MIBs Depot

NETSCREEN-OSPF-TRAP-MIB

Registered at
1.3.6.1.4.1.3224.18.2.16
Last updated
2004-05-03 20:22
Organization
Juniper Networks, Inc.
Namespace
screenos
Source file
NETSCREEN-OSPF-TRAP-MIB
Digest
sha256:c9f86ef57affbebecc56c5784c6a2302e02bbea8df7af15de61f8fc532b5ba7e

Description

The MIB module to describe traps for the OSPF Version 2 Protocol.

Contact

Customer Support 1194 North Mathilda Avenue Sunnyvale, California 94089-1206 USA Tel: 1-800-638-8296 E-mail: customerservice@juniper.net HTTP://www.juniper.net

Imports

FromSymbols
NETSCREEN-OSPF-MIBnsOspf, nsOspfAddressLessIf, nsOspfExtLsdbLimit, nsOspfIfIpAddress, nsOspfIfState, nsOspfLsdbAreaId, nsOspfLsdbLsid, nsOspfLsdbRouterId, nsOspfLsdbType, nsOspfNbrAddressLessIndex, nsOspfNbrIpAddr, nsOspfNbrRtrId, nsOspfNbrState, nsOspfRouterId, nsOspfVirtIfAreaId, nsOspfVirtIfNeighbor, nsOspfVirtIfState, nsOspfVirtNbrArea, nsOspfVirtNbrRtrId, nsOspfVirtNbrState
NETSCREEN-TRAP-MIBnetscreenTrapDesc, netscreenTrapType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIIpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

NETSCREEN-OSPF-MIB
NETSCREEN-OSPF-TRAP-MIB
NETSCREEN-SMI
NETSCREEN-TRAP-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
nsOspfTrapControl
OBJECT-IDENTITY
1.3.6.1.4.1.3224.18.2.16.1
nsOspfSetTrap
OBJECT-TYPE
A four-octet string serving as a bit map for the trap events defined by the OSPF traps. This object is used to enable and disable specific OSPF traps where a 1 in the bit field represents enabled. The right-most bit (least significant) represents trap 0.
1.3.6.1.4.1.3224.18.2.16.1.1OCTET STRING (SIZE(4))read-onlycurrent
nsOspfConfigErrorType
OBJECT-TYPE
Potential types of configuration conflicts. Used by the nsOspfConfigError and nsOspfConfigVir- tError traps.
1.3.6.1.4.1.3224.18.2.16.1.2INTEGER {badVersion(1), areaMismatch(2), unknownNbmaNbr(3), unknownVirtualNbr(4), authTypeMismatch(5), authFailure(6), netMaskMismatch(7), helloIntervalMismatch(8), deadIntervalMismatch(9), optionMismatch(10)}read-onlycurrent
nsOspfPacketType
OBJECT-TYPE
OSPF packet types.
1.3.6.1.4.1.3224.18.2.16.1.3INTEGER {hello(1), dbDescript(2), lsReq(3), lsUpdate(4), lsAck(5)}read-onlycurrent
nsOspfPacketSrc
OBJECT-TYPE
The IP address of an inbound packet that can- not be identified by a neighbor instance.
1.3.6.1.4.1.3224.18.2.16.1.4IpAddressread-onlycurrent
nsOspfTraps
OBJECT-IDENTITY
1.3.6.1.4.1.3224.18.2.16.2

Notifications

NameOIDStatus
nsOspfVirtIfStateChange
NOTIFICATION-TYPE
An nsOspfIfStateChange trap signifies that there has been a change in the state of an OSPF vir- tual interface. This trap should be generated when the inter- face state regresses (e.g., goes from Point- to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point).
1.3.6.1.4.1.3224.18.2.16.2.1current
nsOspfNbrStateChange
NOTIFICATION-TYPE
An nsOspfNbrStateChange trap signifies that there has been a change in the state of a non- virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full). When an neighbor transitions from or to Full on non-broadcast multi-access and broadcast networks, the trap should be gen- erated by the designated router. A designated router transitioning to Down will be noted by nsOspfIfStateChange.
1.3.6.1.4.1.3224.18.2.16.2.2current
nsOspfVirtNbrStateChange
NOTIFICATION-TYPE
An nsOspfIfStateChange trap signifies that there has been a change in the state of an OSPF vir- tual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).
1.3.6.1.4.1.3224.18.2.16.2.3current
nsOspfIfConfigError
NOTIFICATION-TYPE
An nsOspfIfConfigError trap signifies that a packet has been received on a non-virtual in- terface from a router whose configuration parameters conflict with this router's confi- guration parameters. Note that the event op- tionMismatch should cause a trap only if it prevents an adjacency from forming.
1.3.6.1.4.1.3224.18.2.16.2.4current
nsOspfVirtIfConfigError
NOTIFICATION-TYPE
An nsOspfConfigError trap signifies that a pack- et has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters. Note that the event optionMismatch should cause a trap only if it prevents an ad- jacency from forming.
1.3.6.1.4.1.3224.18.2.16.2.5current
nsOspfIfAuthFailure
NOTIFICATION-TYPE
An nsOspfIfAuthFailure trap signifies that a packet has been received on a non-virtual in- terface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.
1.3.6.1.4.1.3224.18.2.16.2.6current
nsOspfVirtIfAuthFailure
NOTIFICATION-TYPE
An nsOspfVirtIfAuthFailure trap signifies that a packet has been received on a virtual interface from a router whose authentication key or au- thentication type conflicts with this router's authentication key or authentication type.
1.3.6.1.4.1.3224.18.2.16.2.7current
nsOspfIfRxBadPacket
NOTIFICATION-TYPE
An nsOspfIfRxBadPacket trap signifies that an OSPF packet has been received on a non-virtual interface that cannot be parsed.
1.3.6.1.4.1.3224.18.2.16.2.8current
nsOspfVirtIfRxBadPacket
NOTIFICATION-TYPE
An nsOspfRxBadPacket trap signifies that an OSPF packet has been received on a virtual interface that cannot be parsed.
1.3.6.1.4.1.3224.18.2.16.2.9current
nsOspfTxRetransmit
NOTIFICATION-TYPE
An nsOspfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a non- virtual interface. All packets that may be re- transmitted are associated with an LSDB entry. The LS type, LS ID, and Router ID are used to identify the LSDB entry.
1.3.6.1.4.1.3224.18.2.16.2.10current
nsOspfVirtIfTxRetransmit
NOTIFICATION-TYPE
An nsOspfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a virtual interface. All packets that may be retransmit- ted are associated with an LSDB entry. The LS type, LS ID, and Router ID are used to identify the LSDB entry.
1.3.6.1.4.1.3224.18.2.16.2.11current
nsOspfOriginateLsa
NOTIFICATION-TYPE
An nsOspfOriginateLsa trap signifies that a new LSA has been originated by this router. This trap should not be invoked for simple refreshes of LSAs (which happesn every 30 minutes), but instead will only be invoked when an LSA is (re)originated due to a topology change. Addi- tionally, this trap does not include LSAs that are being flushed because they have reached MaxAge.
1.3.6.1.4.1.3224.18.2.16.2.12current
nsOspfMaxAgeLsa
NOTIFICATION-TYPE
An nsOspfMaxAgeLsa trap signifies that one of the LSA in the router's link-state database has aged to MaxAge.
1.3.6.1.4.1.3224.18.2.16.2.13current
nsOspfLsdbOverflow
NOTIFICATION-TYPE
An nsOspfLsdbOverflow trap signifies that the number of LSAs in the router's link-state data- base has exceeded nsOspfExtLsdbLimit.
1.3.6.1.4.1.3224.18.2.16.2.14current
nsOspfLsdbApproachingOverflow
NOTIFICATION-TYPE
An nsOspfLsdbApproachingOverflow trap signifies that the number of LSAs in the router's link- state database has exceeded ninety percent of nsOspfExtLsdbLimit.
1.3.6.1.4.1.3224.18.2.16.2.15current
nsOspfIfStateChange
NOTIFICATION-TYPE
An nsOspfIfStateChange trap signifies that there has been a change in the state of a non-virtual OSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup).
1.3.6.1.4.1.3224.18.2.16.2.16current