OMNITRON-POE-MIB
- Registered at
- 1.3.6.1.4.1.7342.15
- Last updated
- 2015-01-19 12:00
- Organization
- Omnitron Systems Technology, Inc.
- Revisions
- 2015-01-19 12:00
- Namespace
- omnitron
- Source file
OMNITRON-POE-MIB- Digest
sha256:facc4e4a8a3ec0e2b2f3669b970682fa544ac907158388629de9db79f641de7a
Description
Omnitron PoE MIB for use with iConverter Management Modules v5.2 and NetOutlook. Copyright 2015 Omnitron Systems Technology, Inc. All rights reserved.
Contact
Omnitron Systems Technology, Inc. 38 Tesla Irvine, CA 92618-4670 USA Tel: (949) 250 6510 Fax: (949) 250 6514 E-mail: info@omnitron-systems.com International: +1 949 250 6510 Technical Support and Customer Service Tel: (800) 675 8410 E-mail: support@omnitron-systems.com International: +1 949 250 6510
Imports
| From | Symbols |
|---|---|
| OMNITRON-TC-MIB | OstFloatValue, OstPortSingleIndex, omnitron |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
OMNITRON-POE-MIB OMNITRON-TC-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ostPoeGlobalCfgTable OBJECT-IDENTITY | 1.3.6.1.4.1.7342.15.1 | |||
| ostPoeGlobalCfgPwrLimitationEnable OBJECT-TYPE This object specifies whether the PoE PSE power limiting function is enabled. The value 'true' indicates that PoE PSE limiting is enabled. The value 'false' indicates that PoE PSE limiting is disabled. | 1.3.6.1.4.1.7342.15.1.1 | TruthValue | read-write | current |
| ostPoeGlobalCfgTotalPwr OBJECT-TYPE This object indicates the total power sourced in Watts. | 1.3.6.1.4.1.7342.15.1.2 | OstFloatValue | read-only | current |
| ostPoePortCfgTable OBJECT-TYPE This table supports the port PoE configurations. | 1.3.6.1.4.1.7342.15.2 | not-accessible | current | |
| ostPoePortCfgEntry OBJECT-TYPE This is a PoE port configuration table entry. | 1.3.6.1.4.1.7342.15.2.1 | not-accessible | current | |
| ostPoePortCfgIndex OBJECT-TYPE An index that is used to identify a specific PoE port number. | 1.3.6.1.4.1.7342.15.2.1.1 | OstPortSingleIndex | not-accessible | current |
| ostPoePortPseEnable OBJECT-TYPE This object is the PoE PSE port enable. pseDisabled(1) PSE power source is disabled pseEnabled(2) PSE power source is enabled | 1.3.6.1.4.1.7342.15.2.1.2 | INTEGER {pseDisabled(1), pseEnabled(2)} | read-write | current |
| ostPoePortPse60wMode OBJECT-TYPE The object is the PoE PSE 60W mode enable. This is the same control as the physical DIP switch. pse60wNotAvail PSE 60W function not available pse60wAuto(1) PSE 60W auto mode enabled pse60wForce(2) PSE 60W force mode enabled | 1.3.6.1.4.1.7342.15.2.1.3 | INTEGER {pse60wNotAvail(0), pse60wAuto(1), pse60wForce(2)} | read-write | current |
| ostPoePortPdMode OBJECT-TYPE This object is the PoE PD classification mode. pdModeNotDetected(1) PD is not detected pdModeNotClassified(2) PD is not classified pdModeFailure(3) PD classification failure pdModeClass0(4) PD is 802.3af Class 0 15W device pdModeClass1(5) PD is 802.3af Class 1 4W device pdModeClass2(6) PD is 802.3af Class 2 7W device pdModeClass3(7) PD is 802.3af Class 3 15W device pdModeClass4(8) PD is 802.3at Class 4 30W device pdMode60W(9) PD is 60W device | 1.3.6.1.4.1.7342.15.2.1.4 | INTEGER {pdModeNotDetected(1), pdModeNotClassified(2), pdModeFailure(3), pdModeClass0(4), pdModeClass1(5), pdModeClass2(6), pdModeClass3(7), pdModeClass4(8), pdMode60W(9)} | read-only | current |
| ostPoePortPseVoltageSupplied OBJECT-TYPE This object indicates the voltage output from the PSE port in volts. | 1.3.6.1.4.1.7342.15.2.1.5 | OstFloatValue | read-only | current |
| ostPoePortPseCurrentSupplied OBJECT-TYPE This object indicates the current output from the PSE port in mA (milliamps). | 1.3.6.1.4.1.7342.15.2.1.6 | OstFloatValue | read-only | current |
| ostPoePortPseStatus OBJECT-TYPE This object is the PoE PSE port status. notApplicable(1) PD device not connected or port disabled pdNormal(2) PD device is being powered fully pdOverCurrent(3) PD device is consuming too much current pdBrownOut(4) PD device is not fully powered pdInsufficientPower(5) PD device not powered due to lack of power A write to this object restarts the PSE function and classification. | 1.3.6.1.4.1.7342.15.2.1.7 | INTEGER {notApplicable(1), pdNormal(2), pdOverCurrent(3), pdBrownOut(4), pdInsufficientPower(5)} | read-write | current |
| ostPoePortHeartbeatEnable OBJECT-TYPE This object is the PoE PSE heartbeat enable. heartbeatDisabled(1) PSE PD heartbeat is disabled heartbeatEnabled(2) PSE PD heartbeat is enabled | 1.3.6.1.4.1.7342.15.2.1.8 | INTEGER {heartbeatDisabled(1), heartbeatEnabled(2)} | read-write | current |
| ostPoePortHeartbeatIpAddress OBJECT-TYPE This object is the PoE PD heartbeat IP address to ping. | 1.3.6.1.4.1.7342.15.2.1.9 | IpAddress | read-write | current |
| ostPoePortHeartbeatInterval OBJECT-TYPE This object is the PoE PSE PD heartbeat transmission interval in seconds. | 1.3.6.1.4.1.7342.15.2.1.10 | Unsigned32 (1..300) | read-write | current |
| ostPoePortHeartbeatErrorDetection OBJECT-TYPE This object is the PoE PSE PD heartbeat number of consecutively lost heartbeat pings before an errored condition is declared. The number of consecutive error counts is cleared when a valid heartbeat response is received. | 1.3.6.1.4.1.7342.15.2.1.11 | Unsigned32 (1..100) | read-write | current |
| ostPoePortHeartbeatErrorAction OBJECT-TYPE This object is the PoE PSE heartbeat errored condition action. errorLostIgnored(1) PD heartbeat errored condition is ignored errorRestart(2) PD heartbeat errored condition results in a restart errorShutdown(3) PD heartbeat errored condition results in a shutdown (power removed) | 1.3.6.1.4.1.7342.15.2.1.12 | INTEGER {errorLostIgnored(1), errorRestart(2), errorShutdown(3)} | read-write | current |
| ostPoePortHeartbeatNumberRestarts OBJECT-TYPE This object is the PoE PSE PD number of restarts when an errored hearbeat condition occurs. This object is only used when ostPoePortHeartbeatErrorAction is configured as 'errorRestart' A value of zero indicates restarts never stop. | 1.3.6.1.4.1.7342.15.2.1.13 | Unsigned32 (0..16384) | read-write | current |
| ostPoEPortHeartbeatStatus OBJECT-TYPE This object is the PoE PSE PD heartbeat status. heartbeatDisabled(1) PSE PD heartbeat is disabled heartbeatAvailable(2) PSE PD heartbeats are being received heartbeatErrored(3) PSE PD heartbeat is in an errored condition heartbeatRestart(4) PSE PD heartbeat error has caused a PSE restart heartbeatShutdown(5) PSE PD heartbeat error has caused a PSE shutdown | 1.3.6.1.4.1.7342.15.2.1.14 | INTEGER {heartbeatDisabled(1), heartbeatAvailable(2), heartbeatErrored(3), heartbeatRestart(4), heartbeatShutdown(5)} | read-only | current |
| ostPoEPortHeartbeatDeferTime OBJECT-TYPE This object is the PoE heartbeat PSE PD heartbeat transmission delay interval in seconds after the port has been reenabled. The delay is the amount of time after power has been applied before the heartbeat function starts and hence the detection of heartbeat errors. | 1.3.6.1.4.1.7342.15.2.1.15 | Unsigned32 (1..300) | read-write | current |
| ostPoeCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.7342.15.3 | |||
| ostPoeGroups OBJECT-IDENTITY | 1.3.6.1.4.1.7342.15.4 |
Conformance
| Name | OID | Status |
|---|---|---|
| ostPoeCompliance MODULE-COMPLIANCE The compliance statement for the Omnitron PoE MIB. | 1.3.6.1.4.1.7342.15.3.2 | current |
| ostPoeGroup OBJECT-GROUP Mandatory objects for the PoE functional group. | 1.3.6.1.4.1.7342.15.4.1 | current |