MPLS-LC-FR-STD-MIB
- Registered at
- 1.3.6.1.2.1.10.166.10
- Last updated
- 2006-01-12 00:00
- Organization
- Multiprotocol Label Switching (MPLS) Working Group
- Revisions
- 2006-01-12 00:00
- Namespace
- standard
- Source file
MPLS-LC-FR-STD-MIB- Digest
sha256:4425b2d3b8f01d5d192b90cb139a22626a381600d2325fd25560fdf84255d7ea
Description
This MIB module contains managed object definitions for MPLS Label-Controlled Frame-Relay interfaces as defined in (RFC3034). Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4368; see the RFC itself for full legal notices.
Contact
Thomas D. Nadeau Cisco Systems, Inc. Email: tnadeau@cisco.com Subrahmanya Hegde Email: subrah@cisco.com General comments should be sent to mpls@uu.net
Imports
| From | Symbols |
|---|---|
| FRAME-RELAY-DTE-MIB | DLCI |
| MPLS-LSR-STD-MIB | mplsInterfaceIndex |
| MPLS-TC-STD-MIB | mplsStdMIB |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, RowStatus, StorageType, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
FRAME-RELAY-DTE-MIB IANA-ADDRESS-FAMILY-NUMBERS-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB MPLS-LC-FR-STD-MIB MPLS-LSR-STD-MIB MPLS-TC-STD-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| mplsLcFrStdNotifications OBJECT-IDENTITY | 1.3.6.1.2.1.10.166.10.0 | |||
| mplsLcFrStdObjects OBJECT-IDENTITY | 1.3.6.1.2.1.10.166.10.1 | |||
| mplsLcFrStdInterfaceConfTable OBJECT-TYPE This table specifies per-interface MPLS LC-FR capability and associated information. In particular, this table sparsely extends the MPLS-LSR-STD-MIB's mplsInterfaceConfTable. | 1.3.6.1.2.1.10.166.10.1.1 | not-accessible | current | |
| mplsLcFrStdInterfaceConfEntry OBJECT-TYPE An entry in this table is created by an LSR for every interface capable of supporting MPLS LC-FR. Each entry in this table will exist only if a corresponding entry in ifTable and mplsInterfaceConfTable exists. If the associated entries in ifTable and mplsInterfaceConfTable are deleted, the corresponding entry in this table must also be deleted shortly thereafter. | 1.3.6.1.2.1.10.166.10.1.1.1 | not-accessible | current | |
| mplsLcFrStdTrafficMinDlci OBJECT-TYPE This is the minimum DLCI value over which this LSR is willing to accept traffic on this interface. | 1.3.6.1.2.1.10.166.10.1.1.1.1 | DLCI | read-create | current |
| mplsLcFrStdTrafficMaxDlci OBJECT-TYPE This is the max DLCI value over which this LSR is willing to accept traffic on this interface. | 1.3.6.1.2.1.10.166.10.1.1.1.2 | DLCI | read-create | current |
| mplsLcFrStdCtrlMinDlci OBJECT-TYPE This is the min DLCI value over which this LSR is willing to accept control traffic on this interface. | 1.3.6.1.2.1.10.166.10.1.1.1.3 | DLCI | read-create | current |
| mplsLcFrStdCtrlMaxDlci OBJECT-TYPE This is the max DLCI value over which this LSR is willing to accept control traffic on this interface. | 1.3.6.1.2.1.10.166.10.1.1.1.4 | DLCI | read-create | current |
| mplsLcFrStdInterfaceConfRowStatus OBJECT-TYPE This object is used to create and delete entries in this table. When configuring entries in this table, the corresponding ifEntry and mplsInterfaceConfEntry MUST exist beforehand. If a manager attempts to create an entry for a corresponding mplsInterfaceConfEntry that does not support LC-FR, the agent MUST return an inconsistentValue error. If this table is implemented read-only, then the agent must set this object to active(1) when this row is made active. If this table is implemented writable, then an agent MUST not allow modification to its objects once this value is set to active(1), except to mplsLcFrStdInterfaceConfRowStatus and mplsLcFrStdInterfaceConfStorageType. | 1.3.6.1.2.1.10.166.10.1.1.1.5 | RowStatus | read-create | current |
| mplsLcFrStdInterfaceConfStorageType OBJECT-TYPE The storage type for this conceptual row. Conceptual rows having the value 'permanent(4)' need not allow write-access to any columnar objects in the row. | 1.3.6.1.2.1.10.166.10.1.1.1.6 | StorageType | read-create | current |
| mplsLcFrStdConformance OBJECT-IDENTITY | 1.3.6.1.2.1.10.166.10.2 | |||
| mplsLcFrStdCompliances OBJECT-IDENTITY | 1.3.6.1.2.1.10.166.10.2.1 | |||
| mplsLcFrStdGroups OBJECT-IDENTITY | 1.3.6.1.2.1.10.166.10.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| mplsLcFrStdModuleFullCompliance MODULE-COMPLIANCE Compliance statement for agents that provide full support for MPLS-LC-FR-STD-MIB. Such devices can be monitored and also be configured using this MIB module. | 1.3.6.1.2.1.10.166.10.2.1.1 | current |
| mplsLcFrStdModuleReadOnlyCompliance MODULE-COMPLIANCE Compliance requirement for implementations that only provide read-only support for MPLS-LC-FR-STD-MIB. Such devices can be monitored but cannot be configured using this MIB module. | 1.3.6.1.2.1.10.166.10.2.1.2 | current |
| mplsLcFrStdIfGroup OBJECT-GROUP Collection of objects needed for MPLS LC-FR interface configuration. | 1.3.6.1.2.1.10.166.10.2.2.1 | current |