NETSCREEN-SET-LOG-MIB

Registered at: 1.3.6.1.4.1.3224.7.0.8

1.3.6.1.4.1.3224.7.8
Last updated: 2004-05-03 20:22
Organization: Juniper Networks, Inc.
Revisions: 2004-05-03 00:00, 2004-03-03 00:00, 2003-11-10 00:00, 2001-09-28 00:00, 2001-05-27 00:00
Namespace: screenos
Source file: NETSCREEN-SET-LOG-MIB
Digest: sha256:f52e8f86d81cc8a8b78c96f70f1a462fc1044ad4e8e8617ca71be6f5022a0cea

Description

This module defines the object that are used to monitor syslog setting

Contact

Customer Support 1194 North Mathilda Avenue Sunnyvale, California 94089-1206 USA Tel: 1-800-638-8296 E-mail: customerservice@juniper.net HTTP://www.juniper.net

Imports

From	Symbols
NETSCREEN-SMI	`netscreenSetting, netscreenSettingMibModule`
SNMPv2-CONF	`MODULE-COMPLIANCE, NOTIFICATION-GROUP`
SNMPv2-SMI	`Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso`
SNMPv2-TC	`DisplayString, TEXTUAL-CONVENTION`

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

NETSCREEN-SET-LOG-MIB
NETSCREEN-SMI
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

Name	OID	Syntax	Access	Status
nsSetLog OBJECT-IDENTITY	1.3.6.1.4.1.3224.7.8
nsSetLogEnable OBJECT-TYPE Enable Syslog messages	1.3.6.1.4.1.3224.7.8.1	INTEGER {disable(0), enabled(1)}	read-only	current
nsSetLogVPNEnable OBJECT-TYPE Secure syslog message traffic using VPN encryption	1.3.6.1.4.1.3224.7.8.2	INTEGER {disable(0), enabled(1)}	read-only	current
nsSetLogTraffic OBJECT-TYPE Including traffic log when recording administration log	1.3.6.1.4.1.3224.7.8.3	INTEGER {disable(0), enabled(1)}	read-only	current
nsSetLogHostName OBJECT-TYPE syslog server name or ip address	1.3.6.1.4.1.3224.7.8.4	DisplayString (SIZE(0..32))	read-only	current
nsSetLogPort OBJECT-TYPE syslog server port number	1.3.6.1.4.1.3224.7.8.5	Integer32	read-only	current
nsSetLogSecFacility OBJECT-TYPE Security Facility of syslog server	1.3.6.1.4.1.3224.7.8.6	INTEGER {auth-sec(4), local0(16), local1(17), local2(18), local3(19), local4(20), local5(21), local6(22), local7(23)}	read-only	current
nsSetLogFacility OBJECT-TYPE Facility of syslog server	1.3.6.1.4.1.3224.7.8.7	INTEGER {auth-sec(4), local0(16), local1(17), local2(18), local3(19), local4(20), lcoal5(21), local6(22), loca7(23)}	read-only	current
nsSetLogLevel OBJECT-TYPE Only log messages with a priority level of EMERGENCY/ALERT/CRITICAL/ERROR/WARNING/NOTICE/INFO/DEBUG or higher	1.3.6.1.4.1.3224.7.8.8	INTEGER {emergency(0), aleart(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7)}	read-only	current
nsSetLogWebTrendsEnable OBJECT-TYPE Enable WebTrends Firewall syslog report.	1.3.6.1.4.1.3224.7.8.9	INTEGER {disable(0), enabled(1)}	read-only	current
nsSetLogWebTrendsVPNEnable OBJECT-TYPE Secure WebTrends message via VPN encryption	1.3.6.1.4.1.3224.7.8.10	INTEGER {disable(0), enabled(1)}	read-only	current
nsSetLogWebTrendsHostName OBJECT-TYPE WebTrends Host Name	1.3.6.1.4.1.3224.7.8.11	DisplayString (SIZE(0..32))	read-only	current
nsSetLogWebTrendsPort OBJECT-TYPE WebTrends Host Port	1.3.6.1.4.1.3224.7.8.12	Integer32	read-only	current