PBN-MIB
- Registered at
- 1.3.6.1.4.1.11606
- Namespace
- pbn
- Source file
PBN-MIB- Digest
sha256:1e545fd81b63f5dab2d76d2476c32c6390bdb5beef54da7708ba1a5f7d9ec73b
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Opaque, TRAP-TYPE, enterprises, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
PBN-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| TypeAGCStatus type | ||||
| TypeGainMode type | ||||
| TypeOnOff type | ||||
| TypePowerSupply type | ||||
| TypeTamper type | ||||
| TypeYesNo type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| pbn OBJECT-IDENTITY | 1.3.6.1.4.1.11606 | |||
| pbnTrap OBJECT-IDENTITY | 1.3.6.1.4.1.11606.0 | |||
| ocm OBJECT-IDENTITY | 1.3.6.1.4.1.11606.1 | |||
| pbnDevice OBJECT-TYPE PBN Networks Management Devices | 1.3.6.1.4.1.11606.1.1 | INTEGER (1 | 2 | 30) | read-only | mandatory |
| deviceAddress OBJECT-TYPE PBN Networks Management Device Address | 1.3.6.1.4.1.11606.1.2 | INTEGER (0..255) | read-write | mandatory |
| ocmSlot OBJECT-TYPE The OCM slot of the PBN device | 1.3.6.1.4.1.11606.1.3 | INTEGER (0..8) | read-write | mandatory |
| ocmPage OBJECT-TYPE The Device Page | 1.3.6.1.4.1.11606.1.4 | INTEGER (0..7) | read-write | mandatory |
| ocmParam OBJECT-TYPE The Device Parameter | 1.3.6.1.4.1.11606.1.5 | INTEGER (0..31) | read-write | mandatory |
| ocmParamStatus OBJECT-TYPE The parameter status | 1.3.6.1.4.1.11606.1.6 | INTEGER (0..3) | read-only | mandatory |
| ocmParamString OBJECT-TYPE The parameter string | 1.3.6.1.4.1.11606.1.7 | DisplayString | read-only | mandatory |
| ocmWriteParameterValue OBJECT-TYPE The Write Parameter Value ID | 1.3.6.1.4.1.11606.1.8 | INTEGER | read-write | mandatory |
| ocmToggleParameterValue OBJECT-TYPE The Toggle Parameter Value ID | 1.3.6.1.4.1.11606.1.9 | INTEGER | read-write | mandatory |
| ocmReadParameterValue OBJECT-TYPE The Toggle Parameter Value ID | 1.3.6.1.4.1.11606.1.10 | INTEGER | read-only | mandatory |
| cpon100 OBJECT-IDENTITY | 1.3.6.1.4.1.11606.2 | |||
| cpon100Trap OBJECT-IDENTITY | 1.3.6.1.4.1.11606.2.0 | |||
| catvCtrl OBJECT-TYPE CATV Service Control | 1.3.6.1.4.1.11606.2.1 | INTEGER (0..1) | read-write | mandatory |
| masterAlarmStatus OBJECT-TYPE Master Alarm Status | 1.3.6.1.4.1.11606.2.2 | INTEGER (0..1) | read-only | obsolete |
| contactInput OBJECT-TYPE Tamper Status | 1.3.6.1.4.1.11606.2.3 | INTEGER (0..1) | read-only | mandatory |
| catvStatus OBJECT-TYPE CATV Service Status | 1.3.6.1.4.1.11606.2.4 | INTEGER (0..3) | read-only | mandatory |
| sensingInput OBJECT-TYPE Sensing Input | 1.3.6.1.4.1.11606.2.5 | INTEGER (0..1) | read-only | mandatory |
| globalPktSize OBJECT-TYPE Packet Size | 1.3.6.1.4.1.11606.2.6 | INTEGER (0..2) | read-write | mandatory |
| globalMulticastStormProtection OBJECT-TYPE Multicast Storm Protection | 1.3.6.1.4.1.11606.2.7 | INTEGER (0..1) | read-write | mandatory |
| globalFlowCtrl OBJECT-TYPE Flow Control | 1.3.6.1.4.1.11606.2.8 | INTEGER (0..3) | read-write | mandatory |
| globalBackPressureMode OBJECT-TYPE Back Pressure Mode | 1.3.6.1.4.1.11606.2.9 | INTEGER (0..1) | read-write | mandatory |
| globalPriorityBufferReserve OBJECT-TYPE Priority Buffer Reserve | 1.3.6.1.4.1.11606.2.10 | INTEGER (0..1) | read-write | mandatory |
| globalPriorityScheme OBJECT-TYPE Priority Scheme Select | 1.3.6.1.4.1.11606.2.11 | INTEGER (0..3) | read-write | mandatory |
| global802dot1PBasedPriority OBJECT-TYPE 802.1p Based priority | 1.3.6.1.4.1.11606.2.12 | INTEGER (0..7) | read-write | mandatory |
| global802dot1qVLANEnable OBJECT-TYPE 802.1q VLAN enable | 1.3.6.1.4.1.11606.2.13 | INTEGER (0..1) | read-write | mandatory |
| globalNullVIDReplacement OBJECT-TYPE Null VID Replacement | 1.3.6.1.4.1.11606.2.14 | INTEGER (0..1) | read-write | mandatory |
| sourceMACPauseCtrl OBJECT-TYPE Source Address MAC Pause | 1.3.6.1.4.1.11606.2.15 | Opaque (SIZE(6)) | read-write | mandatory |
| globalFastAge OBJECT-TYPE Fast Age | 1.3.6.1.4.1.11606.2.16 | INTEGER (0..1) | read-write | mandatory |
| cpon100MACAddr OBJECT-TYPE CPON-100 SNMP MAC Address | 1.3.6.1.4.1.11606.2.17 | OCTET STRING (SIZE(0..5)) | read-only | mandatory |
| cpon100TrapStatus OBJECT-TYPE CPON-100 Trap severity | 1.3.6.1.4.1.11606.2.18 | INTEGER (0..2) | read-only | mandatory |
| cpon100TrapMsg OBJECT-TYPE CPON-100 Trap Message | 1.3.6.1.4.1.11606.2.19 | DisplayString (SIZE(0..63)) | read-only | mandatory |
| vlanTable OBJECT-IDENTITY | 1.3.6.1.4.1.11606.2.21 | |||
| vlanAddr1 OBJECT-TYPE CPON-100-100 VLAN1 | 1.3.6.1.4.1.11606.2.21.1 | INTEGER (0..16777215) | read-write | mandatory |
| vlanAddr2 OBJECT-TYPE CPON-100 VLAN2 | 1.3.6.1.4.1.11606.2.21.2 | INTEGER (0..16777215) | read-write | mandatory |
| vlanAddr3 OBJECT-TYPE CPON-100 VLAN3 | 1.3.6.1.4.1.11606.2.21.3 | INTEGER (0..16777215) | read-write | mandatory |
| staticMACTable OBJECT-IDENTITY | 1.3.6.1.4.1.11606.2.22 | |||
| staticMAC1 OBJECT-TYPE Static MAC entry 1 | 1.3.6.1.4.1.11606.2.22.1 | Opaque (SIZE(8)) | read-write | mandatory |
| staticMAC2 OBJECT-TYPE Static MAC entry 2 | 1.3.6.1.4.1.11606.2.22.2 | Opaque (SIZE(8)) | read-write | mandatory |
| staticMAC3 OBJECT-TYPE Static MAC entry 3 | 1.3.6.1.4.1.11606.2.22.3 | Opaque (SIZE(8)) | read-write | mandatory |
| staticMAC4 OBJECT-TYPE Static MAC entry 4 | 1.3.6.1.4.1.11606.2.22.4 | Opaque (SIZE(8)) | read-write | mandatory |
| staticMAC5 OBJECT-TYPE Static MAC entry 5 | 1.3.6.1.4.1.11606.2.22.5 | Opaque (SIZE(8)) | read-write | mandatory |
| dynamicMACTable OBJECT-IDENTITY | 1.3.6.1.4.1.11606.2.23 | |||
| macEntryCnt OBJECT-TYPE Dynamic MAC Entry Count | 1.3.6.1.4.1.11606.2.23.1 | INTEGER (0..1024) | read-only | mandatory |
| macEntryID OBJECT-TYPE Dynamic MAC Entry ID | 1.3.6.1.4.1.11606.2.23.2 | INTEGER (0..1024) | read-write | mandatory |
| macEntry OBJECT-TYPE Dynamic MAC entry data | 1.3.6.1.4.1.11606.2.23.3 | Opaque (SIZE(8)) | read-only | mandatory |
| cpon100Port1 OBJECT-IDENTITY | 1.3.6.1.4.1.11606.2.24 | |||
| port1LinkStatus OBJECT-TYPE Port1 Link Status | 1.3.6.1.4.1.11606.2.24.1 | INTEGER (0..1) | read-only | mandatory |
| port1MDIXStatus OBJECT-TYPE Port1 MID-X Status | 1.3.6.1.4.1.11606.2.24.2 | INTEGER (0..1) | read-only | mandatory |
| port1AutoNegotiationStatus OBJECT-TYPE Port1 Auto-Negotiation Status | 1.3.6.1.4.1.11606.2.24.3 | INTEGER (0..1) | read-only | mandatory |
| port1LinkCapability OBJECT-TYPE Link Capability | 1.3.6.1.4.1.11606.2.24.4 | INTEGER (0..15) | read-only | mandatory |
| port1FlowCtrlCapability OBJECT-TYPE Port1 Flow Control Capability | 1.3.6.1.4.1.11606.2.24.5 | INTEGER (0..1) | read-only | mandatory |
| port1FarEndFaultStatus OBJECT-TYPE Port1 Far End Fault Status | 1.3.6.1.4.1.11606.2.24.6 | INTEGER (0..1) | read-only | mandatory |
| port1RxLoPriorityByte OBJECT-TYPE Port1 Receive Low Priority Octet Counter | 1.3.6.1.4.1.11606.2.24.7 | Counter | read-only | mandatory |
| port1RxHiPriorityByte OBJECT-TYPE Port1 Receive High Priority Octet Counter | 1.3.6.1.4.1.11606.2.24.8 | Counter | read-only | mandatory |
| port1UndersizePkt OBJECT-TYPE Port1 Undersize Packet Counter | 1.3.6.1.4.1.11606.2.24.9 | Counter | read-only | mandatory |
| port1RxJabbers OBJECT-TYPE Port1 Receive Jabbers Counter | 1.3.6.1.4.1.11606.2.24.12 | Counter | read-only | mandatory |
| port1CRCError OBJECT-TYPE Port1 CRC Error Counter | 1.3.6.1.4.1.11606.2.24.14 | Counter | read-only | mandatory |
| port1RxPausePkts OBJECT-TYPE Port1 Receive Pause Packet Counter | 1.3.6.1.4.1.11606.2.24.17 | Counter | read-only | mandatory |
| port1Broadcast OBJECT-TYPE Port1 Good Broadcast Packet counter | 1.3.6.1.4.1.11606.2.24.18 | Counter | read-only | mandatory |
| port1RxMulticast OBJECT-TYPE Port1 Receive Good Multicast Packet Counter | 1.3.6.1.4.1.11606.2.24.19 | Counter | read-only | mandatory |
| port1RxUnicast OBJECT-TYPE Port1 Receive Unicast Counter | 1.3.6.1.4.1.11606.2.24.20 | Counter | read-only | mandatory |
| port1Rx64Octets OBJECT-TYPE Port1 Receive 64Octets Counter | 1.3.6.1.4.1.11606.2.24.21 | Counter | read-only | mandatory |
| port1Rx65to127Octets OBJECT-TYPE Port1 Receive 65 to 127 Octets Counter | 1.3.6.1.4.1.11606.2.24.22 | Counter | read-only | mandatory |
| port1Rx128to255Octets OBJECT-TYPE Port1 Receive 128 to 255 Octets Counter | 1.3.6.1.4.1.11606.2.24.23 | Counter | read-only | mandatory |
| port1Rx256to511Octets OBJECT-TYPE Port1 Receive 256 to 511 Octets Counter | 1.3.6.1.4.1.11606.2.24.24 | Counter | read-only | mandatory |
| port1Rx512to1023Octets OBJECT-TYPE Port1 Receive 512 to 1023 Octets Counter | 1.3.6.1.4.1.11606.2.24.25 | Counter | read-only | mandatory |
| port1Rx1024to1522Octets OBJECT-TYPE Port1 Receive 1024 to 1522 Octets Counter | 1.3.6.1.4.1.11606.2.24.26 | Counter | read-only | mandatory |
| port1TxLoPriorityByte OBJECT-TYPE Port1 Transmit Low Priority Good Octet Counter | 1.3.6.1.4.1.11606.2.24.27 | Counter | read-only | mandatory |
| port1TxHiPriorityByte OBJECT-TYPE Port1 Transmit High Priority Good Octet Counter | 1.3.6.1.4.1.11606.2.24.28 | Counter | read-only | mandatory |
| port1PausePkts OBJECT-TYPE Port1 Pause Packet Counter | 1.3.6.1.4.1.11606.2.24.30 | Counter | read-only | mandatory |
| port1TxBroadcastPkts OBJECT-TYPE Port1 Transmit Good Broadcast Packet Counter | 1.3.6.1.4.1.11606.2.24.31 | Counter | read-only | mandatory |
| port1TxMulticastPkts OBJECT-TYPE Port1 Transmit Good Multicast Packet Counter | 1.3.6.1.4.1.11606.2.24.32 | Counter | read-only | mandatory |
| port1TxUnicastPkts OBJECT-TYPE Port1 Transmit Good Unicast Packet Counter | 1.3.6.1.4.1.11606.2.24.33 | Counter | read-only | mandatory |
| port1TxTotalCollision OBJECT-TYPE Port1 Transmit Total Collision Packet Counter for half-duplex only | 1.3.6.1.4.1.11606.2.24.35 | Counter | read-only | mandatory |
| port1TxDroppedPkts OBJECT-TYPE Port1 Transmit Drop Packet Counter | 1.3.6.1.4.1.11606.2.24.39 | Counter | read-only | mandatory |
| port1RxDroppedPkts OBJECT-TYPE Port1 Receive Drop Packet Counter | 1.3.6.1.4.1.11606.2.24.40 | Counter | read-only | mandatory |
| cpon100Port1Ctrl OBJECT-IDENTITY | 1.3.6.1.4.1.11606.2.24.45 | |||
| port1CtrlDiffServPriority OBJECT-TYPE Port1 DiffServe Priority Control | 1.3.6.1.4.1.11606.2.24.45.1 | INTEGER (0..1) | read-write | mandatory |
| port1Ctrl802dot1pPriorityClass OBJECT-TYPE Port1 802.1p Priority Class Enable | 1.3.6.1.4.1.11606.2.24.45.2 | INTEGER (0..1) | read-write | mandatory |
| port1CtrlPortBasedPriority OBJECT-TYPE Port1 Port Based Priority | 1.3.6.1.4.1.11606.2.24.45.3 | INTEGER (0..1) | read-write | mandatory |
| port1CtrlPriorityCtrl OBJECT-TYPE Port1 Priority Enable | 1.3.6.1.4.1.11606.2.24.45.4 | INTEGER (0..1) | read-write | mandatory |
| port1CtrlAutoNegotiation OBJECT-TYPE Port1 Auto-Negotiation Enable | 1.3.6.1.4.1.11606.2.24.45.5 | INTEGER (0..1) | read-write | mandatory |
| port1CtrlForceFullDuplex OBJECT-TYPE Port1 Force Full-duplex | 1.3.6.1.4.1.11606.2.24.45.6 | INTEGER (0..1) | read-write | mandatory |
| port1CtrlBroadcastStormProtection OBJECT-TYPE Port1 Broadcast Storm Protection | 1.3.6.1.4.1.11606.2.24.45.7 | INTEGER (0..1) | read-write | mandatory |
| port1CtrlForceFlowCtrl OBJECT-TYPE Port1 Force Flow Control | 1.3.6.1.4.1.11606.2.24.45.8 | INTEGER (0..1) | read-write | mandatory |
| port1CtrlBackPressure OBJECT-TYPE Port1 Backpressure Enable | 1.3.6.1.4.1.11606.2.24.45.9 | INTEGER (0..1) | read-write | mandatory |
| port1CtrlTxEnable OBJECT-TYPE Port1 Transmit Enable | 1.3.6.1.4.1.11606.2.24.45.10 | INTEGER (0..1) | read-write | mandatory |
| port1CtrlRxEnable OBJECT-TYPE Port1 Receive Enable | 1.3.6.1.4.1.11606.2.24.45.11 | INTEGER (0..1) | read-write | mandatory |
| port1CtrlPowerDown OBJECT-TYPE Port1 Port Powerdown | 1.3.6.1.4.1.11606.2.24.45.12 | INTEGER (0..1) | read-write | mandatory |
| port1CtrlMACLoopBackTest OBJECT-TYPE Port1 MAC Loopback Test | 1.3.6.1.4.1.11606.2.24.45.13 | INTEGER (0..1) | read-write | mandatory |
| port1CtrlPHYLoopbackTest OBJECT-TYPE Port1 PHY Loopback Test | 1.3.6.1.4.1.11606.2.24.45.14 | INTEGER (0..1) | read-write | mandatory |
| port1CtrlRemoteLoopbackTest OBJECT-TYPE Port1 Remote Loopback Test | 1.3.6.1.4.1.11606.2.24.45.15 | INTEGER (0..1) | read-write | mandatory |
| port1CtrlTagInsertionRemoval OBJECT-TYPE Port1 Tag Insertion/Tag Removal | 1.3.6.1.4.1.11606.2.24.45.16 | INTEGER (0..3) | read-write | mandatory |
| port1CtrlPortMembership OBJECT-TYPE Port1 Port Membership | 1.3.6.1.4.1.11606.2.24.45.17 | INTEGER (0..31) | read-write | mandatory |
| port1CtrlIngressVLANFiltering OBJECT-TYPE Port1 Ingress VLAN Filtering | 1.3.6.1.4.1.11606.2.24.45.18 | INTEGER (0..1) | read-write | mandatory |
| port1CtrlDiscardNon_PVIDPkt OBJECT-TYPE Port1 Discard Non-PVID Packet | 1.3.6.1.4.1.11606.2.24.45.19 | INTEGER (0..1) | read-write | mandatory |
| port1CtrlDefaultTag OBJECT-TYPE Port1 Default Tag | 1.3.6.1.4.1.11606.2.24.45.20 | INTEGER (0..65536) | read-write | mandatory |
| port1CtrlForceSpeed OBJECT-TYPE Port1 Force Speed | 1.3.6.1.4.1.11606.2.24.45.21 | INTEGER (0..1) | read-write | mandatory |
| cpon100Port2 OBJECT-IDENTITY | 1.3.6.1.4.1.11606.2.25 | |||
| port2LinkStatus OBJECT-TYPE Port2 Link Status | 1.3.6.1.4.1.11606.2.25.1 | INTEGER (0..1) | read-only | mandatory |
| port2MDIXStatus OBJECT-TYPE Port2 MDI-X Status | 1.3.6.1.4.1.11606.2.25.2 | INTEGER (0..1) | read-only | mandatory |
| port2AutoNegotiationStatus OBJECT-TYPE Port2 Auto-Negotiation Status | 1.3.6.1.4.1.11606.2.25.3 | INTEGER (0..1) | read-only | mandatory |
| port2LinkCapability OBJECT-TYPE Port2 Link Capability | 1.3.6.1.4.1.11606.2.25.4 | INTEGER (0..15) | read-only | mandatory |
| port2FlowCtrlCapability OBJECT-TYPE Port2 Flow Control Capability | 1.3.6.1.4.1.11606.2.25.5 | INTEGER (0..1) | read-only | mandatory |
| port2FarEndFaultStatus OBJECT-TYPE Port2 Far End Fault Status | 1.3.6.1.4.1.11606.2.25.6 | INTEGER (0..1) | read-only | mandatory |
| port2RxLoPriorityByte OBJECT-TYPE Port2 Receive Low Priority Octet Counter | 1.3.6.1.4.1.11606.2.25.7 | Counter | read-only | mandatory |
| port2RxHiPriorityByte OBJECT-TYPE Port2 Receive High Priority Octet Counter | 1.3.6.1.4.1.11606.2.25.8 | Counter | read-only | mandatory |
| port2UndersizePkt OBJECT-TYPE Port2 Undersize Packet Counter | 1.3.6.1.4.1.11606.2.25.9 | Counter | read-only | mandatory |
| port2RxJabbers OBJECT-TYPE Port2 Receive Jabbers Counter | 1.3.6.1.4.1.11606.2.25.12 | Counter | read-only | mandatory |
| port2CRCError OBJECT-TYPE Port2 CRC Error Counter | 1.3.6.1.4.1.11606.2.25.14 | Counter | read-only | mandatory |
| port2RxPausePkts OBJECT-TYPE Port2 Receive Pause Packet Counter | 1.3.6.1.4.1.11606.2.25.17 | Counter | read-only | mandatory |
| port2Broadcast OBJECT-TYPE Port2 Broadcast Good Packet Counter | 1.3.6.1.4.1.11606.2.25.18 | Counter | read-only | mandatory |
| port2RxMulticast OBJECT-TYPE Port2 Receive Multicast Good Packet Counter | 1.3.6.1.4.1.11606.2.25.19 | Counter | read-only | mandatory |
| port2RxUnicast OBJECT-TYPE Port2 Receive Unicast Counter | 1.3.6.1.4.1.11606.2.25.20 | Counter | read-only | mandatory |
| port2Rx64Octets OBJECT-TYPE Port2 Receive 64 Octets Counter | 1.3.6.1.4.1.11606.2.25.21 | Counter | read-only | mandatory |
| port2Rx65to127Octets OBJECT-TYPE Port2 Receive 65 to 127 Octets Counter | 1.3.6.1.4.1.11606.2.25.22 | Counter | read-only | mandatory |
| port2Rx128to255Octets OBJECT-TYPE Port2 Receive 128 to 255 Octets Counter | 1.3.6.1.4.1.11606.2.25.23 | Counter | read-only | mandatory |
| port2Rx256to511Octets OBJECT-TYPE Port2 Receive 256 to 511 Octets Counter | 1.3.6.1.4.1.11606.2.25.24 | Counter | read-only | mandatory |
| port2Rx512to1023Octets OBJECT-TYPE Port2 Receive 512 to 1023 Octets Counter | 1.3.6.1.4.1.11606.2.25.25 | Counter | read-only | mandatory |
| port2Rx1024to1522Octets OBJECT-TYPE Port2 Receive 1024 to 1522 Octets Counter | 1.3.6.1.4.1.11606.2.25.26 | Counter | read-only | mandatory |
| port2TxLoPriorityByte OBJECT-TYPE Port2 Transmit Low Priority Packet Counter | 1.3.6.1.4.1.11606.2.25.27 | Counter | read-only | mandatory |
| port2TxHiPriorityByte OBJECT-TYPE Port2 Transmit High Priority Packet Counter | 1.3.6.1.4.1.11606.2.25.28 | Counter | read-only | mandatory |
| port2PausePkts OBJECT-TYPE Port2 Pause Packet Counter | 1.3.6.1.4.1.11606.2.25.30 | Counter | read-only | mandatory |
| port2TxBroadcastPkts OBJECT-TYPE Port2 Transmit Broadcast Packet Counter | 1.3.6.1.4.1.11606.2.25.31 | Counter | read-only | mandatory |
| port2TxMulticastPkts OBJECT-TYPE Port2 Transmit Multicast Packet Counter | 1.3.6.1.4.1.11606.2.25.32 | Counter | read-only | mandatory |
| port2TxUnicastPkts OBJECT-TYPE Port2 Transmit Unicast Packet Counter | 1.3.6.1.4.1.11606.2.25.33 | Counter | read-only | mandatory |
| port2TxTotalCollision OBJECT-TYPE Port2 Transmit Total Collision Packet Counter | 1.3.6.1.4.1.11606.2.25.35 | Counter | read-only | mandatory |
| port2TxDroppedPkts OBJECT-TYPE Port2 Transmit Dropped Packet Counter | 1.3.6.1.4.1.11606.2.25.39 | Counter | read-only | mandatory |
| port2RxDroppedPkts OBJECT-TYPE Port2 Receive Dropped Packet Counter | 1.3.6.1.4.1.11606.2.25.40 | Counter | read-only | mandatory |
| port2Ctrl OBJECT-IDENTITY | 1.3.6.1.4.1.11606.2.25.45 | |||
| port2CtrlDiffServPriority OBJECT-TYPE Port2 DiffServe Priority Control | 1.3.6.1.4.1.11606.2.25.45.1 | INTEGER (0..1) | read-write | mandatory |
| port2Ctrl802dot1pPriorityClass OBJECT-TYPE Port2 802.1p Priority Class Enable | 1.3.6.1.4.1.11606.2.25.45.2 | INTEGER (0..1) | read-write | mandatory |
| port2CtrlPortBasedPriority OBJECT-TYPE Port2 802.1p Priority Class Enable | 1.3.6.1.4.1.11606.2.25.45.3 | INTEGER (0..1) | read-write | mandatory |
| port2CtrlPriorityCtrl OBJECT-TYPE Port2 Priority Enable | 1.3.6.1.4.1.11606.2.25.45.4 | INTEGER (0..1) | read-write | mandatory |
| port2CtrlAutoNegotiation OBJECT-TYPE Port2 Auto-Negotiation Enable | 1.3.6.1.4.1.11606.2.25.45.5 | INTEGER (0..1) | read-write | mandatory |
| port2CtrlForcedFullDuplex OBJECT-TYPE Port2 Force Full-duplex | 1.3.6.1.4.1.11606.2.25.45.6 | INTEGER (0..1) | read-write | mandatory |
| port2CtrlBroadcastStormProtection OBJECT-TYPE Port2 Broadcast Storm Protection Enable | 1.3.6.1.4.1.11606.2.25.45.7 | INTEGER (0..1) | read-write | mandatory |
| port2CtrlForceFlowCtrl OBJECT-TYPE Port2 Force Flow Control | 1.3.6.1.4.1.11606.2.25.45.8 | INTEGER (0..1) | read-write | mandatory |
| port2CtrlBackPressure OBJECT-TYPE Port2 Back Pressure Enable | 1.3.6.1.4.1.11606.2.25.45.9 | INTEGER (0..1) | read-write | mandatory |
| port2CtrlTxEnable OBJECT-TYPE Port2 Transmit Enable | 1.3.6.1.4.1.11606.2.25.45.10 | INTEGER (0..1) | read-write | mandatory |
| port2CtrlRxEnable OBJECT-TYPE Port2 Receive Enable | 1.3.6.1.4.1.11606.2.25.45.11 | INTEGER (0..1) | read-write | mandatory |
| port2CtrlPowerDown OBJECT-TYPE Port2 Powerdown | 1.3.6.1.4.1.11606.2.25.45.12 | INTEGER (0..1) | read-write | mandatory |
| port2CtrlMACLoopBackTest OBJECT-TYPE Port2 MAC Loopback Test | 1.3.6.1.4.1.11606.2.25.45.13 | INTEGER (0..1) | read-write | mandatory |
| port2CtrlPHYLoopbackTest OBJECT-TYPE Port2 PHY Loopback Test | 1.3.6.1.4.1.11606.2.25.45.14 | INTEGER (0..1) | read-write | mandatory |
| port2CtrlRemoteLoopbackTest OBJECT-TYPE Port2 Remote Loopback Test | 1.3.6.1.4.1.11606.2.25.45.15 | INTEGER (0..1) | read-write | mandatory |
| port2CtrlTagInsertionRemoval OBJECT-TYPE Port2 Tag Insertion/Tag Removal | 1.3.6.1.4.1.11606.2.25.45.16 | INTEGER (0..3) | read-write | mandatory |
| port2CtrlPortMembership OBJECT-TYPE Port2 Port Membership | 1.3.6.1.4.1.11606.2.25.45.17 | INTEGER (0..31) | read-write | mandatory |
| port2CtrlIngressVLANFiltering OBJECT-TYPE Port2 Ingress VLAN Filtering | 1.3.6.1.4.1.11606.2.25.45.18 | INTEGER (0..1) | read-write | mandatory |
| port2CtrlDiscardNon_PVIDPkt OBJECT-TYPE Port2 Discard Non-PVID Packet | 1.3.6.1.4.1.11606.2.25.45.19 | INTEGER (0..1) | read-write | mandatory |
| port2CtrlDefaultTag OBJECT-TYPE Port2 Default Tag | 1.3.6.1.4.1.11606.2.25.45.20 | INTEGER (0..65536) | read-write | mandatory |
| port2CtrlForceSpeed OBJECT-TYPE Port2 Force Speed | 1.3.6.1.4.1.11606.2.25.45.21 | INTEGER (0..1) | read-write | mandatory |
| cpon100PriUplink OBJECT-IDENTITY | 1.3.6.1.4.1.11606.2.26 | |||
| priUplinkLinkStatus OBJECT-TYPE Uplink Link Status | 1.3.6.1.4.1.11606.2.26.1 | INTEGER (0..1) | read-only | mandatory |
| priUplinkPortCtrl OBJECT-IDENTITY | 1.3.6.1.4.1.11606.2.26.45 | |||
| priUplinkLinkRemoteLoopbackTest OBJECT-TYPE Primary uplink Link Remote loopback test | 1.3.6.1.4.1.11606.2.26.45.15 | INTEGER (0..1) | read-only | mandatory |
| priUplinkTxLoPriorityRateCtrl OBJECT-TYPE Primary Uplink Transmit Low Priority Rate Control | 1.3.6.1.4.1.11606.2.26.45.22 | INTEGER (0..4095) | read-write | mandatory |
| priUplinkRxLoPriorityRateCtrl OBJECT-TYPE Primary Uplink Receive Low Priority Rate Control | 1.3.6.1.4.1.11606.2.26.45.23 | INTEGER (0..4095) | read-write | mandatory |
| priUplinkTxDiffPriorityRateCtrl OBJECT-TYPE Primary Uplink Transmit Differential Priority Rate Control | 1.3.6.1.4.1.11606.2.26.45.24 | INTEGER (0..1) | read-write | mandatory |
| odnrt100 OBJECT-IDENTITY | 1.3.6.1.4.1.11606.3 | |||
| oslam8g OBJECT-IDENTITY | 1.3.6.1.4.1.11606.4 | |||
| oslam8g_Global OBJECT-IDENTITY | 1.3.6.1.4.1.11606.4.1 | |||
| oslam8g_globalCtrl OBJECT-IDENTITY | 1.3.6.1.4.1.11606.4.1.1 | |||
| oslam8gSrcMACAddr OBJECT-TYPE OSLAM-8G Source MAC address =========================== 48bit Source address MAC address for pause control frame. NOTE: First bit of 2nd octet is as followed: This bit used to have all ports transmit the same or different source addresses in full-duplex Pause frames. 0 - All ports transmit the same Static Address (SA) 1 - Each port uses a different SA where bits 4:47 of the 'sourceMACAddress' are the same, but bits 3:0 are the port number (Port 0 = 0, Port1 = 1, Port 2 = 2, etc.) | 1.3.6.1.4.1.11606.4.1.1.1 | Opaque (SIZE(6)) | read-write | mandatory |
| oslam8gSchedulingMode OBJECT-TYPE OSLAM-8G Scheduling Mode ========================= 1 - Use an 8,4,2,1 weighted fair queuing scheme 2 - Us a strict priority scheme | 1.3.6.1.4.1.11606.4.1.1.2 | INTEGER {useFairQueuingScheme(1), useStrictPriorityScheme(2)} | read-write | mandatory |
| oslam8gMaxFrameSize OBJECT-TYPE Maximum Frame Size allowed. =========================== The Ingress block discards all frames less than 64 bytes in size. It also discards all frames greater than a certain size (regardless of whether or not the frame is iEEE802.3ac tagged) as follows: 1 - Max size is 1522 for IEEE tagged frames, 1518 for untagged frames. 2 - Max size is 1632 | 1.3.6.1.4.1.11606.4.1.1.3 | INTEGER {sizeMax1522Octets(1), sizeMax1632Octets(2)} | read-write | mandatory |
| oslam8gCoreTag OBJECT-TYPE OSLAM-8G Core Tag Type ====================== Core Tag Ether Type. This EtherType is added to frames that egress the switch as Double Tagged frames. It is also the EtherType expected during Ingress to determine if a frame is Tagged or not on ports configured in oslam8gPortEgressMode as follows: For Ingress: =========== oslam8gUseCoreTag= 1, oslam8gDoubleTag = 1, TagType = 0x8100 oslam8gUseCoreTag= 1, oslam8gDoubleTag = 2, TagType = 0x8100 oslam8gUseCoreTag= 2, oslam8gDoubleTag = 1, TagType = oslam8gCoreTagType oslam8gUseCoreTag= 2, oslam8gDoubleTag = 2, 1st TagType = oslam8gCoreTagType then 2nd TagType in the frame = 0x8100 For Egress: =========== Normal Add a Tag (standard IEEE rule) Added Tag Type = 0x8100 Always Add a Tag (Egress DoubleTag) Added Tag Type = oslam8gCoreTagType | 1.3.6.1.4.1.11606.4.1.1.4 | INTEGER (0..65535) | read-write | mandatory |
| oslam8gUseDoubleTagData OBJECT-TYPE OSLAM-8G Use Double Tag Data ============================ Used to determine if Double Tag data is removed from a Double Tag frame is used or ignored when making switching decisions on the frame. 1 - Ignore removed Tag data 2 - Use removed Tag data This OID have not effect if hte port's oslam8gPortDoubleTag is set to 1 | 1.3.6.1.4.1.11606.4.1.1.5 | INTEGER {ignoreRemovedTagData(1), useRemovedTagData(2)} | read-write | mandatory |
| oslam8g_globalStatus OBJECT-IDENTITY | 1.3.6.1.4.1.11606.4.1.2 | |||
| oslam8gSerialNumber OBJECT-TYPE OSLAM-8G Serial Number | 1.3.6.1.4.1.11606.4.1.2.1 | DisplayString | read-only | mandatory |
| oslam8gMACAddress OBJECT-TYPE OSLAM-8G SNMP MAC Address | 1.3.6.1.4.1.11606.4.1.2.2 | OCTET STRING (SIZE(12)) | read-only | mandatory |
| oslam8gDiagnosticMsg OBJECT-TYPE OSLAM-8G Diagnostic Message | 1.3.6.1.4.1.11606.4.1.2.3 | DisplayString (SIZE(0..63)) | read-only | mandatory |
| oslam8g_VTU OBJECT-IDENTITY | 1.3.6.1.4.1.11606.4.1.3 | |||
| vtuOperation OBJECT-TYPE VLAN Table Unit Table Operation =============================== Support the following VTU operation. 0, 2 - No Operation 1 - Flush All Entries 3 - Load(1) or Purge(2) an Entry 4 - Get Next(3) 5,6 - Reserve 7 - Get/Clear Violation Data NOTE: (1) - An Entry is Loaded when the 'vtuValid' is set to a one. Load is the only 'vtuOperation' that uses the 'vtuDBNum' field and it uses it as data to be loaded along with the desired 'vtuVID'. (2) - An Entry is Purged when the 'vtuValid' is cleared to a zero. (3) - A Get Next operation finds the next higher 'vtuVID' curretnly in the database. The vtuVID value is used as the VID to start from. To find the lowest VID set the vtuVID field to ones. When the operation is done the vtuVID field contains the next higher VID currently active in the database. To find the next VID simply issue the Get Next opcode again. If the vtuVID field is returned set to a one's with the vtuValid cleared to zero, no higher VID's were found. To Search for a particular VID, perform a Get Next operation using a vtuVID field with a value one less than the one being searched for. | 1.3.6.1.4.1.11606.4.1.3.1 | INTEGER {flushAllEntries(1), noOperation(2), loadOrPurgeEntry(3), getNext(4), getClearViolation(7)} | read-write | mandatory |
| vtuDBNum OBJECT-TYPE VTU MAC Address Database Number =============================== On all vtuOperation except for Get Violation Data, this field is used to separate MAC address dtabases by a frame's VID. If multiple address databases are not being used, theses bits must remain zero. If multiple addresss are not being used, theses bits must remain zero. If multiple address databases are being used, these bits are used to get the desired database number that is associated with VID value on Load operations (or used to read the currently assigned vtuDBNum on Get Next operations). | 1.3.6.1.4.1.11606.4.1.3.2 | INTEGER (0..255) | read-write | mandatory |
| vtuMemberViolation OBJECT-TYPE VTU Member Violation ================== Source Member Violation. On Get/Clear Violation Data vtuOperation, this value is returned set to a two(2) if the Violation being serviced is due to an 802.1Q Member Violation. A member Violation occurs when an 802.1Q enabled ingress port accesses the VTU with a VID that is cotnained in the VTU but whose Mebership list does not include this Ingress port. Only the first vtuFullViolation, vtuMemberViolation, vtuMissViolation is saved per port until cleared. | 1.3.6.1.4.1.11606.4.1.3.3 | INTEGER {noViolation(1), violation(2)} | read-only | mandatory |
| vtuMissViolation OBJECT-TYPE VTU Miss Violation ================== On Get/Clear Violation operation this value is set to a two(2) if the Violation being serviced is due to 802.1Q Miss Violation. A Miss Violation occurs when an 802.1Q enabled Ingress port accesses the VTU with a VID that is contained in the VTU. Only the first atuFullViolation, atuMemberViolation, atuMissViolation is saved per port until cleared. | 1.3.6.1.4.1.11606.4.1.3.4 | INTEGER {noViolation(1), violation(2)} | read-only | mandatory |
| vtuValid OBJECT-TYPE VTU Entry Valid status. ======================= At the end of Get/Next operations 1 - If VID is all ones, it indicates the end of the VID list was reached with no new valid entries. 2 - Indicates the VID value below is valid. NOTE: On Load or Purge operations, this bit indicates the desired operation of a Load (when set to a one) or a Purge (when cleared to a zero). | 1.3.6.1.4.1.11606.4.1.3.5 | INTEGER {invalidVIDOrEndOflist(1), validVID(2)} | read-write | mandatory |
| vtuVID OBJECT-TYPE VLAN Identifier =============== This VID is used in all the vtuOperation commands (except Get/Clear Violation Data) and it is the VID that is associated with the vtuData or the vtuVID that caused the VTU Violation. Theses indicate the VID number that is associated with the MemberTag in the vtuData, 802.1s PortState, Priority and its override. | 1.3.6.1.4.1.11606.4.1.3.6 | INTEGER (0..4095) | read-write | mandatory |
| vtuData OBJECT-TYPE VLAN table data Entry Format as follow: ====================== BYTE#: 5 4 3 2 1 0 Frame: [0:P10][P9:P8][P7:P6][P5:P4][P3:P2][P1:P0] Px: Port control Size: 4bits total Format: [PortState][PortMemberTag] PortState: The upper two bits of each port's VTU data is called 802.1s PortState. These bits are used to support 802.1s per VLAN spanning tree as follows: 00 - 802.1s Disabled. User non-VLAN Port states (in Port control 'portState') 01 - Blocking/Listening Port State for this port for frames with this VID 10 - Learning Port State for this port for frames with this VID 11 - Forwarding Port State for this port for frames with this VID NOTE: These 802.1s PortState bits take precedence over the port's 'portState' in port control unless the port's 'portState' is Disabled (which prevents all frames from flowing). MemberTag: Size: 2bits The lower two bits of each port's VTU data is called MemberTag. These bits are used to indicate which ports are members of the VLAN and if these VLANs frames should be tagged or untagged, or unmodified when exiting the port as follows: 00 - Port is a member of this VLAN and frames are to egress unmodified. 01 - Port is a member of this VLAN and frames are to egress Untagged. 10 - Port is a member of this VLAN and frames are to egress Tagged. 11 - Port is not a member of this VLAN | 1.3.6.1.4.1.11606.4.1.3.7 | Opaque (SIZE(6)) | read-write | mandatory |
| vtuVIDPRI OBJECT-TYPE VID Priority ============ These bits are used to override the priority on any frames associated with this VID value, if the 'vtuVIDPRIOverride' is set to one. | 1.3.6.1.4.1.11606.4.1.3.8 | INTEGER (0..7) | read-write | mandatory |
| vtuVIDPRIOverride OBJECT-TYPE VID Priority Override ===================== 1 - No priority override. 2 - The vtuVIDPRI are used to override the priority on any frames associated with this VID as long as the port's 'portVTUPriOverride' is set. | 1.3.6.1.4.1.11606.4.1.3.9 | INTEGER {noPriorityOverride(1), priorityOverride(2)} | read-write | mandatory |
| oslam8g_ATU OBJECT-IDENTITY | 1.3.6.1.4.1.11606.4.1.4 | |||
| atuOperation OBJECT-TYPE Address Translation Unit (ATU) Opcode: ====================================== 1 - Flush All Entries 2 - Flush all Non-Static Entries 3 - Load or Purge an Entry in a particular atuDBNum Database 4 - Get Next from a particular atuDBNum Database 5 - Flush all Entries in a particular atuDBNum Database 6 - Flush all Non-Static Entries in a particular atuDBNum Database 7 - Get/Clear Violation Data. 8 - No operation | 1.3.6.1.4.1.11606.4.1.4.1 | INTEGER {flushAllEntries(1), flushAllDynamicEntries(2), loadOrPurgeEntry(3), getNext(4), flushAllStaticIntriesInSelectedDBNum(5), flushAllDynamicEntriesInSelectedDBNum(6), getClearViolation(7), noOperation(8)} | read-write | mandatory |
| atuDBNum OBJECT-TYPE ATU MAC Address Database Number (DBNum) ======================================= If multiple address databases are not being used theses bits must remain zero. If multiple address databases are being used theses are used to set the desired address database number that is being used on the Database supported commands (atuOperation 0x03, 0x04, 0x05 and 0x06). On Get/Clear Violation Data atuOperation these bits return the atuDBNum value associated with the ATU violation that was just serviced. | 1.3.6.1.4.1.11606.4.1.4.2 | INTEGER (0..255) | read-write | mandatory |
| atuMemberViolation OBJECT-TYPE ATU Member Violation ================== On Get/Clear Violation operation this value is set to a two(2) if the Violation being serviced is due to a Source Address Look-up that resulted in a Hit but where the 'atuState' and 'atuPortVec' bits does not contain the frame's Ingress port bit set to a two(2) (i.e. a station moved occurred). This violation can be masked on a per port basis by setting the port's ignoreWrongData bit. Only the first atuFullViolation, atuMemberViolation, atuMissViolation is saved per port until cleared. | 1.3.6.1.4.1.11606.4.1.4.3 | INTEGER {noViolation(1), violation(2)} | read-only | mandatory |
| atuMissViolation OBJECT-TYPE ATU Miss Violation ================== On Get/CLear Violation operation this value is set to a two(2) if the Violation being serviced is due to a Source Address Look-up that resulted in a Miss on ports that are locked (i.e., CPU directed learning is enabled on the port). Only the first atuFullViolation, atuMemberViolation, atuMissViolation is saved per port until cleared. | 1.3.6.1.4.1.11606.4.1.4.4 | INTEGER {noViolation(1), violation(2)} | read-only | mandatory |
| atuFullViolation OBJECT-TYPE ATU Full Violation ================== On Get/Clear Violation operation this value is set to a two(2) if the Violation being serviced is due to a Load operation or automatic learn that could not store the desired entry. This only occurs if all available locations for the desired address contain other MAC addresses that are loaded Static. Only the first atuFullViolation, atuMemberViolation, atuMissViolation is saved per port until cleared. | 1.3.6.1.4.1.11606.4.1.4.5 | INTEGER {noViolation(1), violation(2)} | read-only | mandatory |
| atuAgeTime OBJECT-TYPE ATU Age Time ============ These bits determine the time that each ATU Entry remains valid in the database, since its last access as a source address, before being purged. The value in this register times 15 is the age time in seconds. For example: The default value of 0x14 is 20 decimal. 20x15 = 300 seconds or 5 minutes. If the atuAgeTime is 0xFF or 3825 seconds or almost 64 minutes. if the atuAgeTime is set to 0 the Aging function is disabled and all learned addresses will remain in the database forever. | 1.3.6.1.4.1.11606.4.1.4.6 | INTEGER (0..255) | read-write | mandatory |
| atuTrunkMode OBJECT-TYPE TRUNK - Trunk Mappped Address ============================= 1 - The 'atuPortVec' is the port vector assigned to this address. 2 - The data bits [7:4] of 'atuPortVec' is the Trunk ID assigned to this address. 'atuPortVec' bits [10:4] must be written as zero when this value is zet to a two(2). | 1.3.6.1.4.1.11606.4.1.4.7 | INTEGER {portVectorMode(1), trunkIDMode(2)} | read-only | mandatory |
| atuPortVecorTrunkID OBJECT-TYPE Port Vector/Trunk ID ==================== If the atuTrunk is zero, theses bits are used as the input Port Vector for ATU Load operations and it's the resulting Trunk ID for ATU load operations and it's the resulting Trunk ID from ATU GetNext operations. | 1.3.6.1.4.1.11606.4.1.4.8 | INTEGER (0..255) | read-write | mandatory |
| atuEntryState OBJECT-TYPE ATU Entry State =============== Used as the Entry State for ATU Load/Purge or Flush/Move operations and it is the resulting Entry State from ATU Get Next operations (GetNext is the only ATU operation supported in the devices). If theses equal to 0x0 then the atuOperation is a Purge or a Flush. If theses bits are not 0x0 then the atuOperation is a Load or a Move (a move atuOperation requires these bits to be 0x0F). On Get/Clear Violation Data atuOperation, theses bits return the Source Port ID(SPID) associated with the ATU violation that was just serviced. If SPID = 0xF the source of the violation was the CPU's register interface (i.e. the ATU was full during a CPU Load operation). | 1.3.6.1.4.1.11606.4.1.4.9 | INTEGER (0..15) | read-write | mandatory |
| atuMACEntry OBJECT-TYPE ATU MAC Address Entry: ====================== Byte pattern as follow: Opaque data Location: 5 4 3 2 1 0 MAC Byte Location : [5][4][3][2][1][0] | 1.3.6.1.4.1.11606.4.1.4.10 | Opaque (SIZE(6)) | read-write | mandatory |
| oslam8g_Port OBJECT-IDENTITY | 1.3.6.1.4.1.11606.4.2 | |||
| oslam8gPortSelect OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.1 | INTEGER | read-write | mandatory |
| oslam8g_portCtrl OBJECT-IDENTITY | 1.3.6.1.4.1.11606.4.2.2 | |||
| oslam8gPortForceFlowCtrl OBJECT-TYPE OSLAM-8G Port Force Flow Control Setting ======================================== 1 - Force No Flow Control 2 - Normal detection occurs 3 - Force Flow Control | 1.3.6.1.4.1.11606.4.2.2.1 | INTEGER {forceNoFlowCtrl(1), normal(2), forceFlowCtrl(3)} | read-write | mandatory |
| oslam8gPortForceLink OBJECT-TYPE OSLAM-8G Port Force Link ======================== 1 - Force to bring link down 2 - Normal link detection occurs 3 - Force to bring link up | 1.3.6.1.4.1.11606.4.2.2.2 | INTEGER {forceLinkDown(1), normal(2), forceLinkUp(3)} | read-write | mandatory |
| oslam8gPortForceDuplex OBJECT-TYPE OSLAM-8G Port Force Duplex Control ================================== 1 - Force Half-Duplex 2 - Normal duplex detection occurs. 3 - Force Full-Duplex | 1.3.6.1.4.1.11606.4.2.2.3 | INTEGER {forceHalfDuplex(1), normal(2), forceFullDuplexx(3)} | read-write | mandatory |
| oslam8gPortForceSpeed OBJECT-TYPE OSLAM-8G Port Force Speed ========================= 1 - 10Mbps 2 - 100Mbps 3 - 1000Mbps 4 - Speed is not forced. Normal speed detection occurs. | 1.3.6.1.4.1.11606.4.2.2.4 | INTEGER {speed10Mbps(1), speed100Mbps(2), speed1000Mbps(3), speedAutoDetect(4)} | read-write | mandatory |
| oslam8gPortPortState OBJECT-TYPE OSLAM-8G Port's Port State =========================== This OID is used to manage a port to determine what kind of frames, if any, are allowed to enter or leave a port for simple bridge loop detection or 802.1D Spanning Tree. This OID value can be change at any time without disrupting frames currently in transmit. 1 - Disabled. The port is disabled and it will not receive or transmit any frames. The QC returns any pre-allocated ingress queue buffers when the port is in this mode. 2 - Blocking/Listening. OSLAM-8G examines all frames without learning any SAs, and discards all frames. 3 - Learning. OSLAM-8G will examine all frames, learning all SA address (except those from MGMT frames), and still discard all but MGMT frames. It will allow MGMT frames only to exit the port. 4 - Forwarding. OSLAM-8G examines all frames, learning SAs from all good frames (except those from MGMT frames), and receives and transmits all frames as a normal switch. | 1.3.6.1.4.1.11606.4.2.2.5 | INTEGER {disabled(1), blockingListening(2), learning(3), forwarding(4)} | read-write | mandatory |
| oslam8gPortFwdUnknown OBJECT-TYPE OSLAM-8G Port Forward Unknown ============================= 1 - Unicast frames with unknown DAs will not egress out of this port. 2 - Normal operation occurs and unicast frames with unknown DA addresses are allowed to egress out of this port (assuming the VLAN settings allow the frame to egress this port too). | 1.3.6.1.4.1.11606.4.2.2.6 | INTEGER {blockUnicastWithUnknownDA(1), normalForward(2)} | read-write | mandatory |
| oslam8gPortDefFwd OBJECT-TYPE OSLAM-8G Port Default Forward ============================= 1 - Multicast frames with unknown DAs do not egress from this port. 2 - Normal switch operation occurs and multicast frames with unknown DA addresses are allowed to egress out this port (assuming the VLAN settings allow the frame to egress this port too). | 1.3.6.1.4.1.11606.4.2.2.7 | INTEGER {blockMulticastWithUnknownDA(1), normalForward(2)} | read-write | mandatory |
| oslam8gPortUseIPForPriority OBJECT-TYPE OSLAM-8G Port Use IP for Priority ================================= Use IPv4 TOS and/or DiffServ fields and/or IPv6 Traffic Class fields, if present, for priority data. 1 - Ignore IPv4 and IPv6 priority fields. 2 - Use IPv4 fields if the frame is IPv4 and use IPv6 fields if the frame is IPv6 for priority data. | 1.3.6.1.4.1.11606.4.2.2.8 | INTEGER {useIPv4AndIPv6Priority(1), useIPv4OrIPv6Priority(2)} | read-write | mandatory |
| oslam8gPortUseCoreTag OBJECT-TYPE OSLAM-8G Port Use Core Tag ========================== Refer to 'oslam8gCoreTag' 1 - Ingressing frames are considered tagged if the 16-bits following the frame's source Address are 0x8100. 2 - Ingressing frames are considered tagged if the 16-bits following the frame's source Address are equal to 'oslam8gCoreTagType' NOTE: If a frame is Double Tagged and the first tag is removed (oslam8gPortDoubleTag) by matching the EtherType define by this bit, the resulting frame will be considered tagged only if the next 16 bits in the frame equal to 0x8100 (that is, the oslam8gCoreTagType is not used after the first tag is removed) | 1.3.6.1.4.1.11606.4.2.2.9 | INTEGER {normal(1), useCoreTag(2)} | read-write | mandatory |
| oslam8gPortDoubleTag OBJECT-TYPE OSLAM-8G Port Double Tag ======================== Ingress Double Tag 2 - The ingressing frames are examined to see if they contain 802.3ac tag with the IEEE standard EtherType of 0x8100 or if they contain a tag with an EtherType defined in oslam8gCoreTag. The oslam8gCoreTag will be used if this port's oslam8gPortUseCoreTag is used. If the frames do contain the expected tag, the tag is removed (and the CRC is recomputed). Essentially, untagged frames remain untagged, single tagged frames become untagged and double tagged frames become single tagged. These now single tagged frames will be considered tagged only if its EtherType value is 0x8100 no matter what the EtherType value was found on the removed tag. No padding is performed so a tagged frame must be at least 68bytes in size or it will be discarded. 1 - Tagged frames are not modified when received. The Tag data that is removed from the frame can be ignored (i.e., the frame is treated as if the removed tag never existed) or the removed Tag data can be used for switching and priority decisions (i.e., the removed Tag's VID and PRI bits are internally assigned to the frame). The action that is taken is controlled by the oslam8gUseDoubleTagData | 1.3.6.1.4.1.11606.4.2.2.10 | INTEGER {normal(1), useDoubleCoreTag(2)} | read-write | mandatory |
| oslam8g_portRateCtrl OBJECT-IDENTITY | 1.3.6.1.4.1.11606.4.2.3 | |||
| oslam8gPortEgressRate OBJECT-TYPE OSLAM-8G Port Egress Rate Limit ================================ Modify this port's effective transmission rate. This support 62kbps to 256Mbps. Formula to limit the Egress data rate: EgressRate = 8 bits/ (32ns * Egress Rate bits/sec) Where, => Egress Rate is in bits per second. For example: ============ For 256Kbps rate the value of this oslam8gPortEgressRate should be: = 8/(32ns * 256Kbps) = 976 The value to be programmed for this OID is 976. 976 is actually equated to 256.14Kbps | 1.3.6.1.4.1.11606.4.2.3.1 | INTEGER (0..4095) | read-write | mandatory |
| oslam8gPortIngressLimitMode OBJECT-TYPE OSLAM-8G Port Ingress Limit Mode ================================ Determine what kinds of frames are limited and counted against Ingress limiting. 1 - Limit and count all frames. 2 - Limit and count Broadcast, Multicast and flooded unicast frames. 3 - Limit and count Broadcast and Multicast frames only. 4 - Limit and count Broadcast frames only. NOTE: If a frame is not limited by the above setting, its size is not counted against the limit for the other frames. | 1.3.6.1.4.1.11606.4.2.3.2 | INTEGER {limitAllFrames(1), limitBroadcastMulticastUnicastFrame(2), limitBroadcastMulticastFrame(3), limitBroadcastFrame(4)} | read-write | mandatory |
| oslam8gPortIngressPri3Rate OBJECT-TYPE OSLAM-8G Port Priority 3 Rate Control ===================================== Priority 3 frames are discarded after the ingress rate selected below is reached or exceeded: 1 - Use the same rate as oslam8gPortIngressPri2Rate 2 - Use twice the rate as oslam8gPortIngressPri2Rate (but no faster than the port's speed) | 1.3.6.1.4.1.11606.4.2.3.3 | INTEGER {useIngressPri2Rate(1), useTwiceIngressPri2Rate(2)} | read-write | mandatory |
| oslam8gPortIngressPri2Rate OBJECT-TYPE OSLAM-8G Port Priority 2 Rate Control ===================================== Priority 2 frames are discarded after the ingress rate selected below is reached or exceeded: 1 - Use the same rate as oslam8gPortIngressPri1Rate 2 - Use twice the rate as oslam8gPortIngressPri1Rate (but no faster than the port's speed) | 1.3.6.1.4.1.11606.4.2.3.4 | INTEGER {useIngressPri1Rate(1), useTwiceIngressPri1Rate(2)} | read-write | mandatory |
| oslam8gPortIngressPri1Rate OBJECT-TYPE OSLAM-8G Port Priority 1 Rate Control ===================================== Priority 1 frames are discarded after the ingress rate selected below is reached or exceeded: 1 - Use the same rate as oslam8gPortIngressPri0Rate 2 - Use twice the rate as oslam8gPortIngressPri0Rate (but no faster than the port's speed) | 1.3.6.1.4.1.11606.4.2.3.5 | INTEGER {useIngressPri0Rate(1), useTwiceIngressPri0Rate(2)} | read-write | mandatory |
| oslam8gPortIngressPri0Rate OBJECT-TYPE OSLAM-8G Port Priority 0 Rate Control ===================================== Priority 1 frames are discarded after the ingress rate selected below is reached or exceeded: OSLAM-8G use the following formula to calculate rate limiting: Pri0Rate = 8 bits/ (32ns * Ingress Rate bits/sec) Where, => Ingress Rate is in bits per second. For example: ============ For 128Kbps rate the value of this oslam8gPortEgressRate should be: = 8/(32ns * 128Kbps) = 1953 | 1.3.6.1.4.1.11606.4.2.3.6 | INTEGER (0..4095) | read-write | mandatory |
| oslam8g_PortVLAN OBJECT-IDENTITY | 1.3.6.1.4.1.11606.4.2.4 | |||
| oslam8gPortUseTag OBJECT-TYPE OSLAM-8G Port Use Tag ===================== Use IEEE Tags. Use IEEE 802.1p Traffic Class field for priority data if the frame is an IEEE 802.3ac tagged frame. 1 - Ignore IEEE 802.1p tag fields even it the frame is tagged. In this mode, tagged frames that enter this port and egress the OSLAM-8G tagged are re-tagged with this port's default priority bits, if no other priorities are determined fro the frame (i.e., the frame's IP priority and/or other priority overrides). This works as a Force Default Priority function on tagged frames. 2 - Use IEEE 802.1p tag Traffic Class for priority data if the frame is tagged. | 1.3.6.1.4.1.11606.4.2.4.1 | INTEGER {ignoreIEEE802dot1pTag(1), useIEEE802dot1pTag(2)} | read-write | mandatory |
| oslam8gPortPortMembership OBJECT-TYPE OSLAM-8G Port's Port Membership =============================== Port based VLAN Table. The bits in this value are used to restrict which output ports this input port can send frames to. This value are used for all frames even if 802.1Q is enabled on this port or if ProtectedPort is enabled on this port. These bits restrict where a port can send frames (unless a oslam8gPortVLANTunnel frame is being received. => To send frames to Port 0, bit 0 of this register must be a one. => To send frames to Port 1, bit 1 of this register must be a one. etc. | 1.3.6.1.4.1.11606.4.2.4.2 | INTEGER (0..2047) | read-write | mandatory |
| oslam8gPortDefPri OBJECT-TYPE OSLAM-8G Port Default Priority ============================== Used as the default ingress priority to use when no other priority information is available (neither is the frame IEEE Tagged, nor is it an IPv4 nor an IPv6 frame - or the frame is a priority type that is currently disabled (see oslam8gPortUseIPPriority and oslam8gPortUseTag) and no other priority overrides are active on this frame. The default priority are remapped by the oslam8gPortPriRemap prior being used. | 1.3.6.1.4.1.11606.4.2.4.3 | INTEGER (0..7) | read-write | mandatory |
| oslam8gPort802dot1QMode OBJECT-TYPE OSLAM-8G Port 802.1Q Mode ========================= IEEE 802.1Q Mode for this port. These bits determine if 802.1Q based VLANs are used along with port based VLANs for this Ingress port. If also determines the action to be taken if an 802.1Q VLAN Violation is detected. 1 - 802.1Q disabled. Use Port Based VLANs only. The oslam8gPortMembership and oslam8gPortDefVID assigned to the frame during ingress determine which Egress ports this Ingress is allowed to switch frames to for all frames. 2 - Fallback. Enable 802.1Q for this Ingress port. Do not discard Ingress Membership violations and use the oslam8gPortMembership if the frame's VID is not contained in the VTU. 3 - Check. Enabled 802.1Q for this Ingress port. Do not discard Ingress Membership violation but discard the frame if its VID is not contained in the VTU. 4 - Secure. Enabled 802.1Q for this Ingress port. Do not discard Ingress Membership violations and discard frames whose VID is not contained in the VTU. | 1.3.6.1.4.1.11606.4.2.4.4 | INTEGER {portBasedVLANOnly(1), fallback802dot1Q(2), check802dot1Q(3), secure802dot1Q(4)} | read-write | mandatory |
| oslam8gPortTagUntagDiscard OBJECT-TYPE OSLAM-8G Port Tagged/Untagged Discard Mode ========================================== 1 - No discard of Frames 2 - Only Discard Untagged Frames. All non-MGMT frames that are processed as untagged are discarded as they entering this switch port. This test is performed after Ingress Double Tag removal (if enabled). 3 - Only Discard Tagged Frames. All non-MGMT frames that are processed as tagged are discarded as they entering this switch port. This test is performed after Ingress Double Tag removal (if enabled). Priority only tagged frames (with a VID of 0x00) are considered tagged. 4 - Both Discard Tagged and Untagged frames. | 1.3.6.1.4.1.11606.4.2.4.5 | INTEGER {noDiscard(1), discardUnTaggedFrames(2), discardTaggedFrames(3), discardBoth(4)} | read-write | mandatory |
| oslam8gPortDefVID OBJECT-TYPE OSLAM-8G Port Default VLAN Identifier ===================================== When 802.1Q is enabled on this port this value is used as the IEEE Tagged VID added to untagged or priority tagged frames during egress that ingressed from this port. It is also used as a tagged frame's VID if the frame's VID was 0 (i.e., it is a priority tagged frame) or if the port's oslam8gPortForceDefVID is set to one. When 802.1Q is disabled on this port, this value field is assigned to all frames entering the port (if are tagged or untagged). This assignment is used internal to the switch, so only Port Based VLANs can be supported. | 1.3.6.1.4.1.11606.4.2.4.6 | INTEGER (0..4095) | read-write | mandatory |
| oslam8gPortVLANTunnel OBJECT-TYPE OSLAM-8G Port VLAN Tunnel ========================= 1 - The port based VLANs defined in oslam8gPortPortMembership, 802.1Q VLANs defined in the oslam8g-802dot1QVLAN (if 802.1Q is enabled) and oslam8gTrunkMask are enforced for ALL frames. 2 - The port based oslam8gPortPortMembership, 802.1Q VLAN membership masking and oslam8gTrunkMask is bypassed for any frame entering this port with a DA that is currently 'static' in the oslam8g-atu. This applies to unicast as well as multicast frames. | 1.3.6.1.4.1.11606.4.2.4.7 | INTEGER {vlanNoTunnelling(1), vlanTunnelling(2)} | read-write | mandatory |
| oslam8gPortVTUPriOverride OBJECT-TYPE OSLAM-8G Port VTU Priority Override =================================== 1 - Normal frame priority processing occurs. 2 - The VTU priority overrides can occur on this port. A VTU priority override occurs when the determined VID of a frame resuls in a VID whose oslam8gVTUVIDPRIOverride in the VTU VLAN database is set. When this occurs the VIDPRI value assigned to the frame's VID is used to overrite the frames previously determined priority. If the frame egresses tagged the priority in the frame will be this new VIDPRI value. When used the upper two bits of the VIDPRI priority determine the Egress Queue the frame is switched into. THE VTU Priority Override has higher priority than the port's Default Priority and the frame's IEEE and/or IP priorities. The priority determined by the frame's VID can be overridden, however, by the frame's SA and/or DA prority Overrides. | 1.3.6.1.4.1.11606.4.2.4.8 | INTEGER {normalPriority(1), vtuPriOverride(2)} | read-write | mandatory |
| oslam8gPortForceDefVID OBJECT-TYPE OSLAM-8G Port Force Default VID =============================== For to use Default VID. When 802.1Q is enabled on this port and 1 - All IEEE 802.3ac Tagged frames with a non-zero VID used the frame's VID unmodified. 2 - All ingress frames with IEEE 802.3ac Tags have their VID ignored and the port's oslam8gPortDefaultVID is used and replaced into the frame instead. When 802.1Q is disabled on this port, this bit has no effect. | 1.3.6.1.4.1.11606.4.2.4.9 | INTEGER {vidNormal(1), forceDefaultVID(2)} | read-write | mandatory |
| oslam8gEgressMode OBJECT-TYPE OSLAM-8G Port Egress Mode ========================= The first three Egrress Modes are used as the default Egress mode for frames whose VID is not valid in the oslam8g-802dot1QVLAN or if 802.1Q is disabled on the port. The fourth Egress Mode is applied to all frames all the time (if selected) even if 802.1Q is enabled on the port. 1 - Default to Normal mode. Frames are transmitted unmodified. 2 - Default to Transmit all frames Untagged. Remove the tag from any tagged frame. 3 - Default to Transmit all frames Tagged. Add a tag to any untagged frame. 4 - Always add a Tag (or Egress Double Tag). This setting is not a default setting. It ignores the MemberTag in vtuData of oslam8g-802dot1QVLAN for this port. The EtherType used for these inserted tags come from oslam8gCoreTag. | 1.3.6.1.4.1.11606.4.2.4.10 | INTEGER {egressNormal(1), egressUntaggedRemoveTaggedFrame(2), egressTagAddToUntaggedFrame(3), egressAddAlways(4)} | read-write | mandatory |
| oslam8gPortPriRemap OBJECT-TYPE OSLAM-8G Port IEEE Priority Remapping ==================================== Byte#: 3 2 1 0 Format: [TagRemap7:TagRemap6][TagRemap5:TagRemap4][TagRemap3:TagRemap2][TagRemap1:TagRemap0] TagRemap0: Tag Remap 0. All IEEE tagged frames with a priority of 0 get this value as the frame's new priority inside the switch. If a tagged frame egresses the switch tagged, this new priority is written to the frame's tag. TagRemap1: Tag Remap 1. All IEEE tagged frames with a priority of 1 get this value as the frame's new priority inside the switch. If a tagged frame egresses the switch tagged, this new priority is written to the frame's tag. TagRemapX: Tag Remap X. All IEEE tagged frames with a priority of X get this value as the frame's new priority inside the switch. If a tagged frame egresses the switch tagged, this new priority is written to the frame's tag. | 1.3.6.1.4.1.11606.4.2.4.11 | Opaque (SIZE(4)) | read-write | mandatory |
| oslam8g_portStatus OBJECT-IDENTITY | 1.3.6.1.4.1.11606.4.2.5 | |||
| oslam8gPortLinkStatus OBJECT-TYPE Link Status: ============ This indicates the link status of the selected port 1 - Link is down 2 - Link is Up | 1.3.6.1.4.1.11606.4.2.5.1 | INTEGER {linkDown(1), linkUp(2)} | read-only | mandatory |
| oslam8gPortDuplexStatus OBJECT-TYPE Duplex Mode: ============ Valid if link status is up. 1 - Half-Duplex 2 - Full-Duplex | 1.3.6.1.4.1.11606.4.2.5.2 | INTEGER {halfDuplex(1), fullDuplex(2)} | read-only | mandatory |
| oslam8gPortSpeedStatus OBJECT-TYPE Speed Mode: =========== Valid if link status is up. 1 - 10MBps 2 - 100MBps 3 - 1000MBps 4 - Reserved for future used | 1.3.6.1.4.1.11606.4.2.5.3 | INTEGER {speed10Mbps(1), speed100MBps(2), speed1000MBps(3), speedReserved(4)} | read-only | mandatory |
| oslam8g_portRMON OBJECT-IDENTITY | 1.3.6.1.4.1.11606.4.2.6 | |||
| oslam8gPortRMONIngress OBJECT-IDENTITY | 1.3.6.1.4.1.11606.4.2.6.1 | |||
| oslam8gPortInGoodOctetsLo OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.1.1 | Counter | read-only | mandatory |
| oslam8gPortInGoodOctetsHi OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.1.2 | Counter | read-only | mandatory |
| oslam8gPortInBadOctets OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.1.3 | Counter | read-only | mandatory |
| oslam8gPortInUnicast OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.1.4 | Counter | read-only | mandatory |
| oslam8gPortInBroadcasts OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.1.5 | Counter | read-only | mandatory |
| oslam8gPortInMulticasts OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.1.6 | Counter | read-only | mandatory |
| oslam8gPortInPause OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.1.7 | Counter | read-only | mandatory |
| oslam8gPortInUndersize OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.1.8 | Counter | read-only | mandatory |
| oslam8gPortInFragments OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.1.9 | Counter | read-only | mandatory |
| oslam8gPortInOversize OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.1.10 | Counter | read-only | mandatory |
| oslam8gPortInJabber OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.1.11 | Counter | read-only | mandatory |
| oslam8gPortInRxErr OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.1.12 | Counter | read-only | mandatory |
| oslam8gPortInFCSErr OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.1.13 | Counter | read-only | mandatory |
| oslam8gPortInDiscards OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.1.14 | Counter | read-only | mandatory |
| oslam8gPortInFiltered OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.1.15 | Counter | read-only | mandatory |
| oslam8gPortRMONEgress OBJECT-IDENTITY | 1.3.6.1.4.1.11606.4.2.6.2 | |||
| oslam8gPortOutOctetsLo OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.2.1 | Counter | read-only | mandatory |
| oslam8gPortOutOctetsHi OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.2.2 | Counter | read-only | mandatory |
| oslam8gPortOutUnicast OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.2.3 | Counter | read-only | mandatory |
| oslam8gPortOutBroadcasts OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.2.4 | Counter | read-only | mandatory |
| oslam8gPortOutMulticasts OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.2.5 | Counter | read-only | mandatory |
| oslam8gPortOutPause OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.2.6 | Counter | read-only | mandatory |
| oslam8gPortOutExcessive OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.2.7 | Counter | read-only | mandatory |
| oslam8gPortOutCollisions OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.2.8 | Counter | read-only | mandatory |
| oslam8gPortOutDeferred OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.2.9 | Counter | read-only | mandatory |
| oslam8gPortOutSingle OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.2.10 | Counter | read-only | mandatory |
| oslam8gPortOutMultiple OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.2.11 | Counter | read-only | mandatory |
| oslam8gPortOutFCSErr OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.2.12 | Counter | read-only | mandatory |
| oslam8gPortOutLate OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.2.13 | Counter | read-only | mandatory |
| oslam8gPortOutFiltered OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.2.14 | Counter | read-only | mandatory |
| oslam8gPortHistogram OBJECT-IDENTITY | 1.3.6.1.4.1.11606.4.2.6.3 | |||
| oslam8gPortHistogramMode OBJECT-TYPE Histogram Counters Mode: ======================== The Histogram mode control how the Histogram counters work as follows. 1 - Count received frames only 2 - Count transmitted frames only 3 - Count receive and tranmitted frames | 1.3.6.1.4.1.11606.4.2.6.3.1 | INTEGER {countRxFramesOnly(1), countTxFramesOnly(2), countRxTxFrames(3)} | read-write | mandatory |
| oslam8gPortOut64Octets OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.3.2 | Counter | read-only | mandatory |
| oslam8gPortOut65to127Octets OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.3.3 | Counter | read-only | mandatory |
| oslam8gPortOut128to255Octets OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.3.4 | Counter | read-only | mandatory |
| oslam8gPortOut256to511Octets OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.3.5 | Counter | read-only | mandatory |
| oslam8gPortOut512to1023Octets OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.3.6 | Counter | read-only | mandatory |
| oslam8gPortOut1024toMaxOctets OBJECT-TYPE | 1.3.6.1.4.1.11606.4.2.6.3.7 | Counter | read-only | mandatory |
| fpcm OBJECT-IDENTITY | 1.3.6.1.4.1.11606.5 | |||
| targetNodeAddress OBJECT-TYPE Target Node Address: ==================== FPCM is a broadcast device. 10 digits decimal address required to access the target optical node. Value of 4294967295 represent a broadcast address i.e. message will be send to all connected node. This value is the serial number of the ODN4P-ABC. | 1.3.6.1.4.1.11606.5.1 | OCTET STRING (SIZE(10)) | read-write | mandatory |
| odn4pAccess OBJECT-IDENTITY | 1.3.6.1.4.1.11606.5.2 | |||
| odn4pABSwitchingMode OBJECT-TYPE AB Switching Mode: ================== The mode of operation for ODN4P-AB. Available operation mode are: - AUTOMATIC - MANUAL | 1.3.6.1.4.1.11606.5.2.1 | INTEGER {manual(1), automatic(2)} | read-write | mandatory |
| odn4pChannelSelect OBJECT-TYPE Channel Select: =============== The channel to be selected by the AB redundancy switch. Upon changing the channel, AB operation mode at the target device will change to MANUAL mode automatically. | 1.3.6.1.4.1.11606.5.2.2 | INTEGER {priOpt(1), secOpt(2)} | read-write | mandatory |
| odn4pSwitchingHysteresis OBJECT-TYPE Switch Hysteresis: ================== Primary Optical recovery level. | 1.3.6.1.4.1.11606.5.2.3 | INTEGER {neg3dot5dBmV(0), neg3dot0dBmV(1), neg2dot5dBmV(2), neg2dot0dBmV(3), neg1dot5dBmV(4), neg1dot0dBmV(5), neg0dot5dBmV(6), neg0dot0dBmV(7)} | read-write | mandatory |
| odn4pPrimarySwitchOverTime OBJECT-TYPE Primary switch-over time: ========================= The number of second wait required before change of state | 1.3.6.1.4.1.11606.5.2.4 | INTEGER (1..15) | read-write | mandatory |
| odn4pSecondarySwitchOverTime OBJECT-TYPE Secondary switch-over time: =========================== The number of second wait required before change of state | 1.3.6.1.4.1.11606.5.2.5 | INTEGER (1..15) | read-write | mandatory |
| odn4pAttenuator1 OBJECT-TYPE Attenuator 1: ============= Attenuation used for ingress control. Unit is in 1dB step. Acceptable value range: 2-40dB | 1.3.6.1.4.1.11606.5.2.6 | INTEGER (2..40) | read-write | mandatory |
| odn4pAttenuator2 OBJECT-TYPE Attenuator 2: ============= Attenuation used for ingress control. Unit is in 1dB step. Acceptable value range: 2-40dB | 1.3.6.1.4.1.11606.5.2.7 | INTEGER (2..40) | read-write | mandatory |
| odn4pAttenuator3 OBJECT-TYPE Attenuator 3: ============= Attenuation used for ingress control. Unit is in 1dB step. Acceptable value range: 2-40dB | 1.3.6.1.4.1.11606.5.2.8 | INTEGER (2..40) | read-write | mandatory |
| odn4pAttenuator4 OBJECT-TYPE Attenuator 4: ============= Attenuation used for ingress control. Unit is in 1dB step. Acceptable value range: 2-40dB | 1.3.6.1.4.1.11606.5.2.9 | INTEGER (2..40) | read-write | mandatory |
| odn4pHomeFskChannel OBJECT-TYPE Remote node FSK home channel: ============================= Each network may use different default FSK channel. This is the default FSK channel to be managed by operator. Optical node always tune to home channel prior to agility. | 1.3.6.1.4.1.11606.5.2.10 | INTEGER (0..100) | read-write | mandatory |
| odn4pFskMode OBJECT-TYPE FSK Operating mode ================== Force FSK to operate in either FIX or AGILE mode. FIX - FSK receiver always try to lock to the known FSK frequency AGILE - Always search for an FSK channel that is capable of decoding data | 1.3.6.1.4.1.11606.5.2.11 | INTEGER {fskFix(1), fskAgile(2)} | read-write | mandatory |
| odn4pLoopTest OBJECT-TYPE ODN4P LOOP TEST =============== Acceptable value is 0-255 or 8-bit number. Value between between 1..255 will be display on the connected RPQRM of the selected channel if this OID has been iniated. Set value to 0xFB will clear loopback test and normal data will then be seen in the RPQRM. Operator should only use value between 0x70 to 0x7F for testing Other values are reserved for NETCRAFT | 1.3.6.1.4.1.11606.5.2.12 | INTEGER {uidSrcAddr0(22), uidSrcAddr1(23), uidSrcAddr2(24), uidSrcAddr3(25), uidAddr0(26), uidAddr1(27), uidAddr2(28), uidAddr3(29), uidMajorVer(30), uidMinorVer(31), uidAtten0(33), uidAtten1(34), uidAtten2(35), uidAtten3(36), uidFSKCh(48), uidFSKMode(50), uidPassTest112(112), uidPassTest113(113), uidPassTest114(114), uidPassTest115(115), uidPassTest116(116), uidPassTest117(117), uidPassTest118(118), uidPassTest119(119), uidPassTest120(120), uidPassTest121(121), uidPassTest122(122), uidPassTest123(123), uidPassTest124(124), uidPassTest125(125), uidPassTest126(126), uidPassTest127(127), uidModeSel(129), uidInpSel(130), uidPriRefLvl(131), uidPriSwtTime(132), uidSecSwtTime(133), uidModeChgCnt(134), uidInpChgCnt(135), uidClearTest(251)} | read-write | mandatory |
| nodeAccess OBJECT-IDENTITY | 1.3.6.1.4.1.11606.5.3 | |||
| nodeAccessDataLength OBJECT-TYPE Node Access Control Data Length: ================================ This usually used by remote management software (NMS3) Operator should ignore or do not change this OID value. | 1.3.6.1.4.1.11606.5.3.1 | INTEGER | read-write | mandatory |
| nodeAccessData OBJECT-TYPE Node Access Control Data: ========================= This usually used by remote management software (NMS3) Operator should ignore or do not change this OID value. | 1.3.6.1.4.1.11606.5.3.2 | Opaque (SIZE(0..32)) | read-write | mandatory |
| nodeAccessCmd OBJECT-TYPE Node Access Control Command: ============================ This usually used by remote management software (NMS3) Operator should ignore or do not change this OID value. | 1.3.6.1.4.1.11606.5.3.3 | INTEGER (0..255) | read-write | mandatory |
| fpcmCtrl OBJECT-IDENTITY | 1.3.6.1.4.1.11606.5.4 | |||
| fpcmFSKChannel OBJECT-TYPE FSK Channel modulated by FPCM: ============================== Acceptable FSK channel range 0-100. FSK modulation range 80-90MHz (Channel 0-100 respectively) | 1.3.6.1.4.1.11606.5.4.1 | INTEGER (0..100) | read-write | mandatory |
| fpcmRFLevel OBJECT-TYPE FPCM RF level ============= RF level setting in 1dBmV scale. Current supported value is 25-45dBmV | 1.3.6.1.4.1.11606.5.4.2 | INTEGER (25..45) | read-write | mandatory |
| mau OBJECT-IDENTITY | 1.3.6.1.4.1.11606.6 | |||
| mauProductInfo OBJECT-IDENTITY | 1.3.6.1.4.1.11606.6.1 | |||
| mauProductModelName OBJECT-TYPE Product model name | 1.3.6.1.4.1.11606.6.1.1 | OCTET STRING | read-only | mandatory |
| mauProductVersion OBJECT-TYPE Product version number | 1.3.6.1.4.1.11606.6.1.2 | OCTET STRING | read-only | mandatory |
| mauProductVersionDate OBJECT-TYPE Product build date | 1.3.6.1.4.1.11606.6.1.3 | OCTET STRING | read-only | mandatory |
| mauProductMAC OBJECT-TYPE | 1.3.6.1.4.1.11606.6.1.4 | OCTET STRING (SIZE(6)) | read-only | mandatory |
| mauProductSerialNumber OBJECT-TYPE | 1.3.6.1.4.1.11606.6.1.5 | OCTET STRING (SIZE(6)) | read-only | mandatory |
| mauStatus OBJECT-IDENTITY | 1.3.6.1.4.1.11606.6.2 | |||
| mauStatusVACType OBJECT-TYPE VAC input type. e.g. '220V' | 1.3.6.1.4.1.11606.6.2.1 | TypePowerSupply | read-only | mandatory |
| mauStatus5V OBJECT-TYPE +5V supply voltage level. Unit is in Volt e.g. 4.92V | 1.3.6.1.4.1.11606.6.2.2 | OCTET STRING | read-only | mandatory |
| mauStatus12V OBJECT-TYPE +12V supply voltage level. Unit is in Volt e.g. 12.00V | 1.3.6.1.4.1.11606.6.2.3 | OCTET STRING | read-only | mandatory |
| mauStatus24V OBJECT-TYPE +24V supply voltage level. Unit is in Volt e.g. 24.10V | 1.3.6.1.4.1.11606.6.2.4 | OCTET STRING | read-only | mandatory |
| mauStatusInputOpticalPower OBJECT-TYPE Optical input power level. Unit is in dBm e.g. -2.05dBm | 1.3.6.1.4.1.11606.6.2.5 | OCTET STRING | read-only | mandatory |
| mauStatusOutputOpticalPower OBJECT-TYPE Optical input power level. Unit is in dBm e.g. -2.05dBm | 1.3.6.1.4.1.11606.6.2.6 | OCTET STRING | read-only | mandatory |
| mauStatusRFOutputPower OBJECT-TYPE Total RF output power level. Unit is in dBmV e.g. 41.23dBmV total or 25.00dBmV/Ch@42Ch. | 1.3.6.1.4.1.11606.6.2.7 | OCTET STRING | read-only | mandatory |
| mauStatusTemperature OBJECT-TYPE Module internal temperature. Unit is in Degree Celsius e.g. 29.25C | 1.3.6.1.4.1.11606.6.2.8 | OCTET STRING | read-only | mandatory |
| mauStatusLid OBJECT-TYPE Device lid open/close status | 1.3.6.1.4.1.11606.6.2.9 | TypeTamper | read-only | mandatory |
| mauStatusONUInstalled OBJECT-TYPE EPON-ONU installed status. | 1.3.6.1.4.1.11606.6.2.10 | TypeYesNo | read-only | mandatory |
| mauStatusMOCAInstalled OBJECT-TYPE MOCA installed status. | 1.3.6.1.4.1.11606.6.2.11 | TypeYesNo | read-only | mandatory |
| mauStatusPLCInstalled OBJECT-TYPE PLC installed status. | 1.3.6.1.4.1.11606.6.2.12 | TypeYesNo | read-only | mandatory |
| mauStatusLED OBJECT-TYPE Status LED | 1.3.6.1.4.1.11606.6.2.13 | TypeOnOff | read-only | mandatory |
| mauStatusGainControlLED OBJECT-TYPE Gain control LED (AGC/MGC) status. ON - AGC mode OFF - MGC mode | 1.3.6.1.4.1.11606.6.2.14 | TypeOnOff | read-only | mandatory |
| mauStatusOpticalInputHighLED OBJECT-TYPE Optical input high led indicator ON - Optical input is too high. | 1.3.6.1.4.1.11606.6.2.15 | TypeOnOff | read-only | mandatory |
| mauStatusOpticalInputLowLED OBJECT-TYPE Optical input LOW led indicator ON - Optical input is too low. | 1.3.6.1.4.1.11606.6.2.16 | TypeOnOff | read-only | mandatory |
| mauStatus5VMin OBJECT-TYPE +5V Supply MIN voltage alarm level | 1.3.6.1.4.1.11606.6.2.17 | DisplayString | read-only | mandatory |
| mauStatus5VMax OBJECT-TYPE +5V Supply MAX voltage alarm level | 1.3.6.1.4.1.11606.6.2.18 | DisplayString | read-only | mandatory |
| mauStatus12VMin OBJECT-TYPE +12V Supply MIN voltage alarm level | 1.3.6.1.4.1.11606.6.2.19 | DisplayString | read-only | mandatory |
| mauStatus12VMax OBJECT-TYPE +12V Supply MAX voltage alarm level | 1.3.6.1.4.1.11606.6.2.20 | DisplayString | read-only | mandatory |
| mauStatus24VMin OBJECT-TYPE +24V Supply MIN voltage alarm level | 1.3.6.1.4.1.11606.6.2.21 | DisplayString | read-only | mandatory |
| mauStatus24VMax OBJECT-TYPE +24V Supply MAX voltage alarm level | 1.3.6.1.4.1.11606.6.2.22 | DisplayString | read-only | mandatory |
| mauStatusInputOpticalPowerMin OBJECT-TYPE Optical Input Power MIN alarm level | 1.3.6.1.4.1.11606.6.2.23 | DisplayString | read-only | mandatory |
| mauStatusInputOpticalPowerMax OBJECT-TYPE Optical Input Power MAX alarm level | 1.3.6.1.4.1.11606.6.2.24 | DisplayString | read-only | mandatory |
| mauStatusOutputOpticalPowerMin OBJECT-TYPE Optical Output Power MIN alarm level | 1.3.6.1.4.1.11606.6.2.25 | DisplayString | read-only | mandatory |
| mauStatusOutputOpticalPowerMax OBJECT-TYPE Optical Output Power MAX alarm level | 1.3.6.1.4.1.11606.6.2.26 | DisplayString | read-only | mandatory |
| mauStatusTemperatureMin OBJECT-TYPE Temperature MIN alarm level | 1.3.6.1.4.1.11606.6.2.27 | DisplayString | read-only | mandatory |
| mauStatusTemperatureMax OBJECT-TYPE Temperature MAX alarm level | 1.3.6.1.4.1.11606.6.2.28 | DisplayString | read-only | mandatory |
| mauStatusGainControlMin OBJECT-TYPE Gain Control MIN Level | 1.3.6.1.4.1.11606.6.2.29 | DisplayString | read-only | mandatory |
| mauStatusGainControlMax OBJECT-TYPE Gain Control MAX Level | 1.3.6.1.4.1.11606.6.2.30 | DisplayString | read-only | mandatory |
| mauStatusAgcLock OBJECT-TYPE AGC lock when the controlled signal is within range. AGC unlock when agc cannot control the signal or signal is out of range for AGC to operate. | 1.3.6.1.4.1.11606.6.2.31 | TypeAGCStatus | read-only | mandatory |
| mauControl OBJECT-IDENTITY | 1.3.6.1.4.1.11606.6.3 | |||
| mauGainControlMode OBJECT-TYPE RF gain control setting. 1dB control step. Control range to be adviced. | 1.3.6.1.4.1.11606.6.3.1 | TypeGainMode | read-write | mandatory |
| mauTrapEnabled OBJECT-TYPE Indicates if this trap entry is enabled or not. | 1.3.6.1.4.1.11606.6.3.2 | INTEGER {trapDisabled(1), trapEnabled(2)} | read-write | mandatory |
| mauPrimaryCommunity OBJECT-TYPE Primary Community String to be used by agent for SNMP GET/SET for mauTrapPrimaryReceiverIPAddress | 1.3.6.1.4.1.11606.6.3.3 | DisplayString | read-write | mandatory |
| mauSecondaryCommunity OBJECT-TYPE Secondary Community String to be used by agent for SNMP GET/SET for mauTrapSecondaryReceiverIPAddress | 1.3.6.1.4.1.11606.6.3.4 | DisplayString | read-write | mandatory |
| mauPrimaryTrapReceiverIPAddress OBJECT-TYPE The primary Trap Receiver station IP address | 1.3.6.1.4.1.11606.6.3.5 | IpAddress | read-write | mandatory |
| mauSecondaryTrapReceiverIPAddress OBJECT-TYPE The secondary Trap Receiver station IP address | 1.3.6.1.4.1.11606.6.3.6 | IpAddress | read-write | mandatory |
| mauTraps OBJECT-IDENTITY | 1.3.6.1.4.1.11606.6.4 | |||
| mauTrapMessageDescr OBJECT-TYPE | 1.3.6.1.4.1.11606.6.4.1 | DisplayString | read-write | mandatory |
| lte153 OBJECT-IDENTITY | 1.3.6.1.4.1.11606.7 | |||
| lte153Laser OBJECT-IDENTITY | 1.3.6.1.4.1.11606.7.1 | |||
| tagID OBJECT-TYPE Displays the tag name of the device in human-readable format as set by user. | 1.3.6.1.4.1.11606.7.1.1 | OCTET STRING (SIZE(0..23)) | read-write | current |
| modelNumber OBJECT-TYPE Displays the name of the device model number in human-readable format as set from the factory. | 1.3.6.1.4.1.11606.7.1.2 | OCTET STRING (SIZE(0..23)) | read-only | current |
| mfgDate OBJECT-TYPE Displays the manufacturing date in human-readable format as set from the factory. | 1.3.6.1.4.1.11606.7.1.3 | OCTET STRING (SIZE(0..23)) | read-only | current |
| serialNum OBJECT-TYPE Displays the serial number in human-readable format as set from the factory. | 1.3.6.1.4.1.11606.7.1.4 | OCTET STRING (SIZE(0..23)) | read-only | current |
| firmwareRev OBJECT-TYPE Displays the software revision of the device in human-readable format. | 1.3.6.1.4.1.11606.7.1.5 | OCTET STRING (SIZE(0..23)) | read-only | current |
| engRev OBJECT-TYPE Displays the engineering revision in human-readable format as set from the factory. | 1.3.6.1.4.1.11606.7.1.6 | OCTET STRING (SIZE(0..23)) | read-only | current |
| systemTemp OBJECT-TYPE Returns the unit temperature. | 1.3.6.1.4.1.11606.7.1.7 | Integer32 (-500..1200) | read-only | current |
| laserCurrent OBJECT-TYPE Returns measured laser bias current. | 1.3.6.1.4.1.11606.7.1.8 | Integer32 (0..1250) | read-only | current |
| laserTemperature OBJECT-TYPE Returns the measured laser temperature. | 1.3.6.1.4.1.11606.7.1.9 | Integer32 (-500..800) | read-only | current |
| inputRFLevel OBJECT-TYPE Returns the input RF level. | 1.3.6.1.4.1.11606.7.1.10 | Integer32 (-1000..100) | read-only | current |
| compositeRFLevel OBJECT-TYPE Returns the measured composite RF level. | 1.3.6.1.4.1.11606.7.1.11 | Integer32 (-1000..100) | read-only | current |
| opticalPowerOut1 OBJECT-TYPE Returns the optical power output for port 1. | 1.3.6.1.4.1.11606.7.1.12 | Integer32 (-1000..200) | read-only | current |
| opticalPowerOut2 OBJECT-TYPE Returns the optical power output for port 2. | 1.3.6.1.4.1.11606.7.1.13 | Integer32 (-1000..200) | read-only | current |
| tecCurrent OBJECT-TYPE Returns the current of thermoelectric cooler inside the laser asssembly. | 1.3.6.1.4.1.11606.7.1.14 | Integer32 (-25000..25000) | read-only | current |
| attenuationSet OBJECT-TYPE Manual mode RF attenuator setpoint. | 1.3.6.1.4.1.11606.7.1.15 | Integer32 (-70..30) | read-write | current |
| omiSetpoint OBJECT-TYPE Optical modulation index is implemented for CW or Video AGC modes as RF attenuator setpoint. | 1.3.6.1.4.1.11606.7.1.16 | Integer32 (-30..30) | read-write | current |
| agcMode OBJECT-TYPE Returns the AGC mode. | 1.3.6.1.4.1.11606.7.1.17 | INTEGER {undefined(0), manual(1), cw(2), video(3), invalidMode(4)} | read-write | current |
| sbsSuppression OBJECT-TYPE SBS suppression level. | 1.3.6.1.4.1.11606.7.1.18 | Integer32 (140..180) | read-write | current |
| fiberDispersionCntl OBJECT-TYPE Fiber dispersion compensation On/Off control. | 1.3.6.1.4.1.11606.7.1.19 | INTEGER {undefined(0), off(1), on(2)} | read-write | current |
| fiberDispersionGain OBJECT-TYPE Fiber dispersion gain compensation. | 1.3.6.1.4.1.11606.7.1.20 | Integer32 (-40..40) | read-write | current |
| fiberDispersionPhase OBJECT-TYPE Fiber dispersion phase compensation. | 1.3.6.1.4.1.11606.7.1.21 | Integer32 (-40..40) | read-write | current |
| fiberDispersionSlope OBJECT-TYPE Fiber dispersion slope compensation. | 1.3.6.1.4.1.11606.7.1.22 | Integer32 (-40..40) | read-write | current |
| laserOnOff OBJECT-TYPE returns the active laser On/Off status. | 1.3.6.1.4.1.11606.7.1.23 | INTEGER {undefined(0), off(1), on(2)} | read-only | current |
| keyswitch OBJECT-TYPE Returns the status of the front panel keyswitch. | 1.3.6.1.4.1.11606.7.1.24 | INTEGER {undefined(0), off(1), on(2)} | read-only | current |
| remoteLaserControl OBJECT-TYPE Remote laser On/Off control. | 1.3.6.1.4.1.11606.7.1.25 | INTEGER {undefined(0), off(1), on(2)} | read-write | current |
| resetCause OBJECT-TYPE This object reports the cause of the last reset. | 1.3.6.1.4.1.11606.7.1.26 | INTEGER {undefined(0), other(1), powerup(2), command(3), watchdog(4), craft(5)} | read-only | current |
| resetControl OBJECT-TYPE This object is used to reset the transmitter module by writing a 1 to it. Other values written to the object have no effect. Reading the object returns a 1 and has no effect on the module. | 1.3.6.1.4.1.11606.7.1.27 | INTEGER {undefined(0), reset(1)} | read-write | current |
| sbs2GHzPower OBJECT-TYPE 2GHz SBS output power level. | 1.3.6.1.4.1.11606.7.1.28 | Integer32 (-300..300) | read-only | current |
| sbs6GHzPower OBJECT-TYPE 6GHz SBS output power level. | 1.3.6.1.4.1.11606.7.1.29 | Integer32 (-300..300) | read-only | current |
| monitor5v OBJECT-TYPE Returns the measured value of the +5V supply. | 1.3.6.1.4.1.11606.7.1.30 | Integer32 (0..70) | read-only | current |
| monitor12v OBJECT-TYPE Returns the measured value of the +12V supply. | 1.3.6.1.4.1.11606.7.1.31 | Integer32 (0..150) | read-only | current |
| monitor24v OBJECT-TYPE Returns the measured value of the +24V supply. | 1.3.6.1.4.1.11606.7.1.32 | Integer32 (0..300) | read-only | current |
| monitorM5v OBJECT-TYPE Returns the measured value of the -5V supply. | 1.3.6.1.4.1.11606.7.1.33 | Integer32 (-70..70) | read-only | current |
| monitorM12v OBJECT-TYPE Returns the measured value of the -12V supply. | 1.3.6.1.4.1.11606.7.1.34 | Integer32 (-150..150) | read-only | current |
| unitStatusEnable OBJECT-TYPE Indicates the unit status alarm enable. This value is bit encoded therefore it is capable of indicating multiple alarm enable conditions. The bits are defined as follows: 0 1 2 3 4 5 6 7 +-------+-------+-------+-------+-------+-------+-------+-------+ |System |System | Laser | Laser | Laser | Laser | Input | Input | | Temp | Temp |Current|Current| Temp | Temp | RF | RF | | High | Low | High | Low | High | Low | Level | Level | | | | | | | | High | Low | +-------+-------+-------+-------+-------+-------+-------+-------+ 8 9 10 11 12 13 14 15 +-------+-------+-------+-------+-------+-------+-------+-------+ |Optical|Optical| TEC | AGC |Key in |Remote | | | | Power | Power |Current| Unlock| Off | Off | | | | Out | Out | High | |Position Mode | | | | High | Low | | | | Set | | | +-------+-------+-------+-------+-------+-------+-------+-------+ | 1.3.6.1.4.1.11606.7.1.35 | Bits {systemTempHigh(0), systemTempLow(1), laserCurrentHigh(2), laserCurrentLow(3), laserTempHigh(4), laserTempLow(5), inputRFHigh(6), inputRFLow(7), opticalPowerHigh(8), opticalPowerLow(9), tecCurrentHigh(10), agcUnlock(11), keyInOffPosition(12), remoteOffModeSet(13)} | read-write | current |
| unitStatusMajor OBJECT-TYPE Returns a bit mapped status word where each bit set (as defined below) indicates a specific active alarm: 0 1 2 3 4 5 6 7 +-------+-------+-------+-------+-------+-------+-------+-------+ |System |System | Laser | Laser | Laser | Laser | Input | Input | | Temp | Temp |Current|Current| Temp | Temp | RF | RF | | High | Low | High | Low | High | Low | Level | Level | | | | | | | | High | Low | +-------+-------+-------+-------+-------+-------+-------+-------+ 8 9 10 11 12 13 14 15 +-------+-------+-------+-------+-------+-------+-------+-------+ |Optical|Optical| TEC | AGC |Key in |Remote | | | | Power | Power |Current| Unlock| Off | Off | | | | Out | Out | High | |Position Mode | | | | | | | | | Set | | | +-------+-------+-------+-------+-------+-------+-------+-------+ | 1.3.6.1.4.1.11606.7.1.36 | Bits {systemTempHigh(0), systemTempLow(1), laserCurrentHigh(2), laserCurrentLow(3), laserTempHigh(4), laserTempLow(5), inputRFHigh(6), inputRFLow(7), opticalPowerHigh(8), opticalPowerLow(9), tecCurrentHigh(10), agcUnlock(11), keyInOffPosition(12), remoteOffModeSet(13)} | read-only | current |
| unitStatusMinor OBJECT-TYPE Returns a bit mapped status word where each bit set (as defined below) indicates a specific active warning: 0 1 2 3 4 5 6 7 +-------+-------+-------+-------+-------+-------+-------+-------+ |System |System | Laser | Laser | Laser | Laser | Input | Input | | Temp | Temp |Current|Current| Temp | Temp | RF | RF | | High | Low | High | Low | High | Low | Level | Level | | | | | | | | High | Low | +-------+-------+-------+-------+-------+-------+-------+-------+ 8 9 10 11 12 13 14 15 +-------+-------+-------+-------+-------+-------+-------+-------+ |Optical|Optical| TEC | AGC |Key in |Remote | | | | Power | Power |Current| Unlock| Off | Off | | | | Out | Out | High | |Position Mode | | | | High | Low | | | | Set | | | +-------+-------+-------+-------+-------+-------+-------+-------+ | 1.3.6.1.4.1.11606.7.1.37 | Bits {systemTempHigh(0), systemTempLow(1), laserCurrentHigh(2), laserCurrentLow(3), laserTempHigh(4), laserTempLow(5), inputRFHigh(6), inputRFLow(7), opticalPowerHigh(8), opticalPowerLow(9), tecCurrentHigh(10), agcUnlock(11), keyInOffPosition(12), remoteOffModeSet(13)} | read-only | current |
| unitStatusHistory OBJECT-TYPE Returns a bit mapped status word where each bit set (as defined below) indicates a an alarm had occurred since the last power up or clear: 0 1 2 3 4 5 6 7 +-------+-------+-------+-------+-------+-------+-------+-------+ |System |System | Laser | Laser | Laser | Laser | Input | Input | | Temp | Temp |Current|Current| Temp | Temp | RF | RF | | High | Low | High | Low | High | Low | Level | Level | | | | | | | | High | Low | +-------+-------+-------+-------+-------+-------+-------+-------+ 8 9 10 11 12 13 14 15 +-------+-------+-------+-------+-------+-------+-------+-------+ |Optical|Optical| TEC | AGC |Key in |Remote | | | | Power | Power |Current| Unlock| Off | Off | | | | Out | Out | High | |Position Mode | | | | High | Low | | | | Set | | | +-------+-------+-------+-------+-------+-------+-------+-------+ Clear status history by writing a value of 0. | 1.3.6.1.4.1.11606.7.1.38 | Bits {systemTempHigh(0), systemTempLow(1), laserCurrentHigh(2), laserCurrentLow(3), laserTempHigh(4), laserTempLow(5), inputRFHigh(6), inputRFLow(7), opticalPowerHigh(8), opticalPowerLow(9), tecCurrentHigh(10), agcUnlock(11), keyInOffPosition(12), remoteOffModeSet(13)} | read-write | current |
| miscStatusEnable OBJECT-TYPE Indicates the miscellaneous status alarm enable. This value is bit encoded therefore it is capable of indicating multiple alarm enable conditions. The bits are defined as follows: 0 1 2 3 4 5 6 7 +-------+-------+-------+-------+-------+-------+-------+-------+ | 2 GHz | 2 GHz | 6 GHz | 6 GHz |System |System |System |System | | SBS | SBS | SBS | SBS | +5V | +5V | +12V | +12V | | Power | Power | Power | Power | Power | Power | Power | Power | | High | Low | High | Low | High | Low | High | Low | +-------+-------+-------+-------+-------+-------+-------+-------+ 8 9 10 11 12 13 14 15 +-------+-------+-------+-------+-------+-------+-------+-------+ |System |System |System |System |System |System | Comm | | | +24V | +24V | -5V | -5V | -12V | -12V |Failure| | | Power | Power | Power | Power | Power | Power | | | | High | Low | High | Low | High | Low | | | +-------+-------+-------+-------+-------+-------+-------+-------+ 16 17 18 19 20 21 22 23 +-------+-------+-------+-------+-------+-------+-------+-------+ | Power | Power |Cooling|Cooling| | | | | | Supply| Supply| Fan | Fan | | | | | | A | B | A | B | | | | | |Failure|Failure|Failure|Failure| | | | | +-------+-------+-------+-------+-------+-------+-------+-------+ | 1.3.6.1.4.1.11606.7.1.39 | Bits {sbs2GHzPowerHigh(0), sbs2GHzPowerLow(1), sbs6GHzPowerHigh(2), sbs6GHzPowerLow(3), system5VPowerHigh(4), system5VPowerLow(5), system12VPowerHigh(6), system12VPowerLow(7), system24VPowerHigh(8), system24VPowerLow(9), systemM5VPowerHigh(10), systemM5VPowerLow(11), systemM12VPowerHigh(12), systemM12VPowerLow(13), communicationFailure(14), powerSupplyAFailure(16), powerSupplyBFailure(17), coolingFanAFailure(18), coolingFanBFailure(19)} | read-write | current |
| miscStatusMajor OBJECT-TYPE Returns a bit mapped status word where each bit set (as defined below) indicates a specific active alarm: 0 1 2 3 4 5 6 7 +-------+-------+-------+-------+-------+-------+-------+-------+ | 2 GHz | 2 GHz | 6 GHz | 6 GHz |System |System |System |System | | SBS | SBS | SBS | SBS | +5V | +5V | +12V | +12V | | Power | Power | Power | Power | Power | Power | Power | Power | | High | Low | High | Low | High | Low | High | Low | +-------+-------+-------+-------+-------+-------+-------+-------+ 8 9 10 11 12 13 14 15 +-------+-------+-------+-------+-------+-------+-------+-------+ |System |System |System |System |System |System | Comm |Power | | +24V | +24V | -5V | -5V | -12V | -12V |Failure|Supply | | Power | Power | Power | Power | Power | Power | |Failure| | High | Low | High | Low | High | Low | | | +-------+-------+-------+-------+-------+-------+-------+-------+ 16 17 18 19 20 21 22 23 +-------+-------+-------+-------+-------+-------+-------+-------+ | Power | Power |Cooling|Cooling| | | | | | Supply| Supply| Fan | Fan | | | | | | A | B | A | B | | | | | |Failure|Failure|Failure|Failure| | | | | +-------+-------+-------+-------+-------+-------+-------+-------+ | 1.3.6.1.4.1.11606.7.1.40 | Bits {sbs2GHzPowerHigh(0), sbs2GHzPowerLow(1), sbs6GHzPowerHigh(2), sbs6GHzPowerLow(3), system5VPowerHigh(4), system5VPowerLow(5), system12VPowerHigh(6), system12VPowerLow(7), system24VPowerHigh(8), system24VPowerLow(9), systemM5VPowerHigh(10), systemM5VPowerLow(11), systemM12VPowerHigh(12), systemM12VPowerLow(13), communicationFailure(14), powerSupplyAFailure(16), powerSupplyBFailure(17), coolingFanAFailure(18), coolingFanBFailure(19)} | read-only | current |
| miscStatusMinor OBJECT-TYPE Returns a bit mapped status word where each bit set (as defined below) indicates a specific active warning: 0 1 2 3 4 5 6 7 +-------+-------+-------+-------+-------+-------+-------+-------+ | 2 GHz | 2 GHz | 6 GHz | 6 GHz |System |System |System |System | | SBS | SBS | SBS | SBS | +5V | +5V | +12V | +12V | | Power | Power | Power | Power | Power | Power | Power | Power | | High | Low | High | Low | High | Low | High | Low | +-------+-------+-------+-------+-------+-------+-------+-------+ 8 9 10 11 12 13 14 15 +-------+-------+-------+-------+-------+-------+-------+-------+ |System |System |System |System |System |System | Comm |Power | | +24V | +24V | -5V | -5V | -12V | -12V |Failure|Supply | | Power | Power | Power | Power | Power | Power | |Failure| | High | Low | High | Low | High | Low | | | +-------+-------+-------+-------+-------+-------+-------+-------+ 16 17 18 19 20 21 22 23 +-------+-------+-------+-------+-------+-------+-------+-------+ | Power | Power |Cooling|Cooling| | | | | | Supply| Supply| Fan | Fan | | | | | | A | B | A | B | | | | | |Failure|Failure|Failure|Failure| | | | | +-------+-------+-------+-------+-------+-------+-------+-------+ | 1.3.6.1.4.1.11606.7.1.41 | Bits {sbs2GHzPowerHigh(0), sbs2GHzPowerLow(1), sbs6GHzPowerHigh(2), sbs6GHzPowerLow(3), system5VPowerHigh(4), system5VPowerLow(5), system12VPowerHigh(6), system12VPowerLow(7), system24VPowerHigh(8), system24VPowerLow(9), systemM5VPowerHigh(10), systemM5VPowerLow(11), systemM12VPowerHigh(12), systemM12VPowerLow(13), communicationFailure(14), powerSupplyAFailure(16), powerSupplyBFailure(17), coolingFanAFailure(18), coolingFanBFailure(19)} | read-only | current |
| miscStatusHistory OBJECT-TYPE Returns a bit mapped status word where each bit set (as defined below) indicates a an alarm had occurred since the last power up or clear: 0 1 2 3 4 5 6 7 +-------+-------+-------+-------+-------+-------+-------+-------+ | 2 GHz | 2 GHz | 6 GHz | 6 GHz |System |System |System |System | | SBS | SBS | SBS | SBS | +5V | +5V | +12V | +12V | | Power | Power | Power | Power | Power | Power | Power | Power | | High | Low | High | Low | High | Low | High | Low | +-------+-------+-------+-------+-------+-------+-------+-------+ 8 9 10 11 12 13 14 15 +-------+-------+-------+-------+-------+-------+-------+-------+ |System |System |System |System |System |System | Comm |Power | | +24V | +24V | -5V | -5V | -12V | -12V |Failure|Supply | | Power | Power | Power | Power | Power | Power | |Failure| | High | Low | High | Low | High | Low | | | +-------+-------+-------+-------+-------+-------+-------+-------+ 16 17 18 19 20 21 22 23 +-------+-------+-------+-------+-------+-------+-------+-------+ | Power | Power |Cooling|Cooling| | | | | | Supply| Supply| Fan | Fan | | | | | | A | B | A | B | | | | | |Failure|Failure|Failure|Failure| | | | | +-------+-------+-------+-------+-------+-------+-------+-------+ Clear status history by writing a value of 0. | 1.3.6.1.4.1.11606.7.1.42 | Bits {sbs2GHzPowerHigh(0), sbs2GHzPowerLow(1), sbs6GHzPowerHigh(2), sbs6GHzPowerLow(3), system5VPowerHigh(4), system5VPowerLow(5), system12VPowerHigh(6), system12VPowerLow(7), system24VPowerHigh(8), system24VPowerLow(9), systemM5VPowerHigh(10), systemM5VPowerLow(11), systemM12VPowerHigh(12), systemM12VPowerLow(13), communicationFailure(14), powerSupplyAFailure(16), powerSupplyBFailure(17), coolingFanAFailure(18), coolingFanBFailure(19)} | read-write | current |
| frontPanelLEDStatus OBJECT-TYPE Returns a bit mapped status word where each bit set (as defined below) indicates a specific LED state: 0 1 2 3 4 5 +-------+-------+-------+-------+-------+-------+ | Laser | Laser |Status |Status |Status |LaserOn| | On | Off | Okay | Major | Minor | Rear | | | | | Alarm | Alarm | Panel | | Green | Red | Green | Red | Red | Green | +-------+-------+-------+-------+-------+-------+ | 1.3.6.1.4.1.11606.7.1.43 | Bits {laserOn(0), laserOff(1), statusOkay(2), majorAlarmActive(3), minorAlarmActive(4), laserOnRearPanel(5)} | read-only | current |
| upTime OBJECT-TYPE Returns the number of elapsed seconds since the last time the unit restarted. | 1.3.6.1.4.1.11606.7.1.44 | TimeTicks | read-only | current |
| transmitterNotificationPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.11606.7.1.45 | |||
| transmitterCommonNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.11606.7.1.45.0 | |||
| lte153PowerSupply OBJECT-IDENTITY | 1.3.6.1.4.1.11606.7.2 | |||
| powerSupplyType OBJECT-TYPE Returns the installed power supply type. single5V(1) - Single AC/DC power supply with rated output of 5V at 100W. dualRedundant5V(2) - Dual, redundant AC/DC power supplies with rated output of 5V at 100W each. single5-12-24V(3) - Single AC/DC power supply with rated outputs of 5V, +/-12V and 24V at 100W total. dualRedundant5-12-24V(4) - Dual, redundant AC/DC power supplies with rated outputs of 5V, +/-12V and 24V at 100W total. | 1.3.6.1.4.1.11606.7.2.1 | INTEGER {undefined(0), single5V(1), dualRedundant5V(2), single5-12-24V(3), dualRedundant5-12-24V(4)} | read-only | current |
| powerSupplyTemp OBJECT-TYPE Returns the power supply regulator temperature. | 1.3.6.1.4.1.11606.7.2.2 | Integer32 (-500..1200) | read-only | current |
| powerSupplyStatusA OBJECT-TYPE Returns the operating status of power supply A. | 1.3.6.1.4.1.11606.7.2.3 | INTEGER {undefined(0), nominal(1), failure(2), notInstalled(3)} | read-only | current |
| powerSupplyStatusB OBJECT-TYPE Returns the operating status of power supply B. | 1.3.6.1.4.1.11606.7.2.4 | INTEGER {undefined(0), nominal(1), failure(2), notInstalled(3)} | read-only | current |
| coolingFanA OBJECT-TYPE Returns the operating status of chassis cooling fan A. | 1.3.6.1.4.1.11606.7.2.5 | INTEGER {undefined(0), nominal(1), failure(2), notInstalled(3)} | read-only | current |
| coolingFanB OBJECT-TYPE Returns the operating status of chassis cooling fan B. | 1.3.6.1.4.1.11606.7.2.6 | INTEGER {undefined(0), nominal(1), failure(2), notInstalled(3)} | read-only | current |
| powerSupplyNotificationPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.11606.7.2.8 | |||
| powerSupplyNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.11606.7.2.8.0 |
Notifications
| Name | OID | Status |
|---|---|---|
| module15 NOTIFICATION-TYPE PBN Module 1 Param 5 Alarm notification | 1.3.6.1.4.1.11606.0.0.15 | |
| module16 NOTIFICATION-TYPE PBN Module 1 Param 6 Alarm notification | 1.3.6.1.4.1.11606.0.0.16 | |
| module17 NOTIFICATION-TYPE PBN Module 1 Param 7 Alarm notification | 1.3.6.1.4.1.11606.0.0.17 | |
| module18 NOTIFICATION-TYPE PBN Module 1 Param 8 Alarm notification | 1.3.6.1.4.1.11606.0.0.18 | |
| module19 NOTIFICATION-TYPE PBN Module 1 Param 9 notification | 1.3.6.1.4.1.11606.0.0.19 | |
| module25 NOTIFICATION-TYPE PBN Module 2 Param 5 notification | 1.3.6.1.4.1.11606.0.0.25 | |
| module26 NOTIFICATION-TYPE PBN Module 2 Param 6 notification | 1.3.6.1.4.1.11606.0.0.26 | |
| module27 NOTIFICATION-TYPE PBN Module 2 Param 7 notification | 1.3.6.1.4.1.11606.0.0.27 | |
| module28 NOTIFICATION-TYPE PBN Module 2 Param 8 notification | 1.3.6.1.4.1.11606.0.0.28 | |
| module29 NOTIFICATION-TYPE PBN Module 2 Param 9 notification | 1.3.6.1.4.1.11606.0.0.29 | |
| module35 NOTIFICATION-TYPE PBN Module 3 Param 5 notification | 1.3.6.1.4.1.11606.0.0.35 | |
| module36 NOTIFICATION-TYPE PBN Module 3 Param 6 notification | 1.3.6.1.4.1.11606.0.0.36 | |
| module37 NOTIFICATION-TYPE PBN Module 3 Param 7 notification | 1.3.6.1.4.1.11606.0.0.37 | |
| module38 NOTIFICATION-TYPE PBN Module 3 Param 8 notification | 1.3.6.1.4.1.11606.0.0.38 | |
| module39 NOTIFICATION-TYPE PBN Module 3 Param 9 notification | 1.3.6.1.4.1.11606.0.0.39 | |
| module45 NOTIFICATION-TYPE PBN Module 4 Param 5 notification | 1.3.6.1.4.1.11606.0.0.45 | |
| module46 NOTIFICATION-TYPE PBN Module 4 Param 6 notification | 1.3.6.1.4.1.11606.0.0.46 | |
| module47 NOTIFICATION-TYPE PBN Module 4 Param 7 notification | 1.3.6.1.4.1.11606.0.0.47 | |
| module48 NOTIFICATION-TYPE PBN Module 4 Param 8 notification | 1.3.6.1.4.1.11606.0.0.48 | |
| module49 NOTIFICATION-TYPE PBN Module 4 Param 9 notification | 1.3.6.1.4.1.11606.0.0.49 | |
| module110 NOTIFICATION-TYPE PBN Module 1 Param 10 notification | 1.3.6.1.4.1.11606.0.0.110 | |
| module111 NOTIFICATION-TYPE PBN Module 1 Param 11 notification | 1.3.6.1.4.1.11606.0.0.111 | |
| module112 NOTIFICATION-TYPE PBN Module 1 Param 12 notification | 1.3.6.1.4.1.11606.0.0.112 | |
| module113 NOTIFICATION-TYPE PBN Module 1 Param 13 notification | 1.3.6.1.4.1.11606.0.0.113 | |
| module114 NOTIFICATION-TYPE PBN Module 1 Param 14 notification | 1.3.6.1.4.1.11606.0.0.114 | |
| module115 NOTIFICATION-TYPE PBN Module 1 Param 15 notification | 1.3.6.1.4.1.11606.0.0.115 | |
| module116 NOTIFICATION-TYPE PBN Module 1 Param 16 notification | 1.3.6.1.4.1.11606.0.0.116 | |
| module117 NOTIFICATION-TYPE PBN Module 1 Param 17 notification | 1.3.6.1.4.1.11606.0.0.117 | |
| module118 NOTIFICATION-TYPE PBN Module 1 Param 18 notification | 1.3.6.1.4.1.11606.0.0.118 | |
| module119 NOTIFICATION-TYPE PBN Module 1 Param 19 notification | 1.3.6.1.4.1.11606.0.0.119 | |
| module120 NOTIFICATION-TYPE PBN Module 1 Param 20 notification | 1.3.6.1.4.1.11606.0.0.120 | |
| module121 NOTIFICATION-TYPE PBN Module 1 Param 21 notification | 1.3.6.1.4.1.11606.0.0.121 | |
| module122 NOTIFICATION-TYPE PBN Module 1 Param 22 notification | 1.3.6.1.4.1.11606.0.0.122 | |
| module123 NOTIFICATION-TYPE PBN Module 1 Param 23 notification | 1.3.6.1.4.1.11606.0.0.123 | |
| module124 NOTIFICATION-TYPE PBN Module 1 Param 24 notification | 1.3.6.1.4.1.11606.0.0.124 | |
| module125 NOTIFICATION-TYPE PBN Module 1 Param 25 notification | 1.3.6.1.4.1.11606.0.0.125 | |
| module126 NOTIFICATION-TYPE PBN Module 1 Param 26 notification | 1.3.6.1.4.1.11606.0.0.126 | |
| module127 NOTIFICATION-TYPE PBN Module 1 Param 27 notification | 1.3.6.1.4.1.11606.0.0.127 | |
| module128 NOTIFICATION-TYPE PBN Module 1 Param 28 notification | 1.3.6.1.4.1.11606.0.0.128 | |
| module129 NOTIFICATION-TYPE PBN Module 1 Param 29 notification | 1.3.6.1.4.1.11606.0.0.129 | |
| module130 NOTIFICATION-TYPE PBN Module 1 Param 30 notification | 1.3.6.1.4.1.11606.0.0.130 | |
| module131 NOTIFICATION-TYPE PBN Module 1 Param 31 notification | 1.3.6.1.4.1.11606.0.0.131 | |
| module210 NOTIFICATION-TYPE PBN Module 2 Param 10 notification | 1.3.6.1.4.1.11606.0.0.210 | |
| module211 NOTIFICATION-TYPE PBN Module 2 Param 11 notification | 1.3.6.1.4.1.11606.0.0.211 | |
| module212 NOTIFICATION-TYPE PBN Module 2 Param 12 notification | 1.3.6.1.4.1.11606.0.0.212 | |
| module213 NOTIFICATION-TYPE PBN Module 2 Param 13 notification | 1.3.6.1.4.1.11606.0.0.213 | |
| module214 NOTIFICATION-TYPE PBN Module 2 Param 14 notification | 1.3.6.1.4.1.11606.0.0.214 | |
| module215 NOTIFICATION-TYPE PBN Module 2 Param 15 notification | 1.3.6.1.4.1.11606.0.0.215 | |
| module216 NOTIFICATION-TYPE PBN Module 2 Param 16 notification | 1.3.6.1.4.1.11606.0.0.216 | |
| module217 NOTIFICATION-TYPE PBN Module 2 Param 17 notification | 1.3.6.1.4.1.11606.0.0.217 | |
| module218 NOTIFICATION-TYPE PBN Module 2 Param 18 notification | 1.3.6.1.4.1.11606.0.0.218 | |
| module219 NOTIFICATION-TYPE PBN Module 2 Param 19 Alarm notification | 1.3.6.1.4.1.11606.0.0.219 | |
| module220 NOTIFICATION-TYPE PBN Module 2 Param 20 notification | 1.3.6.1.4.1.11606.0.0.220 | |
| module221 NOTIFICATION-TYPE PBN Module 2 Param 21 notification | 1.3.6.1.4.1.11606.0.0.221 | |
| module222 NOTIFICATION-TYPE PBN Module 2 Param 22 notification | 1.3.6.1.4.1.11606.0.0.222 | |
| module223 NOTIFICATION-TYPE PBN Module 2 Param 23 notification | 1.3.6.1.4.1.11606.0.0.223 | |
| module224 NOTIFICATION-TYPE PBN Module 2 Param 24 notification | 1.3.6.1.4.1.11606.0.0.224 | |
| module225 NOTIFICATION-TYPE PBN Module 2 Param 25 notification | 1.3.6.1.4.1.11606.0.0.225 | |
| module226 NOTIFICATION-TYPE PBN Module 2 Param 26 notification | 1.3.6.1.4.1.11606.0.0.226 | |
| module227 NOTIFICATION-TYPE PBN Module 2 Param 27 notification | 1.3.6.1.4.1.11606.0.0.227 | |
| module228 NOTIFICATION-TYPE PBN Module 2 Param 28 notification | 1.3.6.1.4.1.11606.0.0.228 | |
| module229 NOTIFICATION-TYPE PBN Module 2 Param 29 notification | 1.3.6.1.4.1.11606.0.0.229 | |
| module230 NOTIFICATION-TYPE PBN Module 2 Param 30 notification | 1.3.6.1.4.1.11606.0.0.230 | |
| module231 NOTIFICATION-TYPE PBN Module 2 Param 31 notification | 1.3.6.1.4.1.11606.0.0.231 | |
| module310 NOTIFICATION-TYPE PBN Module 3 Param 10 notification | 1.3.6.1.4.1.11606.0.0.310 | |
| module311 NOTIFICATION-TYPE PBN Module 3 Param 11 notification | 1.3.6.1.4.1.11606.0.0.311 | |
| module312 NOTIFICATION-TYPE PBN Module 3 Param 12 notification | 1.3.6.1.4.1.11606.0.0.312 | |
| module313 NOTIFICATION-TYPE PBN Module 3 Param 13 notification | 1.3.6.1.4.1.11606.0.0.313 | |
| module314 NOTIFICATION-TYPE PBN Module 3 Param 14 notification | 1.3.6.1.4.1.11606.0.0.314 | |
| module315 NOTIFICATION-TYPE PBN Module 3 Param 15 notification | 1.3.6.1.4.1.11606.0.0.315 | |
| module316 NOTIFICATION-TYPE PBN Module 3 Param 16 notification | 1.3.6.1.4.1.11606.0.0.316 | |
| module317 NOTIFICATION-TYPE PBN Module 3 Param 17 notification | 1.3.6.1.4.1.11606.0.0.317 | |
| module318 NOTIFICATION-TYPE PBN Module 3 Param 18 notification | 1.3.6.1.4.1.11606.0.0.318 | |
| module319 NOTIFICATION-TYPE PBN Module 3 Param 19 notification | 1.3.6.1.4.1.11606.0.0.319 | |
| module320 NOTIFICATION-TYPE PBN Module 3 Param 20 notification | 1.3.6.1.4.1.11606.0.0.320 | |
| module321 NOTIFICATION-TYPE PBN Module 3 Param 21 notification | 1.3.6.1.4.1.11606.0.0.321 | |
| module322 NOTIFICATION-TYPE PBN Module 3 Param 22 notification | 1.3.6.1.4.1.11606.0.0.322 | |
| module323 NOTIFICATION-TYPE PBN Module 3 Param 23 notification | 1.3.6.1.4.1.11606.0.0.323 | |
| module324 NOTIFICATION-TYPE PBN Module 3 Param 24 notification | 1.3.6.1.4.1.11606.0.0.324 | |
| module325 NOTIFICATION-TYPE PBN Module 3 Param 25 notification | 1.3.6.1.4.1.11606.0.0.325 | |
| module326 NOTIFICATION-TYPE PBN Module 3 Param 26 notification | 1.3.6.1.4.1.11606.0.0.326 | |
| module327 NOTIFICATION-TYPE PBN Module 3 Param 27 notification | 1.3.6.1.4.1.11606.0.0.327 | |
| module328 NOTIFICATION-TYPE PBN Module 3 Param 28 notification | 1.3.6.1.4.1.11606.0.0.328 | |
| module329 NOTIFICATION-TYPE PBN Module 3 Param 29 notification | 1.3.6.1.4.1.11606.0.0.329 | |
| module330 NOTIFICATION-TYPE PBN Module 3 Param 30 notification | 1.3.6.1.4.1.11606.0.0.330 | |
| module331 NOTIFICATION-TYPE PBN Module 3 Param 31 notification | 1.3.6.1.4.1.11606.0.0.331 | |
| module410 NOTIFICATION-TYPE PBN Module 4 Param 10 notification | 1.3.6.1.4.1.11606.0.0.410 | |
| module411 NOTIFICATION-TYPE PBN Module 4 Param 11 notification | 1.3.6.1.4.1.11606.0.0.411 | |
| mauStatus5VTrap NOTIFICATION-TYPE | 1.3.6.1.4.1.11606.0.0.415 | |
| mauStatus12VTrap NOTIFICATION-TYPE | 1.3.6.1.4.1.11606.0.0.416 | |
| mauStatus24VTrap NOTIFICATION-TYPE | 1.3.6.1.4.1.11606.0.0.417 | |
| mauStatusInputOpticalPowerTrap NOTIFICATION-TYPE | 1.3.6.1.4.1.11606.0.0.418 | |
| mauStatusOutputOpticalPowerTrap NOTIFICATION-TYPE | 1.3.6.1.4.1.11606.0.0.419 | |
| mauStatusRFOutputTrap NOTIFICATION-TYPE | 1.3.6.1.4.1.11606.0.0.420 | |
| mauStatusTemperatureTrap NOTIFICATION-TYPE | 1.3.6.1.4.1.11606.0.0.421 | |
| mauStatusLidTrap NOTIFICATION-TYPE | 1.3.6.1.4.1.11606.0.0.422 | |
| cpon100ContactInput NOTIFICATION-TYPE CPON-100 Tamper alarm | 1.3.6.1.4.1.11606.2.0.0.412 | |
| cpon100sensingInput NOTIFICATION-TYPE CPON-100 Battery alarm | 1.3.6.1.4.1.11606.2.0.0.413 | |
| cpon100CATVAlarm NOTIFICATION-TYPE CPON-100 CATV alarm | 1.3.6.1.4.1.11606.2.0.0.414 | |
| transmitterNoAlarmsPresent NOTIFICATION-TYPE No alarms are present. | 1.3.6.1.4.1.11606.7.1.45.0.0 | current |
| transmitterSystemTemperatureHigh NOTIFICATION-TYPE The system temperature has exceeded its normal operating value. | 1.3.6.1.4.1.11606.7.1.45.0.1 | current |
| transmitterSystemTemperatureLow NOTIFICATION-TYPE The system temperature has exceeded its normal operating value. | 1.3.6.1.4.1.11606.7.1.45.0.2 | current |
| transmitterLaserCurrentHigh NOTIFICATION-TYPE The laser current has exceeded its normal operating value. | 1.3.6.1.4.1.11606.7.1.45.0.3 | current |
| transmitterLaserCurrentLow NOTIFICATION-TYPE The laser current has exceeded its normal operating value. | 1.3.6.1.4.1.11606.7.1.45.0.4 | current |
| transmitterLaserTemperatureHigh NOTIFICATION-TYPE The laser temperature has exceeded its normal operating value. | 1.3.6.1.4.1.11606.7.1.45.0.5 | current |
| transmitterLaserTemperatureLow NOTIFICATION-TYPE The laser temperature has exceeded its normal operating value. | 1.3.6.1.4.1.11606.7.1.45.0.6 | current |
| transmitterInputRFLevelHigh NOTIFICATION-TYPE The input RF level has exceeded its normal operating value. | 1.3.6.1.4.1.11606.7.1.45.0.7 | current |
| transmitterInputRFLevelLow NOTIFICATION-TYPE The input RF level has exceeded its normal operating value. | 1.3.6.1.4.1.11606.7.1.45.0.8 | current |
| transmitterOpticalPowerOutputHigh NOTIFICATION-TYPE The optical power output has exceeded its normal operating value. | 1.3.6.1.4.1.11606.7.1.45.0.9 | current |
| transmitterOpticalPowerOutputLow NOTIFICATION-TYPE The optical power output has exceeded its normal operating value. | 1.3.6.1.4.1.11606.7.1.45.0.10 | current |
| transmitterTECCurrentHigh NOTIFICATION-TYPE The thermoelectric cooler current has exceeded its normal operating value. | 1.3.6.1.4.1.11606.7.1.45.0.11 | current |
| transmitterAGCUnlocked NOTIFICATION-TYPE The RF attenuator automatic gain control (AGC) is outside its normal operating range. | 1.3.6.1.4.1.11606.7.1.45.0.12 | current |
| transmitterKeySwitchOffPosition NOTIFICATION-TYPE The key switch is in the OFF position. | 1.3.6.1.4.1.11606.7.1.45.0.13 | current |
| transmitterRemoteLaserOffMode NOTIFICATION-TYPE The remote laser control is commanded to be in OFF mode. | 1.3.6.1.4.1.11606.7.1.45.0.14 | current |
| transmitter2GHzSBSPowerHigh NOTIFICATION-TYPE The 2GHz SBS output power has exceeded its normal operating value. | 1.3.6.1.4.1.11606.7.1.45.0.15 | current |
| transmitter2GHzSBSPowerLow NOTIFICATION-TYPE The 2GHz SBS output power has exceeded its normal operating value. | 1.3.6.1.4.1.11606.7.1.45.0.16 | current |
| transmitter6GHzSBSPowerHigh NOTIFICATION-TYPE The 6GHz SBS output power has exceeded its normal operating value. | 1.3.6.1.4.1.11606.7.1.45.0.17 | current |
| transmitter6GHzSBSPowerLow NOTIFICATION-TYPE The 6GHz SBS output power has exceeded its normal operating value. | 1.3.6.1.4.1.11606.7.1.45.0.18 | current |
| transmitterSystem5VPowerHigh NOTIFICATION-TYPE The system +5V power supply has exceeded its normal operating value. | 1.3.6.1.4.1.11606.7.1.45.0.19 | current |
| transmitterSystem5VPowerLow NOTIFICATION-TYPE The system +5V power supply has exceeded its normal operating value. | 1.3.6.1.4.1.11606.7.1.45.0.20 | current |
| transmitterSystem12VPowerHigh NOTIFICATION-TYPE The system +12V power supply has exceeded its normal operating value. | 1.3.6.1.4.1.11606.7.1.45.0.21 | current |
| transmitterSystem12VPowerLow NOTIFICATION-TYPE The system +12V power supply has exceeded its normal operating value. | 1.3.6.1.4.1.11606.7.1.45.0.22 | current |
| transmitterSystem24VPowerHigh NOTIFICATION-TYPE The system +24V power supply has exceeded its normal operating value. | 1.3.6.1.4.1.11606.7.1.45.0.23 | current |
| transmitterSystem24VPowerLow NOTIFICATION-TYPE The system +24V power supply has exceeded its normal operating value. | 1.3.6.1.4.1.11606.7.1.45.0.24 | current |
| transmitterSystemM5VPowerHigh NOTIFICATION-TYPE The system -5V power supply has exceeded its normal operating value. | 1.3.6.1.4.1.11606.7.1.45.0.25 | current |
| transmitterSystemM5VPowerLow NOTIFICATION-TYPE The system -5V power supply has exceeded its normal operating value. | 1.3.6.1.4.1.11606.7.1.45.0.26 | current |
| transmitterSystemM12VPowerHigh NOTIFICATION-TYPE The system -12V power supply has exceeded its normal operating value. | 1.3.6.1.4.1.11606.7.1.45.0.27 | current |
| transmitterSystemM12VPowerLow NOTIFICATION-TYPE The system -12V power supply has exceeded its normal operating value. | 1.3.6.1.4.1.11606.7.1.45.0.28 | current |
| transmitterCommunicationFailure NOTIFICATION-TYPE A failure was detected with the internal network communication interface. | 1.3.6.1.4.1.11606.7.1.45.0.29 | current |
| transmitterPowerSupplyAFailure NOTIFICATION-TYPE A failure was detected with power supply module A. | 1.3.6.1.4.1.11606.7.1.45.0.30 | current |
| transmitterPowerSupplyBFailure NOTIFICATION-TYPE A failure was detected with power supply module B. | 1.3.6.1.4.1.11606.7.1.45.0.31 | current |
| transmitterCoolingFanAFailure NOTIFICATION-TYPE A failure was detected with cooling fan A. | 1.3.6.1.4.1.11606.7.1.45.0.32 | current |
| transmitterCoolingFanBFailure NOTIFICATION-TYPE A failure was detected with cooling fan B. | 1.3.6.1.4.1.11606.7.1.45.0.33 | current |
| powerSupplyNoAlarmsPresent NOTIFICATION-TYPE No alarms are present. | 1.3.6.1.4.1.11606.7.2.8.0.0 | current |
| powerSupplyPowerSupplyFailureA NOTIFICATION-TYPE A failure was detected with power supply module A. | 1.3.6.1.4.1.11606.7.2.8.0.1 | current |
| powerSupplyPowerSupplyFailureB NOTIFICATION-TYPE A failure was detected with power supply module B. | 1.3.6.1.4.1.11606.7.2.8.0.2 | current |
| powerSupplyCoolingFanFailureA NOTIFICATION-TYPE A failure was detected with chassis cooling fan A. | 1.3.6.1.4.1.11606.7.2.8.0.3 | current |
| powerSupplyCoolingFanFailureB NOTIFICATION-TYPE A failure was detected with chassis cooling fan B. | 1.3.6.1.4.1.11606.7.2.8.0.4 | current |