LLDP-EXT-HM-MIB
- Registered at
- 1.0.8802.1.1.2.1.5.32867
- Last updated
- 2008-09-12 12:00
- Organization
- Hirschmann Automation & Control
- Revisions
- 2008-09-12 12:00
- Namespace
- standard
- Source file
LLDP-EXT-HM-MIB- Digest
sha256:0909e20b7622692c584bbdb9ca15d679d53e5e99a09651e078d733d45861d89a
Description
The LLDP Management Information Base extension module for Hirschmann organizationally defined discovery information. In order to assure the uniqueness of the LLDP-MIB, lldpXHmMIB is branched from lldpExtensions using the Hirschmann OUI value as the node.
Contact
URL: www.hirschmann-ac.com Contact: Oliver Kleineberg Postal: Hirschmann Automation & Control Stuttgarter Strasse 45-51 DE-72654 Neckartenzlingen Germany Tel: +49-7127-14-1035 Fax: +49-7127-14-1561 E-mail: oliver.kleineberg@hirschmann.de
Imports
| From | Symbols |
|---|---|
| LLDP-MIB | lldpExtensions, lldpLocPortNum, lldpPortConfigEntry, lldpRemIndex, lldpRemLocalPortNum, lldpRemTimeMark |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANA-ADDRESS-FAMILY-NUMBERS-MIB IANAifType-MIB IF-MIB LLDP-EXT-HM-MIB LLDP-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| LldpXHmLocGMRPServiceReqSyntax TEXTUAL-CONVENTION (1) corresponds to forward All Multicast Groups requirement (2) corresponds to forward Unregistered Multicast Groups requirement (3) not applicable If GMRP is not configured on the interface, the value should be set to 3 and the field should not be evaluated. | current | |||
| LldpXHmLocIGMPVersionSyntax TEXTUAL-CONVENTION This bitmap shows which IGMP version is configured on the local device: Bit(0): a 1 indicates IGMPv1 configured. Bit(1): a 1 indicates IGMPv2 configured. Bit(2): a 1 indicates IGMPv2 configured. All IGMP Versions are mutually exclusive, so only one bit should be set at any given time. If all bits are set to 0, IGMP is not configured on the device. | current | |||
| LldpXHmLocPTPStatusSyntax TEXTUAL-CONVENTION This bitmap shows which PTP versions are enabled on the local system: Bit(0): a 1 indicates that PTPv1 is enabled Bit(1): a 1 indicates that PTPv2 is enabled Both bits should not be set simultaneously, as either only PTPv1 or PTPv2 can be enabled on a device. If no bits are set, no PTP standard is enabled on the port/device and all following fields should be set to (0) or similar (e.g. not applicable). | current | |||
| LldpXHmLocPTPSupportSyntax TEXTUAL-CONVENTION This bitmap shows which PTP versions are supported by the local system, based on installed hardware: Bit(0): a 1 indicates that PTP is supported in software only Bit(1): a 1 indicates that PTPv1 is supported Bit(2): a 1 indicates that PTPv2 is supported Bit(3): a 1 indicates that PTPTC is supported PTPTC indicates the capability to act as a PTP transparent clock. If no bits are set, the device does not support any PTP standard and all following fields should be set to (0) or (not applicable). | current | |||
| LldpXHmLocPTPv2DataTransferSyntax TEXTUAL-CONVENTION This Integer is only viable if PTPv2 is enabled. It shows the data transfer type configured on the local port and device. If only PTPv1 is enabled or no PTP available, this should be set to 4 and not evaluated. | current | |||
| LldpXHmLocPTPv2DelayMechanismSyntax TEXTUAL-CONVENTION This Integer is only viable if PTPv2 is enabled. It shows the delay mechanism configured on the local port and device. If only PTPv1 is enabled or no PTP available, this should be set to 4 and not evaluated. | current | |||
| LldpXHmLocPortSecModeSyntax TEXTUAL-CONVENTION This Integer Value Shows the 802.1X Port Security configuration for a local port: (1) not applicable, no 802.1X support or not configured (2) force Authorized, general port access without authorization (3) force Unauthorized, no general port access, even with autorization (4) automatic, access based on successful authorization | current | |||
| LldpXHmRemGMRPServiceReqSyntax TEXTUAL-CONVENTION (1) corresponds to forward All Multicast Groups requirement (2) corresponds to forward Unregistered Multicast Groups requirement If GMRP is not configured on the interface, the value should be set to 3 and the field should not be evaluated. | current | |||
| LldpXHmRemIGMPVersionSyntax TEXTUAL-CONVENTION Shows which IGMP version is configured on the remote device: Bit(0): a 1 indicates IGMPv1 configured. Bit(1): a 1 indicates IGMPv2 configured. Bit(2): a 1 indicates IGMPv2 configured. All IGMP Versions are mutually exclusive, so only one bit should be set to 1 at any given time. If all bits are set to 0, IGMP is not configured on the device. | current | |||
| LldpXHmRemPTPStatusSyntax TEXTUAL-CONVENTION This Bitmap shows which PTP versions are enabled on the remote system: Bit(0): a 1 indicates that PTPv1 is enabled Bit(1): a 1 indicates that PTPv2 is enabled Both bits should not be set simultaneously, as either only PTPv1 or PTPv2 can be enabled on a device. If no bits are set, no PTP standard is enabled on the port/device and all following fields should be set to (0) or similar (e.g. not applicable). | current | |||
| LldpXHmRemPTPSupportSyntax TEXTUAL-CONVENTION This bitmap shows which PTP versions are supported by the remote system, based on installed hardware: Bit(0): a 1 indicates that PTP is supported in software only Bit(1): a 1 indicates that PTPv1 is supported Bit(2): a 1 indicates that PTPv2 is supported Bit(3): a 1 indicates that PTPTC is supported PTPTC indicates the capability to act as a PTP transparent clock. If no bits are set, the device does not support any PTP standard and all following fields should be set to (0) or (not applicable). | current | |||
| LldpXHmRemPTPv2DataTransferSyntax TEXTUAL-CONVENTION This field is only viable if PTPv2 is enabled. It shows the data transfer type configured on the remote port and device. If only PTPv1 is enabled or no PTP available, this should be set to 4 and not evaluated. | current | |||
| LldpXHmRemPTPv2DelayMechanismSyntax TEXTUAL-CONVENTION This field is only viable if PTPv2 is enabled. It shows the delay mechanism configured on the remote port and device. If only PTPv1 is enabled or no PTP available, this should be set to 4 and not evaluated. | current | |||
| LldpXHmRemPortSecModeSyntax TEXTUAL-CONVENTION This Integer Value Shows the 802.1X Port Security configuration for a remote port: (1) not applicable, no 802.1X support or not configured (2) force Authorized, general port access without authorization (3) force Unauthorized, no general port access, even with autorization (4) automatic, access based on successful authorization | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| lldpXHmObjects OBJECT-IDENTITY | 1.0.8802.1.1.2.1.5.32867.1 | |||
| lldpXHmConfig OBJECT-IDENTITY | 1.0.8802.1.1.2.1.5.32867.1.1 | |||
| lldpXHmConfigGMRPTable OBJECT-TYPE A table that controls GMRP LLDP TLV Information to be transmitted on individual ports. | 1.0.8802.1.1.2.1.5.32867.1.1.1 | not-accessible | current | |
| lldpXHmConfigGMRPEntry OBJECT-TYPE LLDP configuration information that controls the transmission of Hirschmann GMRP organizationally defined Configuration TLV on LLDP transmission capable ports. This configuration object augments the lldpPortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpPortConfigEntry entry. Each active lldpConfigEntry must be restored from non-volatile storage (along with the corresponding lldpPortConfigEntry) after a re-initialization of the management system. | 1.0.8802.1.1.2.1.5.32867.1.1.1.1 | not-accessible | current | |
| lldpXHmConfigGMRPTxEnable OBJECT-TYPE The lldpXHmConfigGMRPTxEnable, which is defined as a truth value and configured by the network management, determines whether the Hirschmann GMRP organizationally defined port TLV transmission is allowed on a given LLDP transmission capable port. The value of this object must be restored from non-volatile storage after a re-initialization of the management system. | 1.0.8802.1.1.2.1.5.32867.1.1.1.1.1 | TruthValue | read-write | current |
| lldpXHmConfigIGMPTable OBJECT-TYPE A table that controls IGMP LLDP TLV Information to be transmitted on individual ports. | 1.0.8802.1.1.2.1.5.32867.1.1.2 | not-accessible | current | |
| lldpXHmConfigIGMPEntry OBJECT-TYPE LLDP configuration information that controls the transmission of Hirschmann IGMP organizationally defined Configuration TLV on LLDP transmission capable ports. This configuration object augments the lldpPortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpPortConfigEntry entry. Each active lldpConfigEntry must be restored from non-volatile storage (along with the corresponding lldpPortConfigEntry) after a re-initialization of the management system. | 1.0.8802.1.1.2.1.5.32867.1.1.2.1 | not-accessible | current | |
| lldpXHmConfigIGMPTxEnable OBJECT-TYPE The lldpXHmConfigIGMPTxEnable, which is defined as a truth value and configured by the network management, determines whether the Hirschmann IGMP organizationally defined port TLV transmission is allowed on a given LLDP transmission capable port. The value of this object must be restored from non-volatile storage after a re-initialization of the management system. | 1.0.8802.1.1.2.1.5.32867.1.1.2.1.1 | TruthValue | read-write | current |
| lldpXHmConfigPortSecTable OBJECT-TYPE A table that controls 802.1X Port Security LLDP TLV Information to be transmitted on individual ports. | 1.0.8802.1.1.2.1.5.32867.1.1.3 | not-accessible | current | |
| lldpXHmConfigPortSecEntry OBJECT-TYPE LLDP configuration information that controls the transmission of Hirschmann 802.1X Port Security organizationally defined Configuration TLV on LLDP transmission capable ports. This configuration object augments the lldpPortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpPortConfigEntry entry. Each active lldpConfigEntry must be restored from non-volatile storage (along with the corresponding lldpPortConfigEntry) after a re-initialization of the management system. | 1.0.8802.1.1.2.1.5.32867.1.1.3.1 | not-accessible | current | |
| lldpXHmConfigPortSecTxEnable OBJECT-TYPE The lldpXHmConfigPortSecTxEnable, which is defined as a truth value and configured by the network management, determines whether the Hirschmann 802.1X Port Security organizationally defined port TLV transmission is allowed on a given LLDP transmission capable port. The value of this object must be restored from non-volatile storage after a re-initialization of the management system. | 1.0.8802.1.1.2.1.5.32867.1.1.3.1.1 | TruthValue | read-write | current |
| lldpXHmConfigPTPTable OBJECT-TYPE A table that controls PTP LLDP TLV Information to be transmitted on individual ports. | 1.0.8802.1.1.2.1.5.32867.1.1.4 | not-accessible | current | |
| lldpXHmConfigPTPEntry OBJECT-TYPE LLDP configuration information that controls the transmission of Hirschmann PTP organizationally defined Configuration TLV on LLDP transmission capable ports. This configuration object augments the lldpPortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpPortConfigEntry entry. Each active lldpConfigEntry must be restored from non-volatile storage (along with the corresponding lldpPortConfigEntry) after a re-initialization of the management system. | 1.0.8802.1.1.2.1.5.32867.1.1.4.1 | not-accessible | current | |
| lldpXHmConfigPTPTxEnable OBJECT-TYPE The lldpXHmConfigPTPTxEnable, which is defined as a truth value and configured by the network management, determines whether the Hirschmann PTP organizationally defined port TLV transmission is allowed on a given LLDP transmission capable port. The value of this object must be restored from non-volatile storage after a re-initialization of the management system. | 1.0.8802.1.1.2.1.5.32867.1.1.4.1.1 | TruthValue | read-write | current |
| lldpXHmLocalData OBJECT-IDENTITY | 1.0.8802.1.1.2.1.5.32867.1.2 | |||
| lldpXHmLocGMRPTable OBJECT-TYPE This table contains one or more rows per Port and GMRP information about each port of the local system. GMRP is a protocol used for constraining IP Multicast traffic defined by the IEEE in standard 802.1p, published in standard 802.1D | 1.0.8802.1.1.2.1.5.32867.1.2.1 | not-accessible | current | |
| lldpXHmLocGMRPEntry OBJECT-TYPE GMRP Information about a particular port component. | 1.0.8802.1.1.2.1.5.32867.1.2.1.1 | not-accessible | current | |
| lldpXHmLocGMRPSupport OBJECT-TYPE The truth value used to indicate whether the given port (associated with the local system) supports GMRP. If this is set to (false), all following fields should be set to not applicable and should not be evaluated. | 1.0.8802.1.1.2.1.5.32867.1.2.1.1.1 | TruthValue | read-only | current |
| lldpXHmLocGMRPStatus OBJECT-TYPE The truth value used to indicate whether GMRP is enabled on the the given port associated with the local system. If this is set to (false), all following fields should be set to not applicable and should not be evaluated. | 1.0.8802.1.1.2.1.5.32867.1.2.1.1.2 | TruthValue | read-only | current |
| lldpXHmLocGMRPServiceReq OBJECT-TYPE Integer value, used to indicate which GMRP service requirement is enabled on the the given port associated with the local system. | 1.0.8802.1.1.2.1.5.32867.1.2.1.1.3 | LldpXHmLocGMRPServiceReqSyntax | read-only | current |
| lldpXHmLocIGMPTable OBJECT-TYPE This table contains one or more rows per Port and IGMP information about each port of the local system. IGMP is a protocol used for constraining IP multicast traffic specified in IETF RFCs 1112, 2236(IGMPv2) and 3376(IGMPv3) | 1.0.8802.1.1.2.1.5.32867.1.2.2 | not-accessible | current | |
| lldpXHmLocIGMPEntry OBJECT-TYPE IGMP Information about a particular port component. | 1.0.8802.1.1.2.1.5.32867.1.2.2.1 | not-accessible | current | |
| lldpXHmLocIGMPSupport OBJECT-TYPE The truth value used to indicate whether the given port (associated with the local system) supports IGMP. If this is set to (false), all following fields should be set to not applicable and should not be evaluated. | 1.0.8802.1.1.2.1.5.32867.1.2.2.1.1 | TruthValue | read-only | current |
| lldpXHmLocIGMPStatus OBJECT-TYPE The truth value used to indicate whether IGMP is enabled on the the given port associated with the local system. If this is set to (false), all following fields should be set to not applicable and should not be evaluated. | 1.0.8802.1.1.2.1.5.32867.1.2.2.1.2 | TruthValue | read-only | current |
| lldpXHmLocIGMPVersion OBJECT-TYPE This bitmap shows which IGMP version is configured on the local device. | 1.0.8802.1.1.2.1.5.32867.1.2.2.1.3 | LldpXHmLocIGMPVersionSyntax | read-only | current |
| lldpXHmLocPortSecTable OBJECT-TYPE This table contains one or more rows per Port and 802.1X Port Security information about each port of the local system. IEEE 802.1X Port Security is a standard, defining rules for a port based network access control with a client/supplicant requesting access to the network from an authenticator/RADIUS server | 1.0.8802.1.1.2.1.5.32867.1.2.3 | not-accessible | current | |
| lldpXHmLocPortSecEntry OBJECT-TYPE 802.1X Port Security Information about a particular port component. | 1.0.8802.1.1.2.1.5.32867.1.2.3.1 | not-accessible | current | |
| lldpXHmLocPortSecSupport OBJECT-TYPE The truth value used to indicate whether the given port (associated with the local system) supports 802.1X Port Security. If this is set to (false), all following fields should be set to not applicable and should not be evaluated. | 1.0.8802.1.1.2.1.5.32867.1.2.3.1.1 | TruthValue | read-only | current |
| lldpXHmLocPortSecStatus OBJECT-TYPE The truth value used to indicate whether 802.1X Port Security is enabled on the the given port associated with the local system. If this is set to (false), all following fields should be set to not applicable and should not be evaluated. | 1.0.8802.1.1.2.1.5.32867.1.2.3.1.2 | TruthValue | read-only | current |
| lldpXHmLocPortSecMode OBJECT-TYPE This Integer value contains informations about a local ports 802.1X configuration. | 1.0.8802.1.1.2.1.5.32867.1.2.3.1.3 | LldpXHmLocPortSecModeSyntax | read-only | current |
| lldpXHmLocPTPTable OBJECT-TYPE This table contains one or more rows per Port and PTP information about the local system. The Precision Time Protocol (PTP) is defined in IEEE Standard 1588 and describes a protocol for network (system) clock synchronization with very high precision. | 1.0.8802.1.1.2.1.5.32867.1.2.4 | not-accessible | current | |
| lldpXHmLocPTPEntry OBJECT-TYPE Port and PTP Information about a particular port component | 1.0.8802.1.1.2.1.5.32867.1.2.4.1 | not-accessible | current | |
| lldpXHmLocPTPSupport OBJECT-TYPE This bitmap shows which PTP versions are supported by the local system, based on installed hardware | 1.0.8802.1.1.2.1.5.32867.1.2.4.1.1 | LldpXHmLocPTPSupportSyntax | read-only | current |
| lldpXHmLocPTPStatus OBJECT-TYPE This bitmap shows which PTP versions are enabled on the local system | 1.0.8802.1.1.2.1.5.32867.1.2.4.1.2 | LldpXHmLocPTPStatusSyntax | read-only | current |
| lldpXHmLocPTPSyncInterval OBJECT-TYPE This Integer shows the PTPv1 and PTPv2 Synchronization Interval. If no PTP is available or configured, this value should be set to -128. | 1.0.8802.1.1.2.1.5.32867.1.2.4.1.3 | Integer32 (-128..127) | read-only | current |
| lldpXHmLocPTPv2AnnounceInterval OBJECT-TYPE This Integer shows the PTPv2 Announce Interval. If PTPv2 is not configured or available, this should be set to -128. | 1.0.8802.1.1.2.1.5.32867.1.2.4.1.4 | Integer32 (-128..127) | read-only | current |
| lldpXHmLocPTPv2DataTransfer OBJECT-TYPE This Integer shows the enabled PTPv2 data transfer method. | 1.0.8802.1.1.2.1.5.32867.1.2.4.1.5 | LldpXHmLocPTPv2DataTransferSyntax | read-only | current |
| lldpXHmLocPTPv2DelayMechanism OBJECT-TYPE This Integer shows the enabled PTPv2 delay mechanism | 1.0.8802.1.1.2.1.5.32867.1.2.4.1.6 | LldpXHmLocPTPv2DelayMechanismSyntax | read-only | current |
| lldpXHmLocPTPClockValues OBJECT-TYPE This bitmap shows, which clock type(s) are configured on a specific port and/or device: Bit (0) set to 1 indicates a slave clock Bit (1) set to 1 indicates a master clock Bit (2) set to 1 indicates a transparent clock Bit (3) set to 1 indicates a boundary clock Bit (4) set to 1 indicates a grandmaster clock Bit (5) set to 1 indicates a clock in multi domain mode Bit (6) set to 1 indicates a clock in simple mode If no PTP is configured, all bits should be set to 0. | 1.0.8802.1.1.2.1.5.32867.1.2.4.1.7 | Bits {slave(0), master(1), transparent(2), boundary(3), grandmaster(4), multidomain(5), simplemode(6)} | read-only | current |
| lldpXHmLocPTPv2SubdomainNumber OBJECT-TYPE This Integer shows the PTPv2 subdomain number configured on the local device. In case PTPv1 is configured, this value is of no relevance and will not be evaluated. | 1.0.8802.1.1.2.1.5.32867.1.2.4.1.8 | Integer32 (0..255) | read-only | current |
| lldpXHmLocPTPv1SubdomainName OBJECT-TYPE This Octet String contains the PTPv1 subdomain name, an ASCII String with a maximum of 16 characters length, configured on the local device. If PTPv2 or no PTP is configured, this should be set to 0. | 1.0.8802.1.1.2.1.5.32867.1.2.4.1.9 | OCTET STRING (SIZE(0..16)) | read-only | current |
| lldpXHmRemoteData OBJECT-IDENTITY | 1.0.8802.1.1.2.1.5.32867.1.3 | |||
| lldpXHmRemGMRPTable OBJECT-TYPE This table contains one or more rows per Port and GMRP information about the remote system. GMRP is a protocol used for constraining IP Multicast traffic defined by the IEEE in standard 802.1p, published in standard 802.1D | 1.0.8802.1.1.2.1.5.32867.1.3.1 | not-accessible | current | |
| lldpXHmRemGMRPEntry OBJECT-TYPE GMRP Information about a particular port component. | 1.0.8802.1.1.2.1.5.32867.1.3.1.1 | not-accessible | current | |
| lldpXHmRemGMRPSupport OBJECT-TYPE The truth value used to indicate whether the given port (associated with the remote system) supports GMRP. If this is set to (false), all following fields should be set to not applicable and should not be evaluated. | 1.0.8802.1.1.2.1.5.32867.1.3.1.1.1 | TruthValue | read-only | current |
| lldpXHmRemGMRPStatus OBJECT-TYPE The truth value used to indicate whether GMRP is enabled on the the given port associated with the remote system. If this is set to (false), all following fields should be set to not applicable and should not be evaluated. | 1.0.8802.1.1.2.1.5.32867.1.3.1.1.2 | TruthValue | read-only | current |
| lldpXHmRemGMRPServiceReq OBJECT-TYPE Integer value, used to indicate which GMRP service requirement is enabled on the the given port associated with the remote system. | 1.0.8802.1.1.2.1.5.32867.1.3.1.1.3 | LldpXHmRemGMRPServiceReqSyntax | read-only | current |
| lldpXHmRemIGMPTable OBJECT-TYPE This table contains one or more rows per Port and IGMP information about each port of the remote system. IGMP is a protocol used for constraining IP multicast traffic specified in IETF RFCs 1112, 2236(IGMPv2) and 3376(IGMPv3) | 1.0.8802.1.1.2.1.5.32867.1.3.2 | not-accessible | current | |
| lldpXHmRemIGMPEntry OBJECT-TYPE IGMP Information about a particular port component. | 1.0.8802.1.1.2.1.5.32867.1.3.2.1 | not-accessible | current | |
| lldpXHmRemIGMPSupport OBJECT-TYPE The truth value used to indicate whether the given port (associated with the remote system) supports IGMP. If this is set to (false), all following fields should be set to not applicable and should not be evaluated. | 1.0.8802.1.1.2.1.5.32867.1.3.2.1.1 | TruthValue | read-only | current |
| lldpXHmRemIGMPStatus OBJECT-TYPE The truth value used to indicate whether IGMP is enabled on the the given port associated with the remote system. If this is set to (false), all following fields should be set to not applicable and should not be evaluated. | 1.0.8802.1.1.2.1.5.32867.1.3.2.1.2 | TruthValue | read-only | current |
| lldpXHmRemIGMPVersion OBJECT-TYPE This bitmap shows which IGMP version is configured on the remote device. | 1.0.8802.1.1.2.1.5.32867.1.3.2.1.3 | LldpXHmRemIGMPVersionSyntax | read-only | current |
| lldpXHmRemPortSecTable OBJECT-TYPE This table contains one or more rows per Port and 802.1X Port Security information about each port of the remote system. IEEE 802.1X Port Security is a standard, defining rules for a port based network access control with a client/supplicant requesting access to the network from an authenticator/RADIUS server | 1.0.8802.1.1.2.1.5.32867.1.3.3 | not-accessible | current | |
| lldpXHmRemPortSecEntry OBJECT-TYPE 802.1X Port Security Information about a particular port component. | 1.0.8802.1.1.2.1.5.32867.1.3.3.1 | not-accessible | current | |
| lldpXHmRemPortSecSupport OBJECT-TYPE The truth value used to indicate whether the given port (associated with the remote system) supports 802.1X Port Security. If this is set to (false), all following fields should be set to not applicable and should not be evaluated. | 1.0.8802.1.1.2.1.5.32867.1.3.3.1.1 | TruthValue | read-only | current |
| lldpXHmRemPortSecStatus OBJECT-TYPE The truth value used to indicate whether 802.1X Port Security is enabled on the the given port associated with the remote system. If this is set to (false), all following fields should be set to not applicable and should not be evaluated. | 1.0.8802.1.1.2.1.5.32867.1.3.3.1.2 | TruthValue | read-only | current |
| lldpXHmRemPortSecMode OBJECT-TYPE This Integer value contains informations about a remote ports 802.1X configuration. | 1.0.8802.1.1.2.1.5.32867.1.3.3.1.3 | LldpXHmRemPortSecModeSyntax | read-only | current |
| lldpXHmRemPTPTable OBJECT-TYPE This table contains one or more rows per Port and PTP information about the remote system. The Precision Time Protocol (PTP) is defined in IEEE Standard 1588 and describes a protocol for network (system) clock synchronization with very high precision. | 1.0.8802.1.1.2.1.5.32867.1.3.4 | not-accessible | current | |
| lldpXHmRemPTPEntry OBJECT-TYPE Port and PTP Information about a particular port component | 1.0.8802.1.1.2.1.5.32867.1.3.4.1 | not-accessible | current | |
| lldpXHmRemPTPSupport OBJECT-TYPE Shows which PTP versions are supported by the remote system, based on installed hardware | 1.0.8802.1.1.2.1.5.32867.1.3.4.1.1 | LldpXHmRemPTPSupportSyntax | read-only | current |
| lldpXHmRemPTPStatus OBJECT-TYPE Shows which PTP versions are enabled on the remote system | 1.0.8802.1.1.2.1.5.32867.1.3.4.1.2 | LldpXHmRemPTPStatusSyntax | read-only | current |
| lldpXHmRemPTPSyncInterval OBJECT-TYPE Shows the PTPv1 and PTPv2 Synchronization Interval. If no PTP is available or configured, this value should be set to -128. | 1.0.8802.1.1.2.1.5.32867.1.3.4.1.3 | Integer32 (-128..127) | read-only | current |
| lldpXHmRemPTPv2AnnounceInterval OBJECT-TYPE Shows the PTPv2 Announce Interval. If PTPv2 is not configured or available, this should be set to -128. | 1.0.8802.1.1.2.1.5.32867.1.3.4.1.4 | Integer32 (-128..127) | read-only | current |
| lldpXHmRemPTPv2DataTransfer OBJECT-TYPE This field is only viable if PTPv2 is enabled. It shows the data transfer type configured on the remote port and device. | 1.0.8802.1.1.2.1.5.32867.1.3.4.1.5 | LldpXHmRemPTPv2DataTransferSyntax | read-only | current |
| lldpXHmRemPTPv2DelayMechanism OBJECT-TYPE Shows the enabled PTPv2 delay mechanism | 1.0.8802.1.1.2.1.5.32867.1.3.4.1.6 | LldpXHmRemPTPv2DelayMechanismSyntax | read-only | current |
| lldpXHmRemPTPClockValues OBJECT-TYPE Shows, which clock type(s) are configured on a specific remote port and/or device: Bit (0) set to 1 indicates a slave clock Bit (1) set to 1 indicates a master clock Bit (2) set to 1 indicates a transparent clock Bit (3) set to 1 indicates a boundary clock Bit (4) set to 1 indicates a grandmaster clock Bit (5) set to 1 indicates a clock in multi domain mode Bit (6) set to 1 indicates a clock in simple mode If no PTP is configured, all bits should be set to 0. | 1.0.8802.1.1.2.1.5.32867.1.3.4.1.7 | Bits {slave(0), master(1), transparent(2), boundary(3), grandmaster(4), multidomain(5), simplemode(6)} | read-only | current |
| lldpXHmRemPTPv2SubdomainNumber OBJECT-TYPE Shows the PTPv2 subdomain number configured on the remote device. In case PTPv1 is configured, this value is of no relevance and will not be evaluated. | 1.0.8802.1.1.2.1.5.32867.1.3.4.1.8 | Integer32 (0..255) | read-only | current |
| lldpXHmRemPTPv1SubdomainName OBJECT-TYPE This Octet String contains the PTPv1 subdomain name, an ASCII String with a maximum of 16 characters length, configured on the remote device. If PTPv2 is configured, this field should be set to 0. | 1.0.8802.1.1.2.1.5.32867.1.3.4.1.9 | OCTET STRING (SIZE(0..16)) | read-only | current |