MIBs Depot

NTWS-TRAP-MIB

Registered at
1.3.6.1.4.1.45.6.1.4.1
1.3.6.1.4.1.45.6.1.5.0
Last updated
2008-05-15 02:15
Organization
Nortel Networks
Revisions
2008-05-15 02:15, 2008-05-07 02:12, 2008-04-22 02:02, 2008-04-10 02:01, 2008-04-08 01:58, 2008-02-18 01:57, 2007-12-03 01:53, 2007-11-15 01:52, 2007-11-01 01:45, 2007-10-01 01:41, 2007-08-31 01:40, 2007-08-31 01:30, 2007-08-24 01:22, 2007-07-06 01:10, 2007-06-05 01:07, 2007-05-17 01:06, 2007-05-04 01:03, 2007-04-19 01:00, 2007-03-27 00:54, 2007-02-15 00:53, 2007-01-09 00:52, 2007-01-09 00:51, 2007-01-09 00:50, 2006-09-28 00:45, 2006-08-08 00:42, 2006-07-31 00:40, 2006-07-28 00:32, 2006-07-23 00:29, 2006-07-12 00:28, 2006-07-07 00:26, 2006-07-07 00:25, 2006-07-06 00:23, 2006-04-19 00:22, 2006-04-19 00:21, 2005-01-01 00:00
Namespace
nortel
Source file
NTWS-TRAP-MIB
Digest
sha256:9f175b343f6ed6e96d113b220289e87a536fb68306d8b0f792efb605dfcc8d93

Description

Notifications emitted by Nortel Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright 2008 Nortel Networks. All rights reserved. This Nortel Networks SNMP Management Information Base Specification (Specification) embodies Nortel Networks' confidential and proprietary intellectual property. This Specification is supplied 'AS IS' and Nortel Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.

Contact

www.nortelnetworks.com

Imports

FromSymbols
NTWS-AP-TCNtwsAccessType, NtwsApAttachType, NtwsApConnectSecurityType, NtwsApFailDetail, NtwsApFingerprint, NtwsApNum, NtwsApPortOrDapNum, NtwsApSerialNum, NtwsApServiceAvailability, NtwsApTransition, NtwsApWasOperational, NtwsChannelChangeType, NtwsCryptoType, NtwsPowerLevel, NtwsRadioChannelWidth, NtwsRadioConfigState, NtwsRadioMimoState, NtwsRadioMode, NtwsRadioNum, NtwsRadioPowerChangeType, NtwsRadioType
NTWS-CLIENT-SESSION-TCNtwsClientAccessMode, NtwsClientAuthenProtocolType, NtwsClientDot1xState, NtwsClientSessionState, NtwsUserAccessType
NTWS-RF-DETECT-TCNtwsRFDetectClassificationReason
NTWS-ROOT-MIBntwsMibs, ntwsTemporary, ntwsTraps
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

NTWS-AP-TC
NTWS-CLIENT-SESSION-TC
NTWS-RF-DETECT-TC
NTWS-ROOT-MIB
NTWS-TRAP-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
NtwsApMgrChangeReason
TEXTUAL-CONVENTION
Enumeration of the reasons why AP is switching to its secondary link: failover: AP's primary link failed. load-balancing: AP's primary link is overloaded.
current
NtwsAssociationFailureType
TEXTUAL-CONVENTION
Enumeration of the reasons for an AP to fail a client's 802.11 association
current
NtwsAuthenticationFailureType
TEXTUAL-CONVENTION
Enumeration of the reasons for AAA authentication to fail user-glob-mismatch - auth rule/user not found for console login user-does-not-exist - login failed because user not found invalid-password - login failed because of invalid password server-timeout - unable to contact a AAA server signature-failed - incorrect password for mschapv2 local-certificate-error - certificate error all-servers-down - unable to contact any AAA server in the group authentication-type-mismatch - client and switch are using different authentication methods server-rejected - received reject from AAA server fallthru-auth-misconfig - problem with fallthru authentication no-lastresort-auth - problem with last-resort authentication exceeded-max-attempts - local user failed to login within allowed number of attempts resulting in account lockout password-expired - user's password expired
current
NtwsAuthorizationFailureType
TEXTUAL-CONVENTION
Enumeration of the reasons for AAA authorization failure
current
NtwsBlacklistingCause
TEXTUAL-CONVENTION
Enumeration of reasons for blacklisting a transmitter: bl-configured: administrative action (explicitly added to the Black List), bl-associate-pkt-flood: Association request flood detected, bl-re-associate-pkt-flood: Re-association request flood detected, bl-de-associate-pkt-flood: De-association request flood detected. (The leading 'bl-' stands for 'Black-Listed'; reading it as 'Blocked' would also make sense).
current
NtwsClientAuthorizationReason
TEXTUAL-CONVENTION
Enumeration of the reasons for AAA authorization.
current
NtwsClientClearedReason
TEXTUAL-CONVENTION
Enumeration of the reasons for clearing a session: normal: Session was cleared from the switch as the last step in the normal session termination process. backup-failure: The backup switch could not activate a session from a failed MX.
current
NtwsClientIpAddrChangeReason
TEXTUAL-CONVENTION
Describes the reasons for client IP address changes: client-connected: IP address assigned on initial connection; other: IP address changed after initial connection; dhcp-to-static: erroneous condition where client IP address is changed to a static address while the dhcp-restrict option is enabled.
current
NtwsClusterFailureReason
TEXTUAL-CONVENTION
Enumeration of the reasons why the AC goes into cluster failure state: validation-error: Cluster configuration rejected due to validation error.
current
NtwsConfigSaveInitiatorType
TEXTUAL-CONVENTION
Enumeration of the sources that can initiate a configuration save: cli-console: configuration save requested from serial console administrative session. cli-remote: configuration save requested from telnet or ssh administrative session. https: configuration save requested via HTTPS API (WMS or WebView). snmp-set: configuration saved as a result of performing a SNMP SET operation.
current
NtwsDot1xFailureType
TEXTUAL-CONVENTION
Enumeration of the dot1x failure reasons. quiet-period occurs when client is denied access for a period of time after a failed connection attempt administrative-kill means that the session was cleared using the 'clear dot1x client' command bad-rsnie means that client sent an invalid IE timeout is when there are excessive retransmissions max-sessions-exceeded means the maximum allowed wired clients has been exceeded on the switch fourway-hs-failure is for failures occuring the 4-way key handshake user-glob-mismatch means the name received in the dot1x identity request does not match any configured userglobs in the system reauth-disabled means that the client is trying to reauthenticate but reauthentication is disabled gkhs-failure means that either there was no response from the client during the GKHS or the response did not have an IE force-unauth-configured means that the client is trying to connect through a port which is configured as force-unauth cert-not-installed means that there is no certificate installed on the switch
current
NtwsMichaelMICFailureCause
TEXTUAL-CONVENTION
Describes the cause/source of Michael MIC Failure detection.
current
NtwsMobilityDomainResiliencyStatus
TEXTUAL-CONVENTION
Enumeration of the current resilient capacity status for a mobility domain: resilient: Every AP in the mobility domain has a secondary backup link. If the primary switch of an AP failed, the AP and its sessions would fail over to its backup link. degraded: Some APs only have a primary link. If the primary switch of an AP without a backup link failed, the AP would reboot and its sessions would be lost.
current
NtwsRFDetectDoSType
TEXTUAL-CONVENTION
The types of denial of service (DoS) attacks
current
NtwsSessionDisconnectType
TEXTUAL-CONVENTION
Enumeration of the sources that can initiate the termination of a session: admin-disconnect: session terminated by administrative action (from console, telnet session, WebView, or WMS). dyn-auth-disconnect: session terminated by dynamic authorization client; description will have the IP address of the dynamic authorization client which sent the request.
current
NtwsUserAttributeList
TEXTUAL-CONVENTION
Display string listing AAA attributes and their values. These strings can be used, for example, in change of authorization notifications. The syntax is: attribute_name1=value1, attribute_name2=value2, ... where attribute_name can be one of the following: vlan-name, in-acl, out-acl, mobility-prof, time-of-day, end-date, sess-timeout, acct-interval, service-type. Example: vlan-name=red, in-acl=in_acl_1
current

Objects

NameOIDSyntaxAccessStatus
ntwsDeviceId
OBJECT-TYPE
Enumeration of devices as indicated in registration MIB. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.1OBJECT IDENTIFIERaccessible-for-notifycurrent
ntwsMobilityDomainIp
OBJECT-TYPE
IP address of the other switch which the send switch is reporting on. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.2IpAddressaccessible-for-notifycurrent
ntwsAPMACAddress
OBJECT-TYPE
MAC address of the AP of interest. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.3MacAddressaccessible-for-notifycurrent
ntwsClientMACAddress
OBJECT-TYPE
MAC address of the client of interest. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.4MacAddressaccessible-for-notifycurrent
ntwsRFDetectXmtrMacAddr
OBJECT-TYPE
Describes the transmitter's MAC address. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.5MacAddressaccessible-for-notifycurrent
ntwsPortNum
OBJECT-TYPE
Port number on the AC which reported this rogue during a detection sweep. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.6INTEGER (1..22)accessible-for-notifycurrent
ntwsAPRadioNum
OBJECT-TYPE
Radio number of the AP which reported this rogue during a detection sweep. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.7NtwsRadioNumaccessible-for-notifycurrent
ntwsRadioRssi
OBJECT-TYPE
The received signal strength as measured by the AP radio which reported this rogue during a detection sweep. This object is used within notifications and is not accessible. Not used by any notification.
1.3.6.1.4.1.45.6.1.2.8INTEGER (0..1024)accessible-for-notifyobsolete
ntwsRadioBSSID
OBJECT-TYPE
The basic service set identifier of the rogue from the beacon frame reported by the AP during a detection sweep. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.9OCTET STRING (SIZE(6))accessible-for-notifycurrent
ntwsUserName
OBJECT-TYPE
The client user name as learned from the AAA process. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.10DisplayString (SIZE(0..32))accessible-for-notifycurrent
ntwsClientAuthServerIp
OBJECT-TYPE
The client authentication server ip address. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.11IpAddressaccessible-for-notifycurrent
ntwsClientSessionState
OBJECT-TYPE
The state for a client session. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.12NtwsClientSessionStateaccessible-for-notifycurrent
ntwsDAPNum
OBJECT-TYPE
The DAP number on the wireless switch. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.13INTEGER (1..100)accessible-for-notifycurrent
ntwsClientIp
OBJECT-TYPE
The client ip address. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.14IpAddressaccessible-for-notifycurrent
ntwsClientSessionId
OBJECT-TYPE
The unique global id for a client session. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.15DisplayString (SIZE(0..32))accessible-for-notifycurrent
ntwsClientAuthenProtocolType
OBJECT-TYPE
The authentication protocol for a client. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.16NtwsClientAuthenProtocolTypeaccessible-for-notifycurrent
ntwsClientVLANName
OBJECT-TYPE
The vlan name a client is on. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.17DisplayString (SIZE(0..32))accessible-for-notifycurrent
ntwsClientSessionStartTime
OBJECT-TYPE
The start time of a client session, relative to the sysUptime. This object is used within notifications and is not accessible. Obsolete. Do not use it because it's not vital information and often *cannot* be implemented to match the declared semantics: a client session might have been created on another wireless switch, *before* the current switch booted (the local zero of sysUptime).
1.3.6.1.4.1.45.6.1.2.18TimeTicksaccessible-for-notifyobsolete
ntwsClientFailureCause
OBJECT-TYPE
Display string for possible failure cause for a client session. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.19DisplayString (SIZE(0..255))accessible-for-notifycurrent
ntwsClientRoamedFromPortNum
OBJECT-TYPE
The port number on the AC a client has roamed from. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.20INTEGER (1..20)accessible-for-notifycurrent
ntwsClientRoamedFromRadioNum
OBJECT-TYPE
The radio number of the AP the client is roamed from. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.21NtwsRadioNumaccessible-for-notifycurrent
ntwsClientRoamedFromDAPNum
OBJECT-TYPE
The DAP number on the AC which reported this rogue during roam. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.22INTEGER (1..100)accessible-for-notifycurrent
ntwsUserParams
OBJECT-TYPE
A display string of User Parameters for client user authorization attributes learned through AAA and/or used by the system. Note that the syntax will be (name=value, name=value,..) for the parsing purpose. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.23DisplayString (SIZE(0..255))accessible-for-notifycurrent
ntwsClientLocationPolicyIndex
OBJECT-TYPE
Index of the Location Policy rule applied to a user. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.24INTEGER (0..1024)accessible-for-notifycurrent
ntwsClientAssociationFailureCause
OBJECT-TYPE
The client association failure cause. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.25NtwsAssociationFailureTypeaccessible-for-notifycurrent
ntwsClientAuthenticationFailureCause
OBJECT-TYPE
The client authentication failure cause. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.26NtwsAuthenticationFailureTypeaccessible-for-notifycurrent
ntwsClientAuthorizationFailureCause
OBJECT-TYPE
The client authorization failure cause. Note that if it is the user-param, we would additionally expect the failure cause description to list the user attribute value that caused the failure. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.27NtwsAuthorizationFailureTypeaccessible-for-notifycurrent
ntwsClientFailureCauseDescription
OBJECT-TYPE
Display string for describing the client failure cause. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.28DisplayString (SIZE(0..255))accessible-for-notifycurrent
ntwsClientRoamedFromWsIp
OBJECT-TYPE
The system IP address of the AC (wireless switch) a client roamed from. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.29IpAddressaccessible-for-notifycurrent
ntwsClientRoamedFromAccessType
OBJECT-TYPE
The client access type (ap, dap, wired) that a client roamed from. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.30NtwsAccessTypeaccessible-for-notifycurrent
ntwsClientAccessType
OBJECT-TYPE
The client access type (ap, dap, wired). This object is used within notifications and is not accessible. For new traps, use ntwsClientAccessMode instead of this object.
1.3.6.1.4.1.45.6.1.2.31NtwsAccessTypeaccessible-for-notifycurrent
ntwsRadioMACAddress
OBJECT-TYPE
AP Radio MAC address. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.32MacAddressaccessible-for-notifycurrent
ntwsRadioPowerChangeReason
OBJECT-TYPE
The type of event that caused an AP radio power change; occurs due to auto-tune operation. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.33NtwsRadioPowerChangeTypeaccessible-for-notifycurrent
ntwsNewChannelNum
OBJECT-TYPE
New channel number of the AP radio used after an auto tune event. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.34INTEGER (1..1024)accessible-for-notifycurrent
ntwsOldChannelNum
OBJECT-TYPE
Old channel number of the AP radio used before an auto tune event. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.35INTEGER (1..1024)accessible-for-notifycurrent
ntwsChannelChangeReason
OBJECT-TYPE
The type of event that caused an AP radio channel change; occurs due to auto-tune operation. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.36NtwsChannelChangeTypeaccessible-for-notifycurrent
ntwsRFDetectListenerListInfo
OBJECT-TYPE
The RF Detection Listener list info including a list of (listener mac, rssi, channel, ssid, time). There will be a maximum of 6 entries in the list. Formats: MAC: 18 bytes: %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X RSSI: 10 bytes: %10d CHANNEL: 3 bytes: %3d SSID: 32 bytes: %s TIME: 26 bytes: %s Maximum size per entry is 89+4+2 = 95 bytes. Maximum size of the string is 6*95= 571 bytes (include NULL). This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.37OCTET STRING (SIZE(0..571))accessible-for-notifycurrent
ntwsRadioSSID
OBJECT-TYPE
The radio SSID string This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.38DisplayString (SIZE(0..32))accessible-for-notifycurrent
ntwsNewPowerLevel
OBJECT-TYPE
New power level of the AP radio used after an auto tune event. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.39NtwsPowerLevelaccessible-for-notifycurrent
ntwsOldPowerLevel
OBJECT-TYPE
Old power level of the AP radio used before an auto tune event. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.40NtwsPowerLevelaccessible-for-notifycurrent
ntwsRadioPowerChangeDescription
OBJECT-TYPE
The radio power change description. In the case of reason being dup-pkts-threshold-exceed(1), and retransmit-threshold-exceed(2), clientMacAddress will be included in the description. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.41DisplayString (SIZE(0..255))accessible-for-notifycurrent
ntwsCounterMeasurePerformerListInfo
OBJECT-TYPE
A list of information for APs performing Counter Measures including a list of performer mac addresses. This object is used within notifications and is not accessible. Not used by any notification.
1.3.6.1.4.1.45.6.1.2.42DisplayString (SIZE(0..255))accessible-for-notifyobsolete
ntwsClientDot1xState
OBJECT-TYPE
The state for a client 802.1X. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.43NtwsClientDot1xStateaccessible-for-notifycurrent
ntwsClientDot1xFailureCause
OBJECT-TYPE
The client 802.1X failure cause. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.44NtwsDot1xFailureTypeaccessible-for-notifycurrent
ntwsAPAccessType
OBJECT-TYPE
The access point access type (ap, dap,). This object is used within notifications and is not accessible. Not used by any notification.
1.3.6.1.4.1.45.6.1.2.45NtwsAccessTypeaccessible-for-notifyobsolete
ntwsUserAccessType
OBJECT-TYPE
The user access type (MAC, WEB, DOT1X, LAST-RESORT). This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.46NtwsUserAccessTypeaccessible-for-notifycurrent
ntwsClientSessionElapsedTime
OBJECT-TYPE
The elapsed time for a client session. Obsoleted because session time is usually reported in seconds. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.47TimeTicksaccessible-for-notifyobsolete
ntwsLocalId
OBJECT-TYPE
Local Id for the session. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.48INTEGER (1..65000)accessible-for-notifycurrent
ntwsRFDetectDoSType
OBJECT-TYPE
The type of denial of service (DoS) attack. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.49NtwsRFDetectDoSTypeaccessible-for-notifycurrent
ntwsSourceWsIp
OBJECT-TYPE
IP address of another AC (wireless switch). This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.50IpAddressaccessible-for-notifycurrent
ntwsClientVLANid
OBJECT-TYPE
VLAN ID used by client traffic. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.51INTEGER (0..4095)accessible-for-notifycurrent
ntwsClientVLANtag
OBJECT-TYPE
VLAN tag used by client traffic. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.52INTEGER (0..4095)accessible-for-notifycurrent
ntwsDeviceModel
OBJECT-TYPE
The model of a device in printable US-ASCII. If unknown (or not available), then the value is a zero length string. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.53DisplayStringaccessible-for-notifycurrent
ntwsDeviceSerNum
OBJECT-TYPE
The serial number of an AP in printable US-ASCII. If unknown (or not available), then the value is a zero length string. Should NOT be used to identify other devices, for example an AC (wireless switch). This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.54NtwsApSerialNumaccessible-for-notifycurrent
ntwsRsaPubKeyFingerPrint
OBJECT-TYPE
The hash of the RSA public key (of a key pair) in binary form that uniquely identifies the public key of an AP. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.55NtwsApFingerprintaccessible-for-notifycurrent
ntwsDAPconnectWarningType
OBJECT-TYPE
The type of DAP connect warning. The values are: not-configured-fingerprint-connect(1)...a DAP, which has an RSA keypair but did not have its fingerprint configured on the AC, has connected to the AC when 'dap security' set to 'OPTIONAL' secure-handshake-failure(2).............a DAP tried to connect to the AC with security, but the handshake failed not-configured-fingerprint-required(3)..a DAP tried to connect to the AC with security, but 'dap security' set to 'REQUIRED', and no fingerprint was configured for the DAP fingerprint-mismatch(4).................a DAP tried to connect to the AC with security and its fingerprint was configured, but the fingerprint did not match the computed one This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.56INTEGER {not-configured-fingerprint-connect(1), secure-handshake-failure(2), not-configured-fingerprint-required(3), fingerprint-mismatch(4)}accessible-for-notifycurrent
ntwsClientMACAddress2
OBJECT-TYPE
MAC address of the second client of interest. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.57MacAddressaccessible-for-notifycurrent
ntwsApAttachType
OBJECT-TYPE
How the AP is attached to the AC (directly or via L2/L3 network). This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.58NtwsApAttachTypeaccessible-for-notifycurrent
ntwsApPortOrDapNum
OBJECT-TYPE
The Port Number if the AP is directly attached, or the CLI-assigned DAP Number if attached via L2/L3 network. This object is used within notifications and is not accessible. Obsoleted by ntwsApNum. (In 6.0, direct- and network-attached APs were unified.)
1.3.6.1.4.1.45.6.1.2.59NtwsApPortOrDapNumaccessible-for-notifyobsolete
ntwsApName
OBJECT-TYPE
The name of the AP, as assigned in AC's CLI; defaults to AP<Number> (examples: 'AP01', 'AP22', 'AP333', 'AP4444'); could have been changed from CLI to a meaningful name, for example the location of the AP (example: 'MeetingRoom73'). This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.60DisplayStringaccessible-for-notifycurrent
ntwsApTransition
OBJECT-TYPE
AP state Transition, as seen by the AC. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.61NtwsApTransitionaccessible-for-notifycurrent
ntwsApFailDetail
OBJECT-TYPE
Detailed failure code for some of the transitions specified in 'ntwsApTransition' object. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.62NtwsApFailDetailaccessible-for-notifycurrent
ntwsRadioType
OBJECT-TYPE
Indicates the AP Radio Type, as seen by AC. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.63NtwsRadioTypeaccessible-for-notifycurrent
ntwsRadioConfigState
OBJECT-TYPE
Indicates the Radio State, as seen by the AC. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.64NtwsRadioConfigStateaccessible-for-notifycurrent
ntwsApConnectSecurityType
OBJECT-TYPE
Indicates the security level of the connection between AP and AC. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.65NtwsApConnectSecurityTypeaccessible-for-notifycurrent
ntwsApServiceAvailability
OBJECT-TYPE
Indicates the level of wireless service availability. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.66NtwsApServiceAvailabilityaccessible-for-notifycurrent
ntwsApWasOperational
OBJECT-TYPE
Indicates whether the AP was operational before a transition occured. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.67NtwsApWasOperationalaccessible-for-notifycurrent
ntwsClientTimeSinceLastRoam
OBJECT-TYPE
The time in seconds since the most recent roam of a given client. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.68Unsigned32accessible-for-notifycurrent
ntwsClientIpAddrChangeReason
OBJECT-TYPE
Indicates the reason why client IP address changed. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.69NtwsClientIpAddrChangeReasonaccessible-for-notifycurrent
ntwsRFDetectRogueAPMacAddr
OBJECT-TYPE
Describes the MAC address of the Rogue AP the transmitter is connected to. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.70MacAddressaccessible-for-notifycurrent
ntwsBlacklistingRemainingTime
OBJECT-TYPE
The time in seconds remaining until a given transmitter could be removed from the Black List. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.71Unsigned32accessible-for-notifycurrent
ntwsBlacklistingCause
OBJECT-TYPE
Indicates the reason why a given transmitter is blacklisted. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.72NtwsBlacklistingCauseaccessible-for-notifycurrent
ntwsNumLicensedActiveAPs
OBJECT-TYPE
Indicates the maximum (licensed) number of active APs for this AC. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.73Unsigned32accessible-for-notifycurrent
ntwsClientDynAuthorClientIp
OBJECT-TYPE
The dynamic authorization client IP address which caused the change of authorization. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.74IpAddressaccessible-for-notifycurrent
ntwsChangedUserParamOldValues
OBJECT-TYPE
A display string listing the changed AAA attributes and their values, before the change of authorization was executed. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.75NtwsUserAttributeListaccessible-for-notifycurrent
ntwsChangedUserParamNewValues
OBJECT-TYPE
A display string listing the changed AAA attributes and their values, after the change of authorization was executed. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.76NtwsUserAttributeListaccessible-for-notifycurrent
ntwsClientDisconnectSource
OBJECT-TYPE
The external source that initiated the termination of a session. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.77NtwsSessionDisconnectTypeaccessible-for-notifycurrent
ntwsClientDisconnectDescription
OBJECT-TYPE
Display string for providing available information related to the external source that initiated a session termination. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.78DisplayString (SIZE(0..255))accessible-for-notifycurrent
ntwsMobilityDomainSecondarySeedIp
OBJECT-TYPE
The secondary seed IP address to which the Mobility Domain has failed over. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.79IpAddressaccessible-for-notifycurrent
ntwsMobilityDomainPrimarySeedIp
OBJECT-TYPE
The primary seed IP address to which the Mobility Domain has failed back. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.80IpAddressaccessible-for-notifycurrent
ntwsRFDetectClassificationReason
OBJECT-TYPE
Indicates the reason why a RF device is classified the way it is. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.81NtwsRFDetectClassificationReasonaccessible-for-notifycurrent
ntwsConfigSaveFileName
OBJECT-TYPE
Display string listing the name of the file to which the running configuration was saved. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.82DisplayString (SIZE(0..255))accessible-for-notifycurrent
ntwsConfigSaveInitiatorType
OBJECT-TYPE
Indicates the source that initiated a configuration save. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.83NtwsConfigSaveInitiatorTypeaccessible-for-notifycurrent
ntwsConfigSaveInitiatorIp
OBJECT-TYPE
The IP address of the source that initiated a configuration save. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.84IpAddressaccessible-for-notifycurrent
ntwsConfigSaveInitiatorDetails
OBJECT-TYPE
Display string listing additional information regarding the source that initiated a configuration save, when available. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.85DisplayString (SIZE(0..255))accessible-for-notifycurrent
ntwsConfigSaveGeneration
OBJECT-TYPE
Indicates the number of configuration changes since the last system boot. The generation count is used to track the number of times the running configuration has been changed due to administrative actions (set/clear), SNMP requests (SET), XML requests (e.g. WMS). This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.86Counter32accessible-for-notifycurrent
ntwsApNum
OBJECT-TYPE
The administratively assigned AP Number, unique on same AC (switch), regardless of how APs are attached to the AC. This object is used within notifications and is not accessible. Obsoletes ntwsApPortOrDapNum. For clarity, use this object to identify an AP since in 6.0 directly attached APs and DAPs were unified.
1.3.6.1.4.1.45.6.1.2.87NtwsApNumaccessible-for-notifycurrent
ntwsRadioMode
OBJECT-TYPE
Indicates the administratively controlled Radio Mode (enabled/disabled/sentry). This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.88NtwsRadioModeaccessible-for-notifycurrent
ntwsMichaelMICFailureCause
OBJECT-TYPE
Indicates the Michael MIC Failure cause / who detected it. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.89NtwsMichaelMICFailureCauseaccessible-for-notifycurrent
ntwsClientAccessMode
OBJECT-TYPE
The client access mode (ap, wired). This object is used within notifications and is not accessible. Intended to replace ntwsClientAccessType. (In 6.0, direct- and network-attached APs were unified.)
1.3.6.1.4.1.45.6.1.2.90NtwsClientAccessModeaccessible-for-notifycurrent
ntwsClientAuthorizationReason
OBJECT-TYPE
Indicates the reason why client performed AAA authorization. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.91NtwsClientAuthorizationReasonaccessible-for-notifycurrent
ntwsPhysPortNum
OBJECT-TYPE
Physical Port Number on the AC. Zero means the port is unknown or not applicable (for example, when ntwsClientAccessMode = 'ap'). This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.92Unsigned32 (0..1024)accessible-for-notifycurrent
ntwsApMgrOldIp
OBJECT-TYPE
The IP address of the AP's former primary manager switch. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.93IpAddressaccessible-for-notifycurrent
ntwsApMgrNewIp
OBJECT-TYPE
The IP address of the AP's new primary manager switch. This address was formerly the AP's secondary backup link. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.94IpAddressaccessible-for-notifycurrent
ntwsApMgrChangeReason
OBJECT-TYPE
Indicates the reason why the AP's primary manager changed. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.95NtwsApMgrChangeReasonaccessible-for-notifycurrent
ntwsClientClearedReason
OBJECT-TYPE
Indicates the reason why client was cleared. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.96NtwsClientClearedReasonaccessible-for-notifycurrent
ntwsMobilityDomainResiliencyStatus
OBJECT-TYPE
Indicates the current resilient capacity status for a mobility domain. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.97NtwsMobilityDomainResiliencyStatusaccessible-for-notifycurrent
ntwsClientSessionElapsedSeconds
OBJECT-TYPE
Indicates the time in seconds elapsed since the start of the Client Session. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.98Unsigned32accessible-for-notifycurrent
ntwsRadioChannelWidth
OBJECT-TYPE
Indicates the administratively controlled Channel Width (20MHz/40MHz). This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.99NtwsRadioChannelWidthaccessible-for-notifycurrent
ntwsRadioMimoState
OBJECT-TYPE
Indicates the Radio MIMO State, as seen by the AC (1x1/2x3/3x3). This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.100NtwsRadioMimoStateaccessible-for-notifycurrent
ntwsClientRadioType
OBJECT-TYPE
Indicates the Client Radio Type, as detected by an attached AP and reported to the AC. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.101NtwsRadioTypeaccessible-for-notifycurrent
ntwsRFDetectXmtrRadioType
OBJECT-TYPE
Indicates the Radio Type of the Transmitter, as detected by an attached AP and reported to the AC. The Transmitter may be a wireless client or an AP. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.102NtwsRadioTypeaccessible-for-notifycurrent
ntwsRFDetectXmtrCryptoType
OBJECT-TYPE
Indicates the Crypto Type used by the Transmitter, as detected by an attached AP and reported to the AC. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.103NtwsCryptoTypeaccessible-for-notifycurrent
ntwsClusterFailureReason
OBJECT-TYPE
Indicates the reason why cluster configuration failed to apply. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.104NtwsClusterFailureReasonaccessible-for-notifycurrent
ntwsClusterFailureDescription
OBJECT-TYPE
Display string for describing the cluster configuration failure cause. This object is used within notifications and is not accessible.
1.3.6.1.4.1.45.6.1.2.105DisplayString (SIZE(0..255))accessible-for-notifycurrent
ntwsTrapsV2
OBJECT-IDENTITY
1.3.6.1.4.1.45.6.1.5.0

Notifications

NameOIDStatus
ntwsDeviceFailTrap
NOTIFICATION-TYPE
The device has a failure indication
1.3.6.1.4.1.45.6.1.5.0.1current
ntwsDeviceOkayTrap
NOTIFICATION-TYPE
The device has recovered
1.3.6.1.4.1.45.6.1.5.0.2current
ntwsPoEFailTrap
NOTIFICATION-TYPE
PoE has failed on the indicated port
1.3.6.1.4.1.45.6.1.5.0.3current
ntwsApTimeoutTrap
NOTIFICATION-TYPE
The AP entering the AC at port ntwsPortNum with MAC ntwsRadioMacAddress and of the access type (ap or dap) has not responded. Replaced by ntwsApNonOperStatusTrap2, with ntwsApTransition = 'timeout'.
1.3.6.1.4.1.45.6.1.5.0.4obsolete
ntwsAPBootTrap
NOTIFICATION-TYPE
The AP entering the AC at port ntwsPortNum with MAC ntwsRadioMacAddress and of the access type (ap or dap) has booted. Replaced by ntwsApNonOperStatusTrap2, with ntwsApTransition = 'bootSuccess'.
1.3.6.1.4.1.45.6.1.5.0.5obsolete
ntwsMobilityDomainJoinTrap
NOTIFICATION-TYPE
The mobility domain member has received an UP notice from the remote address.
1.3.6.1.4.1.45.6.1.5.0.6current
ntwsMobilityDomainTimeoutTrap
NOTIFICATION-TYPE
The mobility domain member has declared the remote address to be DOWN.
1.3.6.1.4.1.45.6.1.5.0.7current
ntwsMpMichaelMICFailure
NOTIFICATION-TYPE
Two Michael MIC failures were seen within 60 seconds of each other. Obsoleted by ntwsMichaelMICFailure.
1.3.6.1.4.1.45.6.1.5.0.8obsolete
ntwsRFDetectRogueAPTrap
NOTIFICATION-TYPE
This trap is sent when RF detection finds a rogue AP. XmtrMacAddr is the radio MAC address from the beacon. ListenerListInfo is a display string of a list of listener information. Obsoleted by ntwsRFDetectRogueDeviceTrap2.
1.3.6.1.4.1.45.6.1.5.0.9obsolete
ntwsRFDetectAdhocUserTrap
NOTIFICATION-TYPE
This trap is sent when RF detection sweep finds a ad-hoc user. ntwsRFDetectXmtrMacAddr is the MAC address of the ad-hoc user. ntwsRFDetectListenerListInfo is a display string of a list of listener information.
1.3.6.1.4.1.45.6.1.5.0.10current
ntwsRFDetectRogueDisappearTrap
NOTIFICATION-TYPE
This trap is sent when a rogue has disappeared. Obsoleted by ntwsRFDetectRogueDeviceDisappearTrap.
1.3.6.1.4.1.45.6.1.5.0.11obsolete
ntwsClientAuthenticationFailureTrap
NOTIFICATION-TYPE
This trap is sent if a client authentication fails.
1.3.6.1.4.1.45.6.1.5.0.12current
ntwsClientAuthorizationFailureTrap
NOTIFICATION-TYPE
This trap is sent if a client authorization fails.
1.3.6.1.4.1.45.6.1.5.0.13current
ntwsClientAssociationFailureTrap
NOTIFICATION-TYPE
This trap is sent if a client association fails.
1.3.6.1.4.1.45.6.1.5.0.14current
ntwsClientAuthorizationSuccessTrap
NOTIFICATION-TYPE
This trap is sent when a client authorizes. Obsoleted by ntwsClientAuthorizationSuccessTrap4.
1.3.6.1.4.1.45.6.1.5.0.15obsolete
ntwsClientDeAssociationTrap
NOTIFICATION-TYPE
This trap is sent if a client de-association occurred.
1.3.6.1.4.1.45.6.1.5.0.16current
ntwsClientRoamingTrap
NOTIFICATION-TYPE
This trap is sent if a client roams from one location to another.
1.3.6.1.4.1.45.6.1.5.0.17current
ntwsAutoTuneRadioPowerChangeTrap
NOTIFICATION-TYPE
This trap is sent if a radio's power level has changed based on auto-tune.
1.3.6.1.4.1.45.6.1.5.0.18current
ntwsAutoTuneRadioChannelChangeTrap
NOTIFICATION-TYPE
This trap is sent if a radio's channel has changed based on auto-tune.
1.3.6.1.4.1.45.6.1.5.0.19current
ntwsCounterMeasureStartTrap
NOTIFICATION-TYPE
This trap is sent when counter measures are started against a rogue. ntwsRFDetectXmtrMacAddr is the mac address of the rogue we are doing counter measures against. ntwsRadioMACAddress identifies the radio performing the countermeasures.
1.3.6.1.4.1.45.6.1.5.0.20current
ntwsCounterMeasureStopTrap
NOTIFICATION-TYPE
This trap is sent when counter measures are stopped against a rogue. ntwsRFDetectXmtrMacAddr is the mac address of the rogue we were doing counter measures against. ntwsRadioMACAddress identifies the radio performing the countermeasures.
1.3.6.1.4.1.45.6.1.5.0.21current
ntwsClientDot1xFailureTrap
NOTIFICATION-TYPE
This trap is sent if a client failed 802.1X.
1.3.6.1.4.1.45.6.1.5.0.22current
ntwsClientClearedTrap
NOTIFICATION-TYPE
This trap is sent when a client session is cleared. Obsoleted by ntwsClientClearedTrap2.
1.3.6.1.4.1.45.6.1.5.0.23obsolete
ntwsClientAuthorizationSuccessTrap2
NOTIFICATION-TYPE
This trap is sent when a client authorizes. Obsoleted by ntwsClientAuthorizationSuccessTrap4.
1.3.6.1.4.1.45.6.1.5.0.24obsolete
ntwsRFDetectSpoofedMacAPTrap
NOTIFICATION-TYPE
This trap is sent when RF detection finds an AP using the MAC of the listener. ntwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. ntwsRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by ntwsRFDetectDoSTrap and ntwsRFDetectRogueDeviceTrap2. One of the two traps will be sent depending on the type of AP MAC spoofing detected.
1.3.6.1.4.1.45.6.1.5.0.25obsolete
ntwsRFDetectSpoofedSsidAPTrap
NOTIFICATION-TYPE
This trap is sent when RF detection finds an AP using the SSID of the listener, and the AP is not in the mobility domain. ntwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. ntwsRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by ntwsRFDetectRogueDeviceTrap2 and ntwsRFDetectSuspectDeviceTrap2. One of the two traps will be sent, depending on RF detection classification rules.
1.3.6.1.4.1.45.6.1.5.0.26obsolete
ntwsRFDetectDoSTrap
NOTIFICATION-TYPE
This trap is sent when RF detection finds a denial of service (DoS) occurring. ntwsRFDetectDoSType specifies the type of DoS. ntwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. ntwsRFDetectListenerListInfo is a display string of a list of listener information.
1.3.6.1.4.1.45.6.1.5.0.27current
ntwsRFDetectClientViaRogueWiredAPTrap
NOTIFICATION-TYPE
This trap is sent when a client is detected that connected via a rogue AP that is attached to a wired port. ntwsSourceWsIp is the IP address of the AC (switch) with the wired port. ntwsPortNum is the port on the AC. ntwsClientVLANid is the VLAN ID of the client's traffic. ntwsClientVLANtag is the VLAN tag of the client's traffic. ntwsRFDetectXmtrMacAddr is the MAC address of the client. ntwsRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by ntwsRFDetectClientViaRogueWiredAPTrap3.
1.3.6.1.4.1.45.6.1.5.0.28obsolete
ntwsRFDetectInterferingRogueAPTrap
NOTIFICATION-TYPE
This trap is sent when RF detection finds an interfering rogue AP. ntwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. ntwsRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by ntwsRFDetectSuspectDeviceTrap2.
1.3.6.1.4.1.45.6.1.5.0.29obsolete
ntwsRFDetectInterferingRogueDisappearTrap
NOTIFICATION-TYPE
This trap is sent when an interfering rogue has disappeared. ntwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. Obsoleted by ntwsRFDetectSuspectDeviceDisappearTrap.
1.3.6.1.4.1.45.6.1.5.0.30obsolete
ntwsRFDetectUnAuthorizedSsidTrap
NOTIFICATION-TYPE
This trap is sent when RF detection finds use of an unauthorized SSID. ntwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. ntwsRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by ntwsRFDetectRogueDeviceTrap2 and ntwsRFDetectSuspectDeviceTrap2. One of the two traps will be sent if the device having an unauthorized SSID is classified as rogue or suspect because of this.
1.3.6.1.4.1.45.6.1.5.0.31obsolete
ntwsRFDetectUnAuthorizedOuiTrap
NOTIFICATION-TYPE
This trap is sent when RF detection finds use of an unauthorized OUI. ntwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. ntwsRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by ntwsRFDetectRogueDeviceTrap2 and ntwsRFDetectSuspectDeviceTrap2. One of the two traps will be sent if the device having an unauthorized OUI is classified as rogue or suspect because of this.
1.3.6.1.4.1.45.6.1.5.0.32obsolete
ntwsRFDetectUnAuthorizedAPTrap
NOTIFICATION-TYPE
This trap is sent when RF detection finds operation of an unauthorized AP. ntwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. ntwsRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by ntwsRFDetectRogueDeviceTrap2.
1.3.6.1.4.1.45.6.1.5.0.33obsolete
ntwsDAPConnectWarningTrap
NOTIFICATION-TYPE
A DAP, tried to connect to the AC. ntwsDeviceModel provides the model of the DAP. ntwsDeviceSerNum provides the serial number of the DAP. ntwsRsaPubKeyFingerPrint provides the computed fingerprint of the DAP. ntwsDAPconnectWarningType provides the type of connect warning. Replaced by ntwsApNonOperStatusTrap2, with ntwsApTransition = 'connectFail'.
1.3.6.1.4.1.45.6.1.5.0.34obsolete
ntwsRFDetectDoSPortTrap
NOTIFICATION-TYPE
This trap is sent when RF detection finds a denial of service (DoS) occurring. This has port and AP info instead of 'Listener info'. ntwsRFDetectDoSType specifies the type of DoS. ntwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. ntwsClientAccessType specifies whether wired, AP, or DAP. ntwsPortNum (for wired or AP), the port that is used. ntwsDAPNum (for a DAP), the ID of the DAP.
1.3.6.1.4.1.45.6.1.5.0.35current
ntwsMpMichaelMICFailure2
NOTIFICATION-TYPE
Two Michael MIC failures were seen within 60 seconds of each other. Object ntwsClientMACAddress is the source of the first failure, and object ntwsClientMACAddress2 source of the second failure. Obsoleted by ntwsMichaelMICFailure.
1.3.6.1.4.1.45.6.1.5.0.36obsolete
ntwsApNonOperStatusTrap
NOTIFICATION-TYPE
This trap is sent when the AP changes state and the new one is a non-operational state. Obsoleted by ntwsApNonOperStatusTrap2.
1.3.6.1.4.1.45.6.1.5.0.37obsolete
ntwsApOperRadioStatusTrap
NOTIFICATION-TYPE
This trap is sent when the Radio changes state. It also contains aggregate information about the AP in operational state - security level and service availability. Obsoleted by ntwsApOperRadioStatusTrap3.
1.3.6.1.4.1.45.6.1.5.0.38obsolete
ntwsClientIpAddrChangeTrap
NOTIFICATION-TYPE
This trap is sent when a client's IP address changes. The most likely case for this is when the client first connects to the network.
1.3.6.1.4.1.45.6.1.5.0.39current
ntwsClientAssociationSuccessTrap
NOTIFICATION-TYPE
This trap is sent if a client association succeeds. WARNING: DO NOT enable it in normal use. It may impair switch performance! Only recommended for debugging network issues.
1.3.6.1.4.1.45.6.1.5.0.40current
ntwsClientAuthenticationSuccessTrap
NOTIFICATION-TYPE
This trap is sent if a client authentication succeeds.
1.3.6.1.4.1.45.6.1.5.0.41current
ntwsClientDeAuthenticationTrap
NOTIFICATION-TYPE
This trap is sent if a client de-authentication occured.
1.3.6.1.4.1.45.6.1.5.0.42current
ntwsRFDetectBlacklistedTrap
NOTIFICATION-TYPE
This trap is sent if an association, re-association or de-association request (packet) is detected from a blacklisted transmitter (identified by MAC: 'ntwsRFDetectXmtrMacAddr'). If 'ntwsBlacklistingCause' is 'configured', then 'ntwsBlacklistingRemainingTime' will be zero, meaning indefinite time (depending on administrative actions on the Black List). Otherwise, 'ntwsBlacklistingRemainingTime' will indicate the time in seconds until this transmitter's requests could be allowed.
1.3.6.1.4.1.45.6.1.5.0.43current
ntwsRFDetectClientViaRogueWiredAPTrap2
NOTIFICATION-TYPE
This trap is sent when a client is detected that connected via a rogue AP that is attached to a wired port. ntwsSourceWsIp is the IP address of the AC (switch) with the wired port. ntwsPortNum is the port on the AC. ntwsClientVLANid is the VLAN ID of the client's traffic. ntwsClientVLANtag is the VLAN tag of the client's traffic. ntwsRFDetectXmtrMacAddr is the MAC address of the client. ntwsRFDetectListenerListInfo is a display string of a list of listener information. ntwsRFDetectRogueAPMacAddr is the MAC address of the Rogue AP (wired) the client is connected to. Obsoleted by ntwsRFDetectClientViaRogueWiredAPTrap3.
1.3.6.1.4.1.45.6.1.5.0.44obsolete
ntwsRFDetectAdhocUserDisappearTrap
NOTIFICATION-TYPE
This trap is sent when RF detection sweep finds that an ad-hoc user disappeared. ntwsRFDetectXmtrMacAddr is the MAC address of the ad-hoc user.
1.3.6.1.4.1.45.6.1.5.0.45current
ntwsApRejectLicenseExceededTrap
NOTIFICATION-TYPE
This trap is sent when an AC (wireless switch) receives a packet from an inactive AP and attaching that AP would make the AC exceed the maximum (licensed) number of active APs.
1.3.6.1.4.1.45.6.1.5.0.46current
ntwsClientDynAuthorChangeSuccessTrap
NOTIFICATION-TYPE
This trap is sent when the authorization attributes for a user are dynamically changed by an authorized dynamic authorization client.
1.3.6.1.4.1.45.6.1.5.0.47current
ntwsClientDynAuthorChangeFailureTrap
NOTIFICATION-TYPE
This trap is sent if a change of authorization request sent by an authorized dynamic authorization client is unsuccessful.
1.3.6.1.4.1.45.6.1.5.0.48current
ntwsClientDisconnectTrap
NOTIFICATION-TYPE
This trap is sent when a client session is terminated administratively.
1.3.6.1.4.1.45.6.1.5.0.49current
ntwsMobilityDomainFailOverTrap
NOTIFICATION-TYPE
This trap is sent when the Mobility Domain fails over to the secondary seed.
1.3.6.1.4.1.45.6.1.5.0.50current
ntwsMobilityDomainFailBackTrap
NOTIFICATION-TYPE
This trap is sent when the Mobility Domain fails back to the primary seed.
1.3.6.1.4.1.45.6.1.5.0.51current
ntwsRFDetectRogueDeviceTrap
NOTIFICATION-TYPE
This trap is sent when RF detection finds a rogue device. XmtrMacAddr is the radio MAC address from the beacon. ListenerListInfo is a display string of a list of listener information. ClassificationReason indicates the reason why the device is classified as rogue. Obsoleted by ntwsRFDetectRogueDeviceTrap2.
1.3.6.1.4.1.45.6.1.5.0.52obsolete
ntwsRFDetectRogueDeviceDisappearTrap
NOTIFICATION-TYPE
This trap is sent when a rogue device has disappeared. This trap obsoletes the ntwsRFDetectRogueDisappearTrap.
1.3.6.1.4.1.45.6.1.5.0.53current
ntwsRFDetectSuspectDeviceTrap
NOTIFICATION-TYPE
This trap is sent when RF detection finds a suspect device. ntwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. ntwsRFDetectListenerListInfo is a display string of a list of listener information. ClassificationReason indicates the reason why the device is classified as suspect. Obsoleted by ntwsRFDetectSuspectDeviceTrap2.
1.3.6.1.4.1.45.6.1.5.0.54obsolete
ntwsRFDetectSuspectDeviceDisappearTrap
NOTIFICATION-TYPE
This trap is sent when a suspect device has disappeared. ntwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. This trap obsoletes the ntwsRFDetectInterferingRogueDisappearTrap.
1.3.6.1.4.1.45.6.1.5.0.55current
ntwsRFDetectClientViaRogueWiredAPTrap3
NOTIFICATION-TYPE
This trap is sent when a client is detected that connected via a rogue AP that is attached to a wired port. ntwsSourceWsIp is the IP address of the AC (switch) with the wired port. ntwsPortNum is the port on the AC. ntwsClientVLANid is the VLAN ID of the client's traffic. ntwsClientVLANtag is the VLAN tag of the client's traffic. ntwsRFDetectXmtrMacAddr is the MAC address of the client. ntwsRFDetectListenerListInfo is a display string of a list of listener information. ntwsRFDetectRogueAPMacAddr is the MAC address of the Rogue AP (wired) the client is connected to. ClassificationReason indicates the reason why the AP is classified as rogue. This trap obsoletes the ntwsRFDetectClientViaRogueWiredAPTrap and ntwsRFDetectClientViaRogueWiredAPTrap2.
1.3.6.1.4.1.45.6.1.5.0.56current
ntwsRFDetectClassificationChangeTrap
NOTIFICATION-TYPE
This trap is sent when RF detection classification rules change.
1.3.6.1.4.1.45.6.1.5.0.57current
ntwsConfigurationSavedTrap
NOTIFICATION-TYPE
This trap is sent when the running configuration of the switch is written to a configuration file.
1.3.6.1.4.1.45.6.1.5.0.58current
ntwsApNonOperStatusTrap2
NOTIFICATION-TYPE
This trap is sent when the AP changes state and the new one is a non-operational state. Obsoletes ntwsApNonOperStatusTrap.
1.3.6.1.4.1.45.6.1.5.0.59current
ntwsApOperRadioStatusTrap2
NOTIFICATION-TYPE
This trap is sent when the Radio changes state. It also contains aggregate information about the AP in operational state - security level and service availability. Obsoleted by ntwsApOperRadioStatusTrap3.
1.3.6.1.4.1.45.6.1.5.0.60obsolete
ntwsMichaelMICFailure
NOTIFICATION-TYPE
Two Michael MIC failures were seen within 60 seconds of each other. Object ntwsClientMACAddress indicates the source of the first failure, and object ntwsClientMACAddress2 indicates the source of the second failure. Service is interrupted for 60 seconds on the radio due to TKIP countermeasures having commenced. The radio is identified by ntwsApNum and ntwsAPRadioNum. An alternative way to identify the radio is ntwsRadioMACAddress. Obsoletes ntwsMpMichaelMICFailure and ntwsMpMichaelMICFailure2.
1.3.6.1.4.1.45.6.1.5.0.61current
ntwsClientAuthorizationSuccessTrap3
NOTIFICATION-TYPE
This trap is sent when a client authorizes. If ntwsClientAccessMode = 'ap': ntwsApNum, ntwsAPRadioNum, ntwsRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent. If ntwsClientAccessMode = 'wired': ntwsPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoleted by ntwsClientAuthorizationSuccessTrap4.
1.3.6.1.4.1.45.6.1.5.0.62obsolete
ntwsApManagerChangeTrap
NOTIFICATION-TYPE
This trap is sent when the AP's secondary link becomes its primary link.
1.3.6.1.4.1.45.6.1.5.0.63current
ntwsClientClearedTrap2
NOTIFICATION-TYPE
This trap is sent when a client session is cleared. Obsoletes ntwsClientClearedTrap.
1.3.6.1.4.1.45.6.1.5.0.64current
ntwsMobilityDomainResiliencyStatusTrap
NOTIFICATION-TYPE
This trap is sent by a mobility domain seed to announce changes in resilient capacity status.
1.3.6.1.4.1.45.6.1.5.0.65current
ntwsApOperRadioStatusTrap3
NOTIFICATION-TYPE
This trap is sent when the Radio changes state. It also contains aggregate information about the AP in operational state - security level and service availability. Obsoletes ntwsApOperRadioStatusTrap and ntwsApOperRadioStatusTrap2.
1.3.6.1.4.1.45.6.1.5.0.66current
ntwsClientAuthorizationSuccessTrap4
NOTIFICATION-TYPE
This trap is sent when a client authorizes. If ntwsClientAccessMode = 'ap': ntwsApNum, ntwsAPRadioNum, ntwsRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; ntwsClientRadioType gives the type of radio used by this client. If ntwsClientAccessMode = 'wired': ntwsPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes ntwsClientAuthorizationSuccessTrap, ntwsClientAuthorizationSuccessTrap2, ntwsClientAuthorizationSuccessTrap3.
1.3.6.1.4.1.45.6.1.5.0.67current
ntwsRFDetectRogueDeviceTrap2
NOTIFICATION-TYPE
This trap is sent when RF detection finds a rogue device. ntwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. ntwsRFDetectXmtrRadioType indicates the Type of Radio used by the transmitter (rogue device). ntwsRFDetectXmtrCryptoType indicates the Type of Crypto used by the transmitter (rogue device). ntwsRFDetectListenerListInfo is a display string of a list of listener information. ntwsRFDetectClassificationReason indicates the reason why the device is classified as rogue. Obsoletes ntwsRFDetectRogueAPTrap, ntwsRFDetectUnAuthorizedAPTrap, ntwsRFDetectRogueDeviceTrap.
1.3.6.1.4.1.45.6.1.5.0.68current
ntwsRFDetectSuspectDeviceTrap2
NOTIFICATION-TYPE
This trap is sent when RF detection finds a suspect device. ntwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. ntwsRFDetectXmtrRadioType indicates the Type of Radio used by the transmitter (suspect device). ntwsRFDetectXmtrCryptoType indicates the Type of Crypto used by the transmitter (suspect device). ntwsRFDetectListenerListInfo is a display string of a list of listener information. ntwsRFDetectClassificationReason indicates the reason why the device is classified as suspect. Obsoletes ntwsRFDetectInterferingRogueAPTrap, ntwsRFDetectSuspectDeviceTrap.
1.3.6.1.4.1.45.6.1.5.0.69current
ntwsClusterFailureTrap
NOTIFICATION-TYPE
This trap is sent when the cluster configuration failed to apply. If ntwsClusterFailureReason = 'validation-error': The validation error is reported by the receiving end of the configuration updates. The receiving end can be any AC (switch) in the mobility domain: member, secondary seed or primary seed. - Primary seed will be the receiving end of configuration updates when Primary seed is joining the cluster and Secondary seed has preempt mode enabled. - Both Secondary seed and member will be at the receiving end when Primary seed is active.
1.3.6.1.4.1.45.6.1.5.0.70current