MIBs Depot

MITEL-PPPGROUP-MIB

Registered at
1.3.6.1.4.1.1027.4.8.1.2
Last updated
2003-03-24 10:33
Organization
MITEL Corporation
Revisions
2003-03-24 10:33, 1999-03-01 00:00
Namespace
mitel
Source file
MITEL-PPPGROUP-MIB
Digest
sha256:3d7b7e4037a261a644f1187c3d5134b770f69e90d4d2894deb7462da4f6e1fbb

Description

The MITEL PPP MIB module.

Contact

Standards Group, Postal: MITEL Corporation 350 Legget Drive, PO Box 13089 Kanata, Ontario Canada K2K 1X3 Tel: +1 613 592 2122 Fax: +1 613 592 4784 E-mail: std@mitel.com

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

MITEL-PPPGROUP-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
mitel
OBJECT-IDENTITY
1.3.6.1.4.1.1027
mitelProprietary
OBJECT-IDENTITY
1.3.6.1.4.1.1027.4
mitelPropIpNetworking
OBJECT-IDENTITY
1.3.6.1.4.1.1027.4.8
mitelIpNetRouter
OBJECT-IDENTITY
1.3.6.1.4.1.1027.4.8.1
mitelPppGrpGlobalGroup
OBJECT-IDENTITY
1.3.6.1.4.1.1027.4.8.1.2.1
mitelGblGrpNegotiateFirst
OBJECT-TYPE
This attribute defines which PPP authentication protocol is negotiated first on incoming call. DEFAULT = chap
1.3.6.1.4.1.1027.4.8.1.2.1.1INTEGER {chap(1), pap(2), mschap(3)}read-writecurrent
mitelGblGrpDynamicIpAddr
OBJECT-TYPE
This attribute defines the start address of the dynamic addres pool.
1.3.6.1.4.1.1027.4.8.1.2.1.2IpAddressread-writecurrent
mitelGblGrpNumDynamicIpAddr
OBJECT-TYPE
This attribute defines the number of dynamic IP addresses in the pool.
1.3.6.1.4.1.1027.4.8.1.2.1.3INTEGER (0..150)read-writecurrent
mitelGblGrpDynamicIpAdrrHoldoff
OBJECT-TYPE
This attribute defines the time in seconds before the same IP address can be reused after a call has been disconnected.
1.3.6.1.4.1.1027.4.8.1.2.1.4INTEGER (1..300)read-writecurrent
mitelGblGrpRemDnsIpAddrHandling
OBJECT-TYPE
This attribute determines wether the system can accept or override the DNS IP address submitted by a remote system. DEFAULT = accept. Override has been superceded by overridewith.
1.3.6.1.4.1.1027.4.8.1.2.1.5INTEGER {accept(1), override(2), overridewith(3)}read-writecurrent
mitelGblGrpPrimaryWinsServerIpAddr
OBJECT-TYPE
This attribute defines the Primary WINS server IP address of your Network.
1.3.6.1.4.1.1027.4.8.1.2.1.6IpAddressread-writecurrent
mitelGblGrpSecondaryWinsServerIpAddr
OBJECT-TYPE
This attribute defines the Secondary WINS server IP address of your Network.
1.3.6.1.4.1.1027.4.8.1.2.1.7IpAddressread-writecurrent
mitelPppGrpRemoteConfigTable
OBJECT-TYPE
This table contains objects that pertain to the management of remote LANs that use the PPP Internet standard link protocol.
1.3.6.1.4.1.1027.4.8.1.2.2not-accessiblecurrent
mitelPppGrpRemoteConfigEntry
OBJECT-TYPE
A default entry at conceptual row zero does exist in this table. The default entry can be used to specify the PPP authentication protocol only.
1.3.6.1.4.1.1027.4.8.1.2.2.1not-accessiblecurrent
mitelRmtCfgTableIndex
OBJECT-TYPE
This object uniquely identifies this object
1.3.6.1.4.1.1027.4.8.1.2.2.1.1Integer32read-onlycurrent
mitelRmtCfgTableIpAddrHandling
OBJECT-TYPE
This attribute determines wether the system can accept or override the DNS IP address submitted by a remote system. DEFAULT = accept.
1.3.6.1.4.1.1027.4.8.1.2.2.1.2INTEGER {accept(1), override(2), assign(3)}read-writecurrent
mitelRmtCfgTableRemIpAddr
OBJECT-TYPE
The IP address to assign to remote if mitelRmtCfgTableIPAddrHandling is set to assign(3)
1.3.6.1.4.1.1027.4.8.1.2.2.1.3IpAddressread-writecurrent
mitelRmtCfgTableStatus
OBJECT-TYPE
The current status of this entry.
1.3.6.1.4.1.1027.4.8.1.2.2.1.4RowStatusread-createcurrent
mitelRmtCfgTablePppMode
OBJECT-TYPE
The mode PPP will be using for the given destination.
1.3.6.1.4.1.1027.4.8.1.2.2.1.5INTEGER {client(1), server(2)}read-writecurrent
mitelPppGrpPppOverEthernetTable
OBJECT-TYPE
Table containing the configuration items needed by the PPPoE stack.
1.3.6.1.4.1.1027.4.8.1.2.3not-accessiblecurrent
mitelPppGrpPppOverEthernetEntry
OBJECT-TYPE
PPPoE information
1.3.6.1.4.1.1027.4.8.1.2.3.1not-accessiblecurrent
mitelPppOEthTableIndex
OBJECT-TYPE
Unique Identifier for an entry in PPP over Ethernet Table.
1.3.6.1.4.1.1027.4.8.1.2.3.1.1Integer32read-writecurrent
mitelPppOEthTableEnabled
OBJECT-TYPE
Is this PPPoE instance enabled or not.
1.3.6.1.4.1.1027.4.8.1.2.3.1.2INTEGER {disabled(0), enabled(1)}read-writecurrent
mitelPppOEthTablePacketTimeout
OBJECT-TYPE
The time to wait, in seconds, for a valid response to a discovery packet before resending it. Warning: this value is doubled ever time a packet is resent.
1.3.6.1.4.1.1027.4.8.1.2.3.1.3INTEGER (1..5)read-writecurrent
mitelPppOEthTablePacketRetries
OBJECT-TYPE
The number of times to resend discovery packets before giving up on the negotiation.
1.3.6.1.4.1.1027.4.8.1.2.3.1.4INTEGER (1..15)read-writecurrent
mitelPppOEthTableTotalRetries
OBJECT-TYPE
The RFC states that failure to receive a valid PADS packet should restart the negotiation. This count stops the system retrying indefinitely on duff PADS packets by capping the total number of retry attempts.
1.3.6.1.4.1.1027.4.8.1.2.3.1.5INTEGER (1..15)read-writecurrent
mitelPppOEthTableServiceName
OBJECT-TYPE
The service we wish to request from the remote access concentrator. Examples of the use of the service name are to indicate an ISP or a class or quality of service. An empty string indicates any service.
1.3.6.1.4.1.1027.4.8.1.2.3.1.6OCTET STRING (SIZE(0..50))read-writecurrent
mitelPppOEthTableACName
OBJECT-TYPE
Description of the remote access concentrator we wish to connect to. An empty string indicates no preference.
1.3.6.1.4.1.1027.4.8.1.2.3.1.7OCTET STRING (SIZE(0..50))read-writecurrent
mitelPppOEthTableStatus
OBJECT-TYPE
The entry's row status.
1.3.6.1.4.1.1027.4.8.1.2.3.1.8RowStatusread-createcurrent