MIBs Depot

ONEACCESS-OAM-MIB

Registered at
1.3.6.1.4.1.13191.1.100.673
1.3.6.1.4.1.13191.10.3.2.2.1
1.3.6.1.4.1.13191.10.3.2.2.2
1.3.6.1.4.1.13191.10.3.2.2.3
Last updated
2011-10-27 00:00
Organization
OneAccess
Revisions
2011-10-27 00:00, 2010-07-08 00:01
Namespace
oneaccess
Source file
ONEACCESS-OAM-MIB
Digest
sha256:9e67bf282650502a743a5180c81e3decfc2221a7364975a5bd21beb2a6fc7b67

Description

Contact updated

Contact

Pascal KESTELOOT Postal: ONE ACCESS 381 Avenue du Général de Gaulle 92140 Clamart, France FRANCE Tel: (+33) 01 41 87 70 00 Fax: (+33) 01 41 87 74 00 E-mail: pascal.kesteloot@oneaccess-net.com

Imports

FromSymbols
ATM-MIBatmVclEntry
IF-MIBInterfaceIndex, ifIndex
ONEACCESS-GLOBAL-REGoacExpIMAtmOamStatistics, oacMIBModules
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TimeInterval, TimeStamp

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ATM-MIB
ATM-TC-MIB
IANAifType-MIB
IF-MIB
ONEACCESS-GLOBAL-REG
ONEACCESS-OAM-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
oacAtmOamStatObjects
OBJECT-IDENTITY
1.3.6.1.4.1.13191.10.3.2.2.1
oacAtmOamStatSwitch
OBJECT-IDENTITY
1.3.6.1.4.1.13191.10.3.2.2.1.1
oacAtmOamSwitchMaxConnections
OBJECT-TYPE
Maximum number of authorised OAM configured connections
1.3.6.1.4.1.13191.10.3.2.2.1.1.1Unsigned32read-onlycurrent
oacAtmOamSwitchSegLoopback
OBJECT-TYPE
Enable segment loopback on this switch
1.3.6.1.4.1.13191.10.3.2.2.1.1.2INTEGER {enable(1), disable(2)}read-onlycurrent
oacAtmOamSwitchEndLoopback
OBJECT-TYPE
Enable end to end loopback on this switch
1.3.6.1.4.1.13191.10.3.2.2.1.1.3INTEGER {enable(1), disable(2)}read-onlycurrent
oacAtmOamSwitchAisRdiEnable
OBJECT-TYPE
Enable Remote Defect Indication OAM cell generation if an Alarm Indication Signal OAM cell is received, or if a defect is detected on the switch
1.3.6.1.4.1.13191.10.3.2.2.1.1.4INTEGER {enable(1), disable(2)}read-onlycurrent
oacAtmOamSwitchSegmentContinuityCheckEnable
OBJECT-TYPE
Enable Segment Loss of Continuity cells defect on the pvc. Enable generation of segment Continuity Check cells on the switch.
1.3.6.1.4.1.13191.10.3.2.2.1.1.5INTEGER {enable(1), disable(2)}read-onlycurrent
oacAtmOamSwitchEndContinuityCheckEnable
OBJECT-TYPE
Enable End to End Loss of Continuity cells defect on the pvc. Enable generation of End to End Continuity Check cells on the switch.
1.3.6.1.4.1.13191.10.3.2.2.1.1.6INTEGER {enable(1), disable(2)}read-onlycurrent
oacAtmOamSwitchOamCellsReceived
OBJECT-TYPE
Number of received OAM cells on the switch
1.3.6.1.4.1.13191.10.3.2.2.1.1.7Counter32read-onlycurrent
oacAtmOamSwitchOamCellsTransmitted
OBJECT-TYPE
Number of transmitted OAM cells on the switch
1.3.6.1.4.1.13191.10.3.2.2.1.1.8Counter32read-onlycurrent
oacAtmOamSwitchCurrentConnections
OBJECT-TYPE
Current number of OAM configured connections
1.3.6.1.4.1.13191.10.3.2.2.1.1.9Unsigned32read-onlycurrent
oacAtmOamVclTable
OBJECT-TYPE
An index into the table oacAtmOamVclTable
1.3.6.1.4.1.13191.10.3.2.2.1.2not-accessiblecurrent
oacAtmOamVclEntry
OBJECT-TYPE
An index into the table oacAtmOamVclTable
1.3.6.1.4.1.13191.10.3.2.2.1.2.1not-accessiblecurrent
oacAtmOamVclPvcManage
OBJECT-TYPE
Enable OAM for Pvc management
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.1INTEGER {enable(1), disable(2)}read-onlycurrent
oacAtmOamVclSegmentLoopback
OBJECT-TYPE
Enable segment loopback on this virtual channel
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.2INTEGER {enable(1), disable(2)}read-onlycurrent
oacAtmOamVclEndLoopback
OBJECT-TYPE
Enable end to end loopback on this virtual channel
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.3INTEGER {enable(1), disable(2)}read-onlycurrent
oacAtmOamVclAisRdiEnable
OBJECT-TYPE
Enable Remote Defect Indication OAM cell generation if an Alarm Indication Signal OAM cell is received, or if a defect is detected on the PVC
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.4INTEGER {enable(1), disable(2)}read-onlycurrent
oacAtmOamVclSegmentContinuityCheckEnable
OBJECT-TYPE
Enable Segment Loss of Continuity cells detect on the PVC.Enable generation of Segment Continuity Check cells on the PVC.
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.5INTEGER {enable(1), disable(2)}read-onlycurrent
oacAtmOamVclEndContinuityCheckEnable
OBJECT-TYPE
Enable End to End Loss of Continuity cells detect on the PVC.Enable generation of End to End Continuity Check cells on the PVC.
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.6INTEGER {enable(1), disable(2)}read-onlycurrent
oacAtmOamVclLoopbackTxInterval
OBJECT-TYPE
Frequency of OAM loopback cell are generated on this virtual channel
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.7Integer32read-onlycurrent
oacAtmOamVclLoopbackTxRetryFrequency
OBJECT-TYPE
Frequency of OAM loopback cell are generated on this virtual channel, when a change has occured, that is to say either no reception of the last loopback cell, or reception of the last loopback cell
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.8Integer32read-onlycurrent
oacAtmOamVclLoopbackTxRetryUpCount
OBJECT-TYPE
Counter of consecutive received loopback cells, before vcl is considered as being up
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.9Integer32read-onlycurrent
oacAtmOamVclLoopbackTxRetryDownCount
OBJECT-TYPE
Counter of consecutive non received loopback cells, before vcl is considered as being down
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.10Integer32read-onlycurrent
oacAtmOamVclAlarmState
OBJECT-TYPE
This object indicates the current alarm status of the VCL, when error monitoring is activated on the VCL. Value indicates the different alarm states tha the VCL can take. Those alarms can be combined together. The unknown state indicates that the alarm status of this VCL cannot be determined. cc_seg_loc(1),cc_ete_loc(2), lb_seg_alarm(4),lb_ete_alarm(8), ais_alarm(16),rdi_alarm(32),other(64)
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.11Integer32read-onlycurrent
oacAtmOamVclAlarmStateLastChange
OBJECT-TYPE
The value of sysUpTime object at the time this VCL entered its current alarm status. If the current state was entered prior to the last re-initialization of the agent, then this object contains a zero value.
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.12TimeStampread-onlycurrent
oacAtmOamVclAisRdiRetryDownCount
OBJECT-TYPE
Number of consecutive OAM AIS/RDI cells received. The range is 3 to 60. The default is 3.
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.13Integer32read-onlycurrent
oacAtmOamVclAisRdiRetryUpTimer
OBJECT-TYPE
Number of seconds with no OAM AIS/RDI cells received. The range is 3 to 60 seconds . The default is 3 seconds.
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.14Integer32read-onlycurrent
oacAtmOamVclPvcIntrusive
OBJECT-TYPE
Enable OAM Intrusivity against Pvc
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.15INTEGER {enable(1), disable(2)}read-onlycurrent
oacAtmOamVclCountersTable
OBJECT-TYPE
An index into table oacAtmOamVclCountersTable
1.3.6.1.4.1.13191.10.3.2.2.1.3not-accessiblecurrent
oacAtmOamVclCountersEntry
OBJECT-TYPE
An index into table oacAtmOamVclCountersTable
1.3.6.1.4.1.13191.10.3.2.2.1.3.1not-accessiblecurrent
oacAtmOamVclOamCellsReceived
OBJECT-TYPE
Number of received oam cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.1Counter32read-onlycurrent
oacAtmOamVclEndLoopbackIn
OBJECT-TYPE
Number of received non looped end to end oam loopback cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.2Counter32read-onlycurrent
oacAtmOamVclSegLoopbackIn
OBJECT-TYPE
Number of received non looped segment oam loopback cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.3Counter32read-onlycurrent
oacAtmOamVclEndLoopIn
OBJECT-TYPE
Number of received looped end to end oam loopback cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.4Counter32read-onlycurrent
oacAtmOamVclSegLoopIn
OBJECT-TYPE
Number of received looped segment oam loopback cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.5Counter32read-onlycurrent
oacAtmOamVclAisIn
OBJECT-TYPE
Number of received oam ais cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.6Counter32read-onlycurrent
oacAtmOamVclRdiIn
OBJECT-TYPE
Number of received oam rdi cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.7Counter32read-onlycurrent
oacAtmOamVclSegCCIn
OBJECT-TYPE
Number of received oam end to end continuity check cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.8Counter32read-onlycurrent
oacAtmOamVclEndCCIn
OBJECT-TYPE
Number of received oam segment continuity check cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.9Counter32read-onlycurrent
oacAtmOamVclOamCellsSent
OBJECT-TYPE
Number of sent oam cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.10Counter32read-onlycurrent
oacAtmOamVclEndLoopbackOut
OBJECT-TYPE
Number of sent non looped end to end oam loopback cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.11Counter32read-onlycurrent
oacAtmOamVclSegLoopbackOut
OBJECT-TYPE
Number of sent non looped segment oam loopback cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.12Counter32read-onlycurrent
oacAtmOamVclEndLoopOut
OBJECT-TYPE
Number of sent looped end to end oam loopback cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.13Counter32read-onlycurrent
oacAtmOamVclSegLoopOut
OBJECT-TYPE
Number of sent looped segment oam loopback cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.14Counter32read-onlycurrent
oacAtmOamVclAisOut
OBJECT-TYPE
Number of sent oam ais cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.15Counter32read-onlycurrent
oacAtmOamVclRdiOut
OBJECT-TYPE
Number of sent oam rdi cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.16Counter32read-onlycurrent
oacAtmOamVclSegCCOut
OBJECT-TYPE
Number of sent oam end to end continuity check cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.17Counter32read-onlycurrent
oacAtmOamVclEndCCOut
OBJECT-TYPE
Number of sent oam segment continuity check cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.18Counter32read-onlycurrent
oacAtmOamVclOamCellsDropped
OBJECT-TYPE
Number of received oam cells that are ignored and dropped
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.19Counter32read-onlycurrent
oacAtmOamStatNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.13191.10.3.2.2.2
oacAtmOamStatConformance
OBJECT-IDENTITY
1.3.6.1.4.1.13191.10.3.2.2.3
oacAtmOamStatGroups
OBJECT-IDENTITY
1.3.6.1.4.1.13191.10.3.2.2.3.1
oacAtmOamStatCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.13191.10.3.2.2.3.2

Conformance

NameOIDStatus
oacAtmOamStatGeneralGroup
OBJECT-GROUP
This group is mandatory for all OAM entities.
1.3.6.1.4.1.13191.10.3.2.2.3.1.1current
oacAtmOamStatCompliance
MODULE-COMPLIANCE
The compliance statement for agents that support the ONEACCESS-OAM-MIB.
1.3.6.1.4.1.13191.10.3.2.2.3.2.1current