MIBs Depot

METRO1500-MIB

Registered at
1.3.6.1.4.1.2544.1.3
Namespace
adva
Source file
METRO1500-MIB
Digest
sha256:ceffc1e41a3347e7e53b5272aa088eccd99b9f9dcd2d8218cd78d2f31380f8ba

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

METRO1500-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
org
OBJECT-IDENTITY
1.3
dod
OBJECT-IDENTITY
1.3.6
internet
OBJECT-IDENTITY
1.3.6.1
private
OBJECT-IDENTITY
1.3.6.1.4
enterprises
OBJECT-IDENTITY
1.3.6.1.4.1
adva
OBJECT-IDENTITY
1.3.6.1.4.1.2544
advaProducts
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1
metro1500
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.3
metro1500Main
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.3.1
metro1500Housing
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.3.1.1
metro1500Manufacturer
OBJECT-TYPE
Manufacturer of the METRO1500 System
1.3.6.1.4.1.2544.1.3.1.1.1DisplayStringread-onlymandatory
metro1500MainType
OBJECT-TYPE
Type of the METRO1500 System
1.3.6.1.4.1.2544.1.3.1.1.2DisplayStringread-onlymandatory
metro1500MainSerialNumber
OBJECT-TYPE
Serial Number of the METRO1500 System
1.3.6.1.4.1.2544.1.3.1.1.3DisplayStringread-onlymandatory
metro1500MainHardwareVersion
OBJECT-TYPE
Hardware Version of the METRO1500 System
1.3.6.1.4.1.2544.1.3.1.1.4DisplayStringread-onlymandatory
metro1500MainSoftwareVersion
OBJECT-TYPE
Software Version of the METRO1500 System (Device Master).
1.3.6.1.4.1.2544.1.3.1.1.5DisplayStringread-onlymandatory
metro1500MainBusMessages
OBJECT-TYPE
Number of received internal Messages. This Number gives Information on the internal Activity of the METRO1500 System. This should be a large integer Number except when the System has just started. The Value is updated every five Seconds.
1.3.6.1.4.1.2544.1.3.1.1.6INTEGERread-onlymandatory
metro1500MainBusErrors
OBJECT-TYPE
Number of dropped received internal Messages. This value should be 0 or a very small Integer.
1.3.6.1.4.1.2544.1.3.1.1.7INTEGERread-onlymandatory
metro1500MainLastEvent
OBJECT-TYPE
Since SNMP Traps are not reliable, this Number can be polled periodically. The Value is set to a nonzero Integer when an Event occurs and cleared ten Minutes after the last Event.
1.3.6.1.4.1.2544.1.3.1.1.8INTEGER (0..65535)read-onlymandatory
metro1500MainMotd
OBJECT-TYPE
Message Of The Day is the greeting when login via telnet. It shows the actual Kernel Version and the Software Update State. With the MOTD you get Information on the actual installed Software Packets.
1.3.6.1.4.1.2544.1.3.1.1.9DisplayStringread-onlymandatory
metro1500MainTrapsinkTable
OBJECT-TYPE
Table of Trapsinks
1.3.6.1.4.1.2544.1.3.1.1.10not-accessiblemandatory
metro1500MainTrapsinkEntry
OBJECT-TYPE
Entries in the Trapsink Table
1.3.6.1.4.1.2544.1.3.1.1.10.1not-accessiblemandatory
metro1500MainTrapsinkNumber
OBJECT-TYPE
Number of Trapsink
1.3.6.1.4.1.2544.1.3.1.1.10.1.1INTEGER (1..10)read-onlymandatory
metro1500MainTrapsinkAddress
OBJECT-TYPE
IP Address of the Management System which should receive SNMP Traps. The Logfiles are also shown in this Table
1.3.6.1.4.1.2544.1.3.1.1.10.1.2DisplayStringread-onlymandatory
metro1500MainTrapsinkCommunity
OBJECT-TYPE
Community String which is sent with a SNMP Trap to the Management Station
1.3.6.1.4.1.2544.1.3.1.1.10.1.3DisplayStringread-onlymandatory
metro1500MainTrapsinkPriority
OBJECT-TYPE
Priority of the Trapsink (lower level gets less Traps)
1.3.6.1.4.1.2544.1.3.1.1.10.1.4INTEGER (1..20)read-onlymandatory
metro1500MainLogfileTable
OBJECT-TYPE
Table of Log Files
1.3.6.1.4.1.2544.1.3.1.1.11not-accessiblemandatory
metro1500MainLogfileEntry
OBJECT-TYPE
Entries in the Logfile Table
1.3.6.1.4.1.2544.1.3.1.1.11.1not-accessiblemandatory
metro1500MainLogfileNumber
OBJECT-TYPE
Number of Logfile
1.3.6.1.4.1.2544.1.3.1.1.11.1.1INTEGER (1..2)read-onlymandatory
metro1500MainLogfileName
OBJECT-TYPE
Name of Logfile
1.3.6.1.4.1.2544.1.3.1.1.11.1.2DisplayStringread-onlymandatory
metro1500MainLogfileSize
OBJECT-TYPE
Size of Logfile
1.3.6.1.4.1.2544.1.3.1.1.11.1.3INTEGERread-onlymandatory
metro1500MainLogfilePriority
OBJECT-TYPE
Priority of Logfile
1.3.6.1.4.1.2544.1.3.1.1.11.1.4INTEGER (1..20)read-onlymandatory
metro1500SlotTable
OBJECT-TYPE
Table of installed METRO1500 Components. Since METRO1500 can handle many different Components, in this Section only the common Information is displayed. Component specific Information is stored in different Subtrees.
1.3.6.1.4.1.2544.1.3.1.2not-accessiblemandatory
metro1500SlotEntry
OBJECT-TYPE
Installed METRO1500 Components
1.3.6.1.4.1.2544.1.3.1.2.1not-accessiblemandatory
metro1500SlotNumber
OBJECT-TYPE
Slot Number of installed Component. The Device Master has always Slot Number 0 and is shown in the Main section.
1.3.6.1.4.1.2544.1.3.1.2.1.1INTEGER (1..79)read-onlymandatory
metro1500Type
OBJECT-TYPE
Type of installed Component
1.3.6.1.4.1.2544.1.3.1.2.1.2DisplayStringread-onlymandatory
metro1500SlotTypeNumber
OBJECT-TYPE
Integer Number between 0 and 255 unique for a specific type of installed Component. This Number can be used for management Systems to handle automatically the different Options of installed Components.
1.3.6.1.4.1.2544.1.3.1.2.1.3INTEGER {metro1500Converter(1), metro1000Converter(2), metro1000EthernetConverter(3), metro1500-2-5GbConverter(5), metro1500-TRL-Converter(7), metro1500-4PortTDMCard(10), nemi(32), demi(33), metro1500-EthernetHubCard(39), switch(64), other(255)}read-onlymandatory
metro1500SerialNumber
OBJECT-TYPE
Serial Number of installed Component
1.3.6.1.4.1.2544.1.3.1.2.1.4DisplayStringread-onlymandatory
metro1500HardwareVersion
OBJECT-TYPE
Hardware Version of installed Component
1.3.6.1.4.1.2544.1.3.1.2.1.5DisplayStringread-onlymandatory
metro1500SoftwareVersion
OBJECT-TYPE
SoftwareVersion of installed Component
1.3.6.1.4.1.2544.1.3.1.2.1.6DisplayStringread-onlymandatory
metro1500Temperature
OBJECT-TYPE
Temperature of installed Component in Celsius
1.3.6.1.4.1.2544.1.3.1.2.1.7INTEGERread-onlymandatory
metro1500BoardVoltage
OBJECT-TYPE
Voltage measured directly on the board in mV
1.3.6.1.4.1.2544.1.3.1.2.1.8INTEGERread-onlymandatory
metro1500DetailInfo
OBJECT-TYPE
A Reference to the MIB Definition where the special Options of the Component are described with more Details
1.3.6.1.4.1.2544.1.3.1.2.1.9OBJECT IDENTIFIERread-onlymandatory
metro1500EPLDVersion
OBJECT-TYPE
Software Version on the programmable Logic Circuit
1.3.6.1.4.1.2544.1.3.1.2.1.10INTEGER (0..255)read-onlymandatory
metro1500PSTable
OBJECT-TYPE
Table of installed Power Supplies
1.3.6.1.4.1.2544.1.3.1.3not-accessiblemandatory
metro1500PSEntry
OBJECT-TYPE
Installed METRO1500 Power Supplies
1.3.6.1.4.1.2544.1.3.1.3.1not-accessiblemandatory
metro1500PSNumber
OBJECT-TYPE
Number of installed Power Supply
1.3.6.1.4.1.2544.1.3.1.3.1.1INTEGER (1..32)read-onlymandatory
metro1500PSOn
OBJECT-TYPE
Is installed Power Supply On or Off
1.3.6.1.4.1.2544.1.3.1.3.1.2INTEGER {on(1), off(2)}read-onlymandatory
metro1500FanTable
OBJECT-TYPE
Table of installed Fans
1.3.6.1.4.1.2544.1.3.1.4not-accessiblemandatory
metro1500FanEntry
OBJECT-TYPE
Installed METRO1500 Fans
1.3.6.1.4.1.2544.1.3.1.4.1not-accessiblemandatory
metro1500FanNumber
OBJECT-TYPE
Number of installed Fan
1.3.6.1.4.1.2544.1.3.1.4.1.1INTEGER (1..16)read-onlymandatory
metro1500FanOn
OBJECT-TYPE
Is installed Fan On or Off
1.3.6.1.4.1.2544.1.3.1.4.1.2INTEGER {on(1), off(2)}read-onlymandatory
metro1500Converter
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.3.5
metro1500ConverterTable
OBJECT-TYPE
Table of installed METRO1500 Converters
1.3.6.1.4.1.2544.1.3.5.1not-accessiblemandatory
metro1500ConverterEntry
OBJECT-TYPE
Installed METRO1500 Converters
1.3.6.1.4.1.2544.1.3.5.1.1not-accessiblemandatory
metro1500ConverterNumber
OBJECT-TYPE
Slot Number of installed Converter Card
1.3.6.1.4.1.2544.1.3.5.1.1.1INTEGER (1..79)read-onlymandatory
metro1500RxLoc
OBJECT-TYPE
Local Receiver has Signal (On) or Loss of Signal (Off)
1.3.6.1.4.1.2544.1.3.5.1.1.2INTEGER {on(1), off(2)}read-onlymandatory
metro1500TxLoc
OBJECT-TYPE
Local Transmitter is On or Off
1.3.6.1.4.1.2544.1.3.5.1.1.3INTEGER {on(1), off(2), alwaysOn(3), alwaysOff(4)}read-onlymandatory
metro1500TxLocC
OBJECT-TYPE
Current of the local Transmitter in mA. This Entry is only available if a Current Sensor is installed
1.3.6.1.4.1.2544.1.3.5.1.1.4INTEGER (0..200)read-onlymandatory
metro1500TxLocTemp
OBJECT-TYPE
Temperature of the local Transmitter in Celsius. This Entry is only available if the Laser is cooled
1.3.6.1.4.1.2544.1.3.5.1.1.5INTEGER (-50..100)read-onlymandatory
metro1500RxRem
OBJECT-TYPE
Remote Receiver has Signal (On) or Loss of Signal (Off)
1.3.6.1.4.1.2544.1.3.5.1.1.6INTEGER {on(1), off(2)}read-onlymandatory
metro1500TxRem
OBJECT-TYPE
Remote Transmitter is On or Off
1.3.6.1.4.1.2544.1.3.5.1.1.7INTEGER {on(1), off(2), alwaysOn(3), alwaysOff(4)}read-onlymandatory
metro1500TxRemC
OBJECT-TYPE
Current of the Remote Transmitter in Milli Ampere. This Entry is only available if a Current Sensor is installed
1.3.6.1.4.1.2544.1.3.5.1.1.8INTEGER (0..200)read-onlymandatory
metro1500TxRemTemp
OBJECT-TYPE
Temperature of the Remote Transmitter in Celsius This Entry is only available if the Laser is cooled
1.3.6.1.4.1.2544.1.3.5.1.1.9INTEGER (-50..100)read-onlymandatory
metro1500RxRem2
OBJECT-TYPE
2nd Remote receiver has Signal (On) or Loss of Signal (Off). (Only available if a 2nd Remote Receiver is installed)
1.3.6.1.4.1.2544.1.3.5.1.1.10INTEGER {on(1), off(2)}read-onlymandatory
metro1500ClockState
OBJECT-TYPE
Status of the Clock. This Entry is only available if a Clock is installed. If the Clock is enabled, and has an error output, and cannot synchronize to the Signal, the Clock fails.
1.3.6.1.4.1.2544.1.3.5.1.1.11INTEGER {on(1), off(2), fail(3)}read-onlymandatory
metro1500ClockFreq
OBJECT-TYPE
Frequency of the Clock in MBit/s. Only available if a Clock is installed.
1.3.6.1.4.1.2544.1.3.5.1.1.12INTEGERread-onlymandatory
metro1500LocLoop
OBJECT-TYPE
Local Loop is set to On or to Off
1.3.6.1.4.1.2544.1.3.5.1.1.13INTEGER {on(1), off(2)}read-onlymandatory
metro1500RemLoop
OBJECT-TYPE
Remote Loop is set to On or to Off
1.3.6.1.4.1.2544.1.3.5.1.1.14INTEGER {on(1), off(2)}read-onlymandatory
metro1500ClockType
OBJECT-TYPE
Type of the Clock. Only available, if a Clock is installed.
1.3.6.1.4.1.2544.1.3.5.1.1.15INTEGER {multiClockLSModule(1), multiClockLS(2), multiClockFCGbE(3), multiClockOCxGbE(5), multiClockOCxFC(7), multiClockOCxGbEFC(9), multiClockFCGbEOnBoard(11), fixedClock125MbpsModule(21), fixedClock125Mbps(22), fixedClock155MbpsModule(31), fixedClock155Mbps(32), fixedClock200MbpsModule(41), fixedClock200Mbps(42), fixedClock266MbpsModule(51), fixedClock266Mbps(52), fixedClock622MbpsModule(61), fixedClock622Mbps(62), fixedClock1062MbpsModule(71), fixedClock1062Mbps(72), fixedClock1250MbpsModule(75), fixedClock1250Mbps(76), fixedClock2500MbpsModule(81), fixedClock2500Mbps(82), other(255)}read-onlymandatory
metro1500Switch
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.3.10
metro1500SwitchTable
OBJECT-TYPE
Table of installed METRO1500 Switches
1.3.6.1.4.1.2544.1.3.10.1not-accessiblemandatory
metro1500SwitchEntry
OBJECT-TYPE
Installed METRO1500 Switches
1.3.6.1.4.1.2544.1.3.10.1.1not-accessiblemandatory
metro1500SwitchNumber
OBJECT-TYPE
Slot Number of installed Remote Optical Switch Card
1.3.6.1.4.1.2544.1.3.10.1.1.1INTEGER (1..79)read-onlymandatory
metro1500SwitchLine
OBJECT-TYPE
Active Line of Remote Optical Switch
1.3.6.1.4.1.2544.1.3.10.1.1.2INTEGER {lineA(1), lineB(2)}read-onlymandatory
metro1500SwitchMode
OBJECT-TYPE
Mode of Transmit Line of Remote Optical Switch
1.3.6.1.4.1.2544.1.3.10.1.1.3INTEGER {automatic(1), locked(2)}read-onlymandatory
metro1500SwitchLaserOn
OBJECT-TYPE
Shows if the reference Laser is On or Off
1.3.6.1.4.1.2544.1.3.10.1.1.4INTEGER {on(1), off(2)}read-onlymandatory
metro1500SwitchLineAavail
OBJECT-TYPE
Is Line A of Remote Optical Switch available?
1.3.6.1.4.1.2544.1.3.10.1.1.5INTEGER {available(1), notAvailable(2)}read-onlymandatory
metro1500SwitchLineBavail
OBJECT-TYPE
Is Line B of Remote Optical Switch available
1.3.6.1.4.1.2544.1.3.10.1.1.6INTEGER {available(1), notAvailable(2)}read-onlymandatory
metro1500EthernetHub
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.3.14
metro1500EthernetHubTable
OBJECT-TYPE
Table of installed FSP-II Hub Cards
1.3.6.1.4.1.2544.1.3.14.1not-accessiblemandatory
metro1500EthernetHubEntry
OBJECT-TYPE
Installed FSP-II Hub Cards
1.3.6.1.4.1.2544.1.3.14.1.1not-accessiblemandatory
metro1500EthernetHubNumber
OBJECT-TYPE
Slot Number of installed Hub Card
1.3.6.1.4.1.2544.1.3.14.1.1.1INTEGER (1..79)read-onlymandatory
metro1500EthernetHubPortEnable1
OBJECT-TYPE
is Hub Port 1 enabled ?
1.3.6.1.4.1.2544.1.3.14.1.1.10INTEGER {enable(1), disable(2)}read-onlymandatory
metro1500EthernetHubPortPartitionStatus1
OBJECT-TYPE
is Port 1 partitioned ?
1.3.6.1.4.1.2544.1.3.14.1.1.11INTEGER {partitioned(1), notPartitioned(2)}read-onlymandatory
metro1500EthernetHubPortLinkStatus1
OBJECT-TYPE
does Port 1 receive Link Pulses ?
1.3.6.1.4.1.2544.1.3.14.1.1.12INTEGER {linked(1), notLinked(2)}read-onlymandatory
metro1500EthernetHubPortPolarity1
OBJECT-TYPE
polarity of input signal at Port 1
1.3.6.1.4.1.2544.1.3.14.1.1.13INTEGER {positive(1), negative(2)}read-onlymandatory
metro1500EthernetHubPortEnable2
OBJECT-TYPE
is Hub Port 2 enabled ?
1.3.6.1.4.1.2544.1.3.14.1.1.20INTEGER {enable(1), disable(2)}read-onlymandatory
metro1500EthernetHubPortPartitionStatus2
OBJECT-TYPE
is Port 2 partitioned ?
1.3.6.1.4.1.2544.1.3.14.1.1.21INTEGER {partitioned(1), notPartitioned(2)}read-onlymandatory
metro1500EthernetHubPortLinkStatus2
OBJECT-TYPE
does Port 2 receive Link Pulses ?
1.3.6.1.4.1.2544.1.3.14.1.1.22INTEGER {linked(1), notLinked(2)}read-onlymandatory
metro1500EthernetHubPortPolarity2
OBJECT-TYPE
polarity of input signal at Port 2
1.3.6.1.4.1.2544.1.3.14.1.1.23INTEGER {positive(1), negative(2)}read-onlymandatory
metro1500EthernetHubPortEnable3
OBJECT-TYPE
is Hub Port 3 enabled ?
1.3.6.1.4.1.2544.1.3.14.1.1.30INTEGER {enable(1), disable(2)}read-onlymandatory
metro1500EthernetHubPortPartitionStatus3
OBJECT-TYPE
is Port 3 partitioned ?
1.3.6.1.4.1.2544.1.3.14.1.1.31INTEGER {partitioned(1), notPartitioned(2)}read-onlymandatory
metro1500EthernetHubPortLinkStatus3
OBJECT-TYPE
does Port 3 receive Link Pulses ?
1.3.6.1.4.1.2544.1.3.14.1.1.32INTEGER {linked(1), notLinked(2)}read-onlymandatory
metro1500EthernetHubPortPolarity3
OBJECT-TYPE
polarity of input signal at Port 3
1.3.6.1.4.1.2544.1.3.14.1.1.33INTEGER {positive(1), negative(2)}read-onlymandatory
metro1500EthernetHubPortEnable4
OBJECT-TYPE
is Hub Port 4 enabled ?
1.3.6.1.4.1.2544.1.3.14.1.1.40INTEGER {enable(1), disable(2)}read-onlymandatory
metro1500EthernetHubPortPartitionStatus4
OBJECT-TYPE
is Port 4 partitioned ?
1.3.6.1.4.1.2544.1.3.14.1.1.41INTEGER {partitioned(1), notPartitioned(2)}read-onlymandatory
metro1500EthernetHubPortLinkStatus4
OBJECT-TYPE
does Port 4 receive Link Pulses ?
1.3.6.1.4.1.2544.1.3.14.1.1.42INTEGER {linked(1), notLinked(2)}read-onlymandatory
metro1500EthernetHubPortPolarity4
OBJECT-TYPE
polarity of input signal at Port 4
1.3.6.1.4.1.2544.1.3.14.1.1.43INTEGER {positive(1), negative(2)}read-onlymandatory
metro1500EthernetHubPortEnable5
OBJECT-TYPE
is Hub Port 5 enabled ?
1.3.6.1.4.1.2544.1.3.14.1.1.50INTEGER {enable(1), disable(2)}read-onlymandatory
metro1500EthernetHubPortPartitionStatus5
OBJECT-TYPE
is Port 5 partitioned ?
1.3.6.1.4.1.2544.1.3.14.1.1.51INTEGER {partitioned(1), notPartitioned(2)}read-onlymandatory
metro1500EthernetHubPortLinkStatus5
OBJECT-TYPE
does Port 5 receive Link Pulses ?
1.3.6.1.4.1.2544.1.3.14.1.1.52INTEGER {linked(1), notLinked(2)}read-onlymandatory
metro1500EthernetHubPortPolarity5
OBJECT-TYPE
polarity of input signal at Port 5
1.3.6.1.4.1.2544.1.3.14.1.1.53INTEGER {positive(1), negative(2)}read-onlymandatory
metro1500TDM
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.3.15
metro1500TDMTable
OBJECT-TYPE
Table of installed FSP-II TDM Cards
1.3.6.1.4.1.2544.1.3.15.1not-accessiblemandatory
metro1500TDMEntry
OBJECT-TYPE
Installed FSP-II TDM Cards
1.3.6.1.4.1.2544.1.3.15.1.1not-accessiblemandatory
metro1500TDMNumber
OBJECT-TYPE
Slot Number of installed TDM Card
1.3.6.1.4.1.2544.1.3.15.1.1.1INTEGER (1..79)read-onlymandatory
metro1500TDMRxRem
OBJECT-TYPE
Does the remote receiver receive Light (on) or not (off)?
1.3.6.1.4.1.2544.1.3.15.1.1.4INTEGER {on(1), off(2)}read-onlymandatory
metro1500TDMRxSync
OBJECT-TYPE
Is the input signal synchronized with the corresponding TDM card?
1.3.6.1.4.1.2544.1.3.15.1.1.5INTEGER {sync(1), noSync(2)}read-onlymandatory
metro1500TDMTxRem
OBJECT-TYPE
State of the Remote Transmitter
1.3.6.1.4.1.2544.1.3.15.1.1.6INTEGER {on(1), off(2), alwaysOn(3), alwaysOff(4)}read-onlymandatory
metro1500TDMTxRemC
OBJECT-TYPE
Current of the remote Transmitter in mA
1.3.6.1.4.1.2544.1.3.15.1.1.7INTEGER (0..200)read-onlymandatory
metro1500TDMTxRemTemp
OBJECT-TYPE
Temperature of the remote Transmitter in Celsius
1.3.6.1.4.1.2544.1.3.15.1.1.8INTEGER (-50..100)read-onlymandatory
metro1500TDMLocLoop
OBJECT-TYPE
Loop for all Local Inputs enabled (on) or disabled (off)
1.3.6.1.4.1.2544.1.3.15.1.1.9INTEGER {on(1), off(2)}read-onlymandatory
metro1500TDMLocModuleInst1
OBJECT-TYPE
is local Module 1 installed ?
1.3.6.1.4.1.2544.1.3.15.1.1.20INTEGER {installed(1), notInstalled(2)}read-onlymandatory
metro1500TDMLocModuleEnable1
OBJECT-TYPE
is local Module 1 enabled ?
1.3.6.1.4.1.2544.1.3.15.1.1.21INTEGER {enabled(1), notEnabled(2)}read-onlymandatory
metro1500TDMLocModuleRx1
OBJECT-TYPE
local receiver 1 gets signal (on)
1.3.6.1.4.1.2544.1.3.15.1.1.22INTEGER {on(1), off(2)}read-onlymandatory
metro1500TDMLocModuleTx1
OBJECT-TYPE
state of the local transmitter
1.3.6.1.4.1.2544.1.3.15.1.1.23INTEGER {on(1), off(2), alwaysOn(3), alwaysOff(4)}read-onlymandatory
metro1500TDMLocModuleRemoteData1
OBJECT-TYPE
receiving data for this module from the remote side
1.3.6.1.4.1.2544.1.3.15.1.1.24INTEGER {data(1), noData(2)}read-onlymandatory
metro1500TDMLocModuleClockFrequency1
OBJECT-TYPE
data rate of the clock installed on local Module 1 in MBit/s
1.3.6.1.4.1.2544.1.3.15.1.1.25INTEGERread-onlymandatory
metro1500TDMLocModuleClockError1
OBJECT-TYPE
data rate and clock frequency are not synchronized
1.3.6.1.4.1.2544.1.3.15.1.1.26INTEGER {error(1), noError(2)}read-onlymandatory
metro1500TDMLocModuleInst2
OBJECT-TYPE
is local Module 2 installed ?
1.3.6.1.4.1.2544.1.3.15.1.1.30INTEGER {installed(1), notInstalled(2)}read-onlymandatory
metro1500TDMLocModuleEnable2
OBJECT-TYPE
is local Module 2 enabled ?
1.3.6.1.4.1.2544.1.3.15.1.1.31INTEGER {enabled(1), notEnabled(2)}read-onlymandatory
metro1500TDMLocModuleRx2
OBJECT-TYPE
local receiver 2 gets signal (on)
1.3.6.1.4.1.2544.1.3.15.1.1.32INTEGER {on(1), off(2)}read-onlymandatory
metro1500TDMLocModuleTx2
OBJECT-TYPE
state of the local transmitter
1.3.6.1.4.1.2544.1.3.15.1.1.33INTEGER {on(1), off(2), alwaysOn(3), alwaysOff(4)}read-onlymandatory
metro1500TDMLocModuleRemoteData2
OBJECT-TYPE
receiving data for this module from the remote side
1.3.6.1.4.1.2544.1.3.15.1.1.34INTEGER {data(1), noData(2)}read-onlymandatory
metro1500TDMLocModuleClockFrequency2
OBJECT-TYPE
data rate of the clock installed on local Module 2 in MBit/s
1.3.6.1.4.1.2544.1.3.15.1.1.35INTEGERread-onlymandatory
metro1500TDMLocModuleClockError2
OBJECT-TYPE
data rate and clock frequency are not synchronized
1.3.6.1.4.1.2544.1.3.15.1.1.36INTEGER {error(1), noError(2)}read-onlymandatory
metro1500TDMLocModuleInst3
OBJECT-TYPE
is local Module 3 installed ?
1.3.6.1.4.1.2544.1.3.15.1.1.40INTEGER {installed(1), notInstalled(2)}read-onlymandatory
metro1500TDMLocModuleEnable3
OBJECT-TYPE
is local Module 3 enabled ?
1.3.6.1.4.1.2544.1.3.15.1.1.41INTEGER {enabled(1), notEnabled(2)}read-onlymandatory
metro1500TDMLocModuleRx3
OBJECT-TYPE
local receiver 3 gets signal (on)
1.3.6.1.4.1.2544.1.3.15.1.1.42INTEGER {on(1), off(2)}read-onlymandatory
metro1500TDMLocModuleTx3
OBJECT-TYPE
state of the local transmitter
1.3.6.1.4.1.2544.1.3.15.1.1.43INTEGER {on(1), off(2), alwaysOn(3), alwaysOff(4)}read-onlymandatory
metro1500TDMLocModuleRemoteData3
OBJECT-TYPE
receiving data for this module from the remote side
1.3.6.1.4.1.2544.1.3.15.1.1.44INTEGER {data(1), noData(2)}read-onlymandatory
metro1500TDMLocModuleClockFrequency3
OBJECT-TYPE
data rate of the clock installed on local Module 3 in MBit/s
1.3.6.1.4.1.2544.1.3.15.1.1.45INTEGERread-onlymandatory
metro1500TDMLocModuleClockError3
OBJECT-TYPE
data rate and clock frequency are not synchronized
1.3.6.1.4.1.2544.1.3.15.1.1.46INTEGER {error(1), noError(2)}read-onlymandatory
metro1500TDMLocModuleInst4
OBJECT-TYPE
is local Module 4 installed ?
1.3.6.1.4.1.2544.1.3.15.1.1.50INTEGER {installed(1), notInstalled(2)}read-onlymandatory
metro1500TDMLocModuleEnable4
OBJECT-TYPE
is local Module 4 enabled ?
1.3.6.1.4.1.2544.1.3.15.1.1.51INTEGER {enabled(1), notEnabled(2)}read-onlymandatory
metro1500TDMLocModuleRx4
OBJECT-TYPE
local receiver 4 gets signal (on)
1.3.6.1.4.1.2544.1.3.15.1.1.52INTEGER {on(1), off(2)}read-onlymandatory
metro1500TDMLocModuleTx4
OBJECT-TYPE
state of the local transmitter
1.3.6.1.4.1.2544.1.3.15.1.1.53INTEGER {on(1), off(2), alwaysOn(3), alwaysOff(4)}read-onlymandatory
metro1500TDMLocModuleRemoteData4
OBJECT-TYPE
receiving data for this module from the remote side
1.3.6.1.4.1.2544.1.3.15.1.1.54INTEGER {data(1), noData(2)}read-onlymandatory
metro1500TDMLocModuleClockFrequency4
OBJECT-TYPE
data rate of the clock installed on local Module 4 in MBit/s
1.3.6.1.4.1.2544.1.3.15.1.1.55INTEGERread-onlymandatory
metro1500TDMLocModuleClockError4
OBJECT-TYPE
data rate and clock frequency are not synchronized
1.3.6.1.4.1.2544.1.3.15.1.1.56INTEGER {error(1), noError(2)}read-onlymandatory
metro1500Trap
OBJECT-IDENTITY
1.3.6.1.4.1.2544.1.3.100

Notifications

NameOIDStatus
metro1500HardwareAdded
NOTIFICATION-TYPE
Trap is sent when a new Module is inserted into the FSP-I Box
1.3.6.1.4.1.2544.1.3.100.0.1
metro1500HardwareDeleted
NOTIFICATION-TYPE
Trap is sent when a Module is removed from the FSP-I Box
1.3.6.1.4.1.2544.1.3.100.0.2
metro1500PSNotFail
NOTIFICATION-TYPE
Trap is sent when a Power Supply starts working
1.3.6.1.4.1.2544.1.3.100.0.3
metro1500PSFail
NOTIFICATION-TYPE
Trap is sent when a Power Supply fails
1.3.6.1.4.1.2544.1.3.100.0.4
metro1500FanNotFail
NOTIFICATION-TYPE
Trap is sent when a Fan starts working
1.3.6.1.4.1.2544.1.3.100.0.5
metro1500FanFail
NOTIFICATION-TYPE
Trap is sent when a Fan fails
1.3.6.1.4.1.2544.1.3.100.0.6
metro1500BusNotFail
NOTIFICATION-TYPE
Trap is sent when the internal Bus starts working again
1.3.6.1.4.1.2544.1.3.100.0.7
metro1500BusFail
NOTIFICATION-TYPE
Trap is sent when an internal Bus Failure occurs
1.3.6.1.4.1.2544.1.3.100.0.8
metro1500RxLocOn
NOTIFICATION-TYPE
Trap is sent when the local Receiver gets Signal
1.3.6.1.4.1.2544.1.3.100.0.20
metro1500RxLocOff
NOTIFICATION-TYPE
Trap is sent when the local Receiver has Loss of Signal
1.3.6.1.4.1.2544.1.3.100.0.21
metro1500TxLocOn
NOTIFICATION-TYPE
Trap is sent when the local Transmitter is switched on, Either this trap or Trap #20 should be disabled in the Configuration because they are typically sent at the same Time.
1.3.6.1.4.1.2544.1.3.100.0.22
metro1500TxLocOff
NOTIFICATION-TYPE
Trap is sent when the local Transmitter is switched off, Either this trap or Trap #21 should be disabled in the Configuration because they are typically sent at the same Time.
1.3.6.1.4.1.2544.1.3.100.0.23
metro1500RxRemOn
NOTIFICATION-TYPE
Trap is sent when the remote Receiver gets Signal
1.3.6.1.4.1.2544.1.3.100.0.24
metro1500RxRemOff
NOTIFICATION-TYPE
Trap is sent when the remote Receiver has Loss of Signal
1.3.6.1.4.1.2544.1.3.100.0.25
metro1500TxRemOn
NOTIFICATION-TYPE
Trap is sent when the remote Transmitter is switched on, Either this trap or Trap #24 should be disabled in the Configuration because they are typically sent at the same Time.
1.3.6.1.4.1.2544.1.3.100.0.26
metro1500TxRemOff
NOTIFICATION-TYPE
Trap is sent when the remote Transmitter is switched off, Either this trap or Trap #25 should be disabled in the Configuration because they are typically sent at the same Time.
1.3.6.1.4.1.2544.1.3.100.0.27
metro1500RxRem2On
NOTIFICATION-TYPE
Trap is sent when the 2nd remote Receiver gets Signal. This Trap is only sent if there is a 2nd remote Receiver.
1.3.6.1.4.1.2544.1.3.100.0.28
metro1500RxRem2Off
NOTIFICATION-TYPE
Trap is sent when the 2nd remote Receiver has Loss of Signal. This Trap is only sent if there is a 2nd remote Receiver.
1.3.6.1.4.1.2544.1.3.100.0.29
metro1500TxRem2On
NOTIFICATION-TYPE
Trap is sent when the 2nd remote Transmitter is switched on, Either this Trap or Trap #28 should be disabled in the Configuration because they are typically sent at the same Time. This Trap is only sent if there is a 2nd remote Receiver.
1.3.6.1.4.1.2544.1.3.100.0.30
metro1500TxRem2Off
NOTIFICATION-TYPE
Trap is sent when the 2nd remote Transmitter is switched off, Either this trap or Trap #29 should be disabled in the Configuration because they are typically sent at the same Time.
1.3.6.1.4.1.2544.1.3.100.0.31
metro1500ClockNoFail
NOTIFICATION-TYPE
Trap is sent if a Clock is installed and can synchronize with the input Signal. This Trap is not sent if the installed Clock does not have an error Output
1.3.6.1.4.1.2544.1.3.100.0.32
metro1500ClockFail
NOTIFICATION-TYPE
Trap is sent if a Clock is installed and can not synchronize with the input Signal. This trap is not sent if the installed Clock does not have an error Output
1.3.6.1.4.1.2544.1.3.100.0.33
metro1500ClockChangeFrequency
NOTIFICATION-TYPE
Trap is sent if a multi frequency Clock is installed and changes its frequency.
1.3.6.1.4.1.2544.1.3.100.0.34
metro1500LocLoopOn
NOTIFICATION-TYPE
Trap is sent if Local Loop is set to On.
1.3.6.1.4.1.2544.1.3.100.0.35
metro1500LocLoopOff
NOTIFICATION-TYPE
Trap is sent if Local Loop is set to Off.
1.3.6.1.4.1.2544.1.3.100.0.36
metro1500RemLoopOn
NOTIFICATION-TYPE
Trap is sent if Remote Loop is set to On.
1.3.6.1.4.1.2544.1.3.100.0.37
metro1500RemLoopOff
NOTIFICATION-TYPE
Trap is sent if Remote Loop is set to Off.
1.3.6.1.4.1.2544.1.3.100.0.38
metro1500switchReferenceLaserOn
NOTIFICATION-TYPE
Trap is sent when the Reference Laser is switched on
1.3.6.1.4.1.2544.1.3.100.0.40
metro1500switchReferenceLaserOff
NOTIFICATION-TYPE
Trap is sent when the Reference Laser is switched off
1.3.6.1.4.1.2544.1.3.100.0.41
metro1500switchToA
NOTIFICATION-TYPE
Trap is sent when the Switch switches to Line A
1.3.6.1.4.1.2544.1.3.100.0.42
metro1500switchToB
NOTIFICATION-TYPE
Trap is sent when the Switch switches to Line B
1.3.6.1.4.1.2544.1.3.100.0.43
metro1500switchAutomatic
NOTIFICATION-TYPE
Trap is sent when the Switch is going to Automatic State
1.3.6.1.4.1.2544.1.3.100.0.44
metro1500switchLocked
NOTIFICATION-TYPE
Trap is sent when the Switch is going to Locked State
1.3.6.1.4.1.2544.1.3.100.0.45
metro1500switchLineAavail
NOTIFICATION-TYPE
Trap is sent when the Switch Line A is available
1.3.6.1.4.1.2544.1.3.100.0.46
metro1500switchLineANotAvail
NOTIFICATION-TYPE
Trap is sent when the Switch Line A is not available
1.3.6.1.4.1.2544.1.3.100.0.47
metro1500switchLineBavail
NOTIFICATION-TYPE
Trap is sent when the Switch Line B is available
1.3.6.1.4.1.2544.1.3.100.0.48
metro1500switchLineBNotAvail
NOTIFICATION-TYPE
Trap is sent when the Switch Line B is not available
1.3.6.1.4.1.2544.1.3.100.0.49
metro1500repeatedMessage
NOTIFICATION-TYPE
Trap is sent, after three times the same trap is sent (instead of the fourth one). The original trap is suppressed for one minute.
1.3.6.1.4.1.2544.1.3.100.0.50
metro1500INNCDown
NOTIFICATION-TYPE
Trap is sent, when the Inter NEMI Network Connection (INNC) is down.
1.3.6.1.4.1.2544.1.3.100.0.51
metro1500INNCUp
NOTIFICATION-TYPE
Trap is sent, when the Inter NEMI Network Connection (INNC) is up.
1.3.6.1.4.1.2544.1.3.100.0.52
metro1500EthernetHubPortEnable
NOTIFICATION-TYPE
Trap is sent, when one of the ports of the Ethernet Hub is enabled by the management software (default). Use SNMP Get to get the Port Number.
1.3.6.1.4.1.2544.1.3.100.0.60
metro1500EthernetHubPortDisable
NOTIFICATION-TYPE
Trap is sent, when one of the ports of the Ethernet Hub is disabled by the management Software. Use SNMP Get to get the Port number.
1.3.6.1.4.1.2544.1.3.100.0.61
metro1500EthernetHubPortPartitioned
NOTIFICATION-TYPE
Trap is sent, when a Hub Port is disabled by the Hub Hardware. Use SNMP Get to get the Port Number.
1.3.6.1.4.1.2544.1.3.100.0.62
metro1500EthernetHubPortNotPartitioned
NOTIFICATION-TYPE
Trap is sent, when a Hub Port is enabled by the Hub Hardware (default). Use SNMP Get to get the Port Number.
1.3.6.1.4.1.2544.1.3.100.0.63
metro1500EthernetHubPortLinkPulses
NOTIFICATION-TYPE
Trap is sent, when a Hub Port starts receiving Link Pulses. Use SNMP Get to get the Port Number
1.3.6.1.4.1.2544.1.3.100.0.64
metro1500EthernetHubPortNoLinkPulses
NOTIFICATION-TYPE
Trap is sent, when a Hub Port stops receiving Link Pulses. Use SNMP Get to get the Port Number
1.3.6.1.4.1.2544.1.3.100.0.65
metro1500TDMRemoteSyncLoss
NOTIFICATION-TYPE
Trap is sent, when the synchronisation of the incoming remote data stream is lost
1.3.6.1.4.1.2544.1.3.100.0.70
metro1500TDMRemoteSync
NOTIFICATION-TYPE
Trap is sent, when the synchronisation of the incoming remote data stream is established
1.3.6.1.4.1.2544.1.3.100.0.71
metro1500TDMLocModuleEnabled1
NOTIFICATION-TYPE
Trap is sent, when local module 1 is enabled by software
1.3.6.1.4.1.2544.1.3.100.0.72
metro1500TDMLocModuleDisable1
NOTIFICATION-TYPE
Trap is sent, when local module 1 is disabled by software
1.3.6.1.4.1.2544.1.3.100.0.73
metro1500TDMLocModuleEnabled2
NOTIFICATION-TYPE
Trap is sent, when local module 2 is enabled by software
1.3.6.1.4.1.2544.1.3.100.0.74
metro1500TDMLocModuleDisable2
NOTIFICATION-TYPE
Trap is sent, when local module 2 is disabled by software
1.3.6.1.4.1.2544.1.3.100.0.75
metro1500TDMLocModuleEnabled3
NOTIFICATION-TYPE
Trap is sent, when local module 3 is enabled by software
1.3.6.1.4.1.2544.1.3.100.0.76
metro1500TDMLocModuleDisable3
NOTIFICATION-TYPE
Trap is sent, when local module 3 is disabled by software
1.3.6.1.4.1.2544.1.3.100.0.77
metro1500TDMLocModuleEnabled4
NOTIFICATION-TYPE
Trap is sent, when local module 4 is enabled by software
1.3.6.1.4.1.2544.1.3.100.0.78
metro1500TDMLocModuleDisable4
NOTIFICATION-TYPE
Trap is sent, when local module 4 is disabled by software
1.3.6.1.4.1.2544.1.3.100.0.79
metro1500TDMLocModuleRxOn1
NOTIFICATION-TYPE
Trap is sent, when the local receiver 1 of a TDM card gets modulated signal
1.3.6.1.4.1.2544.1.3.100.0.88
metro1500TDMLocModuleRxOff1
NOTIFICATION-TYPE
Trap is sent, when the local receiver 1 of a TDM card doesn't get modulated signal
1.3.6.1.4.1.2544.1.3.100.0.89
metro1500TDMLocModuleRxOn2
NOTIFICATION-TYPE
Trap is sent, when the local receiver 2 of a TDM card gets modulated signal
1.3.6.1.4.1.2544.1.3.100.0.90
metro1500TDMLocModuleRxOff2
NOTIFICATION-TYPE
Trap is sent, when the local receiver 2 of a TDM card doesn't get modulated signal
1.3.6.1.4.1.2544.1.3.100.0.91
metro1500TDMLocModuleRxOn3
NOTIFICATION-TYPE
Trap is sent, when the local receiver 3 of a TDM card gets modulated signal
1.3.6.1.4.1.2544.1.3.100.0.92
metro1500TDMLocModuleRxOff3
NOTIFICATION-TYPE
Trap is sent, when the local receiver 3 of a TDM card doesn't get modulated signal
1.3.6.1.4.1.2544.1.3.100.0.93
metro1500TDMLocModuleRxOn4
NOTIFICATION-TYPE
Trap is sent, when the local receiver 4 of a TDM card gets modulated signal
1.3.6.1.4.1.2544.1.3.100.0.94
metro1500TDMLocModuleRxOff4
NOTIFICATION-TYPE
Trap is sent, when the local receiver 4 of a TDM card doesn't get modulated signal
1.3.6.1.4.1.2544.1.3.100.0.95
metro1500TDMLocModuleData1
NOTIFICATION-TYPE
Trap is sent, when data from the remote side is available for this TDM channel
1.3.6.1.4.1.2544.1.3.100.0.104
metro1500TDMLocModuleNoData1
NOTIFICATION-TYPE
Trap is sent, when no data from the remote side is available for this TDM channel
1.3.6.1.4.1.2544.1.3.100.0.105
metro1500TDMLocModuleData2
NOTIFICATION-TYPE
Trap is sent, when data from the remote side is available for this TDM channel
1.3.6.1.4.1.2544.1.3.100.0.106
metro1500TDMLocModuleNoData2
NOTIFICATION-TYPE
Trap is sent, when no data from the remote side is available for this TDM channel
1.3.6.1.4.1.2544.1.3.100.0.107
metro1500TDMLocModuleData3
NOTIFICATION-TYPE
Trap is sent, when data from the remote side is available for this TDM channel
1.3.6.1.4.1.2544.1.3.100.0.108
metro1500TDMLocModuleNoData3
NOTIFICATION-TYPE
Trap is sent, when no data from the remote side is available for this TDM channel
1.3.6.1.4.1.2544.1.3.100.0.109
metro1500TDMLocModuleData4
NOTIFICATION-TYPE
Trap is sent, when data from the remote side is available for this TDM channel
1.3.6.1.4.1.2544.1.3.100.0.110
metro1500TDMLocModuleNoData4
NOTIFICATION-TYPE
Trap is sent, when no data from the remote side is available for this TDM channel
1.3.6.1.4.1.2544.1.3.100.0.111
metro1500TDMLocModuleClockFail1
NOTIFICATION-TYPE
Trap is sent, when the Data Rate of the local input signal doesn't match the Data Rate of the local clock
1.3.6.1.4.1.2544.1.3.100.0.120
metro1500TDMLocModuleClockNoFail1
NOTIFICATION-TYPE
Trap is sent, when the Data Rate of the local input signal matches the Data Rate of the local clock
1.3.6.1.4.1.2544.1.3.100.0.121
metro1500TDMLocModuleClockFail2
NOTIFICATION-TYPE
Trap is sent, when the Data Rate of the local input signal doesn't match the Data Rate of the local clock
1.3.6.1.4.1.2544.1.3.100.0.122
metro1500TDMLocModuleClockNoFail2
NOTIFICATION-TYPE
Trap is sent, when the Data Rate of the local input signal matches the Data Rate of the local clock
1.3.6.1.4.1.2544.1.3.100.0.123
metro1500TDMLocModuleClockFail3
NOTIFICATION-TYPE
Trap is sent, when the Data Rate of the local input signal doesn't match the Data Rate of the local clock
1.3.6.1.4.1.2544.1.3.100.0.124
metro1500TDMLocModuleClockNoFail3
NOTIFICATION-TYPE
Trap is sent, when the Data Rate of the local input signal matches the Data Rate of the local clock
1.3.6.1.4.1.2544.1.3.100.0.125
metro1500TDMLocModuleClockFail4
NOTIFICATION-TYPE
Trap is sent, when the Data Rate of the local input signal doesn't match the Data Rate of the local clock
1.3.6.1.4.1.2544.1.3.100.0.126
metro1500TDMLocModuleClockNoFail4
NOTIFICATION-TYPE
Trap is sent, when the Data Rate of the local input signal matches the Data Rate of the local clock
1.3.6.1.4.1.2544.1.3.100.0.127