NTN-QOS-POLICY-AUX-MIB
- Registered at
- 1.3.6.1.4.1.45.4.5
- Last updated
- 2004-07-20 00:00
- Organization
- Nortel Networks, Inc.
- Revisions
- 2004-07-20 00:00
- Namespace
- nortel
- Source file
NTN-QOS-POLICY-AUX-MIB- Digest
sha256:678a355052d238d43e2af7fe18e7f522f81cd16520795cc488ad917681ecde67
Description
This module defines an infrastructure used for support of policy-based traffic processing in a network device.
Contact
Editor: John Seligson Nortel Networks, Inc. Postal: 4401 Great America Parkway Santa Clara, CA USA 95054 Tel: +1 408 495-2992 E-mail: jseligso@nortelnetworks.com
Imports
| From | Symbols |
|---|---|
| IF-MIB | InterfaceIndex |
| NTN-QOS-POLICY-EXT-PIB | ntnQosIfParametersExt |
| POLICY-FRAMEWORK-PIB | PolicyInstanceId, RoleCombination |
| QOS-POLICY-IP-PIB | qosTargetEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Counter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, RowStatus, StorageType, TEXTUAL-CONVENTION, TruthValue |
| SYNOPTICS-ROOT-MIB | policy |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB IF-MIB NTN-QOS-POLICY-AUX-MIB NTN-QOS-POLICY-EXT-PIB POLICY-FRAMEWORK-PIB QOS-POLICY-802-PIB QOS-POLICY-IP-PIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC SYNOPTICS-ROOT-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ntnQosInterfaceIdTable OBJECT-TYPE Contains interface index to interface role combination associations. | 1.3.6.1.4.1.45.4.4.1.1.4 | not-accessible | current | |
| ntnQosInterfaceIdEntry OBJECT-TYPE A conceptual row in the ntnQosInterfaceIdTable. Each row identifies an interface value that corresponds to an entry in the ifTable (MIB-II) and a role combination taglist with which the interface is associated. | 1.3.6.1.4.1.45.4.4.1.1.4.1 | not-accessible | current | |
| ntnQosInterfaceIdIfIndex OBJECT-TYPE The ifIndex value that is associated with this instance of the ntnQosInterfaceIdEntry. The ifIndex value of this attribute must correspond to the ifTable entry with the same ifIndex value. | 1.3.6.1.4.1.45.4.4.1.1.4.1.1 | InterfaceIndex | not-accessible | current |
| ntnQosInterfaceIdRoleCombination OBJECT-TYPE The role combination that is associated with the interface with an ifIndex value that is equal to ntnQosInterfaceIdIfIndex. | 1.3.6.1.4.1.45.4.4.1.1.4.1.2 | RoleCombination | read-create | current |
| ntnQosInterfaceIdStorageType OBJECT-TYPE The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if the associated ntnQosInterfaceIdStatus object is equal to active(1). | 1.3.6.1.4.1.45.4.4.1.1.4.1.3 | StorageType | read-create | current |
| ntnQosInterfaceIdStatus OBJECT-TYPE The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported. | 1.3.6.1.4.1.45.4.4.1.1.4.1.4 | RowStatus | read-create | current |
| ntnQosInterfaceIdQueueSet OBJECT-TYPE The queue set associated with this interface. A queue set must be defined in the qosInterfaceQueueTable prior to being referenced by this attribute. | 1.3.6.1.4.1.45.4.4.1.1.4.1.5 | PolicyInstanceId | read-create | current |
| ntnQosPolicyAuxObjects OBJECT-IDENTITY | 1.3.6.1.4.1.45.4.5.1 | |||
| ntnQosConfig OBJECT-IDENTITY | 1.3.6.1.4.1.45.4.5.1.1 | |||
| ntnQosConfigDynamicMgmt OBJECT-TYPE Specifies whether dynamic management (e.g., COPS-PR) is currently enabled. Devices may limit support for dynamic management by providing read-only access to this object. If enabled, dynamic management always takes precedence over static management such that static management may only be used for monitoring of objects that have a POLICY-ACCESS clause of 'install' or 'install-notify' in the respective PIB module. Disabling dynamic management causes Delete Request State (DRQ) and Client Close (CC) messages to be generated if a connection between the PEP and a PDP is currently established. Installed policies are not automatically deleted. Enabling dynamic management will initiate the COPS-PR connect sequence and, potentailly, the loading of policy information. | 1.3.6.1.4.1.45.4.5.1.1.1 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| ntnQosConfigQpaState OBJECT-TYPE The state of the QoS Policy Agent (QPA). A state of 'running(1)' indicates that the QPA is in a stable state and can process messages. A state of 'initializing(2)' indicates that the agent is currently unable to process messages. Either 'running(1)' or 'initializing(2)' will be returned when querying this object. These values can not be set. All installed state can be deleted and reset to the device's default state by setting the value of this object to 'resetToDefault(3)'. This is the only value that will be accepted when setting this object. The 'resetToDefault(3)' value will never be returned in response to a query. | 1.3.6.1.4.1.45.4.5.1.1.2 | INTEGER {running(1), initializing(2), resetToDefault(3)} | read-write | current |
| ntnQosConfigQpaRetryTimer OBJECT-TYPE The number of seconds between the receipt of a connection termination/rejection indication and the initiation of a new connection request. A value of -1 indicates that a connection retry should not be attempted after a failed attempt. | 1.3.6.1.4.1.45.4.5.1.1.3 | Integer32 (-1 | 1..86400) | read-write | current |
| ntnQosConfigAllowPacketReordering OBJECT-TYPE Support for certain Per-Hop-Behaviors (PHBs) requires that packets within a flow not be reordered upon transmission. Packet reordering may not be an issue for other PHBs. Setting this object to 'true(1)' allows full flexibility in terms of the egress queue to which a packet is assigned. A value of 'false(2)' causes the agent to verify that in-profile and out-of-profile actions associated with a flow will not cause packets from the same flow to be assigned to different egress queues. | 1.3.6.1.4.1.45.4.5.1.1.4 | TruthValue | read-write | current |
| ntnQosConfigMaintainPolicingStats OBJECT-TYPE Policing statistics, such as in-profile and out-of-profile octets, are often an important mechanism for evaluating the effectiveness of installed policies. In order to track these statistics, additional system resources are consumed meaning that the amount of filters available for classification purposes is limited. Setting this object to 'true(1)' causes statistics to be tracked by default for all metered policies defined after this attribute is set. A value of 'false(2)' means that new metered policies will not track statistics. Note that this attribute specifies the default behavior. Statistics maintenance may be enabled and disabled on a per policy basis via an attribute in the ntnQosTargetStatsTable. If a value for that attribute is not provided, the value of this object determines the behavior. | 1.3.6.1.4.1.45.4.5.1.1.5 | TruthValue | read-write | current |
| ntnQosConfigIfcClassRestrictions OBJECT-TYPE Specifies which interface class types can be defined by the user. Default filters are installed to support the different interface classes. Limiting the classes that can be used reduces, or eliminates entirely, the default filter resources that must be consumed, making these resources available for administrator use. Modifications to this attribute require a system initialization before they take effect. | 1.3.6.1.4.1.45.4.5.1.1.6 | INTEGER {unrestrictedOnly(1), unrestrictedAndTrusted(2), allowAllIfcClasses(3)} | read-write | current |
| ntnQosConfigDefaultOutOfProfileAction OBJECT-TYPE This attribute identifies the action that is to be initiated for flows that are determined to be out-of-profile and are being metered using the 'committedRestricted' type of meter. Actions must be defined in the qosActionTable prior to being referenced by this attribute. The value of this attribute may not be changed while meters of this type are currently associated with a policy. | 1.3.6.1.4.1.45.4.5.1.1.7 | PolicyInstanceId | read-write | current |
| ntnQosConfigPolicyCfgRestrictionMode OBJECT-TYPE Specifies whether policies referencing IP filter criteria can be defined by the user. The value of this attribute determines if new IP filter-based policies can be installed. If the value of this attribute is 'noPolicyRestrictions(1)', both IP and Layer 2-based policies can be installed. If the value is 'l3PolicyRestrictions(2)', only Layer 2-based policies can be installed. This attribute is only consulted when traffic separation mode is enabled. Modification of this attribute may be restricted based on the interface used (e.g., CLI) for the modification. | 1.3.6.1.4.1.45.4.5.1.1.8 | INTEGER {noPolicyRestrictions(1), l3PolicyRestrictions(2)} | read-write | current |
| ntnQosStatistics OBJECT-IDENTITY | 1.3.6.1.4.1.45.4.5.1.2 | |||
| ntnQosTargetStatsTable OBJECT-TYPE Contains items that supplement the target group data that is specified in the qosTargetTable. | 1.3.6.1.4.1.45.4.5.1.2.1 | not-accessible | current | |
| ntnQosTargetStatsEntry OBJECT-TYPE A conceptual row in the ntnQosTargetStatsTable. Each row contains statistics related to the associated qosTargetTable entry. Entries will be automatically deleted from this table should the corresponding qosTargetTable entry be destroyed. | 1.3.6.1.4.1.45.4.5.1.2.1.1 | not-accessible | current | |
| ntnQosTargetStatsPktHits OBJECT-TYPE This object tracks the packet hits of this target group specification. Packet hits are defined as packets that are selected for additional processing based on target data specified in the associated qosTargetTable entry. | 1.3.6.1.4.1.45.4.5.1.2.1.1.1 | Counter32 | read-only | current |
| ntnQosTargetStatsOverflowPktHits OBJECT-TYPE The number of times the associated ntnQosTargetStatsPktHits counter has overflowed. | 1.3.6.1.4.1.45.4.5.1.2.1.1.2 | Counter32 | read-only | current |
| ntnQosTargetStatsHCPktHits OBJECT-TYPE This object tracks the packet hits of this target group specification. Packet hits are defined as packets that are selected for additional processing based on target data specified in the associated qosTargetTable entry. | 1.3.6.1.4.1.45.4.5.1.2.1.1.3 | Counter64 | read-only | current |
| ntnQosTargetStatsTotalOctets OBJECT-TYPE This object tracks the total number of octets associated with packet hits of this target group specification. | 1.3.6.1.4.1.45.4.5.1.2.1.1.4 | Counter32 | read-only | current |
| ntnQosTargetStatsTotalOverflowOctets OBJECT-TYPE The number of times the associated ntnQosTargetStatsTotalOctets counter has overflowed. | 1.3.6.1.4.1.45.4.5.1.2.1.1.5 | Counter32 | read-only | current |
| ntnQosTargetStatsTotalHCOctets OBJECT-TYPE This object tracks the total number of octets associated with packet hits of this target group specification. | 1.3.6.1.4.1.45.4.5.1.2.1.1.6 | Counter64 | read-only | current |
| ntnQosTargetStatsInProfOctets OBJECT-TYPE This object tracks the total number of octets associated with packets considered to be in-profile based on the metering specification associated with this target group entry. | 1.3.6.1.4.1.45.4.5.1.2.1.1.7 | Counter32 | read-only | current |
| ntnQosTargetStatsInProfOverflowOctets OBJECT-TYPE The number of times the associated ntnQosTargetStatsInProfOctets counter has overflowed. | 1.3.6.1.4.1.45.4.5.1.2.1.1.8 | Counter32 | read-only | current |
| ntnQosTargetStatsInProfHCOctets OBJECT-TYPE This object tracks the total number of octets associated with packets considered to be in-profile based on the metering specification associated with this target group entry. | 1.3.6.1.4.1.45.4.5.1.2.1.1.9 | Counter64 | read-only | current |
| ntnQosTargetStatsOutProfOctets OBJECT-TYPE This object tracks the total number of octets associated with packets considered to be out-of- profile based on the metering specification associated with this target group entry. | 1.3.6.1.4.1.45.4.5.1.2.1.1.10 | Counter32 | read-only | current |
| ntnQosTargetStatsOutProfOverflowOctets OBJECT-TYPE The number of times the associated ntnQosTargetStatsOutProfOctets counter has overflowed. | 1.3.6.1.4.1.45.4.5.1.2.1.1.11 | Counter32 | read-only | current |
| ntnQosTargetStatsOutProfHCOctets OBJECT-TYPE This object tracks the total number of octets associated with packets considered to be out-of- profile based on the metering specification associated with this target group entry. | 1.3.6.1.4.1.45.4.5.1.2.1.1.12 | Counter64 | read-only | current |
| ntnQosTargetStatsTrackStatistics OBJECT-TYPE Policing statistics, such as in-profile and out-of-profile octets, are often an important mechanism for evaluating the effectiveness of installed policies. In order to track these statistics, additional system resources are consumed meaning that the amount of filters available for classification purposes is limited. Setting this object to 'true(1)' causes statistics to be tracked for the metered policy being defined. A value of 'false(2)' means that the metered policy will not track statistics. | 1.3.6.1.4.1.45.4.5.1.2.1.1.13 | TruthValue | read-write | current |
| ntnQosTargetStatsShapingQDrops OBJECT-TYPE This object counts the number of packets dropped due to insufficient shaping resources. Traffic that is being shaped prior to transmission may need to be buffered temporarily to ensure conformance to the associated shaping specification. Shaping buffer resources are limited. If shaping buffer resources are exhausted, traffic that is to be shaped will be dropped, causing this counter to be incremented once per dropped packet, until resources become available. | 1.3.6.1.4.1.45.4.5.1.2.1.1.14 | Counter32 | read-only | current |
| ntnQosTargetStatsOverflowShapingQDrops OBJECT-TYPE The number of times the associated ntnQosTargetStatsShapingQDrops counter has overflowed. | 1.3.6.1.4.1.45.4.5.1.2.1.1.15 | Counter32 | read-only | current |
| ntnQosTargetStatsHCShapingQDrops OBJECT-TYPE This object counts the number of packets dropped due to insufficient shaping resources. Traffic that is being shaped prior to transmission may need to be buffered temporarily to ensure conformance to the associated shaping specification. Shaping buffer resources are limited. If shaping buffer resources are exhausted, traffic that is to be shaped will be dropped, causing this counter to be incremented once per dropped packet, until resources become available. | 1.3.6.1.4.1.45.4.5.1.2.1.1.16 | Counter64 | read-only | current |
| ntnQosPolicyAuxConformance OBJECT-IDENTITY | 1.3.6.1.4.1.45.4.5.2 | |||
| ntnQosCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.45.4.5.2.1 | |||
| ntnQosGroups OBJECT-IDENTITY | 1.3.6.1.4.1.45.4.5.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| ntnQosCompliance MODULE-COMPLIANCE Describes the requirements for conformance to the Nortel Networks QoS Policy MIB. | 1.3.6.1.4.1.45.4.5.2.1.1 | current |
| ntnQosConfigGroup OBJECT-GROUP Objects used to configure QoS Policy Agent operation. | 1.3.6.1.4.1.45.4.5.2.2.1 | current |
| ntnQosInterfaceIdGroup OBJECT-GROUP Objects used to define interface (ifIndex) to interface role combination mappings. | 1.3.6.1.4.1.45.4.5.2.2.2 | current |
| ntnQosTargetStatsGroup OBJECT-GROUP Objects that supplement the qosTargetTable providing per target statistics. | 1.3.6.1.4.1.45.4.5.2.2.3 | current |