NETI-PM-MIB
- Registered at
- 1.3.6.1.4.1.2928.6.2.17
- Last updated
- 2008-12-12 12:00
- Organization
- Net Insight AB
- Revisions
- 2008-12-12 12:00
- Namespace
- netinsight
- Source file
NETI-PM-MIB- Digest
sha256:b7414df2550f22c943c00c49cb8637b4819f2afafb1d8dbba101f3d09bb867e1
Description
The Net Insight PM (Performance Monitoring) MIB. The MIB implements objects for monitoring the performance of trunk interfaces, access interfaces and channels according to G.826.
Contact
Net Insight AB Box 42093 SE-126 14 Stockholm Sweden Tel +46-8-685 0400 info@netinsight.net
Imports
| From | Symbols |
|---|---|
| NETI-COMMON-MIB | netiExperimentalGeneric |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
NETI-COMMON-MIB NETI-PM-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| Counter15m TEXTUAL-CONVENTION | current | |||
| Counter24h TEXTUAL-CONVENTION | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| netiPMMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.2928.6.2.17.1 | |||
| pmTifGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2928.6.2.17.1.1 | |||
| pmTifTable OBJECT-TYPE Table of Performance Monitored trunk interfaces | 1.3.6.1.4.1.2928.6.2.17.1.1.1 | not-accessible | current | |
| pmTifEntry OBJECT-TYPE One entry for each trunk interface | 1.3.6.1.4.1.2928.6.2.17.1.1.1.1 | not-accessible | current | |
| pmTifIndex OBJECT-TYPE The index uniquely identifying this trunk interface. | 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.1 | Unsigned32 | not-accessible | current |
| pmTifAdminStatus OBJECT-TYPE The desired state of the PM function. Affects the operative state of the PM object | 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.2 | INTEGER {up(1), down(2)} | read-write | current |
| pmTifOperStatus OBJECT-TYPE PM operative state. | 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.3 | INTEGER {up(1), down(2)} | read-only | current |
| pmTifFailure OBJECT-TYPE Shows current failure state. An empty string indicates no failure | 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.4 | DisplayString | read-only | current |
| pmTifDataSource OBJECT-TYPE The PM Data Source object | 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.5 | OBJECT IDENTIFIER | read-only | current |
| pmTifDataSourceName OBJECT-TYPE The name of the PM Data Source | 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.6 | DisplayString | read-only | current |
| pmTifUatAlarmsEnabled OBJECT-TYPE If set to `true(1)' then UAT alarms will be sent. Unavailable time (UAT) defines a state where a service is unable to perform its normal task due to severe errors for a longer period. It begins at detection of ten consecutive SES events and ends at detection of ten consecutive non-SES events. In both cases, the 10s are considered part of unavailable respective available time and effects the visibility of G.826 PM events (they are delayed 10s) Entry and exit of UAT is declared by raising and clearing an UAT alarm (if enabled) | 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.7 | TruthValue | read-write | current |
| pmTifTresholdAlarmsEnabled OBJECT-TYPE If set to `true(1)' then threshold alarms will be sent. Each 15m and 24h current register counter can be assigned a threshold value. When crossed, a threshold crossing alarm will be sent for the interval if enabled. Raised alarm will be cleared at end of a following fault free interval i.e. one with all interval counter values below their threshold values and with no UAT. Only one TC alarm per interval can be raised, regardless of how many thresholds have been crossed. | 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.8 | TruthValue | read-write | current |
| pmTifPeriodicEventsEnabled OBJECT-TYPE If set to `true(1)' then History Periodic Events will be sent. | 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.9 | TruthValue | read-write | current |
| pmTifZeroSuppressionEnabled OBJECT-TYPE If set to `true(1)' then Zero Suppression mode is enabled Zero Suppression mode tells whether intervals with all current counters equal to zero shall be stored in the history log or not. If enabled, once a faulty interval is found, its current register content including a zero suppressed interval counter will be stored in the history log. The additional counter specifies how many fault free intervals have preceded the faulty one. In such way, history for a larger measurement period can be logged than would otherwise be possible | 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.10 | TruthValue | read-write | current |
| pmTifHistorySize OBJECT-TYPE The size of the history log | 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.11 | INTEGER {none(1), small(2), large(3)} | read-write | current |
| pmTif15mTresholdES OBJECT-TYPE 15 minute threshold value for ES. Current ES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. | 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.12 | Counter15m | read-write | current |
| pmTif15mTresholdSES OBJECT-TYPE 15 minute threshold value for SES. Current SES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. | 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.13 | Counter15m | read-write | current |
| pmTif15mTresholdBBE OBJECT-TYPE 15 minute threshold value for BBE. Current BBE value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. | 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.14 | Gauge32 | read-write | current |
| pmTif15mTresholdSS OBJECT-TYPE 15 minute threshold value for SS. Current SS value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. | 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.15 | Counter15m | read-write | current |
| pmTif24hTresholdES OBJECT-TYPE 24 hour threshold value for ES. Current ES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. | 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.16 | Counter24h | read-write | current |
| pmTif24hTresholdSES OBJECT-TYPE 24 hour threshold value for SES. Current SES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. | 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.17 | Counter24h | read-write | current |
| pmTif24hTresholdBBE OBJECT-TYPE 24 hour threshold value for BBE. Current BBE value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. | 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.18 | Gauge32 | read-write | current |
| pmTif24hTresholdSS OBJECT-TYPE 24 hour threshold value for SS. Current SS value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. | 1.3.6.1.4.1.2928.6.2.17.1.1.1.1.19 | Counter24h | read-write | current |
| pmTifCurrentTable OBJECT-TYPE Table of PM data for the current 15 minute period | 1.3.6.1.4.1.2928.6.2.17.1.1.2 | not-accessible | current | |
| pmTifCurrentEntry OBJECT-TYPE One entry for each monitored object | 1.3.6.1.4.1.2928.6.2.17.1.1.2.1 | not-accessible | current | |
| pmTifCurrentTime OBJECT-TYPE Elapsed time in seconds for the current 15 minute period. | 1.3.6.1.4.1.2928.6.2.17.1.1.2.1.2 | Counter15m | read-only | current |
| pmTifCurrentSuspect OBJECT-TYPE Is Suspect flag, if set to `true(1)' the current 15 minute measurement period has unreliable measurement data. | 1.3.6.1.4.1.2928.6.2.17.1.1.2.1.3 | TruthValue | read-only | current |
| pmTifCurrentZS OBJECT-TYPE Zero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one. | 1.3.6.1.4.1.2928.6.2.17.1.1.2.1.4 | Counter32 | read-only | current |
| pmTifCurrentESs OBJECT-TYPE Number of Errored Seconds (ES) for the current 15 minute period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defect | 1.3.6.1.4.1.2928.6.2.17.1.1.2.1.5 | Counter15m | read-only | current |
| pmTifCurrentSESs OBJECT-TYPE Number of Severe Errored Seconds (SES) for the current 15 minute period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect. | 1.3.6.1.4.1.2928.6.2.17.1.1.2.1.6 | Counter15m | read-only | current |
| pmTifCurrentBBEs OBJECT-TYPE Number of Background Block Error (BBE) for the current 15 minute period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SES | 1.3.6.1.4.1.2928.6.2.17.1.1.2.1.7 | Gauge32 | read-only | current |
| pmTifCurrentUASs OBJECT-TYPE Number of Unavailable Second (UAS) for the current 15 minute period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them is performed | 1.3.6.1.4.1.2928.6.2.17.1.1.2.1.8 | Counter15m | read-only | current |
| pmTifCurrentSSs OBJECT-TYPE Number of SLIP Second (SS) for the current 15 minute period. SS is defined as one second containing one or more SLIPs | 1.3.6.1.4.1.2928.6.2.17.1.1.2.1.9 | Counter15m | read-only | current |
| pmTif15mTable OBJECT-TYPE Table of 15 minute PM log history | 1.3.6.1.4.1.2928.6.2.17.1.1.3 | not-accessible | current | |
| pmTif15mEntry OBJECT-TYPE One entry for each 15 minute PM interval | 1.3.6.1.4.1.2928.6.2.17.1.1.3.1 | not-accessible | current | |
| pmTif15mIndex OBJECT-TYPE The index that identifies the interval for which the set of statistics is available. Index of '0' indicates the most recently completed interval, and the index is increased by one for each interval back in time. | 1.3.6.1.4.1.2928.6.2.17.1.1.3.1.1 | Unsigned32 | not-accessible | current |
| pmTif15mTime OBJECT-TYPE Time stamp for this 15 minute interval | 1.3.6.1.4.1.2928.6.2.17.1.1.3.1.2 | DateAndTime | read-only | current |
| pmTif15mSuspect OBJECT-TYPE Suspect flag for this 15 minute interval | 1.3.6.1.4.1.2928.6.2.17.1.1.3.1.3 | TruthValue | read-only | current |
| pmTif15mZS OBJECT-TYPE Zero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one. | 1.3.6.1.4.1.2928.6.2.17.1.1.3.1.4 | Counter32 | read-only | current |
| pmTif15mESs OBJECT-TYPE Number of Errored Seconds (ES) for this 15 minute period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defect | 1.3.6.1.4.1.2928.6.2.17.1.1.3.1.5 | Counter15m | read-only | current |
| pmTif15mSESs OBJECT-TYPE Number of Severe Errored Seconds (SES) for this 15 minute period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect. | 1.3.6.1.4.1.2928.6.2.17.1.1.3.1.6 | Counter15m | read-only | current |
| pmTif15mBBEs OBJECT-TYPE Number of Background Block Error (BBE) for this 15 minute period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SES | 1.3.6.1.4.1.2928.6.2.17.1.1.3.1.7 | Gauge32 | read-only | current |
| pmTif15mUASs OBJECT-TYPE Number of Unavailable Second (UAS) for this 15 minute period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them is performed | 1.3.6.1.4.1.2928.6.2.17.1.1.3.1.8 | Counter15m | read-only | current |
| pmTif15mSSs OBJECT-TYPE Number of SLIP Second (SS) for this 15 minute period. SS is defined as one second containing one or more SLIPs | 1.3.6.1.4.1.2928.6.2.17.1.1.3.1.9 | Counter15m | read-only | current |
| pmTif24hTable OBJECT-TYPE Table of 24 hour PM log history | 1.3.6.1.4.1.2928.6.2.17.1.1.4 | not-accessible | current | |
| pmTif24hEntry OBJECT-TYPE One entry for each 24 hour PM interval | 1.3.6.1.4.1.2928.6.2.17.1.1.4.1 | not-accessible | current | |
| pmTif24hIndex OBJECT-TYPE The index that identifies the interval for which the set of statistics is available. Index of '0' indicates the most recently completed interval, and the index is increased by one for each interval back in time. | 1.3.6.1.4.1.2928.6.2.17.1.1.4.1.1 | Unsigned32 | not-accessible | current |
| pmTif24hTime OBJECT-TYPE Time stamp for this 24 hour interval | 1.3.6.1.4.1.2928.6.2.17.1.1.4.1.2 | DateAndTime | read-only | current |
| pmTif24hSuspect OBJECT-TYPE Suspect flag for this 24 hour interval | 1.3.6.1.4.1.2928.6.2.17.1.1.4.1.3 | TruthValue | read-only | current |
| pmTif24hZS OBJECT-TYPE Zero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one. | 1.3.6.1.4.1.2928.6.2.17.1.1.4.1.4 | Counter32 | read-only | current |
| pmTif24hESs OBJECT-TYPE Number of Errored Seconds (ES) for this 24 hour period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defect | 1.3.6.1.4.1.2928.6.2.17.1.1.4.1.5 | Counter24h | read-only | current |
| pmTif24hSESs OBJECT-TYPE Number of Severe Errored Seconds (SES) for this 24 hour period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect. | 1.3.6.1.4.1.2928.6.2.17.1.1.4.1.6 | Counter24h | read-only | current |
| pmTif24hBBEs OBJECT-TYPE Number of Background Block Error (BBE) for this 24 hour period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SES | 1.3.6.1.4.1.2928.6.2.17.1.1.4.1.7 | Gauge32 | read-only | current |
| pmTif24hUASs OBJECT-TYPE Number of Unavailable Second (UAS) for this 24 hour period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them is performed | 1.3.6.1.4.1.2928.6.2.17.1.1.4.1.8 | Counter24h | read-only | current |
| pmTif24hSSs OBJECT-TYPE Number of SLIP Second (SS) for this 24 hour period. SS is defined as one second containing one or more SLIPs | 1.3.6.1.4.1.2928.6.2.17.1.1.4.1.9 | Counter24h | read-only | current |
| pmTif24hCurrentTable OBJECT-TYPE Table of PM data for the current 24 hour period | 1.3.6.1.4.1.2928.6.2.17.1.1.5 | not-accessible | current | |
| pmTif24hCurrentEntry OBJECT-TYPE One entry for each monitored object | 1.3.6.1.4.1.2928.6.2.17.1.1.5.1 | not-accessible | current | |
| pmTif24hCurrentTime OBJECT-TYPE Elapsed time in seconds for the current 24 hour period. | 1.3.6.1.4.1.2928.6.2.17.1.1.5.1.2 | Counter15m | read-only | current |
| pmTif24hCurrentSuspect OBJECT-TYPE Is Suspect flag, if set to `true(1)' the current 24 hour measurement period has unreliable measurement data. | 1.3.6.1.4.1.2928.6.2.17.1.1.5.1.3 | TruthValue | read-only | current |
| pmTif24hCurrentZS OBJECT-TYPE Zero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one. | 1.3.6.1.4.1.2928.6.2.17.1.1.5.1.4 | Counter32 | read-only | current |
| pmTif24hCurrentESs OBJECT-TYPE Number of Errored Seconds (ES) for the current 24 hour period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defect | 1.3.6.1.4.1.2928.6.2.17.1.1.5.1.5 | Counter15m | read-only | current |
| pmTif24hCurrentSESs OBJECT-TYPE Number of Severe Errored Seconds (SES) for the current 24 hour period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect. | 1.3.6.1.4.1.2928.6.2.17.1.1.5.1.6 | Counter15m | read-only | current |
| pmTif24hCurrentBBEs OBJECT-TYPE Number of Background Block Error (BBE) for the current 24 hour period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SES | 1.3.6.1.4.1.2928.6.2.17.1.1.5.1.7 | Gauge32 | read-only | current |
| pmTif24hCurrentUASs OBJECT-TYPE Number of Unavailable Second (UAS) for the current 24 hour period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them is performed | 1.3.6.1.4.1.2928.6.2.17.1.1.5.1.8 | Counter15m | read-only | current |
| pmTif24hCurrentSSs OBJECT-TYPE Number of SLIP Second (SS) for the current 24 hour period. SS is defined as one second containing one or more SLIPs | 1.3.6.1.4.1.2928.6.2.17.1.1.5.1.9 | Counter15m | read-only | current |
| pmAifGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2928.6.2.17.1.2 | |||
| pmAifTable OBJECT-TYPE Table of Performance Monitored access interfaces | 1.3.6.1.4.1.2928.6.2.17.1.2.1 | not-accessible | current | |
| pmAifEntry OBJECT-TYPE One entry for each access interface | 1.3.6.1.4.1.2928.6.2.17.1.2.1.1 | not-accessible | current | |
| pmAifIndex OBJECT-TYPE The index uniquely identifying this access interface. | 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.1 | Unsigned32 | not-accessible | current |
| pmAifAdminStatus OBJECT-TYPE The desired state of the PM function. Affects the operative state of the PM object | 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.2 | INTEGER {up(1), down(2)} | read-write | current |
| pmAifOperStatus OBJECT-TYPE PM operative state. | 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.3 | INTEGER {up(1), down(2)} | read-only | current |
| pmAifFailure OBJECT-TYPE Shows current failure state. An empty string indicates no failure | 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.4 | DisplayString | read-only | current |
| pmAifDataSource OBJECT-TYPE The PM Data Source object | 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.5 | OBJECT IDENTIFIER | read-only | current |
| pmAifDataSourceName OBJECT-TYPE The name of the PM Data Source | 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.6 | DisplayString | read-only | current |
| pmAifUatAlarmsEnabled OBJECT-TYPE If set to `true(1)' then UAT alarms will be sent. Unavailable time (UAT) defines a state where a service is unable to perform its normal task due to severe errors for a longer period. It begins at detection of ten consecutive SES events and ends at detection of ten consecutive non-SES events. In both cases, the 10s are considered part of unavailable respective available time and effects the visibility of G.826 PM events (they are delayed 10s) Entry and exit of UAT is declared by raising and clearing an UAT alarm (if enabled) | 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.7 | TruthValue | read-write | current |
| pmAifTresholdAlarmsEnabled OBJECT-TYPE If set to `true(1)' then threshold alarms will be sent. Each 15m and 24h current register counter can be assigned a threshold value. When crossed, a threshold crossing alarm will be sent for the interval if enabled. Raised alarm will be cleared at end of a following fault free interval i.e. one with all interval counter values below their threshold values and with no UAT. Only one TC alarm per interval can be raised, regardless of how many thresholds have been crossed. | 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.8 | TruthValue | read-write | current |
| pmAifPeriodicEventsEnabled OBJECT-TYPE If set to `true(1)' then History Periodic Events will be sent. | 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.9 | TruthValue | read-write | current |
| pmAifZeroSuppressionEnabled OBJECT-TYPE If set to `true(1)' then Zero Suppression mode is enabled Zero Suppression mode tells whether intervals with all current counters equal to zero shall be stored in the history log or not. If enabled, once a faulty interval is found, its current register content including a zero suppressed interval counter will be stored in the history log. The additional counter specifies how many fault free intervals have preceded the faulty one. In such way, history for a larger measurement period can be logged than would otherwise be possible | 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.10 | TruthValue | read-write | current |
| pmAifHistorySize OBJECT-TYPE The size of the history log | 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.11 | INTEGER {none(1), small(2), large(3)} | read-write | current |
| pmAif15mTresholdES OBJECT-TYPE 15 minute threshold value for ES. Current ES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. | 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.12 | Counter15m | read-write | current |
| pmAif15mTresholdSES OBJECT-TYPE 15 minute threshold value for SES. Current SES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. | 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.13 | Counter15m | read-write | current |
| pmAif15mTresholdBBE OBJECT-TYPE 15 minute threshold value for BBE. Current BBE value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. | 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.14 | Gauge32 | read-write | current |
| pmAif24hTresholdES OBJECT-TYPE 24 hour threshold value for ES. Current ES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. | 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.15 | Counter24h | read-write | current |
| pmAif24hTresholdSES OBJECT-TYPE 24 hour threshold value for SES. Current SES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. | 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.16 | Counter24h | read-write | current |
| pmAif24hTresholdBBE OBJECT-TYPE 24 hour threshold value for BBE. Current BBE value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. | 1.3.6.1.4.1.2928.6.2.17.1.2.1.1.17 | Gauge32 | read-write | current |
| pmAifCurrentTable OBJECT-TYPE Table of PM data for the current 15 minute period | 1.3.6.1.4.1.2928.6.2.17.1.2.2 | not-accessible | current | |
| pmAifCurrentEntry OBJECT-TYPE One entry for each monitored object | 1.3.6.1.4.1.2928.6.2.17.1.2.2.1 | not-accessible | current | |
| pmAifCurrentTime OBJECT-TYPE Elapsed time in seconds for the current 15 minute period. | 1.3.6.1.4.1.2928.6.2.17.1.2.2.1.2 | Counter15m | read-only | current |
| pmAifCurrentSuspect OBJECT-TYPE Is Suspect flag, if set to `true(1)' the current 15 minute measurement period has unreliable measurement data. | 1.3.6.1.4.1.2928.6.2.17.1.2.2.1.3 | TruthValue | read-only | current |
| pmAifCurrentZS OBJECT-TYPE Zero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one. | 1.3.6.1.4.1.2928.6.2.17.1.2.2.1.4 | Counter32 | read-only | current |
| pmAifCurrentESs OBJECT-TYPE Number of Errored Seconds (ES) for the current 15 minute period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defect | 1.3.6.1.4.1.2928.6.2.17.1.2.2.1.5 | Counter15m | read-only | current |
| pmAifCurrentSESs OBJECT-TYPE Number of Severe Errored Seconds (SES) for the current 15 minute period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect. | 1.3.6.1.4.1.2928.6.2.17.1.2.2.1.6 | Counter15m | read-only | current |
| pmAifCurrentBBEs OBJECT-TYPE Number of Background Block Error (BBE) for the current 15 minute period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SES | 1.3.6.1.4.1.2928.6.2.17.1.2.2.1.7 | Gauge32 | read-only | current |
| pmAifCurrentUASs OBJECT-TYPE Number of Unavailable Second (UAS) for the current 15 minute period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them is performed | 1.3.6.1.4.1.2928.6.2.17.1.2.2.1.8 | Counter15m | read-only | current |
| pmAif15mTable OBJECT-TYPE Table of 15 minute PM interval history | 1.3.6.1.4.1.2928.6.2.17.1.2.3 | not-accessible | current | |
| pmAif15mEntry OBJECT-TYPE One entry for each 15 minute PM interval | 1.3.6.1.4.1.2928.6.2.17.1.2.3.1 | not-accessible | current | |
| pmAif15mIndex OBJECT-TYPE The index that identifies the interval for which the set of statistics is available. Index of '0' indicates the most recently completed interval, and the index is increased by one for each interval back in time. | 1.3.6.1.4.1.2928.6.2.17.1.2.3.1.1 | Unsigned32 | not-accessible | current |
| pmAif15mTime OBJECT-TYPE Time stamp for this 15 minute interval | 1.3.6.1.4.1.2928.6.2.17.1.2.3.1.2 | DateAndTime | read-only | current |
| pmAif15mSuspect OBJECT-TYPE Suspect flag for this 15 minute interval | 1.3.6.1.4.1.2928.6.2.17.1.2.3.1.3 | TruthValue | read-only | current |
| pmAif15mZS OBJECT-TYPE Zero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one. | 1.3.6.1.4.1.2928.6.2.17.1.2.3.1.4 | Counter32 | read-only | current |
| pmAif15mESs OBJECT-TYPE Number of Errored Seconds (ES) for this 15 minute period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defect | 1.3.6.1.4.1.2928.6.2.17.1.2.3.1.5 | Counter15m | read-only | current |
| pmAif15mSESs OBJECT-TYPE Number of Severe Errored Seconds (SES) for this 15 minute period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect. | 1.3.6.1.4.1.2928.6.2.17.1.2.3.1.6 | Counter15m | read-only | current |
| pmAif15mBBEs OBJECT-TYPE Number of Background Block Error (BBE) for this 15 minute period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SES | 1.3.6.1.4.1.2928.6.2.17.1.2.3.1.7 | Gauge32 | read-only | current |
| pmAif15mUASs OBJECT-TYPE Number of Unavailable Second (UAS) for this 15 minute period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them is performed | 1.3.6.1.4.1.2928.6.2.17.1.2.3.1.8 | Counter15m | read-only | current |
| pmAif24hTable OBJECT-TYPE Table of 24 hour PM log history | 1.3.6.1.4.1.2928.6.2.17.1.2.4 | not-accessible | current | |
| pmAif24hEntry OBJECT-TYPE One entry for each 24 hour PM interval | 1.3.6.1.4.1.2928.6.2.17.1.2.4.1 | not-accessible | current | |
| pmAif24hIndex OBJECT-TYPE The index that identifies the interval for which the set of statistics is available. Index of '0' indicates the most recently completed interval, and the index is increased by one for each interval back in time. | 1.3.6.1.4.1.2928.6.2.17.1.2.4.1.1 | Unsigned32 | not-accessible | current |
| pmAif24hTime OBJECT-TYPE Time stamp for this 24 hour interval | 1.3.6.1.4.1.2928.6.2.17.1.2.4.1.2 | DateAndTime | read-only | current |
| pmAif24hSuspect OBJECT-TYPE Suspect flag for this 24 hour interval | 1.3.6.1.4.1.2928.6.2.17.1.2.4.1.3 | TruthValue | read-only | current |
| pmAif24hZS OBJECT-TYPE Zero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one. | 1.3.6.1.4.1.2928.6.2.17.1.2.4.1.4 | Counter32 | read-only | current |
| pmAif24hESs OBJECT-TYPE Number of Errored Seconds (ES) for this 24 hour period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defect | 1.3.6.1.4.1.2928.6.2.17.1.2.4.1.5 | Counter24h | read-only | current |
| pmAif24hSESs OBJECT-TYPE Number of Severe Errored Seconds (SES) for this 24 hour period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect. | 1.3.6.1.4.1.2928.6.2.17.1.2.4.1.6 | Counter24h | read-only | current |
| pmAif24hBBEs OBJECT-TYPE Number of Background Block Error (BBE) for this 24 hour period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SES | 1.3.6.1.4.1.2928.6.2.17.1.2.4.1.7 | Gauge32 | read-only | current |
| pmAif24hUASs OBJECT-TYPE Number of Unavailable Second (UAS) for this 24 hour period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them is performed | 1.3.6.1.4.1.2928.6.2.17.1.2.4.1.8 | Counter24h | read-only | current |
| pmAif24hCurrentTable OBJECT-TYPE Table of PM data for the current 24 hour period | 1.3.6.1.4.1.2928.6.2.17.1.2.5 | not-accessible | current | |
| pmAif24hCurrentEntry OBJECT-TYPE One entry for each monitored object | 1.3.6.1.4.1.2928.6.2.17.1.2.5.1 | not-accessible | current | |
| pmAif24hCurrentTime OBJECT-TYPE Elapsed time in seconds for the current 24 hour period. | 1.3.6.1.4.1.2928.6.2.17.1.2.5.1.2 | Counter15m | read-only | current |
| pmAif24hCurrentSuspect OBJECT-TYPE Is Suspect flag, if set to `true(1)' the current 24 hour measurement period has unreliable measurement data. | 1.3.6.1.4.1.2928.6.2.17.1.2.5.1.3 | TruthValue | read-only | current |
| pmAif24hCurrentZS OBJECT-TYPE Zero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one. | 1.3.6.1.4.1.2928.6.2.17.1.2.5.1.4 | Counter32 | read-only | current |
| pmAif24hCurrentESs OBJECT-TYPE Number of Errored Seconds (ES) for the current 24 hour period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defect | 1.3.6.1.4.1.2928.6.2.17.1.2.5.1.5 | Counter15m | read-only | current |
| pmAif24hCurrentSESs OBJECT-TYPE Number of Severe Errored Seconds (SES) for the current 24 hour period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect. | 1.3.6.1.4.1.2928.6.2.17.1.2.5.1.6 | Counter15m | read-only | current |
| pmAif24hCurrentBBEs OBJECT-TYPE Number of Background Block Error (BBE) for the current 24 hour period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SES | 1.3.6.1.4.1.2928.6.2.17.1.2.5.1.7 | Gauge32 | read-only | current |
| pmAif24hCurrentUASs OBJECT-TYPE Number of Unavailable Second (UAS) for the current 24 hour period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them is performed | 1.3.6.1.4.1.2928.6.2.17.1.2.5.1.8 | Counter15m | read-only | current |
| pmDchGroup OBJECT-IDENTITY | 1.3.6.1.4.1.2928.6.2.17.1.3 | |||
| pmDchTable OBJECT-TYPE Table of Performance Monitored DTM channel | 1.3.6.1.4.1.2928.6.2.17.1.3.1 | not-accessible | current | |
| pmDchEntry OBJECT-TYPE One entry for each DTM channel | 1.3.6.1.4.1.2928.6.2.17.1.3.1.1 | not-accessible | current | |
| pmDchIndex OBJECT-TYPE The index uniquely identifying this DTM channel. | 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.1 | Unsigned32 | not-accessible | current |
| pmDchAdminStatus OBJECT-TYPE The desired state of the PM function. Affects the operative state of the PM object | 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.2 | INTEGER {up(1), down(2)} | read-write | current |
| pmDchOperStatus OBJECT-TYPE PM operative state. | 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.3 | INTEGER {up(1), down(2)} | read-only | current |
| pmDchFailure OBJECT-TYPE Shows current failure state. An empty string indicates no failure | 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.4 | DisplayString | read-only | current |
| pmDchDataSource OBJECT-TYPE The PM Data Source object | 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.5 | OBJECT IDENTIFIER | read-only | current |
| pmDchDataSourceName OBJECT-TYPE The name of the PM Data Source | 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.6 | DisplayString | read-only | current |
| pmDchUatAlarmsEnabled OBJECT-TYPE If set to `true(1)' then UAT alarms will be sent. Unavailable time (UAT) defines a state where a service is unable to perform its normal task due to severe errors for a longer period. It begins at detection of ten consecutive SES events and ends at detection of ten consecutive non-SES events. In both cases, the 10s are considered part of unavailable respective available time and effects the visibility of G.826 PM events (they are delayed 10s) Entry and exit of UAT is declared by raising and clearing an UAT alarm (if enabled) | 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.7 | TruthValue | read-write | current |
| pmDchTresholdAlarmsEnabled OBJECT-TYPE If set to `true(1)' then threshold alarms will be sent. Each 15m and 24h current register counter can be assigned a threshold value. When crossed, a threshold crossing alarm will be sent for the interval if enabled. Raised alarm will be cleared at end of a following fault free interval i.e. one with all interval counter values below their threshold values and with no UAT. Only one TC alarm per interval can be raised, regardless of how many thresholds have been crossed. | 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.8 | TruthValue | read-write | current |
| pmDchPeriodicEventsEnabled OBJECT-TYPE If set to `true(1)' then History Periodic Events will be sent. | 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.9 | TruthValue | read-write | current |
| pmDchZeroSuppressionEnabled OBJECT-TYPE If set to `true(1)' then Zero Suppression mode is enabled Zero Suppression mode tells whether intervals with all current counters equal to zero shall be stored in the history log or not. If enabled, once a faulty interval is found, its current register content including a zero suppressed interval counter will be stored in the history log. The additional counter specifies how many fault free intervals have preceded the faulty one. In such way, history for a larger measurement period can be logged than would otherwise be possible | 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.10 | TruthValue | read-write | current |
| pmDchHistorySize OBJECT-TYPE The size of the history log | 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.11 | INTEGER {none(1), small(2), large(3)} | read-write | current |
| pmDch15mTresholdES OBJECT-TYPE 15 minute threshold value for ES. Current ES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. | 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.12 | Counter15m | read-write | current |
| pmDch15mTresholdSES OBJECT-TYPE 15 minute threshold value for SES. Current SES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. | 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.13 | Counter15m | read-write | current |
| pmDch15mTresholdBBE OBJECT-TYPE 15 minute threshold value for BBE. Current BBE value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. | 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.14 | Gauge32 | read-write | current |
| pmDch24hTresholdES OBJECT-TYPE 24 hour threshold value for ES. Current ES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. | 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.15 | Counter24h | read-write | current |
| pmDch24hTresholdSES OBJECT-TYPE 24 hour threshold value for SES. Current SES value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. | 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.16 | Counter24h | read-write | current |
| pmDch24hTresholdBBE OBJECT-TYPE 24 hour threshold value for BBE. Current BBE value equal to or above this threshold will raise a threshold alarm if enabled. A value of zero will disable threshold check. | 1.3.6.1.4.1.2928.6.2.17.1.3.1.1.17 | Gauge32 | read-write | current |
| pmDchCurrentTable OBJECT-TYPE Table of PM data for the current 15 minute period | 1.3.6.1.4.1.2928.6.2.17.1.3.2 | not-accessible | current | |
| pmDchCurrentEntry OBJECT-TYPE One entry for each monitored object | 1.3.6.1.4.1.2928.6.2.17.1.3.2.1 | not-accessible | current | |
| pmDchCurrentTime OBJECT-TYPE Elapsed time in seconds for the current 15 minute period. | 1.3.6.1.4.1.2928.6.2.17.1.3.2.1.2 | Counter15m | read-only | current |
| pmDchCurrentSuspect OBJECT-TYPE Is Suspect flag, if set to `true(1)' the current 15 minute measurement period has unreliable measurement data. | 1.3.6.1.4.1.2928.6.2.17.1.3.2.1.3 | TruthValue | read-only | current |
| pmDchCurrentZS OBJECT-TYPE Zero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one. | 1.3.6.1.4.1.2928.6.2.17.1.3.2.1.4 | Counter32 | read-only | current |
| pmDchCurrentESs OBJECT-TYPE Number of Errored Seconds (ES) for the current 15 minute period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defect | 1.3.6.1.4.1.2928.6.2.17.1.3.2.1.5 | Counter15m | read-only | current |
| pmDchCurrentSESs OBJECT-TYPE Number of Severe Errored Seconds (SES) for the current 15 minute period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect. | 1.3.6.1.4.1.2928.6.2.17.1.3.2.1.6 | Counter15m | read-only | current |
| pmDchCurrentBBEs OBJECT-TYPE Number of Background Block Error (BBE) for the current 15 minute period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SES | 1.3.6.1.4.1.2928.6.2.17.1.3.2.1.7 | Gauge32 | read-only | current |
| pmDchCurrentUASs OBJECT-TYPE Number of Unavailable Second (UAS) for the current 15 minute period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them is performed | 1.3.6.1.4.1.2928.6.2.17.1.3.2.1.8 | Counter15m | read-only | current |
| pmDch15mTable OBJECT-TYPE Table of 15 minute PM interval history | 1.3.6.1.4.1.2928.6.2.17.1.3.3 | not-accessible | current | |
| pmDch15mEntry OBJECT-TYPE One entry for each 15 minute PM interval | 1.3.6.1.4.1.2928.6.2.17.1.3.3.1 | not-accessible | current | |
| pmDch15mIndex OBJECT-TYPE The index that identifies the interval for which the set of statistics is available. Index of '0' indicates the most recently completed interval, and the index is increased by one for each interval back in time. | 1.3.6.1.4.1.2928.6.2.17.1.3.3.1.1 | Unsigned32 | not-accessible | current |
| pmDch15mTime OBJECT-TYPE Time stamp for this 15 minute interval | 1.3.6.1.4.1.2928.6.2.17.1.3.3.1.2 | DateAndTime | read-only | current |
| pmDch15mSuspect OBJECT-TYPE Suspect flag for this 15 minute interval | 1.3.6.1.4.1.2928.6.2.17.1.3.3.1.3 | TruthValue | read-only | current |
| pmDch15mZS OBJECT-TYPE Zero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one. | 1.3.6.1.4.1.2928.6.2.17.1.3.3.1.4 | Counter32 | read-only | current |
| pmDch15mESs OBJECT-TYPE Number of Errored Seconds (ES) for this 15 minute period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defect | 1.3.6.1.4.1.2928.6.2.17.1.3.3.1.5 | Counter15m | read-only | current |
| pmDch15mSESs OBJECT-TYPE Number of Severe Errored Seconds (SES) for this 15 minute period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect. | 1.3.6.1.4.1.2928.6.2.17.1.3.3.1.6 | Counter15m | read-only | current |
| pmDch15mBBEs OBJECT-TYPE Number of Background Block Error (BBE) for this 15 minute period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SES | 1.3.6.1.4.1.2928.6.2.17.1.3.3.1.7 | Gauge32 | read-only | current |
| pmDch15mUASs OBJECT-TYPE Number of Unavailable Second (UAS) for this 15 minute period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them is performed | 1.3.6.1.4.1.2928.6.2.17.1.3.3.1.8 | Counter15m | read-only | current |
| pmDch24hTable OBJECT-TYPE Table of 24 hour PM interval history | 1.3.6.1.4.1.2928.6.2.17.1.3.4 | not-accessible | current | |
| pmDch24hEntry OBJECT-TYPE One entry for each 24 hour PM interval | 1.3.6.1.4.1.2928.6.2.17.1.3.4.1 | not-accessible | current | |
| pmDch24hIndex OBJECT-TYPE The index that identifies the interval for which the set of statistics is available. Index of '0' indicates the most recently completed interval, and the index is increased by one for each interval back in time. | 1.3.6.1.4.1.2928.6.2.17.1.3.4.1.1 | Unsigned32 | not-accessible | current |
| pmDch24hTime OBJECT-TYPE Time stamp for this 24 hour interval | 1.3.6.1.4.1.2928.6.2.17.1.3.4.1.2 | DateAndTime | read-only | current |
| pmDch24hSuspect OBJECT-TYPE Suspect flag for this 24 hour interval | 1.3.6.1.4.1.2928.6.2.17.1.3.4.1.3 | TruthValue | read-only | current |
| pmDch24hZS OBJECT-TYPE Zero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one. | 1.3.6.1.4.1.2928.6.2.17.1.3.4.1.4 | Counter32 | read-only | current |
| pmDch24hESs OBJECT-TYPE Number of Errored Seconds (ES) for this 24 hour period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defect | 1.3.6.1.4.1.2928.6.2.17.1.3.4.1.5 | Counter24h | read-only | current |
| pmDch24hSESs OBJECT-TYPE Number of Severe Errored Seconds (SES) for this 24 hour period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect. | 1.3.6.1.4.1.2928.6.2.17.1.3.4.1.6 | Counter24h | read-only | current |
| pmDch24hBBEs OBJECT-TYPE Number of Background Block Error (BBE) for this 24 hour period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SES | 1.3.6.1.4.1.2928.6.2.17.1.3.4.1.7 | Gauge32 | read-only | current |
| pmDch24hUASs OBJECT-TYPE Number of Unavailable Second (UAS) for this 24 hour period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them is performed | 1.3.6.1.4.1.2928.6.2.17.1.3.4.1.8 | Counter24h | read-only | current |
| pmDch24hCurrentTable OBJECT-TYPE Table of PM data for the current 24 hour period | 1.3.6.1.4.1.2928.6.2.17.1.3.5 | not-accessible | current | |
| pmDch24hCurrentEntry OBJECT-TYPE One entry for each monitored object | 1.3.6.1.4.1.2928.6.2.17.1.3.5.1 | not-accessible | current | |
| pmDch24hCurrentTime OBJECT-TYPE Elapsed time in seconds for the current 24 hour period. | 1.3.6.1.4.1.2928.6.2.17.1.3.5.1.2 | Counter15m | read-only | current |
| pmDch24hCurrentSuspect OBJECT-TYPE Is Suspect flag, if set to `true(1)' the current 24 hour measurement period has unreliable measurement data. | 1.3.6.1.4.1.2928.6.2.17.1.3.5.1.3 | TruthValue | read-only | current |
| pmDch24hCurrentZS OBJECT-TYPE Zero Suppression Counter. If the performance monitoring uses zero suppression, this counter specifies how many fault free intervals have preceded the faulty one. | 1.3.6.1.4.1.2928.6.2.17.1.3.5.1.4 | Counter32 | read-only | current |
| pmDch24hCurrentESs OBJECT-TYPE Number of Errored Seconds (ES) for the current 24 hour period. ES is defined as one second of available time containing one or more Errored Blocks (EB) or at least one defect | 1.3.6.1.4.1.2928.6.2.17.1.3.5.1.5 | Counter15m | read-only | current |
| pmDch24hCurrentSESs OBJECT-TYPE Number of Severe Errored Seconds (SES) for the current 24 hour period. SES is defined as one second of available time containing more than 30% Errored Blocks (EB) or at least one defect. | 1.3.6.1.4.1.2928.6.2.17.1.3.5.1.6 | Counter15m | read-only | current |
| pmDch24hCurrentBBEs OBJECT-TYPE Number of Background Block Error (BBE) for the current 24 hour period. BBE is defined as the number of Errored Blocks (EB) during one second of available time not part of SES | 1.3.6.1.4.1.2928.6.2.17.1.3.5.1.7 | Gauge32 | read-only | current |
| pmDch24hCurrentUASs OBJECT-TYPE Number of Unavailable Second (UAS) for the current 24 hour period. UAS is defined as one second of UAT (Unavailable Time). During UAT calculations of BBE, ES and SES are inhibited and no data collection of them is performed | 1.3.6.1.4.1.2928.6.2.17.1.3.5.1.8 | Counter15m | read-only | current |
| pmConformanceGroups OBJECT-IDENTITY | 1.3.6.1.4.1.2928.6.2.17.1.4 |
Conformance
| Name | OID | Status |
|---|---|---|
| pmTifConformanceGroup OBJECT-GROUP The PM Trunk Interface Conformance Group. | 1.3.6.1.4.1.2928.6.2.17.1.4.1 | current |
| pmAifConformanceGroup OBJECT-GROUP The PM Access Interface Conformance Group. | 1.3.6.1.4.1.2928.6.2.17.1.4.2 | current |
| pmDchConformanceGroup OBJECT-GROUP The PM Channel Conformance Group. | 1.3.6.1.4.1.2928.6.2.17.1.4.3 | current |