MPLS-L3VPN-STD-MIB
- Registered at
- 1.3.6.1.2.1.10.166.11
- Last updated
- 2006-01-23 00:00
- Organization
- IETF Layer-3 Virtual Private Networks Working Group.
- Revisions
- 2006-01-23 00:00
- Namespace
- standard
- Source file
MPLS-L3VPN-STD-MIB- Digest
sha256:785f171e4c28d0f347854ba62a748f4ac25229885555088cf73d7eb90cf6f047
Description
This MIB contains managed object definitions for the Layer-3 Multiprotocol Label Switching Virtual Private Networks. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC4382; see the RFC itself for full legal notices.
Contact
Thomas D. Nadeau tnadeau@cisco.com Harmen van der Linde havander@cisco.com Comments and discussion to l3vpn@ietf.org
Imports
| From | Symbols |
|---|---|
| IANA-RTPROTO-MIB | IANAipRouteProtocol |
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress, InetAddressPrefixLength, InetAddressType, InetAutonomousSystemNumber |
| MPLS-LSR-STD-MIB | MplsIndexType |
| MPLS-TC-STD-MIB | mplsStdMIB |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, StorageType, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
| VPN-TC-STD-MIB | VPNIdOrZero |
Imported by
3 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANA-ADDRESS-FAMILY-NUMBERS-MIB IANA-RTPROTO-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB MPLS-L3VPN-STD-MIB MPLS-LSR-STD-MIB MPLS-TC-STD-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC VPN-TC-STD-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| MplsL3VpnName TEXTUAL-CONVENTION An identifier that is assigned to each MPLS/BGP VPN and is used to uniquely identify it. This is assigned by the system operator or NMS and SHOULD be unique throughout the MPLS domain. If this is the case, then this identifier can then be used at any LSR within a specific MPLS domain to identify this MPLS/BGP VPN. It may also be possible to preserve the uniqueness of this identifier across MPLS domain boundaries, in which case this identifier can then be used to uniquely identify MPLS/BGP VPNs on a more global basis. This object MAY be set to the VPN ID as defined in RFC 2685. | current | |||
| MplsL3VpnRouteDistinguisher TEXTUAL-CONVENTION Syntax for a route distinguisher and route target as defined in [RFC4364]. | current | |||
| MplsL3VpnRtType TEXTUAL-CONVENTION Used to define the type of a route target usage. Route targets can be specified to be imported, exported, or both. For a complete definition of a route target, see [RFC4364]. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| mplsL3VpnNotifications OBJECT-IDENTITY | 1.3.6.1.2.1.10.166.11.0 | |||
| mplsL3VpnObjects OBJECT-IDENTITY | 1.3.6.1.2.1.10.166.11.1 | |||
| mplsL3VpnScalars OBJECT-IDENTITY | 1.3.6.1.2.1.10.166.11.1.1 | |||
| mplsL3VpnConfiguredVrfs OBJECT-TYPE The number of VRFs that are configured on this node. | 1.3.6.1.2.1.10.166.11.1.1.1 | Unsigned32 | read-only | current |
| mplsL3VpnActiveVrfs OBJECT-TYPE The number of VRFs that are active on this node. That is, those VRFs whose corresponding mplsL3VpnVrfOperStatus object value is equal to operational (1). | 1.3.6.1.2.1.10.166.11.1.1.2 | Gauge32 | read-only | current |
| mplsL3VpnConnectedInterfaces OBJECT-TYPE Total number of interfaces connected to a VRF. | 1.3.6.1.2.1.10.166.11.1.1.3 | Gauge32 | read-only | current |
| mplsL3VpnNotificationEnable OBJECT-TYPE If this object is true, then it enables the generation of all notifications defined in this MIB. This object's value should be preserved across agent reboots. | 1.3.6.1.2.1.10.166.11.1.1.4 | TruthValue | read-write | current |
| mplsL3VpnVrfConfMaxPossRts OBJECT-TYPE Denotes maximum number of routes that the device will allow all VRFs jointly to hold. If this value is set to 0, this indicates that the device is unable to determine the absolute maximum. In this case, the configured maximum MAY not actually be allowed by the device. | 1.3.6.1.2.1.10.166.11.1.1.5 | Unsigned32 | read-only | current |
| mplsL3VpnVrfConfRteMxThrshTime OBJECT-TYPE Denotes the interval in seconds, at which the route max threshold notification may be reissued after the maximum value has been exceeded (or has been reached if mplsL3VpnVrfConfMaxRoutes and mplsL3VpnVrfConfHighRteThresh are equal) and the initial notification has been issued. This value is intended to prevent continuous generation of notifications by an agent in the event that routes are continually added to a VRF after it has reached its maximum value. If this value is set to 0, the agent should only issue a single notification at the time that the maximum threshold has been reached, and should not issue any more notifications until the value of routes has fallen below the configured threshold value. This is the recommended default behavior. | 1.3.6.1.2.1.10.166.11.1.1.6 | Unsigned32 | read-only | current |
| mplsL3VpnIllLblRcvThrsh OBJECT-TYPE The number of illegally received labels above which the mplsNumVrfSecIllglLblThrshExcd notification is issued. The persistence of this value mimics that of the device's configuration. | 1.3.6.1.2.1.10.166.11.1.1.7 | Unsigned32 | read-write | current |
| mplsL3VpnConf OBJECT-IDENTITY | 1.3.6.1.2.1.10.166.11.1.2 | |||
| mplsL3VpnIfConfTable OBJECT-TYPE This table specifies per-interface MPLS capability and associated information. | 1.3.6.1.2.1.10.166.11.1.2.1 | not-accessible | current | |
| mplsL3VpnIfConfEntry OBJECT-TYPE An entry in this table is created by an LSR for every interface capable of supporting MPLS L3VPN. Each entry in this table is meant to correspond to an entry in the Interfaces Table. | 1.3.6.1.2.1.10.166.11.1.2.1.1 | not-accessible | current | |
| mplsL3VpnIfConfIndex OBJECT-TYPE This is a unique index for an entry in the mplsL3VpnIfConfTable. A non-zero index for an entry indicates the ifIndex for the corresponding interface entry in the MPLS-VPN-layer in the ifTable. Note that this table does not necessarily correspond one-to-one with all entries in the Interface MIB having an ifType of MPLS-layer; rather, only those that are enabled for MPLS L3VPN functionality. | 1.3.6.1.2.1.10.166.11.1.2.1.1.1 | InterfaceIndex | not-accessible | current |
| mplsL3VpnIfVpnClassification OBJECT-TYPE Denotes whether this link participates in a carrier's carrier, enterprise, or inter-provider scenario. | 1.3.6.1.2.1.10.166.11.1.2.1.1.2 | INTEGER {carrierOfCarrier(1), enterprise(2), interProvider(3)} | read-create | current |
| mplsL3VpnIfVpnRouteDistProtocol OBJECT-TYPE Denotes the route distribution protocol across the PE-CE link. Note that more than one routing protocol may be enabled at the same time; thus, this object is specified as a bitmask. For example, static(5) and ospf(2) are a typical configuration. | 1.3.6.1.2.1.10.166.11.1.2.1.1.3 | Bits {none(0), bgp(1), ospf(2), rip(3), isis(4), static(5), other(6)} | read-create | current |
| mplsL3VpnIfConfStorageType OBJECT-TYPE The storage type for this VPN If entry. Conceptual rows having the value 'permanent' need not allow write access to any columnar objects in the row. | 1.3.6.1.2.1.10.166.11.1.2.1.1.4 | StorageType | read-create | current |
| mplsL3VpnIfConfRowStatus OBJECT-TYPE This variable is used to create, modify, and/or delete a row in this table. Rows in this table signify that the specified interface is associated with this VRF. If the row creation operation succeeds, the interface will have been associated with the specified VRF, otherwise the agent MUST not allow the association. If the agent only allows read-only operations on this table, it MUST create entries in this table as they are created on the device. When a row in this table is in active(1) state, no objects in that row can be modified except mplsL3VpnIfConfStorageType and mplsL3VpnIfConfRowStatus. | 1.3.6.1.2.1.10.166.11.1.2.1.1.5 | RowStatus | read-create | current |
| mplsL3VpnVrfTable OBJECT-TYPE This table specifies per-interface MPLS L3VPN VRF Table capability and associated information. Entries in this table define VRF routing instances associated with MPLS/VPN interfaces. Note that multiple interfaces can belong to the same VRF instance. The collection of all VRF instances comprises an actual VPN. | 1.3.6.1.2.1.10.166.11.1.2.2 | not-accessible | current | |
| mplsL3VpnVrfEntry OBJECT-TYPE An entry in this table is created by an LSR for every VRF capable of supporting MPLS L3VPN. The indexing provides an ordering of VRFs per-VPN interface. | 1.3.6.1.2.1.10.166.11.1.2.2.1 | not-accessible | current | |
| mplsL3VpnVrfName OBJECT-TYPE The human-readable name of this VPN. This MAY be equivalent to the [RFC2685] VPN-ID, but may also vary. If it is set to the VPN ID, it MUST be equivalent to the value of mplsL3VpnVrfVpnId. It is strongly recommended that all sites supporting VRFs that are part of the same VPN use the same naming convention for VRFs as well as the same VPN ID. | 1.3.6.1.2.1.10.166.11.1.2.2.1.1 | MplsL3VpnName | not-accessible | current |
| mplsL3VpnVrfVpnId OBJECT-TYPE The VPN ID as specified in [RFC2685]. If a VPN ID has not been specified for this VRF, then this variable SHOULD be set to a zero-length OCTET STRING. | 1.3.6.1.2.1.10.166.11.1.2.2.1.2 | VPNIdOrZero | read-create | current |
| mplsL3VpnVrfDescription OBJECT-TYPE The human-readable description of this VRF. | 1.3.6.1.2.1.10.166.11.1.2.2.1.3 | SnmpAdminString | read-create | current |
| mplsL3VpnVrfRD OBJECT-TYPE The route distinguisher for this VRF. | 1.3.6.1.2.1.10.166.11.1.2.2.1.4 | MplsL3VpnRouteDistinguisher | read-create | current |
| mplsL3VpnVrfCreationTime OBJECT-TYPE The time at which this VRF entry was created. | 1.3.6.1.2.1.10.166.11.1.2.2.1.5 | TimeStamp | read-only | current |
| mplsL3VpnVrfOperStatus OBJECT-TYPE Denotes whether or not a VRF is operational. A VRF is up(1) when there is at least one interface associated with the VRF whose ifOperStatus is up(1). A VRF is down(2) when: a. There does not exist at least one interface whose ifOperStatus is up(1). b. There are no interfaces associated with the VRF. | 1.3.6.1.2.1.10.166.11.1.2.2.1.6 | INTEGER {up(1), down(2)} | read-only | current |
| mplsL3VpnVrfActiveInterfaces OBJECT-TYPE Total number of interfaces connected to this VRF with ifOperStatus = up(1). This value should increase when an interface is associated with the corresponding VRF and its corresponding ifOperStatus is equal to up(1). If an interface is associated whose ifOperStatus is not up(1), then the value is not incremented until such time as it transitions to this state. This value should be decremented when an interface is disassociated with a VRF or the corresponding ifOperStatus transitions out of the up(1) state to any other state. | 1.3.6.1.2.1.10.166.11.1.2.2.1.7 | Gauge32 | read-only | current |
| mplsL3VpnVrfAssociatedInterfaces OBJECT-TYPE Total number of interfaces connected to this VRF (independent of ifOperStatus type). | 1.3.6.1.2.1.10.166.11.1.2.2.1.8 | Unsigned32 | read-only | current |
| mplsL3VpnVrfConfMidRteThresh OBJECT-TYPE Denotes mid-level water marker for the number of routes that this VRF may hold. | 1.3.6.1.2.1.10.166.11.1.2.2.1.9 | Unsigned32 | read-create | current |
| mplsL3VpnVrfConfHighRteThresh OBJECT-TYPE Denotes high-level water marker for the number of routes that this VRF may hold. | 1.3.6.1.2.1.10.166.11.1.2.2.1.10 | Unsigned32 | read-create | current |
| mplsL3VpnVrfConfMaxRoutes OBJECT-TYPE Denotes maximum number of routes that this VRF is configured to hold. This value MUST be less than or equal to mplsL3VpnVrfConfMaxPossRts unless it is set to 0. | 1.3.6.1.2.1.10.166.11.1.2.2.1.11 | Unsigned32 | read-create | current |
| mplsL3VpnVrfConfLastChanged OBJECT-TYPE The value of sysUpTime at the time of the last change of this table entry, which includes changes of VRF parameters defined in this table or addition or deletion of interfaces associated with this VRF. | 1.3.6.1.2.1.10.166.11.1.2.2.1.12 | TimeStamp | read-only | current |
| mplsL3VpnVrfConfRowStatus OBJECT-TYPE This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified except mplsL3VpnVrfConfAdminStatus, mplsL3VpnVrfConfRowStatus, and mplsL3VpnVrfConfStorageType. | 1.3.6.1.2.1.10.166.11.1.2.2.1.13 | RowStatus | read-create | current |
| mplsL3VpnVrfConfAdminStatus OBJECT-TYPE Indicates the desired operational status of this VRF. | 1.3.6.1.2.1.10.166.11.1.2.2.1.14 | INTEGER {up(1), down(2), testing(3)} | read-create | current |
| mplsL3VpnVrfConfStorageType OBJECT-TYPE The storage type for this VPN VRF entry. Conceptual rows having the value 'permanent' need not allow write access to any columnar objects in the row. | 1.3.6.1.2.1.10.166.11.1.2.2.1.15 | StorageType | read-create | current |
| mplsL3VpnVrfRTTable OBJECT-TYPE This table specifies per-VRF route target association. Each entry identifies a connectivity policy supported as part of a VPN. | 1.3.6.1.2.1.10.166.11.1.2.3 | not-accessible | current | |
| mplsL3VpnVrfRTEntry OBJECT-TYPE An entry in this table is created by an LSR for each route target configured for a VRF supporting a MPLS L3VPN instance. The indexing provides an ordering per-VRF instance. See [RFC4364] for a complete definition of a route target. | 1.3.6.1.2.1.10.166.11.1.2.3.1 | not-accessible | current | |
| mplsL3VpnVrfRTIndex OBJECT-TYPE Auxiliary index for route targets configured for a particular VRF. | 1.3.6.1.2.1.10.166.11.1.2.3.1.2 | Unsigned32 (1..4294967295) | not-accessible | current |
| mplsL3VpnVrfRTType OBJECT-TYPE The route target distribution type. | 1.3.6.1.2.1.10.166.11.1.2.3.1.3 | MplsL3VpnRtType | not-accessible | current |
| mplsL3VpnVrfRT OBJECT-TYPE The route target distribution policy. | 1.3.6.1.2.1.10.166.11.1.2.3.1.4 | MplsL3VpnRouteDistinguisher | read-create | current |
| mplsL3VpnVrfRTDescr OBJECT-TYPE Description of the route target. | 1.3.6.1.2.1.10.166.11.1.2.3.1.5 | SnmpAdminString | read-create | current |
| mplsL3VpnVrfRTRowStatus OBJECT-TYPE This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified except mplsL3VpnVrfRTRowStatus. | 1.3.6.1.2.1.10.166.11.1.2.3.1.6 | RowStatus | read-create | current |
| mplsL3VpnVrfRTStorageType OBJECT-TYPE The storage type for this VPN route target (RT) entry. Conceptual rows having the value 'permanent' need not allow write access to any columnar objects in the row. | 1.3.6.1.2.1.10.166.11.1.2.3.1.7 | StorageType | read-create | current |
| mplsL3VpnVrfSecTable OBJECT-TYPE This table specifies per MPLS L3VPN VRF Table security-related counters. | 1.3.6.1.2.1.10.166.11.1.2.6 | not-accessible | current | |
| mplsL3VpnVrfSecEntry OBJECT-TYPE An entry in this table is created by an LSR for every VRF capable of supporting MPLS L3VPN. Each entry in this table is used to indicate security-related information for each VRF entry. | 1.3.6.1.2.1.10.166.11.1.2.6.1 | not-accessible | current | |
| mplsL3VpnVrfSecIllegalLblVltns OBJECT-TYPE Indicates the number of illegally received labels on this VPN/VRF. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of mplsL3VpnVrfSecDiscontinuityTime. | 1.3.6.1.2.1.10.166.11.1.2.6.1.1 | Counter32 | read-only | current |
| mplsL3VpnVrfSecDiscontinuityTime OBJECT-TYPE The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value. | 1.3.6.1.2.1.10.166.11.1.2.6.1.2 | TimeStamp | read-only | current |
| mplsL3VpnPerf OBJECT-IDENTITY | 1.3.6.1.2.1.10.166.11.1.3 | |||
| mplsL3VpnVrfPerfTable OBJECT-TYPE This table specifies per MPLS L3VPN VRF Table performance information. | 1.3.6.1.2.1.10.166.11.1.3.1 | not-accessible | current | |
| mplsL3VpnVrfPerfEntry OBJECT-TYPE An entry in this table is created by an LSR for every VRF capable of supporting MPLS L3VPN. | 1.3.6.1.2.1.10.166.11.1.3.1.1 | not-accessible | current | |
| mplsL3VpnVrfPerfRoutesAdded OBJECT-TYPE Indicates the number of routes added to this VPN/VRF since the last discontinuity. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of mplsL3VpnVrfPerfDiscTime. | 1.3.6.1.2.1.10.166.11.1.3.1.1.1 | Counter32 | read-only | current |
| mplsL3VpnVrfPerfRoutesDeleted OBJECT-TYPE Indicates the number of routes removed from this VPN/VRF. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of mplsL3VpnVrfPerfDiscTime. | 1.3.6.1.2.1.10.166.11.1.3.1.1.2 | Counter32 | read-only | current |
| mplsL3VpnVrfPerfCurrNumRoutes OBJECT-TYPE Indicates the number of routes currently used by this VRF. | 1.3.6.1.2.1.10.166.11.1.3.1.1.3 | Gauge32 | read-only | current |
| mplsL3VpnVrfPerfRoutesDropped OBJECT-TYPE This counter should be incremented when the number of routes contained by the specified VRF exceeds or attempts to exceed the maximum allowed value as indicated by mplsL3VpnVrfMaxRouteThreshold. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of mplsL3VpnVrfPerfDiscTime. | 1.3.6.1.2.1.10.166.11.1.3.1.1.4 | Counter32 | read-only | current |
| mplsL3VpnVrfPerfDiscTime OBJECT-TYPE The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value. | 1.3.6.1.2.1.10.166.11.1.3.1.1.5 | TimeStamp | read-only | current |
| mplsL3VpnRoute OBJECT-IDENTITY | 1.3.6.1.2.1.10.166.11.1.4 | |||
| mplsL3VpnVrfRteTable OBJECT-TYPE This table specifies per-interface MPLS L3VPN VRF Table routing information. Entries in this table define VRF routing entries associated with the specified MPLS/VPN interfaces. Note that this table contains both BGP and Interior Gateway Protocol IGP routes, as both may appear in the same VRF. | 1.3.6.1.2.1.10.166.11.1.4.1 | not-accessible | current | |
| mplsL3VpnVrfRteEntry OBJECT-TYPE An entry in this table is created by an LSR for every route present configured (either dynamically or statically) within the context of a specific VRF capable of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface. Implementers need to be aware that there are quite a few index objects that together can exceed the size allowed for an Object Identifier (OID). So implementers must make sure that OIDs of column instances in this table will have no more than 128 sub-identifiers, otherwise they cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. | 1.3.6.1.2.1.10.166.11.1.4.1.1 | not-accessible | current | |
| mplsL3VpnVrfRteInetCidrDestType OBJECT-TYPE The type of the mplsL3VpnVrfRteInetCidrDest address, as defined in the InetAddress MIB. Only those address types that may appear in an actual routing table are allowed as values of this object. | 1.3.6.1.2.1.10.166.11.1.4.1.1.1 | InetAddressType | not-accessible | current |
| mplsL3VpnVrfRteInetCidrDest OBJECT-TYPE The destination IP address of this route. The type of this address is determined by the value of the mplsL3VpnVrfRteInetCidrDestType object. The values for the index objects mplsL3VpnVrfRteInetCidrDest and mplsL3VpnVrfRteInetCidrPfxLen must be consistent. When the value of mplsL3VpnVrfRteInetCidrDest is x, then the bitwise logical-AND of x with the value of the mask formed from the corresponding index object mplsL3VpnVrfRteInetCidrPfxLen MUST be equal to x. If not, then the index pair is not consistent and an inconsistentName error must be returned on SET or CREATE requests. | 1.3.6.1.2.1.10.166.11.1.4.1.1.2 | InetAddress | not-accessible | current |
| mplsL3VpnVrfRteInetCidrPfxLen OBJECT-TYPE Indicates the number of leading one bits that form the mask to be logical-ANDed with the destination address before being compared to the value in the mplsL3VpnVrfRteInetCidrDest field. The values for the index objects mplsL3VpnVrfRteInetCidrDest and mplsL3VpnVrfRteInetCidrPfxLen must be consistent. When the value of mplsL3VpnVrfRteInetCidrDest is x, then the bitwise logical-AND of x with the value of the mask formed from the corresponding index object mplsL3VpnVrfRteInetCidrPfxLen MUST be equal to x. If not, then the index pair is not consistent and an inconsistentName error must be returned on SET or CREATE requests. | 1.3.6.1.2.1.10.166.11.1.4.1.1.3 | InetAddressPrefixLength (0..128) | not-accessible | current |
| mplsL3VpnVrfRteInetCidrPolicy OBJECT-TYPE This object is an opaque object without any defined semantics. Its purpose is to serve as an additional index that may delineate between multiple entries to the same destination. The value { 0 0 } shall be used as the default value for this object. | 1.3.6.1.2.1.10.166.11.1.4.1.1.4 | OBJECT IDENTIFIER | not-accessible | current |
| mplsL3VpnVrfRteInetCidrNHopType OBJECT-TYPE The type of the mplsL3VpnVrfRteInetCidrNextHop address, as defined in the InetAddress MIB. Value should be set to unknown(0) for non-remote routes. Only those address types that may appear in an actual routing table are allowed as values of this object. | 1.3.6.1.2.1.10.166.11.1.4.1.1.5 | InetAddressType | not-accessible | current |
| mplsL3VpnVrfRteInetCidrNextHop OBJECT-TYPE On remote routes, the address of the next system en route. For non-remote routes, a zero-length string. The type of this address is determined by the value of the mplsL3VpnVrfRteInetCidrNHopType object. | 1.3.6.1.2.1.10.166.11.1.4.1.1.6 | InetAddress | not-accessible | current |
| mplsL3VpnVrfRteInetCidrIfIndex OBJECT-TYPE The ifIndex value that identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the scenario where no interface is specified. | 1.3.6.1.2.1.10.166.11.1.4.1.1.7 | InterfaceIndexOrZero | read-create | current |
| mplsL3VpnVrfRteInetCidrType OBJECT-TYPE The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destination. Routes that do not result in traffic forwarding or rejection should not be displayed even if the implementation keeps them stored internally. reject(2) refers to a route that, if matched, discards the message as unreachable and returns a notification (e.g., ICMP error) to the message sender. This is used in some protocols as a means of correctly aggregating routes. blackhole(5) refers to a route that, if matched, discards the message silently. | 1.3.6.1.2.1.10.166.11.1.4.1.1.8 | INTEGER {other(1), reject(2), local(3), remote(4), blackhole(5)} | read-create | current |
| mplsL3VpnVrfRteInetCidrProto OBJECT-TYPE The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols. | 1.3.6.1.2.1.10.166.11.1.4.1.1.9 | IANAipRouteProtocol | read-only | current |
| mplsL3VpnVrfRteInetCidrAge OBJECT-TYPE The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of 'too old' can be implied except through knowledge of the routing protocol by which the route was learned. | 1.3.6.1.2.1.10.166.11.1.4.1.1.10 | Gauge32 | read-only | current |
| mplsL3VpnVrfRteInetCidrNextHopAS OBJECT-TYPE The Autonomous System Number of the next hop. The semantics of this object are determined by the routing protocol specified in the route's mplsL3VpnVrfRteInetCidrProto value. When this object is unknown or not relevant, its value should be set to zero. | 1.3.6.1.2.1.10.166.11.1.4.1.1.11 | InetAutonomousSystemNumber | read-create | current |
| mplsL3VpnVrfRteInetCidrMetric1 OBJECT-TYPE The primary routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's mplsL3VpnVrfRteInetCidrProto value. If this metric is not used, its value should be set to -1. | 1.3.6.1.2.1.10.166.11.1.4.1.1.12 | Integer32 (-1 | 0..2147483647) | read-create | current |
| mplsL3VpnVrfRteInetCidrMetric2 OBJECT-TYPE An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's mplsL3VpnVrfRteInetCidrProto value. If this metric is not used, its value should be set to -1. | 1.3.6.1.2.1.10.166.11.1.4.1.1.13 | Integer32 (-1 | 0..2147483647) | read-create | current |
| mplsL3VpnVrfRteInetCidrMetric3 OBJECT-TYPE An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's mplsL3VpnVrfRteInetCidrProto value. If this metric is not used, its value should be set to -1. | 1.3.6.1.2.1.10.166.11.1.4.1.1.14 | Integer32 (-1 | 0..2147483647) | read-create | current |
| mplsL3VpnVrfRteInetCidrMetric4 OBJECT-TYPE An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's mplsL3VpnVrfRteInetCidrProto value. If this metric is not used, its value should be set to -1. | 1.3.6.1.2.1.10.166.11.1.4.1.1.15 | Integer32 (-1 | 0..2147483647) | read-create | current |
| mplsL3VpnVrfRteInetCidrMetric5 OBJECT-TYPE An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's mplsL3VpnVrfRteInetCidrProto value. If this metric is not used, its value should be set to -1. | 1.3.6.1.2.1.10.166.11.1.4.1.1.16 | Integer32 (-1 | 0..2147483647) | read-create | current |
| mplsL3VpnVrfRteXCPointer OBJECT-TYPE Index into mplsXCTable that identifies which cross- connect entry is associated with this VRF route entry by containing the mplsXCIndex of that cross-connect entry. The string containing the single-octet 0x00 indicates that a label stack is not associated with this route entry. This can be the case because the label bindings have not yet been established, or because some change in the agent has removed them. When the label stack associated with this VRF route is created, it MUST establish the associated cross-connect entry in the mplsXCTable and then set that index to the value of this object. Changes to the cross-connect object in the mplsXCTable MUST automatically be reflected in the value of this object. If this object represents a static routing entry, then the manager must ensure that this entry is maintained consistently in the corresponding mplsXCTable as well. | 1.3.6.1.2.1.10.166.11.1.4.1.1.17 | MplsIndexType | read-create | current |
| mplsL3VpnVrfRteInetCidrStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. A row entry cannot be modified when the status is marked as active(1). | 1.3.6.1.2.1.10.166.11.1.4.1.1.18 | RowStatus | read-create | current |
| mplsL3VpnConformance OBJECT-IDENTITY | 1.3.6.1.2.1.10.166.11.2 | |||
| mplsL3VpnGroups OBJECT-IDENTITY | 1.3.6.1.2.1.10.166.11.2.1 | |||
| mplsL3VpnCompliances OBJECT-IDENTITY | 1.3.6.1.2.1.10.166.11.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| mplsL3VpnVrfUp NOTIFICATION-TYPE This notification is generated when: a. No interface is associated with this VRF, and the first (and only first) interface associated with it has its ifOperStatus change to up(1). b. One interface is associated with this VRF, and the ifOperStatus of this interface changes to up(1). c. Multiple interfaces are associated with this VRF, and the ifOperStatus of all interfaces is down(2), and the first of those interfaces has its ifOperStatus change to up(1). | 1.3.6.1.2.1.10.166.11.0.1 | current |
| mplsL3VpnVrfDown NOTIFICATION-TYPE This notification is generated when: a. One interface is associated with this VRF, and the ifOperStatus of this interface changes from up(1) to down(2). b. Multiple interfaces are associated with this VRF, and the ifOperStatus of all except one of these interfaces is equal to up(1), and the ifOperStatus of that interface changes from up(1) to down(2). c. The last interface with ifOperStatus equal to up(1) is disassociated from a VRF. | 1.3.6.1.2.1.10.166.11.0.2 | current |
| mplsL3VpnVrfRouteMidThreshExceeded NOTIFICATION-TYPE This notification is generated when the number of routes contained by the specified VRF exceeds the value indicated by mplsL3VpnVrfMidRouteThreshold. A single notification MUST be generated when this threshold is exceeded, and no other notifications of this type should be issued until the value of mplsL3VpnVrfPerfCurrNumRoutes has fallen below that of mplsL3VpnVrfConfMidRteThresh. | 1.3.6.1.2.1.10.166.11.0.3 | current |
| mplsL3VpnVrfNumVrfRouteMaxThreshExceeded NOTIFICATION-TYPE This notification is generated when the number of routes contained by the specified VRF exceeds or attempts to exceed the maximum allowed value as indicated by mplsL3VpnVrfMaxRouteThreshold. In cases where mplsL3VpnVrfConfHighRteThresh is set to the same value as mplsL3VpnVrfConfMaxRoutes, mplsL3VpnVrfConfHighRteThresh need not be exceeded; rather, just reached for this notification to be issued. Note that mplsL3VpnVrfConfRteMxThrshTime denotes the interval at which the this notification will be reissued after the maximum value has been exceeded (or reached if mplsL3VpnVrfConfMaxRoutes and mplsL3VpnVrfConfHighRteThresh are equal) and the initial notification has been issued. This value is intended to prevent continuous generation of notifications by an agent in the event that routes are continually added to a VRF after it has reached its maximum value. The default value is 0 minutes. If this value is set to 0, the agent should only issue a single notification at the time that the maximum threshold has been reached, and should not issue any more notifications until the value of routes has fallen below the configured threshold value. | 1.3.6.1.2.1.10.166.11.0.4 | current |
| mplsL3VpnNumVrfSecIllglLblThrshExcd NOTIFICATION-TYPE This notification is generated when the number of illegal label violations on a VRF as indicated by mplsL3VpnVrfSecIllegalLblVltns has exceeded mplsL3VpnIllLblRcvThrsh. The threshold is not included in the varbind here because the value of mplsL3VpnVrfSecIllegalLblVltns should be one greater than the threshold at the time this notification is issued. | 1.3.6.1.2.1.10.166.11.0.5 | current |
| mplsL3VpnNumVrfRouteMaxThreshCleared NOTIFICATION-TYPE This notification is generated only after the number of routes contained by the specified VRF exceeds or attempts to exceed the maximum allowed value as indicated by mplsVrfMaxRouteThreshold, and then falls below this value. The emission of this notification informs the operator that the error condition has been cleared without the operator having to query the device. Note that mplsL3VpnVrfConfRteMxThrshTime denotes the interval at which the mplsNumVrfRouteMaxThreshExceeded notification will be reissued after the maximum value has been exceeded (or reached if mplsL3VpnVrfConfMaxRoutes and mplsL3VpnVrfConfHighRteThresh are equal) and the initial notification has been issued. Therefore, the generation of this notification should also be emitted with this same frequency (assuming that the error condition is cleared). Specifically, if the error condition is reached and cleared several times during the period of time specified in mplsL3VpnVrfConfRteMxThrshTime, only a single notification will be issued to indicate the first instance of the error condition as well as the first time the error condition is cleared. This behavior is intended to prevent continuous generation of notifications by an agent in the event that routes are continually added and removed to/from a VRF after it has reached its maximum value. The default value is 0. If this value is set to 0, the agent should issue a notification whenever the maximum threshold has been cleared. | 1.3.6.1.2.1.10.166.11.0.6 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| mplsL3VpnScalarGroup OBJECT-GROUP Collection of scalar objects required for MPLS VPN management. | 1.3.6.1.2.1.10.166.11.2.1.1 | current |
| mplsL3VpnVrfGroup OBJECT-GROUP Collection of objects needed for MPLS VPN VRF management. | 1.3.6.1.2.1.10.166.11.2.1.2 | current |
| mplsL3VpnIfGroup OBJECT-GROUP Collection of objects needed for MPLS VPN interface management. | 1.3.6.1.2.1.10.166.11.2.1.3 | current |
| mplsL3VpnPerfGroup OBJECT-GROUP Collection of objects needed for MPLS VPN performance information. | 1.3.6.1.2.1.10.166.11.2.1.4 | current |
| mplsL3VpnPerfRouteGroup OBJECT-GROUP Collection of objects needed to track MPLS VPN routing table dropped routes. | 1.3.6.1.2.1.10.166.11.2.1.5 | current |
| mplsL3VpnSecGroup OBJECT-GROUP Collection of objects needed for MPLS VPN security-related information. | 1.3.6.1.2.1.10.166.11.2.1.7 | current |
| mplsL3VpnVrfRteGroup OBJECT-GROUP Objects required for VRF route table management. | 1.3.6.1.2.1.10.166.11.2.1.8 | current |
| mplsL3VpnVrfRTGroup OBJECT-GROUP Objects required for VRF route target management. | 1.3.6.1.2.1.10.166.11.2.1.9 | current |
| mplsL3VpnNotificationGroup NOTIFICATION-GROUP Objects required for MPLS VPN notifications. | 1.3.6.1.2.1.10.166.11.2.1.10 | current |
| mplsL3VpnModuleFullCompliance MODULE-COMPLIANCE Compliance statement for agents that provide full support for the MPLS-L3VPN-STD-MIB | 1.3.6.1.2.1.10.166.11.2.2.1 | current |
| mplsL3VpnModuleReadOnlyCompliance MODULE-COMPLIANCE Compliance requirement for implementations that only provide read-only support for MPLS-L3VPN-STD-MIB. Such devices can then be monitored but cannot be configured using this MIB module. | 1.3.6.1.2.1.10.166.11.2.2.2 | current |