MIBs Depot

MITEL-IperaVoiceLAN-MIB

Registered at
1.3.6.1.4.1.1027.4.1.1.2
1.3.6.1.4.1.1027.5.1.4
1.3.6.1.4.1.1027.5.2.4.1
1.3.6.1.4.1.1027.5.2.4.2
1.3.6.1.4.1.1027.5.3.3
Namespace
mitel
Source file
MITEL-IperaVoiceLAN-MIB
Digest
sha256:0153008fa807e65c0d0230317356d2704818a3746c38313b92b12b3420a6217d

Imports

FromSymbols
MITEL-MIBmitelAppCallServer, mitelConfAgents, mitelConfCompliances, mitelGrpIpera3000, mitelIdCsIpera3000
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-MIBsysName
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
MITEL-IperaVoiceLAN-MIB
MITEL-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Under this module's arcs

Where the registration tree carries on below this module.

ArcNameModule
1.3.6.1.4.1.1027.4.1.1.2.5mitelIpera3000Applications

Textual conventions

NameOIDSyntaxAccessStatus
DateAndTime
type
MitelIpera3000AlarmLevelType
type
MitelIpera3000ResetCause
type
MitelIpera3000ShutdownCause
type

Objects

NameOIDSyntaxAccessStatus
mitelAppCsIpera3000
OBJECT-IDENTITY
1.3.6.1.4.1.1027.4.1.1.2
mitelIpera3000System
OBJECT-IDENTITY
1.3.6.1.4.1.1027.4.1.1.2.1
mitelIpera3000SysCapDisplay
OBJECT-IDENTITY
1.3.6.1.4.1.1027.4.1.1.2.1.2
mitelIpera3000IPUsrLicPurchased
OBJECT-TYPE
The number of the user license purchased.
1.3.6.1.4.1.1027.4.1.1.2.1.2.1INTEGERread-onlymandatory
mitelIpera3000IPUsrLicUsed
OBJECT-TYPE
The number of the user license used.
1.3.6.1.4.1.1027.4.1.1.2.1.2.2INTEGERread-onlymandatory
mitelIpera3000IPDevLicPurchased
OBJECT-TYPE
The number of the device license purchased.
1.3.6.1.4.1.1027.4.1.1.2.1.2.3INTEGERread-onlymandatory
mitelIpera3000IPDevLicUsed
OBJECT-TYPE
The number of the device license used.
1.3.6.1.4.1.1027.4.1.1.2.1.2.4INTEGERread-onlymandatory
mitelIpera3000CEID
OBJECT-TYPE
The Cluster Element ID is a number to identify a node that is in a cluster. This number is not guaranteed to be unique.
1.3.6.1.4.1.1027.4.1.1.2.1.3DisplayString (SIZE(0..255))read-onlymandatory
mitelIpera3000PNI
OBJECT-TYPE
The Primary Node ID is a number assigned to a cluster of nodes for a dialing plan. Though a good candidate to identify a cluster, it is not unique across a network.
1.3.6.1.4.1.1027.4.1.1.2.1.4DisplayString (SIZE(0..255))read-onlymandatory
mitelIpera3000ClusterName
OBJECT-TYPE
The Cluster Name is a unique name that clearly identifies a cluster. Introduced in 3300 6.0 release.
1.3.6.1.4.1.1027.4.1.1.2.1.5DisplayString (SIZE(0..255))read-onlymandatory
mitelIpera3000Alarms
OBJECT-IDENTITY
1.3.6.1.4.1.1027.4.1.1.2.2
mitelIpera3000AlmLevel
OBJECT-TYPE
The current overall alarm level for the call server.
1.3.6.1.4.1.1027.4.1.1.2.2.1MitelIpera3000AlarmLevelTyperead-onlymandatory
mitelIpera3000AlmDetectDate
OBJECT-TYPE
Defines when the alarm was detected.
1.3.6.1.4.1.1027.4.1.1.2.2.2DateAndTimeread-onlymandatory
mitelIpera3000AlmNbrCategories
OBJECT-TYPE
Defines the number of associated entries in the categories table.
1.3.6.1.4.1.1027.4.1.1.2.2.3INTEGERread-onlymandatory
mitelIpera3000CategoryTable
OBJECT-TYPE
Table defining the alarm state for individual call server categories. There will be multiple categories for each call server. The number of rows in the table is determined by the total of the mitelIpera3000AlmTblNbrCategories value.
1.3.6.1.4.1.1027.4.1.1.2.2.4not-accessiblemandatory
mitelIpera3000CategoryTableEntry
OBJECT-TYPE
A row defining a single category.
1.3.6.1.4.1.1027.4.1.1.2.2.4.1not-accessiblemandatory
mitelIpera3000CatTblIndex
OBJECT-TYPE
Differentiates the different category reports for the call server. The first category will have an index value of 1, the second will have 2, etc. up to the last category report. The highest possible index value is 100.
1.3.6.1.4.1.1027.4.1.1.2.2.4.1.1INTEGER (1..65535)read-onlymandatory
mitelIpera3000CatTblAvailable
OBJECT-TYPE
The number of available resources of this type of category on this call server.
1.3.6.1.4.1.1027.4.1.1.2.2.4.1.2INTEGERread-onlymandatory
mitelIpera3000CatTblUnavailable
OBJECT-TYPE
The number of unavailable resources of this type of category on this call server.
1.3.6.1.4.1.1027.4.1.1.2.2.4.1.3INTEGERread-onlymandatory
mitelIpera3000CatTblLevel
OBJECT-TYPE
Defines the alarm level for this category on this call server.
1.3.6.1.4.1.1027.4.1.1.2.2.4.1.4MitelIpera3000AlarmLevelTyperead-onlymandatory
mitelIpera3000CatTblMinorThresh
OBJECT-TYPE
The percentage unavailable threshold indicating a minor alarm on this call server category.
1.3.6.1.4.1.1027.4.1.1.2.2.4.1.5INTEGERread-onlymandatory
mitelIpera3000CatTblMajorThresh
OBJECT-TYPE
The percentage unavailable threshold indicating a major alarm on this call server category.
1.3.6.1.4.1.1027.4.1.1.2.2.4.1.6INTEGERread-onlymandatory
mitelIpera3000CatTblCriticalThresh
OBJECT-TYPE
The percentage unavailable threshold indicating a critical alarm on this call server category.
1.3.6.1.4.1.1027.4.1.1.2.2.4.1.7INTEGERread-onlymandatory
mitelIpera3000CatTblName
OBJECT-TYPE
The name of this resource category.
1.3.6.1.4.1.1027.4.1.1.2.2.4.1.8DisplayString (SIZE(0..255))read-onlymandatory
mitelIpera3000TrapAlmShutdownCause
OBJECT-TYPE
This value is only useful for the shutdown trap. This scalar is not persistent. A GET on this scalar will always return: shutdownCauseNotReported (11). Defines the last known shutdown cause. This shutdown is the last orderly shutdown of the system. Do not confuse this with the ResetCause. e.g. this value would have no meaning if the shutdown cause was from a power failure, but it does have meaning if the shutdown was due to a scheduled reboot.
1.3.6.1.4.1.1027.4.1.1.2.2.5MitelIpera3000ShutdownCauseread-onlymandatory
mitelIpera3000TrapAlmShutdownDetailedCause
OBJECT-TYPE
The detailed reason for the last shutdown: This value is only useful for the shutdown trap. This scalar is not persistent. A GET on this scalar will always return: shutdownCauseNotReported. resourcesLowShutdown (1), -- System reboot to reclaim resources. softwareComponentFailureShutdown (2), -- System reboot due to a serious software fault. softwareUpgradedShutdown (3), -- System reboot because software was upgraded. databaseRestoreShutdown (4), -- System reboot because a database was restored. intermediateShutdown (5), -- System reboot during startup because of a configuration change. l2SwitchFailureShutdown (6), -- Layer 2 switch shutdown system to restore internal communications. remoteAlarmButtonShutdown (7), -- System reboot because user pressed remote alarm button. softRestart (8), -- System reboot because call control issues a soft restart. callControlProgrammedReboot (9), -- by programmed reboot in CC -- like a scheduled reboot. callControlHardwareTrap (10), -- by hardware trap in CC callControlSoftwareTrap (11), -- by software trap in CC callControlLOADCommand (12), -- by LOAD command in CC callControlDiskFailure (13), -- because of disk failure callControlHardwareReset (14), -- by hardware reset in CC callControlMemoryFragmentation (15), -- because of memory fragmentation in CC callControlVxWorksTaskDoesNotExist (16), -- because VxWorks task does not exist callControlVxWorksTaskSuspended (17), -- because VxWorks task is suspended callControlVxWorksTaskNotResponding (18), -- because VxWorks task is not responding callControlVxWorksRestart (19), -- because of unknown VxWorks restart callControlUnkownProcess (20), -- by unknown process shutdownCauseNotReported (21) -- Shutdown cause not reported.
1.3.6.1.4.1.1027.4.1.1.2.2.6INTEGERread-onlymandatory
mitelIpera3000AlmResetCause
OBJECT-TYPE
Defines the last known reset cause. As best can be determined by the platform.
1.3.6.1.4.1.1027.4.1.1.2.2.7MitelIpera3000ResetCauseread-onlymandatory
mitelIpera3000AlmResetCauseBITS
OBJECT-TYPE
The reset bits for this system. hardReset(0), softReset(1), busMonitorReset(2), cpuSwWatchdogReset(3), checkStopReset(4), JTAGReset(5), CPLDWatchdogReset(6), powerOnReset(7), softwareReset(8), pushButtonReset(9) If the bit is set, then that reason is responsible for the system reset. Note: combinations of bits set is possible. Most significant bit set is typically the reason for the reset. Typical Combinations are: 0x0003 - external hard reset 0x0010 - check stop reset 0x0043 - CPLD watch dog reset 0x0100 - software initiated reset no external hard reset asserted 0x0103 - software initiated reset 0x0200 - push button reset no external hard hard reset asserted 0x0203 - push button reset
1.3.6.1.4.1.1027.4.1.1.2.2.8INTEGERread-onlymandatory
mitelIpera3000Notifications
OBJECT-IDENTITY
1.3.6.1.4.1.1027.4.1.1.2.3
mitelIpera3000Resilience
OBJECT-IDENTITY
1.3.6.1.4.1.1027.4.1.1.2.4
mitelIpera3000ResTable
OBJECT-TYPE
Table defining the resiliency state for the primary ICP that has gone into resilient mode.
1.3.6.1.4.1.1027.4.1.1.2.4.1not-accessiblemandatory
mitelIpera3000ResTableEntry
OBJECT-TYPE
A row defining a single resiliency table entry.
1.3.6.1.4.1.1027.4.1.1.2.4.1.1not-accessiblemandatory
mitelIpera3000ResTblPriSysName
OBJECT-TYPE
The System Name of the primary ICP. Empty strigs are no allowed. The index column for the Resilience Table.
1.3.6.1.4.1.1027.4.1.1.2.4.1.1.1DisplayString (SIZE(0..255))read-onlymandatory
mitelIpera3000ResTblPriCEID
OBJECT-TYPE
The Cluster Element ID of the primary ICP.
1.3.6.1.4.1.1027.4.1.1.2.4.1.1.2DisplayString (SIZE(0..255))read-onlymandatory
mitelIpera3000ResTblClusterName
OBJECT-TYPE
The Cluster Name of group that the primary and secondary are a member of.
1.3.6.1.4.1.1027.4.1.1.2.4.1.1.3DisplayString (SIZE(0..255))read-onlymandatory
mitelIpera3000ResTblDetectDate
OBJECT-TYPE
Defines when the alarm was detected.
1.3.6.1.4.1.1027.4.1.1.2.4.1.1.4DateAndTimeread-onlymandatory
mitelIpera3000ResTblStatus
OBJECT-TYPE
Status of the entry.
1.3.6.1.4.1.1027.4.1.1.2.4.1.1.5INTEGER {firstSetFailover(1), healthCheckComplete(2), handOffComplete(3)}read-onlymandatory
mitelIpera3000Applications
OBJECT-IDENTITY
1.3.6.1.4.1.1027.4.1.1.2.5
mitelComplIpera3000
OBJECT-IDENTITY
1.3.6.1.4.1.1027.5.1.4
mitelGrpIpera3000System
OBJECT-IDENTITY
1.3.6.1.4.1.1027.5.2.4.1
mitelGrpIpera3000Alarms
OBJECT-IDENTITY
1.3.6.1.4.1.1027.5.2.4.2
mitelAgentIpera3000
OBJECT-IDENTITY
1.3.6.1.4.1.1027.5.3.3

Notifications

NameOIDStatus
mitelIpera3000NotifAlarm
NOTIFICATION-TYPE
This notification is generated whenever an alarm condition is detected or cleared. The manager is expected to retrieve the corresponding alarm and category table information.
1.3.6.1.4.1.1027.1.2.3.0.301
mitelIpera3000ShutdownAlarm
NOTIFICATION-TYPE
This notification is generated whenever the system can detect a shutdown of the system.
1.3.6.1.4.1.1027.1.2.3.0.302
mitelIpera3000RestartCompleteAlarm
NOTIFICATION-TYPE
This notification is generated whenever the system has completed booting and is now opperational. The Reset Cause can give a post mortum reason for the startup.
1.3.6.1.4.1.1027.1.2.3.0.303
mitelIpera3000NotifResiltFirstSetFailover
NOTIFICATION-TYPE
This notification is generated when the first set fails-over from a primary to secondary node.
1.3.6.1.4.1.1027.1.2.3.0.501
mitelIpera3000NotifResiltHealthCheckComplete
NOTIFICATION-TYPE
This notification is generated when the primary ICP has now recovered. This means that the primary ICP has passed a system health check as determined by the resiliency application on this node.
1.3.6.1.4.1.1027.1.2.3.0.502
mitelIpera3000NotifResiltHandoffComplete
NOTIFICATION-TYPE
This notification is generated when all phones, from a particular primary ICP, that had failed over to this node have completed handoff back to the primary ICP.
1.3.6.1.4.1.1027.1.2.3.0.503