MIBs Depot

MOBANetClocksV2-MIB

Registered at
1.3.6.1.4.1.13842
Last updated
2014-06-17 12:02
Organization
Moser-Baer AG
Revisions
2014-06-17 12:02
Namespace
moser-baer
Source file
MOBANetClocksV2-MIB
Digest
sha256:3806928947580616e36e4206a6b995eabb66f0c08c55b0201df622d199ed2de7

Description

This mib definition is used for all MOBATime network slave clocks.

Contact

Moser-Baer AG Spitalstr. 7 3454 Sumiswald support@mobatime.com

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

MOBANetClocksV2-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
MOBAAlarm64
TEXTUAL-CONVENTION
The alarm list is an array of bytes. The first byte defines the mask for the alarm bits 0..7. The last byte defines the mask for the alarm bits 56..63. Every byte has the range 0 ... 255 (binary).
current
MOBAFlags64
TEXTUAL-CONVENTION
The flags are an array of bytes. The first byte defines the mask for the status bits 0..7. The last byte defines the mask for the status bits 56..63. Every byte has the range 0 ... 255 (binary).
current
MOBANetworkName
TEXTUAL-CONVENTION
Fully qualified domain names or IP addresses in ASCII. IPv4 xxx.xxx.xxx.xxx IPV6 xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx name string max 40 chars
current

Objects

NameOIDSyntaxAccessStatus
mobatime
OBJECT-IDENTITY
1.3.6.1.4.1.13842
mobaNetClocks
OBJECT-IDENTITY
1.3.6.1.4.1.13842.6
mobaNetClocksV2
OBJECT-IDENTITY
1.3.6.1.4.1.13842.6.2
mbnscNet
OBJECT-IDENTITY
1.3.6.1.4.1.13842.6.2.1
mbnscNetGen
OBJECT-IDENTITY
1.3.6.1.4.1.13842.6.2.1.1
mbnscNetGenMAC
OBJECT-TYPE
MAC-Address (xx xx xx xx xx xx)
1.3.6.1.4.1.13842.6.2.1.1.1OCTET STRING (SIZE(6))read-onlycurrent
mbnscNetGenIPMode
OBJECT-TYPE
IP Mode: 0: IPv4 and IPv6 1: IPv4 only 2: IPv6 only
1.3.6.1.4.1.13842.6.2.1.1.2INTEGER {both(0), ipv4only(1), ipv6only(2)}read-writecurrent
mbnscNetGenIPNameserver
OBJECT-TYPE
IPv4 or IPv6 address (xxx.xxx.xxx.xxx or xxxx::xxxx:xxxx) of the nameserver
1.3.6.1.4.1.13842.6.2.1.1.3DisplayString (SIZE(1..40))read-writecurrent
mbnscNetGenTZClientPort
OBJECT-TYPE
Timezone client port. Default 65534
1.3.6.1.4.1.13842.6.2.1.1.4Unsigned32 (1..65535)read-writecurrent
mbnscNetGenConfigPort
OBJECT-TYPE
Configuration port. Default 65532
1.3.6.1.4.1.13842.6.2.1.1.5Unsigned32 (1..65535)read-writecurrent
mbnscNetGenSnmpMode
OBJECT-TYPE
SNMP mode disabled 0: SNMP enabled (default) 1: SNMP disabled
1.3.6.1.4.1.13842.6.2.1.1.6Unsigned32 (0..1)read-onlycurrent
mbnscNetGenMulticastMode
OBJECT-TYPE
Multicast mode disabled 0: Multicast enabled (default) 1: Multicast disabled
1.3.6.1.4.1.13842.6.2.1.1.7Unsigned32 (0..1)read-writecurrent
mbnscNetGenHostname
OBJECT-TYPE
Host name of the device
1.3.6.1.4.1.13842.6.2.1.1.8DisplayString (SIZE(1..20))read-writecurrent
mbnscNetGenCommMode
OBJECT-TYPE
Communication / synchronisation mode 0=unicast 1=multicast (only for digital clocks)
1.3.6.1.4.1.13842.6.2.1.1.9Unsigned32 (0..1)read-onlycurrent
mbnscNetGenMCastGrpIP
OBJECT-TYPE
IP network address (xxx.xxx.xxx.xxx) of the multicast group IP e.g. 239.192.54.1 (only for digital clocks)
1.3.6.1.4.1.13842.6.2.1.1.10IpAddressread-writecurrent
mbnscNetGenConfigCmd
OBJECT-TYPE
Network configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
1.3.6.1.4.1.13842.6.2.1.1.100Unsigned32 (0..2)read-writecurrent
mbnscNetGenConfigChangedTime
OBJECT-TYPE
Time of the last configuration change.
1.3.6.1.4.1.13842.6.2.1.1.101TimeTicksread-onlycurrent
mbnscNetIPv4
OBJECT-IDENTITY
1.3.6.1.4.1.13842.6.2.1.2
mbnscNetIPv4Addr
OBJECT-TYPE
IP network address (xxx.xxx.xxx.xxx) of the network slave clock
1.3.6.1.4.1.13842.6.2.1.2.1IpAddressread-writecurrent
mbnscNetIPv4Mask
OBJECT-TYPE
IP subnet mask (xxx.xxx.xxx.xxx)
1.3.6.1.4.1.13842.6.2.1.2.2IpAddressread-writecurrent
mbnscNetIPv4Gateway
OBJECT-TYPE
IP network address (xxx.xxx.xxx.xxx) for the gateway
1.3.6.1.4.1.13842.6.2.1.2.3IpAddressread-writecurrent
mbnscNetIPv4DHCPMode
OBJECT-TYPE
DHCP mode 0: DHCP disabled 1: DHCP enabled (default)
1.3.6.1.4.1.13842.6.2.1.2.4Unsigned32 (0..1)read-writecurrent
mbnscNetIPv4ConfigCmd
OBJECT-TYPE
Network configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
1.3.6.1.4.1.13842.6.2.1.2.100Unsigned32 (0..2)read-writecurrent
mbnscNetIPv4ConfigChangedTime
OBJECT-TYPE
Time of the last configuration change.
1.3.6.1.4.1.13842.6.2.1.2.101TimeTicksread-onlycurrent
mbnscNetIPv6
OBJECT-IDENTITY
1.3.6.1.4.1.13842.6.2.1.3
mbnscNetIPv6AddrLocal
OBJECT-TYPE
IP V6 link local network address (xxxx:xxxx::xxxx)
1.3.6.1.4.1.13842.6.2.1.3.1DisplayString (SIZE(1..40))read-onlycurrent
mbnscNetIPv6AddrAuto
OBJECT-TYPE
IP V6 network address by autoconfig (xxxx:xxxx::xxxx)
1.3.6.1.4.1.13842.6.2.1.3.2DisplayString (SIZE(1..40))read-onlycurrent
mbnscNetIPv6AddrDHCP
OBJECT-TYPE
IP V6 network address by DHCPv6 (xxxx:xxxx::xxxx)
1.3.6.1.4.1.13842.6.2.1.3.3DisplayString (SIZE(1..40))read-onlycurrent
mbnscNetIPv6AddrFix
OBJECT-TYPE
IP V6 network address manual set (xxxx:xxxx::xxxx)
1.3.6.1.4.1.13842.6.2.1.3.4MOBANetworkName (SIZE(40))read-writecurrent
mbnscNetIPv6Prefix
OBJECT-TYPE
IPv6 subnet prefix for manual set IP address
1.3.6.1.4.1.13842.6.2.1.3.5Unsigned32 (0..128)read-writecurrent
mbnscNetIPv6Gateway
OBJECT-TYPE
IP V6 network address of gateway (next hop) (xxxx:xxxx::xxxx)
1.3.6.1.4.1.13842.6.2.1.3.6DisplayString (SIZE(1..40))read-onlycurrent
mbnscNetIPv6Config
OBJECT-TYPE
Mode of IPv6 adress configuration 0: auto and fixed 1: autoconfig only 2: DHCPv6 only 3: none
1.3.6.1.4.1.13842.6.2.1.3.7INTEGER {both(0), autoonly(1), dhcpv6only(2), none(3)}read-writecurrent
mbnscNetIPv6ConfigCmd
OBJECT-TYPE
Network configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
1.3.6.1.4.1.13842.6.2.1.3.100Unsigned32 (0..2)read-writecurrent
mbnscNetIPv6ConfigChangedTime
OBJECT-TYPE
Time of the last configuration change.
1.3.6.1.4.1.13842.6.2.1.3.101TimeTicksread-onlycurrent
mbnscTime
OBJECT-IDENTITY
1.3.6.1.4.1.13842.6.2.2
mbnscTimeNTP1
OBJECT-TYPE
String with IPv4 or IPv6 address (192.168.3.4 or FD03:2345:2345:2345::231) or DNS name to get NTP time information.
1.3.6.1.4.1.13842.6.2.2.1DisplayString (SIZE(1..40))read-writecurrent
mbnscTimeNTP2
OBJECT-TYPE
String with IPv4 or IPv6 address (192.168.3.4 or FD03:2345:2345:2345::231) or DNS name to get NTP time information.
1.3.6.1.4.1.13842.6.2.2.2DisplayString (SIZE(1..40))read-writecurrent
mbnscTimeNTP3
OBJECT-TYPE
String with IPv4 or IPv6 address (192.168.3.4 or FD03:2345:2345:2345::231) or DNS name to get NTP time information.
1.3.6.1.4.1.13842.6.2.2.3DisplayString (SIZE(1..40))read-writecurrent
mbnscTimeNTP4
OBJECT-TYPE
String with IPv4 or IPv6 address (192.168.3.4 or FD03:2345:2345:2345::231) or DNS name to get NTP time information.
1.3.6.1.4.1.13842.6.2.2.4DisplayString (SIZE(1..40))read-writecurrent
mbnscTimeNTPcurrent
OBJECT-TYPE
IPv4 or IPv6 address of current NTP server
1.3.6.1.4.1.13842.6.2.2.5DisplayString (SIZE(1..40))read-onlycurrent
mbnscTimeNTPpollIntervall
OBJECT-TYPE
NTP request intervall 10..999sec
1.3.6.1.4.1.13842.6.2.2.6Unsigned32 (10..999)read-writecurrent
mbnscTimeDeviceTime
OBJECT-TYPE
Actual device time (UTC). Seconds since 1.1.1970 00:00:00
1.3.6.1.4.1.13842.6.2.2.7Unsigned32read-onlycurrent
mbnscTimeLocOffset
OBJECT-TYPE
Offset to localt time in minutes (-720..720)
1.3.6.1.4.1.13842.6.2.2.8Integer32 (-720..720)read-onlycurrent
mbnscTimeLastReception
OBJECT-TYPE
Last received time (UTC). Seconds since 1.1.1970 00:00:00
1.3.6.1.4.1.13842.6.2.2.9Unsigned32read-onlycurrent
mbnscTimeConfigCmd
OBJECT-TYPE
Time configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
1.3.6.1.4.1.13842.6.2.2.100Unsigned32 (0..2)read-writecurrent
mbnscTimeConfigChangedTime
OBJECT-TYPE
Time of the last configuration change.
1.3.6.1.4.1.13842.6.2.2.101TimeTicksread-onlycurrent
mbnscTimeZone
OBJECT-IDENTITY
1.3.6.1.4.1.13842.6.2.3
mbnscTimeZoneVersion
OBJECT-TYPE
Actual version internal time zone table
1.3.6.1.4.1.13842.6.2.3.1Integer32 (1..255)read-onlycurrent
mbnscTimeZoneNumber
OBJECT-TYPE
Time zone 0: UTC 1..64: See user manual, time zone table 65..128: user defined time zone 129..143: time zone server 1..15 254: automatic time zone - e.g. UTC 255: internal user defined time zone (SET only used for digital clocks)
1.3.6.1.4.1.13842.6.2.3.2Integer32 (0..255)read-writecurrent
mbnscTimeZoneEntry1
OBJECT-TYPE
Time Zone entry -> see special definition
1.3.6.1.4.1.13842.6.2.3.3OCTET STRING (SIZE(18))read-onlycurrent
mbnscTimeZoneEntry2
OBJECT-TYPE
Time Zone entry -> see special definition
1.3.6.1.4.1.13842.6.2.3.4OCTET STRING (SIZE(18))read-onlycurrent
mbnscTimeZoneEntry3
OBJECT-TYPE
Time Zone entry -> see special definition
1.3.6.1.4.1.13842.6.2.3.5OCTET STRING (SIZE(18))read-onlycurrent
mbnscTimeZoneEntry4
OBJECT-TYPE
Time Zone entry -> see special definition
1.3.6.1.4.1.13842.6.2.3.6OCTET STRING (SIZE(18))read-onlycurrent
mbnscTimeZoneEntry5
OBJECT-TYPE
Time Zone entry -> see special definition
1.3.6.1.4.1.13842.6.2.3.7OCTET STRING (SIZE(18))read-onlycurrent
mbnscTimeZoneEntry6
OBJECT-TYPE
Time Zone entry -> see special definition
1.3.6.1.4.1.13842.6.2.3.8OCTET STRING (SIZE(18))read-onlycurrent
mbnscTimeZoneEntry7
OBJECT-TYPE
Time Zone entry -> see special definition
1.3.6.1.4.1.13842.6.2.3.9OCTET STRING (SIZE(18))read-onlycurrent
mbnscTimeZoneConfigCmd
OBJECT-TYPE
Time zone configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
1.3.6.1.4.1.13842.6.2.3.100Unsigned32 (0..2)read-writecurrent
mbnscTimeZoneConfigChangedTime
OBJECT-TYPE
Time of the last configuration change.
1.3.6.1.4.1.13842.6.2.3.101TimeTicksread-onlycurrent
mbnscMode
OBJECT-IDENTITY
1.3.6.1.4.1.13842.6.2.4
mbnscModeSwitchInfo
OBJECT-TYPE
Current switch settings (only analogue movements)
1.3.6.1.4.1.13842.6.2.4.1Integer32read-onlycurrent
mbnscModeDisplayBrightness
OBJECT-TYPE
Display brightness for digital clocks 1..30, A (Auto)
1.3.6.1.4.1.13842.6.2.4.2DisplayString (SIZE(0..2))read-writecurrent
mbnscModeDisplayFormat
OBJECT-TYPE
Display format 12h/24h for digital clocks
1.3.6.1.4.1.13842.6.2.4.3DisplayString (SIZE(0..2))read-writecurrent
mbnscModeDisplayAlternate
OBJECT-TYPE
Display alternating mode for digital clocks 1: time continuously 2: date cont. 3: temperature cont. (sequence 6 sec. time, 3 sec. date for ECO-DC) 4: stopwatch cont. (only DC clock) 5: sequence 6 sec. time, 3 sec. date (only DC clock) 6: sequence 8 sec. time, 3 sec. date, 3 sec. temperature (only DC clock)
1.3.6.1.4.1.13842.6.2.4.4DisplayString (SIZE(0..2))read-writecurrent
mbnscModeNTP
OBJECT-TYPE
NTP synchronisation mode for digital clocks
1.3.6.1.4.1.13842.6.2.4.5DisplayString (SIZE(0..2))not-accessibleobsolete
mbnscModeIRlock
OBJECT-TYPE
IR autolock time for digital clocks (only DC clock) 1..60, U (autolock off)
1.3.6.1.4.1.13842.6.2.4.6DisplayString (SIZE(0..2))read-writecurrent
mbnscModeTimeDispZeros
OBJECT-TYPE
Leading zeros time display for digital clocks (only DC clock) 1: time with leading zero 2: time without leading zero
1.3.6.1.4.1.13842.6.2.4.7DisplayString (SIZE(0..2))read-writecurrent
mbnscModeDateDispZeros
OBJECT-TYPE
Leading zeros date display for digital clocks (only DC clock) 1: date with leading zero 2: date without leading zero
1.3.6.1.4.1.13842.6.2.4.8DisplayString (SIZE(0..2))read-writecurrent
mbnscModeTempUnit
OBJECT-TYPE
Temperature unit for digital clocks (only DC clock) C: Celsius F: Fahrenheit
1.3.6.1.4.1.13842.6.2.4.9DisplayString (SIZE(0..2))read-writecurrent
mbnscModeClockOpMode
OBJECT-TYPE
Operation mode for digital clocks (only DC clock) 0: normal mode 1: special mode 1 2: special mode 2
1.3.6.1.4.1.13842.6.2.4.10DisplayString (SIZE(0..2))read-writecurrent
mbnscModeNWParam
OBJECT-TYPE
Network parameter setting mode for digital clocks
1.3.6.1.4.1.13842.6.2.4.11DisplayString (SIZE(0..2))not-accessibleobsolete
mbnscModeDispDerating
OBJECT-TYPE
Display current deration setting for digital clocks (see service menu definition)
1.3.6.1.4.1.13842.6.2.4.12DisplayString (SIZE(0..2))read-writecurrent
mbnscModeLightCorr
OBJECT-TYPE
Light measurement correction for digital clocks (see service menu definition)
1.3.6.1.4.1.13842.6.2.4.13DisplayString (SIZE(0..2))read-writecurrent
mbnscAdditionalDigitalClockModes
OBJECT-IDENTITY
1.3.6.1.4.1.13842.6.2.4.30
mbnscSensors
OBJECT-IDENTITY
1.3.6.1.4.1.13842.6.2.4.30.1
mbnscSensorsTempActivation
OBJECT-TYPE
Temperature sensor activation 1: DS18B20 3: TME (only sensor 1) 4: TME (Sensors 1 and 2)
1.3.6.1.4.1.13842.6.2.4.30.1.1DisplayString (SIZE(0..2))read-writecurrent
mbnscSensorsTemp1IPAddr
OBJECT-TYPE
IP network address (xxx.xxx.xxx.xxx) of the sensor 1 (SET only used for digital clocks)
1.3.6.1.4.1.13842.6.2.4.30.1.2IpAddressread-writecurrent
mbnscSensorsTemp2IPAddr
OBJECT-TYPE
IP network address (xxx.xxx.xxx.xxx) of the sensor 2 (SET only used for digital clocks)
1.3.6.1.4.1.13842.6.2.4.30.1.3IpAddressread-writecurrent
mbnscSensorsConfigCmd
OBJECT-TYPE
Mode configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
1.3.6.1.4.1.13842.6.2.4.30.1.100Unsigned32 (0..2)read-writecurrent
mbnscSensorsConfigChangedTime
OBJECT-TYPE
Time of the last configuration change.
1.3.6.1.4.1.13842.6.2.4.30.1.101TimeTicksread-onlycurrent
mbnscDA
OBJECT-IDENTITY
1.3.6.1.4.1.13842.6.2.4.30.2
mbnscDASecondCircleDisplay
OBJECT-TYPE
The second circle display mode 1: Accumulating ring of seconds marker 2: Take actual second from full shining circle step by step 3: Full shining circle, actual second off 4: Three shining seconds, the first is showing actual second 5: Two shining seconds, the first is showing actual second
1.3.6.1.4.1.13842.6.2.4.30.2.1DisplayString (SIZE(0..2))read-writecurrent
mbnscDAConfigCmd
OBJECT-TYPE
Mode configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
1.3.6.1.4.1.13842.6.2.4.30.2.100Unsigned32 (0..2)read-writecurrent
mbnscDAConfigChangedTime
OBJECT-TYPE
Time of the last configuration change.
1.3.6.1.4.1.13842.6.2.4.30.2.101TimeTicksread-onlycurrent
mbnscDK
OBJECT-IDENTITY
1.3.6.1.4.1.13842.6.2.4.30.3
mbnscDKFirstLanguage
OBJECT-TYPE
First language selection 1: Czech 2: Slovak 3: English 4: German 5: ... (see manual for full language list)
1.3.6.1.4.1.13842.6.2.4.30.3.1DisplayString (SIZE(0..2))read-writecurrent
mbnscDKSecondLanguage
OBJECT-TYPE
Second language selection 1: Czech 2: Slovak 3: English 4: German 5: ... (see manual for full language list)
1.3.6.1.4.1.13842.6.2.4.30.3.2DisplayString (SIZE(0..2))read-writecurrent
mbnscDKThirdLanguage
OBJECT-TYPE
Third language selection 1: Czech 2: Slovak 3: English 4: German 5: ... (see manual for full language list)
1.3.6.1.4.1.13842.6.2.4.30.3.3DisplayString (SIZE(0..2))read-writecurrent
mbnscDKTempUnitSecondLang
OBJECT-TYPE
Temperature units for second selected language C: Celsius F: Fahrenheit
1.3.6.1.4.1.13842.6.2.4.30.3.4DisplayString (SIZE(0..2))read-writecurrent
mbnscDKTempUnitThirdLang
OBJECT-TYPE
Temperature units for third selected language C: Celsius F: Fahrenheit
1.3.6.1.4.1.13842.6.2.4.30.3.5DisplayString (SIZE(0..2))read-writecurrent
mbnscDKAutoLangSwitchOver
OBJECT-TYPE
Language switch mode for automatic language switching over in one display alternating cycle A: all languages S: simple language
1.3.6.1.4.1.13842.6.2.4.30.3.6DisplayString (SIZE(0..2))read-writecurrent
mbnscDKNumOfCharsForWeekday
OBJECT-TYPE
Number of characters used for weekday names 2: two characters 3: three characters
1.3.6.1.4.1.13842.6.2.4.30.3.7DisplayString (SIZE(0..2))read-writecurrent
mbnscDKNamesFormatDisplay
OBJECT-TYPE
Weekday and month display format 1: first capital 2: all capitals
1.3.6.1.4.1.13842.6.2.4.30.3.8DisplayString (SIZE(0..2))read-writecurrent
mbnscDKTemp1DescriptEnable
OBJECT-TYPE
Display of description for first measured temperature N/Y
1.3.6.1.4.1.13842.6.2.4.30.3.9DisplayString (SIZE(0..2))read-writecurrent
mbnscDKTemp1Description
OBJECT-TYPE
Description text for first measured temperature
1.3.6.1.4.1.13842.6.2.4.30.3.10DisplayString (SIZE(1..5))read-writecurrent
mbnscDKTemp2DescriptEnable
OBJECT-TYPE
Display of description for second measured temperature N/Y
1.3.6.1.4.1.13842.6.2.4.30.3.11DisplayString (SIZE(0..2))read-writecurrent
mbnscDKTemp2Description
OBJECT-TYPE
Description text for second measured temperature
1.3.6.1.4.1.13842.6.2.4.30.3.12DisplayString (SIZE(1..5))read-writecurrent
mbnscDKWorldTimeZone1
OBJECT-TYPE
Index of time zone for world time zone 1 0: UTC 1..64: See user manual, time zone table 65..128: user defined time zone 129..143: time zone server 1..15 255: none (SET only used for digital clocks)
1.3.6.1.4.1.13842.6.2.4.30.3.13Integer32 (0..255)read-writecurrent
mbnscDKWorldTimeZone1Description
OBJECT-TYPE
Description text for World time zone 1
1.3.6.1.4.1.13842.6.2.4.30.3.14DisplayString (SIZE(1..8))read-writecurrent
mbnscDKWorldTimeZone2
OBJECT-TYPE
Index of time zone for world time zone 2 0: UTC 1..64: See user manual, time zone table 65..128: user defined time zone 129..143: time zone server 1..15 255: none (SET only used for digital clocks)
1.3.6.1.4.1.13842.6.2.4.30.3.15Integer32 (0..255)read-writecurrent
mbnscDKWorldTimeZone2Description
OBJECT-TYPE
Description text for World time zone 2
1.3.6.1.4.1.13842.6.2.4.30.3.16DisplayString (SIZE(1..8))read-writecurrent
mbnscDKWorldTimeZone3
OBJECT-TYPE
Index of time zone for world time zone 3 0: UTC 1..64: See user manual, time zone table 65..128: user defined time zone 129..143: time zone server 1..15 255: none (SET only used for digital clocks)
1.3.6.1.4.1.13842.6.2.4.30.3.17Integer32 (0..255)read-writecurrent
mbnscDKWorldTimeZone3Description
OBJECT-TYPE
Description text for World time zone 3
1.3.6.1.4.1.13842.6.2.4.30.3.18DisplayString (SIZE(1..8))read-writecurrent
mbnscDKWorldTimeZone4
OBJECT-TYPE
Index of time zone for world time zone 4 0: UTC 1..64: See user manual, time zone table 65..128: user defined time zone 129..143: time zone server 1..15 255: none (SET only used for digital clocks)
1.3.6.1.4.1.13842.6.2.4.30.3.19Integer32 (0..255)read-writecurrent
mbnscDKWorldTimeZone4Description
OBJECT-TYPE
Description text for World time zone 4
1.3.6.1.4.1.13842.6.2.4.30.3.20DisplayString (SIZE(1..8))read-writecurrent
mbnscDKWorldTimeZone5
OBJECT-TYPE
Index of time zone for world time zone 5 0: UTC 1..64: See user manual, time zone table 65..128: user defined time zone 129..143: time zone server 1..15 255: none (SET only used for digital clocks)
1.3.6.1.4.1.13842.6.2.4.30.3.21Integer32 (0..255)read-writecurrent
mbnscDKWorldTimeZone5Description
OBJECT-TYPE
Description text for World time zone 5
1.3.6.1.4.1.13842.6.2.4.30.3.22DisplayString (SIZE(1..8))read-writecurrent
mbnscDKAutoTimeZoneSwitchOver
OBJECT-TYPE
World time switch mode for automatic time zone switching over in one display alternating cycle A: all world time zones S: simple world time zone
1.3.6.1.4.1.13842.6.2.4.30.3.23DisplayString (SIZE(0..2))read-writecurrent
mbnscDKConfigCmd
OBJECT-TYPE
Mode configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
1.3.6.1.4.1.13842.6.2.4.30.3.100Unsigned32 (0..2)read-writecurrent
mbnscDKConfigChangedTime
OBJECT-TYPE
Time of the last configuration change.
1.3.6.1.4.1.13842.6.2.4.30.3.101TimeTicksread-onlycurrent
mbnscAdditionalInterfaceModes
OBJECT-IDENTITY
1.3.6.1.4.1.13842.6.2.4.40
mbnscNMI
OBJECT-IDENTITY
1.3.6.1.4.1.13842.6.2.4.40.1
mbnscNMIDCFCurrentLoop
OBJECT-TYPE
Operation mode of the DCF77 current loop. 0: OFF 1: ON
1.3.6.1.4.1.13842.6.2.4.40.1.1INTEGER {off(0), on(1)}read-writecurrent
mbnscNMILineDriver
OBJECT-TYPE
Operation mode of the line driver. 0: OFF 1: MOBALine 2: Active DCF
1.3.6.1.4.1.13842.6.2.4.40.1.2INTEGER {off(0), mobaline(1), activdcf(2)}read-writecurrent
mbnscNMIMOBALineMode
OBJECT-TYPE
Operation mode of MOBALine. 0: normal operation 1: 12:00 mode, sideclocks shows 12:00 position 2: clock-id mode, sideclocks shows their ids if configured
1.3.6.1.4.1.13842.6.2.4.40.1.3INTEGER {normal(0), command12h(1), clockidcommand(2)}read-writecurrent
mbnscNMIMOBALineMinuteHandMode
OBJECT-TYPE
Minute hand mode operation of MOBALine. 0: minute step mode 1: half minute step mode 2: continuous mode
1.3.6.1.4.1.13842.6.2.4.40.1.4INTEGER {minutestep(0), halfminutestep(1), continuous(2)}read-writecurrent
mbnscNMIActiveDCFMode
OBJECT-TYPE
Operation mode of Active DCF. 1: Mode 1 2: Mode 2 3: Mode 3 4: Mode 4 5: Mode 5 6: Mode 6
1.3.6.1.4.1.13842.6.2.4.40.1.5INTEGER {mode1(1), mode2(2), mode3(3), mode4(4), mode5(5), mode6(6)}read-writecurrent
mbnscNMISideClockState
OBJECT-IDENTITY
1.3.6.1.4.1.13842.6.2.4.40.1.20
mbnscNMISideClock1
OBJECT-TYPE
State of side clock 1 0: Clock not configured 3: Clock OK 5: Clock error
1.3.6.1.4.1.13842.6.2.4.40.1.20.1INTEGER {notconfigured(0), clockok(3), clockerror(5)}read-onlycurrent
mbnscNMISideClock2
OBJECT-TYPE
State of side clock 2 0: Clock not configured 3: Clock OK 5: Clock error
1.3.6.1.4.1.13842.6.2.4.40.1.20.2INTEGER {notconfigured(0), clockok(3), clockerror(5)}read-onlycurrent
mbnscNMISideClock3
OBJECT-TYPE
State of side clock 3 0: Clock not configured 3: Clock OK 5: Clock error
1.3.6.1.4.1.13842.6.2.4.40.1.20.3INTEGER {notconfigured(0), clockok(3), clockerror(5)}read-onlycurrent
mbnscNMISideClock4
OBJECT-TYPE
State of side clock 4 0: Clock not configured 3: Clock OK 5: Clock error
1.3.6.1.4.1.13842.6.2.4.40.1.20.4INTEGER {notconfigured(0), clockok(3), clockerror(5)}read-onlycurrent
mbnscNMISideClock5
OBJECT-TYPE
State of side clock 5 0: Clock not configured 3: Clock OK 5: Clock error
1.3.6.1.4.1.13842.6.2.4.40.1.20.5INTEGER {notconfigured(0), clockok(3), clockerror(5)}read-onlycurrent
mbnscNMISideClock6
OBJECT-TYPE
State of side clock 6 0: Clock not configured 3: Clock OK 5: Clock error
1.3.6.1.4.1.13842.6.2.4.40.1.20.6INTEGER {notconfigured(0), clockok(3), clockerror(5)}read-onlycurrent
mbnscNMISideClock7
OBJECT-TYPE
State of side clock 7 0: Clock not configured 3: Clock OK 5: Clock error
1.3.6.1.4.1.13842.6.2.4.40.1.20.7INTEGER {notconfigured(0), clockok(3), clockerror(5)}read-onlycurrent
mbnscNMISideClock8
OBJECT-TYPE
State of side clock 8 0: Clock not configured 3: Clock OK 5: Clock error
1.3.6.1.4.1.13842.6.2.4.40.1.20.8INTEGER {notconfigured(0), clockok(3), clockerror(5)}read-onlycurrent
mbnscNMISideClock9
OBJECT-TYPE
State of side clock 9 0: Clock not configured 3: Clock OK 5: Clock error
1.3.6.1.4.1.13842.6.2.4.40.1.20.9INTEGER {notconfigured(0), clockok(3), clockerror(5)}read-onlycurrent
mbnscNMISideClock10
OBJECT-TYPE
State of side clock 10 0: Clock not configured 3: Clock OK 5: Clock error
1.3.6.1.4.1.13842.6.2.4.40.1.20.10INTEGER {notconfigured(0), clockok(3), clockerror(5)}read-onlycurrent
mbnscNMISideClock11
OBJECT-TYPE
State of side clock 11 0: Clock not configured 3: Clock OK 5: Clock error
1.3.6.1.4.1.13842.6.2.4.40.1.20.11INTEGER {notconfigured(0), clockok(3), clockerror(5)}read-onlycurrent
mbnscNMISideClock12
OBJECT-TYPE
State of side clock 12 0: Clock not configured 3: Clock OK 5: Clock error
1.3.6.1.4.1.13842.6.2.4.40.1.20.12INTEGER {notconfigured(0), clockok(3), clockerror(5)}read-onlycurrent
mbnscNMIConfigCmd
OBJECT-TYPE
General configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
1.3.6.1.4.1.13842.6.2.4.40.1.100Unsigned32 (0..2)read-writecurrent
mbnscNMIConfigChangedTime
OBJECT-TYPE
Time of the last configuration change.
1.3.6.1.4.1.13842.6.2.4.40.1.101TimeTicksread-onlycurrent
mbnscModeConfigCmd
OBJECT-TYPE
Mode configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
1.3.6.1.4.1.13842.6.2.4.100Unsigned32 (0..2)read-writecurrent
mbnscModeConfigChangedTime
OBJECT-TYPE
Time of the last configuration change.
1.3.6.1.4.1.13842.6.2.4.101TimeTicksread-onlycurrent
mbnscGeneral
OBJECT-IDENTITY
1.3.6.1.4.1.13842.6.2.5
mbnscGeneralType
OBJECT-TYPE
Network slave clock type 1 Network Clock Interface NCI 2 Wireless Time Distribution WTD 868-T 3 NTP movement SEN 00 4 NTP movement NBU 190 5 Digital Clock ECO-DC 6 Digital Clock DC3 7 NTP movement SEN 40 8 NTP movement SAN 40 9 NTP digital clock DA 10 NTP calendar digital clock DK2 11 Network MOBALine Interface NMI 12 NTP clock TREND 13 NTP clock TREND double sided 14 NTP in- and outdoor digital clock DSC
1.3.6.1.4.1.13842.6.2.5.1Integer32 (1..14)read-onlycurrent
mbnscGeneralName
OBJECT-TYPE
Device name (identifier)
1.3.6.1.4.1.13842.6.2.5.2DisplayString (SIZE(0..20))read-writecurrent
mbnscGeneralFirmwareNumber
OBJECT-TYPE
Article number of the firmware.
1.3.6.1.4.1.13842.6.2.5.3DisplayString (SIZE(6))read-onlycurrent
mbnscGeneralFirmwareVer
OBJECT-TYPE
Firmware version.
1.3.6.1.4.1.13842.6.2.5.4DisplayString (SIZE(4))read-onlycurrent
mbnscGeneralStatus
OBJECT-TYPE
Network slave clock status (64bit). Internal state of the network slave clock. Used for maintenance only. Bit 00 : time ok Bit 01 : 12h position Bit 02 : Reserved Bit 03 : Reserved Bit 04 : Reserved Bit 05 : Reserved Bit 06 : Reserved Bit 07 : Reserved Bit 08 : Reserved Bit 09 : Reserved Bit 10 : Reserved Bit 11 : Reserved Bit 12 : Reserved Bit 13 : Reserved Bit 14 : Reserved Bit 15 : Reserved Bit 16 : Reserved Bit 17 : Reserved Bit 18 : Reserved Bit 19 : Reserved Bit 20 : Reserved Bit 21 : Reserved Bit 22 : Reserved Bit 23 : Reserved Bit 24 : Reserved Bit 25 : Reserved Bit 26 : Reserved Bit 27 : Reserved Bit 28 : Reserved Bit 29 : Reserved Bit 30 : Reserved Bit 31 : Reserved Bit32..63 not used
1.3.6.1.4.1.13842.6.2.5.5MOBAFlags64read-onlycurrent
mbnscGeneralAlarms
OBJECT-TYPE
Alarm state of the network slave clock Bit00=Synchronization Bit01=Power supply Bit02=Slave (cascade) Bit03=Illumination Bit04=Hands position (sec) Bit05=Hands position (m/h) Bit06=Restart Bit07=CommError Bit08=Time zone Bit09=Reserved Bit10=Reserved Bit11=Reserved Bit12=Reserved Bit13=Reserved Bit14=Reserved Bit15=Reserved Bit16=Reserved Bit17=Reserved Bit18=Reserved Bit19=Reserved Bit20=Reserved Bit21=Reserved Bit22=Reserved Bit23=Reserved Bit24=Reserved Bit25=Reserved Bit26=Reserved Bit27=Reserved Bit28=Reserved Bit29=Reserved Bit30=Reserved Bit31=Reserved Bit32..Bit63=Device type specific error
1.3.6.1.4.1.13842.6.2.5.6MOBAAlarm64read-onlycurrent
mbnscGeneralSlaveInfo1
OBJECT-TYPE
Info from slave 1 Byte 0..5 MAC Byte 6..11 Slave local time Byte 12..17 SW-number Byte 18..21 SW-version Byte 22 state Byte 23 reserved Byte 24 error Byte 25 reserved
1.3.6.1.4.1.13842.6.2.5.7OCTET STRING (SIZE(26))read-onlycurrent
mbnscGeneralSlaveInfo2
OBJECT-TYPE
Info from slave 2 Byte 0..5 MAC Byte 6..11 Slave local time Byte 12..17 SW-number Byte 18..21 SW-version Byte 22 state Byte 23 reserved Byte 24 error Byte 25 reserved
1.3.6.1.4.1.13842.6.2.5.8OCTET STRING (SIZE(26))read-onlycurrent
mbnscGeneralSlaveInfo3
OBJECT-TYPE
Info from slave 3 Byte 0..5 MAC Byte 6..11 Slave local time Byte 12..17 SW-number Byte 18..21 SW-version Byte 22 state Byte 23 reserved Byte 24 error Byte 25 reserved
1.3.6.1.4.1.13842.6.2.5.9OCTET STRING (SIZE(26))read-onlycurrent
mbnscGeneralConfigCmd
OBJECT-TYPE
General configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
1.3.6.1.4.1.13842.6.2.5.100Unsigned32 (0..2)read-writecurrent
mbnscGeneralConfigChangedTime
OBJECT-TYPE
Time of the last configuration change.
1.3.6.1.4.1.13842.6.2.5.101TimeTicksread-onlycurrent
mbnscSupervision
OBJECT-IDENTITY
1.3.6.1.4.1.13842.6.2.6
mbnscSNMPManager1
OBJECT-TYPE
String with IPv4 or IPv6 address (e.g 192.168.3.4 or FD03:2345:2345:2345::231) of the SNMP manager 1
1.3.6.1.4.1.13842.6.2.6.1DisplayString (SIZE(1..40))read-writecurrent
mbnscSNMPManager2
OBJECT-TYPE
String with IPv4 or IPv6 address (e.g 192.168.3.4 or FD03:2345:2345:2345::231) of the SNMP manager 2
1.3.6.1.4.1.13842.6.2.6.2DisplayString (SIZE(1..40))read-writecurrent
mbnscSNMPTrapAliveMsgInterval
OBJECT-TYPE
Time interval to send the alive message to the trap listener stations. 0: Alive message disabled >0: Alive message enabled Range: 1 ... 1440 minutes
1.3.6.1.4.1.13842.6.2.6.3Unsigned32 (0 | 1..1440)read-writecurrent
mbnscSNMPConfigCmd
OBJECT-TYPE
SNMP / supervision services configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
1.3.6.1.4.1.13842.6.2.6.100Unsigned32 (0..2)read-writecurrent
mbnscSNMPConfigChangedTime
OBJECT-TYPE
Time of the last configuration change.
1.3.6.1.4.1.13842.6.2.6.101TimeTicksread-onlycurrent
mbnscCommand
OBJECT-IDENTITY
1.3.6.1.4.1.13842.6.2.7
mbnscCommand12Pos
OBJECT-TYPE
Mode of the analogue clock: 0=run, 1=12h position
1.3.6.1.4.1.13842.6.2.7.1Unsigned32 (0..1)read-writecurrent
mbnscCommandSWReset
OBJECT-TYPE
Command SW reset if set to 1
1.3.6.1.4.1.13842.6.2.7.2Unsigned32 (0..1)read-writecurrent
mbnscCommandFactorySetting
OBJECT-TYPE
Restore factory settings if set to 1
1.3.6.1.4.1.13842.6.2.7.3Unsigned32 (0..1)read-writecurrent
mbnscCommandFirmwUpd
OBJECT-TYPE
Command to start FW update
1.3.6.1.4.1.13842.6.2.7.4OCTET STRING (SIZE(10))read-onlycurrent
mbnscCommandExtContact
OBJECT-TYPE
Set external contact
1.3.6.1.4.1.13842.6.2.7.5Integer32 (0..1)read-onlycurrent
mbnscCommandConfigCmd
OBJECT-TYPE
SNMP / supervision services configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
1.3.6.1.4.1.13842.6.2.7.100Unsigned32 (0..2)read-writecurrent
mbnscSnmpConfig
OBJECT-IDENTITY
1.3.6.1.4.1.13842.6.2.9
mbnscSnmpCurrentAlarmInfo
OBJECT-IDENTITY
1.3.6.1.4.1.13842.6.2.9.1
mbnscTrapAlMsgErrorNr
OBJECT-TYPE
Error number of the trap message.
1.3.6.1.4.1.13842.6.2.9.1.1Unsigned32 (0..63)accessible-for-notifycurrent
mbnscTrapAlMsgErrorState
OBJECT-TYPE
Error state of the trap message.
1.3.6.1.4.1.13842.6.2.9.1.2Unsigned32 (0..1)accessible-for-notifycurrent
mbnscTrapAlMsgErrorTime
OBJECT-TYPE
Error time of the trap message. Seconds since 1.1.1970 00:00:00
1.3.6.1.4.1.13842.6.2.9.1.3Unsigned32accessible-for-notifycurrent
mbnscTraps
OBJECT-IDENTITY
1.3.6.1.4.1.13842.6.2.10
mbnscMIBCompliance
OBJECT-IDENTITY
1.3.6.1.4.1.13842.6.100.1
mbnscMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.13842.6.100.2

Notifications

NameOIDStatus
mbnscTrapsAlarm
NOTIFICATION-TYPE
Alarm trap with attached (binded variables) alarm information. mbnscTrapAlMsgErrorNr, mbnscTrapAlMsgErrorState, mbnscTrapAlMsgErrorTime
1.3.6.1.4.1.13842.6.2.10.1current
mbnscTrapsAlive
NOTIFICATION-TYPE
Device alive trap. Will be send in the configured interval. Attached are the variables mbnscGeneralStatus and mbnscGeneralAlarms.
1.3.6.1.4.1.13842.6.2.10.2current

Conformance

NameOIDStatus
mbnscMIBCompliances
MODULE-COMPLIANCE
Please replace this text with your description.
1.3.6.1.4.1.13842.6.100.1.1current
mbnscAllNotifications
NOTIFICATION-GROUP
This automatically created notification group contains all notifications that do not belong to any other NOTIFICATION-GROUP
1.3.6.1.4.1.13842.6.100.2.1current
mbnscGrpNBU190
OBJECT-GROUP
All parameters used for NBU 190 movement
1.3.6.1.4.1.13842.6.100.2.2current
mbnscGrpSEN40
OBJECT-GROUP
All parameters used for SEN 40 movement
1.3.6.1.4.1.13842.6.100.2.3current
mbnscGrpDC
OBJECT-GROUP
All parameters used for DC digital clock
1.3.6.1.4.1.13842.6.100.2.4current
mbnscGrpECODC
OBJECT-GROUP
All parameters used for ECO DC digital clock
1.3.6.1.4.1.13842.6.100.2.5current
mbnscGrpDA
OBJECT-GROUP
All parameters used for DA digital clock
1.3.6.1.4.1.13842.6.100.2.6current
mbnscGrpDK
OBJECT-GROUP
All parameters used for DK digital clock
1.3.6.1.4.1.13842.6.100.2.7current
mbnscGrpNMI
OBJECT-GROUP
All parameters used for Network-MOBALine-Interface NMI
1.3.6.1.4.1.13842.6.100.2.8current
mbnscGrpNotUsedParameters
OBJECT-GROUP
All parameters not used in oother groups
1.3.6.1.4.1.13842.6.100.2.100current