MY-INTERFACE-MIB
- Registered at
- 1.3.6.1.4.1.4881.1.1.10.2.10
- Last updated
- 2002-03-20 00:00
- Organization
- $Company$
- Revisions
- 2002-03-20 00:00
- Namespace
- ruijie
- Source file
MY-INTERFACE-MIB- Digest
sha256:2a2388a420396453186191a7065f5d3ec884cf5eab991efbc8921ae9c65761f8
Description
This module defines my interface mibs.
Contact
Tel: $Telephone$ E-mail: $E-mail$
Imports
| From | Symbols |
|---|---|
| MY-SMI | myMgmt |
| MY-TC | ConfigStatus, IfIndex, MemberMap |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | VlanId |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB IANAifType-MIB IF-MIB MY-INTERFACE-MIB MY-SMI MY-TC P-BRIDGE-MIB Q-BRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| myIfConfigMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.4881.1.1.10.2.10.1 | |||
| myIfTable OBJECT-TYPE list of interface basic configuration objects. | 1.3.6.1.4.1.4881.1.1.10.2.10.1.1 | not-accessible | current | |
| myIfEntry OBJECT-TYPE Entry contains interface basic configurations. | 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1 | not-accessible | current | |
| myIfIndex OBJECT-TYPE | 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.1 | IfIndex | read-only | current |
| myIfPortType OBJECT-TYPE Port type of this port, list as above. port100MBASEFX indicates that port is port100MBASEFXL or port100MBASEFXS, and system doesn't distinguish. port1000MBASEFX indicates that port is port1000MBASEFLX or port1000MBASEFSX, and system doesn't distinguish. This attribute apply physical port | 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.2 | INTEGER {unknown(1), port10M100MBASETX(2), port100MBASEFXL(3), port100MBASEFXS(4), port1000MBASESX(5), port1000MBASELX(6), port1000MBASETX(7), portGBIC(8), port100MBASEFX(9), port1000MBASEFX(10), portSFP(11), port10GBASESR(12), port10GBASELR(13), port10GBASEER(14), port10GBASELX4(15), port10GBASESW(16), port10GBASELW(17), port10GBASEEW(18)} | read-only | current |
| myIfFlowControlAdminStatus OBJECT-TYPE Flow control of a port management status. This attribute apply physical port and aggreate port | 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.3 | INTEGER {enabled(1), disabled(2), autonego(3)} | read-write | current |
| myIfFlowControlOperStatus OBJECT-TYPE Oper status: after the negotiation between two ports connetted the flow contrl status. This attribute apply physical port and aggreate port | 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.4 | EnabledStatus | read-only | current |
| myIfAdminSpeed OBJECT-TYPE port speed settings. This attribute apply physical port and aggreate port | 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.5 | INTEGER {speed10Mb(1), speed100Mb(2), speed1000Mb(3), autonego(4), speed10Gb(5)} | read-write | current |
| myIfAdminDuplex OBJECT-TYPE port duplex settings. This attribute apply physical port and aggreate port | 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.6 | INTEGER {full(1), half(2), autonego(3)} | read-write | current |
| myIfOperSpeed OBJECT-TYPE After two port have negotiated the speed status,and this object is the working speed status. while the port link status is down , then the speed status is unknown(4). This attribute apply physical port and aggreate port | 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.7 | INTEGER {speed10Mb(1), speed100Mb(2), speed1000Mb(3), unknown(4), speed10Gb(5)} | read-only | current |
| myIfOperDuplex OBJECT-TYPE After two port have negotiated the duplex status, and this object is the working duplex status. while the port link status is down , then the speed status is unknown(3). This attribute apply physical port and aggreate port | 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.8 | INTEGER {full(1), half(2), unknown(3)} | read-only | current |
| myIfManageStatus OBJECT-TYPE Management status of the interface. | 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.9 | EnabledStatus | read-write | current |
| myIfIpBroadcast OBJECT-TYPE Broadcast address of the interface . | 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.10 | IpAddress | read-write | current |
| myIfLayer OBJECT-TYPE | 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.11 | INTEGER {layer-2(1), layer-3(2)} | read-write | current |
| myIfMode OBJECT-TYPE This value is meaning for only physical port and aggreate port | 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.12 | INTEGER {access(1), trunk(2), dot1q-tunnel(3), hybrid(4), other(5)} | read-write | current |
| myIfCounterClear OBJECT-TYPE Setting its to any value but 0, will clear counters of this interface. Setting its value to 0 will cause no action of the agent. and when query will always return 0. | 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.13 | Integer32 | read-write | current |
| myIfEntryStatus OBJECT-TYPE Status of this entry, set this object to valid will create a interface, and set its value to invalid will delete the interface of this entry. | 1.3.6.1.4.1.4881.1.1.10.2.10.1.1.1.14 | ConfigStatus | read-create | current |
| myIfIpTable OBJECT-TYPE A list of interface ip configuration entries. | 1.3.6.1.4.1.4881.1.1.10.2.10.1.2 | not-accessible | current | |
| myIfIpEntry OBJECT-TYPE An entry containing configuration information applicable to a Layer3 interface. | 1.3.6.1.4.1.4881.1.1.10.2.10.1.2.1 | not-accessible | current | |
| myIfIpIfIndex OBJECT-TYPE A unique value, for each Layer3 interface. | 1.3.6.1.4.1.4881.1.1.10.2.10.1.2.1.1 | IfIndex | read-only | current |
| myIfIpId OBJECT-TYPE Type of interface ip address. | 1.3.6.1.4.1.4881.1.1.10.2.10.1.2.1.2 | INTEGER {primary(1), secondary(2)} | read-only | current |
| myIfIp OBJECT-TYPE Ip address of the interface myIfIndex refer to. | 1.3.6.1.4.1.4881.1.1.10.2.10.1.2.1.3 | IpAddress | read-only | current |
| myIfIpMask OBJECT-TYPE Ip mask of the interface ip address. | 1.3.6.1.4.1.4881.1.1.10.2.10.1.2.1.4 | IpAddress | read-write | current |
| myIfIpEntryStatus OBJECT-TYPE entry status of this entry. and the means in this enviraments can reffer to the text-convention definition of the RowStatus. | 1.3.6.1.4.1.4881.1.1.10.2.10.1.2.1.5 | RowStatus | read-create | current |
| myIfStatusTable OBJECT-TYPE list of interface status. Status information include some error state and result of examining to the interface,etc. | 1.3.6.1.4.1.4881.1.1.10.2.10.1.3 | not-accessible | current | |
| myIfStatusEntry OBJECT-TYPE Entry contains interface status information. | 1.3.6.1.4.1.4881.1.1.10.2.10.1.3.1 | not-accessible | current | |
| myIfStatusIndex OBJECT-TYPE | 1.3.6.1.4.1.4881.1.1.10.2.10.1.3.1.1 | IfIndex | read-only | current |
| myIfStatusLoopBackExamine OBJECT-TYPE Setting its to any value but 0, will Checking whether this port or aggreate can receive and send packets normally, It indicates that port or aggreate is normal if opertion is success. Setting its value to 0 will cause no action of the agent. and when query will always return 0. This attribute apply physical port and aggreate port | 1.3.6.1.4.1.4881.1.1.10.2.10.1.3.1.2 | Integer32 | read-write | current |
| myIfErrorStatus OBJECT-TYPE Port's error status information | 1.3.6.1.4.1.4881.1.1.10.2.10.1.3.1.3 | INTEGER {no-error(1), err-disable-bpduguard(2), err-disable-ptsecurity(3)} | read-only | current |
| myIfLineDetect OBJECT-TYPE | 1.3.6.1.4.1.4881.1.1.10.2.10.1.3.1.4 | Integer32 | read-only | current |
| myGlobalIfDisableRecovery OBJECT-TYPE Setting its to any value but 0, the interfaces which is shutted down by some error happened will recovery from disabled status . Setting its value to 0 will cause no action of the agent. and when query will always return 0. This attribute apply physical port and aggreate port | 1.3.6.1.4.1.4881.1.1.10.2.10.1.4 | Integer32 | read-write | current |
| myPortTypeChooseTable OBJECT-TYPE | 1.3.6.1.4.1.4881.1.1.10.2.10.1.5 | not-accessible | current | |
| myPortTypeChooseEntry OBJECT-TYPE | 1.3.6.1.4.1.4881.1.1.10.2.10.1.5.1 | not-accessible | current | |
| myPortTypeChooseIndex OBJECT-TYPE | 1.3.6.1.4.1.4881.1.1.10.2.10.1.5.1.1 | IfIndex | read-only | current |
| myPortTypeChooseType OBJECT-TYPE | 1.3.6.1.4.1.4881.1.1.10.2.10.1.5.1.2 | INTEGER {fiber(1), copper(2)} | read-only | current |
| myIfMTUTable OBJECT-TYPE | 1.3.6.1.4.1.4881.1.1.10.2.10.1.6 | not-accessible | current | |
| myIfMTUEntry OBJECT-TYPE | 1.3.6.1.4.1.4881.1.1.10.2.10.1.6.1 | not-accessible | current | |
| myIfMTUIndex OBJECT-TYPE | 1.3.6.1.4.1.4881.1.1.10.2.10.1.6.1.1 | IfIndex | read-only | current |
| myIfMTU OBJECT-TYPE | 1.3.6.1.4.1.4881.1.1.10.2.10.1.6.1.2 | Integer32 | read-write | current |
| myInterfaceTraps OBJECT-IDENTITY | 1.3.6.1.4.1.4881.1.1.10.2.10.2 | |||
| lineDetectStatus OBJECT-TYPE The type of storm of interface | 1.3.6.1.4.1.4881.1.1.10.2.10.2.1 | INTEGER {ok(1), open(2), short(3)} | accessible-for-notify | current |
| lineDetectPosition OBJECT-TYPE | 1.3.6.1.4.1.4881.1.1.10.2.10.2.2 | Integer32 | accessible-for-notify | current |
| myInterfaceMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.4881.1.1.10.2.10.3 | |||
| myInterfaceMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.4881.1.1.10.2.10.3.1 | |||
| myInterfaceMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.4881.1.1.10.2.10.3.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| lineQualityDetect NOTIFICATION-TYPE | 1.3.6.1.4.1.4881.1.1.10.2.10.2.3 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| myInterfaceMIBCompliance MODULE-COMPLIANCE The compliance statement for entities which implement the My Interface MIB | 1.3.6.1.4.1.4881.1.1.10.2.10.3.1.1 | current |
| myInterfaceMIBGroup OBJECT-GROUP A collection of objects providing interface basic configure . | 1.3.6.1.4.1.4881.1.1.10.2.10.3.2.1 | current |
| myPortTypeChooseMibGroup OBJECT-GROUP | 1.3.6.1.4.1.4881.1.1.10.2.10.3.2.2 | current |
| myIfMTUMibGroup OBJECT-GROUP | 1.3.6.1.4.1.4881.1.1.10.2.10.3.2.3 | current |
| myIfLineDetectGroup OBJECT-GROUP | 1.3.6.1.4.1.4881.1.1.10.2.10.3.2.4 | current |