MIBs Depot

NORTEL-WLAN-AP-MIB

Registered at
1.3.6.1.4.1.45.1.11.1
Last updated
2004-04-12 00:00
Organization
Nortel Networks
Revisions
2003-07-16 00:00, 2003-09-11 00:00, 2004-04-12 00:00
Namespace
nortel
Source file
NORTEL-WLAN-AP-MIB
Digest
sha256:a8772a96724d10dc299161eee7467875d1b06dcbd6e24425ff8d95847c7614fb

Description

Nortel Wireless LAN AP MIB Copyright 2003-2004 Nortel Networks, Inc. All rights reserved. This Nortel Networks SNMP Management Information Base Specification (Specification) embodies Nortel Networks' confidential and proprietary intellectual property. Nortel Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS,' and Nortel Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.

Contact

Nortel Networks

Imports

FromSymbols
IF-MIBInterfaceIndex, ifIndex, ifPhysAddress
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue
SYNOPTICS-ROOT-MIBwlan2200

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
NORTEL-WLAN-AP-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
SYNOPTICS-ROOT-MIB

Textual conventions

NameOIDSyntaxAccessStatus
NtWlanApDataRate
TEXTUAL-CONVENTION
A data rate, measured in increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s. For example, a value of 2 means a data rate of 1 Mb/s, while a value of 5 means a data rate of 2.5 Mb/s.
current
NtWlanApWEPKey
TEXTUAL-CONVENTION
A WEP key. Valid sizes are 5, 13, and 16 octets, corresponding to WEP key lengths of 64, 128, and 152 bits, respectively. A length of 0 is also allowed, so that retrieval of objects containing a valid key value can return an empty string so as to avoid key disclosure.
current

Objects

NameOIDSyntaxAccessStatus
ntWlanApSys
OBJECT-IDENTITY
1.3.6.1.4.1.45.1.11.1.1
ntWlanSwHardwareVer
OBJECT-TYPE
Hardware version of the main board.
1.3.6.1.4.1.45.1.11.1.1.1DisplayString (SIZE(0..20))read-onlycurrent
ntWlanSwBootRomVer
OBJECT-TYPE
Boot ROM code version of the main board.
1.3.6.1.4.1.45.1.11.1.1.2DisplayString (SIZE(0..20))read-onlycurrent
ntWlanSwOpCodeVer
OBJECT-TYPE
Operation code version of the main board.
1.3.6.1.4.1.45.1.11.1.1.3DisplayString (SIZE(0..20))read-onlycurrent
ntWlanSwCountryCode
OBJECT-TYPE
Country code of the AP. AL-ALBANIA, DZ-ALGERIA, AR-ARGENTINA, AM-ARMENIA, AU-AUSTRALIA, AT-AUSTRIA, AZ-AZERBAIJAN, BH-BAHRAIN, BY-BELARUS, BE-BELGIUM, BZ-BELIZE, BO-BOLVIA, BR-BRAZIL, BN-BRUNEI_DARUSSALAM, BG-BULGARIA, CA-CANADA, CL-CHILE, CN-CHINA, CO-COLOMBIA, CR-COSTA_RICA, HR-CROATIA, CY-CYPRUS, CZ-CZECH_REPUBLIC, DK-DENMARK, DO-DOMINICAN_REPUBLIC, EC-ECUADOR, EG-EGYPT, EE-ESTONIA, FI-FINLAND, FR-FRANCE, GE-GEORGIA, DE-GERMANY, GR-GREECE, GT-GUATEMALA, HK-HONG_KONG, HU-HUNGARY, IS-ICELAND, IN-INDIA, ID-INDONESIA, IR-IRAN, IE-IRELAND, IL-ISRAEL, IT-ITALY, JP-JAPAN, JO-JORDAN, KZ-KAZAKHSTAN, KP-NORTH_KOREA, KR-KOREA_REPUBLIC, KW-KUWAIT, LV-LATVIA, LB-LEBANON, LI-LIECHTENSTEIN, LT-LITHUANIA, LU-LUXEMBOURG, MO-MACAU, MK-MACEDONIA, MY-MALAYSIA, MX-MEXICO, MC-MONACO, MA-MOROCCO, NL-NETHERLANDS, NZ-NEW_ZEALAND, NO-NORWAY, OM-OMAN, PK-PAKISTAN, PA-PANAMA, PE-PERU, PH-PHILIPPINES, PL-POLAND, PT-PORTUGAL, PR-PUERTO_RICO, QA-QATAR, RO-ROMANIA, RU-RUSSIA, SA-SAUDI_ARABIA, SG-SINGAPORE, SK-SLOVAK_REPUBLIC, SI-SLOVENIA, ZA-SOUTH_AFRICA, ES-SPAIN, SE-SWEDEN, CH-SWITZERLAND, SY-SYRIA, TW-TAIWAN, TH-THAILAND, TR-TURKEY, UA-UKRAINE, AE-UNITED_ARAB_EMIRATES, GB-UNITED_KINGDOM, US-UNITED_STATES, UY-URUGUAY, VE-VENEZUELA, VN-VIETNAM
1.3.6.1.4.1.45.1.11.1.1.4DisplayString (SIZE(2))read-writecurrent
ntWlanSwNNDataFileVer
OBJECT-TYPE
Nortel Networks Customization Data File Version.
1.3.6.1.4.1.45.1.11.1.1.5DisplayString (SIZE(0..20))read-onlycurrent
ntWlanApLineMgnt
OBJECT-IDENTITY
1.3.6.1.4.1.45.1.11.1.2
ntWlanLineTable
OBJECT-TYPE
Table of descriptive and status information about configuration of each RS-232 line in this system
1.3.6.1.4.1.45.1.11.1.2.1not-accessiblecurrent
ntWlanLineEntry
OBJECT-TYPE
An entry in the table, containing information about configuration in one RS232 line of the Access Point.
1.3.6.1.4.1.45.1.11.1.2.1.1not-accessiblecurrent
ntWlanLineIndex
OBJECT-TYPE
This is defined as RS-232 index.
1.3.6.1.4.1.45.1.11.1.2.1.1.1Integer32 (1..2147483647)not-accessiblecurrent
ntWlanLineDataBits
OBJECT-TYPE
This is defined as number of data bits for the RS232 interface.
1.3.6.1.4.1.45.1.11.1.2.1.1.2Integer32read-onlycurrent
ntWlanLineParity
OBJECT-TYPE
This is defined as parity of the RS232 interface.
1.3.6.1.4.1.45.1.11.1.2.1.1.3INTEGER {odd(1), even(2), none(99)}read-onlycurrent
ntWlanLineSpeed
OBJECT-TYPE
This is defined as the speed of the RS-232 interface.
1.3.6.1.4.1.45.1.11.1.2.1.1.4Integer32read-onlycurrent
ntWlanLineStopBits
OBJECT-TYPE
This is defined as the number of stop bits for the RS-232 interface.
1.3.6.1.4.1.45.1.11.1.2.1.1.5Integer32read-onlycurrent
ntWlanApPortMgnt
OBJECT-IDENTITY
1.3.6.1.4.1.45.1.11.1.3
ntWlanPortTable
OBJECT-TYPE
Table of descriptive and status information about configuration of each switch port (including expansion slot) in this system. This table also contains information about each trunk (similar to Cisco's EtherChannel).
1.3.6.1.4.1.45.1.11.1.3.1not-accessiblecurrent
ntWlanPortEntry
OBJECT-TYPE
An entry in the table, containing information about configuration in one switch port of the switch.
1.3.6.1.4.1.45.1.11.1.3.1.1not-accessiblecurrent
ntWlanPortIndex
OBJECT-TYPE
This is defined as ifIndex in the IF-MIB.
1.3.6.1.4.1.45.1.11.1.3.1.1.1InterfaceIndexnot-accessiblecurrent
ntWlanPortName
OBJECT-TYPE
Indicates the port name. This is same as ifAlias in the IF-MIB (RFC2863 or later).
1.3.6.1.4.1.45.1.11.1.3.1.1.2DisplayString (SIZE(0..64))read-onlycurrent
ntWlanPortType
OBJECT-TYPE
Indicates the port type.
1.3.6.1.4.1.45.1.11.1.3.1.1.3INTEGER {other(1), hundredBaseTX(2), hundredBaseFX(3), thousandBaseSX(4), thousandBaseLX(5), thousandBaseT(6), thousandBaseGBIC(7), thousandBaseMiniGBIC(8)}read-onlycurrent
ntWlanPortSpeedDpxCfg
OBJECT-TYPE
Set the port speed and duplex mode as follows: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode halfDuplex100(4) - 100Mbps and half duplex mode fullDuplex100(5) - 100Mbps and full duplex mode halfDuplex1000(6) - 1000Mbps and half duplex mode fullDuplex1000(7) - 1000Mbps and full duplex mode hundredBaseTX port can be set as halfDuplex10(2) fullDuplex10(3) halfDuplex100(4) fullDuplex100(5) hundredBaseFX port can be set as halfDuplex100(4) fullDuplex100(5) thousandBaseSX port can be set as halfDuplex1000(6) fullDuplex1000(7) The actual operating speed and duplex of the port is given by portSpeedDpxStatus.
1.3.6.1.4.1.45.1.11.1.3.1.1.4INTEGER {reserved(1), halfDuplex10(2), fullDuplex10(3), halfDuplex100(4), fullDuplex100(5), halfDuplex1000(6), fullDuplex1000(7)}read-onlycurrent
ntWlanPortFlowCtrlCfg
OBJECT-TYPE
(1) Flow control mechanism is enabled. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, the port uses IEEE 802.3x flow control mechanism. If the port type is hundredBaseFX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, Flow control mechanism will not function. (2) Flow control mechanism is disabled. (3) Flow control mechanism is backPressure. when the port is in fullDuplex mode.This flow control mechanism will not function. (4) Flow control mechanism is IEEE 802.3x flow control. when the port is in halfDuplex mode.This flow control mechanism will not function. hundredBaseTX and thousandBaseSX port can be set as: enabled(1), disabled(2), backPressure(3), dot3xFlowControl(4). hundredBaseFX port can be set as: enabled(1), disabled(2), backPressure(3). The actual flow control mechanism is used given by portFlowCtrlStatus.
1.3.6.1.4.1.45.1.11.1.3.1.1.5INTEGER {enabled(1), disabled(2), backPressure(3), dot3xFlowControl(4)}read-onlycurrent
ntWlanPortCapabilities
OBJECT-TYPE
Port capabilities.
1.3.6.1.4.1.45.1.11.1.3.1.1.6INTEGER {portCap10full(1), portCap100half(2), portCap100full(3), portCap1000half(4), portCap1000full(5), reserved6(6), reserved7(7), reserved8(8), reserved9(9), reserved10(10), reserved11(11), reserved12(12), reserved13(13), portCapSym(14), portCapFlowCtrl(15), portCap10half(99)}read-onlycurrent
ntWlanPortAutonegotiation
OBJECT-TYPE
Whether autonegotiation is enabled.
1.3.6.1.4.1.45.1.11.1.3.1.1.7INTEGER {enabled(1), disabled(2)}read-onlycurrent
ntWlanPortSpeedDpxStatus
OBJECT-TYPE
The operating speed and duplex mode of the switched port. If this index is a trunk, the speed is the speed of its individual members. If this index is a trunk and the result is inconsistent among its member ports, this value is error(1).
1.3.6.1.4.1.45.1.11.1.3.1.1.8INTEGER {error(1), halfDuplex10(2), fullDuplex10(3), halfDuplex100(4), fullDuplex100(5), halfDuplex1000(6), fullDuplex1000(7)}read-onlycurrent
ntWlanPortFlowCtrlStatus
OBJECT-TYPE
(2) BackPressure flow control machanism is used. (3) IEEE 802.3 flow control machanism is used. (4) Flow control mechanism is disabled. If this index is a trunk and the result is inconsistent among its member ports, this value is error(1).
1.3.6.1.4.1.45.1.11.1.3.1.1.9INTEGER {error(1), backPressure(2), dot3xFlowControl(3), none(4)}read-onlycurrent
ntWlanApFileTransferMgt
OBJECT-IDENTITY
1.3.6.1.4.1.45.1.11.1.4
ntWlanTransferStart
OBJECT-TYPE
Set to go(1) to start a transfer.
1.3.6.1.4.1.45.1.11.1.4.1INTEGER {go(1), nogo(2)}read-writecurrent
ntWlanTransferType
OBJECT-TYPE
Type of file to transfer.
1.3.6.1.4.1.45.1.11.1.4.2INTEGER {ftpDownload(1), tftpDownload(2), ftpUpload(3), tftpUpload(4)}read-writecurrent
ntWlanFileType
OBJECT-TYPE
Type of file to transfer.
1.3.6.1.4.1.45.1.11.1.4.3INTEGER {firmware(1), config(2), nortelConfig(3)}read-writecurrent
ntWlanSrcFile
OBJECT-TYPE
The source file name for TFTP transfer when a transfer is next requested via this MIB. This value is set to the zero length string when no file name has been specified.
1.3.6.1.4.1.45.1.11.1.4.4DisplayString (SIZE(0..127))read-writecurrent
ntWlanDestFile
OBJECT-TYPE
The destination file name for TFTP transfer when a transfer is next requested via this MIB. This value is set to the zero length string when no file name has been specified.
1.3.6.1.4.1.45.1.11.1.4.5DisplayString (SIZE(0..127))read-writecurrent
ntWlanFileServer
OBJECT-TYPE
The IP address of the TFTP server for transfer when a download is next requested via this MIB. This value is set to `0.0.0.0' when no IP address has been specified.
1.3.6.1.4.1.45.1.11.1.4.6IpAddressread-writecurrent
ntWlanUserName
OBJECT-TYPE
The username specified for an FTP Transfer.
1.3.6.1.4.1.45.1.11.1.4.7DisplayString (SIZE(0..127))read-writecurrent
ntWlanPassword
OBJECT-TYPE
The password specified for an FTP Transfer.
1.3.6.1.4.1.45.1.11.1.4.8DisplayString (SIZE(0..127))read-writecurrent
ntWlanFileTransferStatus
OBJECT-TYPE
The status of the current FTP Transfer process.
1.3.6.1.4.1.45.1.11.1.4.9INTEGER {none(1), inProgress(2), success(3), fail(4), invalidSource(5), invalidDestination(6), outOfMemory(7), outOfSpace(8), fileNotFound(9)}read-onlycurrent
ntWlanApResetMgt
OBJECT-IDENTITY
1.3.6.1.4.1.45.1.11.1.5
ntWlanRestartOpCodeFile
OBJECT-TYPE
Name of op-code file for start-up.
1.3.6.1.4.1.45.1.11.1.5.1DisplayString (SIZE(0..127))read-writecurrent
ntWlanRestartControl
OBJECT-TYPE
Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Setting this object to coldBoot(3) causes the device to reinitialize configuration parameters in non-volatile memory to default values and restart the application software. When the device is running normally, this variable has a value of running(1).
1.3.6.1.4.1.45.1.11.1.5.2INTEGER {running(1), warmBoot(2), coldBoot(3)}read-writecurrent
ntWlanApIpMgt
OBJECT-IDENTITY
1.3.6.1.4.1.45.1.11.1.6
ntWlanNetConfigIPAddress
OBJECT-TYPE
The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use DHCP to try to figure out what these values should be. If DHCP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device).
1.3.6.1.4.1.45.1.11.1.6.1IpAddressread-writecurrent
ntWlanNetConfigSubnetMask
OBJECT-TYPE
The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use DHCP to try to figure out what these values should be. If DHCP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device).
1.3.6.1.4.1.45.1.11.1.6.2IpAddressread-writecurrent
ntWlanNetDefaultGateway
OBJECT-TYPE
The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0.
1.3.6.1.4.1.45.1.11.1.6.3IpAddressread-writecurrent
ntWlanIpHttpState
OBJECT-TYPE
Whether HTTP is enabled.
1.3.6.1.4.1.45.1.11.1.6.4INTEGER {enabled(1), disabled(2)}read-writecurrent
ntWlanIpHttpPort
OBJECT-TYPE
The port number for HTTP.
1.3.6.1.4.1.45.1.11.1.6.5INTEGER (1..65535)read-writecurrent
ntWlanApDot11
OBJECT-IDENTITY
1.3.6.1.4.1.45.1.11.1.7
ntWlanDot11Phy
OBJECT-IDENTITY
1.3.6.1.4.1.45.1.11.1.7.4
ntWlanDot11PhyOperationTable
OBJECT-TYPE
Table of descriptive and status information about configuration of each radio of the AP.
1.3.6.1.4.1.45.1.11.1.7.4.1not-accessiblecurrent
ntWlanDot11PhyOperationEntry
OBJECT-TYPE
An entry in the table, containing information about configuration in one radio of the AP.
1.3.6.1.4.1.45.1.11.1.7.4.1.1not-accessiblecurrent
ntWlanDot11Index
OBJECT-TYPE
Radio index of the AP.
1.3.6.1.4.1.45.1.11.1.7.4.1.1.1Integer32 (1..2147483647)not-accessiblecurrent
ntWlanDot11TurboModeEnabled
OBJECT-TYPE
This attribute, when true, shall indicate that the nortel's propietory turbo mode option is enabled. The default value of this attribute shall be false.
1.3.6.1.4.1.45.1.11.1.7.4.1.1.3INTEGER {on(1), off(2), none(99)}read-onlycurrent
ntWlanDot11PreambleLength
OBJECT-TYPE
This attribute determines whether or not a short or a long preamble is used to delineate 802.11 frames.
1.3.6.1.4.1.45.1.11.1.7.4.1.1.4INTEGER {short(1), long(2), twelveSymbols(99)}read-writecurrent
ntWlanDot11dWorldModeEnabled
OBJECT-TYPE
This attribute determines whether 802.11d world mode is enabled for this radio.
1.3.6.1.4.1.45.1.11.1.7.4.1.1.5TruthValueread-writecurrent
ntWlanDot11ClosedSystem
OBJECT-TYPE
This attribute determines whether the radio operates as a closed system. When configured as a closed system, the SSID is not included when broadcasting periodic beacon frames.
1.3.6.1.4.1.45.1.11.1.7.4.1.1.6TruthValueread-writecurrent
ntWlanDot11AuthenticationEntry
OBJECT-IDENTITY
1.3.6.1.4.1.45.1.11.1.7.5
ntWlanDot118021xSupport
OBJECT-TYPE
This attribute, when true(1), indicates that the Enterprise Access Point supports the 802.1x authentication algorithm.
1.3.6.1.4.1.45.1.11.1.7.5.1TruthValueread-writecurrent
ntWlanDot118021xRequired
OBJECT-TYPE
This attribute, when true(1), indicates that the Enterprise Access Point requires successful 802.1x authentication for any clients accessing the network.
1.3.6.1.4.1.45.1.11.1.7.5.2TruthValueread-writecurrent
ntWlanDot118021xBcastKeyRefresh
OBJECT-TYPE
The broadcast key refresh rate.
1.3.6.1.4.1.45.1.11.1.7.5.3Integer32 (0..1440)read-writecurrent
ntWlanDot118021xSessKeyRefresh
OBJECT-TYPE
The session key refresh rate.
1.3.6.1.4.1.45.1.11.1.7.5.4Integer32 (0..1440)read-writecurrent
ntWlanDot118021xReAuthRefresh
OBJECT-TYPE
The re-authentication refresh rate.
1.3.6.1.4.1.45.1.11.1.7.5.5Integer32 (0..65535)read-writecurrent
ntWlanDot11AuthenticationServerTable
OBJECT-TYPE
Table of descriptive and status information about configuration of each authentication server.
1.3.6.1.4.1.45.1.11.1.7.6not-accessiblecurrent
ntWlanDot11AuthenticationServerEntry
OBJECT-TYPE
An entry in the table, containing information about configuration in one radio of the AP.
1.3.6.1.4.1.45.1.11.1.7.6.1not-accessiblecurrent
ntWlanDot11ServerIndex
OBJECT-TYPE
Radio index of the AP.
1.3.6.1.4.1.45.1.11.1.7.6.1.1Integer32 (1..2147483647)not-accessiblecurrent
ntWlanDot11AuthenticationServer
OBJECT-TYPE
This values indicates the IP address of the authentication server.
1.3.6.1.4.1.45.1.11.1.7.6.1.2IpAddressread-writecurrent
ntWlanDot11AuthenticationPort
OBJECT-TYPE
This values indicates the UDP Port used by the primary authentication server.
1.3.6.1.4.1.45.1.11.1.7.6.1.3INTEGER (1024..65535)read-writecurrent
ntWlanDot11AuthenticationKey
OBJECT-TYPE
This values indicates the shared key used by the authentication server.
1.3.6.1.4.1.45.1.11.1.7.6.1.4DisplayString (SIZE(0..20))read-writecurrent
ntWlanDot11AuthenticationRetransmit
OBJECT-TYPE
This values indicates the retransmit timer length used by the authentication server.
1.3.6.1.4.1.45.1.11.1.7.6.1.5INTEGER (1..30)read-writecurrent
ntWlanDot11AuthenticationTimeout
OBJECT-TYPE
This values indicates the Timeout value(sec) used by the authentication server.
1.3.6.1.4.1.45.1.11.1.7.6.1.6INTEGER (1..60)read-writecurrent
ntWlanDot11SecondaryAuthServer
OBJECT-TYPE
This values indicates the IP address of the secondary authentication server.
1.3.6.1.4.1.45.1.11.1.7.6.1.7IpAddressread-writecurrent
ntWlanDot11SecondaryAuthPort
OBJECT-TYPE
This values indicates the UDP Port used by the primary secondary authentication server.
1.3.6.1.4.1.45.1.11.1.7.6.1.8INTEGER (1024..65535)read-writecurrent
ntWlanDot11SecondaryAuthKey
OBJECT-TYPE
This values indicates the shared key used by the secondary authentication server.
1.3.6.1.4.1.45.1.11.1.7.6.1.9DisplayString (SIZE(0..20))read-writecurrent
ntWlanDot11SecondaryAuthRetransmit
OBJECT-TYPE
This values indicates the retransmit timer length used by the secondary authentication server.
1.3.6.1.4.1.45.1.11.1.7.6.1.10INTEGER (1..30)read-writecurrent
ntWlanDot11SecondaryAuthTimeout
OBJECT-TYPE
This values indicates the Timeout value(sec) used by the secondary authentication server.
1.3.6.1.4.1.45.1.11.1.7.6.1.11INTEGER (1..60)read-writecurrent
ntWlanDot11FilterTable
OBJECT-TYPE
Table of status information about each configured MAC Address Filtering Entry.
1.3.6.1.4.1.45.1.11.1.7.7not-accessiblecurrent
ntWlanDot11FilterEntry
OBJECT-TYPE
An entry in the table, containing information about configuration in one radio of the AP.
1.3.6.1.4.1.45.1.11.1.7.7.1not-accessiblecurrent
ntWlanDot11FilterIndex
OBJECT-TYPE
Filter index.
1.3.6.1.4.1.45.1.11.1.7.7.1.1Integer32 (1..2147483647)not-accessiblecurrent
ntWlanDot11FilterAddress
OBJECT-TYPE
This values indicates the MAC address of the filter entry.
1.3.6.1.4.1.45.1.11.1.7.7.1.2PhysAddressread-writecurrent
ntWlanDot11FilterStatus
OBJECT-TYPE
This values indicates the Status of the filter entry. Ifallowed, the client is allowed access to the network. If disallowed, the no frames will be forwarded to the network from the client.
1.3.6.1.4.1.45.1.11.1.7.7.1.3INTEGER {allowed(30), denied(31)}read-writecurrent
ntWlanDot11TrapTable
OBJECT-TYPE
Table of status information for Association and Disassociation Trap
1.3.6.1.4.1.45.1.11.1.7.9not-accessiblecurrent
ntWlanDot11TrapEntry
OBJECT-TYPE
An entry in the table, containing information for the association and disassociation trap.
1.3.6.1.4.1.45.1.11.1.7.9.1not-accessiblecurrent
ntWlanDot11InterfaceIndex
OBJECT-TYPE
Interface index.
1.3.6.1.4.1.45.1.11.1.7.9.1.1Integer32 (1..2147483647)not-accessiblecurrent
ntWlanDot11AssociationStationAddress
OBJECT-TYPE
This values indicates the MAC address of the Mobile Unit associating with this Access Point.
1.3.6.1.4.1.45.1.11.1.7.9.1.2PhysAddressread-onlycurrent
ntWlanDot11DisassociationStationAddress
OBJECT-TYPE
This values indicates the MAC address of the Mobile Unit no longer associated with this Access Point.
1.3.6.1.4.1.45.1.11.1.7.9.1.3PhysAddressread-onlycurrent
ntWlanDot11AssociationMU
OBJECT-TYPE
This values indicates the number of Mobile Units associated on the Interface
1.3.6.1.4.1.45.1.11.1.7.9.1.4INTEGER (1..65535)read-onlycurrent
ntWlanApTraps
OBJECT-IDENTITY
1.3.6.1.4.1.45.1.11.1.8
ntWlanApTraps0
OBJECT-IDENTITY
1.3.6.1.4.1.45.1.11.1.8.0
ntWlanApMuAssocTrapEnabled
OBJECT-TYPE
This object controls whether ntWlanApMuAssocTrap notifications will be generated when an MU associates with the AP. If this object is true(1), then the notification will be generated. If it is false, the notification will not be generated.
1.3.6.1.4.1.45.1.11.1.8.1TruthValueread-writecurrent
ntWlanApMuDisAssocTrapEnabled
OBJECT-TYPE
This object controls whether ntWlanApMuDisAssocTrap notifications will be generated when an MU disassociates from the AP. If this object is true(1), then the notification will be generated. If it is false, the notification will not be generated.
1.3.6.1.4.1.45.1.11.1.8.2TruthValueread-writecurrent
ntWlanApLID
OBJECT-IDENTITY
1.3.6.1.4.1.45.1.11.1.9
ntWlanApLIDCheckEtherLinkEnabled
OBJECT-TYPE
Indicates whether checks for ethernet link integrity are enabled.
1.3.6.1.4.1.45.1.11.1.9.1TruthValueread-writecurrent
ntWlanApLIDCheckIPLinkEnabled
OBJECT-TYPE
Indicates whether checks for IP link integrity are enabled.
1.3.6.1.4.1.45.1.11.1.9.2TruthValueread-writecurrent
ntWlanApLIDCheckIpLinkAddress
OBJECT-TYPE
The IP address to ping to check IP link integrity.
1.3.6.1.4.1.45.1.11.1.9.3IpAddressread-writecurrent
ntWlanApRateSupport
OBJECT-IDENTITY
1.3.6.1.4.1.45.1.11.1.10
ntWlanApRateSupportTable
OBJECT-TYPE
Table to configure which hardware-supported rates are actively supported, and which are basic rates required for an MU to connect to an AP. Entries must exist in this table for every hardware-supported rate for each appropriate ifIndex value.
1.3.6.1.4.1.45.1.11.1.10.1not-accessiblecurrent
ntWlanApRateSupportEntry
OBJECT-TYPE
An entry in the ntWlanApRateSupportTable.
1.3.6.1.4.1.45.1.11.1.10.1.1not-accessiblecurrent
ntWlanApRateSupportIfIndex
OBJECT-TYPE
The ifIndex value of the radio.
1.3.6.1.4.1.45.1.11.1.10.1.1.1InterfaceIndexnot-accessiblecurrent
ntWlanApRateSupportSpeed
OBJECT-TYPE
A supported data rate.
1.3.6.1.4.1.45.1.11.1.10.1.1.2NtWlanApDataRatenot-accessiblecurrent
ntWlanApRateSupportLevel
OBJECT-TYPE
This object indicates whether a specific rate is currently supported, and if so, whether it is a basic rate. off - indicates that this rate is not currently supported. supported - indicates that this rate is currently supported, but is not required to be supported by an MU in order to connect to this radio. supportedBasic - indicates that this rate is currently supported as a basic rate, and an MU must also support this rate in order to connect to this radio.
1.3.6.1.4.1.45.1.11.1.10.1.1.3INTEGER {off(0), supported(1), supportedBasic(2)}read-writecurrent
ntWlanApSecurity
OBJECT-IDENTITY
1.3.6.1.4.1.45.1.11.1.11
ntWlanApSecurityTable
OBJECT-TYPE
Table to configure WEP and WPA security parameters. Entries are per-radio.
1.3.6.1.4.1.45.1.11.1.11.1not-accessiblecurrent
ntWlanApSecurityEntry
OBJECT-TYPE
An entry in the ntWlanApSecurityTable.
1.3.6.1.4.1.45.1.11.1.11.1.1not-accessiblecurrent
ntWlanApSecurityIfIndex
OBJECT-TYPE
The ifIndex value of the radio.
1.3.6.1.4.1.45.1.11.1.11.1.1.1InterfaceIndexnot-accessiblecurrent
ntWlanApSecurityEnabled
OBJECT-TYPE
Indicates whether security is enabled for a radio.
1.3.6.1.4.1.45.1.11.1.11.1.1.2TruthValueread-writecurrent
ntWlanApSecurityWEPAuthType
OBJECT-TYPE
The WEP authentication type.
1.3.6.1.4.1.45.1.11.1.11.1.1.3INTEGER {openSystem(0), sharedKey(1)}read-writecurrent
ntWlanApSecurityWEPKeyLength
OBJECT-TYPE
Indicates the WEP key length being used.
1.3.6.1.4.1.45.1.11.1.11.1.1.4INTEGER {wepKey64(0), wepKey128(1), wepKey152(2)}read-writecurrent
ntWlanApSecurityWEPActiveKey
OBJECT-TYPE
Indicates which WEP key is currently in use.
1.3.6.1.4.1.45.1.11.1.11.1.1.5Integer32 (1..4)read-writecurrent
ntWlanApSecurityWEPKey1
OBJECT-TYPE
The first WEP key. Retrieval of this object will always return an empty string.
1.3.6.1.4.1.45.1.11.1.11.1.1.6NtWlanApWEPKeyread-writecurrent
ntWlanApSecurityWEPKey2
OBJECT-TYPE
The second WEP key. Retrieval of this object will always return an empty string.
1.3.6.1.4.1.45.1.11.1.11.1.1.7NtWlanApWEPKeyread-writecurrent
ntWlanApSecurityWEPKey3
OBJECT-TYPE
The third WEP key. Retrieval of this object will always return an empty string.
1.3.6.1.4.1.45.1.11.1.11.1.1.8NtWlanApWEPKeyread-writecurrent
ntWlanApSecurityWEPKey4
OBJECT-TYPE
The fourth WEP key. Retrieval of this object will always return an empty string.
1.3.6.1.4.1.45.1.11.1.11.1.1.9NtWlanApWEPKeyread-writecurrent
ntWlanApSecurityWPASupport
OBJECT-TYPE
Indicates whether WPA security is supported.
1.3.6.1.4.1.45.1.11.1.11.1.1.10INTEGER {supported(1), required(2), wepOnly(3)}read-writecurrent
ntWlanApSecurityWPAMode
OBJECT-TYPE
The WPA mode.
1.3.6.1.4.1.45.1.11.1.11.1.1.11INTEGER {dynamic(0), preSharedKey(1)}read-writecurrent
ntWlanApSecurityWPAPreSharedKey
OBJECT-TYPE
The WPA pre-shared key.
1.3.6.1.4.1.45.1.11.1.11.1.1.12OCTET STRING (SIZE(63))read-writecurrent
ntWlanApSecurityWPAMcastCypherMode
OBJECT-TYPE
The multicast cypher mode.
1.3.6.1.4.1.45.1.11.1.11.1.1.13INTEGER {wep(0), tkip(1), aes(2)}read-writecurrent
ntWlanApQoS
OBJECT-IDENTITY
1.3.6.1.4.1.45.1.11.1.12
ntWlanApQoSMode
OBJECT-TYPE
This object indicates the QoS mode being used. off - indicates QoS features are disabled. etherSrc - indicates that the ethernet source MAC address of received packets is mapped to an egress queue. etherDst - indicates that the ethernet destination MAC address of received packets is mapped to an egress queue. etherType - indicates that the ethernet type of of received packets is mapped to an egress queue. directPriorityMap - indicates that the priority value of received packets is used to map directly to an egress queue.
1.3.6.1.4.1.45.1.11.1.12.1INTEGER {off(0), etherSrc(1), etherDst(2), ethertype(3), directPriorityMap(4)}read-writecurrent
ntWlanApQoSEtherTypeToQueueTable
OBJECT-TYPE
Table to configure mappings from ethernet type to queue number.
1.3.6.1.4.1.45.1.11.1.12.2not-accessiblecurrent
ntWlanApQoSEtherTypeToQueueEntry
OBJECT-TYPE
An entry in the ntWlanApQoSTable.
1.3.6.1.4.1.45.1.11.1.12.2.1not-accessiblecurrent
ntWlanApQoSEtherTypeToQueueIndex
OBJECT-TYPE
An ethernet type, to be mapped to a queue.
1.3.6.1.4.1.45.1.11.1.12.2.1.1Integer32 (0..65535)not-accessiblecurrent
ntWlanApQoSEtherTypeToQueueNumber
OBJECT-TYPE
The queue number to which the ether type is mapped.
1.3.6.1.4.1.45.1.11.1.12.2.1.2Integer32 (0..7)read-writecurrent
ntWlanApQoSEtherTypeToQueueRowStatus
OBJECT-TYPE
This object is used to create and destroy entries in this table.
1.3.6.1.4.1.45.1.11.1.12.2.1.3RowStatusread-writecurrent
ntWlanApQoSMACToQueueTable
OBJECT-TYPE
Table to configure mappings from ethernet MAC address to queue number.
1.3.6.1.4.1.45.1.11.1.12.3not-accessiblecurrent
ntWlanApQoSMACToQueueEntry
OBJECT-TYPE
An entry in the ntWlanApQoSTable.
1.3.6.1.4.1.45.1.11.1.12.3.1not-accessiblecurrent
ntWlanApQoSMACToQueueAddress
OBJECT-TYPE
An ethernet MAC address, to be mapped to a queue.
1.3.6.1.4.1.45.1.11.1.12.3.1.1MacAddressnot-accessiblecurrent
ntWlanApQoSMACToQueueNumber
OBJECT-TYPE
The queue number to which the MAC address is mapped.
1.3.6.1.4.1.45.1.11.1.12.3.1.2Integer32 (0..7)read-writecurrent
ntWlanApQoSMACToQueueRowStatus
OBJECT-TYPE
This object is used to create and destroy entries in this table.
1.3.6.1.4.1.45.1.11.1.12.3.1.3RowStatusread-writecurrent
ntWlanApVlan
OBJECT-IDENTITY
1.3.6.1.4.1.45.1.11.1.13
ntWlanApVlanEnabled
OBJECT-TYPE
This object indicates whether Vlan support is enabled.
1.3.6.1.4.1.45.1.11.1.13.1TruthValueread-writecurrent
ntWlanApVlanTable
OBJECT-TYPE
Table to configure the default VID per-radio.
1.3.6.1.4.1.45.1.11.1.13.2not-accessiblecurrent
ntWlanApVlanEntry
OBJECT-TYPE
An entry in the ntWlanApVlanTable.
1.3.6.1.4.1.45.1.11.1.13.2.1not-accessiblecurrent
ntWlanApVlanIfIndex
OBJECT-TYPE
The ifIndex value of the radio.
1.3.6.1.4.1.45.1.11.1.13.2.1.1InterfaceIndexnot-accessiblecurrent
ntWlanApVlanDefaultVid
OBJECT-TYPE
The default VID of the radio.
1.3.6.1.4.1.45.1.11.1.13.2.1.2Integer32 (0..4094)read-writecurrent
ntWlanApVlanMUMACToVidTable
OBJECT-TYPE
Table containing mappings from Mobile Unit MAC addresses to VLAN ID values.
1.3.6.1.4.1.45.1.11.1.13.3not-accessiblecurrent
ntWlanApVlanMUMACToVidEntry
OBJECT-TYPE
An entry in the ntWlanApVlanMUMACToVidTable.
1.3.6.1.4.1.45.1.11.1.13.3.1not-accessiblecurrent
ntWlanApVlanMUMACToVidAddress
OBJECT-TYPE
The ethernet MAC address of a Mobile Unit.
1.3.6.1.4.1.45.1.11.1.13.3.1.1MacAddressnot-accessiblecurrent
ntWlanApVlanMUMACToVidNumber
OBJECT-TYPE
The VID to which this Mobile Unit's MAC is mapped.
1.3.6.1.4.1.45.1.11.1.13.3.1.2Integer32 (1..4094)read-writecurrent
ntWlanApStats
OBJECT-IDENTITY
1.3.6.1.4.1.45.1.11.1.14
ntWlanApMUStatsTable
OBJECT-TYPE
Table of per-Mobile Unit statistics.
1.3.6.1.4.1.45.1.11.1.14.1not-accessiblecurrent
ntWlanApMUStatsEntry
OBJECT-TYPE
An entry in the ntWlanApMUStatsTable.
1.3.6.1.4.1.45.1.11.1.14.1.1not-accessiblecurrent
ntWlanApMUStatsMUAddress
OBJECT-TYPE
The ethernet MAC address of the Mobile Unit.
1.3.6.1.4.1.45.1.11.1.14.1.1.1MacAddressnot-accessiblecurrent
ntWlanApMUStatsPacketsIn
OBJECT-TYPE
A count of the packets received from this MU.
1.3.6.1.4.1.45.1.11.1.14.1.1.2Counter32read-onlycurrent
ntWlanApMUStatsPacketsOut
OBJECT-TYPE
A count of the packets sent to this MU.
1.3.6.1.4.1.45.1.11.1.14.1.1.3Counter32read-onlycurrent
ntWlanApMUStatsOctetsIn
OBJECT-TYPE
A count of the octets received from this MU.
1.3.6.1.4.1.45.1.11.1.14.1.1.4Counter32read-onlycurrent
ntWlanApMUStatsOctetsOut
OBJECT-TYPE
A count of the octets sent to this MU.
1.3.6.1.4.1.45.1.11.1.14.1.1.5Counter32read-onlycurrent

Notifications

NameOIDStatus
ntWlanApDot1xAuthenticationFail
NOTIFICATION-TYPE
Indicates that a Mobile Unit failed 802.1x authentication. - ifPhysAddress is the MAC address of the Access Point sending this trap message. - ntWlanDot11AssociationStationAddress is the MAC address of the Mobile Unit.
1.3.6.1.4.1.45.1.11.1.8.0.101current
ntWlanApMuAssocTrap
NOTIFICATION-TYPE
Indicates that there is a Mobile Unit associating with this Access Point. - ifPhysAddress is the MAC address of the Access Point sending this trap message. - ntWlanDot11AssociationStationAddress is the MAC address of the Mobile Unit. Note: If two or more Mobile Units associate with the Access Point at the same time, ntWlanDot11AssociationStationAddress belongs to the last Mobile Unit. - ntWlanDot11AssociationMU is the number of Mobile Units currently associating with this Access Point.
1.3.6.1.4.1.45.1.11.1.8.0.111current
ntWlanApMuDisAssocTrap
NOTIFICATION-TYPE
Indicates that there is one Mobile Unit no longer associating with this Access Point anymore. - ifPhysAddress is the MAC address of the Access Point sending this trap message. - ntWlanDot11DisassociationStationAddress is the MAC address of the Mobile Unit. Note: If two or more Mobile Units un-associate with the Access Point at the same time, ntWlanDot11DisassociationStationAddress belongs to the last Mobile Unit. - ntWlanDot11AssociationMU is the number of Mobile Units currently associating with this Access Point.
1.3.6.1.4.1.45.1.11.1.8.0.112current
ntWlanApMuWEPAuthFail
NOTIFICATION-TYPE
Indicates that WEP authentication of a Mobile Unit failed. - ifIndex identifies the radio to which the MU attempted to connect. - ntWlanDot11AssociationStationAddress is the MAC address of the Mobile Unit that attempted to connect.
1.3.6.1.4.1.45.1.11.1.8.0.113current
ntWlanApMuWPAAuthFail
NOTIFICATION-TYPE
Indicates that WPA authentication of a Mobile Unit failed. - ifIndex identifies the radio to which the MU attempted to connect. - ntWlanDot11AssociationStationAddress is the MAC address of the Mobile Unit that attempted to connect.
1.3.6.1.4.1.45.1.11.1.8.0.114current