MBG-SNMP-LT-MIB
- Registered at
- 1.3.6.1.4.1.5597.3
- Last updated
- 2012-01-25 07:45
- Organization
- www.meinberg.de
- Revisions
- 2012-01-25 07:45, 2011-03-30 00:00, 2011-03-29 00:00, 2010-01-19 00:00, 2009-12-03 00:00, 2008-09-10 00:00, 2008-07-15 00:00, 2008-06-15 00:00, 2006-08-23 00:00, 2006-03-20 00:00, 2005-07-08 00:00
- Namespace
- meinberg
- Source file
MBG-SNMP-LT-MIB- Digest
sha256:a576b85b60ddf9e4a1d7ec86349656be19fd89518dc3c4d45f88bc8af565a128
Description
Meinberg SNMP Management Information Base
Contact
postal: Meinberg Funkuhren Lange Wand 9 31812 Bad Pyrmont Germany email: info@meinberg.de
Imports
| From | Symbols |
|---|---|
| MBG-SNMP-ROOT-MIB | mbgSnmpRoot |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
MBG-SNMP-LT-MIB MBG-SNMP-ROOT-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| mbgLtInfo OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.0 | |||
| mbgLtFirmwareVersion OBJECT-TYPE shows the installed firmware version of your LANTIME | 1.3.6.1.4.1.5597.3.0.1 | DisplayString | read-only | current |
| mbgLtFirmwareVersionVal OBJECT-TYPE shows the installed firmware version of your LANTIME as an Integer32 value | 1.3.6.1.4.1.5597.3.0.2 | Integer32 (-2147483648..2147483647) | read-only | current |
| mbgLtNtp OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.1 | |||
| mbgLtNtpCurrentState OBJECT-TYPE actual state of the NTP as string | 1.3.6.1.4.1.5597.3.1.1 | DisplayString | read-only | current |
| mbgLtNtpCurrentStateVal OBJECT-TYPE current state of the NTP as Integer32 value | 1.3.6.1.4.1.5597.3.1.2 | INTEGER {notSynchronized(0), noGoodRefclock(1), syncToExtRefclock(2), syncToSerialRefclock(3), normalOperationPPS(4), normalOperationRefclock(5), unknown(99)} | read-only | current |
| mbgLtNtpStratum OBJECT-TYPE Stratum value of the NTP | 1.3.6.1.4.1.5597.3.1.3 | Integer32 (-2147483648..2147483647) | read-only | current |
| mbgLtNtpActiveRefclockId OBJECT-TYPE Index of the current refclock selected by the NTP | 1.3.6.1.4.1.5597.3.1.4 | INTEGER {localClock(0), serialRefclock(1), pps(2), externalRefclock(3), notSync(99)} | read-only | current |
| mbgLtNtpActiveRefclockName OBJECT-TYPE Name of the current refclock selected by the NTP | 1.3.6.1.4.1.5597.3.1.5 | DisplayString | read-only | current |
| mbgLtNtpActiveRefclockOffset OBJECT-TYPE Time offset between the current selected refclock and time of NTP as string | 1.3.6.1.4.1.5597.3.1.6 | DisplayString | read-only | current |
| mbgLtNtpActiveRefclockOffsetVal OBJECT-TYPE Time offset in micro seconds between the current selected refclock and time of NTP | 1.3.6.1.4.1.5597.3.1.7 | Integer32 (-2147483648..2147483647) | read-only | current |
| mbgLtNtpNumberOfRefclocks OBJECT-TYPE Number of refclocks configured in the NTP | 1.3.6.1.4.1.5597.3.1.8 | Integer32 (-2147483648..2147483647) | read-only | current |
| mbgLtNtpAuthKeyId OBJECT-TYPE Authentication Key ID of active refclock is active | 1.3.6.1.4.1.5597.3.1.9 | Integer32 (-2147483648..2147483647) | read-only | current |
| mbgLtNtpVersion OBJECT-TYPE integrated NTP version | 1.3.6.1.4.1.5597.3.1.10 | DisplayString | read-only | current |
| mbgLtRefclock OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.2 | |||
| mbgLtRefClockType OBJECT-TYPE Type of refclock connected to NTP time server | 1.3.6.1.4.1.5597.3.2.1 | DisplayString | read-only | current |
| mbgLtRefClockTypeVal OBJECT-TYPE Type of refclock connected to NTP time server as value | 1.3.6.1.4.1.5597.3.2.2 | INTEGER {notavailable(0), mbgGPS167(1), mbgGPS167BGTTGP(2), mbgPZF509(3), mbgPZF509BGTTGP(4), mbgSHS(5), mbgSHSBGT(6), mbgSHSFRC(7), mbgSHSFRCBGT(8), mbgTCR509(9), mbgTCR509BGTTGP(10), mbgRDT(11), mbgRDTBGTTGP(12), mbgEDT(13), mbgEDTBGTTGP(14), mbgAHS(15), mbgDHS(16), mbgNDT167(17), mbgNDT167BGT(18), mbgDCT(19), mbgDCTBGT(20), mbgSHSTCR(21), mbgSHSTCRBGT(22)} | read-only | current |
| mbgLtRefClockMode OBJECT-TYPE current mode of refclock connected to NTP time server | 1.3.6.1.4.1.5597.3.2.3 | DisplayString | read-only | current |
| mbgLtRefClockModeVal OBJECT-TYPE current mode of refclock connected to NTP time server as value | 1.3.6.1.4.1.5597.3.2.4 | INTEGER {notavailable(0), normalOperation(1), trackingSearching(2), antennaFaulty(3), warmBoot(4), coldBoot(5), antennaShortcircuit(6)} | read-only | current |
| mbgLtRefGpsState OBJECT-TYPE current State of GPS refclock conneted to NTP time server | 1.3.6.1.4.1.5597.3.2.5 | DisplayString | read-only | current |
| mbgLtRefGpsStateVal OBJECT-TYPE current State of GPS refclock conneted to NTP time server as value | 1.3.6.1.4.1.5597.3.2.6 | INTEGER {notavailable(0), synchronized(1), notsynchronized(2)} | read-only | current |
| mbgLtRefGpsPosition OBJECT-TYPE current Position of GPS refclock conneted to NTP time server | 1.3.6.1.4.1.5597.3.2.7 | DisplayString | read-only | current |
| mbgLtRefGpsSatellites OBJECT-TYPE current Satellites in view and good of GPS refclock connected to NTP time server | 1.3.6.1.4.1.5597.3.2.8 | DisplayString | read-only | current |
| mbgLtRefGpsSatellitesGood OBJECT-TYPE current good Satellites of GPS refclock connected to NTP time server as value | 1.3.6.1.4.1.5597.3.2.9 | Integer32 (-2147483648..2147483647) | read-only | current |
| mbgLtRefGpsSatellitesInView OBJECT-TYPE current Satellites in view of GPS refclock conneted to NTP time server as value | 1.3.6.1.4.1.5597.3.2.10 | Integer32 (-2147483648..2147483647) | read-only | current |
| mbgLtRefPzfState OBJECT-TYPE current State of DCF77/PZF refclock connected to NTP time server | 1.3.6.1.4.1.5597.3.2.11 | DisplayString | read-only | current |
| mbgLtRefPzfStateVal OBJECT-TYPE current State of DCF77/PZF refclock connected to NTP time server as value | 1.3.6.1.4.1.5597.3.2.12 | INTEGER {notavailable(0), sync(1), notsyncnow(2), neversynced(3)} | read-only | current |
| mbgLtRefPzfKorrelation OBJECT-TYPE current Korrelation of DCF77/PZF refclock connected to NTP time server | 1.3.6.1.4.1.5597.3.2.13 | Integer32 (0..255) | read-only | current |
| mbgLtRefPzfField OBJECT-TYPE current strength of field of DCF77/PZF refclock connected to NTP time server | 1.3.6.1.4.1.5597.3.2.14 | Integer32 (-2147483648..2147483647) | read-only | current |
| mbgLtRefGpsMode OBJECT-TYPE current Mode of GPS refclock connected to NTP time server | 1.3.6.1.4.1.5597.3.2.15 | DisplayString | read-only | current |
| mbgLtRefGpsModeVal OBJECT-TYPE current Mode of GPS refclock connected to NTP time server as value | 1.3.6.1.4.1.5597.3.2.16 | INTEGER {notavailable(0), normalOperation(1), trackingSearching(2), antennaFaulty(3), warmBoot(4), coldBoot(5), antennaShortcircuit(6)} | read-only | current |
| mbgLtRefIrigMode OBJECT-TYPE current Mode of IRIG refclock conneted to NTP time server | 1.3.6.1.4.1.5597.3.2.17 | DisplayString | read-only | current |
| mbgLtRefIrigModeVal OBJECT-TYPE current Mode of IRIG refclock conneted to NTP time server as value | 1.3.6.1.4.1.5597.3.2.18 | INTEGER {notavailable(0), locked(1), notlocked(2), telegramError(3)} | read-only | current |
| mbgLtRefPzfMode OBJECT-TYPE current Mode of PZF refclock connected to NTP time server | 1.3.6.1.4.1.5597.3.2.19 | DisplayString | read-only | current |
| mbgLtRefPzfModeVal OBJECT-TYPE current Mode of PZF refclock connected to NTP time server as value | 1.3.6.1.4.1.5597.3.2.20 | INTEGER {notavailable(0), normalOperation(1), antennaFaulty(2)} | read-only | current |
| mbgLtRefIrigState OBJECT-TYPE current State of IRIG refclock connected to NTP time server | 1.3.6.1.4.1.5597.3.2.21 | DisplayString | read-only | current |
| mbgLtRefIrigStateVal OBJECT-TYPE current State of IRIG refclock connected to NTP time server as value | 1.3.6.1.4.1.5597.3.2.22 | Integer32 (-2147483648..2147483647) | read-only | current |
| mbgLtRefSHSMode OBJECT-TYPE current Mode of SHS system connected to NTP time server | 1.3.6.1.4.1.5597.3.2.23 | DisplayString | read-only | current |
| mbgLtRefSHSModeVal OBJECT-TYPE current Mode of SHS system connected to NTP time server as value | 1.3.6.1.4.1.5597.3.2.24 | INTEGER {notavailable(0), normalOperation(1), stoppedTimeLimitError(2)} | read-only | current |
| mbgLtRefSHSTimeDiff OBJECT-TYPE current time difference between the two SHS reference time sources in miliseconds | 1.3.6.1.4.1.5597.3.2.25 | Integer32 (-2147483648..2147483647) | read-only | current |
| mbgLtRefDctState OBJECT-TYPE current State of DCF77 refclock connected to NTP time server | 1.3.6.1.4.1.5597.3.2.26 | DisplayString | read-only | current |
| mbgLtRefDctStateVal OBJECT-TYPE current State of DCF77 refclock connected to NTP time server as value | 1.3.6.1.4.1.5597.3.2.27 | INTEGER {notavailable(0), sync(1), notsyncnow(2), neversynced(3)} | read-only | current |
| mbgLtRefDctField OBJECT-TYPE current strength of field of DCF77 refclock connected to NTP time server | 1.3.6.1.4.1.5597.3.2.28 | DisplayString | read-only | current |
| mbgLtRefDctMode OBJECT-TYPE current Mode of DCF77 refclock connected to NTP time server | 1.3.6.1.4.1.5597.3.2.29 | DisplayString | read-only | current |
| mbgLtRefDctModeVal OBJECT-TYPE current Mode of DCF77 refclock connected to NTP time server as value | 1.3.6.1.4.1.5597.3.2.30 | INTEGER {notavailable(0), normalOperation(1), antennaFaulty(2)} | read-only | current |
| mbgLtRefGpsLeapSecond OBJECT-TYPE Date and Time of leap second announcement received via GPS | 1.3.6.1.4.1.5597.3.2.31 | DisplayString | read-only | current |
| mbgLtRefGpsLeapCorrection OBJECT-TYPE Leap Second Correction received via GPS | 1.3.6.1.4.1.5597.3.2.32 | Integer32 | read-only | current |
| mbgLtMrs OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.2.50 | |||
| mbgLtRefMrsRef OBJECT-TYPE ID of currently active reference source as a string | 1.3.6.1.4.1.5597.3.2.50.1 | DisplayString | read-only | current |
| mbgLtRefMrsRefVal OBJECT-TYPE currently active reference as a value | 1.3.6.1.4.1.5597.3.2.50.2 | INTEGER {notavailable(0), refGps(1), refIrig(2), refPps(3), refFreq(4), refPtp(5), refNtp(6), refFreeRun(99)} | read-only | current |
| mbgLtRefMrsRefList OBJECT-TYPE List of all supported MRS references in a comma separated list | 1.3.6.1.4.1.5597.3.2.50.3 | DisplayString | read-only | current |
| mbgLtRefMrsPrioList OBJECT-TYPE List of all active MRS references in a comma separated list sorted by priority | 1.3.6.1.4.1.5597.3.2.50.4 | DisplayString | read-only | current |
| mbgLtMrsRef OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.2.50.10 | |||
| mbgLtMrsRefGps OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.2.50.10.1 | |||
| mbgLtMrsGpsOffs OBJECT-TYPE Offset of this reference to the currently active reference, unit included in the string | 1.3.6.1.4.1.5597.3.2.50.10.1.1 | DisplayString | read-only | current |
| mbgLtMrsGpsOffsVal OBJECT-TYPE Offset of this reference to the currently active reference, unit see below | 1.3.6.1.4.1.5597.3.2.50.10.1.2 | Integer32 | read-only | current |
| mbgLtMrsGpsOffsBase OBJECT-TYPE base of the offset value shown in mbgLtMrsGpsOffsVal | 1.3.6.1.4.1.5597.3.2.50.10.1.3 | INTEGER {baseSeconds(0), baseMiliseconds(3), baseMicroseconds(6), baseNanoseconds(9)} | read-only | current |
| mbgLtMrsGpsPrio OBJECT-TYPE the configured priority of this reference | 1.3.6.1.4.1.5597.3.2.50.10.1.4 | Integer32 | read-only | current |
| mbgLtMrsGpsState OBJECT-TYPE the current status of this reference as a string | 1.3.6.1.4.1.5597.3.2.50.10.1.5 | DisplayString | read-only | current |
| mbgLtMrsGpsStateVal OBJECT-TYPE the current status of this reference as an Integer value | 1.3.6.1.4.1.5597.3.2.50.10.1.6 | INTEGER {notAvailable(0), notSupported(1), notConnected(2), noSignal(3), hasLocked(4), isAvailable(5), isAccurate(6), isMaster(7)} | read-only | current |
| mbgLtMrsGpsPrecision OBJECT-TYPE Precision Factor of this reference in nanoseconds | 1.3.6.1.4.1.5597.3.2.50.10.1.7 | Integer32 | read-write | current |
| mbgLtMrsRefIrig OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.2.50.10.2 | |||
| mbgLtMrsIrigOffs OBJECT-TYPE Offset of this reference to the currently active reference, unit included in the string | 1.3.6.1.4.1.5597.3.2.50.10.2.1 | DisplayString | read-only | current |
| mbgLtMrsIrigOffsVal OBJECT-TYPE Offset of this reference to the currently active reference, unit see below | 1.3.6.1.4.1.5597.3.2.50.10.2.2 | Integer32 | read-only | current |
| mbgLtMrsIrigOffsBase OBJECT-TYPE base of the offset value shown in mbgLtMrsIrigOffsVal | 1.3.6.1.4.1.5597.3.2.50.10.2.3 | INTEGER {baseSeconds(0), baseMiliseconds(3), baseMicroseconds(6), baseNanoseconds(9)} | read-only | current |
| mbgLtMrsIrigPrio OBJECT-TYPE the configured priority of this reference | 1.3.6.1.4.1.5597.3.2.50.10.2.4 | Integer32 | read-only | current |
| mbgLtMrsIrigState OBJECT-TYPE the current status of this reference as a string | 1.3.6.1.4.1.5597.3.2.50.10.2.5 | DisplayString | read-only | current |
| mbgLtMrsIrigStateVal OBJECT-TYPE the current status of this reference as an Integer value | 1.3.6.1.4.1.5597.3.2.50.10.2.6 | INTEGER {notAvailable(0), notSupported(1), notConnected(2), noSignal(3), hasLocked(4), isAvailable(5), isAccurate(6), isMaster(7)} | read-only | current |
| mbgLtMrsIrigCorr OBJECT-TYPE Correction Value (Fixed Offset) of this reference in nanoseconds | 1.3.6.1.4.1.5597.3.2.50.10.2.7 | Integer32 | read-write | current |
| mbgLtMrsIrigOffsLimit OBJECT-TYPE Offset Limit in nanoseconds, if exceeded this will trigger a notification | 1.3.6.1.4.1.5597.3.2.50.10.2.8 | Integer32 | read-write | current |
| mbgLtMrsIrigPrecision OBJECT-TYPE Precision Factor of this reference in nanoseconds | 1.3.6.1.4.1.5597.3.2.50.10.2.9 | Integer32 | read-write | current |
| mbgLtMrsRefPps OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.2.50.10.3 | |||
| mbgLtMrsPpsOffs OBJECT-TYPE Offset of this reference to the currently active reference, unit included in the string | 1.3.6.1.4.1.5597.3.2.50.10.3.1 | DisplayString | read-only | current |
| mbgLtMrsPpsOffsVal OBJECT-TYPE Offset of this reference to the currently active reference, unit see below | 1.3.6.1.4.1.5597.3.2.50.10.3.2 | Integer32 | read-only | current |
| mbgLtMrsPpsOffsBase OBJECT-TYPE base of the offset value shown in mbgLtMrsPpsOffsVal | 1.3.6.1.4.1.5597.3.2.50.10.3.3 | INTEGER {baseSeconds(0), baseMiliseconds(3), baseMicroseconds(6), baseNanoseconds(9)} | read-only | current |
| mbgLtMrsPpsPrio OBJECT-TYPE the configured priority of this reference | 1.3.6.1.4.1.5597.3.2.50.10.3.4 | Integer32 | read-only | current |
| mbgLtMrsPpsState OBJECT-TYPE the current status of this reference as a string | 1.3.6.1.4.1.5597.3.2.50.10.3.5 | DisplayString | read-only | current |
| mbgLtMrsPpsStateVal OBJECT-TYPE the current status of this reference as an Integer value | 1.3.6.1.4.1.5597.3.2.50.10.3.6 | INTEGER {notAvailable(0), notSupported(1), notConnected(2), noSignal(3), hasLocked(4), isAvailable(5), isAccurate(6), isMaster(7)} | read-only | current |
| mbgLtMrsPpsCorr OBJECT-TYPE Correction Value (Fixed Offset) of this reference in nanoseconds | 1.3.6.1.4.1.5597.3.2.50.10.3.7 | Integer32 | read-write | current |
| mbgLtMrsPpsOffsLimit OBJECT-TYPE Offset Limit in nanoseconds, if exceeded this will trigger a notification | 1.3.6.1.4.1.5597.3.2.50.10.3.8 | Integer32 | read-write | current |
| mbgLtMrsPpsPrecision OBJECT-TYPE Precision Factor of this reference in nanoseconds | 1.3.6.1.4.1.5597.3.2.50.10.3.9 | Integer32 | read-write | current |
| mbgLtMrsRefFreq OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.2.50.10.4 | |||
| mbgLtMrsFreqOffs OBJECT-TYPE Offset of this reference to the currently active reference, unit included in the string | 1.3.6.1.4.1.5597.3.2.50.10.4.1 | DisplayString | read-only | current |
| mbgLtMrsFreqOffsVal OBJECT-TYPE Offset of this reference to the currently active reference, unit see below | 1.3.6.1.4.1.5597.3.2.50.10.4.2 | Integer32 | read-only | current |
| mbgLtMrsFreqOffsBase OBJECT-TYPE base of the offset value shown in mbgLtMrsFreqOffsVal | 1.3.6.1.4.1.5597.3.2.50.10.4.3 | INTEGER {baseSeconds(0), baseMiliseconds(3), baseMicroseconds(6), baseNanoseconds(9)} | read-only | current |
| mbgLtMrsFreqPrio OBJECT-TYPE the configured priority of this reference | 1.3.6.1.4.1.5597.3.2.50.10.4.4 | Integer32 | read-only | current |
| mbgLtMrsFreqState OBJECT-TYPE the current status of this reference as a string | 1.3.6.1.4.1.5597.3.2.50.10.4.5 | DisplayString | read-only | current |
| mbgLtMrsFreqStateVal OBJECT-TYPE the current status of this reference as an Integer value | 1.3.6.1.4.1.5597.3.2.50.10.4.6 | INTEGER {notAvailable(0), notSupported(1), notConnected(2), noSignal(3), hasLocked(4), isAvailable(5), isAccurate(6), isMaster(7)} | read-only | current |
| mbgLtMrsFreqCorr OBJECT-TYPE Correction Value (Fixed Offset) of this reference in nanoseconds | 1.3.6.1.4.1.5597.3.2.50.10.4.7 | Integer32 | read-write | current |
| mbgLtMrsFreqOffsLimit OBJECT-TYPE Offset Limit in nanoseconds, if exceeded this will trigger a notification | 1.3.6.1.4.1.5597.3.2.50.10.4.8 | Integer32 | read-write | current |
| mbgLtMrsFreqPrecision OBJECT-TYPE Precision Factor of this reference in nanoseconds | 1.3.6.1.4.1.5597.3.2.50.10.4.9 | Integer32 | read-write | current |
| mbgLtMrsRefPtp OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.2.50.10.5 | |||
| mbgLtMrsPtpOffs OBJECT-TYPE Offset of this reference to the currently active reference, unit included in the string | 1.3.6.1.4.1.5597.3.2.50.10.5.1 | DisplayString | read-only | current |
| mbgLtMrsPtpOffsVal OBJECT-TYPE Offset of this reference to the currently active reference, unit see below | 1.3.6.1.4.1.5597.3.2.50.10.5.2 | Integer32 | read-only | current |
| mbgLtMrsPtpOffsBase OBJECT-TYPE base of the offset value shown in mbgLtMrsPtpOffsVal | 1.3.6.1.4.1.5597.3.2.50.10.5.3 | INTEGER {baseSeconds(0), baseMiliseconds(3), baseMicroseconds(6), baseNanoseconds(9)} | read-only | current |
| mbgLtMrsPtpPrio OBJECT-TYPE the configured priority of this reference | 1.3.6.1.4.1.5597.3.2.50.10.5.4 | Integer32 | read-only | current |
| mbgLtMrsPtpState OBJECT-TYPE the current status of this reference as a string | 1.3.6.1.4.1.5597.3.2.50.10.5.5 | DisplayString | read-only | current |
| mbgLtMrsPtpStateVal OBJECT-TYPE the current status of this reference as an Integer value | 1.3.6.1.4.1.5597.3.2.50.10.5.6 | INTEGER {notAvailable(0), notSupported(1), notConnected(2), noSignal(3), hasLocked(4), isAvailable(5), isAccurate(6), isMaster(7)} | read-only | current |
| mbgLtMrsPtpCorr OBJECT-TYPE Correction Value (Fixed Offset) of this reference in nanoseconds | 1.3.6.1.4.1.5597.3.2.50.10.5.7 | Integer32 | read-write | current |
| mbgLtMrsPtpOffsLimit OBJECT-TYPE Offset Limit in nanoseconds, if exceeded this will trigger a notification | 1.3.6.1.4.1.5597.3.2.50.10.5.8 | Integer32 | read-write | current |
| mbgLtMrsPtpPrecision OBJECT-TYPE Precision Factor of this reference in nanoseconds | 1.3.6.1.4.1.5597.3.2.50.10.5.9 | Integer32 | read-write | current |
| mbgLtMrsRefNtp OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.2.50.10.6 | |||
| mbgLtMrsNtpOffs OBJECT-TYPE Offset of this reference to the currently active reference, unit included in the string | 1.3.6.1.4.1.5597.3.2.50.10.6.1 | DisplayString | read-only | current |
| mbgLtMrsNtpOffsVal OBJECT-TYPE Offset of this reference to the currently active reference, unit see below | 1.3.6.1.4.1.5597.3.2.50.10.6.2 | Integer32 | read-only | current |
| mbgLtMrsNtpOffsBase OBJECT-TYPE base of the offset value shown in mbgLtMrsNtpOffsVal | 1.3.6.1.4.1.5597.3.2.50.10.6.3 | INTEGER {baseSeconds(0), baseMiliseconds(3), baseMicroseconds(6), baseNanoseconds(9)} | read-only | current |
| mbgLtMrsNtpPrio OBJECT-TYPE the configured priority of this reference | 1.3.6.1.4.1.5597.3.2.50.10.6.4 | Integer32 | read-only | current |
| mbgLtMrsNtpState OBJECT-TYPE the current status of this reference as a string | 1.3.6.1.4.1.5597.3.2.50.10.6.5 | DisplayString | read-only | current |
| mbgLtMrsNtpStateVal OBJECT-TYPE the current status of this reference as an Integer value | 1.3.6.1.4.1.5597.3.2.50.10.6.6 | INTEGER {notAvailable(0), notSupported(1), notConnected(2), noSignal(3), hasLocked(4), isAvailable(5), isAccurate(6), isMaster(7)} | read-only | current |
| mbgLtMrsNtpCorr OBJECT-TYPE Correction Value (Fixed Offset) of this reference in nanoseconds | 1.3.6.1.4.1.5597.3.2.50.10.6.7 | Integer32 | read-write | current |
| mbgLtMrsNtpOffsLimit OBJECT-TYPE Offset Limit in nanoseconds, if exceeded this will trigger a notification | 1.3.6.1.4.1.5597.3.2.50.10.6.8 | Integer32 | read-write | current |
| mbgLtMrsNtpPrecision OBJECT-TYPE Precision Factor of this reference in nanoseconds | 1.3.6.1.4.1.5597.3.2.50.10.6.9 | Integer32 | read-write | current |
| mbgLtNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.3 | |||
| mbgLtTraps OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.3.0 | |||
| mbgLtTrapMessage OBJECT-TYPE used as a payload object for all traps, holds a clear text event message | 1.3.6.1.4.1.5597.3.3.0.100 | DisplayString | read-only | current |
| mbgLtCfg OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4 | |||
| mbgLtCfgNetwork OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.1 | |||
| mbgLtCfgHostname OBJECT-TYPE The hostname configured for this LANTIME | 1.3.6.1.4.1.5597.3.4.1.1 | DisplayString | read-write | current |
| mbgLtCfgDomainname OBJECT-TYPE The domainname configured for this LANTIME | 1.3.6.1.4.1.5597.3.4.1.2 | DisplayString | read-write | current |
| mbgLtCfgNameserver1 OBJECT-TYPE The first nameserver used by this LANTIME | 1.3.6.1.4.1.5597.3.4.1.3 | DisplayString | read-write | current |
| mbgLtCfgNameserver2 OBJECT-TYPE The second nameserver used this LANTIME | 1.3.6.1.4.1.5597.3.4.1.4 | DisplayString | read-write | current |
| mbgLtCfgSyslogserver1 OBJECT-TYPE The first syslog server we are sending log entries to | 1.3.6.1.4.1.5597.3.4.1.5 | DisplayString | read-write | current |
| mbgLtCfgSyslogserver2 OBJECT-TYPE The second syslog server we are sending log entries to | 1.3.6.1.4.1.5597.3.4.1.6 | DisplayString | read-write | current |
| mbgLtCfgTelnetAccess OBJECT-TYPE Is telnet administration enabled | 1.3.6.1.4.1.5597.3.4.1.7 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgFTPAccess OBJECT-TYPE Is FTP administration enabled | 1.3.6.1.4.1.5597.3.4.1.8 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgHTTPAccess OBJECT-TYPE Is web based administration enabled | 1.3.6.1.4.1.5597.3.4.1.9 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgHTTPSAccess OBJECT-TYPE Is secure web based administration enabled | 1.3.6.1.4.1.5597.3.4.1.10 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgSNMPAccess OBJECT-TYPE Is SNMP administration enabled | 1.3.6.1.4.1.5597.3.4.1.11 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgSambaAccess OBJECT-TYPE Is Samba administration enabled | 1.3.6.1.4.1.5597.3.4.1.12 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgIPv6Access OBJECT-TYPE Is IPv6 support enabled | 1.3.6.1.4.1.5597.3.4.1.13 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgSSHAccess OBJECT-TYPE Is SSH administration enabled | 1.3.6.1.4.1.5597.3.4.1.14 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgNTP OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.2 | |||
| mbgLtCfgNTPServer1 OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.2.1 | |||
| mbgLtCfgNTPServer1IP OBJECT-TYPE IP address for external NTP server | 1.3.6.1.4.1.5597.3.4.2.1.1 | DisplayString | read-write | current |
| mbgLtCfgNTPServer1Key OBJECT-TYPE Key for external NTP server | 1.3.6.1.4.1.5597.3.4.2.1.2 | Integer32 (-2147483648..2147483647) | read-write | current |
| mbgLtCfgNTPServer1Autokey OBJECT-TYPE Is autokey enabled for the external NTP server | 1.3.6.1.4.1.5597.3.4.2.1.3 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgNTPServer1Prefer OBJECT-TYPE Is the preferred flag enabled for the external NTP server | 1.3.6.1.4.1.5597.3.4.2.1.4 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgNTPServer2 OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.2.2 | |||
| mbgLtCfgNTPServer2IP OBJECT-TYPE IP address for external NTP server | 1.3.6.1.4.1.5597.3.4.2.2.1 | DisplayString | read-write | current |
| mbgLtCfgNTPServer2Key OBJECT-TYPE Key for external NTP server | 1.3.6.1.4.1.5597.3.4.2.2.2 | Integer32 (-2147483648..2147483647) | read-write | current |
| mbgLtCfgNTPServer2Autokey OBJECT-TYPE Is autokey enabled for the external NTP server | 1.3.6.1.4.1.5597.3.4.2.2.3 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgNTPServer2Prefer OBJECT-TYPE Is the preferred flag enabled for the external NTP server | 1.3.6.1.4.1.5597.3.4.2.2.4 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgNTPServer3 OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.2.3 | |||
| mbgLtCfgNTPServer3IP OBJECT-TYPE IP address for external NTP server | 1.3.6.1.4.1.5597.3.4.2.3.1 | DisplayString | read-write | current |
| mbgLtCfgNTPServer3Key OBJECT-TYPE Key for external NTP server | 1.3.6.1.4.1.5597.3.4.2.3.2 | Integer32 (-2147483648..2147483647) | read-write | current |
| mbgLtCfgNTPServer3Autokey OBJECT-TYPE Is autokey enabled for the external NTP server | 1.3.6.1.4.1.5597.3.4.2.3.3 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgNTPServer3Prefer OBJECT-TYPE Is the preferred flag enabled for the external NTP server | 1.3.6.1.4.1.5597.3.4.2.3.4 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgNTPServer4 OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.2.4 | |||
| mbgLtCfgNTPServer4IP OBJECT-TYPE IP address for external NTP server | 1.3.6.1.4.1.5597.3.4.2.4.1 | DisplayString | read-write | current |
| mbgLtCfgNTPServer4Key OBJECT-TYPE Key for external NTP server | 1.3.6.1.4.1.5597.3.4.2.4.2 | Integer32 (-2147483648..2147483647) | read-write | current |
| mbgLtCfgNTPServer4Autokey OBJECT-TYPE Is autokey enabled for the external NTP server | 1.3.6.1.4.1.5597.3.4.2.4.3 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgNTPServer4Prefer OBJECT-TYPE Is the preferred flag enabled for the external NTP server | 1.3.6.1.4.1.5597.3.4.2.4.4 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgNTPServer5 OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.2.5 | |||
| mbgLtCfgNTPServer5IP OBJECT-TYPE IP address for external NTP server | 1.3.6.1.4.1.5597.3.4.2.5.1 | DisplayString | read-write | current |
| mbgLtCfgNTPServer5Key OBJECT-TYPE Key for external NTP server | 1.3.6.1.4.1.5597.3.4.2.5.2 | Integer32 (-2147483648..2147483647) | read-write | current |
| mbgLtCfgNTPServer5Autokey OBJECT-TYPE Is autokey enabled for the external NTP server | 1.3.6.1.4.1.5597.3.4.2.5.3 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgNTPServer5Prefer OBJECT-TYPE Is the preferred flag enabled for the external NTP server | 1.3.6.1.4.1.5597.3.4.2.5.4 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgNTPServer6 OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.2.6 | |||
| mbgLtCfgNTPServer6IP OBJECT-TYPE IP address for external NTP server | 1.3.6.1.4.1.5597.3.4.2.6.1 | DisplayString | read-write | current |
| mbgLtCfgNTPServer6Key OBJECT-TYPE Key for external NTP server | 1.3.6.1.4.1.5597.3.4.2.6.2 | Integer32 (-2147483648..2147483647) | read-write | current |
| mbgLtCfgNTPServer6Autokey OBJECT-TYPE Is autokey enabled for the external NTP server | 1.3.6.1.4.1.5597.3.4.2.6.3 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgNTPServer6Prefer OBJECT-TYPE Is the preferred flag enabled for the external NTP server | 1.3.6.1.4.1.5597.3.4.2.6.4 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgNTPServer7 OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.2.7 | |||
| mbgLtCfgNTPServer7IP OBJECT-TYPE IP address for external NTP server | 1.3.6.1.4.1.5597.3.4.2.7.1 | DisplayString | read-write | current |
| mbgLtCfgNTPServer7Key OBJECT-TYPE Key for external NTP server | 1.3.6.1.4.1.5597.3.4.2.7.2 | Integer32 (-2147483648..2147483647) | read-write | current |
| mbgLtCfgNTPServer7Autokey OBJECT-TYPE Is autokey enabled for the external NTP server | 1.3.6.1.4.1.5597.3.4.2.7.3 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgNTPServer7Prefer OBJECT-TYPE Is the preferred flag enabled for the external NTP server | 1.3.6.1.4.1.5597.3.4.2.7.4 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgNTPStratumLocalClock OBJECT-TYPE The stratum value assigned to the local clock of the timeserver | 1.3.6.1.4.1.5597.3.4.2.8 | Integer32 (0..15) | read-write | current |
| mbgLtCfgNTPTrustedKey OBJECT-TYPE The key used for the internal refclock of the timeserver | 1.3.6.1.4.1.5597.3.4.2.9 | Integer32 (-2147483648..2147483647) | read-write | current |
| mbgLtCfgNTPBroadcastIP OBJECT-TYPE NTP broadcast IP address | 1.3.6.1.4.1.5597.3.4.2.10 | DisplayString | read-write | current |
| mbgLtCfgNTPBroadcastKey OBJECT-TYPE Key used for NTP broadcasts | 1.3.6.1.4.1.5597.3.4.2.11 | Integer32 (-2147483648..2147483647) | read-write | current |
| mbgLtCfgNTPBroadcastAutokey OBJECT-TYPE Is autokey generation used for NTP broadcasts | 1.3.6.1.4.1.5597.3.4.2.12 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgNTPAutokeyFeature OBJECT-TYPE Is the NTP autokey feature enabled | 1.3.6.1.4.1.5597.3.4.2.13 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgNTPAtomPPS OBJECT-TYPE Is the NTP atom pps feature enabled | 1.3.6.1.4.1.5597.3.4.2.14 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgEMail OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.3 | |||
| mbgLtCfgEMailTo OBJECT-TYPE EMail address to send alerts etc. to (receiving address) | 1.3.6.1.4.1.5597.3.4.3.1 | DisplayString | read-write | current |
| mbgLtCfgEMailFrom OBJECT-TYPE EMail address to send alerts etc. from (sending address) | 1.3.6.1.4.1.5597.3.4.3.2 | DisplayString | read-write | current |
| mbgLtCfgEMailSmarthost OBJECT-TYPE SMTP smarthost used to send mail | 1.3.6.1.4.1.5597.3.4.3.3 | DisplayString | read-write | current |
| mbgLtCfgSNMP OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.4 | |||
| mbgLtCfgSNMPTrapReceiver1 OBJECT-TYPE First SNMP trap receiver host | 1.3.6.1.4.1.5597.3.4.4.1 | DisplayString | read-write | current |
| mbgLtCfgSNMPTrapReceiver2 OBJECT-TYPE Second SNMP trap receiver host | 1.3.6.1.4.1.5597.3.4.4.2 | DisplayString | read-write | current |
| mbgLtCfgSNMPTrapRec1Community OBJECT-TYPE First SNMP trap receiver community | 1.3.6.1.4.1.5597.3.4.4.3 | DisplayString | read-write | current |
| mbgLtCfgSNMPTrapRec2Community OBJECT-TYPE Second SNMP trap receiver community | 1.3.6.1.4.1.5597.3.4.4.4 | DisplayString | read-write | current |
| mbgLtCfgSNMPReadOnlyCommunity OBJECT-TYPE SNMP community string for read-only access | 1.3.6.1.4.1.5597.3.4.4.5 | DisplayString | read-write | current |
| mbgLtCfgSNMPReadWriteCommunity OBJECT-TYPE SNMP community string for read-write access | 1.3.6.1.4.1.5597.3.4.4.6 | DisplayString | read-write | current |
| mbgLtCfgSNMPContact OBJECT-TYPE SNMP contact string for Lantime | 1.3.6.1.4.1.5597.3.4.4.7 | DisplayString | read-write | current |
| mbgLtCfgSNMPLocation OBJECT-TYPE SNMP location string for Lantime | 1.3.6.1.4.1.5597.3.4.4.8 | DisplayString | read-write | current |
| mbgLtCfgWinpopup OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.5 | |||
| mbgLtCfgWMailAddress1 OBJECT-TYPE First windows popup alert receiver | 1.3.6.1.4.1.5597.3.4.5.1 | DisplayString | read-write | current |
| mbgLtCfgWMailAddress2 OBJECT-TYPE Second windows popup alert receiver | 1.3.6.1.4.1.5597.3.4.5.2 | DisplayString | read-write | current |
| mbgLtCfgWalldisplay OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.6 | |||
| mbgLtCfgVP100Display1IP OBJECT-TYPE IP address of first VP100 wall display | 1.3.6.1.4.1.5597.3.4.6.1 | DisplayString | read-write | current |
| mbgLtCfgVP100Display1SN OBJECT-TYPE Serial number of first VP100 wall display | 1.3.6.1.4.1.5597.3.4.6.2 | DisplayString | read-write | current |
| mbgLtCfgVP100Display2IP OBJECT-TYPE IP address of second VP100 wall display | 1.3.6.1.4.1.5597.3.4.6.3 | DisplayString | read-write | current |
| mbgLtCfgVP100Display2SN OBJECT-TYPE Serial number of second VP100 wall display | 1.3.6.1.4.1.5597.3.4.6.4 | DisplayString | read-write | current |
| mbgLtCfgNotify OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.7 | |||
| mbgLtCfgNotifyNTPNotSync OBJECT-TYPE Which alerts are sent in case of a NTP_not_sync event | 1.3.6.1.4.1.5597.3.4.7.1 | DisplayString | read-write | current |
| mbgLtCfgNotifyNTPStopped OBJECT-TYPE Which alerts are sent in case of a NTP_stopped event | 1.3.6.1.4.1.5597.3.4.7.2 | DisplayString | read-write | current |
| mbgLtCfgNotifyServerBoot OBJECT-TYPE Which alerts are sent in case of a server_boot event | 1.3.6.1.4.1.5597.3.4.7.3 | DisplayString | read-write | current |
| mbgLtCfgNotifyRefclkNoResponse OBJECT-TYPE Which alerts are sent in case of a refclock_not_responding event | 1.3.6.1.4.1.5597.3.4.7.4 | DisplayString | read-write | current |
| mbgLtCfgNotifyRefclockNotSync OBJECT-TYPE Which alerts are sent in case of a refclock_not_sync event | 1.3.6.1.4.1.5597.3.4.7.5 | DisplayString | read-write | current |
| mbgLtCfgNotifyAntennaFaulty OBJECT-TYPE Which alerts are sent in case of an antenna_faulty event | 1.3.6.1.4.1.5597.3.4.7.6 | DisplayString | read-write | current |
| mbgLtCfgNotifyAntennaReconnect OBJECT-TYPE Which alerts are sent in case of an antenna_reconnect event | 1.3.6.1.4.1.5597.3.4.7.7 | DisplayString | read-write | current |
| mbgLtCfgNotifyConfigChanged OBJECT-TYPE Which alerts are sent in case of a config_changed event | 1.3.6.1.4.1.5597.3.4.7.8 | DisplayString | read-write | current |
| mbgLtCfgNotifySHSTimeLimitError OBJECT-TYPE Which alerts are sent in case of a SHS_timelimiterror event | 1.3.6.1.4.1.5597.3.4.7.9 | DisplayString | read-write | current |
| mbgLtCfgNotifyLeapSecond OBJECT-TYPE Which alerts are sent in case of a Leap_Second_Announced event | 1.3.6.1.4.1.5597.3.4.7.10 | DisplayString | read-write | current |
| mbgLtCfgEthernet OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.8 | |||
| mbgLtCfgEthernetIf0 OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.8.0 | |||
| mbgLtCfgEthernetIf0IPv4IP OBJECT-TYPE The IPv4 address of the first ethernet interface | 1.3.6.1.4.1.5597.3.4.8.0.1 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf0IPv4Netmask OBJECT-TYPE The IPv4 netmask of the first ethernet interface | 1.3.6.1.4.1.5597.3.4.8.0.2 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf0IPv4Gateway OBJECT-TYPE The IPv4 gateway address of the first ethernet interface | 1.3.6.1.4.1.5597.3.4.8.0.3 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf0DHCPClient OBJECT-TYPE Is DHCP used to get IP parameters for this interface | 1.3.6.1.4.1.5597.3.4.8.0.4 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgEthernetIf0IPv6IP1 OBJECT-TYPE The first IPv6 address of the first ethernet interface | 1.3.6.1.4.1.5597.3.4.8.0.5 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf0IPv6IP2 OBJECT-TYPE The second IPv6 address of the first ethernet interface | 1.3.6.1.4.1.5597.3.4.8.0.6 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf0IPv6IP3 OBJECT-TYPE The third IPv6 address of the first ethernet interface | 1.3.6.1.4.1.5597.3.4.8.0.7 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf0IPv6Autoconf OBJECT-TYPE Is IPv6 Autoconf used for this interface | 1.3.6.1.4.1.5597.3.4.8.0.8 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgEthernetIf0NetLinkMode OBJECT-TYPE Link mode for this interface | 1.3.6.1.4.1.5597.3.4.8.0.9 | INTEGER {autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4)} | read-write | current |
| mbgLtCfgEthernetIf1 OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.8.1 | |||
| mbgLtCfgEthernetIf1IPv4IP OBJECT-TYPE The IPv4 address of the second ethernet interface | 1.3.6.1.4.1.5597.3.4.8.1.1 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf1IPv4Netmask OBJECT-TYPE The IPv4 netmask of the second ethernet interface | 1.3.6.1.4.1.5597.3.4.8.1.2 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf1IPv4Gateway OBJECT-TYPE The IPv4 gateway address of the second ethernet interface | 1.3.6.1.4.1.5597.3.4.8.1.3 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf1DHCPClient OBJECT-TYPE Is DHCP used to get IP parameters for this interface | 1.3.6.1.4.1.5597.3.4.8.1.4 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgEthernetIf1IPv6IP1 OBJECT-TYPE The first IPv6 address of the second ethernet interface | 1.3.6.1.4.1.5597.3.4.8.1.5 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf1IPv6IP2 OBJECT-TYPE The second IPv6 address of the second ethernet interface | 1.3.6.1.4.1.5597.3.4.8.1.6 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf1IPv6IP3 OBJECT-TYPE The third IPv6 address of the second ethernet interface | 1.3.6.1.4.1.5597.3.4.8.1.7 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf1IPv6Autoconf OBJECT-TYPE Is IPv6 Autoconf used for this interface | 1.3.6.1.4.1.5597.3.4.8.1.8 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgEthernetIf1NetLinkMode OBJECT-TYPE Link mode for this interface | 1.3.6.1.4.1.5597.3.4.8.1.9 | INTEGER {autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4)} | read-write | current |
| mbgLtCfgEthernetIf2 OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.8.2 | |||
| mbgLtCfgEthernetIf2IPv4IP OBJECT-TYPE The IPv4 address of the third ethernet interface | 1.3.6.1.4.1.5597.3.4.8.2.1 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf2IPv4Netmask OBJECT-TYPE The IPv4 netmask of the third ethernet interface | 1.3.6.1.4.1.5597.3.4.8.2.2 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf2IPv4Gateway OBJECT-TYPE The IPv4 gateway address of the third ethernet interface | 1.3.6.1.4.1.5597.3.4.8.2.3 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf2DHCPClient OBJECT-TYPE Is DHCP used to get IP parameters for this interface | 1.3.6.1.4.1.5597.3.4.8.2.4 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgEthernetIf2IPv6IP1 OBJECT-TYPE The first IPv6 address of the third ethernet interface | 1.3.6.1.4.1.5597.3.4.8.2.5 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf2IPv6IP2 OBJECT-TYPE The second IPv6 address of the third ethernet interface | 1.3.6.1.4.1.5597.3.4.8.2.6 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf2IPv6IP3 OBJECT-TYPE The third IPv6 address of the third ethernet interface | 1.3.6.1.4.1.5597.3.4.8.2.7 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf2IPv6Autoconf OBJECT-TYPE Is IPv6 Autoconf used for this interface | 1.3.6.1.4.1.5597.3.4.8.2.8 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgEthernetIf2NetLinkMode OBJECT-TYPE Link mode for this interface | 1.3.6.1.4.1.5597.3.4.8.2.9 | INTEGER {autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4)} | read-write | current |
| mbgLtCfgEthernetIf3 OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.8.3 | |||
| mbgLtCfgEthernetIf3IPv4IP OBJECT-TYPE The IPv4 address of the fourth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.3.1 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf3IPv4Netmask OBJECT-TYPE The IPv4 netmask of the fourth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.3.2 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf3IPv4Gateway OBJECT-TYPE The IPv4 gateway address of the fourth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.3.3 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf3DHCPClient OBJECT-TYPE Is DHCP used to get IP parameters for this interface | 1.3.6.1.4.1.5597.3.4.8.3.4 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgEthernetIf3IPv6IP1 OBJECT-TYPE The first IPv6 address of the fourth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.3.5 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf3IPv6IP2 OBJECT-TYPE The second IPv6 address of the fourth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.3.6 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf3IPv6IP3 OBJECT-TYPE The third IPv6 address of the fourth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.3.7 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf3IPv6Autoconf OBJECT-TYPE Is IPv6 Autoconf used for this interface | 1.3.6.1.4.1.5597.3.4.8.3.8 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgEthernetIf3NetLinkMode OBJECT-TYPE Link mode for this interface | 1.3.6.1.4.1.5597.3.4.8.3.9 | INTEGER {autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4)} | read-write | current |
| mbgLtCfgEthernetIf4 OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.8.4 | |||
| mbgLtCfgEthernetIf4IPv4IP OBJECT-TYPE The IPv4 address of the fifth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.4.1 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf4IPv4Netmask OBJECT-TYPE The IPv4 netmask of the fifth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.4.2 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf4IPv4Gateway OBJECT-TYPE The IPv4 gateway address of the fifth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.4.3 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf4DHCPClient OBJECT-TYPE Is DHCP used to get IP parameters for this interface | 1.3.6.1.4.1.5597.3.4.8.4.4 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgEthernetIf4IPv6IP1 OBJECT-TYPE The first IPv6 address of the fifth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.4.5 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf4IPv6IP2 OBJECT-TYPE The second IPv6 address of the fifth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.4.6 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf4IPv6IP3 OBJECT-TYPE The third IPv6 address of the fifth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.4.7 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf4IPv6Autoconf OBJECT-TYPE Is IPv6 Autoconf used for this interface | 1.3.6.1.4.1.5597.3.4.8.4.8 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgEthernetIf4NetLinkMode OBJECT-TYPE Link mode for this interface | 1.3.6.1.4.1.5597.3.4.8.4.9 | INTEGER {autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4)} | read-write | current |
| mbgLtCfgEthernetIf5 OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.8.5 | |||
| mbgLtCfgEthernetIf5IPv4IP OBJECT-TYPE The IPv4 address of the sixth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.5.1 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf5IPv4Netmask OBJECT-TYPE The IPv4 netmask of the sixth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.5.2 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf5IPv4Gateway OBJECT-TYPE The IPv4 gateway address of the sixth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.5.3 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf5DHCPClient OBJECT-TYPE Is DHCP used to get IP parameters for this interface | 1.3.6.1.4.1.5597.3.4.8.5.4 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgEthernetIf5IPv6IP1 OBJECT-TYPE The first IPv6 address of the sixth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.5.5 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf5IPv6IP2 OBJECT-TYPE The second IPv6 address of the sixth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.5.6 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf5IPv6IP3 OBJECT-TYPE The third IPv6 address of the sixth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.5.7 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf5IPv6Autoconf OBJECT-TYPE Is IPv6 Autoconf used for this interface | 1.3.6.1.4.1.5597.3.4.8.5.8 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgEthernetIf5NetLinkMode OBJECT-TYPE Link mode for this interface | 1.3.6.1.4.1.5597.3.4.8.5.9 | INTEGER {autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4)} | read-write | current |
| mbgLtCfgEthernetIf6 OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.8.6 | |||
| mbgLtCfgEthernetIf6IPv4IP OBJECT-TYPE The IPv4 address of the seventh ethernet interface | 1.3.6.1.4.1.5597.3.4.8.6.1 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf6IPv4Netmask OBJECT-TYPE The IPv4 netmask of the seventh ethernet interface | 1.3.6.1.4.1.5597.3.4.8.6.2 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf6IPv4Gateway OBJECT-TYPE The IPv4 gateway address of the seventh ethernet interface | 1.3.6.1.4.1.5597.3.4.8.6.3 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf6DHCPClient OBJECT-TYPE Is DHCP used to get IP parameters for this interface | 1.3.6.1.4.1.5597.3.4.8.6.4 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgEthernetIf6IPv6IP1 OBJECT-TYPE The first IPv6 address of the seventh ethernet interface | 1.3.6.1.4.1.5597.3.4.8.6.5 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf6IPv6IP2 OBJECT-TYPE The second IPv6 address of the seventh ethernet interface | 1.3.6.1.4.1.5597.3.4.8.6.6 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf6IPv6IP3 OBJECT-TYPE The third IPv6 address of the seventh ethernet interface | 1.3.6.1.4.1.5597.3.4.8.6.7 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf6IPv6Autoconf OBJECT-TYPE Is IPv6 Autoconf used for this interface | 1.3.6.1.4.1.5597.3.4.8.6.8 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgEthernetIf6NetLinkMode OBJECT-TYPE Link mode for this interface | 1.3.6.1.4.1.5597.3.4.8.6.9 | INTEGER {autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4)} | read-write | current |
| mbgLtCfgEthernetIf7 OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.8.7 | |||
| mbgLtCfgEthernetIf7IPv4IP OBJECT-TYPE The IPv4 address of the eighth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.7.1 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf7IPv4Netmask OBJECT-TYPE The IPv4 netmask of the eighth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.7.2 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf7IPv4Gateway OBJECT-TYPE The IPv4 gateway address of the eighth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.7.3 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf7DHCPClient OBJECT-TYPE Is DHCP used to get IP parameters for this interface | 1.3.6.1.4.1.5597.3.4.8.7.4 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgEthernetIf7IPv6IP1 OBJECT-TYPE The first IPv6 address of the eighth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.7.5 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf7IPv6IP2 OBJECT-TYPE The second IPv6 address of the eighth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.7.6 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf7IPv6IP3 OBJECT-TYPE The third IPv6 address of the eighth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.7.7 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf7IPv6Autoconf OBJECT-TYPE Is IPv6 Autoconf used for this interface | 1.3.6.1.4.1.5597.3.4.8.7.8 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgEthernetIf7NetLinkMode OBJECT-TYPE Link mode for this interface | 1.3.6.1.4.1.5597.3.4.8.7.9 | INTEGER {autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4)} | read-write | current |
| mbgLtCfgEthernetIf8 OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.8.8 | |||
| mbgLtCfgEthernetIf8IPv4IP OBJECT-TYPE The IPv4 address of the nineth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.8.1 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf8IPv4Netmask OBJECT-TYPE The IPv4 netmask of the nineth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.8.2 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf8IPv4Gateway OBJECT-TYPE The IPv4 gateway address of the nineth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.8.3 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf8DHCPClient OBJECT-TYPE Is DHCP used to get IP parameters for this interface | 1.3.6.1.4.1.5597.3.4.8.8.4 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgEthernetIf8IPv6IP1 OBJECT-TYPE The first IPv6 address of the nineth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.8.5 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf8IPv6IP2 OBJECT-TYPE The second IPv6 address of the nineth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.8.6 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf8IPv6IP3 OBJECT-TYPE The third IPv6 address of the nineth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.8.7 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf8IPv6Autoconf OBJECT-TYPE Is IPv6 Autoconf used for this interface | 1.3.6.1.4.1.5597.3.4.8.8.8 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgEthernetIf8NetLinkMode OBJECT-TYPE Link mode for this interface | 1.3.6.1.4.1.5597.3.4.8.8.9 | INTEGER {autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4)} | read-write | current |
| mbgLtCfgEthernetIf9 OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.8.9 | |||
| mbgLtCfgEthernetIf9IPv4IP OBJECT-TYPE The IPv4 address of the tenth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.9.1 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf9IPv4Netmask OBJECT-TYPE The IPv4 netmask of the tenth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.9.2 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf9IPv4Gateway OBJECT-TYPE The IPv4 gateway address of the tenth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.9.3 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf9DHCPClient OBJECT-TYPE Is DHCP used to get IP parameters for this interface | 1.3.6.1.4.1.5597.3.4.8.9.4 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgEthernetIf9IPv6IP1 OBJECT-TYPE The first IPv6 address of the tenth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.9.5 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf9IPv6IP2 OBJECT-TYPE The second IPv6 address of the tenth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.9.6 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf9IPv6IP3 OBJECT-TYPE The third IPv6 address of the tenth ethernet interface | 1.3.6.1.4.1.5597.3.4.8.9.7 | DisplayString | read-write | current |
| mbgLtCfgEthernetIf9IPv6Autoconf OBJECT-TYPE Is IPv6 Autoconf used for this interface | 1.3.6.1.4.1.5597.3.4.8.9.8 | INTEGER {disabled(0), enabled(1)} | read-write | current |
| mbgLtCfgEthernetIf9NetLinkMode OBJECT-TYPE Link mode for this interface | 1.3.6.1.4.1.5597.3.4.8.9.9 | INTEGER {autosensing(0), link10half(1), link10full(2), link100half(3), link100full(4)} | read-write | current |
| mbgLtCfgSHS OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.9 | |||
| mbgLtCfgSHSCritLimit OBJECT-TYPE Max. number of milliseconds the two SHS references can differ before a SHS Critical Timelimit error is issued | 1.3.6.1.4.1.5597.3.4.9.1 | Integer32 (-2147483648..2147483647) | read-write | current |
| mbgLtCfgSHSWarnLimit OBJECT-TYPE Max. number of milliseconds the two SHS references can differ before a SHS Warning Timelimit error is issued | 1.3.6.1.4.1.5597.3.4.9.2 | Integer32 (-2147483648..2147483647) | read-write | current |
| mbgLtCfgMRS OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.4.10 | |||
| mbgLtCfgMRSRefPriority OBJECT-TYPE Priority of MRS Reference Sources, as a comma-separated list | 1.3.6.1.4.1.5597.3.4.10.1 | DisplayString | read-write | current |
| mbgLtCmd OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.5 | |||
| mbgLtCmdExecute OBJECT-TYPE Send a command to the timeserver to be executed | 1.3.6.1.4.1.5597.3.5.1 | INTEGER {ready(0), doReboot(1), doFirmwareUpdate(2), doReloadConfig(3), doGenerateSSHKey(4), doGenerateHTTPSKey(5), doResetFactoryDefaults(6), doGenerateNewNTPAutokeyCert(7), doSendTestNotification(8), doResetSHSTimeLimitError(9)} | read-write | current |
| mbgLtCmdSetRefTime OBJECT-TYPE Set the time of the reference clock and the LANTIME itself | 1.3.6.1.4.1.5597.3.5.2 | DisplayString | read-write | current |
| mbgLtPtp OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.10 | |||
| mbgLtPtpMode OBJECT-TYPE Display current PTPv2 modus as string | 1.3.6.1.4.1.5597.3.10.1 | DisplayString | read-only | current |
| mbgLtPtpModeVal OBJECT-TYPE Display current PTPv2 modus as integer | 1.3.6.1.4.1.5597.3.10.2 | INTEGER {stopped(0), master(1), slave(2), ordinary(3)} | read-only | current |
| mbgLtPtpPortState OBJECT-TYPE Current PTPv2 port state as string | 1.3.6.1.4.1.5597.3.10.3 | DisplayString | read-only | current |
| mbgLtPtpPortStateVal OBJECT-TYPE Current PTPv2 port state as integer | 1.3.6.1.4.1.5597.3.10.4 | INTEGER {uncalibrated(0), initializing(1), listening(2), master(3), slave(4), unicastmaster(5), unicastslave(6)} | read-only | current |
| mbgLtPtpOffsetFromGM OBJECT-TYPE Current PTPv2 offset from grandmaster as string | 1.3.6.1.4.1.5597.3.10.5 | DisplayString | read-only | current |
| mbgLtPtpOffsetFromGMVal OBJECT-TYPE Current PTPv2 offset from grandmaster in nanoseconds | 1.3.6.1.4.1.5597.3.10.6 | Integer32 (-2147483648..2147483647) | read-only | current |
| mbgLtPtpDelay OBJECT-TYPE shows the current network delay in nanoseconds as string | 1.3.6.1.4.1.5597.3.10.7 | DisplayString | read-only | current |
| mbgLtPtpDelayVal OBJECT-TYPE shows the current network delay in nanoseconds | 1.3.6.1.4.1.5597.3.10.8 | Integer32 (-2147483648..2147483647) | read-only | current |
| mbgLtFdm OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.11 | |||
| mbgLtFdmPlFreq OBJECT-TYPE shows the current powerline frequency in mHz as an Integer32 value | 1.3.6.1.4.1.5597.3.11.1 | Integer32 (-2147483648..2147483647) | read-only | current |
| mbgLtFdmFreqDev OBJECT-TYPE shows the current frequency deviation in mHz as an Integer32 value | 1.3.6.1.4.1.5597.3.11.2 | Integer32 (-2147483648..2147483647) | read-only | current |
| mbgLtFdmNomFreq OBJECT-TYPE shows the nominal frequency in mHz as an Integer32 value | 1.3.6.1.4.1.5597.3.11.3 | Integer32 (-2147483648..2147483647) | read-only | current |
| mbgLtConformance OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.90 | |||
| mbgLtCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.90.1 | |||
| mbgLtGroups OBJECT-IDENTITY | 1.3.6.1.4.1.5597.3.90.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| mbgLtTrapNTPNotSync NOTIFICATION-TYPE trap to be sent when NTP is not synchronised | 1.3.6.1.4.1.5597.3.3.0.1 | current |
| mbgLtTrapNTPStopped NOTIFICATION-TYPE trap to be sent when NTP is stopped | 1.3.6.1.4.1.5597.3.3.0.2 | current |
| mbgLtTrapServerBoot NOTIFICATION-TYPE trap to be sent when time server has finished boot sequence | 1.3.6.1.4.1.5597.3.3.0.3 | current |
| mbgLtTrapReceiverNotResponding NOTIFICATION-TYPE trap to be sent when receiver is not responding | 1.3.6.1.4.1.5597.3.3.0.4 | current |
| mbgLtTrapReceiverNotSync NOTIFICATION-TYPE trap to be sent when receiver is not synchronised | 1.3.6.1.4.1.5597.3.3.0.5 | current |
| mbgLtTrapAntennaFaulty NOTIFICATION-TYPE trap to be sent when connection to antenna is broken | 1.3.6.1.4.1.5597.3.3.0.6 | current |
| mbgLtTrapAntennaReconnect NOTIFICATION-TYPE trap to be sent when antenna has been reconnected | 1.3.6.1.4.1.5597.3.3.0.7 | current |
| mbgLtTrapConfigChanged NOTIFICATION-TYPE trap to be sent when timeserver reloaded its configuration | 1.3.6.1.4.1.5597.3.3.0.8 | current |
| mbgLtTrapLeapSecondAnnounced NOTIFICATION-TYPE trap to be sent when a leap second has been announced | 1.3.6.1.4.1.5597.3.3.0.9 | current |
| mbgLtTrapSHSTimeLimitError NOTIFICATION-TYPE trap to be sent when SHS timelimit exceeded | 1.3.6.1.4.1.5597.3.3.0.10 | current |
| mbgLtTrapSecondaryRecNotSync NOTIFICATION-TYPE trap to be sent when secondary receiver in SHS system is not synchronised | 1.3.6.1.4.1.5597.3.3.0.11 | current |
| mbgLtTrapPowerSupplyFailure NOTIFICATION-TYPE trap to be sent when one of the redundant power supplies fails | 1.3.6.1.4.1.5597.3.3.0.12 | current |
| mbgLtTrapAntennaShortCircuit NOTIFICATION-TYPE trap to be sent when a connected antenna fails due to a short circuit | 1.3.6.1.4.1.5597.3.3.0.13 | current |
| mbgLtTrapReceiverSync NOTIFICATION-TYPE trap to be sent when receiver is synchronised | 1.3.6.1.4.1.5597.3.3.0.14 | current |
| mbgLtTrapNTPClientAlarm NOTIFICATION-TYPE trap to be sent when an NTP Client Monitoring alarm occurs, e.g. when a monitored client is not reachable. | 1.3.6.1.4.1.5597.3.3.0.15 | current |
| mbgLtTrapPowerSupplyUp NOTIFICATION-TYPE trap to be sent when a power supply returned to a healthy state. | 1.3.6.1.4.1.5597.3.3.0.16 | current |
| mbgLtTrapNetworkDown NOTIFICATION-TYPE trap to be sent when a monitored network port is down. | 1.3.6.1.4.1.5597.3.3.0.17 | current |
| mbgLtTrapNetworkUp NOTIFICATION-TYPE trap to be sent when a monitored network port is up. | 1.3.6.1.4.1.5597.3.3.0.18 | current |
| mbgLtTrapSecondaryRecNotResp NOTIFICATION-TYPE trap to be sent when secondary receiver is not responding | 1.3.6.1.4.1.5597.3.3.0.19 | current |
| mbgLtTrapXmrLimitExceeded NOTIFICATION-TYPE trap to be sent when a reference offset exceeds the configured limit | 1.3.6.1.4.1.5597.3.3.0.30 | current |
| mbgLtTrapXmrRefDisconnect NOTIFICATION-TYPE trap to be sent when a reference signal has been lost | 1.3.6.1.4.1.5597.3.3.0.31 | current |
| mbgLtTrapXmrRefReconnect NOTIFICATION-TYPE trap to be sent when a reference signal recovered | 1.3.6.1.4.1.5597.3.3.0.32 | current |
| mbgLtTrapFdmError NOTIFICATION-TYPE trap to be sent when the Fdm module generates an alarm | 1.3.6.1.4.1.5597.3.3.0.33 | current |
| mbgLtTrapSHSTimeLimitWarning NOTIFICATION-TYPE trap to be sent when SHS warning limit exceeded | 1.3.6.1.4.1.5597.3.3.0.34 | current |
| mbgLtTrapSecondaryRecSync NOTIFICATION-TYPE trap to be sent when secondary receiver is synchronised | 1.3.6.1.4.1.5597.3.3.0.35 | current |
| mbgLtTrapNTPSync NOTIFICATION-TYPE trap to be sent when NTP is synchronised | 1.3.6.1.4.1.5597.3.3.0.36 | current |
| mbgLtTrapPtpPortDisconnected NOTIFICATION-TYPE trap to be sent when PTP network port got disconnected | 1.3.6.1.4.1.5597.3.3.0.37 | current |
| mbgLtTrapPtpPortConnected NOTIFICATION-TYPE trap to be sent when PTP network port got connected | 1.3.6.1.4.1.5597.3.3.0.38 | current |
| mbgLtTrapPtpStateChanged NOTIFICATION-TYPE trap to be sent when PTP state changed (e.g. from 'passive' to 'master') | 1.3.6.1.4.1.5597.3.3.0.39 | current |
| mbgLtTrapPtpError NOTIFICATION-TYPE trap to be sent when PTP raised an error | 1.3.6.1.4.1.5597.3.3.0.40 | current |
| mbgLtTrapNormalOperation NOTIFICATION-TYPE trap to be sent when the system returned to a healthy state | 1.3.6.1.4.1.5597.3.3.0.77 | current |
| mbgLtTrapHeartbeat NOTIFICATION-TYPE trap to be sent periodically to indicate that time server is still alive | 1.3.6.1.4.1.5597.3.3.0.88 | current |
| mbgLtTrapTestNotification NOTIFICATION-TYPE trap to be sent when a test notification has been requested | 1.3.6.1.4.1.5597.3.3.0.99 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| mbgLtCompliance MODULE-COMPLIANCE The compliance statement for SNMP entities which implement version 2 of the LANTIME MIB | 1.3.6.1.4.1.5597.3.90.1.1 | current |
| mbgLtObjectsGroup OBJECT-GROUP The collection of objects for the LANTIME MIB | 1.3.6.1.4.1.5597.3.90.2.1 | current |
| mbgLtTrapsGroup NOTIFICATION-GROUP The collection of traps for the LANTIME MIB | 1.3.6.1.4.1.5597.3.90.2.2 | current |