MIBs Depot

MOXA-EDSG508E-MIB

Registered at
1.3.6.1.4.1.8691.7.69
Last updated
2016-07-15 00:00
Organization
Moxa Inc.
Revisions
2016-07-15 00:00, 2015-06-30 00:00, 2013-10-02 00:00
Namespace
moxa
Source file
MOXA-EDSG508E-MIB
Digest
sha256:2eae041653f6c6094f3822fd4bc1e353794e1f1c4f5f8916b0f64f9c6f9264e2

Description

The MIB module for Moxa EDS-G508E series specific information.

Contact

Postal: Moxa Inc. Fl.4, No.135,Lane 235,Pao-Chiao Rd. Shing Tien City,Taipei,Taiwan,R.O.C Tel: +866-2-89191230

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIIpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso
SNMPv2-TCDateAndTime, DisplayString, MacAddress, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

MOXA-EDSG508E-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
PortList
TEXTUAL-CONVENTION
Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
current

Objects

NameOIDSyntaxAccessStatus
moxa
OBJECT-IDENTITY
1.3.6.1.4.1.8691
industrialEthernet
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7
mibNotificationsPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.0
swMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1
numberOfPorts
OBJECT-TYPE
Total Ports.
1.3.6.1.4.1.8691.7.69.1.1INTEGERread-onlycurrent
switchModel
OBJECT-TYPE
The switch model.
1.3.6.1.4.1.8691.7.69.1.2DisplayStringread-onlycurrent
firmwareVersion
OBJECT-TYPE
The firmware version.
1.3.6.1.4.1.8691.7.69.1.4DisplayStringread-onlycurrent
enableWebConfig
OBJECT-TYPE
This enable the Web. configuration function.
1.3.6.1.4.1.8691.7.69.1.5INTEGER {disable(0), httpOrHttps(1), httpsOnly(2)}read-writecurrent
enableTelnetConsole
OBJECT-TYPE
This enable telnet console.
1.3.6.1.4.1.8691.7.69.1.6INTEGER {disable(0), enable(1)}read-writecurrent
lineSwapRecovery
OBJECT-TYPE
This enable line-swap-fast-recovery function.
1.3.6.1.4.1.8691.7.69.1.7INTEGER {disable(0), enable(1)}read-writecurrent
networkSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.8
switchIpAddr
OBJECT-TYPE
The IP Address of this switch.
1.3.6.1.4.1.8691.7.69.1.8.1IpAddressread-onlycurrent
switchIpMask
OBJECT-TYPE
The netmask of this switch.
1.3.6.1.4.1.8691.7.69.1.8.2IpAddressread-onlycurrent
defaultGateway
OBJECT-TYPE
The default gateway of this switch.
1.3.6.1.4.1.8691.7.69.1.8.3IpAddressread-onlycurrent
enableAutoIpConfig
OBJECT-TYPE
This enable the automatic IP address configuration function.
1.3.6.1.4.1.8691.7.69.1.8.4INTEGER {disable(0), enableDHCP(1), enableBOOTP(2)}read-writecurrent
dnsServer1IpAddr
OBJECT-TYPE
The first DNS server's IP address
1.3.6.1.4.1.8691.7.69.1.8.5IpAddressread-writecurrent
snmpTrapCommunity
OBJECT-TYPE
The SNMP trap community name
1.3.6.1.4.1.8691.7.69.1.8.6DisplayStringread-writecurrent
trapServerAddr
OBJECT-TYPE
The IP address/Domain name of SNMP trap server
1.3.6.1.4.1.8691.7.69.1.8.7DisplayStringread-writecurrent
dnsServer2IpAddr
OBJECT-TYPE
The second DNS server's IP address
1.3.6.1.4.1.8691.7.69.1.8.8IpAddressread-writecurrent
snmpReadCommunity
OBJECT-TYPE
The SNMP read community name
1.3.6.1.4.1.8691.7.69.1.8.9DisplayStringread-writecurrent
snmpTrap2Community
OBJECT-TYPE
The Second SNMP trap community name
1.3.6.1.4.1.8691.7.69.1.8.11DisplayStringread-writecurrent
trap2ServerAddr
OBJECT-TYPE
The IP address/Domain name of Second SNMP trap server
1.3.6.1.4.1.8691.7.69.1.8.12DisplayStringread-writecurrent
snmpInformEnable
OBJECT-TYPE
This enable the snmpInform function.
1.3.6.1.4.1.8691.7.69.1.8.13INTEGER {disable(0), enable(1)}read-writecurrent
snmpInformRetries
OBJECT-TYPE
The snmp inform retry times of SNMP trap server
1.3.6.1.4.1.8691.7.69.1.8.14INTEGER (1..99)read-writecurrent
snmpInformTimeout
OBJECT-TYPE
The snmp inform interval of SNMP trap server
1.3.6.1.4.1.8691.7.69.1.8.15INTEGER (1..300)read-writecurrent
dhcpRetryPeriods
OBJECT-TYPE
The DHCP retry periods.
1.3.6.1.4.1.8691.7.69.1.8.16INTEGERread-writecurrent
dhcpRetryTimes
OBJECT-TYPE
The dhcp retry times.
1.3.6.1.4.1.8691.7.69.1.8.17INTEGERread-writecurrent
trapVersion
OBJECT-TYPE
Version of SNMP trap
1.3.6.1.4.1.8691.7.69.1.8.18INTEGER {snmpv1-Trap(0), snmpv2-Notification(1), snmpv2-Inform(2), snmpv3-Trap(3), snmpv3-Inform(4)}read-writecurrent
snmpVersion
OBJECT-TYPE
Version of SNMP
1.3.6.1.4.1.8691.7.69.1.8.21INTEGER {snmpv1-v2c-v3(1), snmpv1-v2c(2), snmpv3(3)}read-onlycurrent
snmpAdminSecurityLevel
OBJECT-TYPE
Admin security level
1.3.6.1.4.1.8691.7.69.1.8.22INTEGER {noAuthNoPriv(1), authNoPriv(2), authPriv(3)}read-onlycurrent
snmpUserSecurityLevel
OBJECT-TYPE
User security level
1.3.6.1.4.1.8691.7.69.1.8.23INTEGER {noAuthNoPriv(1), authNoPriv(2), authPriv(3)}read-onlycurrent
portSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.9
portTable
OBJECT-TYPE
The port table.
1.3.6.1.4.1.8691.7.69.1.9.1not-accessiblecurrent
portEntry
OBJECT-TYPE
The port entry.
1.3.6.1.4.1.8691.7.69.1.9.1.1not-accessiblecurrent
portIndex
OBJECT-TYPE
The port index.
1.3.6.1.4.1.8691.7.69.1.9.1.1.1INTEGERread-onlycurrent
portDesc
OBJECT-TYPE
The port description
1.3.6.1.4.1.8691.7.69.1.9.1.1.2DisplayStringread-onlycurrent
portEnable
OBJECT-TYPE
This enable the port.
1.3.6.1.4.1.8691.7.69.1.9.1.1.3INTEGER {disable(0), enable(1)}read-writecurrent
portSpeed
OBJECT-TYPE
The port speed and duplex.
1.3.6.1.4.1.8691.7.69.1.9.1.1.4INTEGER {auto(0), speed100M-Full(1), speed100M-Half(2), speed10M-Full(3), speed10M-Half(4), speed1000M-Full(5)}read-writecurrent
portMDI
OBJECT-TYPE
The port MDI/MDIX.
1.3.6.1.4.1.8691.7.69.1.9.1.1.5INTEGER {na(0), auto(1), mdi(2), mdiX(3)}read-writecurrent
portFDXFlowCtrl
OBJECT-TYPE
The port FDX Flow Control
1.3.6.1.4.1.8691.7.69.1.9.1.1.6INTEGER {disable(0), enable(1)}read-writecurrent
portName
OBJECT-TYPE
The port Name
1.3.6.1.4.1.8691.7.69.1.9.1.1.7DisplayStringread-writecurrent
portSubdesc
OBJECT-TYPE
The port second description
1.3.6.1.4.1.8691.7.69.1.9.1.1.8DisplayStringread-onlycurrent
monitor
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.10
power1InputStatus
OBJECT-TYPE
The status of the first power input.
1.3.6.1.4.1.8691.7.69.1.10.1INTEGER {not-present(0), present(1)}read-onlycurrent
power2InputStatus
OBJECT-TYPE
The status of the second power input.
1.3.6.1.4.1.8691.7.69.1.10.2INTEGER {not-present(0), present(1)}read-onlycurrent
monitorPortTable
OBJECT-TYPE
The port table of monitor function.
1.3.6.1.4.1.8691.7.69.1.10.3not-accessiblecurrent
monitorPortEntry
OBJECT-TYPE
The port table entry of monitor function.
1.3.6.1.4.1.8691.7.69.1.10.3.1not-accessiblecurrent
monitorLinkStatus
OBJECT-TYPE
The port link status.
1.3.6.1.4.1.8691.7.69.1.10.3.1.2INTEGER {disable(-1), off(0), on(1)}read-onlycurrent
monitorSpeed
OBJECT-TYPE
The port speed and duplex status.
1.3.6.1.4.1.8691.7.69.1.10.3.1.3INTEGER {na(-1), speed10M-Half(0), speed10M-Full(1), speed100M-Half(2), speed100M-Full(3), speed1000M-Half(4), speed1000M-Full(5)}read-onlycurrent
monitorAutoMDI
OBJECT-TYPE
The port MDI/MDIX status.
1.3.6.1.4.1.8691.7.69.1.10.3.1.4INTEGER {na(-1), mdi(0), mdix(1), auto(2)}read-onlycurrent
monitorTraffic
OBJECT-TYPE
The trafic loading percentage of port.
1.3.6.1.4.1.8691.7.69.1.10.3.1.5INTEGERread-onlycurrent
monitorFDXFlowCtrl
OBJECT-TYPE
The Full-Duplex flow control status
1.3.6.1.4.1.8691.7.69.1.10.3.1.6INTEGER {off(0), on(1)}read-onlycurrent
monitorTxTraffic
OBJECT-TYPE
The TX traffic loading percentage of port.
1.3.6.1.4.1.8691.7.69.1.10.3.1.7INTEGERread-onlycurrent
monitorRxTraffic
OBJECT-TYPE
The RTX traffic loading percentage of port.
1.3.6.1.4.1.8691.7.69.1.10.3.1.8INTEGERread-onlycurrent
monitorDiTable
OBJECT-TYPE
The DI table of monitor function.
1.3.6.1.4.1.8691.7.69.1.10.4not-accessiblecurrent
monitorDiEntry
OBJECT-TYPE
The DI table entry of monitor function.
1.3.6.1.4.1.8691.7.69.1.10.4.1not-accessiblecurrent
diIndex
OBJECT-TYPE
The DI index of monitor function
1.3.6.1.4.1.8691.7.69.1.10.4.1.1INTEGER (1..2)read-onlycurrent
diInputStatus
OBJECT-TYPE
The DI input status.
1.3.6.1.4.1.8691.7.69.1.10.4.1.2INTEGER {off(0), on(1)}read-onlycurrent
powerConsumption
OBJECT-TYPE
Current power comsuption(Watts). Accurate to second decimal place.
1.3.6.1.4.1.8691.7.69.1.10.8DisplayStringread-onlycurrent
monitorFiberCheckTable
OBJECT-TYPE
The Fiber Check table of monitor function.
1.3.6.1.4.1.8691.7.69.1.10.11not-accessiblecurrent
monitorFiberCheckEntry
OBJECT-TYPE
The fiber check table entry of monitor function.
1.3.6.1.4.1.8691.7.69.1.10.11.1not-accessiblecurrent
fiberPort
OBJECT-TYPE
The fiber index of monitor function
1.3.6.1.4.1.8691.7.69.1.10.11.1.1DisplayStringread-onlycurrent
fiberModelName
OBJECT-TYPE
The fiber ModelName of monitor function
1.3.6.1.4.1.8691.7.69.1.10.11.1.2DisplayStringread-onlycurrent
fiberWaveLength
OBJECT-TYPE
The fiber wavelength
1.3.6.1.4.1.8691.7.69.1.10.11.1.3DisplayStringread-onlycurrent
fiberVoltage
OBJECT-TYPE
The fiber Voltage of monitor function
1.3.6.1.4.1.8691.7.69.1.10.11.1.4DisplayStringread-onlycurrent
fiberTemperature
OBJECT-TYPE
The fiber Temperature of monitor function
1.3.6.1.4.1.8691.7.69.1.10.11.1.5DisplayStringread-onlycurrent
fiberTempWarn
OBJECT-TYPE
The Fiber Temperature warning value of monitor function
1.3.6.1.4.1.8691.7.69.1.10.11.1.6DisplayStringread-onlycurrent
fiberTxPower
OBJECT-TYPE
The fiber TX power of monitor function
1.3.6.1.4.1.8691.7.69.1.10.11.1.7DisplayStringread-onlycurrent
fiberTxPowerWarn
OBJECT-TYPE
The fiber TX power warning value of monitor function
1.3.6.1.4.1.8691.7.69.1.10.11.1.8DisplayStringread-onlycurrent
fiberRxPower
OBJECT-TYPE
The fiber RX power of monitor function
1.3.6.1.4.1.8691.7.69.1.10.11.1.9DisplayStringread-onlycurrent
fiberRxPowerWarn
OBJECT-TYPE
The Fiber RX power warning value of monitor function
1.3.6.1.4.1.8691.7.69.1.10.11.1.10DisplayStringread-onlycurrent
fiberSN
OBJECT-TYPE
The fiber serial number
1.3.6.1.4.1.8691.7.69.1.10.11.1.13DisplayStringread-onlycurrent
emailWarning
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.11
emailService
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.11.1
emailWarningSMTPServer
OBJECT-TYPE
The SMTP server's Ip Address/Domain name of email warning function.
1.3.6.1.4.1.8691.7.69.1.11.1.1DisplayStringread-writecurrent
emailWarningFirstRecipientEmailAddr
OBJECT-TYPE
The first recipient email address of email warning function.
1.3.6.1.4.1.8691.7.69.1.11.1.2DisplayStringread-writecurrent
emailWarningSecondRecipientEmailAddr
OBJECT-TYPE
The second recipient email address of email warning function.
1.3.6.1.4.1.8691.7.69.1.11.1.3DisplayStringread-writecurrent
emailWarningThirdRecipientEmailAddr
OBJECT-TYPE
The third recipient email address of email warning function.
1.3.6.1.4.1.8691.7.69.1.11.1.4DisplayStringread-writecurrent
emailWarningFourthRecipientEmailAddr
OBJECT-TYPE
The fourth recipient email address of email warning function.
1.3.6.1.4.1.8691.7.69.1.11.1.5DisplayStringread-writecurrent
emailWarningSMTPPort
OBJECT-TYPE
The SMTP server's port of email warning function.
1.3.6.1.4.1.8691.7.69.1.11.1.6INTEGER (1..65536)read-writecurrent
emailWarningSMTPUser
OBJECT-TYPE
The registered user account for SMTP service of email warning function.
1.3.6.1.4.1.8691.7.69.1.11.1.7DisplayStringread-writecurrent
emailWarningSMTPPassword
OBJECT-TYPE
The registered user password for SMTP service of email warning function.
1.3.6.1.4.1.8691.7.69.1.11.1.8DisplayStringread-writecurrent
emailWarningSMTPTLS
OBJECT-TYPE
The SMTP server use TLS of email warning function.
1.3.6.1.4.1.8691.7.69.1.11.1.9INTEGER {no(0), yes(1)}read-writecurrent
emailWarningSMTPAuthMethod
OBJECT-TYPE
The SMTP server use login method of email warning function.
1.3.6.1.4.1.8691.7.69.1.11.1.10INTEGER {plain(0), login(1), cram-md5(2)}read-writecurrent
emailWarningSenderEmailAddr
OBJECT-TYPE
The sender email address of email warning function.
1.3.6.1.4.1.8691.7.69.1.11.1.11DisplayStringread-writecurrent
setDeviceIp
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.12
setDevIpTable
OBJECT-TYPE
The set devvice IP table.
1.3.6.1.4.1.8691.7.69.1.12.1not-accessiblecurrent
setDevIpEntry
OBJECT-TYPE
The set devvice IP table entry.
1.3.6.1.4.1.8691.7.69.1.12.1.1not-accessiblecurrent
setDevIpIndex
OBJECT-TYPE
The set devvice IP index.
1.3.6.1.4.1.8691.7.69.1.12.1.1.1INTEGERread-onlycurrent
setDevIpCurrentIpofDevice
OBJECT-TYPE
The current IP address of connected to this port.
1.3.6.1.4.1.8691.7.69.1.12.1.1.2DisplayStringread-onlycurrent
setDevIpPresentBy
OBJECT-TYPE
The protocol used that assigning IP to the device.
1.3.6.1.4.1.8691.7.69.1.12.1.1.3INTEGER {no(0), dhcpClient(1), rarp(2), bootp(4)}read-onlycurrent
setDevIpDedicatedIp
OBJECT-TYPE
The IP address when assign to the device connected to this port.
1.3.6.1.4.1.8691.7.69.1.12.1.1.4IpAddressread-writecurrent
mirroring
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.13
targetPort
OBJECT-TYPE
The mirrored port of mirroring function.
1.3.6.1.4.1.8691.7.69.1.13.1INTEGERread-writecurrent
mirroringPort
OBJECT-TYPE
The mirroring port of mirroring function.
1.3.6.1.4.1.8691.7.69.1.13.2INTEGERread-writecurrent
monitorDirection
OBJECT-TYPE
The traffic direction of mirroring function.
1.3.6.1.4.1.8691.7.69.1.13.3INTEGER {inputDataStream(0), outputDataStream(1), biDirectional(2)}read-writecurrent
portTrunking
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.14
trunkSettingTable
OBJECT-TYPE
Port Trunking Setting Table.
1.3.6.1.4.1.8691.7.69.1.14.1not-accessiblecurrent
trunkSettingEntry
OBJECT-TYPE
Port Trunking Setting Entry.
1.3.6.1.4.1.8691.7.69.1.14.1.1not-accessiblecurrent
trunkSettingIndex
OBJECT-TYPE
Trunking Group Index.
1.3.6.1.4.1.8691.7.69.1.14.1.1.1INTEGERread-onlycurrent
trunkType
OBJECT-TYPE
Trunking Group Type.
1.3.6.1.4.1.8691.7.69.1.14.1.1.2INTEGER {static(1), lacp(2)}read-writecurrent
trunkMemberPorts
OBJECT-TYPE
Trunking Group Member Ports.
1.3.6.1.4.1.8691.7.69.1.14.1.1.3PortListread-writecurrent
trunkTable
OBJECT-TYPE
Port Trunking Table.
1.3.6.1.4.1.8691.7.69.1.14.2not-accessiblecurrent
trunkEntry
OBJECT-TYPE
Port Trunking Entry.
1.3.6.1.4.1.8691.7.69.1.14.2.1not-accessiblecurrent
trunkIndex
OBJECT-TYPE
Trunking Group Index.
1.3.6.1.4.1.8691.7.69.1.14.2.1.1INTEGERread-onlycurrent
trunkPort
OBJECT-TYPE
Trunking Group Member Port.
1.3.6.1.4.1.8691.7.69.1.14.2.1.2INTEGERread-onlycurrent
trunkStatus
OBJECT-TYPE
Trunking Port Status.
1.3.6.1.4.1.8691.7.69.1.14.2.1.3INTEGER {success(1), fail(2), standby(3)}read-onlycurrent
commRedundancy
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.16
protocolOfRedundancySetup
OBJECT-TYPE
This set the redundancy protocol of this switch.
1.3.6.1.4.1.8691.7.69.1.16.1INTEGER {spanningTree(1), turboRing(2), turboRingV2(3), turboChain(4), mstp(5)}read-writecurrent
turboRing
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.16.2
turboRingMaster
OBJECT-TYPE
Is this a Master or Slave.
1.3.6.1.4.1.8691.7.69.1.16.2.1INTEGER {no(0), yes(1)}read-onlycurrent
turboRingMasterSetup
OBJECT-TYPE
Set this to be Master.
1.3.6.1.4.1.8691.7.69.1.16.2.2INTEGER {no(0), yes(1)}read-writecurrent
turboRingPortTable
OBJECT-TYPE
Turbo Ring Port Table.
1.3.6.1.4.1.8691.7.69.1.16.2.3not-accessiblecurrent
turboRingPortEntry
OBJECT-TYPE
Turbo Ring Port Entry.
1.3.6.1.4.1.8691.7.69.1.16.2.3.1not-accessiblecurrent
turboRingPortIndex
OBJECT-TYPE
Turbo Ring Port Index.
1.3.6.1.4.1.8691.7.69.1.16.2.3.1.1INTEGERread-onlycurrent
turboRingPortStatus
OBJECT-TYPE
Turbo Ring Port Status.
1.3.6.1.4.1.8691.7.69.1.16.2.3.1.2INTEGER {portDisabled(0), notTurboRingPort(1), linkDown(2), blocked(3), learning(4), forwarding(5)}read-onlycurrent
turboRingPortDesignatedBridge
OBJECT-TYPE
The MAC address of the bridge which this port considers to be the Designated Bridge for this port's segment.
1.3.6.1.4.1.8691.7.69.1.16.2.3.1.3MacAddressread-onlycurrent
turboRingPortDesignatedPort
OBJECT-TYPE
The Port Number of the port on the Designated Bridge for this port's segment.
1.3.6.1.4.1.8691.7.69.1.16.2.3.1.4INTEGERread-onlycurrent
turboRingDesignatedMaster
OBJECT-TYPE
The MAC address of the bridge which is the Master of the TURBO RING.
1.3.6.1.4.1.8691.7.69.1.16.2.6MacAddressread-onlycurrent
turboRingRdntPort1
OBJECT-TYPE
The port number of 1st Redundant Port on the TURBO RING.
1.3.6.1.4.1.8691.7.69.1.16.2.7INTEGERread-writecurrent
turboRingRdntPort2
OBJECT-TYPE
The port number of 2nd Redundant Port on the TURBO RING.
1.3.6.1.4.1.8691.7.69.1.16.2.8INTEGERread-writecurrent
turboRingEnableCoupling
OBJECT-TYPE
This enable the ring coupling function.
1.3.6.1.4.1.8691.7.69.1.16.2.9INTEGER {disable(0), enable(1)}read-writecurrent
turboRingCouplingPort
OBJECT-TYPE
The coupling port of ring coupling function.
1.3.6.1.4.1.8691.7.69.1.16.2.10INTEGERread-writecurrent
turboRingCouplingPortStatus
OBJECT-TYPE
The coupling port status of ring coupling function.
1.3.6.1.4.1.8691.7.69.1.16.2.11INTEGER {portDisabled(0), notCouplingPort(1), linkDown(2), blocked(3), forwarding(5)}read-onlycurrent
turboRingControlPort
OBJECT-TYPE
The control port of ring coupling function.
1.3.6.1.4.1.8691.7.69.1.16.2.12INTEGERread-writecurrent
turboRingControlPortStatus
OBJECT-TYPE
The control port status of ring coupling function.
1.3.6.1.4.1.8691.7.69.1.16.2.13INTEGER {portDisabled(0), notControlPort(1), linkDown(2), blocked(3), forwarding(5), inactive(6), active(7)}read-onlycurrent
turboRingBrokenStatus
OBJECT-TYPE
Turbo Ring broken display.
1.3.6.1.4.1.8691.7.69.1.16.2.14INTEGER {na(0), normal(1), broken(2)}read-onlycurrent
spanningTree
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.16.3
spanningTreeRoot
OBJECT-TYPE
The root of spanning tree.
1.3.6.1.4.1.8691.7.69.1.16.3.1INTEGER {no(0), yes(1)}read-onlycurrent
spanningTreeBridgePriority
OBJECT-TYPE
The bridge priority of spanning tree protocol.
1.3.6.1.4.1.8691.7.69.1.16.3.2INTEGER {priority0(0), priority4096(4096), priority8192(8192), priority12288(12288), priority16384(16384), priority20480(20480), priority24576(24576), priority28672(28672), priority32768(32768), priority36864(36864), priority40960(40960), priority45056(45056), priority49152(49152), priority53248(53248), priority57344(57344), priority61440(61440)}read-writecurrent
spanningTreeHelloTime
OBJECT-TYPE
The hello time of spanning tree protocol.
1.3.6.1.4.1.8691.7.69.1.16.3.3INTEGERread-writecurrent
spanningTreeMaxAge
OBJECT-TYPE
The max. age of spanning tree protocol.
1.3.6.1.4.1.8691.7.69.1.16.3.4INTEGERread-writecurrent
spanningTreeForwardingDelay
OBJECT-TYPE
Tje forwarding delay of spanning tree protocol.
1.3.6.1.4.1.8691.7.69.1.16.3.5INTEGERread-writecurrent
spanningTreeTable
OBJECT-TYPE
The spanning tree table.
1.3.6.1.4.1.8691.7.69.1.16.3.6not-accessiblecurrent
spanningTreeEntry
OBJECT-TYPE
The spanning tree port entry.
1.3.6.1.4.1.8691.7.69.1.16.3.6.1not-accessiblecurrent
spanningTreeIndex
OBJECT-TYPE
The index of spanning tree table.
1.3.6.1.4.1.8691.7.69.1.16.3.6.1.1INTEGERread-onlycurrent
enableSpanningTree
OBJECT-TYPE
This enable of spanning tree protocol for this port.
1.3.6.1.4.1.8691.7.69.1.16.3.6.1.2INTEGER {disable(0), enable(1)}read-writecurrent
spanningTreePortPriority
OBJECT-TYPE
The port priority of spanning tree protocol.
1.3.6.1.4.1.8691.7.69.1.16.3.6.1.3INTEGER {priority0(0), priority16(16), priority32(32), priority48(48), priority64(64), priority80(80), priority96(96), priority112(112), priority128(128), priority144(144), priority160(160), priority176(176), priority192(192), priority208(208), priority224(224), priority240(240)}read-writecurrent
spanningTreePortCost
OBJECT-TYPE
The port cost of spanning tree protocol.
1.3.6.1.4.1.8691.7.69.1.16.3.6.1.4INTEGERread-writecurrent
spanningTreePortStatus
OBJECT-TYPE
The port status of spanning tree protocol.
1.3.6.1.4.1.8691.7.69.1.16.3.6.1.5INTEGER {portDisabled(0), notSpanningTreePort(1), linkDown(2), blocked(3), learning(4), forwarding(5)}read-onlycurrent
spanningTreePortEdge
OBJECT-TYPE
This configures the Edge Port property for this port.
1.3.6.1.4.1.8691.7.69.1.16.3.6.1.6INTEGER {auto(0), true(1), false(2)}read-writecurrent
activeProtocolOfRedundancy
OBJECT-TYPE
This shows the active redundancy protocol of this switch now. The none(0) stauts will be showed if only if the switch's redundancy protocol is set to spanning tree and none of ports enable spanning tree.
1.3.6.1.4.1.8691.7.69.1.16.4INTEGER {none(0), spanningTree(1), turboRing(2), turboRingV2(3), turboChain(4), mstp(5)}read-onlycurrent
turboRingV2
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.16.5
turboRingV2Ring1
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.16.5.1
ringIndexRing1
OBJECT-TYPE
The turboRingV2 Ring Index.
1.3.6.1.4.1.8691.7.69.1.16.5.1.1INTEGER (1..2)read-onlycurrent
ringEnableRing1
OBJECT-TYPE
The turboRingV2 Ring1 Enalbe Config.
1.3.6.1.4.1.8691.7.69.1.16.5.1.2INTEGER {disable(0), enable(1)}read-writecurrent
masterSetupRing1
OBJECT-TYPE
Is this a Master or Slave.
1.3.6.1.4.1.8691.7.69.1.16.5.1.3INTEGER {no(0), yes(1)}read-writecurrent
masterStatusRing1
OBJECT-TYPE
Set this to be Master.
1.3.6.1.4.1.8691.7.69.1.16.5.1.4INTEGER {no(0), yes(1)}read-onlycurrent
designatedMasterRing1
OBJECT-TYPE
The MAC address of the bridge which is the Master of the turboRingV2.
1.3.6.1.4.1.8691.7.69.1.16.5.1.5MacAddressread-onlycurrent
rdnt1stPortRing1
OBJECT-TYPE
The port number of 1st Redundant Port on the turboRingV2.
1.3.6.1.4.1.8691.7.69.1.16.5.1.6INTEGERread-writecurrent
rdnt1stPortStatusRing1
OBJECT-TYPE
The status of 1st Redundant Port on the turboRingV2.
1.3.6.1.4.1.8691.7.69.1.16.5.1.7INTEGER {disabled(0), notRedundant(1), linkdown(2), blocking(3), learning(4), forwarding(5)}read-onlycurrent
rdnt2ndPortRing1
OBJECT-TYPE
The port number of 2nd Redundant Port on the turboRingV2.
1.3.6.1.4.1.8691.7.69.1.16.5.1.8INTEGERread-writecurrent
rdnt2ndPortStatusRing1
OBJECT-TYPE
The status of 2nd Redundant Port on the turboRingV2.
1.3.6.1.4.1.8691.7.69.1.16.5.1.9INTEGER {disabled(0), notRedundant(1), linkdown(2), blocking(3), learning(4), forwarding(5)}read-onlycurrent
brokenStatusRing1
OBJECT-TYPE
turboRingV2 broken display.
1.3.6.1.4.1.8691.7.69.1.16.5.1.10INTEGER {na(0), normal(1), broken(2)}read-onlycurrent
turboRingV2Ring2
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.16.5.2
ringIndexRing2
OBJECT-TYPE
The turboRingV2 Ring Index.
1.3.6.1.4.1.8691.7.69.1.16.5.2.1INTEGER (1..2)read-onlycurrent
ringEnableRing2
OBJECT-TYPE
The turboRingV2 Ring2 Enalbe Config.
1.3.6.1.4.1.8691.7.69.1.16.5.2.2INTEGER {disable(0), enable(1)}read-writecurrent
masterSetupRing2
OBJECT-TYPE
Is this a Master or Slave.
1.3.6.1.4.1.8691.7.69.1.16.5.2.3INTEGER {no(0), yes(1)}read-writecurrent
masterStatusRing2
OBJECT-TYPE
Set this to be Master.
1.3.6.1.4.1.8691.7.69.1.16.5.2.4INTEGER {no(0), yes(1)}read-onlycurrent
designatedMasterRing2
OBJECT-TYPE
The MAC address of the bridge which is the Master of the turboRingV2.
1.3.6.1.4.1.8691.7.69.1.16.5.2.5MacAddressread-onlycurrent
rdnt1stPortRing2
OBJECT-TYPE
The port number of 1st Redundant Port on the turboRingV2.
1.3.6.1.4.1.8691.7.69.1.16.5.2.6INTEGERread-writecurrent
rdnt1stPortStatusRing2
OBJECT-TYPE
The status of 1st Redundant Port on the turboRingV2.
1.3.6.1.4.1.8691.7.69.1.16.5.2.7INTEGER {disabled(0), notRedundant(1), linkdown(2), blocking(3), learning(4), forwarding(5)}read-onlycurrent
rdnt2ndPortRing2
OBJECT-TYPE
The port number of 2nd Redundant Port on the turboRingV2.
1.3.6.1.4.1.8691.7.69.1.16.5.2.8INTEGERread-writecurrent
rdnt2ndPortStatusRing2
OBJECT-TYPE
The status of 2nd Redundant Port on the turboRingV2.
1.3.6.1.4.1.8691.7.69.1.16.5.2.9INTEGER {disabled(0), notRedundant(1), linkdown(2), blocking(3), learning(4), forwarding(5)}read-onlycurrent
brokenStatusRing2
OBJECT-TYPE
turboRingV2 broken display.
1.3.6.1.4.1.8691.7.69.1.16.5.2.10INTEGER {na(0), normal(1), broken(2)}read-onlycurrent
turboRingV2Coupling
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.16.5.3
couplingEnable
OBJECT-TYPE
Setting the ring coupling enable.
1.3.6.1.4.1.8691.7.69.1.16.5.3.1INTEGER {disable(0), enable(1)}read-writecurrent
couplingMode
OBJECT-TYPE
Setting the ring coupling mode.
1.3.6.1.4.1.8691.7.69.1.16.5.3.2INTEGER {dualHoming(1), couplingBackup(2), couplingPrimary(3)}read-writecurrent
coupling1stPort
OBJECT-TYPE
If in 'DUAL HOMING' mode,port name is 'Primary port',If in 'COUPLING' mode,port name is 'Coupling port'
1.3.6.1.4.1.8691.7.69.1.16.5.3.3INTEGERread-writecurrent
coupling1stPortStatus
OBJECT-TYPE
The 1st coupling port status of coupling function.
1.3.6.1.4.1.8691.7.69.1.16.5.3.4INTEGER {disabled(0), notRedundant(1), linkdown(2), blocking(3), learning(4), forwarding(5)}read-onlycurrent
coupling2ndPort
OBJECT-TYPE
If in 'DUAL HOMING' mode,port name is 'Backup port',If in 'COUPLING' mode,port name is no used.
1.3.6.1.4.1.8691.7.69.1.16.5.3.5INTEGERread-writecurrent
coupling2ndPortStatus
OBJECT-TYPE
The 2nd coupling port status of coupling function.
1.3.6.1.4.1.8691.7.69.1.16.5.3.6INTEGER {disabled(0), notRedundant(1), linkdown(2), blocking(3), learning(4), forwarding(5)}read-onlycurrent
turboChain
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.16.6
turboChainRole
OBJECT-TYPE
The Role of TURBO CHAIN.
1.3.6.1.4.1.8691.7.69.1.16.6.1INTEGER {head(1), member(2), tail(3)}read-writecurrent
turboChainPort1
OBJECT-TYPE
The port number of 1st Redundant Port on the TURBO CHAIN. If switch role is Turbo Chain Head, this is Head port, If Switch role is Turbo Chain Tail, this is Tail port.
1.3.6.1.4.1.8691.7.69.1.16.6.2INTEGERread-writecurrent
turboChainPort2
OBJECT-TYPE
The port number of 2nd Redundant Port on the TURBO CHAIN. It is the member port of TurboChain
1.3.6.1.4.1.8691.7.69.1.16.6.3INTEGERread-writecurrent
turboChainPort1Status
OBJECT-TYPE
Turbo Chain Port Status.
1.3.6.1.4.1.8691.7.69.1.16.6.4INTEGER {notTurboChainPort(0), linkDown(1), blocking(2), blocked(3), forwarding(4), na(5)}read-onlycurrent
turboChainPort2Status
OBJECT-TYPE
Turbo Chain Port Status.
1.3.6.1.4.1.8691.7.69.1.16.6.5INTEGER {notTurboChainPort(0), linkDown(1), blocking(2), blocked(3), forwarding(4), na(5)}read-onlycurrent
turboChainPort1PartnerBridge
OBJECT-TYPE
The MAC address of the next bridge
1.3.6.1.4.1.8691.7.69.1.16.6.6MacAddressread-onlycurrent
turboChainPort2PartnerBridge
OBJECT-TYPE
The MAC address of the neighbor Turbo Chain switch
1.3.6.1.4.1.8691.7.69.1.16.6.7MacAddressread-onlycurrent
relayWarning
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.17
relayWarningTable
OBJECT-TYPE
The relay warning table.
1.3.6.1.4.1.8691.7.69.1.17.11not-accessiblecurrent
relayWarningEntry
OBJECT-TYPE
Relay Warning Entry.
1.3.6.1.4.1.8691.7.69.1.17.11.1not-accessiblecurrent
relayAlarmIndex
OBJECT-TYPE
The Relay alarm index.
1.3.6.1.4.1.8691.7.69.1.17.11.1.1INTEGERread-onlycurrent
relayWarningRelayContact
OBJECT-TYPE
The first Relay contact status.
1.3.6.1.4.1.8691.7.69.1.17.11.1.2INTEGER {closed(0), opened(1)}read-onlycurrent
overrideRelayWarningSetting
OBJECT-TYPE
Override the relay warning setting.
1.3.6.1.4.1.8691.7.69.1.17.11.1.3INTEGER {no(0), yes(1)}read-writecurrent
relayWarningPower1Off
OBJECT-TYPE
The relay contact will be opened while the first power input off.
1.3.6.1.4.1.8691.7.69.1.17.11.1.4INTEGER {disable(0), enable(1)}read-writecurrent
relayWarningPower1OffStatus
OBJECT-TYPE
The relay contact is opened as the first power input off..
1.3.6.1.4.1.8691.7.69.1.17.11.1.5INTEGER {not-triggered(0), triggered(1)}read-onlycurrent
relayWarningPower2Off
OBJECT-TYPE
The relay contact will be opened while the second power input off.
1.3.6.1.4.1.8691.7.69.1.17.11.1.6INTEGER {disable(0), enable(1)}read-writecurrent
relayWarningPower2OffStatus
OBJECT-TYPE
The relay contact is opened as the second power input off.
1.3.6.1.4.1.8691.7.69.1.17.11.1.7INTEGER {not-triggered(0), triggered(1)}read-onlycurrent
relayWarningTurboRingBreak
OBJECT-TYPE
The relay contact will be opened while turbo ring break.
1.3.6.1.4.1.8691.7.69.1.17.11.1.8INTEGER {disable(0), enable(1)}read-writecurrent
relayWarningTurboRingBreakStatus
OBJECT-TYPE
The relay contact is opened while turbo ring is broken.
1.3.6.1.4.1.8691.7.69.1.17.11.1.9INTEGER {not-triggered(0), triggered(1)}read-onlycurrent
portRelayWarningTable
OBJECT-TYPE
The relay warning port table.
1.3.6.1.4.1.8691.7.69.1.17.12not-accessiblecurrent
portRelayWarningEntry
OBJECT-TYPE
Port Relay Warning Entry.
1.3.6.1.4.1.8691.7.69.1.17.12.1not-accessiblecurrent
relayWarningLinkChanged
OBJECT-TYPE
The relay contact will be opened while this port's link status is changed.
1.3.6.1.4.1.8691.7.69.1.17.12.1.1INTEGER {ignore(0), on2off(1), off2on(2)}read-writecurrent
relayWarningLinkChangedStatus
OBJECT-TYPE
The relay contact is opened as this port's link status is changed.
1.3.6.1.4.1.8691.7.69.1.17.12.1.2INTEGER {not-triggered(0), triggered(1)}read-onlycurrent
relayWarningTrafficOverload
OBJECT-TYPE
The relay contact will be opened while this port's traffic is overload.
1.3.6.1.4.1.8691.7.69.1.17.12.1.3INTEGER {disable(0), enable(1)}read-writecurrent
relayWarningTrafficOverloadStatus
OBJECT-TYPE
The relay contact is opened as this port's traffic is overload.
1.3.6.1.4.1.8691.7.69.1.17.12.1.4INTEGER {not-triggered(0), triggered(1)}read-onlycurrent
relayWarningRxTrafficThreshold
OBJECT-TYPE
The threshold of the port traffic will be over loading.
1.3.6.1.4.1.8691.7.69.1.17.12.1.5INTEGERread-writecurrent
relayWarningTrafficDuration
OBJECT-TYPE
The duration of the port traffic will be over loading.
1.3.6.1.4.1.8691.7.69.1.17.12.1.6INTEGERread-writecurrent
diRelayWarningTable
OBJECT-TYPE
The relay warning DI table.
1.3.6.1.4.1.8691.7.69.1.17.13not-accessiblecurrent
diRelayWarningEntry
OBJECT-TYPE
DI Relay Warning Entry.
1.3.6.1.4.1.8691.7.69.1.17.13.1not-accessiblecurrent
relayWarningDiInputChanged
OBJECT-TYPE
The relay contact will be opened while the DI input changed.
1.3.6.1.4.1.8691.7.69.1.17.13.1.1INTEGER {disable(0), off(1), on(2)}read-writecurrent
relayWarningDiInputChangedStatus
OBJECT-TYPE
The relay contact is opened as the first DI input changed..
1.3.6.1.4.1.8691.7.69.1.17.13.1.2INTEGER {not-triggered(0), triggered(1)}read-onlycurrent
trafficPrioritization
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.18
qosClassification
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.18.1
schedulingMechanism
OBJECT-TYPE
The scheduling mechanism.
1.3.6.1.4.1.8691.7.69.1.18.1.1INTEGER {schedweightfair(0), schedstrict(1)}read-writecurrent
qosPortTable
OBJECT-TYPE
The QoS port table.
1.3.6.1.4.1.8691.7.69.1.18.1.2not-accessiblecurrent
qosPortEntry
OBJECT-TYPE
The QoS Port Entry.
1.3.6.1.4.1.8691.7.69.1.18.1.2.1not-accessiblecurrent
dscpInspection
OBJECT-TYPE
This enable the inspection of dscp field.
1.3.6.1.4.1.8691.7.69.1.18.1.2.1.1INTEGER {no(0), yes(1)}read-writecurrent
cosInspection
OBJECT-TYPE
This enable the inspection of CoS field.
1.3.6.1.4.1.8691.7.69.1.18.1.2.1.2INTEGER {no(0), yes(1)}read-writecurrent
portPriority
OBJECT-TYPE
The deault priority of the port.
1.3.6.1.4.1.8691.7.69.1.18.1.2.1.3INTEGER {priority0(0), priority1(1), priority2(2), priority3(3), priority4(4), priority5(5), priority6(6), priority7(7)}read-writecurrent
priorityMapping
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.18.2
priorityMappingTable
OBJECT-TYPE
The priority mapping table.
1.3.6.1.4.1.8691.7.69.1.18.2.1not-accessiblecurrent
priorityMappingEntry
OBJECT-TYPE
The Priority mapping Entry.
1.3.6.1.4.1.8691.7.69.1.18.2.1.1not-accessiblecurrent
priorityTag
OBJECT-TYPE
The priority tag of QOS field.
1.3.6.1.4.1.8691.7.69.1.18.2.1.1.1INTEGER (0..7)read-onlycurrent
priorityMappedQueue
OBJECT-TYPE
The egress queue corresponding to it's priority value.
1.3.6.1.4.1.8691.7.69.1.18.2.1.1.2INTEGER {trafficclass0(0), trafficclass1(1), trafficclass2(2), trafficclass3(3)}read-writecurrent
dscpMapping
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.18.3
dscpMappingTable
OBJECT-TYPE
The DSCP mapping table.
1.3.6.1.4.1.8691.7.69.1.18.3.1not-accessiblecurrent
dscpMappingEntry
OBJECT-TYPE
DSCP mapping Entry.
1.3.6.1.4.1.8691.7.69.1.18.3.1.1not-accessiblecurrent
dscpClass
OBJECT-TYPE
The DSCP class of TOS field.
1.3.6.1.4.1.8691.7.69.1.18.3.1.1.1INTEGERread-onlycurrent
dscpMappedPriority
OBJECT-TYPE
The frame's priority corresponding to it's DSCP class value.
1.3.6.1.4.1.8691.7.69.1.18.3.1.1.2INTEGER {priority0(0), priority1(1), priority2(2), priority3(3), priority4(4), priority5(5), priority6(6), priority7(7)}read-writecurrent
vlan
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.19
vlanPortSettingTable
OBJECT-TYPE
The vlan seting table of ports.
1.3.6.1.4.1.8691.7.69.1.19.1not-accessiblecurrent
vlanPortSettingEntry
OBJECT-TYPE
Port Setting Entry of VLAN.
1.3.6.1.4.1.8691.7.69.1.19.1.1not-accessiblecurrent
portVlanType
OBJECT-TYPE
The vlan type of port.
1.3.6.1.4.1.8691.7.69.1.19.1.1.1INTEGER {access(0), trunk(1), hybrid(2)}read-writecurrent
portDefaultVid
OBJECT-TYPE
The PVID of port.
1.3.6.1.4.1.8691.7.69.1.19.1.1.2INTEGER (1..4094)read-writecurrent
portFixedVid
OBJECT-TYPE
The fixed vids of (trunk) port.
1.3.6.1.4.1.8691.7.69.1.19.1.1.3DisplayStringread-writecurrent
portForbiddenVid
OBJECT-TYPE
The forbidden vids of (trunk)port.
1.3.6.1.4.1.8691.7.69.1.19.1.1.4DisplayStringread-writecurrent
portFixedVidUntag
OBJECT-TYPE
The fixed untag vids of (trunk) port.
1.3.6.1.4.1.8691.7.69.1.19.1.1.5DisplayStringread-writecurrent
vlanTable
OBJECT-TYPE
The VLAN table.
1.3.6.1.4.1.8691.7.69.1.19.2not-accessiblecurrent
vlanEntry
OBJECT-TYPE
VLAN Entry.
1.3.6.1.4.1.8691.7.69.1.19.2.1not-accessiblecurrent
vlanId
OBJECT-TYPE
The VLAN id.
1.3.6.1.4.1.8691.7.69.1.19.2.1.1INTEGER (1..4094)read-onlycurrent
joinedAccessPorts
OBJECT-TYPE
The access ports that joined this VID.
1.3.6.1.4.1.8691.7.69.1.19.2.1.2PortListread-onlycurrent
joinedTrunkPorts
OBJECT-TYPE
The trunk ports that joined this VID.
1.3.6.1.4.1.8691.7.69.1.19.2.1.3PortListread-onlycurrent
joinedHybridPorts
OBJECT-TYPE
The hybrid ports that joined this VID.
1.3.6.1.4.1.8691.7.69.1.19.2.1.4PortListread-onlycurrent
vlanName
OBJECT-TYPE
The VLAN name.
1.3.6.1.4.1.8691.7.69.1.19.2.1.5DisplayStringread-writecurrent
managementVlanId
OBJECT-TYPE
The management VLAN id.
1.3.6.1.4.1.8691.7.69.1.19.3INTEGERread-writecurrent
vlanType
OBJECT-TYPE
VLAN Type.
1.3.6.1.4.1.8691.7.69.1.19.4INTEGER {tagBased(0), portBased(1)}read-writecurrent
portbaseVlanSettingTable
OBJECT-TYPE
Port base Vlan Setting Table.
1.3.6.1.4.1.8691.7.69.1.19.5not-accessiblecurrent
portbaseVlanSettingEntry
OBJECT-TYPE
Port base Vlan Setting Entry.
1.3.6.1.4.1.8691.7.69.1.19.5.1not-accessiblecurrent
portbaseVlanSettingIndex
OBJECT-TYPE
port base Vlan Group Index.
1.3.6.1.4.1.8691.7.69.1.19.5.1.1INTEGERread-onlycurrent
portbaseVlanMemberPorts
OBJECT-TYPE
port base Vlan Group Member Ports.
1.3.6.1.4.1.8691.7.69.1.19.5.1.2PortListread-writecurrent
enableGvrp
OBJECT-TYPE
Enable GVRP.
1.3.6.1.4.1.8691.7.69.1.19.6INTEGER {disable(0), enable(1)}read-writecurrent
multicastFiltering
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.20
igmpSnooping
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.20.1
querierQueryInterval
OBJECT-TYPE
This query interval of the querier function for this VLAN.
1.3.6.1.4.1.8691.7.69.1.20.1.1INTEGER (20..600)read-writecurrent
igmpSnoopingSettingTable
OBJECT-TYPE
The IGMP snooping setting table.
1.3.6.1.4.1.8691.7.69.1.20.1.2not-accessiblecurrent
igmpSnoopingSettingEntry
OBJECT-TYPE
The IGMP snooping setting Entry.
1.3.6.1.4.1.8691.7.69.1.20.1.2.1not-accessiblecurrent
enableIgmpSnooping
OBJECT-TYPE
This enable the IGMP snooping functon in this VLAN.
1.3.6.1.4.1.8691.7.69.1.20.1.2.1.1INTEGER {disable(0), enable(1)}read-writecurrent
enableQuerier
OBJECT-TYPE
This enable the querier function for this VLAN.
1.3.6.1.4.1.8691.7.69.1.20.1.2.1.2INTEGER {disable(0), igmpv2(1), igmpv3(2)}read-writecurrent
fixedMulticastQuerierPorts
OBJECT-TYPE
The ports that multicast-Querier exist.
1.3.6.1.4.1.8691.7.69.1.20.1.2.1.3PortListread-writecurrent
learnedMulticastQuerierPorts
OBJECT-TYPE
The ports that multicast-Querier exist.
1.3.6.1.4.1.8691.7.69.1.20.1.2.1.4PortListread-onlycurrent
enableGlobalIgmpSnooping
OBJECT-TYPE
This enable the IGMP snooping functon .
1.3.6.1.4.1.8691.7.69.1.20.1.4INTEGER {disable(0), enable(1)}read-writecurrent
multicastFastForwarding
OBJECT-TYPE
This Enable Multicast Fast Forwarding Mode functon .
1.3.6.1.4.1.8691.7.69.1.20.1.7INTEGER {disable(0), enable(1)}read-writecurrent
staticMulticast
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.20.2
staticMulticastTable
OBJECT-TYPE
The static multicast table.
1.3.6.1.4.1.8691.7.69.1.20.2.1not-accessiblecurrent
staticMulticastEntry
OBJECT-TYPE
Static multicast Entry.
1.3.6.1.4.1.8691.7.69.1.20.2.1.1not-accessiblecurrent
staticMulticastAddress
OBJECT-TYPE
The static multicast address.
1.3.6.1.4.1.8691.7.69.1.20.2.1.1.1MacAddressread-createcurrent
staticMulticastPorts
OBJECT-TYPE
The port map of the static multicast address.
1.3.6.1.4.1.8691.7.69.1.20.2.1.1.2PortListread-createcurrent
staticMulticastStatus
OBJECT-TYPE
The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then actvie. Use destroy to delete this row.
1.3.6.1.4.1.8691.7.69.1.20.2.1.1.3INTEGER {active(1), createAndGo(4), createAndWait(5), destroy(6)}read-createcurrent
gmrp
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.20.3
gmrpSettingTable
OBJECT-TYPE
The GMRP setting table.
1.3.6.1.4.1.8691.7.69.1.20.3.1not-accessiblecurrent
gmrpSettingEntry
OBJECT-TYPE
The GMRP Setting Entry.
1.3.6.1.4.1.8691.7.69.1.20.3.1.1not-accessiblecurrent
enableGMRP
OBJECT-TYPE
Enable/Disable GMRP.
1.3.6.1.4.1.8691.7.69.1.20.3.1.1.1INTEGER {disable(0), enable(1)}read-writecurrent
gmrpTable
OBJECT-TYPE
The GMRP status table.
1.3.6.1.4.1.8691.7.69.1.20.3.2not-accessiblecurrent
gmrpEntry
OBJECT-TYPE
The GMRP Status Entry.
1.3.6.1.4.1.8691.7.69.1.20.3.2.1not-accessiblecurrent
gmrpMulticastGroup
OBJECT-TYPE
GMRP multicast group.
1.3.6.1.4.1.8691.7.69.1.20.3.2.1.1MacAddressread-onlycurrent
gmrpFixedPorts
OBJECT-TYPE
The ports that joined GMRP multicast group manually.
1.3.6.1.4.1.8691.7.69.1.20.3.2.1.2PortListread-onlycurrent
gmrpLearnedPorts
OBJECT-TYPE
The ports that joined GMRP multicast group by GMRP learning.
1.3.6.1.4.1.8691.7.69.1.20.3.2.1.3PortListread-onlycurrent
rateLimiting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.21
droppacketModeRateLimitingIngressTable
OBJECT-TYPE
The rate limiting table.
1.3.6.1.4.1.8691.7.69.1.21.1not-accessiblecurrent
droppacketModeRateLimitingIngressEntry
OBJECT-TYPE
Rate limiting Entry.
1.3.6.1.4.1.8691.7.69.1.21.1.1not-accessiblecurrent
ingressLimitRate
OBJECT-TYPE
The ingress limit mode.
1.3.6.1.4.1.8691.7.69.1.21.1.1.1INTEGER {notlimited(0), percentage03(1), percentage05(2), percentage10(3), percentage15(4), percentage25(5), percentage35(6), percentage50(7), percentage65(8), percentage85(9)}read-writecurrent
broadcastStormProtection
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.21.2
bcastStormProtection
OBJECT-TYPE
Broadcast Storm Protection
1.3.6.1.4.1.8691.7.69.1.21.2.1INTEGER {disable(0), enable(1)}read-writecurrent
bcastStormProtectionIncludeMcast
OBJECT-TYPE
Broadcast Storm Protection includes Multicast packets
1.3.6.1.4.1.8691.7.69.1.21.2.2INTEGER {no(0), yes(1)}read-writecurrent
bcastStormProtectionIncludeUcast
OBJECT-TYPE
Broadcast Storm Protection includes Unicast packets
1.3.6.1.4.1.8691.7.69.1.21.2.3INTEGER {no(0), yes(1)}read-writecurrent
portDisableMode
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.21.3
portDisableModePeriod
OBJECT-TYPE
Check time.
1.3.6.1.4.1.8691.7.69.1.21.3.1INTEGER (1..65535)read-writecurrent
portDisableModeTable
OBJECT-TYPE
The rate limiting table.
1.3.6.1.4.1.8691.7.69.1.21.3.2not-accessiblecurrent
portDisableModeEntry
OBJECT-TYPE
Rate limiting Entry.
1.3.6.1.4.1.8691.7.69.1.21.3.2.1not-accessiblecurrent
ingressLimit
OBJECT-TYPE
The ingress limit mode.
1.3.6.1.4.1.8691.7.69.1.21.3.2.1.1INTEGER {notlimited(0), rateMega1Fps4464(1), rateMega2Fps7441(2), rateMega3Fps14881(3), rateMega4Fps22322(4), rateMega5Fps37203(5), rateMega6Fps52084(6), rateMega7Fps74405(7), rateGiga1Fps44640(8), rateGiga2Fps74410(9), rateGiga3Fps148810(10), rateGiga4Fps223220(11), rateGiga5Fps372030(12), rateGiga6Fps520840(13), rateGiga7Fps744050(14)}read-writecurrent
rateLimitingAction
OBJECT-TYPE
The rate limiting mode.
1.3.6.1.4.1.8691.7.69.1.21.4INTEGER {droppacket(0), portDisable(1)}read-writecurrent
security
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.22
userLoginSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.22.1
userLoginServer
OBJECT-TYPE
Set user login server option.
1.3.6.1.4.1.8691.7.69.1.22.1.1INTEGER {tacacsLocal(1), radiusLocal(2), tacacs(3), radius(4), local(5)}read-writecurrent
tacacsServerSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.22.1.2
tacacsLoginAuthServer
OBJECT-TYPE
Set Tacacs+ Server IP Address/Domain name.
1.3.6.1.4.1.8691.7.69.1.22.1.2.1DisplayStringread-writecurrent
tacacsLoginAuthPort
OBJECT-TYPE
Set Tacacs+ Port.
1.3.6.1.4.1.8691.7.69.1.22.1.2.2INTEGER (1..65535)read-writecurrent
tacacsLoginAuthSharedKey
OBJECT-TYPE
Set Tacacs+ Shared Key.
1.3.6.1.4.1.8691.7.69.1.22.1.2.3DisplayStringread-writecurrent
tacacsLoginAuthAuthType
OBJECT-TYPE
Set Tacacs+ Shared Key.
1.3.6.1.4.1.8691.7.69.1.22.1.2.4INTEGER {ascii(0), pap(1), chap(2), mschap(4)}read-writecurrent
tacacsLoginAuthTimeout
OBJECT-TYPE
Set Tacacs+ Shared Key.
1.3.6.1.4.1.8691.7.69.1.22.1.2.5INTEGER (1..255)read-writecurrent
radiusServerSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.22.1.3
radiusLoginAuthServer
OBJECT-TYPE
Set Radius Server IP Address/Domain name.
1.3.6.1.4.1.8691.7.69.1.22.1.3.1DisplayStringread-writecurrent
radiusLoginAuthPort
OBJECT-TYPE
Set Radius Port.
1.3.6.1.4.1.8691.7.69.1.22.1.3.2INTEGER (1..65535)read-writecurrent
radiusLoginAuthSharedKey
OBJECT-TYPE
Set Radius Shared Key.
1.3.6.1.4.1.8691.7.69.1.22.1.3.3DisplayStringread-writecurrent
radiusLoginAuthAuthType
OBJECT-TYPE
Set Radius Shared Key.
1.3.6.1.4.1.8691.7.69.1.22.1.3.4INTEGER {pap(0), chap(1)}read-writecurrent
radiusLoginAuthTimeout
OBJECT-TYPE
Set Radius Shared Key.
1.3.6.1.4.1.8691.7.69.1.22.1.3.5INTEGER (1..255)read-writecurrent
portAccessControl
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.22.2
staticPortLockLegacy
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.22.2.1
staticPortLockLegacyAddress
OBJECT-TYPE
The static port lock address.
1.3.6.1.4.1.8691.7.69.1.22.2.1.1MacAddressread-createcurrent
staticPortLockLegacyPort
OBJECT-TYPE
The port of the static port lock address.
1.3.6.1.4.1.8691.7.69.1.22.2.1.2INTEGERread-createcurrent
staticPortLockLegacyStatus
OBJECT-TYPE
The status is active to indicate normal. Use createAndGo to create new on multiple SET.
1.3.6.1.4.1.8691.7.69.1.22.2.1.3INTEGER {active(1), createAndGo(4)}read-createcurrent
dot1x
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.22.2.2
dataBaseOption
OBJECT-TYPE
Set IEEE 802.1X database option.
1.3.6.1.4.1.8691.7.69.1.22.2.2.1INTEGER {local(1), radius(2), radiuslocal(3)}read-writecurrent
dot1xReauthEnable
OBJECT-TYPE
Enable/Disable IEEE 802.1X Re-authentication.
1.3.6.1.4.1.8691.7.69.1.22.2.2.5INTEGER {disable(0), enable(1)}read-writecurrent
dot1xReauthPeriod
OBJECT-TYPE
Set IEEE 802.1X Re-authentication Period.
1.3.6.1.4.1.8691.7.69.1.22.2.2.6INTEGER (60..3600)read-writecurrent
dot1xSettingTable
OBJECT-TYPE
IEEE 802.1X Port Setting Table.
1.3.6.1.4.1.8691.7.69.1.22.2.2.7not-accessiblecurrent
dot1xSettingEntry
OBJECT-TYPE
IEEE 802.1X Port Setting Entry.
1.3.6.1.4.1.8691.7.69.1.22.2.2.7.1not-accessiblecurrent
enableDot1X
OBJECT-TYPE
Enable/Disable IEEE 802.1X.
1.3.6.1.4.1.8691.7.69.1.22.2.2.7.1.1INTEGER {disable(0), enable(1)}read-writecurrent
dot1xReauthTable
OBJECT-TYPE
IEEE 802.1X Re-authentication Table.
1.3.6.1.4.1.8691.7.69.1.22.2.2.8not-accessiblecurrent
dot1xReauthEntry
OBJECT-TYPE
IEEE 802.1X Re-authentication Entry.
1.3.6.1.4.1.8691.7.69.1.22.2.2.8.1not-accessiblecurrent
dot1xReauthPortIndex
OBJECT-TYPE
IEEE 802.1X Enabled Port Index.
1.3.6.1.4.1.8691.7.69.1.22.2.2.8.1.1INTEGERread-onlycurrent
dot1xReauth
OBJECT-TYPE
Reauth IEEE 802.1X.
1.3.6.1.4.1.8691.7.69.1.22.2.2.8.1.2INTEGER {no(0), yes(1)}read-writecurrent
dot1xRadius
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.22.2.2.9
dot1xSameAsAuthServer
OBJECT-TYPE
Set Radius Server IP Address/Domain name.
1.3.6.1.4.1.8691.7.69.1.22.2.2.9.1INTEGER {notSame(0), same(1)}read-writecurrent
dot1x1stRadiusServer
OBJECT-TYPE
Set Radius Server IP Address/Domain name.
1.3.6.1.4.1.8691.7.69.1.22.2.2.9.2DisplayStringread-writecurrent
dot1x1stRadiusPort
OBJECT-TYPE
Set Radius Port.
1.3.6.1.4.1.8691.7.69.1.22.2.2.9.3INTEGER (1..65535)read-writecurrent
dot1x1stRadiusSharedKey
OBJECT-TYPE
Set Radius Shared Key.
1.3.6.1.4.1.8691.7.69.1.22.2.2.9.4DisplayStringread-writecurrent
dot1x2ndRadiusServer
OBJECT-TYPE
Set Radius Server IP Address/Domain name.
1.3.6.1.4.1.8691.7.69.1.22.2.2.9.5DisplayStringread-writecurrent
dot1x2ndRadiusPort
OBJECT-TYPE
Set Radius Port.
1.3.6.1.4.1.8691.7.69.1.22.2.2.9.6INTEGER (1..65535)read-writecurrent
dot1x2ndRadiusSharedKey
OBJECT-TYPE
Set Radius Shared Key.
1.3.6.1.4.1.8691.7.69.1.22.2.2.9.7DisplayStringread-writecurrent
portAccessControlTable
OBJECT-TYPE
The Port Access Control table.
1.3.6.1.4.1.8691.7.69.1.22.2.3not-accessiblecurrent
portAccessControlEntry
OBJECT-TYPE
The Port Access Control table entry.
1.3.6.1.4.1.8691.7.69.1.22.2.3.1not-accessiblecurrent
portAccessControlAddress
OBJECT-TYPE
The MAC address which is static locked or IEEE 802.1X authorized.
1.3.6.1.4.1.8691.7.69.1.22.2.3.1.1MacAddressread-onlycurrent
portAccessControlPortNo
OBJECT-TYPE
The port number that the Port Access Control address resides.
1.3.6.1.4.1.8691.7.69.1.22.2.3.1.2INTEGERread-onlycurrent
portAccessControlAccessStatus
OBJECT-TYPE
The access status of the Port Access Control address.
1.3.6.1.4.1.8691.7.69.1.22.2.3.1.3INTEGER {staticLock(1), authorized(2), unAuthorized(3), authorizing(4), macAddrSticky(5)}read-onlycurrent
portAccessControlStatus
OBJECT-TYPE
The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then actvie. Use destroy to delete this row.
1.3.6.1.4.1.8691.7.69.1.22.2.3.1.4INTEGER {active(1), createAndGo(4), createAndWait(5), destroy(6)}read-createcurrent
portAccessControlVid
OBJECT-TYPE
The vid number that the Port Access Control address resides.
1.3.6.1.4.1.8691.7.69.1.22.2.3.1.5INTEGERread-onlycurrent
portSecurity
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.22.2.4
portSecurityModeTable
OBJECT-TYPE
Port security mode
1.3.6.1.4.1.8691.7.69.1.22.2.4.1not-accessiblecurrent
portSecurityModeEntry
OBJECT-TYPE
Port security mode entry.
1.3.6.1.4.1.8691.7.69.1.22.2.4.1.1not-accessiblecurrent
portSecurityModePort
OBJECT-TYPE
Set port security mode to specific port.
1.3.6.1.4.1.8691.7.69.1.22.2.4.1.1.1INTEGERread-onlycurrent
portSecurityModeSelect
OBJECT-TYPE
Select the port security mode of the port.
1.3.6.1.4.1.8691.7.69.1.22.2.4.1.1.2INTEGER {normal-mode(0), static-portlock(1), mac-address-sticky(2)}read-createcurrent
portSecurityModeLimit
OBJECT-TYPE
If port security mode is MAC address sticky, set the limit of the port. If port security mode is not MAC address sticky, set the limit to 0.
1.3.6.1.4.1.8691.7.69.1.22.2.4.1.1.3INTEGERread-createcurrent
portSecurityModeViolationPortDisable
OBJECT-TYPE
Enable the violation port disable.
1.3.6.1.4.1.8691.7.69.1.22.2.4.1.1.4INTEGER {disable(0), enable(1)}read-createcurrent
portSecurityModeStatus
OBJECT-TYPE
The status is active to indicate normal. Use createAndGo to create new on multiple SET.
1.3.6.1.4.1.8691.7.69.1.22.2.4.1.1.5INTEGER {active(1), createAndGo(4)}read-createcurrent
staticPortLock
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.22.2.4.2
staticPortLockAddress
OBJECT-TYPE
The static port lock address.
1.3.6.1.4.1.8691.7.69.1.22.2.4.2.1MacAddressread-createcurrent
staticPortLockPort
OBJECT-TYPE
The port of the static port lock address.
1.3.6.1.4.1.8691.7.69.1.22.2.4.2.2INTEGERread-createcurrent
staticPortLockStatus
OBJECT-TYPE
The status is active to indicate normal. Use createAndGo to create new on multiple SET.
1.3.6.1.4.1.8691.7.69.1.22.2.4.2.3INTEGER {active(1), createAndGo(4)}read-createcurrent
staticPortLockVid
OBJECT-TYPE
Add vlan of the static port lock address. For SVL switch, vid should be 0
1.3.6.1.4.1.8691.7.69.1.22.2.4.2.4INTEGERread-createcurrent
macAddressSticky
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.22.2.4.3
macAddressStickyAddress
OBJECT-TYPE
Manually add a MAC sticky address.
1.3.6.1.4.1.8691.7.69.1.22.2.4.3.1MacAddressread-createcurrent
macAddressStickyPort
OBJECT-TYPE
Add MAC sticky address to the specific port.
1.3.6.1.4.1.8691.7.69.1.22.2.4.3.2INTEGERread-createcurrent
macAddressStickyVid
OBJECT-TYPE
Add MAC sticky address to the specific vlan. For SVL switch, vid should be 0
1.3.6.1.4.1.8691.7.69.1.22.2.4.3.3INTEGERread-createcurrent
macAddressStickyStatus
OBJECT-TYPE
The status is active to indicate normal. Use createAndGo to create new on multiple SET.
1.3.6.1.4.1.8691.7.69.1.22.2.4.3.4INTEGER {active(1), createAndGo(4)}read-createcurrent
mab
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.22.2.5
mabDBOption
OBJECT-TYPE
Set MAB database option.
1.3.6.1.4.1.8691.7.69.1.22.2.5.1INTEGER {radius(2)}read-writecurrent
mabReauthEnable
OBJECT-TYPE
Enable/Disable MAB Re-authorizing.
1.3.6.1.4.1.8691.7.69.1.22.2.5.2INTEGER {disable(0), enable(1)}read-writecurrent
mabReauthPeriod
OBJECT-TYPE
Set MAB Re-authorizing Period.
1.3.6.1.4.1.8691.7.69.1.22.2.5.3INTEGER (60..65535)read-writecurrent
mabRestartEnable
OBJECT-TYPE
Enable/Disable MAB Re-start.
1.3.6.1.4.1.8691.7.69.1.22.2.5.4INTEGER {disable(0), enable(1)}read-writecurrent
mabRestartPeriod
OBJECT-TYPE
Set MAB Re-start Period.
1.3.6.1.4.1.8691.7.69.1.22.2.5.5INTEGER (5..300)read-writecurrent
mabSettingTable
OBJECT-TYPE
MAB Setting Table.
1.3.6.1.4.1.8691.7.69.1.22.2.5.6not-accessiblecurrent
mabSettingEntry
OBJECT-TYPE
MAB Port Setting Entry.
1.3.6.1.4.1.8691.7.69.1.22.2.5.6.1not-accessiblecurrent
enableMAB
OBJECT-TYPE
Enable/Disable MAB.
1.3.6.1.4.1.8691.7.69.1.22.2.5.6.1.1INTEGER {disable(0), enable(1)}read-writecurrent
accessibleIP
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.30
enableAccessibleIP
OBJECT-TYPE
Enable the accessible IP address list.
1.3.6.1.4.1.8691.7.69.1.30.1INTEGER {disable(0), enable(1)}read-writecurrent
accessibleIpTable
OBJECT-TYPE
accessibleIP.
1.3.6.1.4.1.8691.7.69.1.30.2not-accessiblecurrent
accessibleIpEntry
OBJECT-TYPE
Accessible IP address entry.
1.3.6.1.4.1.8691.7.69.1.30.2.1not-accessiblecurrent
accessibleIpAddress
OBJECT-TYPE
Accessible IP address
1.3.6.1.4.1.8691.7.69.1.30.2.1.1IpAddressread-createcurrent
accessibleIpNetMask
OBJECT-TYPE
Accessible IP netmask.
1.3.6.1.4.1.8691.7.69.1.30.2.1.2IpAddressread-createcurrent
accessibleIpStatus
OBJECT-TYPE
The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then actvie. Use destroy to delete this row.
1.3.6.1.4.1.8691.7.69.1.30.2.1.3INTEGER {active(1), createAndGo(4), createAndWait(5), destroy(6)}read-createcurrent
sysFileUpdate
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.31
tftpServer
OBJECT-TYPE
The TFTP Server name(IP Address)
1.3.6.1.4.1.8691.7.69.1.31.1DisplayStringread-writecurrent
firmwarePathName
OBJECT-TYPE
The path name of firmware file in the TFTP Server
1.3.6.1.4.1.8691.7.69.1.31.2DisplayStringread-writecurrent
logPathName
OBJECT-TYPE
The path name of log file in the TFTP Server
1.3.6.1.4.1.8691.7.69.1.31.3DisplayStringread-writecurrent
confPathName
OBJECT-TYPE
The path name of configuration file in the TFTP Server
1.3.6.1.4.1.8691.7.69.1.31.4DisplayStringread-writecurrent
tftpUpdate
OBJECT-TYPE
1.3.6.1.4.1.8691.7.69.1.31.5INTEGER {importFirmware(1), importConfig(2), exportConfig(3), exportLog(4)}read-createcurrent
timeSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.32
sysDateTime
OBJECT-TYPE
The date time of system
1.3.6.1.4.1.8691.7.69.1.32.1DateAndTimeread-writecurrent
calibratePeriod
OBJECT-TYPE
The period (seconds) that calibrate with time server
1.3.6.1.4.1.8691.7.69.1.32.2INTEGERread-writecurrent
timeServer1
OBJECT-TYPE
The first time server
1.3.6.1.4.1.8691.7.69.1.32.3DisplayStringread-writecurrent
timeServer2
OBJECT-TYPE
The second time server
1.3.6.1.4.1.8691.7.69.1.32.4DisplayStringread-writecurrent
daylightSaving
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.32.5
startMonth
OBJECT-TYPE
Setting Start Month of Daylight Saving time
1.3.6.1.4.1.8691.7.69.1.32.5.1INTEGER {na(0), jan(1), feb(2), mar(3), apr(4), may(5), jun(6), jul(7), aug(8), sep(9), oct(10), nov(11), dec(12)}read-writecurrent
startWeek
OBJECT-TYPE
Setting Start Week of Daylight Saving time
1.3.6.1.4.1.8691.7.69.1.32.5.2INTEGER {na(0), week1(1), week2(2), week3(3), week4(4), weeklast(6)}read-writecurrent
startDay
OBJECT-TYPE
Setting Start Day of Daylight Saving time
1.3.6.1.4.1.8691.7.69.1.32.5.3INTEGER {na(0), sun(1), mon(2), tue(3), wed(4), thu(5), fri(6), sat(7)}read-writecurrent
startHour
OBJECT-TYPE
Setting Start Hour of Daylight Saving time
1.3.6.1.4.1.8691.7.69.1.32.5.4INTEGERread-writecurrent
endMonth
OBJECT-TYPE
Setting End Month of Daylight Saving time
1.3.6.1.4.1.8691.7.69.1.32.5.5INTEGER {na(0), jan(1), feb(2), mar(3), apr(4), may(5), jun(6), jul(7), aug(8), sep(9), oct(10), nov(11), dec(12)}read-writecurrent
endWeek
OBJECT-TYPE
Setting End Week of Daylight Saving time
1.3.6.1.4.1.8691.7.69.1.32.5.6INTEGER {na(0), week1(1), week2(2), week3(3), week4(4), weeklast(6)}read-writecurrent
endDay
OBJECT-TYPE
Setting End Day of Daylight Saving time
1.3.6.1.4.1.8691.7.69.1.32.5.7INTEGER {na(0), sun(1), mon(2), tue(3), wed(4), thu(5), fri(6), sat(7)}read-writecurrent
endHour
OBJECT-TYPE
Setting End Hour of Daylight Saving time
1.3.6.1.4.1.8691.7.69.1.32.5.8INTEGERread-writecurrent
offsetHours
OBJECT-TYPE
Setting Offset Hours of Daylight Saving time
1.3.6.1.4.1.8691.7.69.1.32.5.9INTEGERread-writecurrent
enableNTPServer
OBJECT-TYPE
This enable NTP Server.
1.3.6.1.4.1.8691.7.69.1.32.6INTEGER {disable(0), enable(1)}read-writecurrent
clockSource
OBJECT-TYPE
The clock source of system
1.3.6.1.4.1.8691.7.69.1.32.7INTEGER {local(0), sntp(1), ntp(2)}read-writecurrent
ntpAuthenticate
OBJECT-TYPE
NTP authentication
1.3.6.1.4.1.8691.7.69.1.32.8INTEGER {disable(0), enable(1)}read-writecurrent
ntpPeerTable
OBJECT-TYPE
NTP peer table
1.3.6.1.4.1.8691.7.69.1.32.9not-accessiblecurrent
ntpPeerEntry
OBJECT-TYPE
NTP peer settings
1.3.6.1.4.1.8691.7.69.1.32.9.1not-accessiblecurrent
ntpPeerIndex
OBJECT-TYPE
NTP peer index
1.3.6.1.4.1.8691.7.69.1.32.9.1.1INTEGERread-onlycurrent
ntpPeerAddress
OBJECT-TYPE
NTP peer address
1.3.6.1.4.1.8691.7.69.1.32.9.1.2DisplayStringread-writecurrent
ntpPeerAuthenticate
OBJECT-TYPE
NTP authentication
1.3.6.1.4.1.8691.7.69.1.32.9.1.3INTEGER {disable(0), enable(1)}read-writecurrent
ntpPeerAuthenticateKeyid
OBJECT-TYPE
NTP authentication key Id
1.3.6.1.4.1.8691.7.69.1.32.9.1.4INTEGERread-writecurrent
ntpAuthenticateKeyTable
OBJECT-TYPE
NTP authenticate key table
1.3.6.1.4.1.8691.7.69.1.32.10not-accessiblecurrent
ntpAuthenticateKeyEntry
OBJECT-TYPE
NTP authenticate key settings
1.3.6.1.4.1.8691.7.69.1.32.10.1not-accessiblecurrent
ntpAuthenticateKeyIndex
OBJECT-TYPE
NTP authenticate key index
1.3.6.1.4.1.8691.7.69.1.32.10.1.1INTEGERread-onlycurrent
ntpAuthenticateKeyID
OBJECT-TYPE
NTP authenticate key id
1.3.6.1.4.1.8691.7.69.1.32.10.1.2INTEGERread-writecurrent
ntpAuthenticateKeyString
OBJECT-TYPE
NTP authenticate key string
1.3.6.1.4.1.8691.7.69.1.32.10.1.3DisplayStringread-writecurrent
ntpAuthenticateKeyTrusted
OBJECT-TYPE
NTP authenticate key trusted
1.3.6.1.4.1.8691.7.69.1.32.10.1.4INTEGER {distrust(0), trusted(1)}read-writecurrent
dipSwitchSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.34
dipSwitchEnableTurboRing
OBJECT-TYPE
Enable TurboRing Dip Switch functions
1.3.6.1.4.1.8691.7.69.1.34.1INTEGER {disable(0), enable(1)}read-writecurrent
dipSwitchTurboRingPole
OBJECT-TYPE
The TurboRing Pole status of Dip switch.
1.3.6.1.4.1.8691.7.69.1.34.2INTEGER {off(0), on(1)}read-onlycurrent
dipSwitchRingCouplingPole
OBJECT-TYPE
The Ring Coupling Pole status of Dip switch.
1.3.6.1.4.1.8691.7.69.1.34.3INTEGER {off(0), on(1)}read-onlycurrent
dipSwitchRingMasterPole
OBJECT-TYPE
The Ring Master Pole status of Dip switch.
1.3.6.1.4.1.8691.7.69.1.34.4INTEGER {off(0), on(1)}read-onlycurrent
backupMediaSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.35
abc02Status
OBJECT-TYPE
Current status of ABC-02
1.3.6.1.4.1.8691.7.69.1.35.2INTEGER {device-not-present(0), unauthorized-media(1), detecting(2), working(3), ready-and-removable(4)}read-onlycurrent
abc02AutoImportConfig
OBJECT-TYPE
Auto load configuration from ABC to system when boot up
1.3.6.1.4.1.8691.7.69.1.35.3INTEGER {disable(0), enable(1)}read-writecurrent
abc02AutoExportConfig
OBJECT-TYPE
Auto backup to ABC-02 when configuration change
1.3.6.1.4.1.8691.7.69.1.35.4INTEGER {disable(0), enable(1)}read-writecurrent
abc02AutoExportLog
OBJECT-TYPE
Auto backup of event log to prevent overwrite
1.3.6.1.4.1.8691.7.69.1.35.5INTEGER {disable(0), enable(1)}read-writecurrent
enableWarmStart
OBJECT-TYPE
Enable to restart MOXA ethernet switch.
1.3.6.1.4.1.8691.7.69.1.36INTEGER {no(0), yes(1)}read-writecurrent
syslogSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.37
syslogServer1
OBJECT-TYPE
The syslog server 1
1.3.6.1.4.1.8691.7.69.1.37.1DisplayStringread-writecurrent
syslogServer1port
OBJECT-TYPE
The syslog server 1 port
1.3.6.1.4.1.8691.7.69.1.37.2INTEGERread-writecurrent
syslogServer2
OBJECT-TYPE
The syslog server 2
1.3.6.1.4.1.8691.7.69.1.37.3DisplayStringread-writecurrent
syslogServer2port
OBJECT-TYPE
The syslog server 2 port
1.3.6.1.4.1.8691.7.69.1.37.4INTEGERread-writecurrent
syslogServer3
OBJECT-TYPE
The syslog server 3
1.3.6.1.4.1.8691.7.69.1.37.5DisplayStringread-writecurrent
syslogServer3port
OBJECT-TYPE
The syslog server 3 port
1.3.6.1.4.1.8691.7.69.1.37.6INTEGERread-writecurrent
dhcpRelayAgentSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.39
dhcpServer1
OBJECT-TYPE
The dhcp Relay Agent Server 1.
1.3.6.1.4.1.8691.7.69.1.39.1DisplayStringread-writecurrent
dhcpServer2
OBJECT-TYPE
The dhcp Relay Agent Server 2.
1.3.6.1.4.1.8691.7.69.1.39.2DisplayStringread-writecurrent
dhcpServer3
OBJECT-TYPE
The dhcp Relay Agent Server 3.
1.3.6.1.4.1.8691.7.69.1.39.3DisplayStringread-writecurrent
dhcpServer4
OBJECT-TYPE
The dhcp Relay Agent Server 4.
1.3.6.1.4.1.8691.7.69.1.39.4DisplayStringread-writecurrent
option82Setting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.39.5
enableOption82
OBJECT-TYPE
Enable DHCP Option 82
1.3.6.1.4.1.8691.7.69.1.39.5.1INTEGER {disable(0), enable(1)}read-writecurrent
option82Type
OBJECT-TYPE
Option 82 Type selector
1.3.6.1.4.1.8691.7.69.1.39.5.2INTEGER {ip(0), mac(1), client-id(2), other(3)}read-writecurrent
option82Value
OBJECT-TYPE
Option 82 Type Value
1.3.6.1.4.1.8691.7.69.1.39.5.3DisplayStringread-writecurrent
option82ValueDisplay
OBJECT-TYPE
Option 82 Type Value Display
1.3.6.1.4.1.8691.7.69.1.39.5.4DisplayStringread-onlycurrent
dhcpFunctionTable
OBJECT-TYPE
DHCP Function Table.
1.3.6.1.4.1.8691.7.69.1.39.6not-accessiblecurrent
dhcpFunctionEntry
OBJECT-TYPE
DHCP Function Table Entry.
1.3.6.1.4.1.8691.7.69.1.39.6.1not-accessiblecurrent
dhcpPortIndex
OBJECT-TYPE
The DHCP Port Index.
1.3.6.1.4.1.8691.7.69.1.39.6.1.1INTEGERread-onlycurrent
circuitID
OBJECT-TYPE
The Circuit ID.
1.3.6.1.4.1.8691.7.69.1.39.6.1.2DisplayStringread-onlycurrent
option82Enable
OBJECT-TYPE
This enable option 82 of the port.
1.3.6.1.4.1.8691.7.69.1.39.6.1.3INTEGER {disable(0), enable(1)}read-writecurrent
ieee1588Setting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.41
ptpv1Setting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.41.1
enablePtpv1
OBJECT-TYPE
This enable the PTP functon.
1.3.6.1.4.1.8691.7.69.1.41.1.1INTEGER {disable(0), enable(1)}read-writecurrent
clockModev1
OBJECT-TYPE
the clock mode of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.1.2INTEGER {v1BC(0), v2E2E2stepTC(1), v2P2PTC(3), v2E2EBC(4), v2P2PBC(5)}read-writecurrent
syncIntervalv1
OBJECT-TYPE
the logSyncInterval of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.1.3INTEGER {oneSec(0), twoSec(1), fourSec(2), eightSec(3), sixteenSec(4)}read-writecurrent
subDomainNamev1
OBJECT-TYPE
The subdomain name of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.1.4INTEGER {dflt(0), alt1(1), alt2(2), alt3(3)}read-writecurrent
preferMasterv1
OBJECT-TYPE
This enable the PTP prefer master function.
1.3.6.1.4.1.8691.7.69.1.41.1.5INTEGER {false(0), true(1)}read-writecurrent
ptpv2Setting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.41.2
enablePtp
OBJECT-TYPE
This enable the PTP functon.
1.3.6.1.4.1.8691.7.69.1.41.2.1INTEGER {disable(0), enable(1)}read-writecurrent
clockMode
OBJECT-TYPE
the clock mode of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.2.2INTEGER {v1BC(0), v2E2E2stepTC(1), v2P2PTC(3), v2E2EBC(4), v2P2PBC(5)}read-writecurrent
transport
OBJECT-TYPE
the transport mode of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.2.3INTEGER {ieee802dot3(0), ipv4(1)}read-writecurrent
syncInterval
OBJECT-TYPE
the logSyncInterval of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.2.4INTEGER {t128msec(-3), t256msec(-2), t512msec(-1), t1sec(0), t2sec(1)}read-writecurrent
logMinDelayReqInterval
OBJECT-TYPE
the logMinDelayReqInterval of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.2.5INTEGER {t1sec(0), t2sec(1), t4sec(2), t8sec(3), t16sec(4), t32sec(5)}read-writecurrent
logMinPdelayReqInterval
OBJECT-TYPE
the logMinPdelayReqInterval of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.2.6INTEGER {t512msec(-1), t1sec(0), t2sec(1), t4sec(2), t8sec(3), t16sec(4), t32sec(5)}read-writecurrent
logAnnounceInterval
OBJECT-TYPE
the logAnnounceInterval of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.2.7INTEGER {t1sec(0), t2sec(1), t4sec(2), t8sec(3), t16sec(4)}read-writecurrent
announceReceiptTimeout
OBJECT-TYPE
the announceReceiptTimeout of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.2.8INTEGER (2..10)read-writecurrent
priority1
OBJECT-TYPE
the priority1 of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.2.9INTEGERread-writecurrent
priority2
OBJECT-TYPE
the priority2 of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.2.10INTEGERread-writecurrent
clockClass
OBJECT-TYPE
the clockClass of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.2.11INTEGERread-writecurrent
domainNumber
OBJECT-TYPE
The domain number of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.2.12INTEGER {dflt(0), alt1(1), alt2(2), alt3(3)}read-writecurrent
localUtcOffset
OBJECT-TYPE
the UTC offset of the local PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.2.13INTEGERread-writecurrent
localUtcOffsetValid
OBJECT-TYPE
the UTC offset valid of the local PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.2.14INTEGER {false(0), true(1)}read-writecurrent
localLeap59
OBJECT-TYPE
the leap59 of the local PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.2.15INTEGER {false(0), true(1)}read-writecurrent
localLeap61
OBJECT-TYPE
the leap61 of the local PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.2.16INTEGER {false(0), true(1)}read-writecurrent
localPtpTimescale
OBJECT-TYPE
the timescale of the local PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.2.17INTEGER {arb(0), ptp(1)}read-writecurrent
localArbTime
OBJECT-TYPE
the ARB time of the local PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.2.18INTEGERread-writecurrent
ptpv1Status
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.41.3
offsetToMasterv1
OBJECT-TYPE
The offset to master for nsec.
1.3.6.1.4.1.8691.7.69.1.41.3.1INTEGERread-onlycurrent
meanPathDelayv1
OBJECT-TYPE
The mean path delay of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.3.2INTEGERread-onlycurrent
grandMasterUuidv1
OBJECT-TYPE
The grand master UUID address of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.3.3MacAddressread-onlycurrent
parentUuidv1
OBJECT-TYPE
The parent master UUID address of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.3.4MacAddressread-onlycurrent
clockStratumv1
OBJECT-TYPE
The clock stratum of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.3.5INTEGERread-onlycurrent
clockIdentifierv1
OBJECT-TYPE
The clock identifier of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.3.6DisplayStringread-onlycurrent
ptpv2Status
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.41.4
offsetToMaster
OBJECT-TYPE
The offset to master for nsec.
1.3.6.1.4.1.8691.7.69.1.41.4.1INTEGERread-onlycurrent
meanPathDelay
OBJECT-TYPE
The mean path delay of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.4.2INTEGERread-onlycurrent
parentIdentity
OBJECT-TYPE
The parent identity of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.4.3DisplayStringread-onlycurrent
grandmasterIdentity
OBJECT-TYPE
The grandmaster identity of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.4.4DisplayStringread-onlycurrent
grandmasterClockClass
OBJECT-TYPE
The grandmaster clockClass of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.4.5INTEGERread-onlycurrent
grandmasterClockAccuracy
OBJECT-TYPE
The grandmaster clockAccuracy of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.4.6INTEGERread-onlycurrent
grandmasterPriority1
OBJECT-TYPE
The grandmaster priority1 of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.4.7INTEGERread-onlycurrent
grandmasterPriority2
OBJECT-TYPE
The grandmaster priority2 of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.4.8INTEGERread-onlycurrent
stepsRemoved
OBJECT-TYPE
The steps removed of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.4.9INTEGERread-onlycurrent
currentUtcOffset
OBJECT-TYPE
The current utc offset of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.4.10INTEGERread-onlycurrent
currentUtcOffsetValid
OBJECT-TYPE
The current utc offset valid flag of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.4.11DisplayStringread-onlycurrent
leap59
OBJECT-TYPE
The leap59 of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.4.12DisplayStringread-onlycurrent
leap61
OBJECT-TYPE
The leap61 of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.4.13DisplayStringread-onlycurrent
ptpTimescale
OBJECT-TYPE
The ptp timescale of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.4.14DisplayStringread-onlycurrent
timesource
OBJECT-TYPE
The timesource of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.4.15DisplayStringread-onlycurrent
ptpPortTable
OBJECT-TYPE
The ptp port table.
1.3.6.1.4.1.8691.7.69.1.41.5not-accessiblecurrent
ptpPortEntry
OBJECT-TYPE
The ptp port entry.
1.3.6.1.4.1.8691.7.69.1.41.5.1not-accessiblecurrent
ptpPortIndex
OBJECT-TYPE
The ptp port index.
1.3.6.1.4.1.8691.7.69.1.41.5.1.1INTEGERread-onlycurrent
ptpPortEnable
OBJECT-TYPE
This enable the ptp port.
1.3.6.1.4.1.8691.7.69.1.41.5.1.2INTEGER {disable(0), enable(1)}read-writecurrent
ptpPortStatus
OBJECT-TYPE
This port status of the PTP clock.
1.3.6.1.4.1.8691.7.69.1.41.5.1.3INTEGER {ptpInitializing(0), ptpFaulty(1), ptpDisabled(2), ptpListening(3), ptpPreMaster(4), ptpMaster(5), ptpPassive(6), ptpUncalibrated(7), ptpSlave(8)}read-onlycurrent
diagnosis
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.42
lldpSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.42.1
enableLLDP
OBJECT-TYPE
This enable the LLDP functon.
1.3.6.1.4.1.8691.7.69.1.42.1.1INTEGER {disable(0), enable(1)}read-writecurrent
lldpMSGInterval
OBJECT-TYPE
The LLDP message transmit interval.
1.3.6.1.4.1.8691.7.69.1.42.1.2INTEGERread-writecurrent
agingTime
OBJECT-TYPE
Web Timeout
1.3.6.1.4.1.8691.7.69.1.44INTEGERread-writecurrent
garpSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.45
joinTime
OBJECT-TYPE
Join Time (ms).
1.3.6.1.4.1.8691.7.69.1.45.1INTEGERread-writecurrent
leaveTime
OBJECT-TYPE
Leave Time (ms).
1.3.6.1.4.1.8691.7.69.1.45.2INTEGERread-writecurrent
leaveAllTime
OBJECT-TYPE
Leaveall Time (ms).
1.3.6.1.4.1.8691.7.69.1.45.3INTEGERread-writecurrent
eventlog
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.46
eventlogTable
OBJECT-TYPE
The table of eventlog.
1.3.6.1.4.1.8691.7.69.1.46.1not-accessiblecurrent
eventlogEntry
OBJECT-TYPE
The table entry of eventlog.
1.3.6.1.4.1.8691.7.69.1.46.1.1not-accessiblecurrent
eventlogIndex
OBJECT-TYPE
The index of eventlog entry.
1.3.6.1.4.1.8691.7.69.1.46.1.1.1INTEGERread-onlycurrent
eventlogBootup
OBJECT-TYPE
The reboot count of the system.
1.3.6.1.4.1.8691.7.69.1.46.1.1.2INTEGERread-onlycurrent
eventlogDate
OBJECT-TYPE
The date of the event occured.
1.3.6.1.4.1.8691.7.69.1.46.1.1.3DisplayStringread-onlycurrent
eventlogTime
OBJECT-TYPE
The time of the event occured.
1.3.6.1.4.1.8691.7.69.1.46.1.1.4DisplayStringread-onlycurrent
eventlogUptime
OBJECT-TYPE
The time of the event occured after booting up.
1.3.6.1.4.1.8691.7.69.1.46.1.1.5DisplayStringread-onlycurrent
eventlogEvent
OBJECT-TYPE
The event which occured in the system.
1.3.6.1.4.1.8691.7.69.1.46.1.1.6DisplayStringread-onlycurrent
eventlogClear
OBJECT-TYPE
To clear the eventlog, set value 1 to this field.
1.3.6.1.4.1.8691.7.69.1.46.2INTEGER {noop(0), clear(1)}read-writecurrent
industrialProtocol
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.47
eipSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.47.1
enableEtherNetIP
OBJECT-TYPE
This enable the EtherNet/IP functon.
1.3.6.1.4.1.8691.7.69.1.47.1.1INTEGER {disable(0), enable(1)}read-writecurrent
modbusSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.47.2
enableModbus
OBJECT-TYPE
This enable the Modbus functon.
1.3.6.1.4.1.8691.7.69.1.47.2.1INTEGER {disable(0), enable(1)}read-writecurrent
profinetioSetting
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.47.3
enableProfinetIO
OBJECT-TYPE
This enable the PROFINET IO functon.
1.3.6.1.4.1.8691.7.69.1.47.3.1INTEGER {disable(0), enable(1)}read-writecurrent
enableFactoryDefault
OBJECT-TYPE
Reset all EtherDevice switch settings to factory default values
1.3.6.1.4.1.8691.7.69.1.48INTEGER {activate(1)}read-writecurrent
consoleLoginMode
OBJECT-TYPE
This option can change console login mode.
1.3.6.1.4.1.8691.7.69.1.51INTEGER {menu(0), cli(1)}read-writecurrent
accessControlList
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.52
accessControlTable
OBJECT-TYPE
The table of ACL rule settings. This table is used to configure ACL rules.
1.3.6.1.4.1.8691.7.69.1.52.1not-accessiblecurrent
accessControlEntry
OBJECT-TYPE
The entry information of ACL table.
1.3.6.1.4.1.8691.7.69.1.52.1.1not-accessiblecurrent
aclRuleIndex
OBJECT-TYPE
The index of the ACL rule.
1.3.6.1.4.1.8691.7.69.1.52.1.1.1INTEGERread-createcurrent
listID
OBJECT-TYPE
The listID of the ACL rule.
1.3.6.1.4.1.8691.7.69.1.52.1.1.2INTEGERread-createcurrent
filterType
OBJECT-TYPE
The type of the ACL filter.
1.3.6.1.4.1.8691.7.69.1.52.1.1.3INTEGER {ipBase(0), macBase(1)}read-createcurrent
actionFlag
OBJECT-TYPE
The action of the ACL rule.
1.3.6.1.4.1.8691.7.69.1.52.1.1.4INTEGER {permit(0), deny(1)}read-createcurrent
srcMacAddr
OBJECT-TYPE
The source MAC address of the ACL rule.
1.3.6.1.4.1.8691.7.69.1.52.1.1.5MacAddressread-createcurrent
srcMacMask
OBJECT-TYPE
The mask of the source MAC address in the ACL rule.
1.3.6.1.4.1.8691.7.69.1.52.1.1.6MacAddressread-createcurrent
dstMacAddr
OBJECT-TYPE
The destination MAC address of the ACL rule.
1.3.6.1.4.1.8691.7.69.1.52.1.1.7MacAddressread-createcurrent
dstMacMask
OBJECT-TYPE
The mask of the destination MAC address in the ACL rule.
1.3.6.1.4.1.8691.7.69.1.52.1.1.8MacAddressread-createcurrent
etherType
OBJECT-TYPE
The ether type of the ACL rule. This setting will apply to both ARP and RARP traffic stream due to hardware platform design ! ! ! Because of hardware platform limitations, when Ether type ARP is selected the switch will not be able to filter packets by specific destination address ! ! !
1.3.6.1.4.1.8691.7.69.1.52.1.1.9INTEGERread-createcurrent
vlanID
OBJECT-TYPE
The VLAN ID of the ACL rule.
1.3.6.1.4.1.8691.7.69.1.52.1.1.10INTEGER (1..4094)read-createcurrent
srcIpAddr
OBJECT-TYPE
The source IP address of the ACL rule.
1.3.6.1.4.1.8691.7.69.1.52.1.1.11IpAddressread-createcurrent
srcNetmask
OBJECT-TYPE
The source IP address's mask of the ACL rule.
1.3.6.1.4.1.8691.7.69.1.52.1.1.12IpAddressread-createcurrent
dstIpAddr
OBJECT-TYPE
The destination IP address of the ACL rule
1.3.6.1.4.1.8691.7.69.1.52.1.1.13IpAddressread-createcurrent
dstNetmask
OBJECT-TYPE
The destination IP address's mask of the ACL rule.
1.3.6.1.4.1.8691.7.69.1.52.1.1.14IpAddressread-createcurrent
protocolCode
OBJECT-TYPE
The protocol code of the ACL rule.
1.3.6.1.4.1.8691.7.69.1.52.1.1.15INTEGERread-createcurrent
srcsocketPort
OBJECT-TYPE
The source UDP/TCP port of the ACL rule.
1.3.6.1.4.1.8691.7.69.1.52.1.1.16INTEGERread-createcurrent
dstsocketPort
OBJECT-TYPE
The destination UDP/TCP port of the ACL rule.
1.3.6.1.4.1.8691.7.69.1.52.1.1.17INTEGERread-createcurrent
aclStatus
OBJECT-TYPE
The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then actvie. Use destroy to delete this row.
1.3.6.1.4.1.8691.7.69.1.52.1.1.18INTEGER {active(1), createAndGo(4), createAndWait(5), destroy(6)}read-createcurrent
aclAttachmentTable
OBJECT-TYPE
The table of ACL attachment settings. This table is used to configure ACL attachment port and list name.
1.3.6.1.4.1.8691.7.69.1.52.2not-accessiblecurrent
aclAttachmentEntry
OBJECT-TYPE
The entry information of ACL attachment table.
1.3.6.1.4.1.8691.7.69.1.52.2.1not-accessiblecurrent
aclID
OBJECT-TYPE
The listID of the ACL attachment entry.
1.3.6.1.4.1.8691.7.69.1.52.2.1.1INTEGERread-createcurrent
ingressPort
OBJECT-TYPE
The ingress ports of the ACL attachment entry.
1.3.6.1.4.1.8691.7.69.1.52.2.1.2PortListread-createcurrent
aclListName
OBJECT-TYPE
The ACL entry name.
1.3.6.1.4.1.8691.7.69.1.52.2.1.4DisplayStringread-createcurrent
cpuLoading5s
OBJECT-TYPE
CPU Loading for the past 5 seconds in %.
1.3.6.1.4.1.8691.7.69.1.53INTEGERread-onlycurrent
cpuLoading30s
OBJECT-TYPE
CPU Loading for the past 30 seconds in %.
1.3.6.1.4.1.8691.7.69.1.54INTEGERread-onlycurrent
cpuLoading300s
OBJECT-TYPE
CPU Loading for the past 5 minutes in %.
1.3.6.1.4.1.8691.7.69.1.55INTEGERread-onlycurrent
totalMemory
OBJECT-TYPE
Total size of System RAM.
1.3.6.1.4.1.8691.7.69.1.56INTEGERread-onlycurrent
freeMemory
OBJECT-TYPE
Total size of free dynamic memory
1.3.6.1.4.1.8691.7.69.1.57INTEGERread-onlycurrent
usedMemory
OBJECT-TYPE
Total size of used dynamic memory
1.3.6.1.4.1.8691.7.69.1.58INTEGERread-onlycurrent
memoryUsage
OBJECT-TYPE
The usage of memory size in %.
1.3.6.1.4.1.8691.7.69.1.59INTEGERread-onlycurrent
loopProtection
OBJECT-TYPE
This enable the Loop Protection functon.
1.3.6.1.4.1.8691.7.69.1.61INTEGER {disable(0), enable(1)}read-writecurrent
eventSettings
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.62
systemEventSettingsTable
OBJECT-TYPE
The system event settings table.
1.3.6.1.4.1.8691.7.69.1.62.1not-accessiblecurrent
systemEventSettingsEntry
OBJECT-TYPE
System Event Settings Entry.
1.3.6.1.4.1.8691.7.69.1.62.1.1not-accessiblecurrent
systemEventIndex
OBJECT-TYPE
Index of system event settings
1.3.6.1.4.1.8691.7.69.1.62.1.1.1INTEGERread-onlycurrent
systemEventActive
OBJECT-TYPE
Status of active of system event settings
1.3.6.1.4.1.8691.7.69.1.62.1.1.2INTEGER {inactive(0), active(1)}read-writecurrent
systemEventName
OBJECT-TYPE
Name of system event settings
1.3.6.1.4.1.8691.7.69.1.62.1.1.3DisplayStringread-onlycurrent
systemEventSupport
OBJECT-TYPE
Status of support modules of system event settings.
1.3.6.1.4.1.8691.7.69.1.62.1.1.4INTEGER {none(0), support-SNMPTrap-only(1), support-Email-only(2), support-SNMP-Trap-Email(3), support-Syslog-only(4), support-SNMPTrap-Syslog(5), support-Email-Syslog(6), support-SNMPTrap-Email-Syslog(7), support-Relay1-only(8), support-SNMPTrap-Relay1(9), support-Email-Relay1(10), support-SNMPTrap-Email-Relay1(11), support-Syslog-Relay1(12), support-SNMPTrap-Syslog-Relay1(13), support-Email-Syslog-Relay1(14), support-SNMPTrap-Email-Syslog-Relay1(15), support-Relay2-only(16), support-SNMPTrap-Relay2(17), support-Email-Relay2(18), support-SNMPTrap-Email-Relay2(19), support-Syslog-Relay2(20), support-SNMPTrap-Syslog-Relay2(21), support-Email-Syslog-Relay2(22), support-SNMPTrap-Email-Syslog-Relay2(23), support-Relay1-Relay2(24), support-SNMPTrap-Relay1-Relay2(25), support-Syslog-Relay1-Relay2(28), support-Email-Syslog-Relay1-Relay2(30), support-all-SNMPTrap-Email-Syslog-Relay1-Relay2(31)}read-onlycurrent
systemEventModuleEnable
OBJECT-TYPE
Status of enable of system event settings.
1.3.6.1.4.1.8691.7.69.1.62.1.1.5INTEGER {none(0), enable-SNMPTrap-only(1), enable-Email-only(2), enable-SNMPTrap-Email(3), enable-Syslog-only(4), enable-SNMPTrap-Syslog(5), enable-Email-Syslog(6), enable-SNMPTrap-Email-Syslog(7), enable-Relay1-only(8), enable-SNMPTrap-Relay1(9), enable-Email-Relay1(10), enable-SNMPTrap-Email-Relay1(11), enable-Syslog-Relay1(12), enable-SNMPTrap-Syslog-Relay1(13), enable-Email-Syslog-Relay1(14), enable-SNMPTrap-Email-Syslog-Relay1(15), enable-Relay2-only(16), enable-SNMPTrap-Relay2(17), enable-Email-Relay2(18), enable-SNMPTrap-Email-Relay2(19), enable-Syslog-Relay2(20), enable-SNMPTrap-Syslog-Relay2(21), enable-Email-Syslog-Relay2(22), enable-SNMPTrap-Email-Syslog-Relay2(23), enable-Relay1-Relay2(24), enable-SNMPTrap-Relay1-Relay2(25), enable-Syslog-Relay1-Relay2(28), enable-Email-Syslog-Relay1-Relay2(30), enable-All-SNMPTrap-Email-Syslog-Relay1-Relay2(31)}read-writecurrent
systemEventSeverity
OBJECT-TYPE
Severity of system event settings
1.3.6.1.4.1.8691.7.69.1.62.1.1.6INTEGER {emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), information(6), debug(7)}read-writecurrent
portEventSettingsTable
OBJECT-TYPE
The port event settings table.
1.3.6.1.4.1.8691.7.69.1.62.2not-accessiblecurrent
portEventSettingsEntry
OBJECT-TYPE
Port Event Settings Entry.
1.3.6.1.4.1.8691.7.69.1.62.2.1not-accessiblecurrent
portEventIndex
OBJECT-TYPE
Index of port event settings
1.3.6.1.4.1.8691.7.69.1.62.2.1.1INTEGERread-onlycurrent
portEventLabel
OBJECT-TYPE
Label of portEventIndex
1.3.6.1.4.1.8691.7.69.1.62.2.1.2DisplayStringread-onlycurrent
portEventActive
OBJECT-TYPE
Status of active of port event settings
1.3.6.1.4.1.8691.7.69.1.62.2.1.3INTEGER {inactive(0), active(1)}read-writecurrent
portEventEnable
OBJECT-TYPE
Status of event enable of port event settings
1.3.6.1.4.1.8691.7.69.1.62.2.1.4INTEGER {none(0), enable-LinkOn-only(1), enable-LinkOff-only(2), enable-LinkOn-LinkOff(3), enable-TrafficOverload-only(4), enable-LinkOn-TrafficOverload(5), enable-LinkOff-TrafficOverload(6), enable-All-LinkOn-LinkOff-TrafficOverload(7)}read-writecurrent
portEventTrafficThreshold
OBJECT-TYPE
Threshold of Traffic-Overload in percentage(%)
1.3.6.1.4.1.8691.7.69.1.62.2.1.5INTEGER (0..100)read-writecurrent
portEventTrafficDuration
OBJECT-TYPE
Duration of Traffic-Overload in secs(s)
1.3.6.1.4.1.8691.7.69.1.62.2.1.6INTEGER (1..300)read-writecurrent
portEventModuleEnable
OBJECT-TYPE
Status of module enable of port event settings.
1.3.6.1.4.1.8691.7.69.1.62.2.1.7INTEGER {none(0), enable-SNMPTrap-only(1), enable-Email-only(2), enable-SNMPTrap-Email(3), enable-Syslog-only(4), enable-SNMPTrap-Syslog(5), enable-Email-Syslog(6), enable-SNMPTrap-Email-Syslog(7), enable-Relay1-only(8), enable-SNMPTrap-Relay1(9), enable-Email-Relay1(10), enable-SNMPTrap-Email-Relay1(11), enable-Syslog-Relay1(12), enable-SNMPTrap-Syslog-Relay1(13), enable-Email-Syslog-Relay1(14), enable-SNMPTrap-Email-Syslog-Relay1(15), enable-Relay2-only(16), enable-SNMPTrap-Relay2(17), enable-Email-Relay2(18), enable-SNMPTrap-Email-Relay2(19), enable-Syslog-Relay2(20), enable-SNMPTrap-Syslog-Relay2(21), enable-Email-Syslog-Relay2(22), enable-SNMPTrap-Email-Syslog-Relay2(23), enable-Relay1-Relay2(24), enable-SNMPTrap-Relay1-Relay2(25), enable-Syslog-Relay1-Relay2(28), enable-Email-Syslog-Relay1-Relay2(30), enable-All-SNMPTrap-Email-Syslog-Relay1-Relay2(31)}read-writecurrent
portEventSeverity
OBJECT-TYPE
Severity of port event settings
1.3.6.1.4.1.8691.7.69.1.62.2.1.8INTEGER {emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), information(6), debug(7)}read-writecurrent
managementInterface
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.63
httpEnable
OBJECT-TYPE
Status of http service
1.3.6.1.4.1.8691.7.69.1.63.1INTEGER {disable(0), enable(1)}read-writecurrent
httpPort
OBJECT-TYPE
Port of http service
1.3.6.1.4.1.8691.7.69.1.63.2INTEGER (1..65535)read-writecurrent
sslEnable
OBJECT-TYPE
Status of ssl(https) service
1.3.6.1.4.1.8691.7.69.1.63.3INTEGER {disable(0), enable(1)}read-writecurrent
sslPort
OBJECT-TYPE
Port of ssl(https) service
1.3.6.1.4.1.8691.7.69.1.63.4INTEGER (1..65535)read-writecurrent
telnetEnable
OBJECT-TYPE
Status of telnet service
1.3.6.1.4.1.8691.7.69.1.63.5INTEGER {disable(0), enable(1)}read-writecurrent
telnetPort
OBJECT-TYPE
Port of telnet service
1.3.6.1.4.1.8691.7.69.1.63.6INTEGER (1..65535)read-writecurrent
sshEnable
OBJECT-TYPE
Status of ssh service
1.3.6.1.4.1.8691.7.69.1.63.7INTEGER {disable(0), enable(1)}read-writecurrent
sshPort
OBJECT-TYPE
Port of telnet service
1.3.6.1.4.1.8691.7.69.1.63.8INTEGER (1..65535)read-writecurrent
mgmtInterfaceAutoLogout
OBJECT-TYPE
Web Timeout (Mins). Set 0 to disable
1.3.6.1.4.1.8691.7.69.1.63.9INTEGER (0..1440)read-writecurrent
snmpdEnable
OBJECT-TYPE
Status of snmp agent
1.3.6.1.4.1.8691.7.69.1.63.10INTEGER {disable(0), enable(1)}read-writecurrent
snmpdPort
OBJECT-TYPE
Port of snmp agent
1.3.6.1.4.1.8691.7.69.1.63.11INTEGER (1..65535)read-onlycurrent
moxaUtilityServiceEnable
OBJECT-TYPE
Status of moxa utility service
1.3.6.1.4.1.8691.7.69.1.63.12INTEGER {disable(0), enable(1)}read-writecurrent
moxaUtilityServicePort
OBJECT-TYPE
Port of moxa utility service
1.3.6.1.4.1.8691.7.69.1.63.13INTEGER (1..65535)read-onlycurrent
httpMaxLoginUsers
OBJECT-TYPE
Configure HTTP/HTTPS maximum login users
1.3.6.1.4.1.8691.7.69.1.63.14INTEGER (1..10)read-writecurrent
telnetMaxLoginUsers
OBJECT-TYPE
Configure TELNET/SSH maximum login users
1.3.6.1.4.1.8691.7.69.1.63.15INTEGER (1..5)read-writecurrent
moxaNewCmdEnable
OBJECT-TYPE
Status of new moxa utility service
1.3.6.1.4.1.8691.7.69.1.63.16INTEGER {disable(0), enable(1)}read-writecurrent
switchLocator
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.64
blinkingLocatorLED
OBJECT-TYPE
Blinking switch locator LED.
1.3.6.1.4.1.8691.7.69.1.64.1INTEGER {off(0), on(1)}read-writecurrent
disableLocatorLEDTime
OBJECT-TYPE
Configure back-off time for disable switch locator LED.
1.3.6.1.4.1.8691.7.69.1.64.2INTEGERread-writecurrent
uiVersion
OBJECT-TYPE
New UI Version
1.3.6.1.4.1.8691.7.69.1.65INTEGERread-onlycurrent
supportIfXTable
OBJECT-TYPE
Support 64 bit Counter (ifXTable).
1.3.6.1.4.1.8691.7.69.1.69INTEGER {no(0), yes(1)}read-onlycurrent
passwordPolicy
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.70
pwdMinLength
OBJECT-TYPE
Configure the minimum password length.
1.3.6.1.4.1.8691.7.69.1.70.1INTEGER (4..16)read-writecurrent
pwdComplexityCheckEnable
OBJECT-TYPE
Enable password complexity check.
1.3.6.1.4.1.8691.7.69.1.70.2INTEGER {disable(0), enable(1)}read-writecurrent
pwdComplexityCheckDigitEnable
OBJECT-TYPE
Add password complexity check with digit.
1.3.6.1.4.1.8691.7.69.1.70.3INTEGER {disable(0), enable(1)}read-writecurrent
pwdComplexityCheckAlphabetEnable
OBJECT-TYPE
Add password complexity check with alphabet.
1.3.6.1.4.1.8691.7.69.1.70.4INTEGER {disable(0), enable(1)}read-writecurrent
pwdComplexityCheckSpecialCharEnable
OBJECT-TYPE
Add password complexity check with special-characters.
1.3.6.1.4.1.8691.7.69.1.70.5INTEGER {disable(0), enable(1)}read-writecurrent
loginLockout
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.71
loginFailureLockoutEnable
OBJECT-TYPE
Enable login failure lockout.
1.3.6.1.4.1.8691.7.69.1.71.1INTEGER {disable(0), enable(1)}read-writecurrent
loginFailureLockoutRetrys
OBJECT-TYPE
Configure login failure lockout retry threshhold.
1.3.6.1.4.1.8691.7.69.1.71.2INTEGER (1..10)read-writecurrent
loginFailureLockoutTime
OBJECT-TYPE
Configure login failure lockout time.(Min)
1.3.6.1.4.1.8691.7.69.1.71.3INTEGER (1..60)read-writecurrent
systemNotifyMessage
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.72
httpLoginMessage
OBJECT-TYPE
Configure HTTP/HTTPS login message.
1.3.6.1.4.1.8691.7.69.1.72.1DisplayStringread-writecurrent
httpLoginFailureMessage
OBJECT-TYPE
Configure HTTP/HTTPS login failure message.
1.3.6.1.4.1.8691.7.69.1.72.2DisplayStringread-writecurrent
syslogManagement
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.73
loggingCapacityThreshold
OBJECT-TYPE
Configure event log capacity warning threshold.
1.3.6.1.4.1.8691.7.69.1.73.1INTEGER (0..100)read-writecurrent
loggingCapacityTrapWarningEnable
OBJECT-TYPE
Enable event log capacity SNMP trap warning.
1.3.6.1.4.1.8691.7.69.1.73.2INTEGER {disable(0), enable(1)}read-writecurrent
loggingCapacityEmailWarningEnable
OBJECT-TYPE
Enable event log capacity email warning.
1.3.6.1.4.1.8691.7.69.1.73.3INTEGER {disable(0), enable(1)}read-writecurrent
loggingOversizeAction
OBJECT-TYPE
Set event log over-size action.
1.3.6.1.4.1.8691.7.69.1.73.4INTEGER {overwrite(0), stoprecord(1)}read-writecurrent
certificateManagement
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.1.74
sslCertGen
OBJECT-TYPE
Generate SSL certificate.
1.3.6.1.4.1.8691.7.69.1.74.1INTEGER {na(0), generate(1)}read-writecurrent
sshKeyGen
OBJECT-TYPE
Generate SSH host key.
1.3.6.1.4.1.8691.7.69.1.74.2INTEGER {na(0), generate(1)}read-writecurrent
ivlSwitch
OBJECT-TYPE
Current switch runs IVL(Independent Vlan Learning) or SVL(Shared Vlan Learning)
1.3.6.1.4.1.8691.7.69.1.76INTEGER {svl(0), ivl(1)}read-onlycurrent
supportMacSticky
OBJECT-TYPE
Support MAC Sticky feature or not.
1.3.6.1.4.1.8691.7.69.1.77INTEGER {not-support(0), support(1)}read-onlycurrent
serialNumber
OBJECT-TYPE
Serial Number
1.3.6.1.4.1.8691.7.69.1.78DisplayStringread-onlycurrent
configEncryptEnable
OBJECT-TYPE
Configuration File Encryption Setting.
1.3.6.1.4.1.8691.7.69.1.79INTEGER {disable(0), enable(1)}read-onlycurrent
swTraps
OBJECT-IDENTITY
1.3.6.1.4.1.8691.7.69.2
varconfigChangeTrap
OBJECT-TYPE
The configuration has been changed.
1.3.6.1.4.1.8691.7.69.2.1INTEGER {none(1), configChanged(2)}read-onlycurrent
varpower1Trap
OBJECT-TYPE
The power on/off changed.
1.3.6.1.4.1.8691.7.69.2.2INTEGER {none(1), on2off(2), off2on(3)}read-onlycurrent
varpower2Trap
OBJECT-TYPE
The power on/off changed.
1.3.6.1.4.1.8691.7.69.2.3INTEGER {none(1), on2off(2), off2on(3)}read-onlycurrent
vartrafficOverloadTrap
OBJECT-TYPE
The ethernet port's traffic loading exceeds the pre-defined value.
1.3.6.1.4.1.8691.7.69.2.4INTEGERread-onlycurrent
varredundancyTopologyChangedTrap
OBJECT-TYPE
The redundancy topology has been changed.
1.3.6.1.4.1.8691.7.69.2.5INTEGER {none(1), topologyChanged(2), topologyChangedTurboChainHead(3), topologyChangedTurboChainTail(4)}read-onlycurrent
varturboRingCouplingPortChangedTrap
OBJECT-TYPE
The coupling path of Turbo Ring has been changed.
1.3.6.1.4.1.8691.7.69.2.6INTEGER {none(1), couplingPortChanged(2)}read-onlycurrent
varturboRingMasterChangedTrap
OBJECT-TYPE
The master of Turbo Ring has been changed.
1.3.6.1.4.1.8691.7.69.2.7INTEGER {none(1), ringMasterChanged(2)}read-onlycurrent
varPortLoopDetectedTrap
OBJECT-TYPE
The DUT port is looping.
1.3.6.1.4.1.8691.7.69.2.17INTEGERread-onlycurrent
varRateLimitedOnTrap
OBJECT-TYPE
The DUT port is rate limit.
1.3.6.1.4.1.8691.7.69.2.18INTEGER {none(1), rateLimitON(2), rateLimitOFF(3)}read-onlycurrent
varLLDPChgTrap
OBJECT-TYPE
The LLDP table is changing.
1.3.6.1.4.1.8691.7.69.2.19INTEGERread-onlycurrent
varABC02WarningTrap
OBJECT-TYPE
Warning trap while specific error is occured in abc02.
1.3.6.1.4.1.8691.7.69.2.20INTEGER {noEnoughSpace(1), nnauthorizedMediaIsDetected(2), exportConfigurationFail(3), exportLogFail(4), autoImportConfigurationFail(5)}read-onlycurrent
varturboRingMasterMismatchTrap
OBJECT-TYPE
The master of Turbo Ring has been mismatch.
1.3.6.1.4.1.8691.7.69.2.22INTEGER {none(1), ringMasterMismatch(2)}read-onlycurrent
varUserAuthSuccessTrap
OBJECT-TYPE
Account authentication success.
1.3.6.1.4.1.8691.7.69.2.24OCTET STRINGread-onlycurrent
varUserAuthFailTrap
OBJECT-TYPE
Account authentication failed.
1.3.6.1.4.1.8691.7.69.2.25OCTET STRINGread-onlycurrent
varMacStickyPortViolationPortDisableTrap
OBJECT-TYPE
The number of sticky Mac address on the port was over the limit. A macStickyPortViolationPortDisableTrap will contain 3 elements: port, macaddr, and vlanid.
1.3.6.1.4.1.8691.7.69.2.26INTEGER {none(1), violationPortDisable(2)}read-onlycurrent
varFiberWarningTrap
OBJECT-TYPE
Warning trap while fiber is over threshold.
1.3.6.1.4.1.8691.7.69.2.28INTEGERread-onlycurrent
varLoggingCapacityTrap
OBJECT-TYPE
Warning trap while event log is over capacity threshold.
1.3.6.1.4.1.8691.7.69.2.29INTEGERread-onlycurrent
varUserInfoChgTrap
OBJECT-TYPE
Account information has been changed.
1.3.6.1.4.1.8691.7.69.2.31OCTET STRINGread-onlycurrent
varConfigImportTrap
OBJECT-TYPE
Configuration has been imported.
1.3.6.1.4.1.8691.7.69.2.32INTEGERread-onlycurrent
varRemoteAuthSuccessTrap
OBJECT-TYPE
The login authentication is successful by the remote server
1.3.6.1.4.1.8691.7.69.2.38INTEGER {tacacs(1), radius(2)}read-onlycurrent
varRemoteAuthFailTrap
OBJECT-TYPE
The login authentication is failed by the remote server
1.3.6.1.4.1.8691.7.69.2.39INTEGER {tacacs(1), radius(2)}read-onlycurrent

Notifications

NameOIDStatus
configChangeTrap
NOTIFICATION-TYPE
The configuration has been changed.
1.3.6.1.4.1.8691.7.69.0.1current
power1Trap
NOTIFICATION-TYPE
The power on/off changed.
1.3.6.1.4.1.8691.7.69.0.2current
power2Trap
NOTIFICATION-TYPE
The power on/off changed.
1.3.6.1.4.1.8691.7.69.0.3current
trafficOverloadTrap
NOTIFICATION-TYPE
The ethernet port's traffic loading exceeds the pre-defined value.
1.3.6.1.4.1.8691.7.69.0.4current
redundancyTopologyChangedTrap
NOTIFICATION-TYPE
The redundancy topology has been changed.
1.3.6.1.4.1.8691.7.69.0.5current
turboRingCouplingPortChangedTrap
NOTIFICATION-TYPE
The coupling path of Turbo Ring has been changed.
1.3.6.1.4.1.8691.7.69.0.6current
turboRingMasterChangedTrap
NOTIFICATION-TYPE
The master of Turbo Ring has been changed.
1.3.6.1.4.1.8691.7.69.0.7current
portLoopDetectedTrap
NOTIFICATION-TYPE
The DUT port is looping.
1.3.6.1.4.1.8691.7.69.0.17current
rateLimitedOnTrap
NOTIFICATION-TYPE
The DUT port rate limit is ON.
1.3.6.1.4.1.8691.7.69.0.18current
lldpChgTrap
NOTIFICATION-TYPE
The LLDP table is changing.
1.3.6.1.4.1.8691.7.69.0.19current
abc02WarningTrap
NOTIFICATION-TYPE
Warning trap while specific error is occured in abc02.
1.3.6.1.4.1.8691.7.69.0.20current
turboRingMasterMismatchTrap
NOTIFICATION-TYPE
The master of Turbo Ring has been mismatch.
1.3.6.1.4.1.8691.7.69.0.22current
userAuthSuccessTrap
NOTIFICATION-TYPE
Account authentication success.
1.3.6.1.4.1.8691.7.69.0.24current
userAuthFailTrap
NOTIFICATION-TYPE
Account authentication failed.
1.3.6.1.4.1.8691.7.69.0.25current
macStickyPortViolationPortDisableTrap
NOTIFICATION-TYPE
The number of sticky Mac address on the port was over the limit. A macStickyPortViolationPortDisableTrap will contain 3 elements: port, macaddr, and vlanid.
1.3.6.1.4.1.8691.7.69.0.26current
fiberWarningTrap
NOTIFICATION-TYPE
Warning trap while fiber is over threshold.
1.3.6.1.4.1.8691.7.69.0.28current
loggingCapacityTrap
NOTIFICATION-TYPE
Warning trap while event log is over capacity threshold.
1.3.6.1.4.1.8691.7.69.0.29current
userInfoChgTrap
NOTIFICATION-TYPE
Account information has been changed.
1.3.6.1.4.1.8691.7.69.0.31current
configImportTrap
NOTIFICATION-TYPE
Configuration has been imported.
1.3.6.1.4.1.8691.7.69.0.32current
remoteAuthSuccessTrap
NOTIFICATION-TYPE
The login authentication is successful by the remote server
1.3.6.1.4.1.8691.7.69.0.38current
remoteAuthFailTrap
NOTIFICATION-TYPE
The login authentication is failed by the remote server
1.3.6.1.4.1.8691.7.69.0.39current