MIBs Depot

NETSCREEN-VPN-IKE-MIB

Registered at
1.3.6.1.4.1.3224.4.0.3
1.3.6.1.4.1.3224.4.3
Last updated
2004-05-03 20:22
Organization
Juniper Networks, Inc.
Revisions
2004-05-03 00:00, 2004-03-03 00:00, 2003-11-13 00:00, 2001-09-28 00:00, 2001-05-14 00:00
Namespace
screenos
Source file
NETSCREEN-VPN-IKE-MIB
Digest
sha256:f1505cd4e4d312005bf7cfd32364a102ed6aec58b926b7a4881cc5459744a217

Description

This module defines the object that are used to monitor VPN IKE info

Contact

Customer Support 1194 North Mathilda Avenue Sunnyvale, California 94089-1206 USA Tel: 1-800-638-8296 E-mail: customerservice@juniper.net HTTP://www.juniper.net

Imports

FromSymbols
NETSCREEN-SMInetscreenVpn, netscreenVpnMibModule
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

NETSCREEN-SMI
NETSCREEN-VPN-IKE-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
nsVpnIke
OBJECT-IDENTITY
1.3.6.1.4.1.3224.4.3
nsVpnIkeTable
OBJECT-TYPE
IPSec supports the automated generation and negotiation of keys and security associations using the Internet Key Exchange(IKE) protocol. This table collects the IKE configuration in NetScreen device.
1.3.6.1.4.1.3224.4.3.1not-accessiblecurrent
nsVpnIkeEntry
OBJECT-TYPE
Each entry in the nsVpnIkeTable holds a set of configuration parameters associated with an IKE.
1.3.6.1.4.1.3224.4.3.1.1not-accessiblecurrent
nsVpnIkeIndex
OBJECT-TYPE
A unique value for ike table. Its value ranges between 0 and 65535 and may not be contiguous.
1.3.6.1.4.1.3224.4.3.1.1.1Integer32 (0..2147483647)read-onlycurrent
nsVpnIkeName
OBJECT-TYPE
Each IKE configuration can have a readable name.
1.3.6.1.4.1.3224.4.3.1.1.2DisplayString (SIZE(0..32))read-onlycurrent
nsVpnIkeReplayProc
OBJECT-TYPE
Enable Replay Protection
1.3.6.1.4.1.3224.4.3.1.1.3INTEGER {disable(0), enabled(1)}read-onlycurrent
nsVpnIkeGWTun
OBJECT-TYPE
Remote Gateway Tunnel Name
1.3.6.1.4.1.3224.4.3.1.1.4DisplayString (SIZE(0..32))read-onlycurrent
nsVpnIkePh2ProOne
OBJECT-TYPE
Phase 2 Proposal one
1.3.6.1.4.1.3224.4.3.1.1.5DisplayString (SIZE(0..32))read-onlycurrent
nsVpnIkePh2ProTwo
OBJECT-TYPE
Phase 2 Proposal two
1.3.6.1.4.1.3224.4.3.1.1.6DisplayString (SIZE(0..32))read-onlycurrent
nsVpnIkePh2ProThree
OBJECT-TYPE
Phase 2 Proposal three
1.3.6.1.4.1.3224.4.3.1.1.7DisplayString (SIZE(0..32))read-onlycurrent
nsVpnIkePh2ProFour
OBJECT-TYPE
Phase 2 Proposal four
1.3.6.1.4.1.3224.4.3.1.1.8DisplayString (SIZE(0..32))read-onlycurrent
nsVpnIkeMonitorEnable
OBJECT-TYPE
Enable to monitor VPN tunnel's link status.
1.3.6.1.4.1.3224.4.3.1.1.9INTEGER {disable(0), enabled(1)}read-onlycurrent
nsVpnIkeTransMode
OBJECT-TYPE
Transport Mode Enable (For L2TP-over-IPSec only)
1.3.6.1.4.1.3224.4.3.1.1.10INTEGER {disable(0), enabled(1)}read-onlycurrent
nsVpnIkeVsys
OBJECT-TYPE
vsys the configuration belongs to.
1.3.6.1.4.1.3224.4.3.1.1.11Integer32read-onlycurrent