MITEL-BCM-MIB
- Registered at
- 1.3.6.1.4.1.1027.4.2.1
- Last updated
- 2009-03-17 00:00
- Organization
- MITEL Networks Corporation
- Revisions
- 2009-03-17 00:00, 2006-01-10 00:00, 2005-10-04 01:00, 2005-10-03 01:00, 2005-09-30 01:00
- Namespace
- mitel
- Source file
MITEL-BCM-MIB- Digest
sha256:aac369de6ad0d1f1b8a9d7dac4b864b84c17249816e43a0ac2b93a81b1f57887
Description
The MITEL Broadcom Switch MIB module. This MIB module is defined to specifically provide additional statistical information for the Broadcom Switch subsystem.
Contact
Standards Group, Postal: MITEL Networks Corporation 350 Legget Drive, PO Box 13089 Kanata, Ontario Canada K2K 2W7 Tel: +1 613 592 2122 Fax: +1 613 592 4784 E-mail: std@mitel.com
Imports
| From | Symbols |
|---|---|
| IF-MIB | InterfaceIndex |
| MITEL-MIB | mitelPropTransmission |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB IF-MIB MITEL-BCM-MIB MITEL-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| mitelBCMObjects OBJECT-IDENTITY | 1.3.6.1.4.1.1027.4.2.1.1 | |||
| mitelBCMPortTable OBJECT-TYPE Table defining statistical information about each port of a Broadcom Switch sub-system. | 1.3.6.1.4.1.1027.4.2.1.1.1 | not-accessible | current | |
| mitelBCMPortTableEntry OBJECT-TYPE A row defining a single BCM Port table entry. | 1.3.6.1.4.1.1027.4.2.1.1.1.1 | not-accessible | current | |
| mitelBCMPortIndex OBJECT-TYPE The interface identifier for this switch port. Usually corresponds to ifIndex in the ifTable. | 1.3.6.1.4.1.1027.4.2.1.1.1.1.1 | InterfaceIndex | read-only | current |
| mitelBCMPortRxSAChanges OBJECT-TYPE The number of times the source address (SA) of good received packets has changed. A count greater than one generally indicates the port is connected to a repeater based network. | 1.3.6.1.4.1.1027.4.2.1.1.1.1.2 | Counter32 | read-only | current |
| mitelBCMPortRxLastSA OBJECT-TYPE The last received source address on this port. | 1.3.6.1.4.1.1027.4.2.1.1.1.1.3 | PhysAddress | read-only | current |
| mitelBCMChipCount OBJECT-TYPE The number of BCM ethernet chips in the system. | 1.3.6.1.4.1.1027.4.2.1.1.2 | Integer32 | read-only | current |
| mitelBCMChipTable OBJECT-TYPE Table defining characteristic information about each Broadcom Switch chip in the system. | 1.3.6.1.4.1.1027.4.2.1.1.3 | not-accessible | current | |
| mitelBCMChipTableEntry OBJECT-TYPE A row defining a single Broadcom (BCM) Chip table entry. | 1.3.6.1.4.1.1027.4.2.1.1.3.1 | not-accessible | current | |
| mitelBCMChipIndex OBJECT-TYPE The identifier for this switch chip. | 1.3.6.1.4.1.1027.4.2.1.1.3.1.1 | Integer32 (1..65535) | read-only | current |
| mitelBCMChipBIST OBJECT-TYPE The status of the BCM ethernet chip built-in-self-test (BIST). BCRAM(0) bit 2^0 - Buffer control RAM (only in BCM5380M) IPDBM(1) bit 2^1 - Internal packet data buffer memory MRAM(2) bit 2^2 - MIB RAM (only in BCM5380M) GMRAM(3) bit 2^3 - Gigabit MIB RAM (only in BCM5380M) If the bit is set, then that sub-system has failed. | 1.3.6.1.4.1.1027.4.2.1.1.3.1.2 | Bits {bcRam(0), ipDbm(1), mRam(2), gmRam(3)} | read-only | current |
| mitelBCMChipRev OBJECT-TYPE The BCM ethernet chip revision ID. | 1.3.6.1.4.1.1027.4.2.1.1.3.1.3 | DisplayString | read-only | current |
| mitelBCMChipType OBJECT-TYPE The BCM ethernet chip type. | 1.3.6.1.4.1.1027.4.2.1.1.3.1.4 | INTEGER {bcm5380m(1), bcm5325e(2), bcm5324m(3), bcmOther(4)} | read-only | current |
| mitelBCMConformance OBJECT-IDENTITY | 1.3.6.1.4.1.1027.4.2.1.2 | |||
| mitelBCMCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.1027.4.2.1.2.1 | |||
| mitelBCMGroups OBJECT-IDENTITY | 1.3.6.1.4.1.1027.4.2.1.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| mitelBCMSwitchCompliance MODULE-COMPLIANCE The compliance statement for mitel nodes that include a BCM switch sub-system. | 1.3.6.1.4.1.1027.4.2.1.2.1.1 | current |
| mitelBCMPortGroup OBJECT-GROUP A collection of objects that provide statistical infrormation about BCM switch ports. | 1.3.6.1.4.1.1027.4.2.1.2.2.1 | current |
| mitelBCMChipGroup OBJECT-GROUP A collection of objects that provide infrormation about BCM switch Chips. | 1.3.6.1.4.1.1027.4.2.1.2.2.2 | current |