MIBs Depot

NTRON714FX6-MIB

Registered at
1.3.6.1.4.1.28381
Last updated
2014-07-22 20:00
Organization
N-Tron Corporation
Revisions
2014-07-22 20:00, 2014-07-14 19:00, 2011-05-26 15:00, 2011-05-10 19:00, 2011-02-07 15:00, 2009-11-17 19:15
Namespace
redlion
Source file
NTRON714FX6-MIB
Digest
sha256:f6c702f14d55f6fe84e7201eaf8fae7ab3ad16d4a72f4087ed6d60c5cee46520

Description

Added ntron and series specific identifiers, fixed port Sequence and changed TRAP-TYPE to NOTIFICATION-TYPE

Contact

Internet: http://www.n-tron.com E-Mail: N-TRON_Support@n-tron.com

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

NTRON714FX6-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
ntron
OBJECT-IDENTITY
1.3.6.1.4.1.28381
ntron7xx
OBJECT-IDENTITY
1.3.6.1.4.1.28381.700
ntronSysGroup
OBJECT-IDENTITY
1.3.6.1.4.1.28381.700.7.1
ntronSysReset
OBJECT-TYPE
Setting this object to 'switchReset' will cause the switch to perform a hardware reset within approximately 4-6 seconds.Setting this object to 'switchNoReset ' will have no effect.The value 'switchNoReset' will be returned whenever this object is retrieved .
1.3.6.1.4.1.28381.700.7.1.1INTEGER {switchNoReset(1), switchReset(2)}read-writecurrent
ntronSwVersion
OBJECT-TYPE
This object identifies the Version Number of Current Release.
1.3.6.1.4.1.28381.700.7.1.2DisplayString (SIZE(0..255))read-onlycurrent
ntronBuildDateAndTime
OBJECT-TYPE
This object will hold the image build date and time.
1.3.6.1.4.1.28381.700.7.1.3DisplayString (SIZE(0..100))read-onlycurrent
ntronTotalRam
OBJECT-TYPE
This object will give the total RAM available in the system.
1.3.6.1.4.1.28381.700.7.1.4Integer32read-onlycurrent
ntronTotalFlash
OBJECT-TYPE
This object will give the total Flash available in system.
1.3.6.1.4.1.28381.700.7.1.5Integer32read-onlycurrent
ntronEthernetPortCount
OBJECT-TYPE
This object will return the number of 10/100 Mbps Ethernet ports on the switch.
1.3.6.1.4.1.28381.700.7.1.6Integer32read-onlycurrent
ntronCurrentIpAddress
OBJECT-TYPE
The Current IP address is the one which is currently used and is obtained dynamically through protocol interaction.( DHCP ) This address is NULL if the Address is Statically configured.
1.3.6.1.4.1.28381.700.7.1.7IpAddressread-onlycurrent
ntronConfiguredIpAddress
OBJECT-TYPE
The Configured IP address of the device. This is the address configured through Network or cli.
1.3.6.1.4.1.28381.700.7.1.8IpAddressread-writecurrent
ntronConfiguredSubnetMask
OBJECT-TYPE
The Configured Subnet Mask of the device.
1.3.6.1.4.1.28381.700.7.1.9IpAddressread-writecurrent
ntronConfiguredGateway
OBJECT-TYPE
The Configured Gateway/Router address of the device
1.3.6.1.4.1.28381.700.7.1.10IpAddressread-writecurrent
ntronUpdateConfiguredIpAddr
OBJECT-TYPE
By setting this object to enable will update the ipaddress, subnetmask and the router ip address.
1.3.6.1.4.1.28381.700.7.1.11INTEGER {disable(1), enable(2)}read-writecurrent
ntronIPAddressStatus
OBJECT-TYPE
The IP Address can be obtained/configured by any of the above different ways. This object specifies how IP address currently on the switch , was configured/obtained.
1.3.6.1.4.1.28381.700.7.1.12INTEGER {fromCli(1), fromDhcp(2)}read-onlycurrent
ntronTotalNoOfPorts
OBJECT-TYPE
This object will give the total number of ports available in the device .
1.3.6.1.4.1.28381.700.7.1.13Integer32read-onlycurrent
ntronMacAddress
OBJECT-TYPE
The mac address of the system .
1.3.6.1.4.1.28381.700.7.1.14DisplayString (SIZE(0..40))read-onlycurrent
ntronContactStatus
OBJECT-TYPE
The status of the switch contact .
1.3.6.1.4.1.28381.700.7.1.15INTEGER {open(1), closed(2), unsupported(3)}read-onlycurrent
ntronPowerFault
OBJECT-TYPE
The power fault status .
1.3.6.1.4.1.28381.700.7.1.16INTEGER {faultNone(1), faultPower1(2), faultPower2(3)}read-onlycurrent
ntronModelString
OBJECT-TYPE
This object will hold the switch model string.
1.3.6.1.4.1.28381.700.7.1.17DisplayString (SIZE(0..100))read-onlycurrent
ntronBlVersion
OBJECT-TYPE
This object identifies the Version Number of Current Bootloader Release.
1.3.6.1.4.1.28381.700.7.1.18DisplayString (SIZE(0..255))read-onlycurrent
ntronNViewGroup
OBJECT-IDENTITY
1.3.6.1.4.1.28381.700.7.2
ntronNViewState
OBJECT-TYPE
Global status of NView broadcasts.
1.3.6.1.4.1.28381.700.7.2.1INTEGER {disable(1), enable(2)}read-writecurrent
ntronNViewInterval
OBJECT-TYPE
Global interval between NView broadcasts.
1.3.6.1.4.1.28381.700.7.2.2Integer32 (5..500)read-writecurrent
ntronNViewTable
OBJECT-TYPE
The table that contains the information about the per port NView status.
1.3.6.1.4.1.28381.700.7.2.3not-accessiblecurrent
ntronNViewEntry
OBJECT-TYPE
An entry in the ntronNViewTable.
1.3.6.1.4.1.28381.700.7.2.3.1not-accessiblecurrent
ntronNViewPortNumber
OBJECT-TYPE
The unique identifier to identify the entry in the ntronNViewTable.
1.3.6.1.4.1.28381.700.7.2.3.1.1Integer32read-onlycurrent
ntronNViewMulticast
OBJECT-TYPE
The status of a port for transmitting NView packets.
1.3.6.1.4.1.28381.700.7.2.3.1.2INTEGER {disable(1), enable(2)}read-writecurrent
ntronNViewStats
OBJECT-TYPE
The status of a port for having its stats sent as NView packets.
1.3.6.1.4.1.28381.700.7.2.3.1.3INTEGER {disable(1), enable(2)}read-writecurrent
ntronTFTPGroup
OBJECT-IDENTITY
1.3.6.1.4.1.28381.700.7.3
ntronTFTPServerIpAddress
OBJECT-TYPE
The ipaddress of the Tftp server.
1.3.6.1.4.1.28381.700.7.3.1IpAddressread-writecurrent
ntronTFTPRemoteFileName
OBJECT-TYPE
The field gives the file name to be downloaded.
1.3.6.1.4.1.28381.700.7.3.2DisplayString (SIZE(0..32))read-writecurrent
ntronTFTPAction
OBJECT-TYPE
Setting this object to the value mentioned above will cause the specific function to be called. When performing config actions either the config flags below or the same defaults as on the web will be used if not set as below.
1.3.6.1.4.1.28381.700.7.3.3INTEGER {noAction(1), downloadImage(2), configUpload(3), configDownload(4), downloadBootImage(6)}read-writecurrent
ntronTFTPConfigFlags
OBJECT-TYPE
If not manually set by the user the web default values will be used in the above action. Flags are reset to use the default values when ntronTFTPAction is complete
1.3.6.1.4.1.28381.700.7.3.4INTEGER {main(1), snmp(2), dhcp(4), macSec(8), macSecManualOnly(16), keepCurrentIp(32)}read-writecurrent
ntronPortMirroringGroup
OBJECT-IDENTITY
1.3.6.1.4.1.28381.700.7.7
ntronMirroringState
OBJECT-TYPE
This Field gives the current state of the mirror. Setting this object to an value enable the mirror .If disabled, port operation works normally. No Traffic gets routed from MirroringSourcePort to Destination Mirrored Port.
1.3.6.1.4.1.28381.700.7.7.1INTEGER {enable(1), disable(2)}read-writecurrent
ntronMirroringDestinationPort
OBJECT-TYPE
This is the Destination port number for which there is another mirror port.If the ntronMirroringState is Enabled then the mirror port gets routed with all the packets going in and out of Destination port. This arrangement is to put an RMON Probe on mirrored port to Probe the traffic on the Destination port. One of the port is dedicated to this so that for any port as destination port, this dedicated port can be a mirrored port. This object will return a '0' if the MirrorState is not enabled.
1.3.6.1.4.1.28381.700.7.7.2Integer32read-writecurrent
ntronPortMirroringTable
OBJECT-TYPE
The table which contains the mirroring information of the ports .
1.3.6.1.4.1.28381.700.7.7.3not-accessiblecurrent
ntronPortMirroringEntry
OBJECT-TYPE
An entry in the ntronPortMirroringTable.
1.3.6.1.4.1.28381.700.7.7.3.1not-accessiblecurrent
ntronPortMirroringNo
OBJECT-TYPE
This object identifies the port of the switch.
1.3.6.1.4.1.28381.700.7.7.3.1.1Integer32read-onlycurrent
ntronPortMirroringTx
OBJECT-TYPE
This object shows the mirror Tx status of the port.
1.3.6.1.4.1.28381.700.7.7.3.1.2Integer32read-writecurrent
ntronPortMirroringRx
OBJECT-TYPE
This object shows the mirror Rx status of the port.
1.3.6.1.4.1.28381.700.7.7.3.1.3Integer32read-writecurrent
ntronPortConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.28381.700.7.8
ntronPortConfigTable
OBJECT-TYPE
The table which contains the statistics information of the ports.
1.3.6.1.4.1.28381.700.7.8.1not-accessiblecurrent
ntronPortConfigEntry
OBJECT-TYPE
An entry in the ntronPortStatisticsTable.
1.3.6.1.4.1.28381.700.7.8.1.1not-accessiblecurrent
ntronPortNo
OBJECT-TYPE
This object identifies the port of the switch.
1.3.6.1.4.1.28381.700.7.8.1.1.1Integer32read-onlycurrent
ntronPortName
OBJECT-TYPE
This attribute associates a user defined string name with the port.
1.3.6.1.4.1.28381.700.7.8.1.1.2DisplayStringread-onlycurrent
ntronPortAdminState
OBJECT-TYPE
This attribute allows an administrative request to disable or enable communications on this port.
1.3.6.1.4.1.28381.700.7.8.1.1.3INTEGER {disabled(1), enabled(2)}read-writecurrent
ntronPortSpeed
OBJECT-TYPE
This attribute allows an administrative request to read/write the speed of this port.
1.3.6.1.4.1.28381.700.7.8.1.1.4INTEGER {tenMbps(1), hundredMbps(2), thousandMbps(3)}read-writecurrent
ntronPortDuplexStatus
OBJECT-TYPE
This attribute allows an administrative request to read the status of Duplex on this port.
1.3.6.1.4.1.28381.700.7.8.1.1.5INTEGER {half(1), full(2)}read-writecurrent
ntronPortLinkState
OBJECT-TYPE
This attribute allows an administrative request to read the status of link state on this port.
1.3.6.1.4.1.28381.700.7.8.1.1.6INTEGER {down(1), up(2)}read-onlycurrent
ntronPortPriority
OBJECT-TYPE
This attribute allows an administrative request to read/write the Priority of the port.
1.3.6.1.4.1.28381.700.7.8.1.1.7Integer32 (0..7)read-writecurrent
ntronPortFlowControl
OBJECT-TYPE
This per-port attribute describes whether the port identified has flow Control Enabled or not. Flow Control on Full Duplex and Half Duplex is detected and Automatically, flow control accordingly is taken care of. BY Default, Flow Control is Disabled.
1.3.6.1.4.1.28381.700.7.8.1.1.8INTEGER {disable(1), enable(2)}read-writecurrent
ntronPortBackPressure
OBJECT-TYPE
This per-port attribute describes whether the port identified has BackPressure Enabled or not. BY Default, BackPressure is Disabled.
1.3.6.1.4.1.28381.700.7.8.1.1.9INTEGER {disable(1), enable(2)}read-writecurrent
ntronPortAutonegotiation
OBJECT-TYPE
This per-port attribute describes whether the port identified has AutoNegotiation Enabled or not. BY Default, BackPressure is Disabled.
1.3.6.1.4.1.28381.700.7.8.1.1.10INTEGER {disable(1), enable(2)}read-writecurrent
ntronPortOverWritePriority
OBJECT-TYPE
This per-port attribute describes whether the port identified has OverWritePriority Enabled or not. BY Default, BackPressure is Disabled.
1.3.6.1.4.1.28381.700.7.8.1.1.11INTEGER {disable(1), enable(2)}read-writecurrent
ntronPortPVID
OBJECT-TYPE
This is the port VLAN ID.
1.3.6.1.4.1.28381.700.7.8.1.1.12Integer32read-writecurrent
ntronPortCrossover
OBJECT-TYPE
This is the port setting for Crossover.
1.3.6.1.4.1.28381.700.7.8.1.1.13INTEGER {auto(1), yes(2), no(3)}read-writecurrent
ntronIgmpGroup
OBJECT-IDENTITY
1.3.6.1.4.1.28381.700.7.9
ntronIgmpState
OBJECT-TYPE
This object holds the current state of the igmp. By configuring this to Enable, the igmp will be enabled.
1.3.6.1.4.1.28381.700.7.9.1INTEGER {disable(1), enable(2)}read-writecurrent
ntronQueryMode
OBJECT-TYPE
To set the switch's query mode.
1.3.6.1.4.1.28381.700.7.9.2INTEGER {off(1), auto(2), on(3)}read-writecurrent
ntronRouterMode
OBJECT-TYPE
To set the switch's router mode.
1.3.6.1.4.1.28381.700.7.9.3INTEGER {none(1), auto(2), manual(3)}read-writecurrent
ntronIgmpMemberTable
OBJECT-TYPE
The table that contains the information about the igmp members.
1.3.6.1.4.1.28381.700.7.9.4not-accessiblecurrent
ntronIgmpMemberEntry
OBJECT-TYPE
An entry in the igmp member table.
1.3.6.1.4.1.28381.700.7.9.4.1not-accessiblecurrent
ntronIgmpMemberTableIndex
OBJECT-TYPE
The unique identifier to identify the igmp member.
1.3.6.1.4.1.28381.700.7.9.4.1.1Integer32read-onlycurrent
ntronIgmpGroupIpAddress
OBJECT-TYPE
The IpAddress of the Multicast Group.
1.3.6.1.4.1.28381.700.7.9.4.1.2IpAddressread-onlycurrent
ntronIgmpPortNumber
OBJECT-TYPE
The port number from which the multicast Ip is received.
1.3.6.1.4.1.28381.700.7.9.4.1.3Integer32read-onlycurrent
ntronIgmpVlanId
OBJECT-TYPE
The Vlan Id to which the igmpPortNumber belongs.
1.3.6.1.4.1.28381.700.7.9.4.1.4Integer32read-onlycurrent
ntronIgmpRouterTable
OBJECT-TYPE
The table that contains the information about the igmp routers.
1.3.6.1.4.1.28381.700.7.9.5not-accessiblecurrent
ntronIgmpRouterEntry
OBJECT-TYPE
An entry in the igmp router table.
1.3.6.1.4.1.28381.700.7.9.5.1not-accessiblecurrent
ntronIgmpRouterTableIndex
OBJECT-TYPE
The unique identifier to identify the igmp router.
1.3.6.1.4.1.28381.700.7.9.5.1.1Integer32read-onlycurrent
ntronIgmpRouterIpAddress
OBJECT-TYPE
The IpAddress of the Router.
1.3.6.1.4.1.28381.700.7.9.5.1.2IpAddressread-onlycurrent
ntronIgmpRouterPortNumber
OBJECT-TYPE
The port no from which the router query has been received.
1.3.6.1.4.1.28381.700.7.9.5.1.3Integer32read-onlycurrent
ntronIgmpPortTable
OBJECT-TYPE
The table that contains the information about the igmp port status.
1.3.6.1.4.1.28381.700.7.9.6not-accessiblecurrent
ntronIgmpPortEntry
OBJECT-TYPE
An entry in the igmp port table.
1.3.6.1.4.1.28381.700.7.9.6.1not-accessiblecurrent
ntronIgmpPortTableIndex
OBJECT-TYPE
The unique identifier to identify the igmp port.
1.3.6.1.4.1.28381.700.7.9.6.1.1Integer32read-onlycurrent
ntronIgmpPortManRouter
OBJECT-TYPE
Per-Port Attribute for if the port is a Manual Router Port
1.3.6.1.4.1.28381.700.7.9.6.1.2INTEGER {disable(1), enable(2)}read-writecurrent
ntronIgmpPortRFilter
OBJECT-TYPE
Per-Port Attribute for if the port has RFilter enabled
1.3.6.1.4.1.28381.700.7.9.6.1.3INTEGER {disable(1), enable(2)}read-writecurrent
ntronBroadcastGroup
OBJECT-IDENTITY
1.3.6.1.4.1.28381.700.7.13
ntronBroadcastBPCLTable
OBJECT-TYPE
The table that contains the information about the best packet count limit.
1.3.6.1.4.1.28381.700.7.13.1not-accessiblecurrent
ntronBroadcastBPCLEntry
OBJECT-TYPE
An entry in the ntronBroadcastBPCLTable.
1.3.6.1.4.1.28381.700.7.13.1.1not-accessiblecurrent
ntronBroadcastPortNumber
OBJECT-TYPE
The unique identifier to identify the entry in the ntronBroadcastBPCLTable.
1.3.6.1.4.1.28381.700.7.13.1.1.1Integer32read-onlycurrent
ntronBroadcastPercentage
OBJECT-TYPE
The percentage of broadcast packets that can be allowed.
1.3.6.1.4.1.28381.700.7.13.1.1.2Integer32 (0..100)read-writecurrent
ntronConfigGroup
OBJECT-IDENTITY
1.3.6.1.4.1.28381.700.7.14
ntronConfigSave
OBJECT-TYPE
If this configurable object is set to enable then all the Configured data of the all the modules is written into flash.
1.3.6.1.4.1.28381.700.7.14.1INTEGER {disable(1), enable(2)}read-writecurrent
ntronConfigErase
OBJECT-TYPE
Setting this object to the value mentioned above will cause the specific function to be called. When performing the enable action either the config flags below or the same defaults as on the web will be used if not set as below. Any of the other options will ignore the below flags and do as they are described
1.3.6.1.4.1.28381.700.7.14.2INTEGER {disable(1), enable(2), keepip(3), keepusers(4), keepipandusers(5)}read-writecurrent
ntronConfigEraseFlags
OBJECT-TYPE
If not manually set by the user the web default values will be used in the above action. Flags are reset to use the default values when ntronConfigErase is complete
1.3.6.1.4.1.28381.700.7.14.3INTEGER {keepIp(1), keepUsers(2), keepSNMP(4), keepDHCPS(8), keepMacSec(16)}read-writecurrent
ntronSnmpGroup
OBJECT-IDENTITY
1.3.6.1.4.1.28381.700.7.15
ntronSnmpGetCommunityName
OBJECT-TYPE
The community name used to authenticate the get/getnext request from snmp Manager.
1.3.6.1.4.1.28381.700.7.15.1DisplayString (SIZE(3..15))read-writecurrent
ntronSnmpTrapCommunityName
OBJECT-TYPE
The community name used to authenticate the Trap request to snmp Manager.
1.3.6.1.4.1.28381.700.7.15.2DisplayString (SIZE(3..15))read-writecurrent
ntronSnmpManagerIpAddressTable
OBJECT-TYPE
The ip address table of the snmp managers.
1.3.6.1.4.1.28381.700.7.15.3not-accessiblecurrent
ntronSnmpManagerIpAddressEntry
OBJECT-TYPE
An entry in the ntronSnmpManagerIpAddressTable
1.3.6.1.4.1.28381.700.7.15.3.1not-accessiblecurrent
ntronSnmpManagerTableIndex
OBJECT-TYPE
The index of the snmp manager.
1.3.6.1.4.1.28381.700.7.15.3.1.1Integer32read-onlycurrent
ntronSnmpManagerIpAddress
OBJECT-TYPE
The Ip Address of the snmp Manager.
1.3.6.1.4.1.28381.700.7.15.3.1.2IpAddressread-writecurrent
ntronNRingGroup
OBJECT-IDENTITY
1.3.6.1.4.1.28381.700.7.16
ntronNRingMode
OBJECT-TYPE
Operational mode of NRing system.
1.3.6.1.4.1.28381.700.7.16.1INTEGER {disabled(1), automember(2), activemember(3), manager(4), multimember(5)}read-onlycurrent
ntronNRingState
OBJECT-TYPE
Status of NRing system.
1.3.6.1.4.1.28381.700.7.16.2INTEGER {healthy(1), broken-lo(2), broken-hi(3), broken(4)}read-onlycurrent
ntronNRingVersion
OBJECT-TYPE
Version of NRing system.
1.3.6.1.4.1.28381.700.7.16.3Integer32read-onlycurrent
ntronTrapGroup
OBJECT-IDENTITY
1.3.6.1.4.1.28381.700.7.18

Notifications

NameOIDStatus
ntronPowerChange
NOTIFICATION-TYPE
An ntronPowerChange trap signifies that the sending SNMP application entity recognizes a change in the power fault variable either from a power failure or a restoration of power.
1.3.6.1.4.1.28381.700.7.18.1current