OSPFV3-MIB-JUNIPER
- Registered at
- 1.3.6.1.4.1.2636.5.4.1
- Last updated
- 2011-03-30 12:00
- Organization
- IETF OSPF Working Group
- Revisions
- 2006-08-09 12:00, 2011-03-30 12:00
- Namespace
- juniper
- Source file
OSPFV3-MIB-JUNIPER- Digest
sha256:f4f157ca16e58725fd35db06d96a182be0fea9b5fb396614851d16e6144a7f29
Description
The MIB module for OSPF version 3. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC XXXX; see the RFC itself for full legal notices.
Contact
WG E-Mail: ospf@ietf.org WG Chairs: acee@cisco.com dube.rohit@gmail.com Dan Joyal Nortel 600 Technology Park Drive Billerica, MA 01821, USA djoyal@nortel.com Vishwas Manral IP Infusion Bangalore India vishwas@ipinfusion.com
Imports
| From | Symbols |
|---|---|
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressPrefixLength, InetAddressType |
| JUNIPER-EXPERIMENT-MIB | jnxOspfv3Experiment |
| OSPF-MIB | BigMetric, DesignatedRouterPriority, HelloRange, Metric, Status |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso, mib-2 |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB IF-MIB INET-ADDRESS-MIB JUNIPER-EXPERIMENT-MIB JUNIPER-SMI OSPF-MIB OSPFV3-MIB-JUNIPER SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| JnxOspfv3AreaIdTc TEXTUAL-CONVENTION An OSPFv3 Area Identifier | deprecated | |||
| JnxOspfv3DeadIntRangeTc TEXTUAL-CONVENTION The range, in seconds, of dead interval value. | deprecated | |||
| JnxOspfv3IfInstIdTc TEXTUAL-CONVENTION An OSPFv3 interface instance ID | deprecated | |||
| JnxOspfv3RouterIdTc TEXTUAL-CONVENTION A 32-bit, unsigned integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the value of one of the router's IPv4 host addresses if IPv4 is configured on the router. | deprecated | |||
| JnxOspfv3UpToRefreshIntervalTc TEXTUAL-CONVENTION The values one might be able to configure for variables bounded by the Refresh Interval | deprecated |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| jnxOspfv3Notifications OBJECT-IDENTITY | 1.3.6.1.4.1.2636.5.4.1.0 | |||
| jnxOspfv3Objects OBJECT-IDENTITY | 1.3.6.1.4.1.2636.5.4.1.1 | |||
| jnxOspfv3GeneralGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2636.5.4.1.1.1 | |||
| jnxOspfv3RouterId OBJECT-TYPE A 32-bit integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the value of one of the router's IPv4 host addresses, represented as a 32-bit unsigned integer, if IPv4 is configured on the router. | 1.3.6.1.4.1.2636.5.4.1.1.1.1 | JnxOspfv3RouterIdTc | read-write | deprecated |
| jnxOspfv3AdminStat OBJECT-TYPE The administrative status of OSPFv3 in the router. The value 'enabled' denotes that the OSPFv3 Process is active on at least one interface; 'disabled' disables it on all interfaces. | 1.3.6.1.4.1.2636.5.4.1.1.1.2 | Status | read-write | deprecated |
| jnxOspfv3VersionNumber OBJECT-TYPE The version number of OSPF for IPv6 is 3. | 1.3.6.1.4.1.2636.5.4.1.1.1.3 | INTEGER {version3(3)} | read-only | deprecated |
| jnxOspfv3AreaBdrRtrStatus OBJECT-TYPE A flag to note whether this router is an area border router. | 1.3.6.1.4.1.2636.5.4.1.1.1.4 | TruthValue | read-only | deprecated |
| jnxOspfv3ASBdrRtrStatus OBJECT-TYPE A flag to note whether this router is configured as an Autonomous System border router. | 1.3.6.1.4.1.2636.5.4.1.1.1.5 | TruthValue | read-write | deprecated |
| jnxOspfv3AsScopeLsaCount OBJECT-TYPE The number of AS-Scope (e.g. AS-External) link state advertisements in the link state database. | 1.3.6.1.4.1.2636.5.4.1.1.1.6 | Gauge32 | read-only | deprecated |
| jnxOspfv3AsScopeLsaCksumSum OBJECT-TYPE The 32-bit unsigned sum of the LS checksums of the AS-scoped link state advertisements contained in the link state database. This sum can be used to determine if there has been a change in a router's link state database, and to compare the link state database of two routers. | 1.3.6.1.4.1.2636.5.4.1.1.1.7 | Integer32 | read-only | deprecated |
| jnxOspfv3OriginateNewLsas OBJECT-TYPE The number of new link-state advertisements that have been originated. This number is incremented each time the router originates a new LSA. | 1.3.6.1.4.1.2636.5.4.1.1.1.8 | Counter32 | read-only | deprecated |
| jnxOspfv3RxNewLsas OBJECT-TYPE The number of link state advertisements received determined to be new instantiations. This number does not include newer instantiations of self-originated link state advertisements. | 1.3.6.1.4.1.2636.5.4.1.1.1.9 | Counter32 | read-only | deprecated |
| jnxOspfv3ExtLsaCount OBJECT-TYPE The number of External(LS type 0x4005) in the link state database | 1.3.6.1.4.1.2636.5.4.1.1.1.10 | Gauge32 | read-only | deprecated |
| jnxOspfv3ExtAreaLsdbLimit OBJECT-TYPE The maximum number of non-default AS-external-LSAs entries that can be stored in the link state database. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches ospfv3ExtAreaLsdbLimit, the router enters Overflow state. The router never holds more than ospfv3ExtAreaLsdbLimit non-default AS-external-LSAs in its database. Ospfv3ExtAreaLsdbLimit MUST be set identically in all routers attached to the OSPFv3 backbone and/or any regular OSPFv3 area. (i.e., OSPFv3 stub areas and NSSAs are excluded). | 1.3.6.1.4.1.2636.5.4.1.1.1.11 | Integer32 (-1..2147483647) | read-write | deprecated |
| jnxOspfv3MulticastExtensions OBJECT-TYPE A Bit Mask indicating whether the router is forwarding IPv6 multicast datagrams based on the algorithms defined in the Multicast Extensions to OSPF. If intraAreaMulticast set, indicates that the router can forward IPv6 multicast datagrams in the router's directly attached areas (called intra-area multicast routing). If interAreaMulticast set, indicates that the router can forward IPv6 multicast datagrams between OSPFv3 areas (called inter-area multicast routing). If interAsMulticast set, indicates that the router can forward IPv6 multicast datagrams between Autonomous Systems (called inter-AS multicast routing). Only certain combinations of bit settings are allowed, namely: - All bits cleared (no multicasting) - intraAreaMulticast only, - intraAreaMulticast and interAreaMulticast, - intraAreaMulticast and interAsMulticast - intraAreaMulticast, interAreaMulticast and interAsMulticast By default, all bits are cleared. | 1.3.6.1.4.1.2636.5.4.1.1.1.12 | Bits {intraAreaMulticast(0), interAreaMulticast(1), interAsMulticast(2)} | read-write | deprecated |
| jnxOspfv3ExitOverflowInterval OBJECT-TYPE The number of seconds that, after entering Overflow State, a router will attempt to leave Overflow State. This allows the router to again originate non-default, AS-External-LSAs. When set to 0, the router will not leave Overflow State until restarted. | 1.3.6.1.4.1.2636.5.4.1.1.1.13 | Unsigned32 | read-write | deprecated |
| jnxOspfv3DemandExtensions OBJECT-TYPE The router's support for demand routing. | 1.3.6.1.4.1.2636.5.4.1.1.1.14 | TruthValue | read-write | deprecated |
| jnxOspfv3ReferenceBandwidth OBJECT-TYPE Reference bandwidth in kilobits/second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBPS) | 1.3.6.1.4.1.2636.5.4.1.1.1.15 | Unsigned32 | read-write | deprecated |
| jnxOspfv3RestartSupport OBJECT-TYPE The router's support for OSPF Graceful restart. Options include: no restart support, only planned restarts or both planned and unplanned restarts. | 1.3.6.1.4.1.2636.5.4.1.1.1.16 | INTEGER {none(1), plannedOnly(2), plannedAndUnplanned(3)} | read-write | deprecated |
| jnxOspfv3RestartInterval OBJECT-TYPE Configured OSPF Graceful restart timeout interval. | 1.3.6.1.4.1.2636.5.4.1.1.1.17 | JnxOspfv3UpToRefreshIntervalTc | read-write | deprecated |
| jnxOspfv3RestartStatus OBJECT-TYPE The current status of OSPF Graceful restart capability. | 1.3.6.1.4.1.2636.5.4.1.1.1.18 | INTEGER {notRestarting(1), plannedRestart(2), unplannedRestart(3)} | read-only | deprecated |
| jnxOspfv3RestartAge OBJECT-TYPE Remaining time in current OSPF Graceful restart interval. | 1.3.6.1.4.1.2636.5.4.1.1.1.19 | JnxOspfv3UpToRefreshIntervalTc | read-only | deprecated |
| jnxOspfv3RestartExitRc OBJECT-TYPE Describes the outcome of the last attempt at a Graceful restart. none:............no restart has yet been attempted. inProgress:......a restart attempt is currently underway. completed:.......the last restart completed successfully. timedOut:........the last restart timed out. topologyChanged:.the last restart was aborted due to a topology change. | 1.3.6.1.4.1.2636.5.4.1.1.1.20 | INTEGER {none(1), inProgress(2), completed(3), timedOut(4), topologyChanged(5)} | read-only | deprecated |
| jnxOspfv3NotificationEnable OBJECT-TYPE If this object is set to true(1), then it enables the generation of OSPFv3 Notifications. If it is set to false(2), these notifications are not generated. Configured values MUST survive an agent reboot. | 1.3.6.1.4.1.2636.5.4.1.1.1.21 | TruthValue | read-write | deprecated |
| jnxOspfv3AreaTable OBJECT-TYPE Information describing the configured parameters and cumulative statistics of the router's attached areas. Marking this table and its objects deprecated as it is now implemented as a part of RFC 5643. | 1.3.6.1.4.1.2636.5.4.1.1.2 | not-accessible | deprecated | |
| jnxOspfv3AreaEntry OBJECT-TYPE Information describing the configured parameters and cumulative statistics of one of the router's attached areas. | 1.3.6.1.4.1.2636.5.4.1.1.2.1 | not-accessible | deprecated | |
| jnxOspfv3AreaId OBJECT-TYPE A 32-bit integer uniquely identifying an area. Area ID 0 is used for the OSPFv3 backbone. | 1.3.6.1.4.1.2636.5.4.1.1.2.1.1 | JnxOspfv3AreaIdTc | not-accessible | deprecated |
| jnxOspfv3ImportAsExtern OBJECT-TYPE Indicates whether an area is a Stub area, NSSA, or standard area. AS-scope LSAs are not imported into Stub Areas or NSSAs. NSSAs import AS-External data as NSSA LSAs which have Area-scope | 1.3.6.1.4.1.2636.5.4.1.1.2.1.2 | INTEGER {importExternal(1), importNoExternal(2), importNssa(3)} | read-create | deprecated |
| jnxOspfv3AreaSpfRuns OBJECT-TYPE The number of times that the intra-area route table has been calculated using this area's link state database. This is typically done using Dijkstra's algorithm. | 1.3.6.1.4.1.2636.5.4.1.1.2.1.3 | Counter32 | read-only | deprecated |
| jnxOspfv3AreaBdrRtrCount OBJECT-TYPE The total number of area border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. | 1.3.6.1.4.1.2636.5.4.1.1.2.1.4 | Gauge32 | read-only | deprecated |
| jnxOspfv3AreaAsBdrRtrCount OBJECT-TYPE The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. | 1.3.6.1.4.1.2636.5.4.1.1.2.1.5 | Gauge32 | read-only | deprecated |
| jnxOspfv3AreaScopeLsaCount OBJECT-TYPE The total number of Area-Scope link state advertisements in this area's link state database. | 1.3.6.1.4.1.2636.5.4.1.1.2.1.6 | Gauge32 | read-only | deprecated |
| jnxOspfv3AreaScopeLsaCksumSum OBJECT-TYPE The 32-bit unsigned sum of the Area-Scope link state advertisements' LS checksums contained in this area's link state database. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers. | 1.3.6.1.4.1.2636.5.4.1.1.2.1.7 | Integer32 | read-only | deprecated |
| jnxOspfv3AreaSummary OBJECT-TYPE The variable ospfv3AreaSummary controls the import of Inter-Area LSAs into stub and NSSA areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate Inter-Area LSAs into the stub or NSSA area. It will rely entirely on its default route. If it is sendAreaSummary, the router will both summarize and propagate Inter-Area LSAs. | 1.3.6.1.4.1.2636.5.4.1.1.2.1.8 | INTEGER {noAreaSummary(1), sendAreaSummary(2)} | read-create | deprecated |
| jnxOspfv3AreaStatus OBJECT-TYPE This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified. | 1.3.6.1.4.1.2636.5.4.1.1.2.1.9 | RowStatus | read-create | deprecated |
| jnxOspfv3StubMetric OBJECT-TYPE The metric value advertised for the default route into Stub and NSSA areas. | 1.3.6.1.4.1.2636.5.4.1.1.2.1.10 | BigMetric | read-create | deprecated |
| jnxOspfv3AreaNssaTranslatorRole OBJECT-TYPE Indicates an NSSA Border router's ability to perform NSSA translation of NSSA-LSAs into AS-External-LSAs. | 1.3.6.1.4.1.2636.5.4.1.1.2.1.11 | INTEGER {always(1), candidate(2)} | read-create | deprecated |
| jnxOspfv3AreaNssaTranslatorState OBJECT-TYPE Indicates if and how an NSSA Border router is performing NSSA translation of NSSA-LSAs into AS-External-LSA's. When this object is set to enabled, the NSSA Border router's ospfv3AreaNssTranslatorRole has been set to always. When this object is set to elected, a candidate NSSA Border router is translating NSSA-LSA's into AS-External-LSA's. When this object is set to disabled, a candidate NSSA Border router is NOT translating NSSA-LSA's into AS-External-LSA's. | 1.3.6.1.4.1.2636.5.4.1.1.2.1.12 | INTEGER {enabled(1), elected(2), disabled(3)} | read-only | deprecated |
| jnxOspfv3AreaNssaTranslatorStabInt OBJECT-TYPE The number of seconds after an elected translator determines its services are no longer required, that it should continue to perform its translation duties. | 1.3.6.1.4.1.2636.5.4.1.1.2.1.13 | Unsigned32 | read-create | deprecated |
| jnxOspfv3AreaNssaTranslatorEvents OBJECT-TYPE Indicates the number of Translator State changes that have occurred since the last boot-up. | 1.3.6.1.4.1.2636.5.4.1.1.2.1.14 | Counter32 | read-only | deprecated |
| jnxOspfv3AreaStubMetricType OBJECT-TYPE This variable displays the type of metric advertised as a default route. | 1.3.6.1.4.1.2636.5.4.1.1.2.1.15 | INTEGER {ospfv3Metric(1), comparableCost(2), nonComparable(3)} | read-create | deprecated |
| jnxOspfv3AsLsdbTable OBJECT-TYPE The OSPFv3 Process's AS-Scope Link State Database. Marking this table and its objects deprecated as it is now implemented as a part of RFC 5643. | 1.3.6.1.4.1.2636.5.4.1.1.3 | not-accessible | deprecated | |
| jnxOspfv3AsLsdbEntry OBJECT-TYPE A single AS-Scope Link State Advertisement. | 1.3.6.1.4.1.2636.5.4.1.1.3.1 | not-accessible | deprecated | |
| jnxOspfv3AsLsdbType OBJECT-TYPE The type of the link state advertisement. Each link state type has a separate advertisement format. AS-Scope LSAs not recognized by the router may be stored in the database. | 1.3.6.1.4.1.2636.5.4.1.1.3.1.1 | Unsigned32 (0..4294967295) | not-accessible | deprecated |
| jnxOspfv3AsLsdbRouterId OBJECT-TYPE The 32 bit number that uniquely identifies the originating router in the Autonomous System. | 1.3.6.1.4.1.2636.5.4.1.1.3.1.2 | JnxOspfv3RouterIdTc | not-accessible | deprecated |
| jnxOspfv3AsLsdbLsid OBJECT-TYPE The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressing semantics. | 1.3.6.1.4.1.2636.5.4.1.1.3.1.3 | Unsigned32 | not-accessible | deprecated |
| jnxOspfv3AsLsdbSequence OBJECT-TYPE The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. | 1.3.6.1.4.1.2636.5.4.1.1.3.1.4 | Integer32 | read-only | deprecated |
| jnxOspfv3AsLsdbAge OBJECT-TYPE This field is the age of the link state advertisement in seconds. | 1.3.6.1.4.1.2636.5.4.1.1.3.1.5 | Integer32 | read-only | deprecated |
| jnxOspfv3AsLsdbChecksum OBJECT-TYPE This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. | 1.3.6.1.4.1.2636.5.4.1.1.3.1.6 | Integer32 | read-only | deprecated |
| jnxOspfv3AsLsdbAdvertisement OBJECT-TYPE The entire Link State Advertisement, including its header. | 1.3.6.1.4.1.2636.5.4.1.1.3.1.7 | OCTET STRING (SIZE(1..65535)) | read-only | deprecated |
| jnxOspfv3AsLsdbTypeKnown OBJECT-TYPE Indicates whether the LSA type is recognized by this Router. | 1.3.6.1.4.1.2636.5.4.1.1.3.1.8 | TruthValue | read-only | deprecated |
| jnxOspfv3AreaLsdbTable OBJECT-TYPE The OSPFv3 Process's Area-Scope Link State Database. Marking this table and its objects deprecated as it is now implemented as a part of RFC 5643. | 1.3.6.1.4.1.2636.5.4.1.1.4 | not-accessible | deprecated | |
| jnxOspfv3AreaLsdbEntry OBJECT-TYPE A single Area-Scope Link State Advertisement. | 1.3.6.1.4.1.2636.5.4.1.1.4.1 | not-accessible | deprecated | |
| jnxOspfv3AreaLsdbAreaId OBJECT-TYPE The 32-bit identifier of the Area from which the LSA was received. | 1.3.6.1.4.1.2636.5.4.1.1.4.1.1 | JnxOspfv3AreaIdTc | not-accessible | deprecated |
| jnxOspfv3AreaLsdbType OBJECT-TYPE The type of the link state advertisement. Each link state type has a separate advertisement format. Area-Scope LSAs unrecognized by the router are also stored in this database. | 1.3.6.1.4.1.2636.5.4.1.1.4.1.2 | Unsigned32 (0..4294967295) | not-accessible | deprecated |
| jnxOspfv3AreaLsdbRouterId OBJECT-TYPE The 32-bit number that uniquely identifies the originating router in the Autonomous System. | 1.3.6.1.4.1.2636.5.4.1.1.4.1.3 | JnxOspfv3RouterIdTc | not-accessible | deprecated |
| jnxOspfv3AreaLsdbLsid OBJECT-TYPE The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressing semantics. | 1.3.6.1.4.1.2636.5.4.1.1.4.1.4 | Unsigned32 | not-accessible | deprecated |
| jnxOspfv3AreaLsdbSequence OBJECT-TYPE The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. | 1.3.6.1.4.1.2636.5.4.1.1.4.1.5 | Integer32 | read-only | deprecated |
| jnxOspfv3AreaLsdbAge OBJECT-TYPE This field is the age of the link state advertisement in seconds. | 1.3.6.1.4.1.2636.5.4.1.1.4.1.6 | Integer32 | read-only | deprecated |
| jnxOspfv3AreaLsdbChecksum OBJECT-TYPE This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. | 1.3.6.1.4.1.2636.5.4.1.1.4.1.7 | Integer32 | read-only | deprecated |
| jnxOspfv3AreaLsdbAdvertisement OBJECT-TYPE The entire Link State Advertisement, including its header. | 1.3.6.1.4.1.2636.5.4.1.1.4.1.8 | OCTET STRING (SIZE(1..65535)) | read-only | deprecated |
| jnxOspfv3AreaLsdbTypeKnown OBJECT-TYPE Indicates whether the LSA type is recognized by this Router. | 1.3.6.1.4.1.2636.5.4.1.1.4.1.9 | TruthValue | read-only | deprecated |
| jnxOspfv3LinkLsdbTable OBJECT-TYPE The OSPFv3 Process's Link-Scope Link State Database. Marking this table and its objects deprecated as it is now implemented as a part of RFC 5643. | 1.3.6.1.4.1.2636.5.4.1.1.5 | not-accessible | deprecated | |
| jnxOspfv3LinkLsdbEntry OBJECT-TYPE A single Link-Scope Link State Advertisement. | 1.3.6.1.4.1.2636.5.4.1.1.5.1 | not-accessible | deprecated | |
| jnxOspfv3LinkLsdbIfIndex OBJECT-TYPE The identifier of the link from which the LSA was received. | 1.3.6.1.4.1.2636.5.4.1.1.5.1.1 | InterfaceIndex | not-accessible | deprecated |
| jnxOspfv3LinkLsdbIfInstId OBJECT-TYPE The identifier of the interface instance from which the LSA was received. | 1.3.6.1.4.1.2636.5.4.1.1.5.1.2 | JnxOspfv3IfInstIdTc | not-accessible | deprecated |
| jnxOspfv3LinkLsdbType OBJECT-TYPE The type of the link state advertisement. Each link state type has a separate advertisement format. Link-Scope LSAs unrecognized by the router are also stored in this database. | 1.3.6.1.4.1.2636.5.4.1.1.5.1.3 | Unsigned32 (0..4294967295) | not-accessible | deprecated |
| jnxOspfv3LinkLsdbRouterId OBJECT-TYPE The 32 bit number that uniquely identifies the originating router in the Autonomous System. | 1.3.6.1.4.1.2636.5.4.1.1.5.1.4 | JnxOspfv3RouterIdTc | not-accessible | deprecated |
| jnxOspfv3LinkLsdbLsid OBJECT-TYPE The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressing semantics. | 1.3.6.1.4.1.2636.5.4.1.1.5.1.5 | Unsigned32 | not-accessible | deprecated |
| jnxOspfv3LinkLsdbSequence OBJECT-TYPE The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. | 1.3.6.1.4.1.2636.5.4.1.1.5.1.6 | Integer32 | read-only | deprecated |
| jnxOspfv3LinkLsdbAge OBJECT-TYPE This field is the age of the link state advertisement in seconds. | 1.3.6.1.4.1.2636.5.4.1.1.5.1.7 | Integer32 | read-only | deprecated |
| jnxOspfv3LinkLsdbChecksum OBJECT-TYPE This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. | 1.3.6.1.4.1.2636.5.4.1.1.5.1.8 | Integer32 | read-only | deprecated |
| jnxOspfv3LinkLsdbAdvertisement OBJECT-TYPE The entire Link State Advertisement, including its header. | 1.3.6.1.4.1.2636.5.4.1.1.5.1.9 | OCTET STRING (SIZE(1..65535)) | read-only | deprecated |
| jnxOspfv3LinkLsdbTypeKnown OBJECT-TYPE Indicates whether the LSA type is recognized by this Router. | 1.3.6.1.4.1.2636.5.4.1.1.5.1.10 | TruthValue | read-only | deprecated |
| jnxOspfv3HostTable OBJECT-TYPE The list of Hosts, and their metrics, that the router will advertise as host routes. Marking this table and its objects deprecated as it is now implemented as a part of RFC 5643. | 1.3.6.1.4.1.2636.5.4.1.1.6 | not-accessible | deprecated | |
| jnxOspfv3HostEntry OBJECT-TYPE A metric to be advertised when a given host is reachable. | 1.3.6.1.4.1.2636.5.4.1.1.6.1 | not-accessible | deprecated | |
| jnxOspfv3HostAddressType OBJECT-TYPE The address type of ospfv3HostAddress. Only IPv6 addresses without zone index are expected. | 1.3.6.1.4.1.2636.5.4.1.1.6.1.1 | InetAddressType | not-accessible | deprecated |
| jnxOspfv3HostAddress OBJECT-TYPE The IPv6 Address of the Host. Must be a Global address. | 1.3.6.1.4.1.2636.5.4.1.1.6.1.2 | InetAddress (SIZE(16)) | not-accessible | deprecated |
| jnxOspfv3HostMetric OBJECT-TYPE The Metric to be advertised. | 1.3.6.1.4.1.2636.5.4.1.1.6.1.3 | Metric | read-create | deprecated |
| jnxOspfv3HostStatus OBJECT-TYPE This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified. | 1.3.6.1.4.1.2636.5.4.1.1.6.1.4 | RowStatus | read-create | deprecated |
| jnxOspfv3HostAreaID OBJECT-TYPE The Area the Host Entry is to be found within. By default, the area that a subsuming OSPFv3 interface is in, or Area 0 | 1.3.6.1.4.1.2636.5.4.1.1.6.1.5 | JnxOspfv3AreaIdTc | read-create | deprecated |
| jnxOspfv3IfTable OBJECT-TYPE The OSPFv3 Interface Table describes the interfaces from the viewpoint of OSPFv3. Marking this table and its objects deprecated as it is now implemented as a part of RFC 5643. | 1.3.6.1.4.1.2636.5.4.1.1.7 | not-accessible | deprecated | |
| jnxOspfv3IfEntry OBJECT-TYPE The OSPFv3 Interface Entry describes one interface from the viewpoint of OSPFv3. | 1.3.6.1.4.1.2636.5.4.1.1.7.1 | not-accessible | deprecated | |
| jnxOspfv3IfIndex OBJECT-TYPE The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured. | 1.3.6.1.4.1.2636.5.4.1.1.7.1.1 | InterfaceIndex | not-accessible | deprecated |
| jnxOspfv3IfInstId OBJECT-TYPE Enables multiple interface instances of OSPFv3 to be run over a single link. Each protocol instance would be assigned a separate ID. This ID has local link significance only. | 1.3.6.1.4.1.2636.5.4.1.1.7.1.2 | JnxOspfv3IfInstIdTc | not-accessible | deprecated |
| jnxOspfv3IfAreaId OBJECT-TYPE A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0 is used for the OSPFv3 backbone. | 1.3.6.1.4.1.2636.5.4.1.1.7.1.3 | JnxOspfv3AreaIdTc | read-create | deprecated |
| jnxOspfv3IfType OBJECT-TYPE The OSPFv3 interface type. | 1.3.6.1.4.1.2636.5.4.1.1.7.1.4 | INTEGER {broadcast(1), nbma(2), pointToPoint(3), pointToMultipoint(5)} | read-create | deprecated |
| jnxOspfv3IfAdminStat OBJECT-TYPE The OSPFv3 interface's administrative status. The value formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPFv3. | 1.3.6.1.4.1.2636.5.4.1.1.7.1.5 | Status | read-create | deprecated |
| jnxOspfv3IfRtrPriority OBJECT-TYPE The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker. | 1.3.6.1.4.1.2636.5.4.1.1.7.1.6 | DesignatedRouterPriority | read-create | deprecated |
| jnxOspfv3IfTransitDelay OBJECT-TYPE The estimated number of seconds it takes to transmit a link state update packet over this interface. | 1.3.6.1.4.1.2636.5.4.1.1.7.1.7 | JnxOspfv3UpToRefreshIntervalTc | read-create | deprecated |
| jnxOspfv3IfRetransInterval OBJECT-TYPE The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link state request packets. | 1.3.6.1.4.1.2636.5.4.1.1.7.1.8 | JnxOspfv3UpToRefreshIntervalTc | read-create | deprecated |
| jnxOspfv3IfHelloInterval OBJECT-TYPE The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network. | 1.3.6.1.4.1.2636.5.4.1.1.7.1.9 | HelloRange | read-create | deprecated |
| jnxOspfv3IfRtrDeadInterval OBJECT-TYPE The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down on the interface. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network. | 1.3.6.1.4.1.2636.5.4.1.1.7.1.10 | JnxOspfv3DeadIntRangeTc | read-create | deprecated |
| jnxOspfv3IfPollInterval OBJECT-TYPE The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi-access neighbor. | 1.3.6.1.4.1.2636.5.4.1.1.7.1.11 | Unsigned32 | read-create | deprecated |
| jnxOspfv3IfState OBJECT-TYPE The OSPFv3 Interface State. | 1.3.6.1.4.1.2636.5.4.1.1.7.1.12 | INTEGER {down(1), loopback(2), waiting(3), pointToPoint(4), designatedRouter(5), backupDesignatedRouter(6), otherDesignatedRouter(7)} | read-only | deprecated |
| jnxOspfv3IfDesignatedRouter OBJECT-TYPE The Router ID of the Designated Router. | 1.3.6.1.4.1.2636.5.4.1.1.7.1.13 | JnxOspfv3RouterIdTc | read-only | deprecated |
| jnxOspfv3IfBackupDesignatedRouter OBJECT-TYPE The Router ID of the Backup Designated Router. | 1.3.6.1.4.1.2636.5.4.1.1.7.1.14 | JnxOspfv3RouterIdTc | read-only | deprecated |
| jnxOspfv3IfEvents OBJECT-TYPE The number of times this OSPF interface has changed its state, or an error has occurred. | 1.3.6.1.4.1.2636.5.4.1.1.7.1.15 | Counter32 | read-only | deprecated |
| jnxOspfv3IfStatus OBJECT-TYPE This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified. | 1.3.6.1.4.1.2636.5.4.1.1.7.1.16 | RowStatus | read-create | deprecated |
| jnxOspfv3IfMulticastForwarding OBJECT-TYPE The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link unicasts. Data link multicasting is not meaningful on point to point and NBMA interfaces, and setting ospfv3MulticastForwarding to 0 effectively disables all multicast forwarding. | 1.3.6.1.4.1.2636.5.4.1.1.7.1.17 | INTEGER {blocked(1), multicast(2), unicast(3)} | read-create | deprecated |
| jnxOspfv3IfDemand OBJECT-TYPE Indicates whether Demand OSPFv3 procedures (hello suppression to FULL neighbors and setting the DoNotAge flag on propagated LSAs) should be performed on this interface. | 1.3.6.1.4.1.2636.5.4.1.1.7.1.18 | TruthValue | read-create | deprecated |
| jnxOspfv3IfMetricValue OBJECT-TYPE The metric assigned to this interface. The default value of the Metric is Reference Bandwidth / ifSpeed. The value of the reference bandwidth is configured by the ospfv3ReferenceBandwidth object. | 1.3.6.1.4.1.2636.5.4.1.1.7.1.19 | Metric | read-create | deprecated |
| jnxOspfv3IfLinkScopeLsaCount OBJECT-TYPE The total number of Link-Scope link state advertisements in this link's link state database. | 1.3.6.1.4.1.2636.5.4.1.1.7.1.20 | Gauge32 | read-only | deprecated |
| jnxOspfv3IfLinkLsaCksumSum OBJECT-TYPE The 32-bit unsigned sum of the Link-Scope link state advertisements' LS checksums contained in this link's link state database. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link state database of two routers. | 1.3.6.1.4.1.2636.5.4.1.1.7.1.21 | Integer32 | read-only | deprecated |
| jnxOspfv3IfDemandNbrProbe OBJECT-TYPE Indicates whether or not neighbor probing is enabled to determine whether or not the neighbor is inactive. Neighbor probing is disabled by default. | 1.3.6.1.4.1.2636.5.4.1.1.7.1.22 | TruthValue | read-create | deprecated |
| jnxOspfv3IfDemandNbrProbeRetxLimit OBJECT-TYPE The number of consecutive LSA retransmissions before the neighbor is deemed inactive and the neighbor adjacency is brought down. | 1.3.6.1.4.1.2636.5.4.1.1.7.1.23 | Unsigned32 | read-create | deprecated |
| jnxOspfv3IfDemandNbrProbeInterval OBJECT-TYPE Defines how often the neighbor will be probed. | 1.3.6.1.4.1.2636.5.4.1.1.7.1.24 | Unsigned32 | read-create | deprecated |
| jnxOspfv3VirtIfTable OBJECT-TYPE Information about this router's virtual interfaces. Marking this table and its objects deprecated as it is now implemented as a part of RFC 5643. | 1.3.6.1.4.1.2636.5.4.1.1.8 | not-accessible | deprecated | |
| jnxOspfv3VirtIfEntry OBJECT-TYPE Information about a single Virtual Interface. | 1.3.6.1.4.1.2636.5.4.1.1.8.1 | not-accessible | deprecated | |
| jnxOspfv3VirtIfAreaId OBJECT-TYPE The Transit Area that the Virtual Link traverses. By definition, this is not Area 0 | 1.3.6.1.4.1.2636.5.4.1.1.8.1.1 | JnxOspfv3AreaIdTc | not-accessible | deprecated |
| jnxOspfv3VirtIfNeighbor OBJECT-TYPE The Router ID of the Virtual Neighbor. | 1.3.6.1.4.1.2636.5.4.1.1.8.1.2 | JnxOspfv3RouterIdTc | not-accessible | deprecated |
| jnxOspfv3VirtIfIndex OBJECT-TYPE The local interface index assigned to this OSPFv3 virtual interface. It is advertised in Hello's sent over the virtal link and in the router's router-LSAs. | 1.3.6.1.4.1.2636.5.4.1.1.8.1.3 | InterfaceIndex | read-only | deprecated |
| jnxOspfv3VirtIfInstId OBJECT-TYPE Specifies the interface instance ID to be used for the virtual interface. This ID has local link significance only. | 1.3.6.1.4.1.2636.5.4.1.1.8.1.4 | JnxOspfv3IfInstIdTc | read-create | deprecated |
| jnxOspfv3VirtIfTransitDelay OBJECT-TYPE The estimated number of seconds it takes to transmit a link state update packet over this interface. | 1.3.6.1.4.1.2636.5.4.1.1.8.1.5 | JnxOspfv3UpToRefreshIntervalTc | read-create | deprecated |
| jnxOspfv3VirtIfRetransInterval OBJECT-TYPE The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link state request packets. This value should be well over the expected round-trip time. | 1.3.6.1.4.1.2636.5.4.1.1.8.1.6 | JnxOspfv3UpToRefreshIntervalTc | read-create | deprecated |
| jnxOspfv3VirtIfHelloInterval OBJECT-TYPE The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor. | 1.3.6.1.4.1.2636.5.4.1.1.8.1.7 | HelloRange | read-create | deprecated |
| jnxOspfv3VirtIfRtrDeadInterval OBJECT-TYPE The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor. | 1.3.6.1.4.1.2636.5.4.1.1.8.1.8 | JnxOspfv3DeadIntRangeTc | read-create | deprecated |
| jnxOspfv3VirtIfState OBJECT-TYPE ospf virtual interface states. The same encoding as the ospfV3IfTable is used. | 1.3.6.1.4.1.2636.5.4.1.1.8.1.9 | INTEGER {down(1), pointToPoint(4)} | read-only | deprecated |
| jnxOspfv3VirtIfEvents OBJECT-TYPE The number of state changes or error events on this Virtual Link | 1.3.6.1.4.1.2636.5.4.1.1.8.1.10 | Counter32 | read-only | deprecated |
| jnxOspfv3VirtIfStatus OBJECT-TYPE This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified. | 1.3.6.1.4.1.2636.5.4.1.1.8.1.11 | RowStatus | read-create | deprecated |
| jnxOspfv3VirtIfLinkScopeLsaCount OBJECT-TYPE The total number of Link-Scope link state advertisements in this virtual link's link state database. | 1.3.6.1.4.1.2636.5.4.1.1.8.1.12 | Gauge32 | read-only | deprecated |
| jnxOspfv3VirtIfLinkLsaCksumSum OBJECT-TYPE The 32-bit unsigned sum of the Link-Scope link-state advertisements' LS checksums contained in this virtual link's link-state database. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link state database of two routers. | 1.3.6.1.4.1.2636.5.4.1.1.8.1.13 | Integer32 | read-only | deprecated |
| jnxOspfv3NbrTable OBJECT-TYPE A table of non-virtual neighbor information. | 1.3.6.1.4.1.2636.5.4.1.1.9 | not-accessible | deprecated | |
| jnxOspfv3NbrEntry OBJECT-TYPE The information regarding a single neighbor. | 1.3.6.1.4.1.2636.5.4.1.1.9.1 | not-accessible | deprecated | |
| jnxOspfv3NbrIfIndex OBJECT-TYPE The local link ID of the link over which the neighbor can be reached. | 1.3.6.1.4.1.2636.5.4.1.1.9.1.1 | InterfaceIndex | not-accessible | deprecated |
| jnxOspfv3NbrIfInstId OBJECT-TYPE Interface instance over which the neighbor can be reached. This ID has local link significance only. | 1.3.6.1.4.1.2636.5.4.1.1.9.1.2 | JnxOspfv3IfInstIdTc | not-accessible | deprecated |
| jnxOspfv3NbrRtrId OBJECT-TYPE A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. | 1.3.6.1.4.1.2636.5.4.1.1.9.1.3 | JnxOspfv3RouterIdTc | not-accessible | deprecated |
| jnxOspfv3NbrAddressType OBJECT-TYPE The address type of ospfv3NbrAddress. Only IPv6 addresses without zone index are expected. | 1.3.6.1.4.1.2636.5.4.1.1.9.1.4 | InetAddressType | read-only | deprecated |
| jnxOspfv3NbrAddress OBJECT-TYPE The IPv6 address of the neighbor associated with the local link. | 1.3.6.1.4.1.2636.5.4.1.1.9.1.5 | InetAddress (SIZE(16)) | read-only | deprecated |
| jnxOspfv3NbrOptions OBJECT-TYPE A Bit Mask corresponding to the neighbor's options field. | 1.3.6.1.4.1.2636.5.4.1.1.9.1.6 | Integer32 | read-only | deprecated |
| jnxOspfv3NbrPriority OBJECT-TYPE The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network. | 1.3.6.1.4.1.2636.5.4.1.1.9.1.7 | DesignatedRouterPriority | read-only | deprecated |
| jnxOspfv3NbrState OBJECT-TYPE The State of the relationship with this Neighbor. | 1.3.6.1.4.1.2636.5.4.1.1.9.1.8 | INTEGER {down(1), attempt(2), init(3), twoWay(4), exchangeStart(5), exchange(6), loading(7), full(8)} | read-only | deprecated |
| jnxOspfv3NbrEvents OBJECT-TYPE The number of times this neighbor relationship has changed state, or an error has occurred. | 1.3.6.1.4.1.2636.5.4.1.1.9.1.9 | Counter32 | read-only | deprecated |
| jnxOspfv3NbrLsRetransQLen OBJECT-TYPE The current length of the retransmission queue. | 1.3.6.1.4.1.2636.5.4.1.1.9.1.10 | Gauge32 | read-only | deprecated |
| jnxOspfv3NbrHelloSuppressed OBJECT-TYPE Indicates whether Hellos are being suppressed to the neighbor | 1.3.6.1.4.1.2636.5.4.1.1.9.1.11 | TruthValue | read-only | deprecated |
| jnxOspfv3NbrIfId OBJECT-TYPE The interface ID that the neighbor advertises in its Hello Packets on this link, that is, the neighbor's local interface index. | 1.3.6.1.4.1.2636.5.4.1.1.9.1.12 | InterfaceIndex | read-only | deprecated |
| jnxOspfv3NbrRestartHelperStatus OBJECT-TYPE Indicates whether the router is acting as a Graceful restart helper for the neighbor. | 1.3.6.1.4.1.2636.5.4.1.1.9.1.13 | INTEGER {notHelping(1), helping(2)} | read-only | deprecated |
| jnxOspfv3NbrRestartHelperAge OBJECT-TYPE Remaining time in current OSPF Graceful restart interval, if the router is acting as a restart helper for the neighbor. | 1.3.6.1.4.1.2636.5.4.1.1.9.1.14 | JnxOspfv3UpToRefreshIntervalTc | read-only | deprecated |
| jnxOspfv3NbrRestartHelperExitRc OBJECT-TYPE Describes the outcome of the last attempt at acting as a Graceful restart helper for the neighbor. none:............no restart has yet been attempted. inProgress:......a restart attempt is currentlyly underway. completed:.......the last restart completed successfully. timedOut:........the last restart timed out. topologyChanged:.the last restart was aborted due to a topology change. | 1.3.6.1.4.1.2636.5.4.1.1.9.1.15 | INTEGER {none(1), inProgress(2), completed(3), timedOut(4), topologyChanged(5)} | read-only | deprecated |
| jnxOspfv3CfgNbrTable OBJECT-TYPE A table of configured, non-virtual neighbor information. Marking this table and its objects deprecated as it is now implemented as a part of RFC 5643. | 1.3.6.1.4.1.2636.5.4.1.1.10 | not-accessible | deprecated | |
| jnxOspfv3CfgNbrEntry OBJECT-TYPE The information regarding a single configured neighbor or neighbor discovered by lower-level protocols such as Inverse Neighbor Discovery. | 1.3.6.1.4.1.2636.5.4.1.1.10.1 | not-accessible | deprecated | |
| jnxOspfv3CfgNbrIfIndex OBJECT-TYPE The local link ID of the link over which the neighbor can be reached. | 1.3.6.1.4.1.2636.5.4.1.1.10.1.1 | InterfaceIndex | not-accessible | deprecated |
| jnxOspfv3CfgNbrIfInstId OBJECT-TYPE Interface instance over which the neighbor can be reached. This ID has local link significance only. | 1.3.6.1.4.1.2636.5.4.1.1.10.1.2 | JnxOspfv3IfInstIdTc | not-accessible | deprecated |
| jnxOspfv3CfgNbrAddressType OBJECT-TYPE The address type of ospfv3NbrAddress. Only IPv6 addresses without zone index are expected. | 1.3.6.1.4.1.2636.5.4.1.1.10.1.3 | InetAddressType | not-accessible | deprecated |
| jnxOspfv3CfgNbrAddress OBJECT-TYPE The IPv6 address of the neighbor associated with the local link. | 1.3.6.1.4.1.2636.5.4.1.1.10.1.4 | InetAddress (SIZE(16)) | not-accessible | deprecated |
| jnxOspfv3CfgNbrPriority OBJECT-TYPE The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network. | 1.3.6.1.4.1.2636.5.4.1.1.10.1.5 | DesignatedRouterPriority | read-create | deprecated |
| jnxOspfv3CfgNbrStatus OBJECT-TYPE This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified. | 1.3.6.1.4.1.2636.5.4.1.1.10.1.6 | RowStatus | read-create | deprecated |
| jnxOspfv3VirtNbrTable OBJECT-TYPE A table of virtual neighbor information. Marking this table and its objects deprecated as it is now implemented as a part of RFC 5643. | 1.3.6.1.4.1.2636.5.4.1.1.11 | not-accessible | deprecated | |
| jnxOspfv3VirtNbrEntry OBJECT-TYPE Virtual neighbor information. | 1.3.6.1.4.1.2636.5.4.1.1.11.1 | not-accessible | deprecated | |
| jnxOspfv3VirtNbrArea OBJECT-TYPE The Transit Area Identifier. | 1.3.6.1.4.1.2636.5.4.1.1.11.1.1 | JnxOspfv3AreaIdTc | not-accessible | deprecated |
| jnxOspfv3VirtNbrRtrId OBJECT-TYPE A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. | 1.3.6.1.4.1.2636.5.4.1.1.11.1.2 | JnxOspfv3RouterIdTc | not-accessible | deprecated |
| jnxOspfv3VirtNbrIfIndex OBJECT-TYPE The local interface ID for the virtual link over which the neighbor can be reached. | 1.3.6.1.4.1.2636.5.4.1.1.11.1.3 | InterfaceIndex | read-only | deprecated |
| jnxOspfv3VirtNbrIfInstId OBJECT-TYPE The interface instance for the virtual link over which the neighbor can be reached. | 1.3.6.1.4.1.2636.5.4.1.1.11.1.4 | JnxOspfv3IfInstIdTc | read-only | deprecated |
| jnxOspfv3VirtNbrAddressType OBJECT-TYPE The address type of ospfv3VirtNbrAddress. Only IPv6 addresses without zone index are expected. | 1.3.6.1.4.1.2636.5.4.1.1.11.1.5 | InetAddressType | read-only | deprecated |
| jnxOspfv3VirtNbrAddress OBJECT-TYPE The IPv6 address advertised by this Virtual Neighbor. It must be a Global scope address. | 1.3.6.1.4.1.2636.5.4.1.1.11.1.6 | InetAddress (SIZE(16)) | read-only | deprecated |
| jnxOspfv3VirtNbrOptions OBJECT-TYPE A Bit Mask corresponding to the neighbor's options field. | 1.3.6.1.4.1.2636.5.4.1.1.11.1.7 | Integer32 | read-only | deprecated |
| jnxOspfv3VirtNbrState OBJECT-TYPE The state of the Virtual Neighbor Relationship. | 1.3.6.1.4.1.2636.5.4.1.1.11.1.8 | INTEGER {down(1), attempt(2), init(3), twoWay(4), exchangeStart(5), exchange(6), loading(7), full(8)} | read-only | deprecated |
| jnxOspfv3VirtNbrEvents OBJECT-TYPE The number of times this virtual link has changed its state, or an error has occurred. | 1.3.6.1.4.1.2636.5.4.1.1.11.1.9 | Counter32 | read-only | deprecated |
| jnxOspfv3VirtNbrLsRetransQLen OBJECT-TYPE The current length of the retransmission queue. | 1.3.6.1.4.1.2636.5.4.1.1.11.1.10 | Gauge32 | read-only | deprecated |
| jnxOspfv3VirtNbrHelloSuppressed OBJECT-TYPE Indicates whether Hellos are being suppressed to the neighbor | 1.3.6.1.4.1.2636.5.4.1.1.11.1.11 | TruthValue | read-only | deprecated |
| jnxOspfv3VirtNbrIfId OBJECT-TYPE The interface ID that the neighbor advertises in its Hello Packets on this virtual link, that is, the neighbor's local interface ID. | 1.3.6.1.4.1.2636.5.4.1.1.11.1.12 | InterfaceIndex | read-only | deprecated |
| jnxOspfv3VirtNbrRestartHelperStatus OBJECT-TYPE Indicates whether the router is acting as a Graceful restart helper for the neighbor. | 1.3.6.1.4.1.2636.5.4.1.1.11.1.13 | INTEGER {notHelping(1), helping(2)} | read-only | deprecated |
| jnxOspfv3VirtNbrRestartHelperAge OBJECT-TYPE Remaining time in current OSPF Graceful restart interval, if the router is acting as a restart helper for the neighbor. | 1.3.6.1.4.1.2636.5.4.1.1.11.1.14 | JnxOspfv3UpToRefreshIntervalTc | read-only | deprecated |
| jnxOspfv3VirtNbrRestartHelperExitRc OBJECT-TYPE Describes the outcome of the last attempt at acting as a Graceful restart helper for the neighbor. none:............no restart has yet been attempted. inProgress:......a restart attempt is currently underway. completed:.......the last restart completed successfully. timedOut:........the last restart timed out. topologyChanged:.the last restart was aborted due to a topology change. | 1.3.6.1.4.1.2636.5.4.1.1.11.1.15 | INTEGER {none(1), inProgress(2), completed(3), timedOut(4), topologyChanged(5)} | read-only | deprecated |
| jnxOspfv3AreaAggregateTable OBJECT-TYPE A range of IPv6 prefixes specified by a prefix/prefix length pair. Note that if ranges are configured such that one range subsumes another range the most specific match is the preferred one. Marking this table and its objects deprecated as it is now implemented as part of RFC 5643. | 1.3.6.1.4.1.2636.5.4.1.1.12 | not-accessible | deprecated | |
| jnxOspfv3AreaAggregateEntry OBJECT-TYPE A range of IPv6 prefixes specified by a prefix/prefix length pair. Note that if ranges are configured such that one range subsumes another range the most specific match is the preferred one. | 1.3.6.1.4.1.2636.5.4.1.1.12.1 | not-accessible | deprecated | |
| jnxOspfv3AreaAggregateAreaID OBJECT-TYPE The Area the Address Aggregate is to be found within. | 1.3.6.1.4.1.2636.5.4.1.1.12.1.1 | JnxOspfv3AreaIdTc | not-accessible | deprecated |
| jnxOspfv3AreaAggregateAreaLsdbType OBJECT-TYPE The type of the Address Aggregate. This field specifies the Area Lsdb type that this Address Aggregate applies to. | 1.3.6.1.4.1.2636.5.4.1.1.12.1.2 | INTEGER {interAreaPrefixLsa(8195), nssaExternalLsa(8199)} | not-accessible | deprecated |
| jnxOspfv3AreaAggregatePrefixType OBJECT-TYPE The prefix type of ospfv3AreaAggregatePrefix. Only IPv6 addresses are expected. | 1.3.6.1.4.1.2636.5.4.1.1.12.1.4 | InetAddressType | not-accessible | deprecated |
| jnxOspfv3AreaAggregatePrefix OBJECT-TYPE The IPv6 Prefix. | 1.3.6.1.4.1.2636.5.4.1.1.12.1.5 | InetAddress (SIZE(0..16)) | not-accessible | deprecated |
| jnxOspfv3AreaAggregatePrefixLength OBJECT-TYPE The length of the prefix (in bits). A prefix can not be shorter than 3 bits. | 1.3.6.1.4.1.2636.5.4.1.1.12.1.6 | InetAddressPrefixLength (3..128) | not-accessible | deprecated |
| jnxOspfv3AreaAggregateStatus OBJECT-TYPE This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified. | 1.3.6.1.4.1.2636.5.4.1.1.12.1.7 | RowStatus | read-create | deprecated |
| jnxOspfv3AreaAggregateEffect OBJECT-TYPE Prefixes subsumed by ranges either trigger the advertisement of the indicated aggregate (advertiseMatching), or result in the prefix not being advertised at all outside the area. | 1.3.6.1.4.1.2636.5.4.1.1.12.1.8 | INTEGER {advertiseMatching(1), doNotAdvertiseMatching(2)} | read-create | deprecated |
| jnxOspfv3AreaAggregateRouteTag OBJECT-TYPE This tag is advertised only in the summarized As-External LSA when summarizing from NSSA-LSA's to AS-External-LSA's. | 1.3.6.1.4.1.2636.5.4.1.1.12.1.9 | INTEGER | read-create | deprecated |
| jnxOspfv3NotificationEntry OBJECT-IDENTITY | 1.3.6.1.4.1.2636.5.4.1.1.13 | |||
| jnxOspfv3ConfigErrorType OBJECT-TYPE Potential types of configuration conflicts. Used by the ospfv3ConfigError and ospfv3ConfigVirtError notifications. When the last value of a notification using this object is needed, but no notifications of that type have been sent, this value pertaining to this object should be returned as noError | 1.3.6.1.4.1.2636.5.4.1.1.13.1 | INTEGER {badVersion(1), areaMismatch(2), unknownNbmaNbr(3), unknownVirtualNbr(4), helloIntervalMismatch(5), deadIntervalMismatch(6), optionMismatch(7), mtuMismatch(8), duplicateRouterId(9), noError(10)} | accessible-for-notify | deprecated |
| jnxOspfv3PacketType OBJECT-TYPE OSPFv3 packet types. When the last value of a notification using this object is needed, but no notifications of that type have been sent, the value pertaining to this object should be returned as nullPacket | 1.3.6.1.4.1.2636.5.4.1.1.13.2 | INTEGER {hello(1), dbDescript(2), lsReq(3), lsUpdate(4), lsAck(5), nullPacket(6)} | accessible-for-notify | deprecated |
| jnxOspfv3PacketSrc OBJECT-TYPE The IPv6 address of an inbound packet that cannot be identified by a neighbor instance. When the last value of a notification using this object is needed, but no notifications of that type have been sent, the value pertaining to this object should be returned as 0 Only IPv6 addresses without zone index are expected. | 1.3.6.1.4.1.2636.5.4.1.1.13.3 | InetAddress | accessible-for-notify | deprecated |
| jnxOspfv3Conformance OBJECT-IDENTITY | 1.3.6.1.4.1.2636.5.4.1.2 | |||
| jnxOspfv3Groups OBJECT-IDENTITY | 1.3.6.1.4.1.2636.5.4.1.2.1 | |||
| jnxOspfv3Compliances OBJECT-IDENTITY | 1.3.6.1.4.1.2636.5.4.1.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| jnxOspfv3VirtIfStateChange NOTIFICATION-TYPE An ospfv3VirtIfStateChange notification signifies that there has been a change in the state of an OSPFv3 virtual interface. This notification should be generated when the interface state regresses (e.g., goes from Point-to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point). | 1.3.6.1.4.1.2636.5.4.1.0.1 | deprecated |
| jnxOspfv3NbrStateChange NOTIFICATION-TYPE An ospfv3NbrStateChange notification signifies that there has been a change in the state of a non-virtual OSPFv3 neighbor. This notification should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full). When an neighbor transitions from or to Full on non-broadcast multi-access and broadcast networks, the notification should be generated by the designated router. A designated router transitioning to Down will be noted by ospfIfStateChange. | 1.3.6.1.4.1.2636.5.4.1.0.2 | deprecated |
| jnxOspfv3VirtNbrStateChange NOTIFICATION-TYPE An ospfv3VirtNbrStateChange notification signifies that there has been a change in the state of an OSPFv3 virtual neighbor. This notification should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full). | 1.3.6.1.4.1.2636.5.4.1.0.3 | deprecated |
| jnxOspfv3IfConfigError NOTIFICATION-TYPE An ospfv3IfConfigError notification signifies that a packet has been received on a non-virtual interface from a router whose configuration parameters conflict with this router's configuration parameters. Note that the event optionMismatch should cause a notification only if it prevents an adjacency from forming. | 1.3.6.1.4.1.2636.5.4.1.0.4 | deprecated |
| jnxOspfv3VirtIfConfigError NOTIFICATION-TYPE An ospfv3VirtIfConfigError notification signifies that a packet has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters. Note that the event optionMismatch should cause a notification only if it prevents an adjacency from forming. | 1.3.6.1.4.1.2636.5.4.1.0.5 | deprecated |
| jnxOspfv3IfRxBadPacket NOTIFICATION-TYPE An ospfv3IfRxBadPacket notification signifies that an ospfv3 packet that cannot be parsed has been received on a non-virtual interface. | 1.3.6.1.4.1.2636.5.4.1.0.6 | deprecated |
| jnxOspfv3VirtIfRxBadPacket NOTIFICATION-TYPE An ospfv3VirtIfRxBadPacket notification signifies that an OSPFv3 packet that cannot be parsed has been received on a virtual interface. | 1.3.6.1.4.1.2636.5.4.1.0.7 | deprecated |
| jnxOspfv3LsdbOverflow NOTIFICATION-TYPE An ospfv3LsdbOverflow notification signifies that the number of LSAs in the router's link-state database has exceeded ospfv3ExtAreaLsdbLimit. | 1.3.6.1.4.1.2636.5.4.1.0.8 | deprecated |
| jnxOspfv3LsdbApproachingOverflow NOTIFICATION-TYPE An ospfv3LsdbApproachingOverflow notification signifies that the number of LSAs in the router's link-state database has exceeded ninety percent of ospfv3ExtAreaLsdbLimit. | 1.3.6.1.4.1.2636.5.4.1.0.9 | deprecated |
| jnxOspfv3IfStateChange NOTIFICATION-TYPE An ospfv3IfStateChange notification signifies that there has been a change in the state of a non-virtual OSPFv3 interface. This notification should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup). | 1.3.6.1.4.1.2636.5.4.1.0.10 | deprecated |
| jnxOspfv3NssaTranslatorStatusChange NOTIFICATION-TYPE An ospfv3NssaTranslatorStatusChange notification indicates that there has been a change in the router's ability to translate OSPFv3 NSSA LSAs into OSPFv3 External LSAs. This notification should be generated when the Translator Status transitions from or to any defined status on a per area basis. | 1.3.6.1.4.1.2636.5.4.1.0.11 | deprecated |
| jnxOspfv3RestartStatusChange NOTIFICATION-TYPE An ospfv3RestartStatusChange notification signifies that there has been a change in the graceful restart state for the router. This notification should be generated when the router restart status changes. | 1.3.6.1.4.1.2636.5.4.1.0.12 | deprecated |
| jnxOspfv3NbrRestartHelperStatusChange NOTIFICATION-TYPE An ospfv3NbrRestartHelperStatusChange notification signifies that there has been a change in the graceful restart helper state for the neighbor. This notification should be generated when the neighbor restart helper status transitions for a neighbor. | 1.3.6.1.4.1.2636.5.4.1.0.13 | deprecated |
| jnxOspfv3VirtNbrRestartHelperStatusChange NOTIFICATION-TYPE An ospfv3VirtNbrRestartHelperStatusChange notification signifies that there has been a change in the graceful restart helper state for the virtual neighbor. This notification should be generated when the virtual neighbor restart helper status transitions for a virtual neighbor. | 1.3.6.1.4.1.2636.5.4.1.0.14 | deprecated |
Conformance
| Name | OID | Status |
|---|---|---|
| jnxOspfv3BasicGroup OBJECT-GROUP These objects are used for managing/monitoring OSPFv3 global parameters. | 1.3.6.1.4.1.2636.5.4.1.2.1.1 | deprecated |
| jnxOspfv3AreaGroup OBJECT-GROUP These objects are used for ospfv3 systems supporting areas. | 1.3.6.1.4.1.2636.5.4.1.2.1.2 | deprecated |
| jnxOspfv3AsLsdbGroup OBJECT-GROUP These objects are used for ospfv3 systems that display their AS-scope link state database. | 1.3.6.1.4.1.2636.5.4.1.2.1.3 | deprecated |
| jnxOspfv3AreaLsdbGroup OBJECT-GROUP These objects are used for OSPFv3 systems that display their Area-scope link state database. | 1.3.6.1.4.1.2636.5.4.1.2.1.4 | deprecated |
| jnxOspfv3LinkLsdbGroup OBJECT-GROUP These objects are used for OSPFv3 systems that display their Link-scope link state database. | 1.3.6.1.4.1.2636.5.4.1.2.1.5 | deprecated |
| jnxOspfv3HostGroup OBJECT-GROUP These objects are used for OSPFv3 systems that support attached hosts. | 1.3.6.1.4.1.2636.5.4.1.2.1.6 | deprecated |
| jnxOspfv3IfGroup OBJECT-GROUP These interface objects used for managing/monitoring OSPFv3 interfaces. | 1.3.6.1.4.1.2636.5.4.1.2.1.7 | deprecated |
| jnxOspfv3VirtIfGroup OBJECT-GROUP These virtual interface objects are used for managing/monitoring OSPFv3 virtual interfaces. | 1.3.6.1.4.1.2636.5.4.1.2.1.8 | deprecated |
| jnxOspfv3NbrGroup OBJECT-GROUP These neighbor objects are used for managing/monitoring OSPFv3 neighbors. | 1.3.6.1.4.1.2636.5.4.1.2.1.9 | deprecated |
| jnxOspfv3CfgNbrGroup OBJECT-GROUP These configured neighbor objects are used for managing/monitoring ospfv3 configured neighbors. | 1.3.6.1.4.1.2636.5.4.1.2.1.10 | deprecated |
| jnxOspfv3VirtNbrGroup OBJECT-GROUP These virtual neighbor objects are used for managing/monitoring OSPFv3 virtual neighbors. | 1.3.6.1.4.1.2636.5.4.1.2.1.11 | deprecated |
| jnxOspfv3AreaAggregateGroup OBJECT-GROUP These area aggregate objects used required for aggregating OSPFv3 prefixes for summarization across areas. | 1.3.6.1.4.1.2636.5.4.1.2.1.12 | deprecated |
| jnxOspfv3NotificationObjectGroup OBJECT-GROUP These objects are used to record notification parameters | 1.3.6.1.4.1.2636.5.4.1.2.1.13 | deprecated |
| jnxOspfv3NotificationGroup NOTIFICATION-GROUP This group is used for OSPFv3 notifications | 1.3.6.1.4.1.2636.5.4.1.2.1.14 | deprecated |
| jnxOspfv3Compliance MODULE-COMPLIANCE The compliance statement | 1.3.6.1.4.1.2636.5.4.1.2.2.1 | deprecated |