff notification signifies that the agent entity has detected the chassisTempAlarm object in this MIB has changed to the 'off(2)' state (temperature level is back to normal).
1.3.6.1.4.1.5655.4.0.6current
chassisVoltageAlarmOnTrap
NOTIFICATION-TYPE
A chassisVoltageAlarmOn notification signifies that the agent entity has detected the chassisVoltageAlarm object in this MIB has changed to the 'on(3)' state (voltage level is too high).
1.3.6.1.4.1.5655.4.0.7current
chassisFansAlarmOnTrap
NOTIFICATION-TYPE
A chassisFanStatusFailure notification signifies that the agent entity has detected the chassisFansAlarm object in this MIB has changed to the 'on(3)' state.
1.3.6.1.4.1.5655.4.0.8current
chassisPowerSupplyAlarmOnTrap
NOTIFICATION-TYPE
A chassisPsuStatusFailure notification signifies that the agent entity has detected the chassisPowerSupplyAlarm object in this MIB has changed to the 'on(3)' state.
1.3.6.1.4.1.5655.4.0.9current
rdrActiveConnectionTrap
NOTIFICATION-TYPE
RdrConnectionDestTypeActive notification signifies that the agent entity has detected the rdrFormatterDestStatus object in this MIB has changed to the 'active(2)' state.
1.3.6.1.4.1.5655.4.0.10current
rdrNoActiveConnectionTrap
NOTIFICATION-TYPE
A rdrNoActiveConnection notification signifies that the agent entity has detected there is no active connection between the RDR-formatter and any Data Collector.
1.3.6.1.4.1.5655.4.0.11current
rdrConnectionUpTrap
NOTIFICATION-TYPE
RdrConnectionStatusUp notification signifies that the agent entity has detected the rdrFormatterDestConnectionStatus object in this MIB has changed to 'up(2)'.
1.3.6.1.4.1.5655.4.0.12current
rdrConnectionDownTrap
NOTIFICATION-TYPE
RdrConnectionStatusDown notification signifies that the agent entity has detected the rdrFormatterDestConnectionStatus object in this MIB has changed to 'down(3)'.
1.3.6.1.4.1.5655.4.0.13current
telnetSessionStartedTrap
NOTIFICATION-TYPE
Replaced by the more generic sessionStartedTrap.
1.3.6.1.4.1.5655.4.0.14deprecated
telnetSessionEndedTrap
NOTIFICATION-TYPE
Replaced by the more generic sessionEndedTrap.
1.3.6.1.4.1.5655.4.0.15deprecated
telnetSessionDeniedAccessTrap
NOTIFICATION-TYPE
Replaced by the more generic sessionDeniedAccessTrap.
1.3.6.1.4.1.5655.4.0.16deprecated
telnetSessionBadLoginTrap
NOTIFICATION-TYPE
Replaced by the more generic sessionBadLoginTrap.
1.3.6.1.4.1.5655.4.0.17deprecated
loggerUserLogIsFullTrap
NOTIFICATION-TYPE
A loggerUserLogIsFull notification signifies that the agent entity has detected the User log file is full. In such case the agent entity rolls to the next file.
1.3.6.1.4.1.5655.4.0.18current
sntpClockDriftWarnTrap
NOTIFICATION-TYPE
An sntpClockDriftWarn notification signifies that the entity's SNTP agent did not receive time update for a long period, this may cause a time drift.
1.3.6.1.4.1.5655.4.0.19current
linkModeBypassTrap
NOTIFICATION-TYPE
A linkModeBypass notification signifies that the agent entity has detected that the linkOperMode object in this MIB has changed to 'bypass(2)'.
1.3.6.1.4.1.5655.4.0.20current
linkModeForwardingTrap
NOTIFICATION-TYPE
A linkModeForwarding notification signifies that the agent entity has detected that the linkOperMode object in this MIB has changed to 'forwarding(3)'.
1.3.6.1.4.1.5655.4.0.21current
linkModeCutoffTrap
NOTIFICATION-TYPE
A linkModeCutoff notification signifies that the agent entity has detected that the linkOperMode object in this MIB has changed to 'cutoff(4)'.
1.3.6.1.4.1.5655.4.0.22current
moduleAttackFilterActivatedTrap
NOTIFICATION-TYPE
A moduleAttackFilterActivated notification signifies that the agent entity's attack filter module has activated a filter. The pcubeSeEventGenericString1 is the type of attack-filter, which was activated.
1.3.6.1.4.1.5655.4.0.25current
moduleAttackFilterDeactivatedTrap
NOTIFICATION-TYPE
A portAttackFilterDeactivated notification signifies that the agent entity's attack filter module has removed a filter that was previously activated. The pcubeSeEventGenericString1 is the attack-filter type, which was sent in the corresponding moduleAttackFilterActivatedTrap. the pcubeSeEventGenericString2 is the reason for deactivating the filter.
1.3.6.1.4.1.5655.4.0.26current
moduleEmAgentGenericTrap
NOTIFICATION-TYPE
A generic notification used by the P-Cube EM agent. pcubeSeEventGenericString1 specifies what notification is it, and pcubeSeEventGenericString2 is the relevant parameter.
1.3.6.1.4.1.5655.4.0.27current
linkModeSniffingTrap
NOTIFICATION-TYPE
A linkModeSniffing notification signifies that the agent entity has detected that the linkOperMode object in this MIB has changed to 'sniffing(5)'.
1.3.6.1.4.1.5655.4.0.28current
moduleRedundancyReadyTrap
NOTIFICATION-TYPE
A moduleRedundancyReady notification signifies that the module was able to connect and synchronize with a redundant entity, and is now ready to handle fail-over if needed.
1.3.6.1.4.1.5655.4.0.29current
moduleRedundantConfigurationMismatchTrap
NOTIFICATION-TYPE
A moduleRedundantConfigurationMismatch notification signifies that the module was not able to synchronize with a redundant entity, due to a essential configuration parameters that are do not match between the module and the redundant entity.
1.3.6.1.4.1.5655.4.0.30current
moduleLostRedundancyTrap
NOTIFICATION-TYPE
A moduleLostRedundancy notification signifies that the module has lost the ability to perform the fail-over procedure.
1.3.6.1.4.1.5655.4.0.31current
moduleSmConnectionDownTrap
NOTIFICATION-TYPE
A moduleSmConnectionDown notification signifies that the module's virtual connection to the subscriber manager is broken.
1.3.6.1.4.1.5655.4.0.32current
moduleSmConnectionUpTrap
NOTIFICATION-TYPE
A moduleSmConnectionUp notification signifies that the module's virtual connection to the subscriber manager is up and working.
1.3.6.1.4.1.5655.4.0.33current
moduleOperStatusChangeTrap
NOTIFICATION-TYPE
A moduleOperStatusChangeTrap notification signifies that the moduleOperStatus has changed its value.
1.3.6.1.4.1.5655.4.0.34current
portOperStatusChangeTrap
NOTIFICATION-TYPE
A portOperStatusChangeTrap notification signifies that the portOperStatus object of the portIndex has changed its value, i.e., the link was forced down or the force down was released.
1.3.6.1.4.1.5655.4.0.35current
chassisLineFeedAlarmOnTrap
NOTIFICATION-TYPE
A chassisLineFeedAlarmOn notification signifies that the agent entity has detected the chassisLineFeed object in this MIB has changed to the 'on(3)' state.
1.3.6.1.4.1.5655.4.0.36current
rdrFormatterCategoryDiscardingReportsTrap
NOTIFICATION-TYPE
rdrCategoryDiscardingReportsTrap notification signifies that the agent entity has detected that reports send to this category are being discarded. The rdrFormatterCategoryNumReportsDiscarded object in this MIB is counting the amount of discarded reports.
1.3.6.1.4.1.5655.4.0.37current
rdrFormatterCategoryStoppedDiscardingReportsTrap
NOTIFICATION-TYPE
rdrCategoryStoppedDiscardingReportsTrap notification signifies that the agent entity has detected that reports send to this category are not being discarded any more. The rdrFormatterCategoryNumReportsDiscarded object in this MIB is counting the amount of discarded reports.
1.3.6.1.4.1.5655.4.0.38current
sessionStartedTrap
NOTIFICATION-TYPE
A sessionStarted notification signifies that the agent entity has accepted a new session. The pcubeSeEventGenericString1 is the session type (telnet/SSH) and client IP address.
1.3.6.1.4.1.5655.4.0.39current
sessionEndedTrap
NOTIFICATION-TYPE
A sessionEnded notification signifies that the agent entity has detected end of a session. The pcubeSeEventGenericString1 is the session type (telnet/SSH) and client IP address.
1.3.6.1.4.1.5655.4.0.40current
sessionDeniedAccessTrap
NOTIFICATION-TYPE
A sessionDeniedAccess notification signifies that the agent entity has refused a session from unauthorized source. The pcubeSeEventGenericString1 is the session type (telnet/SSH) and client IP address.
1.3.6.1.4.1.5655.4.0.41current
sessionBadLoginTrap
NOTIFICATION-TYPE
A sessionBadLogin notification signifies that the agent entity has detected attempt to login with a wrong password. The pcubeSeEventGenericString1 is the session type (telnet/SSH) and client IP address.
1.3.6.1.4.1.5655.4.0.42current
illegalSubscriberMappingTrap
NOTIFICATION-TYPE
A illegalSubscriberMappingTrap notification signifies that some external entity has attempted to create illegal or inconsistent subscriber mappings. The pcubeSeEventGenericString1 contains a message describing the problem.
1.3.6.1.4.1.5655.4.0.43current
loggerLineAttackLogFullTrap
NOTIFICATION-TYPE
Signifies that the agent entity has detected the line-attack log file is full. In such case the agent entity rolls to the next file.
1.3.6.1.4.1.5655.4.0.44current
vasServerOpertionalStatusChangeTrap
NOTIFICATION-TYPE
Signifies that the agent entity has detected that the vas server operational status has changed.
1.3.6.1.4.1.5655.4.0.45current
pullRequestRetryFailedTrap
NOTIFICATION-TYPE
Signifies that an unknown subscriber wasn't identified after a certain number of pull requests. The value of pcubeSeEventGenericString1 is the subscriber id and the pullRequestNumber is the number of pull requests made on this sub.
1.3.6.1.4.1.5655.4.0.47current
mplsVpnTotalHWMappingsThresholdExceededTrap
NOTIFICATION-TYPE
Sent when the value of mplsVpnCurrentHWMappings exceeds the allowed threshold.
1.3.6.1.4.1.5655.4.0.48current

Conformance

NameOIDStatus
pcubeSystemGroup
OBJECT-GROUP
System related inforamation.
1.3.6.1.4.1.5655.2.3.1.1.1current
pcubeChassisGroup
OBJECT-GROUP
Chassis related information.
1.3.6.1.4.1.5655.2.3.1.1.2current
pcuebModuleGroup
OBJECT-GROUP
Module related information.
1.3.6.1.4.1.5655.2.3.1.1.3current
pcubeLinkGroup
OBJECT-GROUP
Link related information.
1.3.6.1.4.1.5655.2.3.1.1.4current
pcubeDiskGroup
OBJECT-GROUP
Disk related information.
1.3.6.1.4.1.5655.2.3.1.1.5current
pcubeRdrFormatterGroup
OBJECT-GROUP
RDR-Formatter related information.
1.3.6.1.4.1.5655.2.3.1.1.6current
pcubeLoggerGroup
OBJECT-GROUP
Logger related information.
1.3.6.1.4.1.5655.2.3.1.1.7current
pcubeSubscribersGroup
OBJECT-GROUP
Subscriber related information.
1.3.6.1.4.1.5655.2.3.1.1.8current
pcubeTrafficProcessorGroup
OBJECT-GROUP
Traffic processors related information.
1.3.6.1.4.1.5655.2.3.1.1.9current
pcubePortGroup
OBJECT-GROUP
Ports related information.
1.3.6.1.4.1.5655.2.3.1.1.10current
pcubeTxQueuesGroup
OBJECT-GROUP
Tx queue related information
1.3.6.1.4.1.5655.2.3.1.1.11current
pcubeGlobalControllersGroup
OBJECT-GROUP
Global controllers related information.
1.3.6.1.4.1.5655.2.3.1.1.12current
pcubeApplicationGroup
OBJECT-GROUP
Application related information.
1.3.6.1.4.1.5655.2.3.1.1.13current
pcubeTrafficCountersGroup
OBJECT-GROUP
Traffic counter related information.
1.3.6.1.4.1.5655.2.3.1.1.14current
pcubeAttackGroup
OBJECT-GROUP
Attacks related information.
1.3.6.1.4.1.5655.2.3.1.1.15current
pcubeVasTrafficForwardingGroup
OBJECT-GROUP
VAS traffic forwarding related information.
1.3.6.1.4.1.5655.2.3.1.1.16current
pcubeMplsVpnAutoLearnGroup
OBJECT-GROUP
MPLS VPN auto learning related information.
1.3.6.1.4.1.5655.2.3.1.1.17current
pcubeTrapObjectsGroup
OBJECT-GROUP
Notifications' objects group.
1.3.6.1.4.1.5655.2.3.1.1.18current
pcubeCompliance
MODULE-COMPLIANCE
A compliance statement defined in this MIB module, for SCE SNMP agents. with old deprectated groups. This compliance includes deprecated groups.
1.3.6.1.4.1.5655.2.3.1.2.1deprecated
pcubeComplianceRev1
MODULE-COMPLIANCE
A compliance statement defined in this MIB module, for SCE SNMP agents.
1.3.6.1.4.1.5655.2.3.1.2.2current
pcubeSeEventsGroup
NOTIFICATION-GROUP
Pcube notifications. Contains deprecated objects.
1.3.6.1.4.1.5655.2.3.1.3deprecated
pcubeSeEventsGroupRev1
NOTIFICATION-GROUP
Pcube notifications.
1.3.6.1.4.1.5655.2.3.1.4current