PACKETFRONT-DRG-MIB
- Registered at
- 1.3.6.1.4.1.9303.4.3
- Last updated
- 2009-03-23 15:38
- Organization
- PacketFront Systems AB
- Revisions
- 2009-03-23 15:38, 2008-04-11 00:00
- Namespace
- waystream
- Source file
PACKETFRONT-DRG-MIB- Digest
sha256:14844879c8a6e849d5576e49eb114d009d108eed80c444b466261a79497099e2
Description
The MIB module for managing Packetfront DRG devices
Contact
PacketFront Systems AB Customer Service Mail : Isafjordsgatan 35 SE-164 28 Kista Sweden Tel : +46 8 5090 1500 E-mail: snmp@packetfront.com Web : http://www.packetfront.com
Imports
| From | Symbols |
|---|---|
| PACKETFRONT-SMI | pfMgmt |
| PACKETFRONT-TC | PortList |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
PACKETFRONT-DRG-MIB PACKETFRONT-SMI PACKETFRONT-TC SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| drgNotification OBJECT-IDENTITY | 1.3.6.1.4.1.9303.4.3.0 | |||
| drgConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9303.4.3.1 | |||
| productInfo OBJECT-IDENTITY | 1.3.6.1.4.1.9303.4.3.1.1 | |||
| productName OBJECT-TYPE The name of the product. | 1.3.6.1.4.1.9303.4.3.1.1.1 | OCTET STRING (SIZE(0..16)) | read-only | current |
| productSerialNo OBJECT-TYPE The unique serial number programmed into the device in the factory. | 1.3.6.1.4.1.9303.4.3.1.1.2 | OCTET STRING (SIZE(0..10)) | read-only | current |
| productProductionWeek OBJECT-TYPE The week and year in which this device was manufactured. | 1.3.6.1.4.1.9303.4.3.1.1.3 | OCTET STRING (SIZE(0..8)) | read-only | current |
| productSwImageRev OBJECT-TYPE The revision of the software in the device. This may be upgraded. E.g DMA0081-R2K123. | 1.3.6.1.4.1.9303.4.3.1.1.4 | OCTET STRING (SIZE(0..32)) | read-only | current |
| productFwImageRev OBJECT-TYPE The revision of the firmware in the device. This describes the bootloader revision, e.g. cxc_132_4098-R3A18. | 1.3.6.1.4.1.9303.4.3.1.1.5 | OCTET STRING (SIZE(0..32)) | read-only | current |
| productDefaultRevision OBJECT-TYPE The revision of the default configuration in the device. This describes the revision of information loaded during manufacture. | 1.3.6.1.4.1.9303.4.3.1.1.6 | OCTET STRING (SIZE(0..8)) | read-only | current |
| productOpDefRev OBJECT-TYPE The revision of the operator default information (the .ini file). The syntax is operator specific.Operator default revision ( INI file ). | 1.3.6.1.4.1.9303.4.3.1.1.7 | OCTET STRING (SIZE(0..32)) | read-only | current |
| productHardwareRev OBJECT-TYPE Manufacturing hardware information regarding the revision of the hardware. | 1.3.6.1.4.1.9303.4.3.1.1.8 | OCTET STRING (SIZE(0..32)) | read-only | current |
| productPlatform OBJECT-TYPE This provides a predefined string for each product family - this differs from productName in that this cannot be configured by the operator, therefore will be constant across all platforms of the same type irrespective of the operator-specific name for the platform. This is useful for network operators managing a heterogeneous mix of platforms from different service providers | 1.3.6.1.4.1.9303.4.3.1.1.9 | OCTET STRING (SIZE(0..16)) | read-only | current |
| productHardwarePCBARevision OBJECT-TYPE PCBA revision - this is a coded value read from the PCBA hardware. | 1.3.6.1.4.1.9303.4.3.1.1.10 | Integer32 | read-only | current |
| productFunctionIdentity OBJECT-TYPE Describes the functionality offered by the device. | 1.3.6.1.4.1.9303.4.3.1.1.11 | OCTET STRING (SIZE(0..32)) | read-only | current |
| productMacAddress OBJECT-TYPE The device MAC address - this is used in various alert messages to uniquely identify the specific device. The MAC address used is the MAC of the management entity of the device | 1.3.6.1.4.1.9303.4.3.1.1.12 | MacAddress | read-only | current |
| productIdentity OBJECT-TYPE This object provides a unique identity for the device. By default this will be the same as the productMacAddress, however, if a hostname has been defined or provided by a DHCP server, then this will be used instead. In the former case, therefore, the identity is guaranteed to be unique, while in the latter it is the operator's responsibility to ensure that the identity is unique. | 1.3.6.1.4.1.9303.4.3.1.1.13 | OCTET STRING (SIZE(0..32)) | read-only | current |
| systemConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9303.4.3.1.2 | |||
| systemConfigRestartControl OBJECT-TYPE Setting this object to restartNow(2) causes the device to reboot immediately. Note that this will cause any unsave configuration changes to be lost, therefore configuration changes should be saved before using this value if the changes are required. The device returns running(1) in all other cases. | 1.3.6.1.4.1.9303.4.3.1.2.1 | INTEGER {running(1), restartNow(2)} | read-write | current |
| systemConfigRestartControlNotify OBJECT-TYPE This object controls the operation of the notifyRestart alert. The notifyRestart is sent repeatedly when the object is equal to notifying(2). The notifyRestart is not sent when the object is equal to silent(1). | 1.3.6.1.4.1.9303.4.3.1.2.2 | INTEGER {silent(1), notifying(2)} | read-write | current |
| systemConfigSave OBJECT-TYPE Setting the object to save(1) causes the running configuration to be saved. The object responds with changed(2) if the running configuration differs from the initial configuration. The object responds with notChanged(3) if no configuration changes have occurred since the last save or boot. | 1.3.6.1.4.1.9303.4.3.1.2.3 | INTEGER {save(1), changed(2), notChanged(3)} | read-write | current |
| systemConfigFactoryReset OBJECT-TYPE Setting this object to factoryReset(2) causes the device to return to its factory default settings, and reboot. This means that any operator or user configuration changes will be deleted, and the device will appear as if it has not previously been installed and configured. When read this object will return running(1) unless it is currently in the process of performing a factory reset. | 1.3.6.1.4.1.9303.4.3.1.2.4 | INTEGER {running(1), factoryReset(2)} | read-write | current |
| systemConfigSaveNotify OBJECT-TYPE Setting this object to always(2) will cause the device to send a notifyConfigSaveResult alert each time the configuration is saved. Setting this object to onlyErrors(3) will cause the device to send a notifyConfigSaveResult if an error occurs during a configuration save procedure. Setting this object to silent(1) causes the device to not send notifyConfigSaveResult alerts. | 1.3.6.1.4.1.9303.4.3.1.2.5 | INTEGER {silent(1), always(2), onlyErrors(3)} | read-write | current |
| downloadConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9303.4.3.1.3 | |||
| downloadServer OBJECT-TYPE The address of the server that contains the file to be loaded. This may take the form of an IP address or FQDN. | 1.3.6.1.4.1.9303.4.3.1.3.1 | OCTET STRING (SIZE(0..32)) | read-write | current |
| downloadFile OBJECT-TYPE The file name to be downloaded from the download server or a URL to be downloaded via http. This value is set to the zero length string when no file name has been specified. | 1.3.6.1.4.1.9303.4.3.1.3.2 | OCTET STRING (SIZE(0..80)) | read-write | current |
| downloadAction OBJECT-TYPE When this object is set to startDownload(2), the system will attempt to connect to the server specified in downloadServer (or the host part of downloadFile if a URL has been specified there), using the method defined in downloadMethod. If the file is found and verified, it will be downloaded to the device and stored. When the download process is completed, the device will restart the newly loaded application. When the device is not downloading, this object will have a value of notDownloading(1). | 1.3.6.1.4.1.9303.4.3.1.3.3 | INTEGER {notDownloading(1), startDownload(2)} | read-write | current |
| downloadMethod OBJECT-TYPE Defines the method to be used for the file download. This may be a specific protocol, or auto(3) which will cycle through the available methods to find one which works. | 1.3.6.1.4.1.9303.4.3.1.3.4 | INTEGER {tftp(1), http(2), auto(3)} | read-write | current |
| downloadRetryCount OBJECT-TYPE Controls the number of attempts which will be made to perform a download before terminating the download attempt. | 1.3.6.1.4.1.9303.4.3.1.3.5 | Integer32 (1..10) | read-write | current |
| downloadResultCode OBJECT-TYPE This object returns the status of the last download procedure. If no downloads have occurred, none(0) is returned, or if there is currently a download in progress, inProgress(1) is returned. | 1.3.6.1.4.1.9303.4.3.1.3.6 | INTEGER {none(0), inProgress(1), success(2), failureHostNotFound(3), failureFileNotFound(4), failureFileIncorrectSize(5), failureFileVerifyFailure(6), failureFileIncompatible(7), failureUnknownError(8)} | read-only | current |
| downloadResultNotify OBJECT-TYPE Setting the object to always(2) cause the system to send downloadResultCodeTrap after every download no matter the result. Setting the object to onlyErrors(3) cause the system to send downloadResultCodeTrap when an error occurs during the download. Setting the object to silent(1) cause the system to not send any downloadResultNotify notifications. | 1.3.6.1.4.1.9303.4.3.1.3.7 | INTEGER {silent(1), always(2), onError(3)} | read-write | current |
| hostConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9303.4.3.1.4 | |||
| hostIfMax OBJECT-TYPE The maximum numbers of entries (and layer 3 interfaces) in the hostIfTable. | 1.3.6.1.4.1.9303.4.3.1.4.1 | Integer32 | read-only | current |
| hostIfDefined OBJECT-TYPE The current number of defined host interfaces, i.e. the number of entries in the hostIfTable. | 1.3.6.1.4.1.9303.4.3.1.4.2 | Integer32 | read-only | current |
| hostIfTable OBJECT-TYPE A table holding a list of interfaces. | 1.3.6.1.4.1.9303.4.3.1.4.3 | not-accessible | current | |
| hostIfEntry OBJECT-TYPE One row of the table. | 1.3.6.1.4.1.9303.4.3.1.4.3.1 | not-accessible | current | |
| hostIfIndex OBJECT-TYPE A unique index for this IP interface entry. | 1.3.6.1.4.1.9303.4.3.1.4.3.1.1 | Integer32 (1..4) | read-only | current |
| hostIfMode OBJECT-TYPE The operational mode of the interface, e.g. DHCP, PPPoE. | 1.3.6.1.4.1.9303.4.3.1.4.3.1.2 | INTEGER {dhcp(1), static(2), pppoe(3), pppoeFixed(4)} | read-write | current |
| hostIfHostName OBJECT-TYPE The name of the host interface. If the DHCP client is enabled this object reports the host name from the DHCP negotiation. | 1.3.6.1.4.1.9303.4.3.1.4.3.1.3 | OCTET STRING (SIZE(0..32)) | read-write | current |
| hostIfAddress OBJECT-TYPE The IP address for this interface entry. | 1.3.6.1.4.1.9303.4.3.1.4.3.1.4 | IpAddress | read-create | current |
| hostIfSubnetMask OBJECT-TYPE The subnet mask for this interface entry. | 1.3.6.1.4.1.9303.4.3.1.4.3.1.5 | IpAddress | read-write | current |
| hostIfDefaultRouter OBJECT-TYPE The default router for this interface entry. | 1.3.6.1.4.1.9303.4.3.1.4.3.1.6 | IpAddress | read-write | current |
| hostIfDomainName OBJECT-TYPE The name of the domain name. If the DHCP client is enabled this object reports the domain name from the DHCP negotiation. | 1.3.6.1.4.1.9303.4.3.1.4.3.1.7 | OCTET STRING (SIZE(0..32)) | read-write | current |
| hostIfDnsServer1 OBJECT-TYPE The primary DNS server for this interface entry. | 1.3.6.1.4.1.9303.4.3.1.4.3.1.8 | IpAddress | read-write | current |
| hostIfDnsServer2 OBJECT-TYPE The secondary DNS server for this interface entry. | 1.3.6.1.4.1.9303.4.3.1.4.3.1.9 | IpAddress | read-write | current |
| hostIfDhcpClientID OBJECT-TYPE Setting this object causes the system to use a proprietary client identifier to identify itself to the DHCP server. By default the productMacAddress value of the device is used. This object thus allows the definition of the DHCP option 61 value. | 1.3.6.1.4.1.9303.4.3.1.4.3.1.10 | OCTET STRING (SIZE(0..32)) | read-write | current |
| hostIfDhcpVendorClassID OBJECT-TYPE Setting this object causes the system to use the defined value as the DHCP vendor identifier in communication with the DHCP server. By default the value used is of the form 'drg-$productName$-$productSwImageRev$'. This object thus allows the definition of the DHCP option 60 value. | 1.3.6.1.4.1.9303.4.3.1.4.3.1.11 | OCTET STRING (SIZE(0..48)) | read-write | current |
| hostIfDiffservCodePoint OBJECT-TYPE Defines the IP DSCP value used by default for this interface. | 1.3.6.1.4.1.9303.4.3.1.4.3.1.12 | Integer32 (0..63) | read-write | current |
| hostIfVlan OBJECT-TYPE Values 1..4094 define the default IEEE802.1Q VLAN tag used by this interface. By convention, this is used as the management VLAN when VLANs are enabled on this interface. The value 0 disables the use of management VLANs on this interface. | 1.3.6.1.4.1.9303.4.3.1.4.3.1.13 | Integer32 (0..4094) | read-write | current |
| hostIfVlanPriority OBJECT-TYPE Defines the default IEEE802.1p priority tag used by this interface. By convention, this is used as the management priority when VLANs are enabled on this interface. | 1.3.6.1.4.1.9303.4.3.1.4.3.1.14 | Integer32 (0..7) | read-write | current |
| hostIfSecurePing OBJECT-TYPE Setting this object to enabled(1) causes the device to silently drop ICMP echo (ping) requests. This is a simple way to cloak the presence of a device from ping sweeps. | 1.3.6.1.4.1.9303.4.3.1.4.3.1.15 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| snmpConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9303.4.3.1.7 | |||
| snmpTrapDestHostsMax OBJECT-TYPE The maximum number of trap hosts which may be defined | 1.3.6.1.4.1.9303.4.3.1.7.1 | Integer32 | read-only | current |
| snmpTrapDestHostsDefined OBJECT-TYPE Current number of configured trap destinations. | 1.3.6.1.4.1.9303.4.3.1.7.2 | Integer32 | read-only | current |
| snmpTrapDestinationTable OBJECT-TYPE A table of transport addresses to be used in the generation of SNMP messages. | 1.3.6.1.4.1.9303.4.3.1.7.3 | not-accessible | current | |
| snmpTrapDestinationEntry OBJECT-TYPE A transport address to be used in the generation of SNMP operations. Entries in the trapDestinationTable are created and deleted using the snmpTrapDestRowStatus object. | 1.3.6.1.4.1.9303.4.3.1.7.3.1 | not-accessible | current | |
| snmpTrapDestIndex OBJECT-TYPE The locally arbitrary, but unique identifier associated with this trapDestinationEntry. | 1.3.6.1.4.1.9303.4.3.1.7.3.1.1 | Integer32 (1..6) | read-create | current |
| snmpTrapDestName OBJECT-TYPE This object contains a human readable name for the trap destination. | 1.3.6.1.4.1.9303.4.3.1.7.3.1.2 | OCTET STRING (SIZE(0..32)) | read-create | current |
| snmpTrapDestAddress OBJECT-TYPE This object contains the address of the trap destination. | 1.3.6.1.4.1.9303.4.3.1.7.3.1.3 | IpAddress | read-create | current |
| snmpTrapDestTagList OBJECT-TYPE This object contains a list of tag values which are used to select target addresses for a particular operation. | 1.3.6.1.4.1.9303.4.3.1.7.3.1.4 | OCTET STRING (SIZE(0..16)) | read-create | current |
| snmpTrapDestRowStatus OBJECT-TYPE The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the trapDestRowStatus column is 'notReady'. | 1.3.6.1.4.1.9303.4.3.1.7.3.1.5 | RowStatus | read-create | current |
| snmpReadCommunityName OBJECT-TYPE The read community string for the device. | 1.3.6.1.4.1.9303.4.3.1.7.4 | OCTET STRING (SIZE(1..16)) | read-write | current |
| snmpWriteCommunityName OBJECT-TYPE The write community string for the device. | 1.3.6.1.4.1.9303.4.3.1.7.5 | OCTET STRING (SIZE(1..16)) | read-write | current |
| snmpTrapCommunityName OBJECT-TYPE The notification community string for the device. | 1.3.6.1.4.1.9303.4.3.1.7.6 | OCTET STRING (SIZE(1..16)) | read-write | current |
| snmpDiffservCodePoint OBJECT-TYPE Defines the IP DSCP value used by the SNMP agent. | 1.3.6.1.4.1.9303.4.3.1.7.7 | Integer32 (0..63) | read-write | current |
| snmpAtomicSet OBJECT-TYPE Complex operations involving numerous set commands can cause problems due to the lack of atomic operation by the network management system. This object may be used to ensure that all required changes for this MIB are made in a single atomic operation. This can be achieved by setting this object to stage(2), then setting all required objects, and then setting this object to apply(3). The object value will return to idle(1) once the atomic set operation has been completed. | 1.3.6.1.4.1.9303.4.3.1.7.8 | INTEGER {idle(1), stage(2), apply(3)} | read-write | current |
| vlanConfig OBJECT-IDENTITY | 1.3.6.1.4.1.9303.4.3.1.8 | |||
| vlanBase OBJECT-IDENTITY | 1.3.6.1.4.1.9303.4.3.1.8.1 | |||
| vlanVersionNumber OBJECT-TYPE The version number of IEEE802.1Q that this device supports. | 1.3.6.1.4.1.9303.4.3.1.8.1.1 | INTEGER {version1(1), version2(2)} | read-only | current |
| vlanMaxVlanId OBJECT-TYPE The maximum IEEE802.1Q VLAN ID that this device supports. | 1.3.6.1.4.1.9303.4.3.1.8.1.2 | Integer32 (1..4094) | read-only | current |
| vlanMaxSupportedVlans OBJECT-TYPE The maximum number of IEEE802.1Q VLANs that this device supports. | 1.3.6.1.4.1.9303.4.3.1.8.1.3 | Unsigned32 | read-only | current |
| vlanNumVlans OBJECT-TYPE The current number of IEEE802.1Q VLANs that are configured in this device. | 1.3.6.1.4.1.9303.4.3.1.8.1.4 | Unsigned32 | read-only | current |
| vlanTp OBJECT-IDENTITY | 1.3.6.1.4.1.9303.4.3.1.8.2 | |||
| vlanFdbTable OBJECT-TYPE A table that contains configuration and control information for each Filtering Database currently operating on this device. Entries in this table appear automatically when VLANs are assigned FDB IDs in the vlanVlanCurrentTable. | 1.3.6.1.4.1.9303.4.3.1.8.2.1 | not-accessible | current | |
| vlanFdbEntry OBJECT-TYPE Information about a specific Filtering Database. | 1.3.6.1.4.1.9303.4.3.1.8.2.1.1 | not-accessible | current | |
| vlanFdbId OBJECT-TYPE The identity of this Filtering Database. | 1.3.6.1.4.1.9303.4.3.1.8.2.1.1.1 | Unsigned32 | not-accessible | current |
| vlanFdbDynamicCount OBJECT-TYPE The current number of dynamic entries in this Filtering Database. | 1.3.6.1.4.1.9303.4.3.1.8.2.1.1.2 | Counter32 | read-only | current |
| vlanTpFdbTable OBJECT-TYPE A table that contains information about unicast entries for which the device has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame. | 1.3.6.1.4.1.9303.4.3.1.8.2.2 | not-accessible | current | |
| vlanTpFdbEntry OBJECT-TYPE Information about a specific unicast MAC address for which the device has some forwarding and/or filtering information. | 1.3.6.1.4.1.9303.4.3.1.8.2.2.1 | not-accessible | current | |
| vlanTpFdbAddress OBJECT-TYPE A unicast MAC address for which the device has forwarding and/or filtering information. | 1.3.6.1.4.1.9303.4.3.1.8.2.2.1.1 | MacAddress | not-accessible | current |
| vlanTpFdbPort OBJECT-TYPE Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of vlanTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that the device does have some forwarding/filtering information about this address (e.g. in the vlanStaticUnicastTable). Implementors are encouraged to assign the port value to this object whenever it is learned even for addresses for which the corresponding value of vlanTpFdbStatus is not learned(3). | 1.3.6.1.4.1.9303.4.3.1.8.2.2.1.2 | Integer32 (0..65535) | read-only | current |
| vlanTpFdbStatus OBJECT-TYPE The status of this entry. The meanings of the values are: other(1) - none of the following. This may include the case where some other MIB object (not the corresponding instance of vlanTpFdbPort, nor an entry in the vlanStaticUnicastTable) is being used to determine if and how frames addressed to the value of the corresponding instance of vlanTpFdbAddress are being forwarded. invalid(2) - this entry is no longer valid (e.g., it was learned but has since aged out), but has not yet been flushed from the table. learned(3) - the value of the corresponding instance of vlanTpFdbPort was learned and is being used. self(4) - the value of the corresponding instance of vlanTpFdbAddress represents one of the device's addresses. The corresponding instance of vlanTpFdbPort indicates which of the device's ports has this address. mgmt(5) - the value of the corresponding instance of vlanTpFdbAddress is also the value of an existing instance of vlanStaticAddress. | 1.3.6.1.4.1.9303.4.3.1.8.2.2.1.3 | INTEGER {other(1), invalid(2), learned(3), self(4), mgmt(5)} | read-only | current |
| vlanStatic OBJECT-IDENTITY | 1.3.6.1.4.1.9303.4.3.1.8.3 | |||
| vlanStaticTable OBJECT-TYPE A table containing static configuration information for each VLAN configured on the device. All entries are permanent and will be restored after the device is reset. | 1.3.6.1.4.1.9303.4.3.1.8.3.1 | not-accessible | current | |
| vlanStaticEntry OBJECT-TYPE Static information for a VLAN configured in the device. | 1.3.6.1.4.1.9303.4.3.1.8.3.1.1 | not-accessible | current | |
| vlanStaticIndex OBJECT-TYPE The locally arbitrary, but unique identifier associated with this vlanStaticEntry. | 1.3.6.1.4.1.9303.4.3.1.8.3.1.1.1 | Integer32 (1..16) | read-create | current |
| vlanStaticName OBJECT-TYPE An administratively assigned string, which may be used to identify the VLAN | 1.3.6.1.4.1.9303.4.3.1.8.3.1.1.2 | OCTET STRING (SIZE(0..16)) | read-write | current |
| vlanStaticVlanId OBJECT-TYPE The VLAN identifier associated with this VLAN entry | 1.3.6.1.4.1.9303.4.3.1.8.3.1.1.3 | Integer32 (1..4094) | read-write | current |
| vlanStaticPriority OBJECT-TYPE The IEEE802.1p priority value associated with this VLAN entry - this information may be used for policing priority where supported | 1.3.6.1.4.1.9303.4.3.1.8.3.1.1.4 | Integer32 (0..7) | read-write | current |
| vlanStaticEgressPorts OBJECT-TYPE The set of ports which are permanently assigned to the egress list for this VLAN by management. The default value of this object is a string of zeros of appropriate length, indicating not fixed. | 1.3.6.1.4.1.9303.4.3.1.8.3.1.1.5 | PortList | read-write | current |
| vlanStaticUntaggedPorts OBJECT-TYPE Describes the set of ports which should transmit egress packets for this VLAN untagged. If a device agent cannot support the set of ports being set then it will reject the set operation with an error. An example might be if a manager attempts to set more than one VLAN to be untagged on egress where the device does not support this IEEE 802.1Q option. | 1.3.6.1.4.1.9303.4.3.1.8.3.1.1.6 | PortList | read-write | current |
| vlanStaticUnmodifiedPorts OBJECT-TYPE Describes the set of ports which should transmit egress packets for this VLAN unmodified. If a device agent cannot support the set of ports being set then it will reject the set operation with an error. Note that if this behaviour is supported and the bit is set for a port, the value of the same bit in vlanStaticUntaggedPorts is ignored. | 1.3.6.1.4.1.9303.4.3.1.8.3.1.1.7 | PortList | read-write | current |
| vlanStaticRowStatus OBJECT-TYPE This object indicates the status of this entry. | 1.3.6.1.4.1.9303.4.3.1.8.3.1.1.8 | RowStatus | read-create | current |
| drgConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9303.4.3.2 | |||
| drgGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9303.4.3.2.1 | |||
| drgCompliance OBJECT-IDENTITY | 1.3.6.1.4.1.9303.4.3.2.2 | |||
| drgCompatibility OBJECT-IDENTITY | 1.3.6.1.4.1.9303.4.3.2.3 |
Notifications
| Name | OID | Status |
|---|---|---|
| notifyRestart NOTIFICATION-TYPE After booting the system sends this notification repeatedly with an increasing time delay until a valid management station reads or writes an object. | 1.3.6.1.4.1.9303.4.3.0.1 | current |
| notifyDownloadResult NOTIFICATION-TYPE When the device has downloaded a new firmware image or configuration file, the device sends this notification to inform the management system of the result. | 1.3.6.1.4.1.9303.4.3.0.2 | current |
| notifyConfigSaveResult NOTIFICATION-TYPE When a save event occurs, the device sends this notification to inform the management system of the result. | 1.3.6.1.4.1.9303.4.3.0.3 | current |