MIBs Depot

NBS-SIGCOND-MIB

Registered at
1.3.6.1.4.1.629.227
Last updated
2017-07-27 00:00
Organization
NBS
Namespace
mrv
Source file
NBS-SIGCOND-MIB
Digest
sha256:d83909cdfe6298a700422f7a392b82a4f99c0511744a2cf9f3f395525b835181

Description

Signal Conditioning mib

Contact

For technical support, please contact your service channel

Imports

FromSymbols
IF-MIBInterfaceIndex, ifAlias
NBS-MIBNbsTcMHz, NbsTcMilliDb, nbs
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
NBS-MIB
NBS-SIGCOND-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
nbsSigCondVoaPortGrp
OBJECT-IDENTITY
Variable Optical Attenuation at the port level.
1.3.6.1.4.1.629.227.1current
nbsSigCondVoaPortTableSize
OBJECT-TYPE
The number of ports supporting variable optical attenuation at the port level.
1.3.6.1.4.1.629.227.1.1Unsigned32read-onlycurrent
nbsSigCondVoaPortTable
OBJECT-TYPE
List of ports supporting variable optical attenuation at the port level.
1.3.6.1.4.1.629.227.1.2not-accessiblecurrent
nbsSigCondVoaPortEntry
OBJECT-TYPE
1.3.6.1.4.1.629.227.1.2.1not-accessiblecurrent
nbsSigCondVoaPortIfIndex
OBJECT-TYPE
The Mib2 ifIndex of the attenuable port.
1.3.6.1.4.1.629.227.1.2.1.1InterfaceIndexnot-accessiblecurrent
nbsSigCondVoaPortRxAttenuAdmin
OBJECT-TYPE
Persistent and immediately updated. User-requested attenuation to be applied to received signal, expressed in millidecibels (mdB). Not supported value: -200000
1.3.6.1.4.1.629.227.1.2.1.2INTEGER (-100000..100000)read-writecurrent
nbsSigCondVoaPortRxAttenuOper
OBJECT-TYPE
Attenuation actually being applied to received signal, in millidecibels (mdB). Not supported value: -200000
1.3.6.1.4.1.629.227.1.2.1.3INTEGERread-onlycurrent
nbsSigCondVoaPortTxAttenuAdmin
OBJECT-TYPE
Persistent and immediately updated. User-requested attenuation to be applied before transmitting signal, expressed in millidecibels (mdB). Not supported value: -200000
1.3.6.1.4.1.629.227.1.2.1.4INTEGER (-100000..100000)read-writecurrent
nbsSigCondVoaPortTxAttenuOper
OBJECT-TYPE
Attenuation actually being applied before transmitting signal, in millidecibels (mdB). Not supported value: -200000
1.3.6.1.4.1.629.227.1.2.1.5INTEGERread-onlycurrent
nbsSigCondVoaChannelGrp
OBJECT-IDENTITY
Variable Optical Attenuation at the channel level.
1.3.6.1.4.1.629.227.2current
nbsSigCondVoaChannelRangeTableSize
OBJECT-TYPE
The number of mux ports supporting variable optical attenuation at the channel level.
1.3.6.1.4.1.629.227.2.1Unsigned32read-onlycurrent
nbsSigCondVoaChannelRangeTable
OBJECT-TYPE
The channel attenuation values supported on this port.
1.3.6.1.4.1.629.227.2.2not-accessiblecurrent
nbsSigCondVoaChannelRangeEntry
OBJECT-TYPE
1.3.6.1.4.1.629.227.2.2.1not-accessiblecurrent
nbsSigCondVoaChannelRangeIfIndex
OBJECT-TYPE
The Mib2 ifIndex of the mux port.
1.3.6.1.4.1.629.227.2.2.1.1InterfaceIndexnot-accessiblecurrent
nbsSigCondVoaChannelRangeMin
OBJECT-TYPE
The lowest channel attenuation value supported by this mux port, expressed in millidecibels (mdB). This is the smallest attenuation supported.
1.3.6.1.4.1.629.227.2.2.1.2NbsTcMilliDbread-onlycurrent
nbsSigCondVoaChannelRangeMax
OBJECT-TYPE
The greatest channel attenuation value supported by this mux port, expressed in millidecibels (mdB). This is the largest attenuation supported.
1.3.6.1.4.1.629.227.2.2.1.3NbsTcMilliDbread-onlycurrent
nbsSigCondVoaChannelRangeIncr
OBJECT-TYPE
The precision of the VOA, expressed in millidecibels (mdB). The minimum difference between attenuation values.
1.3.6.1.4.1.629.227.2.2.1.4NbsTcMilliDbread-onlycurrent
nbsSigCondRamanGrp
OBJECT-IDENTITY
Raman amplifier information for the port.
1.3.6.1.4.1.629.227.3current
nbsSigCondRamanTableSize
OBJECT-TYPE
The number of raman ports in this system.
1.3.6.1.4.1.629.227.3.1Unsigned32read-onlycurrent
nbsSigCondRamanTable
OBJECT-TYPE
Table of Raman readings.
1.3.6.1.4.1.629.227.3.2not-accessiblecurrent
nbsSigCondRamanEntry
OBJECT-TYPE
Raman readings on an individual port.
1.3.6.1.4.1.629.227.3.2.1not-accessiblecurrent
nbsSigCondRamanIfIndex
OBJECT-TYPE
The Mib2 ifIndex of the Raman port
1.3.6.1.4.1.629.227.3.2.1.1InterfaceIndexnot-accessiblecurrent
nbsSigCondRamanPumpPwrAdmin
OBJECT-TYPE
Persistent and immediately updated. User-requested pump power, in microwatts (uW). User interfaces should show this in millWatts (mW). Not supported value: -1
1.3.6.1.4.1.629.227.3.2.1.2INTEGERread-writecurrent
nbsSigCondRamanPumpPwrOper
OBJECT-TYPE
Agent reported pump power, in microwatts (uW). User interfaces should show this in millWatts (mW). Not supported value: -1
1.3.6.1.4.1.629.227.3.2.1.3INTEGERread-onlycurrent
nbsSigCondEqualizeGrp
OBJECT-IDENTITY
Management info for equalizing power levels among channels within a WDM port
1.3.6.1.4.1.629.227.20current
nbsSigCondEqualizeTableSize
OBJECT-TYPE
The number of entries in nbsSigCondEqualizeTable.
1.3.6.1.4.1.629.227.20.1Unsigned32read-onlycurrent
nbsSigCondEqualizeTable
OBJECT-TYPE
List of WDM ports supporting power level equalization.
1.3.6.1.4.1.629.227.20.2not-accessiblecurrent
nbsSigCondEqualizeEntry
OBJECT-TYPE
Equalization parameters and settings
1.3.6.1.4.1.629.227.20.2.1not-accessiblecurrent
nbsSigCondEqualizeIfIndex
OBJECT-TYPE
The Mib2 ifIndex of this channel's WDM port
1.3.6.1.4.1.629.227.20.2.1.1InterfaceIndexread-onlycurrent
nbsSigCondEqualizeState
OBJECT-TYPE
Used to enable or disable channel equalization on this port. The value disabled(2) disables the feature. No attempt to equalize power levels will be made, and no equalization events will be triggered. The value enabled(3) enables the feature. A best-effort attempt to keep the port signal within the nbsSigCondEqualizeDesired range will be made. Equalization events will be triggered if the power cannot be kept within the nbsSigCondEqualizeDesired range. If this port does not support equalization, this object will report notSupported (1), and any SET requests to this object will be rejected.
1.3.6.1.4.1.629.227.20.2.1.10INTEGER {notSupported(1), disabled(2), enabled(3)}read-writecurrent
nbsSigCondEqualizeLimitMin
OBJECT-TYPE
The lowest channel TxPower setting the equalizer supports
1.3.6.1.4.1.629.227.20.2.1.11NbsTcMilliDbread-onlycurrent
nbsSigCondEqualizeLimitMax
OBJECT-TYPE
The highest channel TxPower setting the equalizer supports
1.3.6.1.4.1.629.227.20.2.1.12NbsTcMilliDbread-onlycurrent
nbsSigCondEqualizeDesiredMin
OBJECT-TYPE
The user-settable minimum channel TxPower level. Allowed values are from nbsSigCondEqualizeLimitMin to nbsSigCondEqualizeLimitMax, inclusive. Equalizer must attempt to maintain the channels' signal at or above this level. The event nbsSigCondEventEqualizeTooLow indicates that it was unable to meet the desired minimum signal strength for a given channel.
1.3.6.1.4.1.629.227.20.2.1.21NbsTcMilliDbread-writecurrent
nbsSigCondEqualizeDesiredMax
OBJECT-TYPE
The user-settable maximum channel TxPower level. Allowed values are from nbsSigCondEqualizeLimitMin to nbsSigCondEqualizeLimitMax, inclusive. Equalizer must attempt to maintain the channels' signal at or below this level. The event nbsSigCondEventEqualizeTooHigh indicates that it was unable to meet the desired maximum signal strength for a given channel.
1.3.6.1.4.1.629.227.20.2.1.22NbsTcMilliDbread-writecurrent
nbsSigCondEqualizeDesiredVal
OBJECT-TYPE
Equalizer must attempt to maintain the channels' signal at this level. Allowed values are from nbsSigCondEqualizeLimitMin to nbsSigCondEqualizeLimitMax, inclusive.
1.3.6.1.4.1.629.227.20.2.1.23NbsTcMilliDbread-writecurrent
nbsSigCondRedundGrp
OBJECT-IDENTITY
Management info for power level based redundancy
1.3.6.1.4.1.629.227.30current
nbsSigCondRedundTableSize
OBJECT-TYPE
The number of entries in nbsSigCondRedund.
1.3.6.1.4.1.629.227.30.1Unsigned32read-onlycurrent
nbsSigCondRedundTable
OBJECT-TYPE
List of ports supporting power level redundancy.
1.3.6.1.4.1.629.227.30.2not-accessiblecurrent
nbsSigCondRedundEntry
OBJECT-TYPE
Redundancy settings
1.3.6.1.4.1.629.227.30.2.1not-accessiblecurrent
nbsSigCondRedundIfIndex
OBJECT-TYPE
The Mib2 ifIndex of this channel's Redundancy port
1.3.6.1.4.1.629.227.30.2.1.1InterfaceIndexread-onlycurrent
nbsSigCondRedundLimitMin
OBJECT-TYPE
The lowest channel Power setting
1.3.6.1.4.1.629.227.30.2.1.5NbsTcMilliDbread-onlycurrent
nbsSigCondRedundLimitMax
OBJECT-TYPE
The highest channel Power setting
1.3.6.1.4.1.629.227.30.2.1.8NbsTcMilliDbread-onlycurrent
nbsSigCondRedundDesiredMin
OBJECT-TYPE
The lowest channel Power setting before the redundancy kicks in
1.3.6.1.4.1.629.227.30.2.1.10NbsTcMilliDbread-writecurrent
nbsSigCondRedundDesiredMax
OBJECT-TYPE
The highest channel Power setting before the redundancy kicks in
1.3.6.1.4.1.629.227.30.2.1.15NbsTcMilliDbread-writecurrent
nbsSigCondPortGrp
OBJECT-IDENTITY
Power readings from the port.
1.3.6.1.4.1.629.227.40current
nbsSigCondPortTableSize
OBJECT-TYPE
The number of entries in nbsSigCondPortTable.
1.3.6.1.4.1.629.227.40.1Unsigned32read-onlycurrent
nbsSigCondPortTable
OBJECT-TYPE
Table of VOA and VGA ports.
1.3.6.1.4.1.629.227.40.2not-accessiblecurrent
nbsSigCondPortEntry
OBJECT-TYPE
1.3.6.1.4.1.629.227.40.2.1not-accessiblecurrent
nbsSigCondPortIfIndex
OBJECT-TYPE
The Mib2 ifIndex of the port
1.3.6.1.4.1.629.227.40.2.1.1InterfaceIndexnot-accessiblecurrent
nbsSigCondPortRxPower
OBJECT-TYPE
Measured receiver power, in millidecibels (mdBm). User interfaces should show this in decibels (dBm). Not supported value: -100000
1.3.6.1.4.1.629.227.40.2.1.2INTEGERread-onlycurrent
nbsSigCondPortTxPower
OBJECT-TYPE
Measured transmitter power, in millidecibels (mdBm). User interfaces should show this in decibels (dBm). Not supported value: -100000
1.3.6.1.4.1.629.227.40.2.1.3INTEGERread-onlycurrent
nbsSigCondPortReflection
OBJECT-TYPE
Measured back reflection power, in millidecibels (mdBm). User interfaces should show this in decibels (dBm). Not supported value: -100000
1.3.6.1.4.1.629.227.40.2.1.4INTEGERread-onlycurrent
nbsSigCondPortRxPowerMin
OBJECT-TYPE
Measured minimum receiver power, in millidecibels (mdBm). User interfaces should show this in decibels (dBm). Not supported value: -100000
1.3.6.1.4.1.629.227.40.2.1.5INTEGERread-onlycurrent
nbsSigCondPortRxPowerMax
OBJECT-TYPE
Measured maximum receiver power, in millidecibels (mdBm). User interfaces should show this in decibels (dBm). Not supported value: -100000
1.3.6.1.4.1.629.227.40.2.1.6INTEGERread-onlycurrent
nbsSigCondPortNoiseFigure
OBJECT-TYPE
Measured Noise Figure value, in millidecibels (mdB). User interfaces should show this in decibels (dB). Not supported value: -100000
1.3.6.1.4.1.629.227.40.2.1.7INTEGERread-onlycurrent
nbsSigCondChannelGrp
OBJECT-IDENTITY
Signal info for WDM channels within a WDM port
1.3.6.1.4.1.629.227.50current
nbsSigCondChannelTableSize
OBJECT-TYPE
The number of entries in nbsSigCondChannelTable.
1.3.6.1.4.1.629.227.50.1Unsigned32read-onlycurrent
nbsSigCondChannelTable
OBJECT-TYPE
WDM channels within a mux port
1.3.6.1.4.1.629.227.50.2not-accessiblecurrent
nbsSigCondChannelEntry
OBJECT-TYPE
1.3.6.1.4.1.629.227.50.2.1not-accessiblecurrent
nbsSigCondChannelIfIndex
OBJECT-TYPE
The Mib2 ifIndex of this channel's mux port
1.3.6.1.4.1.629.227.50.2.1.1InterfaceIndexnot-accessiblecurrent
nbsSigCondChannelCenterline
OBJECT-TYPE
The center frequency of this channel, in MHz
1.3.6.1.4.1.629.227.50.2.1.2NbsTcMHzread-onlycurrent
nbsSigCondChannelRxPower
OBJECT-TYPE
The dynamically measured or calculated receive signal strength
1.3.6.1.4.1.629.227.50.2.1.11NbsTcMilliDbread-onlycurrent
nbsSigCondChannelTxPower
OBJECT-TYPE
The dynamically measured or calculated transmit signal strength
1.3.6.1.4.1.629.227.50.2.1.12NbsTcMilliDbread-onlycurrent
nbsSigCondChannelTxAttenu
OBJECT-TYPE
The actual attenuation applied to this channel, possibly representing changes made by the equalization process if nbsSigCondEqualizeState is enabled for this IfIndex.
1.3.6.1.4.1.629.227.50.2.1.14NbsTcMilliDbread-onlycurrent
nbsSigCondChannelRxAttenu
OBJECT-TYPE
The actual attenuation applied to this channel, possibly representing changes made by the equalization process if nbsSigCondEqualizeState is enabled for this IfIndex.
1.3.6.1.4.1.629.227.50.2.1.15NbsTcMilliDbread-onlycurrent
nbsSigCondVodPortGrp
OBJECT-IDENTITY
Dispersion compensation at the port level.
1.3.6.1.4.1.629.227.60current
nbsSigCondVodPortTableSize
OBJECT-TYPE
The number of ports supporting variable optical dispersion at the port level.
1.3.6.1.4.1.629.227.60.1Unsigned32read-onlycurrent
nbsSigCondVodPortTable
OBJECT-TYPE
List of ports supporting variable optical attenuation at the port level.
1.3.6.1.4.1.629.227.60.2not-accessiblecurrent
nbsSigCondVodPortEntry
OBJECT-TYPE
1.3.6.1.4.1.629.227.60.2.1not-accessiblecurrent
nbsSigCondVodPortIfIndex
OBJECT-TYPE
The Mib2 ifIndex of the dispersion compensation port.
1.3.6.1.4.1.629.227.60.2.1.1InterfaceIndexnot-accessiblecurrent
nbsSigCondVodPortDispersionMin
OBJECT-TYPE
Minimum allowed dispersion compensation in ps/nm. Not supported value: 0x80000000
1.3.6.1.4.1.629.227.60.2.1.2INTEGER (-100000..100000)read-onlycurrent
nbsSigCondVodPortDispersionMax
OBJECT-TYPE
Maximum allowed dispersion compensation in ps/nm. Not supported value: 0x80000000
1.3.6.1.4.1.629.227.60.2.1.3INTEGER (-100000..100000)read-onlycurrent
nbsSigCondVodPortDispersionAdmin
OBJECT-TYPE
Desired dispersion compensation in ps/nm. Not supported value: 0x80000000
1.3.6.1.4.1.629.227.60.2.1.4INTEGER (-100000..100000)read-writecurrent
nbsSigCondVodPortDispersionOper
OBJECT-TYPE
Actual dispersion in ps/nm Not supported value: 0x80000000
1.3.6.1.4.1.629.227.60.2.1.5INTEGER (-100000..100000)read-onlycurrent
nbsSigCondVodPortDispersionGridOffsetCenter
OBJECT-TYPE
The center frequency of the offset, in GigaHertz (GHz), unless FreqExponent != 9. Not supported value: 0
1.3.6.1.4.1.629.227.60.2.1.10INTEGERread-onlycurrent
nbsSigCondVodPortDispersionGridOffsetMin
OBJECT-TYPE
In GigaHertz (GHz), unless FreqExponent != 9. Not supported value: 0x80000000
1.3.6.1.4.1.629.227.60.2.1.11INTEGER (-100000..100000)read-onlycurrent
nbsSigCondVodPortDispersionGridOffsetMax
OBJECT-TYPE
In GigaHertz (GHz), unless FreqExponent != 9. Not supported value: 0x80000000
1.3.6.1.4.1.629.227.60.2.1.12INTEGER (-100000..100000)read-onlycurrent
nbsSigCondVodPortDispersionGridOffsetStep
OBJECT-TYPE
The spacing of the allowable grid offsets that this port supports, in GigaHertz (GHz), unless FreqExponent != 9. Not supported value: 0
1.3.6.1.4.1.629.227.60.2.1.13INTEGERread-onlycurrent
nbsSigCondVodPortDispersionGridOffsetExponent
OBJECT-TYPE
The exponent of all the GridOffset values (including GridOffsetStep). 9 (the default) indicates all units are in GigaHertz (GHz).
1.3.6.1.4.1.629.227.60.2.1.14INTEGERread-onlycurrent
nbsSigCondVodPortDispersionGridOffsetAdmin
OBJECT-TYPE
In GigaHertz (GHz), unless FreqExponent != 9. Not supported value: 0x80000000
1.3.6.1.4.1.629.227.60.2.1.15INTEGER (-100000..100000)read-writecurrent
nbsSigCondVodPortDispersionGridOffsetOper
OBJECT-TYPE
In GigaHertz (GHz), unless FreqExponent != 9. Not supported value: 0x80000000
1.3.6.1.4.1.629.227.60.2.1.16INTEGER (-100000..100000)read-onlycurrent
nbsSigCondTraps
OBJECT-IDENTITY
SNMP Traps or Notifications
1.3.6.1.4.1.629.227.200current
nbsSigCondEvent
OBJECT-IDENTITY
SNMP Traps or Notifications
1.3.6.1.4.1.629.227.200.0current

Notifications

NameOIDStatus
nbsSigCondEventEqualizeOk
NOTIFICATION-TYPE
Sent when equalizer becomes able to maintain TxPower within the user-specified nbsSigCondEqualizeDesired range. This Notification is of severity ERROR, which means it should be emitted unless disabled or nbsCmmcSysTrapTblEntLevel is set to a severity worse than error(3).
1.3.6.1.4.1.629.227.200.0.20current
nbsSigCondEventEqualizeTooLow
NOTIFICATION-TYPE
Sent when equalizer becomes unable to maintain TxPower at or above nbsSigCondEqualizeDesiredMin. This Notification is of severity ERROR, which means it should be emitted unless disabled or nbsCmmcSysTrapTblEntLevel is set to a severity worse than error(3).
1.3.6.1.4.1.629.227.200.0.21current
nbsSigCondEventEqualizeTooHigh
NOTIFICATION-TYPE
Sent when equalizer becomes unable to maintain TxPower at or below nbsSigCondEqualizeDesiredMax. This Notification is of severity ERROR, which means it should be emitted unless disabled or nbsCmmcSysTrapTblEntLevel is set to a severity worse than error(3).
1.3.6.1.4.1.629.227.200.0.22current