LLDP-EXT-PNO-MIB
- Registered at
- 1.0.8802.1.1.2.1.5.3791
- Last updated
- 2006-03-09 00:00
- Organization
- PROFIBUS International (PNO)
- Revisions
- 2006-03-09 00:00, 2006-02-28 00:00, 2005-08-31 00:00, 2005-05-30 00:00
- Namespace
- standard
- Source file
LLDP-EXT-PNO-MIB- Digest
sha256:435d73f0188301376ea08336e62ea7eaeb6d5209862461e0c3e4fd1aa42a0d03
Description
The LLDP Management Information Base extension module for PROFINET organizationally defined discovery information. Copyright (C) PROFIBUS Nutzerorganisation e.V. (2005).
Contact
URL: http://www.profibus.com email: info@profibus.com Postal: Haid-und-Neu-Strasse 7 D-76131 Karlsruhe Tel: ++49 721 9658 - 590
Imports
| From | Symbols |
|---|---|
| LLDP-MIB | lldpExtensions, lldpLocPortNum, lldpPortConfigEntry, lldpRemIndex, lldpRemLocalPortNum, lldpRemTimeMark |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANA-ADDRESS-FAMILY-NUMBERS-MIB IANAifType-MIB IF-MIB LLDP-EXT-PNO-MIB LLDP-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| lldpXPnoObjects OBJECT-IDENTITY | 1.0.8802.1.1.2.1.5.3791.1 | |||
| lldpXPnoConfig OBJECT-IDENTITY | 1.0.8802.1.1.2.1.5.3791.1.1 | |||
| lldpXPnoConfigTable OBJECT-TYPE A table that controls selection of LLDP TLVs to be transmitted on individual ports. | 1.0.8802.1.1.2.1.5.3791.1.1.1 | not-accessible | current | |
| lldpXPnoConfigEntry OBJECT-TYPE LLDP configuration information that controls the transmission of PNO organizationally defined TLVs on LLDP transmission capable ports. This configuration object augments the lldpPortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpPortConfigEntry entry. Each active lldpXPnoConfigEntry must be restored from non-volatile storage (along with the corresponding lldpPortConfigEntry) after a re-initialization of the management system. | 1.0.8802.1.1.2.1.5.3791.1.1.1.1 | not-accessible | current | |
| lldpXPnoConfigSPDTxEnable OBJECT-TYPE The lldpXPnoConfigSPDTxEnable, which is defined as a truth value and configured by the network management, determines whether the PNO organizationally defined signal propagation delay TLV transmission is allowed on a given LLDP transmission capable port. The signal propagation delay is composed of the port transmission delay, the port receiving delay and the line delay. These values can't be transmitted independently of each other. The value of this object must be restored from nonvolatile storage after a re-initialization of the management system. | 1.0.8802.1.1.2.1.5.3791.1.1.1.1.1 | TruthValue | read-write | current |
| lldpXPnoConfigPortStatusTxEnable OBJECT-TYPE The lldpXPnoConfigPortStatusTxEnable, which is defined as a truth value and configured by the network management, determines whether the PNO organizationally defined RT port status TLV transmission is allowed on a given LLDP transmission capable port. The value of this object must be restored from nonvolatile storage after a re-initialization of the management system. | 1.0.8802.1.1.2.1.5.3791.1.1.1.1.2 | TruthValue | read-write | current |
| lldpXPnoConfigAliasTxEnable OBJECT-TYPE The lldpXPnoConfigAliasTxEnable, which is defined as a truth value and configured by the network management, determines whether the PNO organizationally defined alias TLV (chassisId) transmission is allowed on a given LLDP transmission capable port. The value of this object must be restored from nonvolatile storage after a re-initialization of the management system. | 1.0.8802.1.1.2.1.5.3791.1.1.1.1.3 | TruthValue | read-write | current |
| lldpXPnoConfigMrpTxEnable OBJECT-TYPE The lldpXPnoConfigMrpTxEnable, which is defined as a truth value and configured by the network management, determines whether the PNO organizationally defined MRP TLV transmission is allowed on a given LLDP transmission capable port. The value of this object must be restored from nonvolatile storage after a re-initialization of the management system. | 1.0.8802.1.1.2.1.5.3791.1.1.1.1.4 | TruthValue | read-write | current |
| lldpXPnoLocalData OBJECT-IDENTITY | 1.0.8802.1.1.2.1.5.3791.1.2 | |||
| lldpXPnoLocTable OBJECT-TYPE This table contains one row per port for PNO organizationally defined LLDP extension on the local system known to this agent. | 1.0.8802.1.1.2.1.5.3791.1.2.1 | not-accessible | current | |
| lldpXPnoLocEntry OBJECT-TYPE Additional information about a particular port component. This object is indexed by the lldpLocPortNum of the LLDP-MIB, therefore it is only present along with the port entry defined by the associated lldpLocPortEntry entry. Each active lldpXPnoLocEntry must be restored from non-volatile storage (along with the corresponding lldpLocPortEntry) after a re-initialization of the management system. | 1.0.8802.1.1.2.1.5.3791.1.2.1.1 | not-accessible | current | |
| lldpXPnoLocLPDValue OBJECT-TYPE This integer value represents the line propagation delay in nanoseconds which was measured by the local system on the corresponding port. A value of zero shall be used if the system either could not accomplish the measurement or does not support such a measurement. | 1.0.8802.1.1.2.1.5.3791.1.2.1.1.1 | Unsigned32 | read-only | current |
| lldpXPnoLocPortTxDValue OBJECT-TYPE This integer value represents the PortTxDelay in nanoseconds which was measured by the local system on the corresponding port. A value of zero shall be used if the system either could not accomplish the measurement or does not support such a measurement. | 1.0.8802.1.1.2.1.5.3791.1.2.1.1.2 | Unsigned32 | read-only | current |
| lldpXPnoLocPortRxDValue OBJECT-TYPE This integer value represents the PortRxDelay in nanoseconds which was measured by the local system on the corresponding port. A value of zero shall be used if the system either could not accomplish the measurement or does not support such a measurement. | 1.0.8802.1.1.2.1.5.3791.1.2.1.1.3 | Unsigned32 | read-only | current |
| lldpXPnoLocPortStatusRT2 OBJECT-TYPE This value represents the status of the corresponding port of the local system according to RT class 2. A value of off(0) means that there isn't any RT2 capability available for this port. When the port is configured for RT2 mode, but the mode isn't active yet the value will be configured(1). If the RT2 mode is configured for this port and the mode is active, the value will be running(2). | 1.0.8802.1.1.2.1.5.3791.1.2.1.1.4 | INTEGER {off(0), configured(1), running(2)} | read-only | current |
| lldpXPnoLocPortStatusRT3 OBJECT-TYPE This value represents the status of the corresponding port of the local system according to RT class 3. A value of off(0) means that there isn't any RT3 capability available for this port. When the port is configured for RT3 mode, but the mode isn't active yet the value will be configured(1). When the port is ready for transmission and reception of RT3 traffic, the port status will be running(4). | 1.0.8802.1.1.2.1.5.3791.1.2.1.1.5 | INTEGER {off(0), configured(1), up(2), down(3), running(4)} | read-only | current |
| lldpXPnoLocPortNoS OBJECT-TYPE The local PROFINET NameofStation. If the station isn't configured yet, the value of this object will be the MAC address of the device as a string. | 1.0.8802.1.1.2.1.5.3791.1.2.1.1.6 | DisplayString | read-only | current |
| lldpXPnoLocPortMrpUuId OBJECT-TYPE The UUID of the MRP domain to which this port belongs to. If the port doesn't belong to a MRP domain, the value must be NIL ('0000000000000000'). | 1.0.8802.1.1.2.1.5.3791.1.2.1.1.7 | OCTET STRING (SIZE(16)) | read-only | current |
| lldpXPnoLocPortMrrtStatus OBJECT-TYPE This object reports the status of the MRRT entity of the corresponding port. A value of off(0) means that there isn't any MRRT capability available for this port or it is switched off. The value configured(1) indicates that MRRT is configured for the port. When MRRT is active on the port, the value will be up(2). | 1.0.8802.1.1.2.1.5.3791.1.2.1.1.8 | INTEGER {off(0), configured(1), up(2)} | read-only | current |
| lldpXPnoRemoteData OBJECT-IDENTITY | 1.0.8802.1.1.2.1.5.3791.1.3 | |||
| lldpXPnoRemTable OBJECT-TYPE This table contains one or more rows per physical network connection known to this agent. The agent may wish to ensure that only one lldpXPnoRemEntry is present for each local port, or it may choose to maintain multiple lldpXPnoRemEntries for the same local port. | 1.0.8802.1.1.2.1.5.3791.1.3.1 | not-accessible | current | |
| lldpXPnoRemEntry OBJECT-TYPE Each entry represents the received information of the communication partner on this physical connection. The entries feature multiple indices from the lldpRemEntry of the LLDP-MIB, therefore it is only present along with the description defined by the associated lldpRemEntry entry. | 1.0.8802.1.1.2.1.5.3791.1.3.1.1 | not-accessible | current | |
| lldpXPnoRemLPDValue OBJECT-TYPE This integer value represents the line propagation delay in nanoseconds which was measured by the remote system on the corresponding port. A value of zero shall be used if the remote system either could not accomplish the measurement or does not support such a measurement. | 1.0.8802.1.1.2.1.5.3791.1.3.1.1.1 | Unsigned32 | read-only | current |
| lldpXPnoRemPortTxDValue OBJECT-TYPE This integer value represents the PortTxDelay in nanoseconds which was measured by the remote system on the corresponding port. A value of zero shall be used if the remote system either could not accomplish the measurement or does not support such a measurement. | 1.0.8802.1.1.2.1.5.3791.1.3.1.1.2 | Unsigned32 | read-only | current |
| lldpXPnoRemPortRxDValue OBJECT-TYPE This integer value represents the PortRxDelay in nanoseconds which was measured by the remote system on the corresponding port. A value of zero shall be used if the remote system either could not accomplish the measurement or does not support such a measurement. | 1.0.8802.1.1.2.1.5.3791.1.3.1.1.3 | Unsigned32 | read-only | current |
| lldpXPnoRemPortStatusRT2 OBJECT-TYPE This value represents the status of the corresponding port of the remote system according to RT class 2. A value of off(0) means that there isn't any RT2 capability available for this port. When the port is configured for RT2 mode, but the mode isn't active yet the value will be configured(1). If the RT2 mode is configured for this port and the mode is active, the value will be running(2). | 1.0.8802.1.1.2.1.5.3791.1.3.1.1.4 | INTEGER {off(0), configured(1), running(2)} | read-only | current |
| lldpXPnoRemPortStatusRT3 OBJECT-TYPE This value represents the status of the corresponding port of the remote system according to RT class 3. A value of off(0) means that there isn't any RT3 capability available for this port. When the port is configured for RT3 mode, but the mode isn't active yet the value will be configured(1). When the port is ready for transmission and reception of RT3 traffic, the port status will be running(4). | 1.0.8802.1.1.2.1.5.3791.1.3.1.1.5 | INTEGER {off(0), configured(1), up(2), down(3), running(4)} | read-only | current |
| lldpXPnoRemPortNoS OBJECT-TYPE The PROFINET NameofStation of the remote partner. If the station isn't configured yet, the value of this object will be the MAC address of the device as a string. | 1.0.8802.1.1.2.1.5.3791.1.3.1.1.6 | DisplayString | read-only | current |
| lldpXPnoRemPortMrpUuId OBJECT-TYPE The UUID of the MRP domain to which the corresponding port of the remote system belongs to. If the port doesn't belong to a MRP domain, the value must be NIL ('0000000000000000'). | 1.0.8802.1.1.2.1.5.3791.1.3.1.1.7 | OCTET STRING (SIZE(16)) | read-only | current |
| lldpXPnoRemPortMrrtStatus OBJECT-TYPE This object reports the status of the MRRT entity of the corresponding port. A value of off(0) means that there isn't any MRRT capability available for this port or it is switched off. The value configured(1) indicates that MRRT is configured for the port. When MRRT is active on the port, the value will be up(2). | 1.0.8802.1.1.2.1.5.3791.1.3.1.1.8 | INTEGER {off(0), configured(1), up(2)} | read-only | current |
| lldpXPnoConformance OBJECT-IDENTITY | 1.0.8802.1.1.2.1.5.3791.2 | |||
| lldpXPnoCompliances OBJECT-IDENTITY | 1.0.8802.1.1.2.1.5.3791.2.1 | |||
| lldpXPnoGroups OBJECT-IDENTITY | 1.0.8802.1.1.2.1.5.3791.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| lldpXPnoCompliance MODULE-COMPLIANCE The compliance statement for SNMP entities which implement the PNO organizationally defined LLDP extension MIB. | 1.0.8802.1.1.2.1.5.3791.2.1.1 | current |
| lldpXPnoConfigGroup OBJECT-GROUP The collection of objects which are used to configure the PNO organizationally defined LLDP extension implementation behavior. This group is mandatory for agents which implement the PNO organizationally defined LLDP extension, because the information about the signal propagation delay is necessary to configure PROFINET domains. | 1.0.8802.1.1.2.1.5.3791.2.2.1 | current |
| lldpXPnoLocGroup OBJECT-GROUP The collection of objects which are used to configure the PNO organizationally defined LLDP extension implementation behavior. This group is mandatory for agents which implement the PNO organizationally defined LLDP extension, because the information about the signal propagation delay is necessary to configure PROFINET domains. | 1.0.8802.1.1.2.1.5.3791.2.2.2 | current |
| lldpXPnoRemGroup OBJECT-GROUP The collection of objects which are used to configure the PNO organizationally defined LLDP extension implementation behavior. This group is mandatory for agents which implement the PNO organizationally defined LLDP extension, because the information about the signal propagation delay is necessary to configure PROFINET domains. | 1.0.8802.1.1.2.1.5.3791.2.2.3 | current |
| lldpXPnoMRPGroup OBJECT-GROUP The collection of objects which are used to configure the PNO organizationally defined LLDP extension implementation behavior. This group is mandatory for agents which implement the PNO organizationally defined LLDP extension, because the information about the signal propagation delay is necessary to configure PROFINET domains. | 1.0.8802.1.1.2.1.5.3791.2.2.4 | current |