MIBs Depot

MIMOSA-NETWORKS-BFIVE-MIB

Registered at
1.3.6.1.4.1.43356.2.1.2.1
1.3.6.1.4.1.43356.2.1.2.2
1.3.6.1.4.1.43356.2.1.2.3
1.3.6.1.4.1.43356.2.1.2.4
1.3.6.1.4.1.43356.2.1.2.5
1.3.6.1.4.1.43356.2.1.2.6
1.3.6.1.4.1.43356.2.1.2.7
1.3.6.1.4.1.43356.2.1.2.8
1.3.6.1.4.1.43356.2.4.1
Last updated
2015-06-03 00:00
Organization
Mimosa Networks www.mimosa.co
Revisions
2017-04-28 00:00
Namespace
mimosa
Source file
MIMOSA-NETWORKS-BFIVE-MIB
Digest
sha256:19e97ab1c01d34a21f5db8728bd490da902c8e01aeb221346857243318d92d40

Description

Mimosa device MIB definitions

Contact

postal: Mimosa Networks, Inc. 469 El Camino Real Ste 100 Santa Clara, CA 95050 email: support@mimosa.co

Imports

FromSymbols
IF-MIBifIndex
MIMOSA-NETWORKS-BASE-MIBmimosaConformanceGroup, mimosaWireless
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
MIMOSA-NETWORKS-BASE-MIB
MIMOSA-NETWORKS-BFIVE-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
DecimalFive
TEXTUAL-CONVENTION
Fixed point, five decimals
current
DecimalOne
TEXTUAL-CONVENTION
Fixed point, one decimal
current
DecimalTwo
TEXTUAL-CONVENTION
Fixed point, two decimals
current

Objects

NameOIDSyntaxAccessStatus
mimosaGeneral
OBJECT-IDENTITY
1.3.6.1.4.1.43356.2.1.2.1
mimosaDeviceName
OBJECT-TYPE
The name of the local Mimosa device. This unique identifier could be the same as the sysName object.
1.3.6.1.4.1.43356.2.1.2.1.1DisplayString (SIZE(0..64))read-onlycurrent
mimosaSerialNumber
OBJECT-TYPE
The unique serial number of the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.1.2DisplayString (SIZE(0..64))read-onlycurrent
mimosaFirmwareVersion
OBJECT-TYPE
The version of the currently installed and/or running firmware on the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.1.3DisplayString (SIZE(0..64))read-onlycurrent
mimosaFirmwareBuildDate
OBJECT-TYPE
The creation date of the currently installed and/or running firmware on the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.1.4DisplayString (SIZE(0..64))read-onlycurrent
mimosaLastRebootTime
OBJECT-TYPE
The last time the Mimosa device rebooted.
1.3.6.1.4.1.43356.2.1.2.1.5DisplayString (SIZE(0..64))read-onlycurrent
mimosaUnlockCode
OBJECT-TYPE
The code used to unlock the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.1.6DisplayString (SIZE(0..64))read-onlycurrent
mimosaLEDBrightness
OBJECT-TYPE
Indicates the intensity of the status indicator lights on the device exterior. The Auto option adjusts the amount of light based upon ambient conditions. Manual options include Low, Medium, and High.
1.3.6.1.4.1.43356.2.1.2.1.7INTEGER {auto(1), low(2), medium(3), high(4)}read-onlycurrent
mimosaInternalTemp
OBJECT-TYPE
The internal temperature of the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.1.8DecimalOneread-onlycurrent
mimosaRegulatoryDomain
OBJECT-TYPE
The country in which the Mimosa device has been configured to run.
1.3.6.1.4.1.43356.2.1.2.1.9DisplayString (SIZE(0..64))read-onlycurrent
mimosaLocInfo
OBJECT-IDENTITY
1.3.6.1.4.1.43356.2.1.2.2
mimosaLongitude
OBJECT-TYPE
The Longitude of the Mimosa device location, in 5 decimal points.
1.3.6.1.4.1.43356.2.1.2.2.1DecimalFiveread-onlycurrent
mimosaLatitude
OBJECT-TYPE
The Latitude of the Mimosa device location, in 5 decimal points.
1.3.6.1.4.1.43356.2.1.2.2.2DecimalFiveread-onlycurrent
mimosaAltitude
OBJECT-TYPE
The Altitude of the Mimosa device location in meters.
1.3.6.1.4.1.43356.2.1.2.2.3Integer32read-onlycurrent
mimosaSatelliteSNR
OBJECT-TYPE
The average Signal to Noise Ratio (SNR) amongst all of the satellites detected by the Mimosa device. Display is in 1 decimal point.
1.3.6.1.4.1.43356.2.1.2.2.4DecimalOneread-onlycurrent
mimosaSatelliteStrength
OBJECT-TYPE
Strength of the satellites based on the number of satellites available. It is considered good if more than 2 satellites are available.
1.3.6.1.4.1.43356.2.1.2.2.5INTEGER {good(1), bad(2)}read-onlycurrent
mimosaGPSSatellites
OBJECT-TYPE
Total number of GPS satellites detected.
1.3.6.1.4.1.43356.2.1.2.2.6Integer32read-onlycurrent
mimosaGlonassSatellites
OBJECT-TYPE
Total number of GLONASS satellites detected.
1.3.6.1.4.1.43356.2.1.2.2.7Integer32read-onlycurrent
mimosaClockAccuracy
OBJECT-TYPE
Timing signal accuracy measured in parts per billion (PPB) by the Mimosa device. Display is in 2 decimal points.
1.3.6.1.4.1.43356.2.1.2.2.8DecimalTworead-onlycurrent
mimosaWanInfo
OBJECT-IDENTITY
1.3.6.1.4.1.43356.2.1.2.3
mimosaWanSsid
OBJECT-TYPE
The wireless link name used by both radios. Both AP and Station must use the same SSID to communicate with each other.
1.3.6.1.4.1.43356.2.1.2.3.1DisplayString (SIZE(0..64))read-onlycurrent
mimosaWanMac
OBJECT-TYPE
The MAC address used for the wireless link.
1.3.6.1.4.1.43356.2.1.2.3.2PhysAddressread-onlycurrent
mimosaWanStatus
OBJECT-TYPE
The wireless link status between the Mimosa devices.
1.3.6.1.4.1.43356.2.1.2.3.3INTEGER {connected(1), disconnected(2)}read-onlycurrent
mimosaWanUpTime
OBJECT-TYPE
The wireless link up time since last reboot.
1.3.6.1.4.1.43356.2.1.2.3.4TimeTicksread-onlycurrent
mimosaTdmaInfo
OBJECT-IDENTITY
1.3.6.1.4.1.43356.2.1.2.4
mimosaWirelessMode
OBJECT-TYPE
Describes wherger the Mimosa device acts as an access point or station.
1.3.6.1.4.1.43356.2.1.2.4.1INTEGER {accessPoint(1), station(2)}read-onlycurrent
mimosaWirelessProtocol
OBJECT-TYPE
Describes the wireless protocol configured on the Mimosa device. Both TDMA and CSMA are supported. TDMA is a deterministic protocol where each device is assigned a time slot during which it is allowed to transmit. This allows for collocated radios to utilize the same channel and avoid Tx/Rx collisions and interference.
1.3.6.1.4.1.43356.2.1.2.4.2INTEGER {tdma(1), csma(2)}read-onlycurrent
mimosaTDMAMode
OBJECT-TYPE
Specifies the TDMA Gender of the radio (A or B).
1.3.6.1.4.1.43356.2.1.2.4.3INTEGER {a(1), b(2)}read-onlycurrent
mimosaTDMAWindow
OBJECT-TYPE
Specifies the length of the transmit time slot in milliseconds.
1.3.6.1.4.1.43356.2.1.2.4.4Integer32read-onlycurrent
mimosaTrafficSplit
OBJECT-TYPE
The radio can be configured to allocate bandwidth symmetrically (50/50) or asymmetrically (75/25 or 25/75) in environments where traffic direction is expected to be heavier in one direction than the other. With an asymmetrical split, the local radio is represented first in the slash notation, (local/remote). For example, in the (75/25) split, the local radio gets 75, while the remote radio gets 25. If Auto is selected the radio will automatically determine, based upon traffic flow, which ratio will be used. The radio will continue to evaluate the flow and adjust accordingly.
1.3.6.1.4.1.43356.2.1.2.4.5INTEGER {symmetric(1), asymmetric(2), auto(3)}read-onlycurrent
mimosaMgmtInfo
OBJECT-IDENTITY
1.3.6.1.4.1.43356.2.1.2.5
mimosaNetworkMode
OBJECT-TYPE
Specifies the mode for the local 2.4 GHz wireless network operation. If Auto is selected, the 2.4 GHz management network is turned on for a limited time (defined in Console Timeout ) after boot and then turned off if there is no activity. If a user associates with the radio within the timeout period, they will not be disconnected.
1.3.6.1.4.1.43356.2.1.2.5.1INTEGER {enabled(1), disabled(2), auto(3)}read-onlycurrent
mimosaRecoverySsid
OBJECT-TYPE
The recovery SSID that allows the device to be reset to factory defaults. This is available for 10 minutes after device boot. Disabling the 2.4 GHz management network will not impact availability of this option. The serial number of the device must be known in order to perform the factory reset.
1.3.6.1.4.1.43356.2.1.2.5.2DisplayString (SIZE(0..32))read-onlycurrent
mimosaLocalSsid
OBJECT-TYPE
The SSID for managing the local 2.4 GHz wireless interface.
1.3.6.1.4.1.43356.2.1.2.5.3DisplayString (SIZE(0..32))read-onlycurrent
mimosaLocalChannel
OBJECT-TYPE
The channel used for the local 2.4 GHz wireless interface.
1.3.6.1.4.1.43356.2.1.2.5.4Integer32read-onlycurrent
mimosaConsoleTimeout
OBJECT-TYPE
The amount inactivity on the 2.4 GHz wireless interface before turning it off in Auto mode.
1.3.6.1.4.1.43356.2.1.2.5.5Integer32read-onlycurrent
mimosaMaxClients
OBJECT-TYPE
The maximum number of wireless clients that can simultaneously access the 2.4 GHz management interface.
1.3.6.1.4.1.43356.2.1.2.5.6Integer32read-onlycurrent
mimosaLocalMac
OBJECT-TYPE
The MAC address used for 2.4 GHz wireless link.
1.3.6.1.4.1.43356.2.1.2.5.7PhysAddressread-onlycurrent
mimosaLocalIpAddr
OBJECT-TYPE
The IP address assigned to the 2.4 GHz wireless link.
1.3.6.1.4.1.43356.2.1.2.5.8IpAddressread-onlycurrent
mimosaLocalNetMask
OBJECT-TYPE
The IP netmask assigned to the 2.4 GHz wireless link.
1.3.6.1.4.1.43356.2.1.2.5.9IpAddressread-onlycurrent
mimosaLocalGateway
OBJECT-TYPE
The IP address of the gateway for the 2.4 GHz wireless link.
1.3.6.1.4.1.43356.2.1.2.5.10IpAddressread-onlycurrent
mimosaFlowControl
OBJECT-TYPE
Specifies whether Flow Control is enabled on the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.5.11INTEGER {enabled(1), disabled(2)}read-onlycurrent
mimosaRfInfo
OBJECT-IDENTITY
1.3.6.1.4.1.43356.2.1.2.6
mimosaChainTable
OBJECT-TYPE
A list of RF chain entries, which is part of MIMO tables. MIMO stands for Multiple In Multiple Out.
1.3.6.1.4.1.43356.2.1.2.6.1not-accessiblecurrent
mimosaChainEntry
OBJECT-TYPE
An entry containing chain information applicable to a particular RF chain.
1.3.6.1.4.1.43356.2.1.2.6.1.1not-accessiblecurrent
mimosaChain
OBJECT-TYPE
An index which is used to access a particular entry in the chain table.
1.3.6.1.4.1.43356.2.1.2.6.1.1.1Integer32 (0..65535)not-accessiblecurrent
mimosaTxPower
OBJECT-TYPE
Specifies the transmit power of the given RF chain. A value of -8 means this particular TxChain is not a valid entry.
1.3.6.1.4.1.43356.2.1.2.6.1.1.2DecimalOneread-onlycurrent
mimosaRxPower
OBJECT-TYPE
Specifies the receive power of the given RF chain. A value of -100 means this particular RxChain is not a valid entry (SNR must be -100).
1.3.6.1.4.1.43356.2.1.2.6.1.1.3DecimalOneread-onlycurrent
mimosaRxNoise
OBJECT-TYPE
Specifies the received noise level for the given RF chain.
1.3.6.1.4.1.43356.2.1.2.6.1.1.4DecimalOneread-onlycurrent
mimosaSNR
OBJECT-TYPE
Indicates the Signal to Noise Ratio (SNR) for the given RF chain. A value of -100 means this particular RxChain is not a valid entry.
1.3.6.1.4.1.43356.2.1.2.6.1.1.5DecimalOneread-onlycurrent
mimosaCenterFreq
OBJECT-TYPE
The center frequency for the given RF chain. A value of 0 means this particular Chain is not a valid entry.
1.3.6.1.4.1.43356.2.1.2.6.1.1.6Integer32read-onlycurrent
mimosaPolarization
OBJECT-TYPE
The ploarization of the given RF chain. It could be horizontal or vertical.
1.3.6.1.4.1.43356.2.1.2.6.1.1.7INTEGER {horizontal(1), vertical(2)}read-onlycurrent
mimosaStreamTable
OBJECT-TYPE
A list of data stream entries, which are part of MIMO tables. MIMO stands for Multiple In Multiple Out.
1.3.6.1.4.1.43356.2.1.2.6.2not-accessiblecurrent
mimosaStreamEntry
OBJECT-TYPE
The entry containing information applicable to a particular stream.
1.3.6.1.4.1.43356.2.1.2.6.2.1not-accessiblecurrent
mimosaStream
OBJECT-TYPE
The index used to access a particular entry in the stream table.
1.3.6.1.4.1.43356.2.1.2.6.2.1.1Integer32 (0..65535)not-accessiblecurrent
mimosaTxPhy
OBJECT-TYPE
Specifies the transmit rate of the given data stream.
1.3.6.1.4.1.43356.2.1.2.6.2.1.2Integer32read-onlycurrent
mimosaTxMCS
OBJECT-TYPE
Specifies the transmit MCS of the given data stream. A value of -1 means this particular TxStream is not a valid entry.
1.3.6.1.4.1.43356.2.1.2.6.2.1.3Integer32read-onlycurrent
mimosaTxWidth
OBJECT-TYPE
Specifies the channel width based on MCS. A value of -1 means this particular TxWidth is not a valid entry
1.3.6.1.4.1.43356.2.1.2.6.2.1.4Integer32read-onlycurrent
mimosaRxPhy
OBJECT-TYPE
Specifies the receive rate of the given data stream.
1.3.6.1.4.1.43356.2.1.2.6.2.1.5Integer32read-onlycurrent
mimosaRxMCS
OBJECT-TYPE
Specifies the receive MCS of the given data stream. A value of -1 means this particular RxStream is not a valid entry.
1.3.6.1.4.1.43356.2.1.2.6.2.1.6Integer32read-onlycurrent
mimosaRxWidth
OBJECT-TYPE
Specifies the receive Rx Width of the given data stream. A value of -1 means this particular RxWidth is not a valid entry.
1.3.6.1.4.1.43356.2.1.2.6.2.1.7Integer32read-onlycurrent
mimosaRxEVM
OBJECT-TYPE
Specifies the receive Error Vector Magnitude (EVM) of the given data stream.
1.3.6.1.4.1.43356.2.1.2.6.2.1.8DecimalOneread-onlycurrent
mimosaChannelTable
OBJECT-TYPE
A list of RF channel entries on the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.6.3not-accessiblecurrent
mimosaChannelEntry
OBJECT-TYPE
The entry containing management information applicable to a particular channel.
1.3.6.1.4.1.43356.2.1.2.6.3.1not-accessiblecurrent
mimosaChannel
OBJECT-TYPE
The index used to access a particular entry in the RF channel table.
1.3.6.1.4.1.43356.2.1.2.6.3.1.1Integer32 (0..65535)not-accessiblecurrent
mimosaChannelMode
OBJECT-TYPE
Specifies the mode for the given channel. The transmit or receive values indicate Frequency Diversity (FD) mode is in use. The bidirectional value means that the channel is used for both transmit and receive in all other single or dual channel modes.
1.3.6.1.4.1.43356.2.1.2.6.3.1.2INTEGER {transmit(1), receive(2), bidirectional(3)}read-onlycurrent
mimosaChannelWidth
OBJECT-TYPE
Specifies the channel width of the given channel.
1.3.6.1.4.1.43356.2.1.2.6.3.1.3Integer32read-onlycurrent
mimosaChannelTxPower
OBJECT-TYPE
Specifies the transmit power level on the channel. If Channel Width is set to 1xN MHz, Channel 2 is not be used. In Frequency Diversity mode, Power 1 and Power 2 represent transmit power on the local and remote sides, respectively.
1.3.6.1.4.1.43356.2.1.2.6.3.1.4Integer32read-onlycurrent
mimosaChannelCenterFreq
OBJECT-TYPE
Specifies the center frequency of the channel used on the link. In all modes, the center frequency represents the absolute center of the selected channel width without any offset, and the center can be moved in 5 MHz increments. A value of 0 means this particular channel is not a valid entry.
1.3.6.1.4.1.43356.2.1.2.6.3.1.5Integer32read-onlycurrent
mimosaAntennaGain
OBJECT-TYPE
The antenna gain on the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.6.4Integer32read-onlycurrent
mimosaTotalTxPower
OBJECT-TYPE
The total transmit power for all the channels on the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.6.5DecimalOneread-onlycurrent
mimosaTotalRxPower
OBJECT-TYPE
The total receive power for all the channels on the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.6.6DecimalOneread-onlycurrent
mimosaTargetSignalStrength
OBJECT-TYPE
The calculated target receive signal strength based on device coordinates and settings.
1.3.6.1.4.1.43356.2.1.2.6.7Integer32read-onlycurrent
mimosaPerfInfo
OBJECT-IDENTITY
1.3.6.1.4.1.43356.2.1.2.7
mimosaPhyTxRate
OBJECT-TYPE
The transmit packet rate at the physical level over a 5 second interval.
1.3.6.1.4.1.43356.2.1.2.7.1DecimalTworead-onlycurrent
mimosaPhyRxRate
OBJECT-TYPE
The receive packet rate at the physical level over a 5 second interval.
1.3.6.1.4.1.43356.2.1.2.7.2DecimalTworead-onlycurrent
mimosaPerTxRate
OBJECT-TYPE
The trasnmit Packet Error Rate (PER) over a 5 second interval. It is caluculated as packets with errors versuss packets without errors.
1.3.6.1.4.1.43356.2.1.2.7.3DecimalTworead-onlycurrent
mimosaPerRxRate
OBJECT-TYPE
The receive Packet Error Rate (PER) over a 5 second interval. It is caluculated as packets with errors versuss packets without errors.
1.3.6.1.4.1.43356.2.1.2.7.4DecimalTworead-onlycurrent
mimosaServices
OBJECT-IDENTITY
1.3.6.1.4.1.43356.2.1.2.8
mimosaHttpsEnabled
OBJECT-TYPE
Specifies whether HTTPS is enabled on the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.8.1INTEGER {enabled(1), disabled(2)}read-onlycurrent
mimosaMgmtVlanEnabled
OBJECT-TYPE
Specifies whether the Management VLAN is enabled on the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.8.2INTEGER {enabled(1), disabled(2)}read-onlycurrent
mimosaMgmtCloudEnabled
OBJECT-TYPE
Specifies whether the Management Cloud is enabled on the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.8.3INTEGER {enabled(1), disabled(2)}read-onlycurrent
mimosaRestMgmtEnabled
OBJECT-TYPE
Specifies whether the REST management is enabled on the Mimosa device.
1.3.6.1.4.1.43356.2.1.2.8.4INTEGER {enabled(1), disabled(2)}read-onlycurrent
mimosaPingWatchdogEnabled
OBJECT-TYPE
Specifies whether the IP Ping watchdog is enabled on the Mimosa device. This is used to reset the device if a configured IP address is not reached in certain number of retries.
1.3.6.1.4.1.43356.2.1.2.8.5INTEGER {enabled(1), disabled(2)}read-onlycurrent
mimosaSyslogEnabled
OBJECT-TYPE
Specifies whether the Syslog client is enabled on the Mimosa device. Syslog client sends the log messages to configured syslog server.
1.3.6.1.4.1.43356.2.1.2.8.6INTEGER {enabled(1), disabled(2)}read-onlycurrent
mimosaNtpMode
OBJECT-TYPE
Specifies whether the NTP client is configured to use standard servers from NIST, NTP organizations or custom NTP server.
1.3.6.1.4.1.43356.2.1.2.8.7INTEGER {custom(1), standard(2)}read-onlycurrent
mimosaNtpServer
OBJECT-TYPE
Specifies the name or address of the custom NTP server.
1.3.6.1.4.1.43356.2.1.2.8.8DisplayString (SIZE(0..64))read-onlycurrent