NETSCREEN-BGP4-MIB
- Registered at
- 1.3.6.1.4.1.3224.18.3
- Last updated
- 2005-06-03 20:22
- Organization
- Juniper Networks, Inc.
- Namespace
- screenos
- Source file
NETSCREEN-BGP4-MIB- Digest
sha256:b04a083d1759de8ead18342a03cda480d0d79f3769eb1b1118d7e39a574e587a
Description
The MIB module for NS-BGP-4.
Contact
Customer Support 1194 North Mathilda Avenue Sunnyvale, California 94089-1206 USA Tel: 1-800-638-8296 E-mail: customerservice@juniper.net HTTP://www.juniper.net
Imports
| From | Symbols |
|---|---|
| NETSCREEN-SMI | netscreenVR |
| NETSCREEN-TRAP-MIB | netscreenTrapDesc, netscreenTrapType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
NETSCREEN-BGP4-MIB NETSCREEN-SMI NETSCREEN-TRAP-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| nsBgpInfoTable OBJECT-TYPE BGP info table. This table contains, one entry per VR, information about the BGP's Version, LocalAs and Identifier. | 1.3.6.1.4.1.3224.18.3.1 | not-accessible | deprecated | |
| nsBgpInfoEntry OBJECT-TYPE Entry containing information about the BGP's Version, LocalAs and Identifier | 1.3.6.1.4.1.3224.18.3.1.1 | not-accessible | deprecated | |
| nsBgpInfoVersion OBJECT-TYPE Vector of supported BGP protocol version numbers. Each peer negotiates the version from this vector. Versions are identified via the string of bits contained within this object. The first octet contains bits 0 to 7, the second octet contains bits 8 to 15, and so on, with the most significant bit referring to the lowest bit number in the octet (e.g., the MSB of the first octet refers to bit 0). If a bit, i, is present and set, then the version (i+1) of the BGP is supported. | 1.3.6.1.4.1.3224.18.3.1.1.1 | OCTET STRING (SIZE(1..255)) | read-only | deprecated |
| nsBgpInfoLocalAs OBJECT-TYPE The local autonomous system number. | 1.3.6.1.4.1.3224.18.3.1.1.2 | INTEGER (0..65535) | read-only | deprecated |
| nsBgpInfoIdentifier OBJECT-TYPE The BGP Identifier of local system. | 1.3.6.1.4.1.3224.18.3.1.1.3 | IpAddress | read-only | deprecated |
| nsBgpInfoVRID OBJECT-TYPE Virtual Router ID | 1.3.6.1.4.1.3224.18.3.1.1.4 | INTEGER (0..65535) | read-only | deprecated |
| nsBgpPeerTable OBJECT-TYPE BGP peer table. This table contains, one entry per BGP peer, information about the connections with BGP peers. | 1.3.6.1.4.1.3224.18.3.3 | not-accessible | deprecated | |
| nsBgpPeerEntry OBJECT-TYPE Entry containing information about the connection with a BGP peer. | 1.3.6.1.4.1.3224.18.3.3.1 | not-accessible | deprecated | |
| nsBgpPeerIdentifier OBJECT-TYPE The BGP Identifier of this entry's BGP peer. | 1.3.6.1.4.1.3224.18.3.3.1.1 | IpAddress | read-only | deprecated |
| nsBgpPeerState OBJECT-TYPE The BGP peer connection state. | 1.3.6.1.4.1.3224.18.3.3.1.2 | INTEGER {idle(1), connect(2), active(3), opensent(4), openconfirm(5), established(6)} | read-only | deprecated |
| nsBgpPeerAdminStatus OBJECT-TYPE The desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A transition from 'start' to 'stop' will cause the BGP Stop Event to be generated. This parameter can be used to restart BGP peer connections. Care should be used in providing write access to this object without adequate authentication. | 1.3.6.1.4.1.3224.18.3.3.1.3 | INTEGER {stop(1), start(2)} | read-only | deprecated |
| nsBgpPeerNegotiatedVersion OBJECT-TYPE The negotiated version of BGP running between the two peers. | 1.3.6.1.4.1.3224.18.3.3.1.4 | Integer32 | read-only | deprecated |
| nsBgpPeerLocalAddr OBJECT-TYPE The local IP address of this entry's BGP connection. | 1.3.6.1.4.1.3224.18.3.3.1.5 | IpAddress | read-only | deprecated |
| nsBgpPeerLocalPort OBJECT-TYPE The local port for the TCP connection between the BGP peers. | 1.3.6.1.4.1.3224.18.3.3.1.6 | INTEGER (0..65535) | read-only | deprecated |
| nsBgpPeerRemoteAddr OBJECT-TYPE The remote IP address of this entry's BGP peer. | 1.3.6.1.4.1.3224.18.3.3.1.7 | IpAddress | read-only | deprecated |
| nsBgpPeerRemotePort OBJECT-TYPE The remote port for the TCP connection between the BGP peers. Note that the objects nsBgpPeerLocalAddr, nsBgpPeerLocalPort, nsBgpPeerRemoteAddr and nsBgpPeerRemotePort provide the appropriate reference to the standard MIB TCP connection table. | 1.3.6.1.4.1.3224.18.3.3.1.8 | INTEGER (0..65535) | read-only | deprecated |
| nsBgpPeerRemoteAs OBJECT-TYPE The remote autonomous system number. | 1.3.6.1.4.1.3224.18.3.3.1.9 | INTEGER (0..65535) | read-only | deprecated |
| nsBgpPeerInUpdates OBJECT-TYPE The number of BGP UPDATE messages received on this connection. This object should be initialized to zero (0) when the connection is established. | 1.3.6.1.4.1.3224.18.3.3.1.10 | Counter32 | read-only | deprecated |
| nsBgpPeerOutUpdates OBJECT-TYPE The number of BGP UPDATE messages transmitted on this connection. This object should be initialized to zero (0) when the connection is established. | 1.3.6.1.4.1.3224.18.3.3.1.11 | Counter32 | read-only | deprecated |
| nsBgpPeerInTotalMessages OBJECT-TYPE The total number of messages received from the remote peer on this connection. This object should be initialized to zero when the connection is established. | 1.3.6.1.4.1.3224.18.3.3.1.12 | Counter32 | read-only | deprecated |
| nsBgpPeerOutTotalMessages OBJECT-TYPE The total number of messages transmitted to the remote peer on this connection. This object should be initialized to zero when the connection is established. | 1.3.6.1.4.1.3224.18.3.3.1.13 | Counter32 | read-only | deprecated |
| nsBgpPeerLastError OBJECT-TYPE The last error code and subcode seen by this peer on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode. | 1.3.6.1.4.1.3224.18.3.3.1.14 | OCTET STRING (SIZE(2)) | read-only | deprecated |
| nsBgpPeerFsmEstablishedTransitions OBJECT-TYPE The total number of times the BGP FSM transitioned into the established state. | 1.3.6.1.4.1.3224.18.3.3.1.15 | Counter32 | read-only | deprecated |
| nsBgpPeerFsmEstablishedTime OBJECT-TYPE This timer indicates how long (in seconds) this peer has been in the Established state or how long since this peer was last in the Established state. It is set to zero when a new peer is configured or the router is booted. | 1.3.6.1.4.1.3224.18.3.3.1.16 | Gauge32 | read-only | deprecated |
| nsBgpPeerConnectRetryInterval OBJECT-TYPE Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds. | 1.3.6.1.4.1.3224.18.3.3.1.17 | INTEGER (1..65535) | read-only | deprecated |
| nsBgpPeerHoldTime OBJECT-TYPE Time interval in seconds for the Hold Timer established with the peer. The value of this object is calculated by this BGP speaker by using the smaller of the value in nsBgpPeerHoldTimeConfigured and the Hold Time received in the OPEN message. This value must be at lease three seconds if it is not zero (0) in which case the Hold Timer has not been established with the peer, or, the value of nsBgpPeerHoldTimeConfigured is zero (0). | 1.3.6.1.4.1.3224.18.3.3.1.18 | INTEGER (0 | 3..65535) | read-only | deprecated |
| nsBgpPeerKeepAlive OBJECT-TYPE Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with nsBgpPeerHoldTime, it has the same proportion as what nsBgpPeerKeepAliveConfigured has when compared with nsBgpPeerHoldTimeConfigured. If the value of this object is zero (0), it indicates that the KeepAlive timer has not been established with the peer, or, the value of nsBgpPeerKeepAliveConfigured is zero (0). | 1.3.6.1.4.1.3224.18.3.3.1.19 | INTEGER (0 | 1..21845) | read-only | deprecated |
| nsBgpPeerHoldTimeConfigured OBJECT-TYPE Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (nsBgpPeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds. | 1.3.6.1.4.1.3224.18.3.3.1.20 | INTEGER (0 | 3..65535) | read-only | deprecated |
| nsBgpPeerKeepAliveConfigured OBJECT-TYPE Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages' frequency relative to the value specified in nsBgpPeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by nsBgpPeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of nsBgpPeerHoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds. | 1.3.6.1.4.1.3224.18.3.3.1.21 | INTEGER (0 | 1..21845) | read-only | deprecated |
| nsBgpPeerMinASOriginationInterval OBJECT-TYPE Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds. | 1.3.6.1.4.1.3224.18.3.3.1.22 | INTEGER (1..65535) | read-only | deprecated |
| nsBgpPeerMinRouteAdvertisementInterval OBJECT-TYPE Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds. | 1.3.6.1.4.1.3224.18.3.3.1.23 | INTEGER (1..65535) | read-only | deprecated |
| nsBgpPeerInUpdateElapsedTime OBJECT-TYPE Elapsed time in seconds since the last BGP UPDATE message was received from the peer. Each time nsBgpPeerInUpdates is incremented, the value of this object is set to zero (0). | 1.3.6.1.4.1.3224.18.3.3.1.24 | Gauge32 | read-only | deprecated |
| nsBgpPeerVRID OBJECT-TYPE Virtual Router ID | 1.3.6.1.4.1.3224.18.3.3.1.25 | INTEGER (0..65535) | read-only | deprecated |
| nsBgp4PathAttrTable OBJECT-TYPE The BGP-4 Received Path Attribute Table contains information about paths to destination networks received from all BGP4 peers. | 1.3.6.1.4.1.3224.18.3.6 | not-accessible | deprecated | |
| nsBgp4PathAttrEntry OBJECT-TYPE Information about a path to a network. | 1.3.6.1.4.1.3224.18.3.6.1 | not-accessible | deprecated | |
| nsBgp4PathAttrPeer OBJECT-TYPE The IP address of the peer where the path information was learned. | 1.3.6.1.4.1.3224.18.3.6.1.1 | IpAddress | read-only | deprecated |
| nsBgp4PathAttrIpAddrPrefixLen OBJECT-TYPE Length in bits of the IP address prefix in the Network Layer Reachability Information field. | 1.3.6.1.4.1.3224.18.3.6.1.2 | INTEGER (0..32) | read-only | deprecated |
| nsBgp4PathAttrIpAddrPrefix OBJECT-TYPE An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by nsBgp4PathAttrIpAddrPrefixLen. Any bits beyond the length specified by nsBgp4PathAttrIpAddrPrefixLen are zeroed. | 1.3.6.1.4.1.3224.18.3.6.1.3 | IpAddress | read-only | deprecated |
| nsBgp4PathAttrOrigin OBJECT-TYPE The ultimate origin of the path information. | 1.3.6.1.4.1.3224.18.3.6.1.4 | INTEGER {igp(1), egp(2), incomplete(3)} | read-only | deprecated |
| nsBgp4PathAttrASPathSegment OBJECT-TYPE The sequence of AS path segments. Each AS path segment is represented by a triple <type, length, value>. The type is a 1-octet field which has two possible values: 1 AS_SET: unordered set of ASs a route in the UPDATE message has traversed 2 AS_SEQUENCE: ordered set of ASs a route in the UPDATE message has traversed. The length is a 1-octet field containing the number of ASs in the value field. The value field contains one or more AS numbers, each AS is represented in the octet string as a pair of octets according to the following algorithm: first-byte-of-pair = ASNumber / 256; second-byte-of-pair = ASNumber & 255; | 1.3.6.1.4.1.3224.18.3.6.1.5 | OCTET STRING (SIZE(2..255)) | read-only | deprecated |
| nsBgp4PathAttrNextHop OBJECT-TYPE The address of the border router that should be used for the destination network. | 1.3.6.1.4.1.3224.18.3.6.1.6 | IpAddress | read-only | deprecated |
| nsBgp4PathAttrMultiExitDisc OBJECT-TYPE This metric is used to discriminate between multiple exit points to an adjacent autonomous system. A value of -1 indicates the absence of this attribute. | 1.3.6.1.4.1.3224.18.3.6.1.7 | INTEGER (-1..2147483647) | read-only | deprecated |
| nsBgp4PathAttrLocalPref OBJECT-TYPE The originating BGP4 speaker's degree of preference for an advertised route. A value of -1 indicates the absence of this attribute. | 1.3.6.1.4.1.3224.18.3.6.1.8 | INTEGER (-1..2147483647) | read-only | deprecated |
| nsBgp4PathAttrAtomicAggregate OBJECT-TYPE Whether or not the local system has selected a less specific route without selecting a more specific route. | 1.3.6.1.4.1.3224.18.3.6.1.9 | INTEGER {lessSpecificRrouteNotSelected(1), lessSpecificRouteSelected(2)} | read-only | deprecated |
| nsBgp4PathAttrAggregatorAS OBJECT-TYPE The AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. | 1.3.6.1.4.1.3224.18.3.6.1.10 | INTEGER (0..65535) | read-only | deprecated |
| nsBgp4PathAttrAggregatorAddr OBJECT-TYPE The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute. | 1.3.6.1.4.1.3224.18.3.6.1.11 | IpAddress | read-only | deprecated |
| nsBgp4PathAttrCalcLocalPref OBJECT-TYPE The degree of preference calculated by the receiving BGP4 speaker for an advertised route. A value of -1 indicates the absence of this attribute. | 1.3.6.1.4.1.3224.18.3.6.1.12 | INTEGER (-1..2147483647) | read-only | deprecated |
| nsBgp4PathAttrBest OBJECT-TYPE An indication of whether or not this route was chosen as the best BGP4 route. | 1.3.6.1.4.1.3224.18.3.6.1.13 | INTEGER {false(1), true(2)} | read-only | deprecated |
| nsBgp4PathAttrUnknown OBJECT-TYPE One or more path attributes not understood by this BGP4 speaker. Size zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size, if any, are not recorded by this object. | 1.3.6.1.4.1.3224.18.3.6.1.14 | OCTET STRING (SIZE(0..255)) | read-only | deprecated |
| nsBgp4PathAttrVRID OBJECT-TYPE Virtual Router ID | 1.3.6.1.4.1.3224.18.3.6.1.15 | INTEGER (0..65535) | read-only | deprecated |
| nsBgpTraps OBJECT-IDENTITY | 1.3.6.1.4.1.3224.18.3.7 |
Notifications
| Name | OID | Status |
|---|---|---|
| nsBgpEstablished NOTIFICATION-TYPE The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state. | 1.3.6.1.4.1.3224.18.3.7.1 | deprecated |