MITEL-DHCP-MIB
- Registered at
- 1.3.6.1.4.1.1027.1.2.41.3.6.1.4.1.1027.4.8
- Last updated
- 2005-11-07 12:00
- Organization
- MITEL Corporation
- Revisions
- 2005-11-07 12:00, 2003-03-21 12:31, 1999-03-01 00:00
- Namespace
- mitel
- Source file
MITEL-DHCP-MIB- Digest
sha256:2658e9736d838cf0f54f56ceccd5b8190e1f8ea768024c3d03738c53b2e50df7
Description
The MITEL DHCP MIB module.
Contact
Standards Group, Postal: MITEL Corporation 350 Legget Drive, PO Box 13089 Kanata, Ontario Canada K2K 1X3 Tel: +1 613 592 2122 Fax: +1 613 592 4784 E-mail: std@mitel.com
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, enterprises, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
MITEL-DHCP-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Under this module's arcs
Where the registration tree carries on below this module.
| Arc | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1027.4.8.1 | mitelIpNetRouter | MITEL-PROPIPNETWORKING-MIB |
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| MitelDhcpServerOptionList TEXTUAL-CONVENTION The MITEL-defined DHCP Options. | current | |||
| MitelDhcpServerProtocol TEXTUAL-CONVENTION The MITEL-defined DHCP Protocol. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| mitel OBJECT-IDENTITY | 1.3.6.1.4.1.1027 | |||
| mitelIdentification OBJECT-IDENTITY | 1.3.6.1.4.1.1027.1 | |||
| mitelIdCallServers OBJECT-IDENTITY | 1.3.6.1.4.1.1027.1.2 | |||
| mitelIdCsIpera1000 OBJECT-IDENTITY | 1.3.6.1.4.1.1027.1.2.4 | |||
| mitelProprietary OBJECT-IDENTITY | 1.3.6.1.4.1.1027.4 | |||
| mitelPropIpNetworking OBJECT-IDENTITY | 1.3.6.1.4.1.1027.4.8 | |||
| mitelIpNetRouter OBJECT-IDENTITY | 1.3.6.1.4.1.1027.4.8.1 | |||
| mitelDhcpRelayAgentEnable OBJECT-TYPE Configures the router to enable the DHCP/BOOTP relay agent. The default is disabled. | 1.3.6.1.4.1.1027.4.8.1.3.1 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| mitelDhcpRelayAgentMaxHops OBJECT-TYPE This object determines the maximum allowed value the hops field of the received DHCP/BOOTP packet can have. Packets with higher values will be rejected. | 1.3.6.1.4.1.1027.4.8.1.3.2 | INTEGER (1..16) | read-write | current |
| mitelDhcpRelayAgentServerTable OBJECT-TYPE This table is used to display and configure the list of servers to which the relay agent will relay DHCP/BOOTP REQUEST packets. | 1.3.6.1.4.1.1027.4.8.1.3.3 | not-accessible | current | |
| mitelDhcpRelayAgentServerEntry OBJECT-TYPE Each entry in this table contains information on a DHCP/BOOTP server. | 1.3.6.1.4.1.1027.4.8.1.3.3.1 | not-accessible | current | |
| mitelDhcpRelayAgentServerAddr OBJECT-TYPE The IP address of the DHCP/BOOTP server. | 1.3.6.1.4.1.1027.4.8.1.3.3.1.1 | IpAddress | read-write | current |
| mitelDhcpRelayAgentServerName OBJECT-TYPE This object indicates the associated name of the DHCP/BOOTP server. It's main purpose is to be used as a reference name. | 1.3.6.1.4.1.1027.4.8.1.3.3.1.2 | DisplayString (SIZE(1..16)) | read-write | current |
| mitelDhcpRelayAgentServerStatus OBJECT-TYPE The current status of this entry. | 1.3.6.1.4.1.1027.4.8.1.3.3.1.3 | RowStatus | read-create | current |
| mitelDhcpRelayAgentBroadcast OBJECT-TYPE Determines wether or not the DHCP Relay Agent should retransmit received BOOTP requests using local broadcast on each IP interface. The default is disabled. | 1.3.6.1.4.1.1027.4.8.1.3.4 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| mitelDhcpServerGroup OBJECT-IDENTITY | 1.3.6.1.4.1.1027.4.8.1.3.5 | |||
| mitelDhcpServerGeneralGroup OBJECT-IDENTITY | 1.3.6.1.4.1.1027.4.8.1.3.5.1 | |||
| mitelDhcpServerGeneralEnable OBJECT-TYPE Configures the router to enable the DHCP/BOOTP server The default is disabled. | 1.3.6.1.4.1.1027.4.8.1.3.5.1.1 | INTEGER {enabled(1), disabled(2), autoconfig(3)} | read-write | current |
| mitelDhcpServerGeneralGateway OBJECT-TYPE Determines wether or not the local IP address associated with the interface on which the DHCP request was received should be advertised as a default gateway, and if yes with which priority. | 1.3.6.1.4.1.1027.4.8.1.3.5.1.2 | INTEGER {this-if-first(1), this-if-last(2), not-this-if(3)} | read-write | current |
| mitelDhcpServerGeneralRefDhcpServer OBJECT-TYPE Indicates if unknown requested options values should be obtained from another DHCP server (if possible). Adequate values are: - a specific IP address of a known DHCP server - a IP address specifiying the interface on which the DHCP server should be found (using broadcast). i.e. 0.0.0.x where x is the interface logical ID. - 255.255.255.255: broadcast on all interfaces. - 0.0.0.0: the feature is disabled. | 1.3.6.1.4.1.1027.4.8.1.3.5.1.3 | IpAddress | read-write | current |
| mitelDhcpServerGeneralPingStatus OBJECT-TYPE Enable/disable PING server functionality when passing out leases. | 1.3.6.1.4.1.1027.4.8.1.3.5.1.4 | INTEGER {enable(1), disable(2)} | read-write | current |
| mitelDhcpServerSubnetTable OBJECT-TYPE This table is used to configure the group of IP addresses that can be handed out by the DHCP server. | 1.3.6.1.4.1.1027.4.8.1.3.5.2 | not-accessible | current | |
| mitelDhcpServerSubnetEntry OBJECT-TYPE Each entry in this table contains information on a subnet serverd by the DHCP server. | 1.3.6.1.4.1.1027.4.8.1.3.5.2.1 | not-accessible | current | |
| mitelDhcpServerSubnetAddr OBJECT-TYPE The IP address of the subnet (key). | 1.3.6.1.4.1.1027.4.8.1.3.5.2.1.1 | IpAddress | read-only | current |
| mitelDhcpServerSubnetSharedNet OBJECT-TYPE The IP address of another subnet that is on the same shared media as this subnet. The address of the shared subnet MUST also be configured on this server. The address 0.0.0.0 should be used if this subnet is not shared. (key) | 1.3.6.1.4.1.1027.4.8.1.3.5.2.1.2 | IpAddress | read-only | current |
| mitelDhcpServerSubnetMask OBJECT-TYPE The subnet mask of the subnet. | 1.3.6.1.4.1.1027.4.8.1.3.5.2.1.3 | IpAddress | read-write | current |
| mitelDhcpServerSubnetGateway OBJECT-TYPE Indicate whether or not the IP address configured on the interface which received the DHCP request should be advertised as a default gateway. If yes, this also indicate the relative priority compared to additional gateways that might be configured (DHCP option 3). | 1.3.6.1.4.1.1027.4.8.1.3.5.2.1.4 | INTEGER {this-if-first(1), this-if-last(2), not-this-if(3), default(4)} | read-write | current |
| mitelDhcpServerSubnetName OBJECT-TYPE The name of the configured subnet (informational only). | 1.3.6.1.4.1.1027.4.8.1.3.5.2.1.5 | DisplayString (SIZE(1..16)) | read-write | current |
| mitelDhcpServerSubnetDeleteTree OBJECT-TYPE If this flag is set to enable, when the object is deleted, all the DHCP server configuration objects that depend on it will be deleted at the same time. | 1.3.6.1.4.1.1027.4.8.1.3.5.2.1.6 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| mitelDhcpServerSubnetStatus OBJECT-TYPE The current status of this entry. | 1.3.6.1.4.1.1027.4.8.1.3.5.2.1.7 | RowStatus | read-create | current |
| mitelDhcpServerRangeTable OBJECT-TYPE A list of ranges that are configured on this server. | 1.3.6.1.4.1.1027.4.8.1.3.5.3 | not-accessible | current | |
| mitelDhcpServerRangeEntry OBJECT-TYPE A logical row in the mitelServerGrpRangeTblTable. | 1.3.6.1.4.1.1027.4.8.1.3.5.3.1 | not-accessible | current | |
| mitelDhcpServerRangeStart OBJECT-TYPE The IP address of the first address in the range (key). | 1.3.6.1.4.1.1027.4.8.1.3.5.3.1.1 | IpAddress | read-only | current |
| mitelDhcpServerRangeEnd OBJECT-TYPE The IP address of the last address in the range. | 1.3.6.1.4.1.1027.4.8.1.3.5.3.1.2 | IpAddress | read-only | current |
| mitelDhcpServerRangeSubnet OBJECT-TYPE The IP address of the subnet which includes this range. This IP address is used to find the corresponding mitelDhcpServerSubnetEntry | 1.3.6.1.4.1.1027.4.8.1.3.5.3.1.3 | IpAddress | read-only | current |
| mitelDhcpServerRangeProtocol OBJECT-TYPE How the addresses in that group should be assigned. none = the address are reserved by the administrator (do we need this ?). | 1.3.6.1.4.1.1027.4.8.1.3.5.3.1.4 | MitelDhcpServerProtocol | read-write | current |
| mitelDhcpServerRangeGateway OBJECT-TYPE Indicate whether or not the IP address configured on the interface which received the DHCP request should be advertised as a default gateway. If yes, this also indicate the relative priority compared to additional gateways that might be configured (DHCP option 3). | 1.3.6.1.4.1.1027.4.8.1.3.5.3.1.5 | INTEGER {this-if-first(1), this-if-last(2), not-this-if(3), default(4)} | read-write | current |
| mitelDhcpServerRangeLeaseTime OBJECT-TYPE The duration of the lease of IP addressed in this range in seconds. A value of 4294967295 (0xFFFFFFFF) means that the lease is permanent. A value of 0 (0x00000000) means that the address in that range can not be assigned. | 1.3.6.1.4.1.1027.4.8.1.3.5.3.1.6 | Integer32 | read-write | current |
| mitelDhcpServerRangeName OBJECT-TYPE The name of the configured range (informational only). | 1.3.6.1.4.1.1027.4.8.1.3.5.3.1.7 | DisplayString (SIZE(1..16)) | read-write | current |
| mitelDhcpServerRangeMatchClassId OBJECT-TYPE If this flag is set to enable, IP addresses in this range will only be assigned to clients indicating a class ID identical to the range name. | 1.3.6.1.4.1.1027.4.8.1.3.5.3.1.8 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| mitelDhcpServerRangeDeleteTree OBJECT-TYPE If this flag is set to enable, when the object is deleted, all the DHCP server configuration objects that depend on it will be deleted at the same time. | 1.3.6.1.4.1.1027.4.8.1.3.5.3.1.9 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| mitelDhcpServerRangeStatus OBJECT-TYPE The current status of this entry. | 1.3.6.1.4.1.1027.4.8.1.3.5.3.1.10 | RowStatus | read-create | current |
| mitelDhcpServerStaticIpTable OBJECT-TYPE A list of the addresses that are statically configured. | 1.3.6.1.4.1.1027.4.8.1.3.5.4 | not-accessible | current | |
| mitelDhcpServerStaticIpEntry OBJECT-TYPE A logical row in the mitelDhcpServerStaticIpTable. | 1.3.6.1.4.1.1027.4.8.1.3.5.4.1 | not-accessible | current | |
| mitelDhcpServerStaticIpAddr OBJECT-TYPE The IP address of the entry (key). This IP address has to be unique across the DHCP server configuration. It can not be duplicated in another mitelDhcpServerStaticIpEntry and it can not be part of a mitelDhcpServerRangeEntry. | 1.3.6.1.4.1.1027.4.8.1.3.5.4.1.1 | IpAddress | read-only | current |
| mitelDhcpServerStaticIpSubnet OBJECT-TYPE The IP address of the subnet which includes this IP address. This IP address is used to find the corresponding mitelDhcpServerSubnetEntry | 1.3.6.1.4.1.1027.4.8.1.3.5.4.1.2 | IpAddress | read-only | current |
| mitelDhcpServerStaticIpProtocol OBJECT-TYPE How the addresses in that group should be assigned. none = the address are reserved by the administrator (do we need this ?). | 1.3.6.1.4.1.1027.4.8.1.3.5.4.1.3 | MitelDhcpServerProtocol | read-write | current |
| mitelDhcpServerStaticIpGateway OBJECT-TYPE Indicate whether or not the IP address configured on the interface which received the DHCP request should be advertised as a default gateway. If yes, this also indicate the relative priority compared to additional gateways that might be configured (DHCP option 3). | 1.3.6.1.4.1.1027.4.8.1.3.5.4.1.4 | INTEGER {this-if-first(1), this-if-last(2), not-this-if(3), default(4)} | read-write | current |
| mitelDhcpServerStaticIpMacAddress OBJECT-TYPE The hardware type and hardware address of the client that has been assigned this IP address. The first octet of this object contains the hardware type from the 'htype' field of the BOOTP packet and the remaining octets contain the hardware address from the 'chaddr' field of the BOOTP packet. Either the mitelDhcpServerStaticIpClientId or the mitelDhcpServerStaticIpMacAddress field has to have a valid value. If none of them are configured, then the IP address is just not assignable by this server. | 1.3.6.1.4.1.1027.4.8.1.3.5.4.1.5 | OCTET STRING (SIZE(1..255)) | read-write | current |
| mitelDhcpServerStaticIpClientId OBJECT-TYPE The client-id of the client that has been assigned this lease. The client-id is the value specified in option 61 (client-id option) when the lease was assigned. This object may be empty if the lease has not been previously assigned or if the client- id option was not specified when the lease was assigned. Either the mitelDhcpServerStaticIpClientId or the mitelDhcpServerStaticIpMacAddress field has to have a valid value. If none of them are configured, then the IP address is just not assignable by this server. | 1.3.6.1.4.1.1027.4.8.1.3.5.4.1.6 | OCTET STRING (SIZE(0..255)) | read-write | current |
| mitelDhcpServerStaticIpName OBJECT-TYPE The name of the configured range (informational only). | 1.3.6.1.4.1.1027.4.8.1.3.5.4.1.7 | DisplayString (SIZE(1..16)) | read-write | current |
| mitelDhcpServerStaticIpDeleteTree OBJECT-TYPE If this flag is set to enable, when the object is deleted, all the DHCP server configuration objects that depend on it will be deleted at the same time. | 1.3.6.1.4.1.1027.4.8.1.3.5.4.1.8 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| mitelDhcpServerStaticIpStatus OBJECT-TYPE The current status of this entry. | 1.3.6.1.4.1.1027.4.8.1.3.5.4.1.9 | RowStatus | read-create | current |
| mitelDhcpServerOptionTable OBJECT-TYPE This table contain list of options that will be sent to clients requesting IP addresses. | 1.3.6.1.4.1.1027.4.8.1.3.5.5 | not-accessible | current | |
| mitelDhcpServerOptionEntry OBJECT-TYPE Each entry in this list contains information about a specific DHCP option. | 1.3.6.1.4.1.1027.4.8.1.3.5.5.1 | not-accessible | current | |
| mitelDhcpServerOptionAddr OBJECT-TYPE This IP address keys in either the mitelDhcpServerRangeTable or the mitelDhcpServerStaticIpTable or the mitelDhcpServerSubnetTable. It indicates the realm in which that particular option/value pair is to be handed out. If the IP address key is 0.0.0.0 this means that the option is valid for any of the range/static IP configured. In the case where the same option number is configured for different realms, the selection will go from the most specific to the most generic according to the following scheme: 1. mitelDhcpGrpStaticIpTable or mitelDhcpServerRangeTable 2. mitelDhcpServerSubnetTable 3. global definition (i.e. mitelDhcpGrpOptionIp = 0.0.0.0) | 1.3.6.1.4.1.1027.4.8.1.3.5.5.1.1 | IpAddress | read-only | current |
| mitelDhcpServerOptionNumber OBJECT-TYPE This is the option number as specified in RFC 2132: 'DHCP Options and BOOTP Vendor Extensions'. Some of the options are not configurable that way (like subnet mask). The options that are not configurable are the ones that can be derived from the general configuration (from either the mitelDhcpServerSubnetTableor mitelDhcpServerRangeTable or mitelDhcpServerStaticIpTable) or that have a meaning only from the client to the server (such as the client ID (option 61)). Range: 1..254 | 1.3.6.1.4.1.1027.4.8.1.3.5.5.1.2 | MitelDhcpServerOptionList | read-only | current |
| mitelDhcpServerOptionDisplayFormat OBJECT-TYPE This indicates how the value should be formated. This is informational only and may be ignored. If something else than default is specified, the system will attempt to display the value field according to the setting. Otherwise, it will try to establish the correct way to display it based on the option number. | 1.3.6.1.4.1.1027.4.8.1.3.5.5.1.3 | INTEGER {default(1), ip-address(2), ascii-string(3), integer(4), octet-string(5)} | read-write | current |
| mitelDhcpServerOptionValue OBJECT-TYPE This contains the value of the option encoded as it will be sent in the DHCP packets. | 1.3.6.1.4.1.1027.4.8.1.3.5.5.1.4 | OCTET STRING (SIZE(1..255)) | read-write | current |
| mitelDhcpServerOptionStatus OBJECT-TYPE The current status of this entry. | 1.3.6.1.4.1.1027.4.8.1.3.5.5.1.5 | RowStatus | read-create | current |
| mitelDhcpServerLeaseTable OBJECT-TYPE This table contain a list of all the assigned leases and their current status. | 1.3.6.1.4.1.1027.4.8.1.3.5.6 | not-accessible | current | |
| mitelDhcpServerLeaseEntry OBJECT-TYPE Each entry in this list contains information about a specific lease. | 1.3.6.1.4.1.1027.4.8.1.3.5.6.1 | not-accessible | current | |
| mitelDhcpServerLeaseAddr OBJECT-TYPE The IP address described in that lease. | 1.3.6.1.4.1.1027.4.8.1.3.5.6.1.1 | IpAddress | read-only | current |
| mitelDhcpServerLeaseSubnet OBJECT-TYPE The IP address indicating the subnet to which the IP address belongs. That IP address can be used as a key in the mitelDhcpServerSubnetTable. | 1.3.6.1.4.1.1027.4.8.1.3.5.6.1.2 | IpAddress | read-only | current |
| mitelDhcpServerLeaseRange OBJECT-TYPE A reference the the IP address Range from which this IP address has been assigned. This IP address can be used as a key for the mitelDhcpServerRangeTable. | 1.3.6.1.4.1.1027.4.8.1.3.5.6.1.3 | IpAddress | read-only | current |
| mitelDhcpServerLeaseType OBJECT-TYPE The type of this address. | 1.3.6.1.4.1.1027.4.8.1.3.5.6.1.4 | INTEGER {static(1), dynamic(2), configuration-reserved(3), server-reserved(4)} | read-only | current |
| mitelDhcpServerLeaseEndTime OBJECT-TYPE The value that sysUpTime will be when the lease expires. A value of 4294967295 (i.e.: 0xFFFFFFFF) should be used for leases that have a lease time which is 'infinite' and for BOOTP leases. | 1.3.6.1.4.1.1027.4.8.1.3.5.6.1.5 | TimeTicks | read-only | current |
| mitelDhcpServerLeaseAllowedProtocol OBJECT-TYPE The type of protocol that is allowed to be used to serve this address. A type of none(1) indicates that the address is not available to be served (e.g.: a reserved address). | 1.3.6.1.4.1.1027.4.8.1.3.5.6.1.6 | INTEGER {none(1), bootp(2), dhcp(3), bootp-or-dhcp(4)} | read-only | current |
| mitelDhcpServerLeaseServedProtocol OBJECT-TYPE The type of protocol that was used when this address was assigned. This object will have the value of none(1) if the lease has not been served. | 1.3.6.1.4.1.1027.4.8.1.3.5.6.1.7 | INTEGER {none(1), bootp(2), dhcp(3)} | read-only | current |
| mitelDhcpServerLeaseMacAddress OBJECT-TYPE The hardware type and hardware address of the client that has been assigned this lease. The first octet of this object contains the hardware type from the 'htype' field of the BOOTP packet and the remaining octets contain the hardware address from the 'chaddr' field of the BOOTP packet. This object may be empty if the lease has not been previously served. | 1.3.6.1.4.1.1027.4.8.1.3.5.6.1.8 | OCTET STRING (SIZE(1..255)) | read-only | current |
| mitelDhcpServerLeaseClientId OBJECT-TYPE The client-id of the client that has been assigned this lease. The client-id is the value specified in option 61 (client-id option) when the lease was assigned. This object may be empty if the lease has not been previously assigned or if the client- id option was not specified when the lease was assigned. | 1.3.6.1.4.1.1027.4.8.1.3.5.6.1.9 | OCTET STRING (SIZE(0..255)) | read-only | current |
| mitelDhcpServerLeaseHostName OBJECT-TYPE The host name the client is configured with or if no host name was configured then the host name that the client supplied when requesting an address. | 1.3.6.1.4.1.1027.4.8.1.3.5.6.1.10 | DisplayString (SIZE(0..64)) | read-only | current |
| mitelDhcpServerLeaseDomainName OBJECT-TYPE The domain name assigned to the client. | 1.3.6.1.4.1.1027.4.8.1.3.5.6.1.11 | DisplayString (SIZE(0..255)) | read-only | current |
| mitelDhcpServerLeaseServedTime OBJECT-TYPE The system time at which this entry was created. | 1.3.6.1.4.1.1027.4.8.1.3.5.6.1.12 | INTEGER | read-only | current |
| mitelDhcpServerLeaseStatus OBJECT-TYPE The current status of this entry. | 1.3.6.1.4.1.1027.4.8.1.3.5.6.1.13 | RowStatus | read-create | current |
| mitelDhcpServerStatsGroup OBJECT-IDENTITY | 1.3.6.1.4.1.1027.4.8.1.3.5.7 | |||
| mitelDhcpServerStatsNumServers OBJECT-TYPE This indicates the number of configured DHCP servers which are used for the DHCP Relay Agent. | 1.3.6.1.4.1.1027.4.8.1.3.5.7.1 | INTEGER | read-only | current |
| mitelDhcpServerStatsConfSubnets OBJECT-TYPE This indicates the number of configured DHCP subnets. | 1.3.6.1.4.1.1027.4.8.1.3.5.7.2 | INTEGER | read-only | current |
| mitelDhcpServerStatsConfRanges OBJECT-TYPE This indicates the number of configured DHCP ranges. | 1.3.6.1.4.1.1027.4.8.1.3.5.7.3 | INTEGER | read-only | current |
| mitelDhcpServerStatsConfStatic OBJECT-TYPE This indicates the number of configured static IP addresses. | 1.3.6.1.4.1.1027.4.8.1.3.5.7.4 | INTEGER | read-only | current |
| mitelDhcpServerStatsConfOptions OBJECT-TYPE This indicates the number of configured DHCP Options. | 1.3.6.1.4.1.1027.4.8.1.3.5.7.5 | INTEGER | read-only | current |
| mitelDhcpServerStatsConfLeases OBJECT-TYPE This indicates the number of served leases. | 1.3.6.1.4.1.1027.4.8.1.3.5.7.6 | INTEGER | read-only | current |
| mitelDhcpServerVendorInfoTable OBJECT-TYPE This table contain list of vendor-specific-options that will be sent to clients when requesting an IP addresses. | 1.3.6.1.4.1.1027.4.8.1.3.5.8 | not-accessible | current | |
| mitelDhcpServerVendorInfoEntry OBJECT-TYPE Each entry in this list contains information about a vendor specific DHCP option. | 1.3.6.1.4.1.1027.4.8.1.3.5.8.1 | not-accessible | current | |
| mitelDhcpServerVendorInfoID OBJECT-TYPE The unique vendor Identifier. May or not make sense to someone viewing the data. | 1.3.6.1.4.1.1027.4.8.1.3.5.8.1.1 | DisplayString (SIZE(1..32)) | read-only | current |
| mitelDhcpServerVendorInfoName OBJECT-TYPE The unique name of the vendor. The suggestion is that this value be recognizable to someone viewing the data. | 1.3.6.1.4.1.1027.4.8.1.3.5.8.1.2 | DisplayString (SIZE(1..32)) | read-only | current |
| mitelDhcpServerVendorInfoOptionDisplayFormat OBJECT-TYPE This indicates how the value should be formated. This is informational only and may be ignored. If something else than default is specified, the system will attempt to display the value field according to the setting. Otherwise, it will try to establish the correct way to display it based on the option number. | 1.3.6.1.4.1.1027.4.8.1.3.5.8.1.3 | INTEGER {default(1), ip-address(2), ascii-string(3), integer(4), octet-string(5)} | read-write | current |
| mitelDhcpServerVendorInfoOptionValue OBJECT-TYPE The options that the vendor, the vendor specified in VendorInfoID, would want to send to it's clients. All content of this object would only make sense to the receiving client, no syntax or sematics of the content is specifed by this definition, that information would be specified by the vendor. | 1.3.6.1.4.1.1027.4.8.1.3.5.8.1.4 | OCTET STRING (SIZE(1..255)) | read-write | current |
| mitelDhcpServerVendorInfoStatus OBJECT-TYPE The current status of this entry. | 1.3.6.1.4.1.1027.4.8.1.3.5.8.1.5 | RowStatus | read-create | current |
| mitelDhcpClientTable OBJECT-TYPE This table contains a list of all DHCP Clients. | 1.3.6.1.4.1.1027.4.8.1.3.6 | not-accessible | current | |
| mitelDhcpClientEntry OBJECT-TYPE Each entry in this list contains information for a DHCP client. | 1.3.6.1.4.1.1027.4.8.1.3.6.1 | not-accessible | current | |
| mitelDhcpClientIndex OBJECT-TYPE The Index of this Client. This object's value has a direct correlation to the interface on which DHCP client has been defined. | 1.3.6.1.4.1.1027.4.8.1.3.6.1.1 | INTEGER | read-only | current |
| mitelDhcpClientId OBJECT-TYPE The ID of this client | 1.3.6.1.4.1.1027.4.8.1.3.6.1.2 | OCTET STRING | read-write | current |
| mitelDhcpClientLeaseAction OBJECT-TYPE The object allows the user to release the current IP address assigned to this DHCP client. The user can also conduct a renew action to obtain an IP address for this client. By default this object will return none(1). | 1.3.6.1.4.1.1027.4.8.1.3.6.1.3 | INTEGER {none(1), release(2), renew(3)} | read-only | current |
| mitelDhcpClientIpAddress OBJECT-TYPE The IP of this client assigned by the DHCP server. | 1.3.6.1.4.1.1027.4.8.1.3.6.1.4 | IpAddress | read-only | current |
| mitelDhcpClientLeaseObtained OBJECT-TYPE The time the lease was acquired | 1.3.6.1.4.1.1027.4.8.1.3.6.1.5 | TimeTicks | read-only | current |
| mitelDhcpClientLeaseExpired OBJECT-TYPE The time the current lease expires. | 1.3.6.1.4.1.1027.4.8.1.3.6.1.6 | TimeTicks | read-only | current |
| mitelDhcpClientDefaultGateway OBJECT-TYPE The default gateway IP for this client learned from the DHCP server. | 1.3.6.1.4.1.1027.4.8.1.3.6.1.7 | IpAddress | read-only | current |
| mitelDhcpClientServerIp OBJECT-TYPE The IP of this client's DHCP server. | 1.3.6.1.4.1.1027.4.8.1.3.6.1.8 | IpAddress | read-only | current |
| mitelDhcpClientPrimaryDns OBJECT-TYPE The primary DNS IP address of the client learned from the DHCP server. | 1.3.6.1.4.1.1027.4.8.1.3.6.1.9 | IpAddress | read-only | current |
| mitelDhcpClientSecondaryDns OBJECT-TYPE The secondary DNS IP address of the client learned from the DHCP server. | 1.3.6.1.4.1.1027.4.8.1.3.6.1.10 | IpAddress | read-only | current |
| mitelDhcpClientPrimaryWins OBJECT-TYPE The primary WINS IP address of the client learned from the DHCP server. | 1.3.6.1.4.1.1027.4.8.1.3.6.1.11 | IpAddress | read-only | current |
| mitelDhcpClientSecondaryWins OBJECT-TYPE The secondary WINS IP address of the client learned from the DHCP server. | 1.3.6.1.4.1.1027.4.8.1.3.6.1.12 | IpAddress | read-only | current |
| mitelDhcpClientDomainName OBJECT-TYPE The domain name of this client learned from the DHCP server. | 1.3.6.1.4.1.1027.4.8.1.3.6.1.13 | OCTET STRING | read-only | current |
| mitelDhcpClientName OBJECT-TYPE The name of this client. | 1.3.6.1.4.1.1027.4.8.1.3.6.1.14 | OCTET STRING | read-only | current |
| mitelDhcpClientAdminState OBJECT-TYPE The admin status of this client. | 1.3.6.1.4.1.1027.4.8.1.3.6.1.15 | INTEGER {enabled(1), disabled(2)} | read-only | current |
Notifications
| Name | OID | Status |
|---|---|---|
| mitelDhcpClientObtainedIp NOTIFICATION-TYPE The mitelDhcpClientObtainedIP trap indicates that the router has obtained a lease for an IP address from a DHCP server. | 1.3.6.1.4.1.1027.1.2.4.0.404 | current |
| mitelDhcpClientLeaseExpiry NOTIFICATION-TYPE The mitelDhcpClientLeaseExpiry trap indicates that the router's DHCP client lease has expired. | 1.3.6.1.4.1.1027.1.2.4.0.405 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| mitelIpera1000Notifications NOTIFICATION-GROUP Call Server Ipera 1000 Notifications. | 1.3.6.1.4.1.1027.1.2.4.0 | current |