MIBs Depot

MITEL-IPFILTER-MIB

Registered at
1.3.6.1.4.1.1027.4.8.1.1.1
Last updated
2003-03-24 09:25
Organization
MITEL Corporation
Revisions
2003-03-24 09:25, 1999-03-01 00:00
Namespace
mitel
Source file
MITEL-IPFILTER-MIB
Digest
sha256:dcf1931f13343c94c053f5cd3a2e5e773e3d5725a5267a936824feb69ab0d7a0

Description

The MITEL IP MIB module.

Contact

Standards Group, Postal: MITEL Corporation 350 Legget Drive, PO Box 13089 Kanata, Ontario Canada K2K 1X3 Tel: +1 613 592 2122 Fax: +1 613 592 4784 E-mail: std@mitel.com

Imports

FromSymbols
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
MITEL-IPFILTER-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
mitel
OBJECT-IDENTITY
1.3.6.1.4.1.1027
mitelIdentification
OBJECT-IDENTITY
1.3.6.1.4.1.1027.1
mitelIdCallServers
OBJECT-IDENTITY
1.3.6.1.4.1.1027.1.2
mitelIdCsIpera1000
OBJECT-IDENTITY
1.3.6.1.4.1.1027.1.2.4
mitelProprietary
OBJECT-IDENTITY
1.3.6.1.4.1.1027.4
mitelPropIpNetworking
OBJECT-IDENTITY
1.3.6.1.4.1.1027.4.8
mitelIpNetRouter
OBJECT-IDENTITY
1.3.6.1.4.1.1027.4.8.1
mitelRouterIpGroup
OBJECT-IDENTITY
1.3.6.1.4.1.1027.4.8.1.1
mitelFltGrpAccessRestrictEnable
OBJECT-TYPE
This object indicates if the IP Access Restriction table is being used to filter or forward packets.
1.3.6.1.4.1.1027.4.8.1.1.1.1INTEGER {enabled(1), disabled(2)}read-writecurrent
mitelFltGrpLogicalTable
OBJECT-TYPE
A table containing information about logical IP LAN destinations.
1.3.6.1.4.1.1027.4.8.1.1.1.2not-accessiblecurrent
mitelFltGrpLogicalEntry
OBJECT-TYPE
Each entry of this table contains information about a specific logical interface toa local area network. Each logical LAN can support routing or bridging functions, these are considered virtual interfaces.
1.3.6.1.4.1.1027.4.8.1.1.1.2.1not-accessiblecurrent
mitelLogTableAccessDef
OBJECT-TYPE
This object indicates what default access rights will apply to IP packets that do not match any of the access restrictions.
1.3.6.1.4.1.1027.4.8.1.1.1.2.1.1INTEGER {filter(1), forward(2)}read-writecurrent
mitelLogTableAllowSrcRouting
OBJECT-TYPE
This indicates whether IP datagrams received on this interface and containing a source route option are to be discarded or accepted.
1.3.6.1.4.1.1027.4.8.1.1.1.2.1.2INTEGER {enabled(1), disabled(2)}read-writecurrent
mitelFltGrpAccessRestrictTable
OBJECT-TYPE
The IP Access REstriction configuration table.
1.3.6.1.4.1.1027.4.8.1.1.1.3not-accessiblecurrent
mitelFltGrpAccessRestrictEntry
OBJECT-TYPE
Contains information about a single IP Access filter.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1not-accessiblecurrent
mitelAccResTableIfIndex
OBJECT-TYPE
Identifies the destination interface to which this filter apply.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.1Integer32read-onlycurrent
mitelAccResTableOrder
OBJECT-TYPE
Specifies the order that the filters on a destination are searched.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.2Integer32read-onlycurrent
mitelAccResTableType
OBJECT-TYPE
This object indicates what action should be taken when a match on this entry has occurred.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.3INTEGER {filter(1), forward(2), neither(3)}read-writecurrent
mitelAccResTableSrcAddrFrom
OBJECT-TYPE
Defines the lower bound of the source IP address range. When determining address ranges, these four values are sequential: 255.255.255.254, 255.255.255.255, 0.0.0.0, and 0.0.0.1.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.4IpAddressread-writecurrent
mitelAccResTableSrcAddrTo
OBJECT-TYPE
Defines the upper bound of the source IP address range. When determining address ranges, these four values are sequential: 255.255.255.254, 255.255.255.255, 0.0.0.0, and 0.0.0.1.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.5IpAddressread-writecurrent
mitelAccResTableSrcAddrOutsideRange
OBJECT-TYPE
This indicates whether action is taken on values outside of the source IP address range or within that range.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.6INTEGER {enabled(1), disabled(2)}read-writecurrent
mitelAccResTableDstAddrFrom
OBJECT-TYPE
Defines the lower bound of the destination IP address range. When determining address ranges, these four values are sequential: 255.255.255.254, 255.255.255.255, 0.0.0.0, and 0.0.0.1.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.7IpAddressread-writecurrent
mitelAccResTableDstAddrTo
OBJECT-TYPE
Defines the upper bound of the destination IP address range. When determining address ranges, these four values are sequential: 255.255.255.254, 255.255.255.255, 0.0.0.0, and 0.0.0.1.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.8IpAddressread-writecurrent
mitelAccResTableDstAddrOutsideRange
OBJECT-TYPE
This indicates whether action is taken on values outside of the destination IP address range or within that range.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.9INTEGER {enabled(1), disabled(2)}read-writecurrent
mitelAccResTableProtocolFrom
OBJECT-TYPE
Defines the lower bound of the protocol ID range. When determining protocol ID ranges, these four values are sequential: 254, 255, 0, and 1.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.10INTEGER (0..255)read-writecurrent
mitelAccResTableProtocolTo
OBJECT-TYPE
Defines the upper bound of the protocol ID range. When determining protocol ID ranges, these four values are sequential: 254, 255, 0, and 1.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.11INTEGER (0..255)read-writecurrent
mitelAccResTableProtocolOutsideRange
OBJECT-TYPE
This indicates whether action is taken on values outside of the protocol ID range or within that range.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.12INTEGER {enabled(1), disabled(2)}read-writecurrent
mitelAccResTableSrcPortFrom
OBJECT-TYPE
Defines the lower bound of the source port number range. When determining port number ranges, these four values are sequential: 65534, 65535, 0, and 1.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.13INTEGER (0..65535)read-writecurrent
mitelAccResTableSrcPortTo
OBJECT-TYPE
Defines the upper bound of the source port number range. When determining port number ranges, these four values are sequential: 65534, 65535, 0, and 1.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.14INTEGER (0..65535)read-writecurrent
mitelAccResTableSrcPortOutsideRange
OBJECT-TYPE
This indicates whether action is taken on values outside of the source port number range or within that range.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.15INTEGER {enabled(1), disabled(2)}read-writecurrent
mitelAccResTableDstPortFrom
OBJECT-TYPE
Defines the lower bound of the destination port number range. When determining port number ranges, these four values are sequential: 65534, 65535, 0, and 1.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.16INTEGER (0..65535)read-writecurrent
mitelAccResTableDstPortTo
OBJECT-TYPE
Defines the upper bound of the destination port number range. When determining port number ranges, these four values are sequential: 65534, 65535, 0, and 1.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.17INTEGER (0..65535)read-writecurrent
mitelAccResTableDstPortOutsideRange
OBJECT-TYPE
This indicates whether action is taken on values outside of the destination port number range or within that range.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.18INTEGER {enabled(1), disabled(2)}read-writecurrent
mitelAccResTableTcpSyn
OBJECT-TYPE
TCP header, synchronize sequence numbers flag.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.19INTEGER {any(1), zero(2), one(3)}read-writecurrent
mitelAccResTableTcpAck
OBJECT-TYPE
TCP header, acknowledgment flag.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.20INTEGER {any(1), zero(2), one(3)}read-writecurrent
mitelAccResTableTcpFin
OBJECT-TYPE
TCP header, finish flag.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.21INTEGER {any(1), zero(2), one(3)}read-writecurrent
mitelAccResTableTcpRst
OBJECT-TYPE
TCP header, reset flag.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.22INTEGER {any(1), zero(2), one(3)}read-writecurrent
mitelAccResTableMatchIn
OBJECT-TYPE
Indicates whether the filter applies to datagrams received on the interface. Normally, either mitelAccResTableMatchIn or mitelAccResTableMatchOut should be enabled.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.23INTEGER {enabled(1), disabled(2)}read-writecurrent
mitelAccResTableMatchOut
OBJECT-TYPE
Indicates whether the filter applies to datagrams transmitted on the interface. Normally, either mitelAccResTableMatchIn or mitelAccResTableMatchOut should be enabled.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.24INTEGER {enabled(1), disabled(2)}read-writecurrent
mitelAccResTableLog
OBJECT-TYPE
Controls whether a log message is to be produced each time a datagram matches the filter.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.25INTEGER {enabled(1), disabled(2)}read-writecurrent
mitelAccResTableTrap
OBJECT-TYPE
Controls the generation of SNMP trap.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.26INTEGER {enabled(1), disabled(2)}read-writecurrent
mitelAccResTableStatus
OBJECT-TYPE
The current status of this entry.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.27RowStatusread-createcurrent
mitelAccResTableCount
OBJECT-TYPE
Records the number of datagrams that matched this instance.
1.3.6.1.4.1.1027.4.8.1.1.1.3.1.28Integer32read-onlycurrent

Notifications

NameOIDStatus
mitelAccResTableTrapped
NOTIFICATION-TYPE
The mitelAccResTableTrapped trap indicates that a datagram has matched a mitelFltGrpAccessRestrictEntry that has the mitelAccResTableTrap enabled.
1.3.6.1.4.1.1027.1.2.4.0.402current

Conformance

NameOIDStatus
mitelIpera1000Notifications
NOTIFICATION-GROUP
Call Server Ipera 1000 Notifications.
1.3.6.1.4.1.1027.1.2.4.0current