MPLS-LSR-EXT-STD-MIB
- Registered at
- 1.3.6.1.2.1.10.166.19
- Last updated
- 2015-02-02 00:00
- Organization
- Multiprotocol Label Switching (MPLS) Working Group
- Revisions
- 2015-02-02 00:00
- Namespace
- standard
- Source file
MPLS-LSR-EXT-STD-MIB- Digest
sha256:9518772883e55f9151c396dd0e59d93217f3dcff22c9050823a2501773120ee7
Description
This MIB module contains generic object definitions for MPLS LSRs in transport networks. Copyright (c) 2015 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info).
Contact
Venkatesan Mahalingam Dell Inc, 5450 Great America Parkway, Santa Clara, CA 95054, USA Email: venkat.mahalingams@gmail.com Kannan KV Sampath Redeem, India Email: kannankvs@gmail.com Sam Aldrin Huawei Technologies 2330 Central Express Way, Santa Clara, CA 95051, USA Email: aldrin.ietf@gmail.com Thomas D. Nadeau Email: tnadeau@lucidvision.com
Imports
| From | Symbols |
|---|---|
| MPLS-LSR-STD-MIB | mplsInSegmentGroup, mplsInterfaceGroup, mplsLsrNotificationGroup, mplsOutSegmentGroup, mplsXCGroup, mplsXCInSegmentIndex, mplsXCIndex, mplsXCOutSegmentIndex |
| MPLS-TC-STD-MIB | mplsStdMIB |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, RowPointer, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANA-ADDRESS-FAMILY-NUMBERS-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB MPLS-LSR-EXT-STD-MIB MPLS-LSR-STD-MIB MPLS-TC-STD-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| mplsLsrExtNotifications OBJECT-IDENTITY | 1.3.6.1.2.1.10.166.19.0 | |||
| mplsLsrExtObjects OBJECT-IDENTITY | 1.3.6.1.2.1.10.166.19.1 | |||
| mplsXCExtTable OBJECT-TYPE This table sparse augments the mplsXCTable of MPLS-LSR-STD-MIB (RFC 3813) to provide MPLS-TP-specific information about associated tunnel information | 1.3.6.1.2.1.10.166.19.1.1 | not-accessible | current | |
| mplsXCExtEntry OBJECT-TYPE An entry in this table sparsely extends the cross-connect information represented by an entry in the mplsXCTable in MPLS-LSR-STD-MIB (RFC 3813) through a sparse augmentation. An entry can be created by a network operator via SNMP SET commands or in response to signaling protocol events. | 1.3.6.1.2.1.10.166.19.1.1.1 | not-accessible | current | |
| mplsXCExtTunnelPointer OBJECT-TYPE This read-only object indicates the back pointer to the tunnel entry segment. The only valid value for Tunnel Pointer is mplsTunnelTable entry. | 1.3.6.1.2.1.10.166.19.1.1.1.1 | RowPointer | read-only | current |
| mplsXCExtOppositeDirXCPtr OBJECT-TYPE This object indicates the pointer to the opposite- direction XC entry. This object cannot be modified if mplsXCRowStatus for the corresponding entry in the mplsXCTable is active(1). If this pointer is not set or removed, mplsXCOperStatus should be set to down(2). | 1.3.6.1.2.1.10.166.19.1.1.1.2 | RowPointer | read-create | current |
| mplsLsrExtConformance OBJECT-IDENTITY | 1.3.6.1.2.1.10.166.19.2 | |||
| mplsLsrExtCompliances OBJECT-IDENTITY | 1.3.6.1.2.1.10.166.19.2.1 | |||
| mplsLsrExtGroups OBJECT-IDENTITY | 1.3.6.1.2.1.10.166.19.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| mplsLsrExtModuleFullCompliance MODULE-COMPLIANCE Compliance statement for agents that provide full support for MPLS-LSR-EXT-STD-MIB. The mandatory group has to be implemented by all LSRs that originate, terminate, or act as transit for TE-LSPs/tunnels. In addition, depending on the type of tunnels supported, other groups become mandatory as explained below. | 1.3.6.1.2.1.10.166.19.2.1.1 | current |
| mplsLsrExtModuleReadOnlyCompliance MODULE-COMPLIANCE Compliance requirement for implementations that only provide read-only support for MPLS-LSR-EXT-STD-MIB. Such devices can then be monitored but cannot be configured using this MIB module. | 1.3.6.1.2.1.10.166.19.2.1.2 | current |
| mplsXCExtGroup OBJECT-GROUP This object should be supported in order to access the tunnel entry from the XC entry. | 1.3.6.1.2.1.10.166.19.2.2.1 | current |
| mplsXCExtReadOnlyObjectsGroup OBJECT-GROUP This Object is needed to associate the opposite-direction (forward/reverse) XC entry. | 1.3.6.1.2.1.10.166.19.2.2.2 | current |