LOOPBACK-DETECT-MIB
- Registered at
- 1.3.6.1.4.1.171.12.41
- Last updated
- 1910-03-01 00:00
- Organization
- D-Link Corp.
- Namespace
- dlink
- Source file
LOOPBACK-DETECT-MIB- Digest
sha256:e64674bbc7a8a443669d18aceb8003f7279fca9b4a0710c30a4014f2eda69031
Description
The structure of loopback detection management for the proprietary enterprise.
Contact
http://support.dlink.com
Imports
| From | Symbols |
|---|---|
| DLINK-ID-REC-MIB | dlink-common-mgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
DLINK-ID-REC-MIB LOOPBACK-DETECT-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| swLoopDetectCtrl OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.41.1 | |||
| swLoopDetectAdminState OBJECT-TYPE This object indicates the loopback detection status for the system. | 1.3.6.1.4.1.171.12.41.1.1 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| swLoopDetectInterval OBJECT-TYPE This object indicates the interval value. The range is from 1 to 32767 seconds. | 1.3.6.1.4.1.171.12.41.1.2 | INTEGER (1..32767) | read-write | current |
| swLoopDetectRecoverTime OBJECT-TYPE This object indicates the recover time. The range is from 60 to 1000000. The value of 0 disables the recover function. | 1.3.6.1.4.1.171.12.41.1.3 | INTEGER (0..1000000) | read-write | current |
| swLoopDetectMode OBJECT-TYPE This object indicates the loopback detection mode for the system. | 1.3.6.1.4.1.171.12.41.1.4 | INTEGER {vlan-based(1), port-based(2)} | read-write | current |
| swLoopDetectTrapMode OBJECT-TYPE This object indicates the loopback detection trap mode for the system. | 1.3.6.1.4.1.171.12.41.1.5 | INTEGER {none(1), loop-detected(2), loop-cleared(3), both(4)} | read-write | current |
| swLoopDetectLogState OBJECT-TYPE This object indicates the LBD log state. | 1.3.6.1.4.1.171.12.41.1.6 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| swLoopDetectInfo OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.41.2 | |||
| swLoopDetectPortMgmt OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.41.3 | |||
| swLoopDetectPortTable OBJECT-TYPE The table specifies the loopback detection function specified by port. | 1.3.6.1.4.1.171.12.41.3.1 | not-accessible | current | |
| swLoopDetectPortEntry OBJECT-TYPE The table specifies the loopback detection function specified by port. | 1.3.6.1.4.1.171.12.41.3.1.1 | not-accessible | current | |
| swLoopDetectPortIndex OBJECT-TYPE This object indicates the module's port number. The range is from 1 to the maximum port number specified in the module | 1.3.6.1.4.1.171.12.41.3.1.1.1 | INTEGER (1..65535) | read-only | current |
| swLoopDetectPortState OBJECT-TYPE This object indicates the loopback detection function state on the port. | 1.3.6.1.4.1.171.12.41.3.1.1.2 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| swLoopDetectPortLoopVLAN OBJECT-TYPE This object indicates the VLAN list that has detected a loopback. | 1.3.6.1.4.1.171.12.41.3.1.1.3 | DisplayString | read-only | current |
| swLoopDetectPortLoopStatus OBJECT-TYPE This object indicates the port status. | 1.3.6.1.4.1.171.12.41.3.1.1.4 | INTEGER {normal(1), loop(2), error(3)} | read-only | current |
| swLoopDetectNotify OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.41.10 | |||
| swLoopDetectNotifyPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.41.10.0 | |||
| swLoopDetectNotificationBidings OBJECT-IDENTITY | 1.3.6.1.4.1.171.12.41.10.1 | |||
| swVlanLoopDetectVID OBJECT-TYPE This object indicates the VID that has detected a loopback. | 1.3.6.1.4.1.171.12.41.10.1.1 | INTEGER | accessible-for-notify | current |
Notifications
| Name | OID | Status |
|---|---|---|
| swPortLoopOccurred NOTIFICATION-TYPE The trap is sent when a port loop occurs. | 1.3.6.1.4.1.171.12.41.10.0.1 | current |
| swPortLoopRestart NOTIFICATION-TYPE The trap is sent when a port loop restarts after the interval time. | 1.3.6.1.4.1.171.12.41.10.0.2 | current |
| swVlanLoopOccurred NOTIFICATION-TYPE The trap is sent when a Port with a VID loop occurs. | 1.3.6.1.4.1.171.12.41.10.0.3 | current |
| swVlanLoopRestart NOTIFICATION-TYPE The trap is sent when a Port with a VID loop restarts after the interval time. | 1.3.6.1.4.1.171.12.41.10.0.4 | current |