MIBs Depot

NTNTECH-CHASSIS-CONFIGURATION-MIB

Registered at
1.3.6.1.4.1.8059.1.1.1
Last updated
1904-11-17 02:00
Organization
Paradyne Corporation
Revisions
1902-08-13 11:12, 1902-08-28 09:12, 1902-10-11 09:13, 1902-10-22 02:00, 1902-11-04 12:58, 1904-03-15 10:15, 1904-04-27 11:16, 1904-10-11 09:09, 1904-11-17 09:58
Namespace
zhone
Source file
NTNTECH-CHASSIS-CONFIGURATION-MIB
Digest
sha256:6f634d073156fc0d80350b95fe6225f5ed6bff6afdb6fcea54f9131dc30e6a03

Description

This mib module defines an SNMP API to manage the Paradyne Corporation's DSLAM chassis parameters. These parameter settings are specifically associated with the the MUM200-2 and MUM2000-2 modules and the Mini and Micro DSLAMs. The interface types are described below, AMD8000-12 12-Port ADSL Mini DSLAMs With Full Rate and G.lite Operational Modes SMD2000-12, SMD2000Q-12, SMD2000G-12 12-Port SDSL Mini DSLAMs: AC and DC Versions with Cap, 2B1Q and G.SHDSL line encoding SuD2011_12T, SuD2011_12E, SuD2003_12T, SuD2003_12E 12-Port SDSL Micro DSLAMs: Cap, 2B1Q and G.SHDSL line encoding SuD2011_6T, SuD2011_6E, SuD2002_6T, SuD2002_6E 6-Port SDSL Micro DSLAMs: Cap, 2B1Q and G.SHDSL line encoding MUM200-2, MUM2000-2 Multiplexer Uplink Module with Dual Uplink Interface Module Capacity UIM-10/100 Uplink Interface Module UIM-DS3 DS3 Uplink Interface Module UIM-E1 E1 Uplink Interface Module UIM-E3 E3 Uplink Interface Module UIM-T1 T1 Uplink Interface Module

Contact

Paradyne Corporation 8545 126th Avenue North Largo, FL 33773 phone: +1 (727) 530 2000 email: support@paradyne.com www: http://www.nettonet.com/support/

Imports

FromSymbols
NTNTECH-ROOT-MIBNtnDefaultGateway, NtnDisplayString, NtnSubnetMask, NtnTimeTicks, ntntechChassis
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIIpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

NTNTECH-CHASSIS-CONFIGURATION-MIB
NTNTECH-ROOT-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
chsCfgMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.8059.1.1.1.1
chsCfgParameterConfiguration
OBJECT-IDENTITY
1.3.6.1.4.1.8059.1.1.1.1.1
prmCfgMultiplexerUplinkModule
OBJECT-IDENTITY
1.3.6.1.4.1.8059.1.1.1.1.1.1
mumCfgNotes
OBJECT-TYPE
The chassis system 'Notes' field is to be used as a scratchpad (i.e. chassis id or name) by the administrator. The default value is blank. The length of string must not exceed 128 alpha-numeric characters.
1.3.6.1.4.1.8059.1.1.1.1.1.1.1NtnDisplayStringread-writecurrent
mumCfgTable
OBJECT-TYPE
A list of MUM200-2/2000-2 module or Mini/Micro DSLAM entries.
1.3.6.1.4.1.8059.1.1.1.1.1.1.2not-accessiblecurrent
mumCfgEntry
OBJECT-TYPE
An entry containing management information applicable to a MUM200-2/MUM2000-2 module or Mini/Micro DSLAM.
1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1not-accessiblecurrent
mumCfgIndex
OBJECT-TYPE
Translates to the physical slot number that a MUM200-2/2000-2 module exists within a chassis. The Mini/Micro DSLAMs' physical location is set to 1 by default. See below, chassis type physical location(s) translation ------------ -------------------------------- IPD12000 MUM in slots 13,14 = mumCfgIndex 1,2 respecitively IPD4000 MUM in slot 5 = mumCfgIndex 1 Mini DSLAM NA = mumCfgIndex 1 Micro DSLAM NA = mumCfgIndex 1
1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.1INTEGER (1..2)read-onlycurrent
mumCfgIpAddress
OBJECT-TYPE
IP Address assigned to a MUM200-2/2000-2 module or Mini/Micro DSLAM. This parameter is initially set to a default value, i.e 192.168.254.252 for a MUM200-2/2000-2 module located in slot 13 of an IPD12000, slot 5 of an IPD4000 DSLAM and a Mini/Micro DSLAM. The default value of 192.168.254.253 will be for a MUM200-2/2000-2 module located in slot 14 of an IPD12000 (duplicate IP addresses are not allowed). These default values can be modified by the user.
1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.2IpAddressread-writecurrent
mumCfgSubnetMask
OBJECT-TYPE
The Subnet Mask assigned to a MUM200-2/2000-2 module or Mini/Micro DSLAM. This parameter is assiged by the user, the default value is 255.255.255.0.
1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.3IpAddressread-writecurrent
mumCfgDefaultGateway
OBJECT-TYPE
The Default Gateway assigned to a MUM200-2/2000-2 module or Mini/Micro DSLAM. This value is assiged by the user, the default value is 0.0.0.0.
1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.4IpAddressread-writecurrent
mumCfgInbandMgmt
OBJECT-TYPE
Inband management feature, when enabled [ON(1)], allows access to the DSLAM via the network against an assigned IP address, subnet mask, and default gateway.
1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.5INTEGER {on(1), off(2)}read-writecurrent
mumCfgInbandMGMTVlanID
OBJECT-TYPE
The IP DSLAM supports 802.1Q Virtual LANs (VLANs). This parameter configuration applies to the inband management traffic only. It does not apply to out of band traffic received from the MGMT port. Note: for the case where the chassis type is an IPD12000 loaded with two MUMs, the setting of this parameter will affect both.
1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.6INTEGER (0..4085)read-writecurrent
mumCfgInterConnection
OBJECT-TYPE
IPD12000 or IPD4000 DSLAM interconnect configuration provides the system manager the ability to daisy-chain one IP DSLAM to another so that a single router may be used for all DSLAMs in the chain.
1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.7INTEGER {neither(1), uplink1(2), uplink2(3), uplink3(4), uplink4(5), mgmt(6)}read-writecurrent
mumCfgCommitChange
OBJECT-TYPE
Set to enabled(1) in order to commit the latest changes to the IP address, subnetmask, default gateway chassis parameters. This is only applicable to the SNE2040G-P and the SNE2040G-S.
1.3.6.1.4.1.8059.1.1.1.1.1.1.2.1.8INTEGER {disabled(0), enabled(1)}read-writecurrent
mumCfgUplinkInterfaceModule
OBJECT-IDENTITY
1.3.6.1.4.1.8059.1.1.1.1.1.1.3
uimCfgEthTable
OBJECT-TYPE
A list of ethernet Uplink Interface Module (UIM) entries.
1.3.6.1.4.1.8059.1.1.1.1.1.1.3.1not-accessiblecurrent
uimCfgEthEntry
OBJECT-TYPE
An entry containing information applicable to an ethernet Uplink Interface Module (UIM).
1.3.6.1.4.1.8059.1.1.1.1.1.1.3.1.1not-accessiblecurrent
uimCfgEthMumIndex
OBJECT-TYPE
Translates to the physical slot number that a MUM200-2/2000-2 module exists within a chassis. The Mini/Micro DSLAMs' physical location is set to 1 by default. See below, chassis type physical location(s) translation ------------ -------------------------------- IPD12000 MUM in slots 13,14 = uimCfgEthMumIndex 1,2 respecitively IPD4000 MUM in slot 5 = uimCfgEthMumIndex 1 Mini DSLAM NA = uimCfgEthMumIndex 1 Micro DSLAM NA = uimCfgEthMumIndex 1 Note: when configuring an ethernet UIM, the user must enter the index of the MUM, see above table, that corresponds with the IP address of the remote SNMP agent.
1.3.6.1.4.1.8059.1.1.1.1.1.1.3.1.1.1INTEGER (1..2)read-onlycurrent
uimCfgEthIndex
OBJECT-TYPE
The physical slot used to access the UIM in the MUM200-2/2000-2 module or Mini/Micro DSLAM.
1.3.6.1.4.1.8059.1.1.1.1.1.1.3.1.1.2INTEGER (1..4)read-onlycurrent
uimCfgEthRxTxRate
OBJECT-TYPE
The RxTx rate for an ethernet UIM.
1.3.6.1.4.1.8059.1.1.1.1.1.1.3.1.1.3INTEGER {uimEthAutoNegotiate(0), uimEth10(1), uimEth100(2), uimEthGig(3)}read-writecurrent
uimCfgEthDuplex
OBJECT-TYPE
The current duplex setting for an ethernet UIM.
1.3.6.1.4.1.8059.1.1.1.1.1.1.3.1.1.4INTEGER {uimEthAutoNegotiate(0), uimEthHalf(1), uimEthFull(2)}read-writecurrent
uimCfgT1Table
OBJECT-TYPE
A list of T1 Uplink Interface Module (UIM) entries.
1.3.6.1.4.1.8059.1.1.1.1.1.1.3.2not-accessiblecurrent
uimCfgT1Entry
OBJECT-TYPE
An entry containing information applicable to a T1 Uplink Interface Module (UIM).
1.3.6.1.4.1.8059.1.1.1.1.1.1.3.2.1not-accessiblecurrent
uimCfgT1MumIndex
OBJECT-TYPE
Translates to the physical slot number that a MUM200-2/2000-2 module exists within a chassis. The Mini/Micro DSLAMs' physical location is set to 1 by default. See below, chassis type physical location(s) translation ------------ -------------------------------- IPD12000 MUM in slots 13,14 = uimCfgT1MumIndex 1,2 respecitively IPD4000 MUM in slot 5 = uimCfgT1MumIndex 1 Mini DSLAM NA = uimCfgT1MumIndex 1 Micro DSLAM NA = uimCfgT1MumIndex 1 Note: when configuring a T1 UIM, the user must enter the index of the MUM, see above table, that corresponds with the IP address of the remote SNMP agent.
1.3.6.1.4.1.8059.1.1.1.1.1.1.3.2.1.1INTEGER (1..2)read-onlycurrent
uimCfgT1Index
OBJECT-TYPE
The physical slot used to access the UIM in the MUM200-2/2000-2 module or Mini/Micro DSLAM.
1.3.6.1.4.1.8059.1.1.1.1.1.1.3.2.1.2INTEGER (1..4)read-onlycurrent
uimCfgT1Frame
OBJECT-TYPE
The frame type parameter for a T1 UIM.
1.3.6.1.4.1.8059.1.1.1.1.1.1.3.2.1.3INTEGER {uimT1ESF(1), uimT1SFD4(2)}read-writecurrent
uimCfgT1LineCode
OBJECT-TYPE
The line code parameter for a T1 UIM.
1.3.6.1.4.1.8059.1.1.1.1.1.1.3.2.1.4INTEGER {uimT1B8ZS(1), uimT1AMI(2)}read-writecurrent
uimCfgT1LineBuildout
OBJECT-TYPE
The line buildout parameter for a T1 UIM.
1.3.6.1.4.1.8059.1.1.1.1.1.1.3.2.1.5INTEGER {uimT10db(1), uimT1N7p5db(2), uimT1N15db(3), uimT1N22p5db(4)}read-writecurrent
uimCfgE1Table
OBJECT-TYPE
A list of E1 Uplink Interface Module (UIM) entries.
1.3.6.1.4.1.8059.1.1.1.1.1.1.3.3not-accessiblecurrent
uimCfgE1Entry
OBJECT-TYPE
An entry containing information applicable to an E1 Uplink Interface Module (UIM).
1.3.6.1.4.1.8059.1.1.1.1.1.1.3.3.1not-accessiblecurrent
uimCfgE1MumIndex
OBJECT-TYPE
Translates to the physical slot number that a MUM200-2/2000-2 module exists within a chassis. The Mini/Micro DSLAMs' physical location is set to 1 by default. See below, chassis type physical location(s) translation ------------ -------------------------------- IPD12000 MUM in slots 13,14 = uimCfgE1MumIndex 1,2 respecitively IPD4000 MUM in slot 5 = uimCfgE1MumIndex 1 Mini DSLAM NA = uimCfgE1MumIndex 1 Micro DSLAM NA = uimCfgE1MumIndex 1 Note: when configuring an E1 UIM, the user must enter the index of the MUM, see above table, that corresponds with the IP address of the remote SNMP agent.
1.3.6.1.4.1.8059.1.1.1.1.1.1.3.3.1.1INTEGER (1..2)read-onlycurrent
uimCfgE1Index
OBJECT-TYPE
The physical slot used to access the UIM in the MUM200-2/2000-2 module or Mini/Micro DSLAM.
1.3.6.1.4.1.8059.1.1.1.1.1.1.3.3.1.2INTEGER (1..4)read-onlycurrent
uimCfgE1Frame
OBJECT-TYPE
The frame type parameter for an E1 UIM.
1.3.6.1.4.1.8059.1.1.1.1.1.1.3.3.1.3INTEGER {uimE1CRC(1), uimE1NoCRC(2)}read-writecurrent
uimCfgE1LineCode
OBJECT-TYPE
The line code parameter for an E1 UIM.
1.3.6.1.4.1.8059.1.1.1.1.1.1.3.3.1.4INTEGER {uimE1HDB3(1), uimE1AMI(2)}read-writecurrent
mumSNMPConfiguration
OBJECT-IDENTITY
1.3.6.1.4.1.8059.1.1.1.1.1.1.4
snmpCfgNoticeIpTable
OBJECT-TYPE
A list of SNMP trap notification Ip Addresses.
1.3.6.1.4.1.8059.1.1.1.1.1.1.4.1not-accessiblecurrent
snmpCfgNoticeIpEntry
OBJECT-TYPE
An entry containing SNMP information applicable to a MUM200-2/MUM2000-2 module or Mini/Micro DSLAM.
1.3.6.1.4.1.8059.1.1.1.1.1.1.4.1.1not-accessiblecurrent
snmpCfgNoticeIndex
OBJECT-TYPE
An integer value that points to one of four trap notification IP addresses.
1.3.6.1.4.1.8059.1.1.1.1.1.1.4.1.1.1INTEGER (1..4)read-onlycurrent
snmpCfgNoticeIpAddress
OBJECT-TYPE
IP Address of the location or computer to which you would like trap notifications sent. The default value is 0.0.0.0 and it can be modified by the user.
1.3.6.1.4.1.8059.1.1.1.1.1.1.4.1.1.2IpAddressread-writecurrent
snmpCfgAuthenticationTrapState
OBJECT-TYPE
Indicates whether Authentication traps should be generated. By default, this object should have the value enabled(1).
1.3.6.1.4.1.8059.1.1.1.1.1.1.4.2INTEGER {enabled(1), disabled(2)}read-writecurrent
snmpCfgEnvironmentTrapState
OBJECT-TYPE
Indicates whether the fan and temperature traps should be generated. By default, this object should have the value enabled(1).
1.3.6.1.4.1.8059.1.1.1.1.1.1.4.3INTEGER {enabled(1), disabled(2)}read-writecurrent
snmpCfgColdstartTrapState
OBJECT-TYPE
Indicates whether Cold Start traps should be generated. By default, this object should have the value disabled(2).
1.3.6.1.4.1.8059.1.1.1.1.1.1.4.4INTEGER {enabled(1), disabled(2)}read-writecurrent
snmpCfgModulePortTrapState
OBJECT-TYPE
Indicates whether the module present/removed and link up/down traps should be generated. By default, this object should have the value disabled(2).
1.3.6.1.4.1.8059.1.1.1.1.1.1.4.5INTEGER {enabled(1), disabled(2)}read-writecurrent
snmpCfgCommunity
OBJECT-IDENTITY
1.3.6.1.4.1.8059.1.1.1.1.1.1.4.6
comReadWriteAccess
OBJECT-TYPE
The community string that will allow the user read/write access to the agent. In otherwords, the user will be allowed to view and set parameter attributes. Note: since this is a hidden attribute, for security purposes, when performing a get on this OID the string that is returned will be represented by asterisk(s).
1.3.6.1.4.1.8059.1.1.1.1.1.1.4.6.1OCTET STRING (SIZE(0..15))read-writecurrent
comReadOnlyAccess
OBJECT-TYPE
The community string that will allow the user read access to the agent. In otherwords, the user will be allowed to view parameter attributes. Note: since this is a hidden attribute, for security purposes, when performing a get on this OID the string that is returned will be represented by asterisk(s).
1.3.6.1.4.1.8059.1.1.1.1.1.1.4.6.2OCTET STRING (SIZE(0..15))read-writecurrent
mumCfgUniques
OBJECT-IDENTITY
1.3.6.1.4.1.8059.1.1.1.1.1.1.5
unqEmbHttpWebsrvrState
OBJECT-TYPE
This configuration parameter allows the user the ability to disable, or enable, the embedded webserver. By default, this object should have the value enabled(1).
1.3.6.1.4.1.8059.1.1.1.1.1.1.5.1INTEGER {enabled(1), disabled(2)}read-writecurrent
mumCfgAdvanced
OBJECT-IDENTITY
1.3.6.1.4.1.8059.1.1.1.1.1.1.6
advCfgTable
OBJECT-TYPE
A list of the Advanced Configuration entries.
1.3.6.1.4.1.8059.1.1.1.1.1.1.6.1not-accessiblecurrent
advCfgEntry
OBJECT-TYPE
An entry containing information applicable to an Advanced Configuration parameter.
1.3.6.1.4.1.8059.1.1.1.1.1.1.6.1.1not-accessiblecurrent
advCfgMumIndex
OBJECT-TYPE
Translates to the physical slot number that a MUM200-2/2000-2 module exists within a chassis. The Mini/Micro DSLAMs' physical location is set to 1 by default. See below, chassis type physical location(s) translation ------------ -------------------------------- IPD12000 MUM in slots 13,14 = uimCfgE1MumIndex 1,2 respecitively IPD4000 MUM in slot 5 = uimCfgE1MumIndex 1 Mini DSLAM NA = uimCfgE1MumIndex 1 Micro DSLAM NA = uimCfgE1MumIndex 1 Note: when configuring an Advanced Configuration parameter, the user must enter the index of the MUM, see above table, that corresponds with the IP address of the remote SNMP agent.
1.3.6.1.4.1.8059.1.1.1.1.1.1.6.1.1.1INTEGER (1..2)read-onlycurrent
advCfgTFTPState
OBJECT-TYPE
This configuration parameter allows the user the ability to disable, or enable, the TFTP server. By default, this object should have the value enabled(1).
1.3.6.1.4.1.8059.1.1.1.1.1.1.6.1.1.2INTEGER {enabled(1), disabled(2)}read-writecurrent
advCfgTelnetState
OBJECT-TYPE
This configuration parameter allows the user the ability to disable, or enable, telnet. By default, this object should have the value enabled(1).
1.3.6.1.4.1.8059.1.1.1.1.1.1.6.1.1.3INTEGER {enabled(1), disabled(2)}read-writecurrent
advCfgMgmtFltrIpStart
OBJECT-TYPE
The start value for the management IP filter range. This parameter is initially set to a default filter range of 0.0.0.0 - 255.255.255.255. Connection to the management system will be allowed only if the user's Ip address value falls within the defined mumCfgMgmtIpStart and mumCfgMgmtIpEnd range.
1.3.6.1.4.1.8059.1.1.1.1.1.1.6.1.1.4IpAddressread-writecurrent
advCfgMgmtFltrIpEnd
OBJECT-TYPE
The end value for the management IP filter range. This parameter is initially set to a default filter range of 0.0.0.0 - 255.255.255.255. Connection to the management system will be allowed only if the user's Ip address value falls within the defined mumCfgMgmtIpStart and mumCfgMgmtIpEnd range.
1.3.6.1.4.1.8059.1.1.1.1.1.1.6.1.1.5IpAddressread-writecurrent
advCfgMgmtSessionTimeout
OBJECT-TYPE
This value defines the length of a password session in seconds. If the session has been idle for a time greater than this value, the browser will be challenged again, even if it has provided authentication credentials with the request.
1.3.6.1.4.1.8059.1.1.1.1.1.1.6.1.1.6NtnTimeTicksread-writecurrent
mumCfgManagementPort
OBJECT-IDENTITY
1.3.6.1.4.1.8059.1.1.1.1.1.1.7
mgmtPortCfgTable
OBJECT-TYPE
A list of the hardware platform management port entries.
1.3.6.1.4.1.8059.1.1.1.1.1.1.7.1not-accessiblecurrent
mgmtPortCfgEntry
OBJECT-TYPE
An entry containing information applicable to the managment (ethernet type) port.
1.3.6.1.4.1.8059.1.1.1.1.1.1.7.1.1not-accessiblecurrent
mgmtPortCfgMumIndex
OBJECT-TYPE
Translates to the physical slot number that a MUM200-2/2000-2 module exists within a chassis. The Mini/Micro DSLAMs' physical location is set to 1 by default. See below, chassis type physical location(s) translation ------------ -------------------------------- IPD12000 MUM in slots 13,14 = uimCfgEthMumIndex 1,2 respecitively IPD4000 MUM in slot 5 = uimCfgEthMumIndex 1 Mini DSLAM NA = uimCfgEthMumIndex 1 Micro DSLAM NA = uimCfgEthMumIndex 1 Note: when configuring a management port, the user must enter the index of the MUM, see above table, that corresponds with the IP address of the remote SNMP agent.
1.3.6.1.4.1.8059.1.1.1.1.1.1.7.1.1.1INTEGER (1..2)read-onlycurrent
mgmtPortCfgRxTxRate
OBJECT-TYPE
Set the RxTx rate for an ethernet management port.
1.3.6.1.4.1.8059.1.1.1.1.1.1.7.1.1.2INTEGER {uimEthAutoNegotiate(0), uimEth10(1), uimEth100(2), uimEthGig(3)}read-writecurrent
mgmtPortCfgDuplex
OBJECT-TYPE
Set the duplex setting for an ethernet management port.
1.3.6.1.4.1.8059.1.1.1.1.1.1.7.1.1.3INTEGER {uimEthAutoNegotiate(0), uimEthHalf(1), uimEthFull(2)}read-writecurrent
mgmtPortCfgType
OBJECT-TYPE
Set the management port type as follows. By setting this port to mgmt(1), it will operate as a non-bridge mode connection. Setting it to uplink(2), this port will operate like an uplink interface module, i.e. a bridge mode connection. Note: this applies to the AuD8000-12 micro DSLAM only.
1.3.6.1.4.1.8059.1.1.1.1.1.1.7.1.1.4INTEGER {mgmt(1), uplink(2)}read-writecurrent