NETSCREEN-VR-BGP4-MIB
- Registered at
- 1.3.6.1.4.1.3224.18.6
- Last updated
- 2005-06-20 20:22
- Organization
- Juniper Networks, Inc.
- Namespace
- screenos
- Source file
NETSCREEN-VR-BGP4-MIB- Digest
sha256:9093e6f9336b64f9c8c5a0bf2fe237e0e7aa3e389b63fe04655f512e9b22a349
Description
The MIB module for NS-BGP-4.
Contact
Customer Support 1194 North Mathilda Avenue Sunnyvale, California 94089-1206 USA Tel: 1-800-638-8296 E-mail: customerservice@juniper.net HTTP://www.juniper.net
Imports
| From | Symbols |
|---|---|
| NETSCREEN-SMI | netscreenVR |
| NETSCREEN-TRAP-MIB | netscreenTrapDesc, netscreenTrapType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
NETSCREEN-SMI NETSCREEN-TRAP-MIB NETSCREEN-VR-BGP4-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| nsVrBgpInfoTable OBJECT-TYPE BGP info table. This table contains, one entry per VR, information about the BGP's Version, LocalAs and Identifier. | 1.3.6.1.4.1.3224.18.6.1 | not-accessible | current | |
| nsVrBgpInfoEntry OBJECT-TYPE Entry containing information about the BGP's Version, LocalAs and Identifier | 1.3.6.1.4.1.3224.18.6.1.1 | not-accessible | current | |
| nsVrBgpInfoVersion OBJECT-TYPE Vector of supported BGP protocol version numbers. Each peer negotiates the version from this vector. Versions are identified via the string of bits contained within this object. The first octet contains bits 0 to 7, the second octet contains bits 8 to 15, and so on, with the most significant bit referring to the lowest bit number in the octet (e.g., the MSB of the first octet refers to bit 0). If a bit, i, is present and set, then the version (i+1) of the BGP is supported. | 1.3.6.1.4.1.3224.18.6.1.1.1 | OCTET STRING (SIZE(1..255)) | read-only | current |
| nsVrBgpInfoLocalAs OBJECT-TYPE The local autonomous system number. | 1.3.6.1.4.1.3224.18.6.1.1.2 | INTEGER (0..65535) | read-only | current |
| nsVrBgpInfoIdentifier OBJECT-TYPE The BGP Identifier of local system. | 1.3.6.1.4.1.3224.18.6.1.1.3 | IpAddress | read-only | current |
| nsVrBgpInfoVRID OBJECT-TYPE Virtual Router ID. VRID range for system created VRs: [1-1024] and for user created VRs: [1025-2048] | 1.3.6.1.4.1.3224.18.6.1.1.4 | INTEGER (0..65535) | read-only | current |
| nsVrBgpPeerTable OBJECT-TYPE BGP peer table. This table contains, one entry per BGP peer, information about the connections with BGP peers. | 1.3.6.1.4.1.3224.18.6.3 | not-accessible | current | |
| nsVrBgpPeerEntry OBJECT-TYPE Entry containing information about the connection with a BGP peer. | 1.3.6.1.4.1.3224.18.6.3.1 | not-accessible | current | |
| nsVrBgpPeerIdentifier OBJECT-TYPE The BGP Identifier of this entry's BGP peer. | 1.3.6.1.4.1.3224.18.6.3.1.1 | IpAddress | read-only | current |
| nsVrBgpPeerState OBJECT-TYPE The BGP peer connection state. | 1.3.6.1.4.1.3224.18.6.3.1.2 | INTEGER {idle(1), connect(2), active(3), opensent(4), openconfirm(5), established(6)} | read-only | current |
| nsVrBgpPeerAdminStatus OBJECT-TYPE The desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A transition from 'start' to 'stop' will cause the BGP Stop Event to be generated. This parameter can be used to restart BGP peer connections. Care should be used in providing write access to this object without adequate authentication. | 1.3.6.1.4.1.3224.18.6.3.1.3 | INTEGER {stop(1), start(2)} | read-only | current |
| nsVrBgpPeerNegotiatedVersion OBJECT-TYPE The negotiated version of BGP running between the two peers. | 1.3.6.1.4.1.3224.18.6.3.1.4 | Integer32 | read-only | current |
| nsVrBgpPeerLocalAddr OBJECT-TYPE The local IP address of this entry's BGP connection. | 1.3.6.1.4.1.3224.18.6.3.1.5 | IpAddress | read-only | current |
| nsVrBgpPeerLocalPort OBJECT-TYPE The local port for the TCP connection between the BGP peers. | 1.3.6.1.4.1.3224.18.6.3.1.6 | INTEGER (0..65535) | read-only | current |
| nsVrBgpPeerRemoteAddr OBJECT-TYPE The remote IP address of this entry's BGP peer. | 1.3.6.1.4.1.3224.18.6.3.1.7 | IpAddress | read-only | current |
| nsVrBgpPeerRemotePort OBJECT-TYPE The remote port for the TCP connection between the BGP peers. Note that the objects nsVrBgpPeerLocalAddr, nsVrBgpPeerLocalPort, nsVrBgpPeerRemoteAddr and nsVrBgpPeerRemotePort provide the appropriate reference to the standard MIB TCP connection table. | 1.3.6.1.4.1.3224.18.6.3.1.8 | INTEGER (0..65535) | read-only | current |
| nsVrBgpPeerRemoteAs OBJECT-TYPE The remote autonomous system number. | 1.3.6.1.4.1.3224.18.6.3.1.9 | INTEGER (0..65535) | read-only | current |
| nsVrBgpPeerInUpdates OBJECT-TYPE The number of BGP UPDATE messages received on this connection. This object should be initialized to zero (0) when the connection is established. | 1.3.6.1.4.1.3224.18.6.3.1.10 | Counter32 | read-only | current |
| nsVrBgpPeerOutUpdates OBJECT-TYPE The number of BGP UPDATE messages transmitted on this connection. This object should be initialized to zero (0) when the connection is established. | 1.3.6.1.4.1.3224.18.6.3.1.11 | Counter32 | read-only | current |
| nsVrBgpPeerInTotalMessages OBJECT-TYPE The total number of messages received from the remote peer on this connection. This object should be initialized to zero when the connection is established. | 1.3.6.1.4.1.3224.18.6.3.1.12 | Counter32 | read-only | current |
| nsVrBgpPeerOutTotalMessages OBJECT-TYPE The total number of messages transmitted to the remote peer on this connection. This object should be initialized to zero when the connection is established. | 1.3.6.1.4.1.3224.18.6.3.1.13 | Counter32 | read-only | current |
| nsVrBgpPeerLastError OBJECT-TYPE The last error code and subcode seen by this peer on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode. | 1.3.6.1.4.1.3224.18.6.3.1.14 | OCTET STRING (SIZE(2)) | read-only | current |
| nsVrBgpPeerFsmEstablishedTransitions OBJECT-TYPE The total number of times the BGP FSM transitioned into the established state. | 1.3.6.1.4.1.3224.18.6.3.1.15 | Counter32 | read-only | current |
| nsVrBgpPeerFsmEstablishedTime OBJECT-TYPE This timer indicates how long (in seconds) this peer has been in the Established state or how long since this peer was last in the Established state. It is set to zero when a new peer is configured or the router is booted. | 1.3.6.1.4.1.3224.18.6.3.1.16 | Gauge32 | read-only | current |
| nsVrBgpPeerConnectRetryInterval OBJECT-TYPE Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds. | 1.3.6.1.4.1.3224.18.6.3.1.17 | INTEGER (1..65535) | read-only | current |
| nsVrBgpPeerHoldTime OBJECT-TYPE Time interval in seconds for the Hold Timer established with the peer. The value of this object is calculated by this BGP speaker by using the smaller of the value in nsVrBgpPeerHoldTimeConfigured and the Hold Time received in the OPEN message. This value must be at lease three seconds if it is not zero (0) in which case the Hold Timer has not been established with the peer, or, the value of nsVrBgpPeerHoldTimeConfigured is zero (0). | 1.3.6.1.4.1.3224.18.6.3.1.18 | INTEGER (0 | 3..65535) | read-only | current |
| nsVrBgpPeerKeepAlive OBJECT-TYPE Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with nsVrBgpPeerHoldTime, it has the same proportion as what nsVrBgpPeerKeepAliveConfigured has when compared with nsVrBgpPeerHoldTimeConfigured. If the value of this object is zero (0), it indicates that the KeepAlive timer has not been established with the peer, or, the value of nsVrBgpPeerKeepAliveConfigured is zero (0). | 1.3.6.1.4.1.3224.18.6.3.1.19 | INTEGER (0 | 1..21845) | read-only | current |
| nsVrBgpPeerHoldTimeConfigured OBJECT-TYPE Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (nsVrBgpPeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds. | 1.3.6.1.4.1.3224.18.6.3.1.20 | INTEGER (0 | 3..65535) | read-only | current |
| nsVrBgpPeerKeepAliveConfigured OBJECT-TYPE Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages' frequency relative to the value specified in nsVrBgpPeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by nsVrBgpPeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of nsVrBgpPeerHoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds. | 1.3.6.1.4.1.3224.18.6.3.1.21 | INTEGER (0 | 1..21845) | read-only | current |
| nsVrBgpPeerMinASOriginationInterval OBJECT-TYPE Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds. | 1.3.6.1.4.1.3224.18.6.3.1.22 | INTEGER (1..65535) | read-only | current |
| nsVrBgpPeerMinRouteAdvertisementInterval OBJECT-TYPE Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds. | 1.3.6.1.4.1.3224.18.6.3.1.23 | INTEGER (1..65535) | read-only | current |
| nsVrBgpPeerInUpdateElapsedTime OBJECT-TYPE Elapsed time in seconds since the last BGP UPDATE message was received from the peer. Each time nsVrBgpPeerInUpdates is incremented, the value of this object is set to zero (0). | 1.3.6.1.4.1.3224.18.6.3.1.24 | Gauge32 | read-only | current |
| nsVrBgpPeerVRID OBJECT-TYPE Virtual Router ID. VRID range for system created VRs: [1-1024] and for user created VRs: [1025-2048] | 1.3.6.1.4.1.3224.18.6.3.1.25 | INTEGER (0..65535) | read-only | current |
| nsVrBgp4PathAttrTable OBJECT-TYPE The BGP-4 Received Path Attribute Table contains information about paths to destination networks received from all BGP4 peers. | 1.3.6.1.4.1.3224.18.6.6 | not-accessible | current | |
| nsVrBgp4PathAttrEntry OBJECT-TYPE Information about a path to a network. | 1.3.6.1.4.1.3224.18.6.6.1 | not-accessible | current | |
| nsVrBgp4PathAttrPeer OBJECT-TYPE The IP address of the peer where the path information was learned. | 1.3.6.1.4.1.3224.18.6.6.1.1 | IpAddress | read-only | current |
| nsVrBgp4PathAttrIpAddrPrefixLen OBJECT-TYPE Length in bits of the IP address prefix in the Network Layer Reachability Information field. | 1.3.6.1.4.1.3224.18.6.6.1.2 | INTEGER (0..32) | read-only | current |
| nsVrBgp4PathAttrIpAddrPrefix OBJECT-TYPE An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by nsVrBgp4PathAttrIpAddrPrefixLen. Any bits beyond the length specified by nsVrBgp4PathAttrIpAddrPrefixLen are zeroed. | 1.3.6.1.4.1.3224.18.6.6.1.3 | IpAddress | read-only | current |
| nsVrBgp4PathAttrOrigin OBJECT-TYPE The ultimate origin of the path information. | 1.3.6.1.4.1.3224.18.6.6.1.4 | INTEGER {igp(1), egp(2), incomplete(3)} | read-only | current |
| nsVrBgp4PathAttrASPathSegment OBJECT-TYPE The sequence of AS path segments. Each AS path segment is represented by a triple <type, length, value>. The type is a 1-octet field which has two possible values: 1 AS_SET: unordered set of ASs a route in the UPDATE message has traversed 2 AS_SEQUENCE: ordered set of ASs a route in the UPDATE message has traversed. The length is a 1-octet field containing the number of ASs in the value field. The value field contains one or more AS numbers, each AS is represented in the octet string as a pair of octets according to the following algorithm: first-byte-of-pair = ASNumber / 256; second-byte-of-pair = ASNumber & 255; | 1.3.6.1.4.1.3224.18.6.6.1.5 | OCTET STRING (SIZE(2..255)) | read-only | current |
| nsVrBgp4PathAttrNextHop OBJECT-TYPE The address of the border router that should be used for the destination network. | 1.3.6.1.4.1.3224.18.6.6.1.6 | IpAddress | read-only | current |
| nsVrBgp4PathAttrMultiExitDisc OBJECT-TYPE This metric is used to discriminate between multiple exit points to an adjacent autonomous system. A value of -1 indicates the absence of this attribute. | 1.3.6.1.4.1.3224.18.6.6.1.7 | INTEGER (-1..2147483647) | read-only | current |
| nsVrBgp4PathAttrLocalPref OBJECT-TYPE The originating BGP4 speaker's degree of preference for an advertised route. A value of -1 indicates the absence of this attribute. | 1.3.6.1.4.1.3224.18.6.6.1.8 | INTEGER (-1..2147483647) | read-only | current |
| nsVrBgp4PathAttrAtomicAggregate OBJECT-TYPE Whether or not the local system has selected a less specific route without selecting a more specific route. | 1.3.6.1.4.1.3224.18.6.6.1.9 | INTEGER {lessSpecificRrouteNotSelected(1), lessSpecificRouteSelected(2)} | read-only | current |
| nsVrBgp4PathAttrAggregatorAS OBJECT-TYPE The AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. | 1.3.6.1.4.1.3224.18.6.6.1.10 | INTEGER (0..65535) | read-only | current |
| nsVrBgp4PathAttrAggregatorAddr OBJECT-TYPE The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute. | 1.3.6.1.4.1.3224.18.6.6.1.11 | IpAddress | read-only | current |
| nsVrBgp4PathAttrCalcLocalPref OBJECT-TYPE The degree of preference calculated by the receiving BGP4 speaker for an advertised route. A value of -1 indicates the absence of this attribute. | 1.3.6.1.4.1.3224.18.6.6.1.12 | INTEGER (-1..2147483647) | read-only | current |
| nsVrBgp4PathAttrBest OBJECT-TYPE An indication of whether or not this route was chosen as the best BGP4 route. | 1.3.6.1.4.1.3224.18.6.6.1.13 | INTEGER {false(1), true(2)} | read-only | current |
| nsVrBgp4PathAttrUnknown OBJECT-TYPE One or more path attributes not understood by this BGP4 speaker. Size zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size, if any, are not recorded by this object. | 1.3.6.1.4.1.3224.18.6.6.1.14 | OCTET STRING (SIZE(0..255)) | read-only | current |
| nsVrBgp4PathAttrVRID OBJECT-TYPE Virtual Router ID. VRID range for system created VRs: [1-1024] and for user created VRs: [1025-2048] | 1.3.6.1.4.1.3224.18.6.6.1.15 | INTEGER (0..65535) | read-only | current |
| nsVrBgpTraps OBJECT-IDENTITY | 1.3.6.1.4.1.3224.18.6.7 |
Notifications
| Name | OID | Status |
|---|---|---|
| nsVrBgpEstablished NOTIFICATION-TYPE The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state. | 1.3.6.1.4.1.3224.18.6.7.1 | current |