MIBs Depot

NSCRTV-ROOT

Registered at
1.3.6.1.4.1.17409
Namespace
nscrtv
Source file
NSCRTV-ROOT
Digest
sha256:32ee7ce0e36ef3531aeccc9dd7cf1ca0606419ad5667997fa0348a64ae331f37

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

NSCRTV-ROOT
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
nscrtvRoot
OBJECT-IDENTITY
1.3.6.1.4.1.17409
nscrtvHFCemsTree
OBJECT-IDENTITY
1.3.6.1.4.1.17409.1
propertyIdent
OBJECT-IDENTITY
1.3.6.1.4.1.17409.1.1
analogPropertyTable
OBJECT-TYPE
Attribute Table simulation parameters
1.3.6.1.4.1.17409.1.1.1not-accessiblemandatory
analogPropertyEntry
OBJECT-TYPE
Attribute Table simulation parameters head. OID purpose as a table index,Its coding method is'length��OID'��OID former two members'1.3'According to '1'and'3'respectively coding,Instead of ordinary OID encoding (0x2B).
1.3.6.1.4.1.17409.1.1.1.1not-accessiblemandatory
analogParameterOID
OBJECT-TYPE
index
1.3.6.1.4.1.17409.1.1.1.1.1OBJECT IDENTIFIERread-onlymandatory
alarmEnable
OBJECT-TYPE
Alarm enable control byte, the corresponding position for the'1 'that allow alarm,'0' a ban warning Bit 0: Alarm enable low Bit 1: Alarm enable low Bit 2: Alarm enable high Bit 3: Alarm enable high Bit 4 ~ 7 reservations should be 0 This object should be stored in nonvolatile memory.
1.3.6.1.4.1.17409.1.1.1.1.2OCTET STRING (SIZE(1))read-writemandatory
analogAlarmState
OBJECT-TYPE
The parameters of the current state of alarm.
1.3.6.1.4.1.17409.1.1.1.1.3INTEGER {aasNominal(1), aasHIHI(2), aasHI(3), aasLO(4), aasLOLO(5)}read-onlymandatory
analogAlarmHIHI
OBJECT-TYPE
Alarm HIHI high threshold value. This object should be stored in non-volatile memory.
1.3.6.1.4.1.17409.1.1.1.1.4INTEGERread-writemandatory
analogAlarmHI
OBJECT-TYPE
HI high alarm threshold value. This object should be stored in non-volatile memory.
1.3.6.1.4.1.17409.1.1.1.1.5INTEGERread-writemandatory
analogAlarmLO
OBJECT-TYPE
LO low alarm threshold value. This object should be stored in non-volatile memory.
1.3.6.1.4.1.17409.1.1.1.1.6INTEGERread-writemandatory
analogAlarmLOLO
OBJECT-TYPE
Alarm LOLO very low threshold value. This object should be stored in non-volatile memory.
1.3.6.1.4.1.17409.1.1.1.1.7INTEGERread-writemandatory
analogAlarmDeadband
OBJECT-TYPE
Dead-alarm threshold value. After the warning, parameter values should be restored to the alarm threshold and alarm threshold and the difference between the absolute value greater than the value of dead zone, the alarm can be removed. This object should be stored in nonvolatile memory.
1.3.6.1.4.1.17409.1.1.1.1.8INTEGERread-writemandatory
discretePropertyTable
OBJECT-TYPE
Discrete Attribute Table.
1.3.6.1.4.1.17409.1.1.2not-accessiblemandatory
discretePropertyEntry
OBJECT-TYPE
Attribute Table discrete head. OID coding methods with simulation attribute table
1.3.6.1.4.1.17409.1.1.2.1not-accessiblemandatory
discreteParameterOID
OBJECT-TYPE
Attribute Table discrete index 1: Parameters OID.
1.3.6.1.4.1.17409.1.1.2.1.1OBJECT IDENTIFIERread-onlymandatory
discreteAlarmValue
OBJECT-TYPE
Attribute Table discrete index 2: parameter values. When the equipment value of this parameter values, and so will be dealt with a warning.
1.3.6.1.4.1.17409.1.1.2.1.2INTEGERread-onlymandatory
discreteAlarmEnable
OBJECT-TYPE
When the alarm so that it can open the (2 or 3), this parameter allows for alarm processing. If the alarm so that it can shut down (1), alarm processing will be carried out. This object default values for the disable (1). This object should be stored in non-volatile memory.
1.3.6.1.4.1.17409.1.1.2.1.3INTEGER {disable(1), enableMajor(2), enableMinor(3)}read-writemandatory
discreteAlarmState
OBJECT-TYPE
The parameters of the current state of alarm.
1.3.6.1.4.1.17409.1.1.2.1.4INTEGER {dasNominal(1), dasDiscreteMajor(6), dasDiscreteMinor(7)}read-onlymandatory
currentAlarmTable
OBJECT-TYPE
The current warning Table.
1.3.6.1.4.1.17409.1.1.3not-accessiblemandatory
currentAlarmEntry
OBJECT-TYPE
The current warning Table Head. OID coding methods with simulation attribute table.
1.3.6.1.4.1.17409.1.1.3.1not-accessiblemandatory
currentAlarmOID
OBJECT-TYPE
NE, currently in a state of alarm parameters OID Index, and attribute the alarm in the table corresponding parameters OID.
1.3.6.1.4.1.17409.1.1.3.1.1OBJECT IDENTIFIERread-onlymandatory
currentAlarmState
OBJECT-TYPE
Warning parameters of the current state of alarm.
1.3.6.1.4.1.17409.1.1.3.1.2INTEGER {caasHIHI(2), caasHI(3), caasLO(4), caasLOLO(5), caasDiscreteMajor(6), caasDiscreteMinor(7)}read-onlymandatory
currentAlarmValue
OBJECT-TYPE
Alarm parameter's value.
1.3.6.1.4.1.17409.1.1.3.1.3INTEGERread-onlymandatory
alarmsIdent
OBJECT-IDENTITY
1.3.6.1.4.1.17409.1.2
alarmLogNumberOfEntries
OBJECT-TYPE
Alarm record number of records in the table.
1.3.6.1.4.1.17409.1.2.1INTEGERread-onlymandatory
alarmLogLastIndex
OBJECT-TYPE
Recently a warning the index of the records.
1.3.6.1.4.1.17409.1.2.2INTEGERread-onlymandatory
alarmLogTable
OBJECT-TYPE
Alarm record form, at least support 16 record. Each table in the registration of a new record, the management agent (transponder) managers should send traps news.
1.3.6.1.4.1.17409.1.2.3not-accessiblemandatory
alarmLogEntry
OBJECT-TYPE
Alarm Sheet Head.
1.3.6.1.4.1.17409.1.2.3.1not-accessiblemandatory
alarmLogIndex
OBJECT-TYPE
The only logo Alarm Index recorded a record in the table, the index value increased from 1 start of each new record, plus 1 until 32,767, a record index of the re-starts at 1. Acting under the management of storage capacity can be the first choice to delete those records, the specific details in this not to achieve provisions.
1.3.6.1.4.1.17409.1.2.3.1.1INTEGER (1..32767)read-onlymandatory
alarmLogInformation
OBJECT-TYPE
Alarm record information, multi-byte strings, defined as follows: Byte 1 ~ 4: Alarm in time (POSIX format, the previous maximum byte) Byte 5: Alarm types (enumeration, definitions see behind) Byte 6: Alarm value after commonNeStatus Byte 7 ~ m: Alarm parameters object identifier (Basic Encoding Rules (ASN.1)) Byte n ~ z: Alarm parameter values (Basic Encoding Rules (ASN.1)) Alarm enumerated types: 1 NOMINAL 2 HIHI 3 HI 4 LO 5 LOLO 6 Discrete Major 7 Discrete Minor
1.3.6.1.4.1.17409.1.2.3.1.2OCTET STRING (SIZE(17..255))read-onlymandatory
alarmText
OBJECT-TYPE
This trap targets for the needs of information contained in a text field transponder information is achievable. The field contains the text of the object depends on the definition of alarm parameters, it is uncertain, This object can not access provisions.
1.3.6.1.4.1.17409.1.2.4DisplayStringnot-accessibleoptional
commonIdent
OBJECT-IDENTITY
1.3.6.1.4.1.17409.1.3
commonAdminGroup
OBJECT-IDENTITY
1.3.6.1.4.1.17409.1.3.1
commonNELogicalID
OBJECT-TYPE
The logic of the designated NE identifier (LogicID), the values and attributes of other unrelated NE. This target value should be stored in non-volatile memory.
1.3.6.1.4.1.17409.1.3.1.1OCTET STRING (SIZE(0..40))read-writemandatory
commonNEVendor
OBJECT-TYPE
NE equipment manufacturers.
1.3.6.1.4.1.17409.1.3.1.2DisplayString (SIZE(0..255))read-onlymandatory
commonNEModelNumber
OBJECT-TYPE
NE equipment models.
1.3.6.1.4.1.17409.1.3.1.3DisplayString (SIZE(0..255))read-onlymandatory
commonNESerialNumber
OBJECT-TYPE
NE equipment serial numbers.
1.3.6.1.4.1.17409.1.3.1.4DisplayString (SIZE(0..255))read-onlymandatory
commonNEVendorInfo
OBJECT-TYPE
NE equipment suppliers other special designated information.
1.3.6.1.4.1.17409.1.3.1.5DisplayString (SIZE(0..255))read-onlyoptional
commonNEStatus
OBJECT-TYPE
With 7.5.4 STATRESP PDU parameters in the corresponding Status Bit 0: CHNLRQST Bit 1: CNTNRM Bit 2: CNTCUR Bit 3: MAJOR ALARMS Bit 4: MINOR ALARMS Bit 5: RSVD1 Bit 6: RSVD2 Bit 7: RSVD3
1.3.6.1.4.1.17409.1.3.1.6OCTET STRING (SIZE(1))read-onlymandatory
commonReset
OBJECT-TYPE
Write'1 'will be reset NE equipment, the value will be included in other non-functional. Reading this object return value'1 ', had no effect on equipment.
1.3.6.1.4.1.17409.1.3.1.7INTEGER {reset(1)}read-writemandatory
commonAlarmDetectionControl
OBJECT-TYPE
This object used to control the Alarm Detection NE.
1.3.6.1.4.1.17409.1.3.1.8INTEGER {detectionDisabled(1), detectionEnabled(2), detectionEnabledAndRegenerate(3)}read-writemandatory
commonNetworkAddress
OBJECT-TYPE
NE network IP address, NE produce Trap should include this address. This value should be stored in nonvolatile memory. This value can be registered through the MAC order or through local vendors to set up Interface.
1.3.6.1.4.1.17409.1.3.1.9IpAddressread-onlymandatory
commonCheckCode
OBJECT-TYPE
This target for the detection transponder code configuration of the report. The calculation includes detection code transponder (including management equipment) and the physical configuration parameters stored in non-volatile memory of all the parameters. The detection algorithm calculated by the vendor code provisions. The object should be kept in the value of non-volatile memory, the response thinks highly activated, will be recalculated and re-testing code and the value prior to the commencement of comparison to determine whether or should haveһ��hfcColdStart hfcWarmStart traps. When write this object (SetRequest), the detection code will be recalculated and fill the SetRequest in response to the GetResponse. At this time, will not produce or hfcWarmStart traps hfcColdStart.
1.3.6.1.4.1.17409.1.3.1.10INTEGERread-writemandatory
commonTrapCommunityString
OBJECT-TYPE
Definition of Community Trap string. The default value is' public '. The value of this object should be stored in non-volatile memory.
1.3.6.1.4.1.17409.1.3.1.11OCTET STRING (SIZE(0..64))read-writemandatory
commonTamperStatus
OBJECT-TYPE
The safety report NE switching equipment (such as whether to open up the lid) state that this object is called discrete attributes of a corresponding entry in the table. Intact that normal, expressed alarm compromised.
1.3.6.1.4.1.17409.1.3.1.12INTEGER {intact(1), compromised(2)}read-onlyoptional
commonInternalTemperature
OBJECT-TYPE
NE equipment Room (machine) temperature, units degrees Celsius. This request object attribute in a corresponding entry in the table.
1.3.6.1.4.1.17409.1.3.1.13INTEGER (-128..127)read-onlyoptional
commonTime
OBJECT-TYPE
NE of the POSIX said that the current time (since at 0:00 on January 1, 1970 since the seconds).
1.3.6.1.4.1.17409.1.3.1.14INTEGERread-writeoptional
commonVarBindings
OBJECT-TYPE
This object can be said to receive SNMP information NE variables bundled the largest number of tables. Value: 0 indicated no restrictions on the maximum number bundled.
1.3.6.1.4.1.17409.1.3.1.15INTEGERread-onlymandatory
commonResetCause
OBJECT-TYPE
NE said the reasons for the recent reduction.
1.3.6.1.4.1.17409.1.3.1.16INTEGER {other(1), powerup(2), command(3), watchdog(4), craft(5)}read-onlymandatory
commonCraftStatus
OBJECT-TYPE
NE local object that this interface (such as RS232 or RS485 interface) state. NE does not necessarily have to support the local interface. NE local interface without affecting the state of its MAC interface functions; If we do not support the local interface, and its value is disconnected.
1.3.6.1.4.1.17409.1.3.1.17INTEGER {disconnected(1), connected(2)}read-onlymandatory
commonDeviceOID
OBJECT-TYPE
This OID object as a pointer, the equipment was used at MIB (such as Node, two-way amplifier, etc).
1.3.6.1.4.1.17409.1.3.1.18OBJECT IDENTIFIERread-onlyoptional
commonDeviceId
OBJECT-TYPE
The contents of this object by the designated by the equipment vendors, manufacturers and products it contains special ASCII text messages.
1.3.6.1.4.1.17409.1.3.1.19OCTET STRING (SIZE(32))read-onlyoptional
commondownload
OBJECT-TYPE
1.3.6.1.4.1.17409.1.3.1.20INTEGER {reset(1)}read-writemandatory
commonAdminUseRf
OBJECT-IDENTITY
1.3.6.1.4.1.17409.1.3.2
commonMACGroup
OBJECT-IDENTITY
1.3.6.1.4.1.17409.1.3.2.1
commonMacAddress
OBJECT-IDENTITY
1.3.6.1.4.1.17409.1.3.2.1.1
commonPhysAddress
OBJECT-TYPE
NE MAC (physical) address.
1.3.6.1.4.1.17409.1.3.2.1.1.1OCTET STRINGread-onlymandatory
commonMaxMulticastAddresses
OBJECT-TYPE
NE equipment to support the greatest number of multicast addresses.
1.3.6.1.4.1.17409.1.3.2.1.1.2INTEGER (4..255)read-onlymandatory
commonMulticastAddressTable
OBJECT-TYPE
Multicast addresses Table, the value of this object should be stored in nonvolatile memory.
1.3.6.1.4.1.17409.1.3.2.1.1.3not-accessiblemandatory
commonMulticastAddressEntry
OBJECT-TYPE
Multicast addresses Table Head.
1.3.6.1.4.1.17409.1.3.2.1.1.3.1not-accessiblemandatory
commonMulticastAddressIndex
OBJECT-TYPE
Multicast addresses Index.
1.3.6.1.4.1.17409.1.3.2.1.1.3.1.1INTEGER (1..255)read-onlymandatory
commonMulticastAddressNumber
OBJECT-TYPE
Multicast addresses,I/Gbit
1.3.6.1.4.1.17409.1.3.2.1.1.3.1.2OCTET STRING (SIZE(6))read-writemandatory
commonBackoffParams
OBJECT-IDENTITY
1.3.6.1.4.1.17409.1.3.2.1.2
commonBackoffPeriod
OBJECT-TYPE
Backoff algorithm benchmark time (ms), initialize the default value of 6 ms. The value of this object should be stored in non-volatile memory.
1.3.6.1.4.1.17409.1.3.2.1.2.1INTEGER (0..16383)read-writemandatory
commonACKTimeoutWindow
OBJECT-TYPE
NE awaiting HE overtime to send ACK response time (ms), initialize the default value is 19 ms. The value of this object should be stored in non-volatile memory.
1.3.6.1.4.1.17409.1.3.2.1.2.2INTEGER (0..255)read-writemandatory
commonMaximumMACLayerRetries
OBJECT-TYPE
NE data packets sent the greatest number of re-examination. Initialize the default value is 16. The value of this object should be stored in non-volatile memory.
1.3.6.1.4.1.17409.1.3.2.1.2.3INTEGER (0..255)read-writemandatory
commonMaxPayloadSize
OBJECT-TYPE
From top to bottom line channel packet supported by the largest payload (payload) the length of.
1.3.6.1.4.1.17409.1.3.2.1.2.4INTEGERread-onlymandatory
commonBackoffMinimumExponent
OBJECT-TYPE
The standards body of the MAC layer specification definition of the smallest backoff algorithm index value, default values for 6. This value may not exceed commonBackoffMaximumValue value. The value of this object should be stored in non-volatile memory.
1.3.6.1.4.1.17409.1.3.2.1.2.5INTEGER (0..15)read-writemandatory
commonBackoffMaximumExponent
OBJECT-TYPE
The body of the MAC layer standard definition of backoff algorithm for standardizing the largest index value, the default value is 15. This value shall be not less than commonBackoffMinimum value. The value of this object should be stored in non-volatile memory.
1.3.6.1.4.1.17409.1.3.2.1.2.6INTEGER (0..15)read-writemandatory
commonMacStats
OBJECT-IDENTITY
1.3.6.1.4.1.17409.1.3.2.1.3
commonForwardPathLOSEvents
OBJECT-TYPE
LOS downlink channel in the number of reset to 0.
1.3.6.1.4.1.17409.1.3.2.1.3.1Counterread-writeoptional
commonForwardPathFramingErrors
OBJECT-TYPE
Downlink Channel frames wrong number reset to 0.
1.3.6.1.4.1.17409.1.3.2.1.3.2Counterread-writeoptional
commonForwardPathCRCErrors
OBJECT-TYPE
CRC errors down the number of reset to 0.
1.3.6.1.4.1.17409.1.3.2.1.3.3Counterread-writeoptional
commonInvalidMacCmds
OBJECT-TYPE
Invalid MAC layer order wrong number reset to 0.
1.3.6.1.4.1.17409.1.3.2.1.3.4Counterread-writeoptional
commonBackwardPathCollisionTimes
OBJECT-TYPE
Uplink Packet collision frequency, reset to 0.
1.3.6.1.4.1.17409.1.3.2.1.3.5Counterread-writeoptional
commonRfGroup
OBJECT-IDENTITY
1.3.6.1.4.1.17409.1.3.2.2
commonReturnPathFrequency
OBJECT-TYPE
Channel uplink frequency units Hz. The value of this object should be stored in non-volatile memory.
1.3.6.1.4.1.17409.1.3.2.2.1INTEGER (0..1000000000)read-onlymandatory
commonForwardPathFrequency
OBJECT-TYPE
Downlink frequency channel, flat Hz. The value of this object should be stored in non-volatile memory.
1.3.6.1.4.1.17409.1.3.2.2.2INTEGER (0..1000000000)read-onlymandatory
commonProvisionedReturnPowerLevel
OBJECT-TYPE
Upstream channel power levels and units for dBuV. When the internal use of this value will be rounded to the nearest support value. Reading return to this subject when the actual value rather than rounding value. The value of this object should be stored in non-volatile memory.
1.3.6.1.4.1.17409.1.3.2.2.3INTEGER (0..127)read-writemandatory
commonForwardPathReceiveLevel
OBJECT-TYPE
Downlink Channel receive power levels, units dBuV.
1.3.6.1.4.1.17409.1.3.2.2.4INTEGER (0..127)read-onlyoptional
commonMaxReturnPower
OBJECT-TYPE
The largest upstream channel power levels and units for dBuV. The value of this object should be stored in non-volatile memory.
1.3.6.1.4.1.17409.1.3.2.2.5INTEGER (0..127)read-writemandatory
commonAdminUseEthernet
OBJECT-IDENTITY
1.3.6.1.4.1.17409.1.3.3
commonAgentGroup
OBJECT-IDENTITY
1.3.6.1.4.1.17409.1.3.3.1
commonAgentBootWay
OBJECT-TYPE
Starting Method Acting
1.3.6.1.4.1.17409.1.3.3.1.1INTEGER {bootDefault(1), bootBOOTP(2), bootTFTP(3)}read-writemandatory
commonAgentReset
OBJECT-TYPE
Acting Restart, write'1 'will enable agents to restart, the value will be included in other non-functional. Reading this object return value'1 ', the agent had no effect on.
1.3.6.1.4.1.17409.1.3.3.1.2INTEGER {reset(1)}read-writemandatory
commonAgentMaxTraps
OBJECT-TYPE
Acting detected alarm when sent to the management of the largest number of TRAP, 0 that manufacturers use the default default values.
1.3.6.1.4.1.17409.1.3.3.1.3INTEGERread-writemandatory
commonAgentTrapMinInterval
OBJECT-TYPE
Acting TRAP send the minimum spacing units for s.
1.3.6.1.4.1.17409.1.3.3.1.4INTEGERread-writemandatory
commonAgentTrapMaxInterval
OBJECT-TYPE
Acting TRAP send the largest spacing units for s.
1.3.6.1.4.1.17409.1.3.3.1.5INTEGERread-writemandatory
commonTrapAck
OBJECT-TYPE
The variables used to notify Snmp agents, it issued the warning Trap has received information management console, do not have to re-hair. The content of the variables in alarmLogInformation MIB and the same warning. Agents received after the adoption of alarmLogInformation management can clearly know the host response is a warning which Trap information, thereby stop the alarm information re the Trap.
1.3.6.1.4.1.17409.1.3.3.1.6OCTET STRING (SIZE(17..255))read-writeoptional
commonAgentTrapTable
OBJECT-TYPE
Acting Information Table TRAP.
1.3.6.1.4.1.17409.1.3.3.1.7not-accessiblemandatory
commonAgentTrapEntry
OBJECT-TYPE
Acting Head TRAP Information Table.
1.3.6.1.4.1.17409.1.3.3.1.7.1not-accessiblemandatory
commonAgentTrapIndex
OBJECT-TYPE
TRAP Table Index.
1.3.6.1.4.1.17409.1.3.3.1.7.1.1INTEGERread-onlymandatory
commonAgentTrapIP
OBJECT-TYPE
When the purpose of the TRAP host's IP address.
1.3.6.1.4.1.17409.1.3.3.1.7.1.2IpAddressread-writemandatory
commonAgentTrapCommunity
OBJECT-TYPE
Send the Community string TRAP.
1.3.6.1.4.1.17409.1.3.3.1.7.1.3DisplayString (SIZE(0..64))read-writemandatory
commonAgentTrapStatus
OBJECT-TYPE
It said the opening of the TRAP.
1.3.6.1.4.1.17409.1.3.3.1.7.1.4INTEGER {commonAgentTrapEnable(1), commonAgentTrapDisable(2)}read-writemandatory
commonDeviceGroup
OBJECT-IDENTITY
1.3.6.1.4.1.17409.1.3.3.2
commonDeviceNum
OBJECT-TYPE
The agent said that the current management is the number of devices.
1.3.6.1.4.1.17409.1.3.3.2.1INTEGERread-writemandatory
commonDeviceInfoTable
OBJECT-TYPE
Acting is currently public information management equipment List.
1.3.6.1.4.1.17409.1.3.3.2.2not-accessiblemandatory
commonDeviceInfoEntry
OBJECT-TYPE
Acting is currently public information management equipment list Table Head.
1.3.6.1.4.1.17409.1.3.3.2.2.1not-accessiblemandatory
commonDeviceSlot
OBJECT-TYPE
Acting is currently under the management of the equipment list of public information table Index.
1.3.6.1.4.1.17409.1.3.3.2.2.1.1INTEGERread-onlymandatory
commonDevicesID
OBJECT-TYPE
Designated equipment manufacturers logo.
1.3.6.1.4.1.17409.1.3.3.2.2.1.2OCTET STRING (SIZE(0..40))read-onlymandatory
commonDeviceVendor
OBJECT-TYPE
Equipment manufacturers.
1.3.6.1.4.1.17409.1.3.3.2.2.1.3DisplayString (SIZE(0..255))read-onlymandatory
commonDeviceModelNumber
OBJECT-TYPE
Equipment Model.
1.3.6.1.4.1.17409.1.3.3.2.2.1.4DisplayString (SIZE(0..255))read-onlymandatory
commonDeviceSerialNumber
OBJECT-TYPE
The string of equipment.
1.3.6.1.4.1.17409.1.3.3.2.2.1.5DisplayString (SIZE(0..255))read-onlymandatory
commonDeviceVendorInfo
OBJECT-TYPE
Equipment suppliers of other special designated information.
1.3.6.1.4.1.17409.1.3.3.2.2.1.6DisplayString (SIZE(0..255))read-onlyoptional
commonDeviceStatus
OBJECT-TYPE
The state equipment Bit 0: RSVD0 Bit 1: RSVD1 Bit 2: RSVD2 Bit 3: MAJOR ALARMS Bit 4: MINOR ALARMS Bit 5: RSVD5 Bit 6: RSVD6 Bit 7: RSVD7
1.3.6.1.4.1.17409.1.3.3.2.2.1.7OCTET STRING (SIZE(1))read-onlymandatory
commonDeviceReset
OBJECT-TYPE
Write'1 'will be reset equipment, other values will be written into the non-functional. Reading this object return value'1 ', had no effect on equipment.
1.3.6.1.4.1.17409.1.3.3.2.2.1.8INTEGER {reset(1)}read-writemandatory
commonDeviceAlarmDetectionControl
OBJECT-TYPE
This object used to control equipment Alarm Detection.
1.3.6.1.4.1.17409.1.3.3.2.2.1.9INTEGER {detectionDisabled(1), detectionEnabled(2), detectionEnabledAndRegenerate(3)}read-writemandatory
commonDeviceMACAddress
OBJECT-TYPE
Equipment MAC address.
1.3.6.1.4.1.17409.1.3.3.2.2.1.10IpAddressread-onlymandatory
commonDeviceTamperStatus
OBJECT-TYPE
Report of the safety switch equipment (such as whether to open up the lid) state that this object is called discrete attributes of a corresponding entry in the table. Intact that normal, expressed alarm compromised.
1.3.6.1.4.1.17409.1.3.3.2.2.1.11INTEGER {intact(1), compromised(2)}read-onlyoptional
commonDeviceInternalTemperature
OBJECT-TYPE
Equipment Room (machine) temperature, units degrees Celsius. This request object attribute in a corresponding entry in the table.
1.3.6.1.4.1.17409.1.3.3.2.2.1.12INTEGER (-128..127)read-onlyoptional
commonDeviceResetCause
OBJECT-TYPE
Equipment that the reasons for the recent reduction.
1.3.6.1.4.1.17409.1.3.3.2.2.1.13INTEGER {other(1), powerup(2), command(3), watchdog(4), craft(5)}read-onlymandatory
commonDeviceCraftStatus
OBJECT-TYPE
This object interface that local equipment (such as RS232 or RS485 interface) state.
1.3.6.1.4.1.17409.1.3.3.2.2.1.14INTEGER {disconnected(1), connected(2)}read-onlymandatory
commonDevicesOID
OBJECT-TYPE
Goals identifier string, point to a concrete realization of the equipment.
1.3.6.1.4.1.17409.1.3.3.2.2.1.15OBJECT IDENTIFIERread-onlymandatory
commonDeviceAcct
OBJECT-TYPE
Equipment that the accumulated work time, units of s.
1.3.6.1.4.1.17409.1.3.3.2.2.1.16Counterread-onlyoptional
commonDeviceName
OBJECT-TYPE
Equipment Name.
1.3.6.1.4.1.17409.1.3.3.2.2.1.17DisplayString (SIZE(0..255))read-onlymandatory
commonDeviceMFD
OBJECT-TYPE
Date of production equipment.
1.3.6.1.4.1.17409.1.3.3.2.2.1.18DisplayString (SIZE(10))read-onlymandatory
commonDeviceFW
OBJECT-TYPE
Firmware information equipment.
1.3.6.1.4.1.17409.1.3.3.2.2.1.19DisplayString (SIZE(0..255))read-onlymandatory
oaIdent
OBJECT-IDENTITY
1.3.6.1.4.1.17409.1.11
oaVendorOID
OBJECT-TYPE
This object provides manufacturers of optical amplifier MIB expansion. Without the expansion, this should be targeting at the optical amplifier nodes oaIdent.
1.3.6.1.4.1.17409.1.11.1OBJECT IDENTIFIERread-onlyoptional
oaOutputOpticalPower
OBJECT-TYPE
The output optical power units to 0.1 dBm, the object attributes required to register an entry MIB.
1.3.6.1.4.1.17409.1.11.2INTEGER (0..65535)read-onlymandatory
oaInputOpticalPower
OBJECT-TYPE
Input optical power units to 0.1 dBm, the object attributes required to register an entry MIB.
1.3.6.1.4.1.17409.1.11.3INTEGER (-128..127)read-onlymandatory
oaPumpTable
OBJECT-TYPE
EDFA laser pump Information Table.
1.3.6.1.4.1.17409.1.11.4not-accessiblemandatory
oaPumpEntry
OBJECT-TYPE
Each laser-pumped optical amplifier Information Table Head.
1.3.6.1.4.1.17409.1.11.4.1not-accessiblemandatory
oaPumpIndex
OBJECT-TYPE
Laser-pumped optical amplifier index value.
1.3.6.1.4.1.17409.1.11.4.1.1INTEGERread-onlymandatory
oaPumpBIAS
OBJECT-TYPE
The pump laser bias current, flat mA, this attribute MIB objects require an entry in the register.
1.3.6.1.4.1.17409.1.11.4.1.2INTEGER (0..65535)read-onlymandatory
oaPumpTEC
OBJECT-TYPE
Current laser pump refrigeration unit is 0.01 A, this attribute MIB objects require an entry in the register.
1.3.6.1.4.1.17409.1.11.4.1.3INTEGER (-32768..32767)read-onlyoptional
oaPumpTemp
OBJECT-TYPE
Laser pump temperature, units of 0.10 C, this attribute MIB objects require an entry in the register.
1.3.6.1.4.1.17409.1.11.4.1.4INTEGER (0..32768)read-onlymandatory
oaNumberDCPowerSupply
OBJECT-TYPE
The number of internal DC power supply, 0 expressed transponder does not support this function.
1.3.6.1.4.1.17409.1.11.5INTEGER (0..16)read-onlymandatory
oaDCPowerSupplyMode
OBJECT-TYPE
Power supply mode: load sharing, standby switching or an independent power supply.
1.3.6.1.4.1.17409.1.11.6INTEGER {loadsharing(1), switchedRedundant(2), aloneSupply(3)}read-onlyoptional
oaDCPowerTable
OBJECT-TYPE
DC Power Information Table.
1.3.6.1.4.1.17409.1.11.7not-accessiblemandatory
oaDCPowerEntry
OBJECT-TYPE
DC Power Information Table Head.
1.3.6.1.4.1.17409.1.11.7.1not-accessiblemandatory
oaDCPowerIndex
OBJECT-TYPE
DC Power Index.
1.3.6.1.4.1.17409.1.11.7.1.1INTEGERread-onlymandatory
oaDCPowerVoltage
OBJECT-TYPE
Supply voltage, the unit is 0.1 V. This attribute MIB objects require an entry in the register.
1.3.6.1.4.1.17409.1.11.7.1.2INTEGER (-32768..32767)read-onlymandatory
oaDCPowerCurrent
OBJECT-TYPE
Electricity power supply unit is 0.01 A. This attribute MIB objects require an entry in the register.
1.3.6.1.4.1.17409.1.11.7.1.3INTEGER (0..65535)read-onlymandatory
oaDCPowerName
OBJECT-TYPE
Indicate the name of the power supply, for example: 24 V DC power supply. This field value by the user, should at least be marked with a number of power supply voltage and distinguish between each other. When the object of this table have a warning, that this object should be put into the name of alarmText hfcAlarmEvent traps in the target.
1.3.6.1.4.1.17409.1.11.7.1.4DisplayStringread-onlymandatory
oaOutputOpticalPowerSet
OBJECT-TYPE
The output optical power control ,units to 0.1 dBm
1.3.6.1.4.1.17409.1.11.11INTEGER (0..65535)read-writemandatory
oaGainSet
OBJECT-TYPE
units to 0.1 dB
1.3.6.1.4.1.17409.1.11.12INTEGER (0..65535)read-writemandatory
powerSupplyStatusA
OBJECT-TYPE
Returns the operating status of power supply A.
1.3.6.1.4.1.17409.1.11.32INTEGER {undefined(0), nominal(1), failure(2), notInstalled(3)}read-onlycurrent
powerSupplyStatusB
OBJECT-TYPE
Returns the operating status of power supply B.
1.3.6.1.4.1.17409.1.11.33INTEGER {undefined(0), nominal(1), failure(2), notInstalled(3)}read-onlycurrent

Notifications

NameOIDStatus
hfcColdStart
NOTIFICATION-TYPE
HfcColdStart traps that are sent to re-initialization protocol entities, and entities agent configuration or agreement may have changed. This trap only after the success of transponder sent registration.
1.3.6.1.4.1.17409.1.0.0
hfcAlarmEvent
NOTIFICATION-TYPE
When detected in the event of alarm information sent this trap, whether bundled alarmText variable parameter under warning object to determine. Some of the parameters only need to bind the alarm first three variables.
1.3.6.1.4.1.17409.1.0.1
hfcWarmStart
NOTIFICATION-TYPE
HfcWarmStart traps that are sent to re-initialization protocol entities, and entities agent configuration or agreement has not changed. This trap only after the completion of transponder sent registration.
1.3.6.1.4.1.17409.1.0.2