PACKETFLUX-STANDBYPOWER
- Registered at
- 1.3.6.1.4.1.32050.2.2
- Last updated
- 2013-06-04 16:49
- Organization
- PacketFlux Technologies
- Revisions
- 2013-06-04 16:49
- Namespace
- packetflux
- Source file
PACKETFLUX-STANDBYPOWER- Digest
sha256:91c766b651c50f393379aa747e80c51b01ad2dcfe21c55e355d31c418a25deab
Description
MIB for the PacketFlux Standby Power Controller
Contact
custsvc@packetflux.com http://www.packetflux.com
Imports
| From | Symbols |
|---|---|
| PACKETFLUX-SMI | packetfluxMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
PACKETFLUX-SMI PACKETFLUX-STANDBYPOWER SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| powercontrollerstate OBJECT-TYPE The status of the standby power controller. | 1.3.6.1.4.1.32050.2.2.1 | INTEGER {onprimarypower(1), startingstandby(2), transferringtostandby(3), onstandbypower(4), transferringtoprimary(5)} | read-only | current |
| transferswitchstate OBJECT-TYPE The current state in the transfer sequence. | 1.3.6.1.4.1.32050.2.2.2 | INTEGER {primary(1), transfertostandby1(2), transfertostandby2(3), transfertostandby3(4), standby(5), transfertoprimary1(6), transfertoprimary2(7), transfertoprimary3(8)} | read-only | current |
| standbypowerstate OBJECT-TYPE The current state in the standby power sequence. | 1.3.6.1.4.1.32050.2.2.3 | INTEGER {stopped(1), prepare1(2), prepare2(3), prepare3(4), startup1(5), startup2(6), startup3(7), checkrun(8), reprepare1(9), reprepare2(10), reprepare3(11), warmup1(12), warmup2(13), warmup3(14), verifyrun(15), running(16), cooldown1(17), cooldown2(18), cooldown3(19), shutdown1(20), shutdown2(21), shutdown3(22), verifystopped(23), postshutdown1(24), postshutdown2(25), postshutdown3(26)} | read-only | current |
| ac1voltage OBJECT-TYPE The voltage of the AC input AC1 in 1/10ths of a volt. | 1.3.6.1.4.1.32050.2.2.4 | Gauge32 | read-only | current |
| ac1frequency OBJECT-TYPE The frequency of the AC input AC1 in 1/100ths of a Hertz. | 1.3.6.1.4.1.32050.2.2.5 | Gauge32 | read-only | current |
| ac2voltage OBJECT-TYPE The voltage of the AC input AC2 in 1/10ths of a volt. | 1.3.6.1.4.1.32050.2.2.6 | Gauge32 | read-only | current |
| ac2frequency OBJECT-TYPE The frequency of the AC input AC2 in 1/100ths of a Hertz. | 1.3.6.1.4.1.32050.2.2.7 | Gauge32 | read-only | current |
| mtr1voltage OBJECT-TYPE The voltage of the DC input Mtr1 in 1/10ths of a volt. | 1.3.6.1.4.1.32050.2.2.8 | Gauge32 | read-only | current |
| mtr2voltage OBJECT-TYPE The voltage of the DC input Mtr2 in 1/10ths of a volt. | 1.3.6.1.4.1.32050.2.2.9 | Gauge32 | read-only | current |
| pwr1voltage OBJECT-TYPE The voltage of the DC input Pwr3 in 1/10ths of a volt. | 1.3.6.1.4.1.32050.2.2.10 | Gauge32 | read-only | current |
| pwr2voltage OBJECT-TYPE The voltage of the DC input Pwr2 in 1/10ths of a volt. | 1.3.6.1.4.1.32050.2.2.11 | Gauge32 | read-only | current |
| shuntvoltage OBJECT-TYPE The voltage of the DC input Shunt in 1/10ths of a millivolt. Can be negative. | 1.3.6.1.4.1.32050.2.2.12 | Integer32 | read-only | current |
| temperature OBJECT-TYPE The temperature of the onboard temperature sensor in 1/10ths of a degree centigrade. | 1.3.6.1.4.1.32050.2.2.13 | Gauge32 | read-only | current |
| recentunsuccessfulstarts OBJECT-TYPE The number of times the standby power source was not successfully started. This counter resets upon a successful start. It can also be reset via the web interface or by writing 0 to this object. | 1.3.6.1.4.1.32050.2.2.14 | Integer32 | read-write | current |
| totalunsuccessfulstarts OBJECT-TYPE The number of times the standby power source was not successfully started. This counter DOES NOT reset upon a successful start. It can be reset via the web interface or by writing 0 to this object. | 1.3.6.1.4.1.32050.2.2.15 | Integer32 | read-write | current |
| recentstalls OBJECT-TYPE The number of times the standby power source has stalled. This counter resets upon a clean shutdown. It can also be reset via the web interface or by writing 0 to this object. | 1.3.6.1.4.1.32050.2.2.16 | Integer32 | read-write | current |
| totalstalls OBJECT-TYPE The number of times the standby power source has stalled. This counter DOES NOT reset upon a clean shutdown. It can be reset via the web interface or by writing 0 to this object. | 1.3.6.1.4.1.32050.2.2.17 | Integer32 | read-write | current |
| numberofstarts OBJECT-TYPE The number of times the secondary power source has started. This counter increments when the standby sequence reaches the running state. This counter can be reset via the web interface or by writing 0 to this object. | 1.3.6.1.4.1.32050.2.2.18 | Integer32 | read-write | current |
| numberoftransfers OBJECT-TYPE The number of times the power has transfered from primary to standby, or back. A complete transfer cycle from primary to standby and back to primary will increment this counter twice. This counter can be reset via the web interface or by writing 0 to this object. | 1.3.6.1.4.1.32050.2.2.19 | Integer32 | read-write | current |
| currenttimeonprimary OBJECT-TYPE The amount of time the transfer switch has been in the primary state (position) since the most recent transfer to that state. This timer resets to zero when the transfer switch leaves the primary state (position). This timer can be reset via the web interface or by writing 0 to this object. | 1.3.6.1.4.1.32050.2.2.20 | TimeTicks | read-write | current |
| totaltimeonprimary OBJECT-TYPE The amount of time the transfer switch has been in the primary state (position) since power on or the last reset of this counter. This timer does not automatically reset. This timer can be reset via the web interface or by writing 0 to this object. | 1.3.6.1.4.1.32050.2.2.21 | TimeTicks | read-write | current |
| currenttimeonstandby OBJECT-TYPE The amount of time the transfer switch has been in the standby state (position) since the most recent transfer to that state. This timer resets to zero when the transfer switch leaves the primary state (position). This timer can be reset via the web interface or by writing 0 to this object. | 1.3.6.1.4.1.32050.2.2.22 | TimeTicks | read-write | current |
| totaltimeonstandby OBJECT-TYPE The amount of time the transfer switch has been in the standby state (position) since power on or the last reset of this counter. This timer does not automatically reset. This timer can be reset via the web interface or by writing 0 to this object. | 1.3.6.1.4.1.32050.2.2.23 | TimeTicks | read-write | current |
| currentstandbyruntime OBJECT-TYPE The amount of time the standby power source has been running during it's current run. This timer resets to zero when the standby power source shuts down. This timer can be reset via the web interface or by writing 0 to this object. | 1.3.6.1.4.1.32050.2.2.24 | TimeTicks | read-write | current |
| totalstandbyruntime OBJECT-TYPE The amount of time the standby power source has been running since power on or the last reset of this counter. This timer does not automatically reset. This timer can be reset via the web interface or by writing 0 to this object. | 1.3.6.1.4.1.32050.2.2.25 | TimeTicks | read-write | current |
| laststandbyrun OBJECT-TYPE The amount of time since the standby power source ran last. This timer resets upon start of the standby power source and starts timing upon shutdown of the standby power source. This timer can be reset via the web interface or by writing 0 to this object. | 1.3.6.1.4.1.32050.2.2.26 | TimeTicks | read-write | current |
| laststandbygracefulstop OBJECT-TYPE The amount of time since standby power source was gracefully shutdown. This timer resets and starts timing upon graceful shutdown of the standby power source. This timer can be reset via the web interface or by writing 0 to this object. | 1.3.6.1.4.1.32050.2.2.27 | TimeTicks | read-write | current |
| laststandbyunsuccessfulstart OBJECT-TYPE The amount of time since the last failed start of the standby power source . This timer resets and starts timing upon a unsuccessful start of the power source. This timer can be reset via the web interface or by writing 0 to this object. | 1.3.6.1.4.1.32050.2.2.28 | TimeTicks | read-write | current |
| laststandbyfailure OBJECT-TYPE The amount of time since the stall or failure while running of the standby power source . This timer resets and starts timing upon a stall/failure of the power source. This timer can be reset via the web interface or by writing 0 to this object. | 1.3.6.1.4.1.32050.2.2.29 | TimeTicks | read-write | current |
| switch1closed OBJECT-TYPE True(1) if the Switch 1 input is closed (shorted/on). False(2) if it is open. | 1.3.6.1.4.1.32050.2.2.30 | TruthValue | read-only | current |
| switch2closed OBJECT-TYPE True(1) if the Switch 2 input is closed (shorted/on). False(2) if it is open. | 1.3.6.1.4.1.32050.2.2.31 | TruthValue | read-only | current |
| switch3closed OBJECT-TYPE True(1) if the Switch 3 input is closed (shorted/on). False(2) if it is open. | 1.3.6.1.4.1.32050.2.2.32 | TruthValue | read-only | current |
| switch4closed OBJECT-TYPE True(1) if the Switch 4 input is closed (shorted/on). False(2) if it is open. | 1.3.6.1.4.1.32050.2.2.33 | TruthValue | read-only | current |
| switch5closed OBJECT-TYPE True(1) if the Switch 5 input is closed (shorted/on). False(2) if it is open. | 1.3.6.1.4.1.32050.2.2.34 | TruthValue | read-only | current |
| enabled OBJECT-TYPE True(1) if the enable input is closed (shorted/on). False(2) if it is open. | 1.3.6.1.4.1.32050.2.2.35 | TruthValue | read-only | current |
| relay1on OBJECT-TYPE True(1) if the Relay 1 ouput is on (C and NO connected). False(2) if it is off (C and NC connected). | 1.3.6.1.4.1.32050.2.2.36 | TruthValue | read-only | current |
| relay2on OBJECT-TYPE True(1) if the Relay 2 ouput is on (C and NO connected). False(2) if it is off (C and NC connected). | 1.3.6.1.4.1.32050.2.2.37 | TruthValue | read-only | current |
| relay3on OBJECT-TYPE True(1) if the Relay 3 ouput is on (C and NO connected). False(2) if it is off (C and NC connected). | 1.3.6.1.4.1.32050.2.2.38 | TruthValue | read-only | current |
| relay4on OBJECT-TYPE True(1) if the Relay 4 ouput is on (C and NO connected). False(2) if it is off (C and NC connected). | 1.3.6.1.4.1.32050.2.2.39 | TruthValue | read-only | current |
| relay5on OBJECT-TYPE True(1) if the Relay 5 output is on (C and NO connected). False(2) if it is off (C and NC connected). | 1.3.6.1.4.1.32050.2.2.40 | TruthValue | read-only | current |
| relay6on OBJECT-TYPE True(1) if the Relay 6 output is on (C and NO connected). False(2) if it is off (C and NC connected). | 1.3.6.1.4.1.32050.2.2.41 | TruthValue | read-only | current |
| relay7on OBJECT-TYPE True(1) if the Relay 7 output is on (C and NO connected). False(2) if it is off (C and NC connected). | 1.3.6.1.4.1.32050.2.2.42 | TruthValue | read-only | current |
| ruleswitchstandby OBJECT-TYPE True(1) if the switch to standby rule is true. False(2) if it is not. | 1.3.6.1.4.1.32050.2.2.43 | TruthValue | read-only | current |
| rulereturnprimary OBJECT-TYPE True(1) if the return to primary rule is true. False(2) if it is not. | 1.3.6.1.4.1.32050.2.2.44 | TruthValue | read-only | current |
| rulestandbygood OBJECT-TYPE True(1) if the standby power good rule is true. False(2) if it is not. | 1.3.6.1.4.1.32050.2.2.45 | TruthValue | read-only | current |
| rulestopstandby OBJECT-TYPE True(1) if the stop standby and consider it failed rule is true. False(2) if it is not. | 1.3.6.1.4.1.32050.2.2.46 | TruthValue | read-only | current |
| ruleexercisestandby OBJECT-TYPE True(1) if the exercise standby without transfer rule is true. False(2) if it is not. | 1.3.6.1.4.1.32050.2.2.47 | TruthValue | read-only | current |
| webcontrol1 OBJECT-TYPE True(1) if the webcontrol 1 virtual toggle switch is in the on position. False(2) if it is not. This value can be written to affect the position of the toggle switch. | 1.3.6.1.4.1.32050.2.2.48 | TruthValue | read-write | current |
| webcontrol2 OBJECT-TYPE True(1) if the webcontrol 2 virtual toggle switch is in the on position. False(2) if it is not. This value can be written to affect the position of the toggle switch. | 1.3.6.1.4.1.32050.2.2.49 | TruthValue | read-write | current |
| webcontrol3 OBJECT-TYPE True(1) if the webcontrol 3 virtual toggle switch is in the on position. False(2) if it is not. This value can be written to affect the position of the toggle switch. | 1.3.6.1.4.1.32050.2.2.50 | TruthValue | read-write | current |
| webcontrol4 OBJECT-TYPE True(1) if the webcontrol 4 virtual toggle switch is in the on position. False(2) if it is not. This value can be written to affect the position of the toggle switch. | 1.3.6.1.4.1.32050.2.2.51 | TruthValue | read-write | current |
| webcontrol5 OBJECT-TYPE True(1) if the webcontrol 5 virtual toggle switch is in the on position. False(2) if it is not. This value can be written to affect the position of the toggle switch. | 1.3.6.1.4.1.32050.2.2.52 | TruthValue | read-write | current |
| webcontrol6 OBJECT-TYPE True(1) if the webcontrol 6 virtual toggle switch is in the on position. False(2) if it is not. This value can be written to affect the position of the toggle switch. | 1.3.6.1.4.1.32050.2.2.53 | TruthValue | read-write | current |
| webcontrol7 OBJECT-TYPE True(1) if the webcontrol 7 virtual toggle switch is in the on position. False(2) if it is not. This value can be written to affect the position of the toggle switch. | 1.3.6.1.4.1.32050.2.2.54 | TruthValue | read-write | current |
| webcontrol8 OBJECT-TYPE True(1) if the webcontrol 8 virtual toggle switch is in the on position. False(2) if it is not. This value can be written to affect the position of the toggle switch. | 1.3.6.1.4.1.32050.2.2.55 | TruthValue | read-write | current |
| standbypowerConformance OBJECT-IDENTITY | 1.3.6.1.4.1.32050.2.2.256 | |||
| standbypowerGroups OBJECT-IDENTITY | 1.3.6.1.4.1.32050.2.2.256.1 |
Conformance
| Name | OID | Status |
|---|---|---|
| packetfluxStandbypowerAllObjects OBJECT-GROUP This automatically created object group contains all those objects that do not belong to any other OBJECT-GROUP | 1.3.6.1.4.1.32050.2.2.256.1.1 | current |