OCCAM-ENTITY-MIB
- Registered at
- 1.3.6.1.4.1.6066.2.1.3.1
- Last updated
- 2007-10-02 00:00
- Organization
- Occam Networks
- Revisions
- 2009-09-10 00:00, 2007-10-02 00:00, 2007-09-20 00:00, 1999-12-07 00:00
- Namespace
- calix
- Source file
OCCAM-ENTITY-MIB- Digest
sha256:768e9270ebd8d4f18ebc5d40dc325aa2abffa0486ecf6cb73ff83cded858d9a0
Description
The MIB module for representing multiple logical entities supported by a single SNMP agent.
Contact
email support@occamnetworks.com
Imports
| From | Symbols |
|---|---|
| OCCAM-REG-MODULE | occamGenericHardwareModules |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso, mib-2 |
| SNMPv2-TC | AutonomousType, DateAndTime, DisplayString, MacAddress, PhysAddress, RowPointer, TAddress, TDomain, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
OCCAM-ENTITY-MIB OCCAM-REG-MODULE SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| PhysicalIndex TEXTUAL-CONVENTION An arbitrary value which uniquely identifies the physical entity. The value should be a small non-negative integer; index values for different physical entities are not necessarily contiguous. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| org OBJECT-IDENTITY | 1.3 | |||
| dod OBJECT-IDENTITY | 1.3.6 | |||
| internet OBJECT-IDENTITY | 1.3.6.1 | |||
| mgmt OBJECT-IDENTITY | 1.3.6.1.2 | |||
| entityMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.6066.2.1.3.1.1 | |||
| entityCompanyName OBJECT-TYPE The name of the Company which built the product. In our case it is Occam Networks Inc. | 1.3.6.1.4.1.6066.2.1.3.1.1.1 | SnmpAdminString | read-only | current |
| entityMacAddress OBJECT-TYPE This object contains the MAC Address of an ethernet interface. For other physical entities it is an octet string of length 0 | 1.3.6.1.4.1.6066.2.1.3.1.1.2 | MacAddress | read-only | current |
| entityBoardName OBJECT-TYPE The textual name of the Board. | 1.3.6.1.4.1.6066.2.1.3.1.1.3 | SnmpAdminString | read-only | current |
| entityBoardAssembly OBJECT-TYPE An in-house classification of the board. | 1.3.6.1.4.1.6066.2.1.3.1.1.4 | SnmpAdminString | read-only | current |
| entityBoardType OBJECT-TYPE The type of board that is present. | 1.3.6.1.4.1.6066.2.1.3.1.1.5 | SnmpAdminString | read-only | current |
| entitySerialNum OBJECT-TYPE The vendor-specific serial number string for the physical entity. | 1.3.6.1.4.1.6066.2.1.3.1.1.6 | SnmpAdminString (SIZE(0..32)) | read-only | current |
| entityHardwareRev OBJECT-TYPE The vendor-specific hardware revision string for the physical entity. The preferred value is the hardware revision identifier actually printed on the component itself (if present). Note that if revision information is stored internally in a non-printable (e.g., binary) format, then the agent must convert such information to a printable format, in an implementation- specific manner. If no specific hardware revision string is associated with the physical component, or this information is unknown to the agent, then this object will contain a zero-length string. | 1.3.6.1.4.1.6066.2.1.3.1.1.7 | SnmpAdminString | read-only | current |
| entityFirmwareRev OBJECT-TYPE The vendor-specific firmware revision string for the physical entity. Note that if revision information is stored internally in a non-printable (e.g., binary) format, then the agent must convert such information to a printable format, in an implementation- specific manner. If no specific firmware programs are associated with the physical component, or this information is unknown to the agent, then this object will contain a zero-length string. | 1.3.6.1.4.1.6066.2.1.3.1.1.8 | SnmpAdminString | read-only | current |
| entitySoftwareRev OBJECT-TYPE The vendor-specific software revision string for the physical entity. Note that if revision information is stored internally in a non-printable (e.g., binary) format, then the agent must convert such information to a printable format, in an implementation- specific manner. If no specific software programs are associated with the physical component, or this information is unknown to the agent, then this object will contain a zero-length string. | 1.3.6.1.4.1.6066.2.1.3.1.1.9 | SnmpAdminString | read-only | current |
| entityMfgDate OBJECT-TYPE The date when this physical component was manufactured. The preferred value is the manufacturer date printed on the component itself(if present). If the manufacturer date associated with the physical component is unknown to the agent, then this object will contain a zero-length string. | 1.3.6.1.4.1.6066.2.1.3.1.1.10 | SnmpAdminString | read-only | current |
| entityPortTable OBJECT-TYPE This table contains one row per port entity. | 1.3.6.1.4.1.6066.2.1.3.1.1.11 | not-accessible | current | |
| entityPortEntry OBJECT-TYPE Information about a particular port. | 1.3.6.1.4.1.6066.2.1.3.1.1.11.1 | not-accessible | current | |
| entityPortShelfIndex OBJECT-TYPE The shelf number which contains the slot that contains this port. | 1.3.6.1.4.1.6066.2.1.3.1.1.11.1.1 | PhysicalIndex | read-only | current |
| entityPortSlotIndex OBJECT-TYPE The slot number associated with this port. | 1.3.6.1.4.1.6066.2.1.3.1.1.11.1.2 | PhysicalIndex | read-only | current |
| entityPortIndex OBJECT-TYPE The number of the port in the slot specified by entitySlotIndex, and the shelf specified by entityShelfIndex. | 1.3.6.1.4.1.6066.2.1.3.1.1.11.1.3 | PhysicalIndex | read-only | current |
| entityPortName OBJECT-TYPE The textual name of the port. The value of this object should be the name as assigned by the local device and should be suitable for usein commands entered at the device's console. | 1.3.6.1.4.1.6066.2.1.3.1.1.11.1.4 | SnmpAdminString | read-only | current |
| entitySoftwareRevExt OBJECT-TYPE The Occam software revision extension in 'TagTagrev_SuffixSuffixrev' format (i.e. R3_P1). In this example the Tag is R, the Tagrev is 3, the Suffix is P, and the Suffixrev is 1. | 1.3.6.1.4.1.6066.2.1.3.1.1.13 | SnmpAdminString | read-only | current |
| entityOntSlotId OBJECT-TYPE The slot identifier configured on this entity, intended for within a daisy chained application. This object is applicable to active ONTs. | 1.3.6.1.4.1.6066.2.1.3.1.1.14 | SnmpAdminString | read-only | current |
| entityMIBTraps OBJECT-IDENTITY | 1.3.6.1.4.1.6066.2.1.3.1.2 | |||
| entityMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.6066.2.1.3.1.3 | |||
| entityMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.6066.2.1.3.1.3.1 | |||
| entityMIBObjGroups OBJECT-IDENTITY | 1.3.6.1.4.1.6066.2.1.3.1.3.1.1 | |||
| entityMIBEventGroups OBJECT-IDENTITY | 1.3.6.1.4.1.6066.2.1.3.1.3.1.2 | |||
| entityMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.6066.2.1.3.1.3.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| entityPhysicalGroup OBJECT-GROUP The collection of objects which are used to represent the physical system for which a single agent provides management information. | 1.3.6.1.4.1.6066.2.1.3.1.3.1.1.1 | current |
| entityCompliance MODULE-COMPLIANCE The compliance statement for SNMP entities which implement the Entity MIB. | 1.3.6.1.4.1.6066.2.1.3.1.3.2.1 | current |